* Set .owner for various KVM file_operations so that files refcount the
KVM module until KVM is done executing _all_ code, including the last
few instructions of kvm_put_kvm(). And then revert the misguided
attempt to rely on "struct kvm" refcounts to pin KVM-the-module.
ARM:
* Do not redo the mapping of vLPIs, if they have already been mapped
s390:
* Do not leave bits behind in PTEs
* Properly catch page invalidations that affect the prefix of a nested
guest
x86:
* When checking if a _running_ vCPU is "in-kernel", i.e. running at CPL0,
get the CPL directly instead of relying on preempted_in_kernel (which
is valid if and only if the vCPU was preempted, i.e. NOT running).
* Fix a benign "return void" that was recently introduced.
Selftests:
* Makefile tweak for dependency generation
* -Wformat fix
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmVzhWMUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMd3QgArPrc1tHKb5RAv3/OGxUhgmmKcYFz
AERbxrzcEv25MjCy6wfb+WzOTud/7KM113oVwHpkWbPaOdR/NteCeNrypCOiFnxB
BzKOdm23A8UmjgFlwYpIlukmn51QT2iMWfIQDetDboRpRPlIZ6AOQpIHph99K0J1
xMlXKbd4eaeIS+FoqJGD2wlKDkMZmrQD1SjndLp7xtPjRBZQzVTcMg/fKJNcDLAg
xIfecCeeU4/lJ0fQlnnO5a4L3gCzJnSGLKYvLgBkX4sC1yFr959WAnqSn8mb+1wT
jQtsmCg7+GCuNF5mn4nF/YnnuD7+xgbpGKVGlHhKCmmvmbi74NVm5SBNgA==
=aZLl
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Generic:
- Set .owner for various KVM file_operations so that files refcount
the KVM module until KVM is done executing _all_ code, including
the last few instructions of kvm_put_kvm(). And then revert the
misguided attempt to rely on "struct kvm" refcounts to pin
KVM-the-module.
ARM:
- Do not redo the mapping of vLPIs, if they have already been mapped
s390:
- Do not leave bits behind in PTEs
- Properly catch page invalidations that affect the prefix of a
nested guest
x86:
- When checking if a _running_ vCPU is "in-kernel", i.e. running at
CPL0, get the CPL directly instead of relying on
preempted_in_kernel (which is valid if and only if the vCPU was
preempted, i.e. NOT running).
- Fix a benign "return void" that was recently introduced.
Selftests:
- Makefile tweak for dependency generation
- '-Wformat' fix"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Update EFER software model on CR0 trap for SEV-ES
KVM: selftests: add -MP to CFLAGS
KVM: selftests: Actually print out magic token in NX hugepages skip message
KVM: x86: Remove 'return void' expression for 'void function'
Revert "KVM: Prevent module exit until all VMs are freed"
KVM: Set file_operations.owner appropriately for all such structures
KVM: x86: Get CPL directly when checking if loaded vCPU is in kernel mode
KVM: arm64: GICv4: Do not perform a map to a mapped vLPI
KVM: s390/mm: Properly reset no-dat
KVM: s390: vsie: fix wrong VIR 37 when MSO is used
- Avoid mapping vLPIs that have already been mapped
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCZWub4QAKCRCivnWIJHzd
FnZPAP9KlyKZTy3RvczIy4imn+DebrASAApmREkAIvfmz9wFzQD+Lg8AfxPAMz8E
e9eNpTZ48Zqzmas93/eu1t6ZpcJOZQA=
=fyc9
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master
KVM/arm64 fixes for 6.7, take #1
- Avoid mapping vLPIs that have already been mapped
Most of the changes are devicetree fixes for NXP, Mediatek, Rockchips
Arm machines as well as Microchip RISC-V, and most of these address
build-time warnings for spec violations and other minor issues. One of
the Mediatek warnings was enabled by default and prevented a clean build.
The ones that address serious runtime issues are all on the i.MX platform:
- a boot time panic on imx8qm
- USB hanging under load on imx8
- regressions on the imx93 ethernet phy
Code fixes include a minor error handling for the i.MX PMU driver, and
a number of firmware driver fixes:
- OP-TEE fix for supplicant based device enumeration, and a new
sysfs attribute to needed to fix a race against userspace
- Arm SCMI fix for possible truncation/overflow in the frequency
computations
- Multiple FF-A fixes for the newly added notification support.
-----BEGIN PGP SIGNATURE-----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=mw0X
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Most of the changes are devicetree fixes for NXP, Mediatek, Rockchips
Arm machines as well as Microchip RISC-V, and most of these address
build-time warnings for spec violations and other minor issues. One of
the Mediatek warnings was enabled by default and prevented a clean
build.
The ones that address serious runtime issues are all on the i.MX
platform:
- a boot time panic on imx8qm
- USB hanging under load on imx8
- regressions on the imx93 ethernet phy
Code fixes include a minor error handling for the i.MX PMU driver, and
a number of firmware driver fixes:
- OP-TEE fix for supplicant based device enumeration, and a new sysfs
attribute to needed to fix a race against userspace
- Arm SCMI fix for possible truncation/overflow in the frequency
computations
- Multiple FF-A fixes for the newly added notification support"
* tag 'soc-fixes-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (55 commits)
MAINTAINERS: change the S32G2 maintainer's email address.
arm64: dts: rockchip: Fix eMMC Data Strobe PD on rk3588
ARM: dts: imx28-xea: Pass the 'model' property
ARM: dts: imx7: Declare timers compatible with fsl,imx6dl-gpt
MAINTAINERS: reinstate freescale ARM64 DT directory in i.MX entry
arm64: dts: imx8-apalis: set wifi regulator to always-on
ARM: imx: Check return value of devm_kasprintf in imx_mmdc_perf_init
arm64: dts: imx8ulp: update gpio node name to align with register address
arm64: dts: imx93: update gpio node name to align with register address
arm64: dts: imx93: correct mediamix power
arm64: dts: imx8qm: Add imx8qm's own pm to avoid panic during startup
arm64: dts: freescale: imx8-ss-dma: Fix #pwm-cells
arm64: dts: freescale: imx8-ss-lsio: Fix #pwm-cells
dt-bindings: pwm: imx-pwm: Unify #pwm-cells for all compatibles
ARM: dts: imx6ul-pico: Describe the Ethernet PHY clock
arm64: dts: imx8mp: imx8mq: Add parkmode-disable-ss-quirk on DWC3
arm64: dts: rockchip: Fix PCI node addresses on rk3399-gru
arm64: dts: rockchip: drop interrupt-names property from rk3588s dfi
firmware: arm_scmi: Fix possible frequency truncation when using level indexing mode
firmware: arm_scmi: Fix frequency truncation by promoting multiplier type
...
All over the place this time. From adapting the size of the vdec nodes
on rk3328 and rk3399, fixing some wrong pinctrl settings on rk3128 and
the Turing RK1 board, emmc-settings fixes on rk3588 and interrupt-name
mishaps, down to some dt-cleanups.
Also this adds the missing rockchip,rk3588-pmugrf compatible to the soc
grf binding, that I somehow messed up during the pull requests for the
-rc1 . At least with it included the dt-checker is happier.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmVyLSQQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgUk0CACba9tJmqxTLFf3y7jszGMf3N0ziIX8Hson
6WSqbrkKJDzbUMYP+LO+yd0Bi8i0h2hC0XY0COnuvPS/JvWAsVrKNeoAri0XbjAr
uoULhiFC79+JKBM8u05RIel/gR+nrCX+fm7ZX42/80TeCe9u7xnI9mF6xjwPcqdS
XXWUboj1YOBu5x9VfqYK4ZoH160ggE612aX50tsWAoFGSPw9AatAz+TyuCN4T3Fw
UoTIAF2z0m46mUFkTDw8jhpqNAE5nXYQsJ3EqrDZoXmCNRG7P4L+n3yhZ/hJfWDZ
uagsKbj75eUbq1FhTlOJLK3wspK1ea1JAGemPnzk1hVHSNfXjzsu
=xEds
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=YVAn
-----END PGP SIGNATURE-----
Merge tag 'v6.7-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Devicetree fixes for the 6.7-cycle.
All over the place this time. From adapting the size of the vdec nodes
on rk3328 and rk3399, fixing some wrong pinctrl settings on rk3128 and
the Turing RK1 board, emmc-settings fixes on rk3588 and interrupt-name
mishaps, down to some dt-cleanups.
Also this adds the missing rockchip,rk3588-pmugrf compatible to the soc
grf binding, that I somehow messed up during the pull requests for the
-rc1 . At least with it included the dt-checker is happier.
* tag 'v6.7-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Fix eMMC Data Strobe PD on rk3588
arm64: dts: rockchip: Fix PCI node addresses on rk3399-gru
arm64: dts: rockchip: drop interrupt-names property from rk3588s dfi
arm64: dts: rockchip: Fix Turing RK1 interrupt pinctrls
ARM: dts: rockchip: Fix sdmmc_pwren's pinmux setting for RK3128
arm64: dts: rockchip: minor whitespace cleanup around '='
ARM: dts: rockchip: minor whitespace cleanup around '='
dt-bindings: soc: rockchip: grf: add rockchip,rk3588-pmugrf
arm64: dts: rockchip: fix rk356x pcie msg interrupt name
arm64: dts: rockchip: Expand reg size of vdec node for RK3399
arm64: dts: rockchip: Expand reg size of vdec node for RK3328
Link: https://lore.kernel.org/r/2709704.mvXUDI8C0e@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A MAINTAINERS update to reinstate freescale ARM64 DT directory in i.MX
entry.
- A series from Alexander Stein to fix #pwm-cells for imx8-ss.
- A series from Haibo Chen to fix GPIO node name for i.MX93 and
i.MX8ULP.
- Add parkmode-disable-ss-quirk for DWC3 on i.MX8MP and i.MX8MQ to fix
an issue that the controller may hang when processing transactions
under heavy USB traffic from multiple endpoints.
- Fix mediamix block power on/off for i.MX93 by correcting the power
domain clock to be 'nic_media'.
- A couple of Ethernet PHY clock regression fixes for imx6ul-pico and
imx6q-skov board.
- Fix edma3 power domain for i.MX8QM to fix a panic during startup
process.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmVxFsoUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM4RoQgAnIQmAJj9heZ3tQpImqdLxQVfNFIf
nlvLU76yf600IrUAkIT+ctQx9R5pDjIVI+9iYlgUfTI6oPLk7GqHYKyPwPwW2EUb
vu+8tfFVDicekP4x01MidYTgx1JOq8IG/YdXDNpcA9RmavViL1xIQQDo0zbQEm8K
Dv1WfS/hinWQZ2W9gxfr6uTXVZJYXa0LeCFLY8FVCY9J7Am2OTvYW1I5bLqUI4Wx
g8LXPJ/iBtK4+0dxdOjmzTsAm8TVw0kGcbOcZTyalWoW6cxCPAQlNJc6sFVwa3eV
ghdZn0ldm85jEHBphfbn+QCaYQHLjDnpZnamaKZYpgZEt7ifv4sNmb7FmQ==
=tC65
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=K7FV
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.7:
- A MAINTAINERS update to reinstate freescale ARM64 DT directory in i.MX
entry.
- A series from Alexander Stein to fix #pwm-cells for imx8-ss.
- A series from Haibo Chen to fix GPIO node name for i.MX93 and
i.MX8ULP.
- Add parkmode-disable-ss-quirk for DWC3 on i.MX8MP and i.MX8MQ to fix
an issue that the controller may hang when processing transactions
under heavy USB traffic from multiple endpoints.
- Fix mediamix block power on/off for i.MX93 by correcting the power
domain clock to be 'nic_media'.
- A couple of Ethernet PHY clock regression fixes for imx6ul-pico and
imx6q-skov board.
- Fix edma3 power domain for i.MX8QM to fix a panic during startup
process.
* tag 'imx-fixes-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx28-xea: Pass the 'model' property
ARM: dts: imx7: Declare timers compatible with fsl,imx6dl-gpt
MAINTAINERS: reinstate freescale ARM64 DT directory in i.MX entry
arm64: dts: imx8-apalis: set wifi regulator to always-on
ARM: imx: Check return value of devm_kasprintf in imx_mmdc_perf_init
arm64: dts: imx8ulp: update gpio node name to align with register address
arm64: dts: imx93: update gpio node name to align with register address
arm64: dts: imx93: correct mediamix power
arm64: dts: imx8qm: Add imx8qm's own pm to avoid panic during startup
arm64: dts: freescale: imx8-ss-dma: Fix #pwm-cells
arm64: dts: freescale: imx8-ss-lsio: Fix #pwm-cells
dt-bindings: pwm: imx-pwm: Unify #pwm-cells for all compatibles
ARM: dts: imx6ul-pico: Describe the Ethernet PHY clock
arm64: dts: imx8mp: imx8mq: Add parkmode-disable-ss-quirk on DWC3
ARM: dts: imx6q: skov: fix ethernet clock regression
arm64: dt: imx93: tqma9352-mba93xxla: Fix LPUART2 pad config
Link: https://lore.kernel.org/r/20231207005202.GF270430@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes for various MediaTek SoCs, including
MT7986: - eMMC HS400 mode failures
- Cooling trips for emergency system shutdown
- BPI-R3 machine SFP power limit and active cooling
MT8173: - EVB device tree unit_address_vs_reg warning
MT8183: - unit_address_vs_reg and simple_bus_reg warnings
- Kukui device tree nodes naming consistency and
adhering to bindings
- Jacuzzi device tree unnecessary cells removed as
those were producing avoid_unnecessary_addr_size
MT8186: - Power domains faults due to incorrect clocks
- GPU speed bin nvmem cell name was wrong, producing
issues with interpreting the speedbin with GPU OPPs
MT8195: - Local Arbiter (and whole system) ability to suspend
- Cherry device tree interrupts_property warning
...and another unit_address_vs_reg warning on MT7622.
-----BEGIN PGP SIGNATURE-----
iJ4EABYKAEYWIQQn3Xxr56ypAcSHzXSaNgTPrZeEeAUCZWcZhCgcYW5nZWxvZ2lv
YWNjaGluby5kZWxyZWdub0Bjb2xsYWJvcmEuY29tAAoJEJo2BM+tl4R49tYBANX0
WggACQ4isTc2G1GCfniB9V74PElrQ90WWK/+2hCGAQDbifsclG7CNBEa7gVICsPR
+tcHAymKO/9ytwiAAwdUAA==
=Z7D9
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Gh3C
-----END PGP SIGNATURE-----
Merge tag 'mtk-dts64-fixes-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into arm/fixes
MediaTek ARM64 DeviceTree fixes for v6.7
Fixes for various MediaTek SoCs, including
MT7986: - eMMC HS400 mode failures
- Cooling trips for emergency system shutdown
- BPI-R3 machine SFP power limit and active cooling
MT8173: - EVB device tree unit_address_vs_reg warning
MT8183: - unit_address_vs_reg and simple_bus_reg warnings
- Kukui device tree nodes naming consistency and
adhering to bindings
- Jacuzzi device tree unnecessary cells removed as
those were producing avoid_unnecessary_addr_size
MT8186: - Power domains faults due to incorrect clocks
- GPU speed bin nvmem cell name was wrong, producing
issues with interpreting the speedbin with GPU OPPs
MT8195: - Local Arbiter (and whole system) ability to suspend
- Cherry device tree interrupts_property warning
...and another unit_address_vs_reg warning on MT7622.
* tag 'mtk-dts64-fixes-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
arm64: dts: mediatek: cherry: Fix interrupt cells for MT6360 on I2C7
arm64: dts: mediatek: mt8183-kukui-jacuzzi: fix dsi unnecessary cells properties
arm64: dts: mediatek: mt7622: fix memory node warning check
arm64: dts: mediatek: mt8186: fix clock names for power domains
arm64: dts: mediatek: mt8186: Change gpu speedbin nvmem cell name
arm64: dts: mt7986: change cooling trips
arm64: dts: mt7986: define 3W max power to both SFP on BPI-R3
arm64: dts: mt7986: fix emmc hs400 mode without uboot initialization
arm64: dts: mt8183: kukui: Fix underscores in node names
arm64: dts: mediatek: mt8183: Move thermal-zones to the root node
arm64: dts: mediatek: mt8173-evb: Fix regulator-fixed node names
arm64: dts: mediatek: mt8183-evb: Fix unit_address_vs_reg warning on ntc
arm64: dts: mediatek: mt8183: Fix unit address for scp reserved memory
arm64: dts: mediatek: mt8195: Fix PM suspend/resume with venc clocks
Link: https://lore.kernel.org/r/20231129113905.134732-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
JEDEC standard JESD84-B51 defines the eMMC Data Strobe line, which is
currently used only in HS400 mode, as a device->host clock signal that
"is used only in read operation. The Data Strobe is always High-Z (not
driven by the device and pulled down by RDS) or Driven Low in write
operation, except during CRC status response." RDS is a pull-down
resistor specified in the 10K-100K ohm range. Thus per the standard, the
Data Strobe is always pulled to ground (by the eMMC and/or RDS) during
write operations.
Evidently, the eMMC host controller in the RK3588 considers an active
voltage on the eMMC-DS line during a write to be an error.
The default (i.e. hardware reset, and Rockchip BSP) behavior for the
RK3588 is to activate the eMMC-DS pin's builtin pull-down. As a result,
many RK3588 board designers do not bother adding a dedicated RDS
resistor, instead relying on the RK3588's internal bias. The current
devicetree, however, disables this bias (`pcfg_pull_none`), breaking
HS400-mode writes for boards without a dedicated RDS, but with an eMMC
chip that chooses to High-Z (instead of drive-low) the eMMC-DS line.
(The Turing RK1 is one such board.)
Fix this by changing the bias in the (common) emmc_data_strobe case to
reflect the expected hardware/BSP behavior. This is unlikely to cause
regressions elsewhere: the pull-down is only relevant for High-Z eMMCs,
and if this is redundant with a (dedicated) RDS resistor, the effective
result is only a lower resistance to ground -- where the range of
tolerance is quite high. If it does, it's better fixed in the specific
devicetrees.
Fixes: d85f8a5c79 ("arm64: dts: rockchip: Add rk3588 pinctrl data")
Signed-off-by: Sam Edwards <CFSworks@gmail.com>
Link: https://lore.kernel.org/r/20231205202900.4617-2-CFSworks@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Make sure that the wifi regulator is always on. The wifi driver itself
puts the wifi module into suspend mode. If we cut the power the driver
will crash when resuming from suspend.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Fixes: ad0de4ceb7 ("arm64: dts: freescale: add initial apalis imx8 aka quadmax module support")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
"nic_media" clock should be enabled when power on/off mediamix, otherwise
power on/off will fail. Because "media_axi_root" clock is the parent of
"nic_media" clock, so replace "media_axi_clock" clock with "nic_media"
clock in mediamix node.
Link: ce18e6d007
Fixes: f2d03ba997 ("arm64: dts: imx93: reorder device nodes")
Fixes: e85d3458a8 ("arm64: dts: imx93: add src node")
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX8QM/QXP supports inverted PWM output, thus #pwm-cells needs to be set
to 3.
Fixes: 23fa99b205 ("arm64: dts: freescale: imx8-ss-lsio: add support for lsio_pwm0-3")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The i.MX8MP and i.MX8MQ devices both use the same DWC3 controller and
are both affected by a known issue with the controller due to specific
behaviour when park mode is enabled in SuperSpeed host mode operation.
Under heavy USB traffic from multiple endpoints the controller will
sometimes incorrectly process transactions such that some transactions
are lost, or the controller may hang when processing transactions. When
the controller hangs it does not recover.
This issue is documented partially within the linux-imx vendor kernel
which references a Synopsys STAR number 9001415732 in commits [1] and
additional details in [2]. Those commits provide some additional
controller internal implementation specifics around the incorrect
behaviour of the SuperSpeed host controller operation when park mode is
enabled.
The summary of this issue is that the host controller can incorrectly
enter/exit park mode such that part of the controller is in a state
which behaves as if in park mode even though it is not. In this state
the controller incorrectly calculates the number of TRBs available which
results in incorrect access of the internal caches causing the overwrite
of pending requests in the cache which should have been processed but
are ignored. This can cause the controller to drop the requests or hang
waiting for the pending state of the dropped requests.
The workaround for this issue is to disable park mode for SuperSpeed
operation of the controller through the GUCTL1[17] bit. This is already
available as a quirk for the DWC3 controller and can be enabled via the
'snps,parkmode-disable-ss-quirk' device tree property.
It is possible to replicate this failure on an i.MX8MP EVK with a USB
Hub connecting 4 SuperSpeed USB flash drives. Performing continuous
small read operations (dd if=/dev/sd... of=/dev/null bs=16) on the block
devices will result in device errors initially and will eventually
result in the controller hanging.
[13240.896936] xhci-hcd xhci-hcd.0.auto: WARN Event TRB for slot 4 ep 2 with no TDs queued?
[13240.990708] usb 2-1.3: reset SuperSpeed USB device number 5 using xhci-hcd
[13241.015582] sd 2:0:0:0: [sdc] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=DRIVER_OK cmd_age=0s
[13241.025198] sd 2:0:0:0: [sdc] tag#0 CDB: opcode=0x28 28 00 00 00 03 e0 00 01 00 00
[13241.032949] I/O error, dev sdc, sector 992 op 0x0:(READ) flags 0x80700 phys_seg 25 prio class 2
[13272.150710] usb 2-1.2: reset SuperSpeed USB device number 4 using xhci-hcd
[13272.175469] sd 1:0:0:0: [sdb] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x03 driverbyte=DRIVER_OK cmd_age=31s
[13272.185365] sd 1:0:0:0: [sdb] tag#0 CDB: opcode=0x28 28 00 00 00 03 e0 00 01 00 00
[13272.193385] I/O error, dev sdb, sector 992 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2
[13434.846556] xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command
[13434.854592] xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead
[13434.862553] xhci-hcd xhci-hcd.0.auto: HC died; cleaning up
[1] 97a5349d93
[2] b4b5cbc5a1
Fixes: fb8587a2c1 ("arm64: dtsi: imx8mp: add usb nodes")
Fixes: ad37549cb5 ("arm64: dts: imx8mq: add USB nodes")
Signed-off-by: Nathan Rossi <nathan.rossi@digi.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The rk3399-gru PCI node addresses are wrong.
In rk3399-gru-scarlet, the bus number in the address should be 0. This is
because bus number assignment is dynamic and not known up front. For FDT,
the bus number is simply ignored.
In rk3399-gru-chromebook, the addresses are simply invalid. The first
"reg" entry must be the configuration space for the device. The entry
should be all 0s except for device/slot and function numbers. The existing
64-bit memory space (0x83000000) entries are not valid because they must
have the BAR address in the lower byte of the first cell.
Warnings for these are enabled by adding the missing 'device_type = "pci"'
for the root port node.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231130191830.2424361-1-robh@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The dfi binding does not specify interrupt names, with the interrupts
just specifying channels 0-x. So drop the unspecified property.
Fixes: 5a6976b104 ("arm64: dts: rockchip: Add DFI to rk3588s")
Reported-by: Jagan Teki <jagan@edgeble.ai>
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Link: https://lore.kernel.org/r/20231201134859.322491-1-heiko@sntech.de
The pinctrls for the hym8563 interrupt line and fan-tach input
were both mistakenly defined as `pcfg_pull_none`. As these are
active-low signals (level-triggered, in the hym8563 case) which
may not be driven at times, these should really be pull-up. The
lack of any bias results in spurious interrupts.
Fix this by modifying the `rockchip,pins` properties as necessary
to enable the pull-up resistors.
Fixes: 2806a69f3f ("arm64: dts: rockchip: Add Turing RK1 SoM support")
Signed-off-by: Sam Edwards <CFSworks@gmail.com>
Link: https://lore.kernel.org/r/20231202071212.1606800-1-CFSworks@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Commit 42c5a3b04b refactored the KPTI init code in a way that results
in the use of non-global kernel mappings even on systems that have no
need for it, and even when KPTI has been disabled explicitly via the
command line.
Ensure that this only happens when we have decided (based on the
detected system-wide CPU features) that KPTI should be enabled.
Fixes: 42c5a3b04b ("arm64: Split kpti_install_ng_mappings()")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20231127120049.2258650-6-ardb@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
dtbs_check throws a warning at the dsi node:
Warning (avoid_unnecessary_addr_size): /soc/dsi@14014000: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Other DTS have a panel child node with a reg, so the parent dtsi
must have the address-cells and size-cells, however this specific DT
has the panel removed, but not the cells, hence the warning above.
If panel is deleted then the cells must also be deleted since they are
tied together, as the child node in this DT does not have a reg.
Cc: stable@vger.kernel.org
Fixes: cabc71b08e ("arm64: dts: mt8183: Add kukui-jacuzzi-damu board")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230814071053.5459-1-eugen.hristev@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
dtbs_check throws a warning at the memory node:
Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name
fix by adding the address into the node name.
Cc: stable@vger.kernel.org
Fixes: 0b6286dd96 ("arm64: dts: mt7622: add bananapi BPI-R64 board")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230814065042.4973-1-eugen.hristev@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Clocks for each power domain are split into big categories: pd clocks
and subsys clocks.
According to the binding, all clocks which have a dash '-' in their name
are treated as subsys clocks, and must be placed at the end of the list.
The other clocks which are pd clocks must come first.
Fixed the naming and the placing of all clocks in the power domains.
For the avoidance of doubt, prefixed all subsys clocks with the 'subsys'
prefix. The binding does not enforce strict clock names, the driver
uses them in bulk, only making a difference for pd clocks vs subsys clocks.
The above problem appears to be trivial, however, it leads to incorrect
power up and power down sequence of the power domains, because some
clocks will be mistakenly taken for subsys clocks and viceversa.
One consequence is the fact that if the DIS power domain goes power down
and power back up during the boot process, when it comes back up, there
are still transactions left on the bus which makes the display inoperable.
Some of the clocks for the DIS power domain were wrongly using '_' instead
of '-', which again made these clocks being treated as pd clocks instead of
subsys clocks.
Cc: stable@vger.kernel.org
Fixes: d9e43c1e7a ("arm64: dts: mt8186: Add power domains controller")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20231005103041.352478-1-eugen.hristev@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
MT8186's GPU speedbin value must be interpreted, or the value will not
be meaningful.
Use the correct "gpu-speedbin" nvmem cell name for the GPU speedbin to
allow triggering the cell info fixup handler, hence feeding the right
speedbin number to the users.
Cc: stable@vger.kernel.org
Fixes: 263d2fd02a ("arm64: dts: mediatek: mt8186: Add GPU speed bin NVMEM cells")
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20231005151150.355536-1-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add Critical and hot trips for emergency system shutdown and limiting
system load.
Change passive trip to active to make sure fan is activated on the
lowest trip.
Cc: stable@vger.kernel.org
Fixes: 1f5be05132 ("arm64: dts: mt7986: add thermal-zones")
Fixes: c26f779a22 ("arm64: dts: mt7986: add pwm-fan and cooling-maps to BPI-R3 dts")
Suggested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231025170832.78727-4-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
All SFP power supplies are connected to the system VDD33 which is 3v3/8A.
Set 3A per SFP slot to allow SFPs work which need more power than the
default 1W.
Cc: stable@vger.kernel.org
Fixes: 8e01fb15b8 ("arm64: dts: mt7986: add Bananapi R3")
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231025170832.78727-3-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Replace underscores with hyphens in pinctrl node names both for consistency
and to adhere to the bindings.
Cc: stable@vger.kernel.org
Fixes: cd894e274b ("arm64: dts: mt8183: Add krane-sku176 board")
Fixes: 1652dbf736 ("arm64: dts: mt8183: add scp node")
Fixes: 27eaf34df3 ("arm64: dts: mt8183: config dsi node")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231026191343.3345279-2-hsinyi@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The NTC is defined as ntc@0 but it doesn't need any address at all.
Fix the unit_address_vs_reg warning by dropping the unit address: since
the node name has to be generic also fully rename it from ntc@0 to
thermal-sensor.
Cc: stable@vger.kernel.org
Fixes: ff9ea5c622 ("arm64: dts: mediatek: mt8183-evb: Add node for thermistor")
Link: https://lore.kernel.org/r/20231025093816.44327-7-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Before suspending the LARBs we're making sure that any operation is
done: this never happens because we are unexpectedly unclocking the
LARB20 before executing the suspend handler for the MediaTek Smart
Multimedia Interface (SMI) and the cause of this is incorrect clocks
on this LARB.
Fix this issue by changing the Local Arbiter 20 (used by the video
encoder secondary core) apb clock to CLK_VENC_CORE1_VENC;
furthermore, in order to make sure that both the PM resume and video
encoder operation is stable, add the CLK_VENC(_CORE1)_LARB clock to
the VENC (main core) and VENC_CORE1 power domains, as this IP cannot
communicate with the rest of the system (the AP) without local
arbiter clocks being operational.
Cc: stable@vger.kernel.org
Fixes: 3b5838d1d8 ("arm64: dts: mt8195: Add iommu and smi nodes")
Fixes: 2b515194bf ("arm64: dts: mt8195: Add power domains controller")
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230706095841.109315-1-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
LPUART2_RTS# has an external pull-down, so do not enable the internal
pull-up at the same time, use a pull-down instead.
Fixes: c982ecfa79 ("arm64: dts: freescale: add initial device tree for MBa93xxLA SBC board")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
A common issue in Makefile is a race in parallel building.
You need to be careful to prevent multiple threads from writing to the
same file simultaneously.
Commit 3939f33450 ("ARM: 8418/1: add boot image dependencies to not
generate invalid images") addressed such a bad scenario.
A similar symptom occurs with the following command:
$ make -j$(nproc) ARCH=arm64 Image vmlinuz.efi
[ snip ]
SORTTAB vmlinux
OBJCOPY arch/arm64/boot/Image
OBJCOPY arch/arm64/boot/Image
AS arch/arm64/boot/zboot-header.o
PAD arch/arm64/boot/vmlinux.bin
GZIP arch/arm64/boot/vmlinuz
OBJCOPY arch/arm64/boot/vmlinuz.o
LD arch/arm64/boot/vmlinuz.efi.elf
OBJCOPY arch/arm64/boot/vmlinuz.efi
The log "OBJCOPY arch/arm64/boot/Image" is displayed twice.
It indicates that two threads simultaneously enter arch/arm64/boot/
and write to arch/arm64/boot/Image.
It occasionally leads to a build failure:
$ make -j$(nproc) ARCH=arm64 Image vmlinuz.efi
[ snip ]
SORTTAB vmlinux
OBJCOPY arch/arm64/boot/Image
PAD arch/arm64/boot/vmlinux.bin
truncate: Invalid number: 'arch/arm64/boot/vmlinux.bin'
make[2]: *** [drivers/firmware/efi/libstub/Makefile.zboot:13:
arch/arm64/boot/vmlinux.bin] Error 1
make[2]: *** Deleting file 'arch/arm64/boot/vmlinux.bin'
make[1]: *** [arch/arm64/Makefile:163: vmlinuz.efi] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:234: __sub-make] Error 2
vmlinuz.efi depends on Image, but such a dependency is not specified
in arch/arm64/Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: SImon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/r/20231119053234.2367621-1-masahiroy@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When CONFIG_RODATA_FULL_DEFAULT_ENABLED=y, passing "rodata=on" on the
kernel command-line (rather than "rodata=full") should turn off the
"full" behaviour, leaving writable linear aliases of read-only kernel
memory. Unfortunately, the option has no effect in this situation and
the only way to disable the "rodata=full" behaviour is to disable rodata
protection entirely by passing "rodata=off".
Fix this by parsing the "on" and "off" options in the arch code,
additionally enforcing that 'rodata_full' cannot be set without also
setting 'rodata_enabled', allowing us to simplify a couple of checks
in the process.
Fixes: 2e8cff0a0e ("arm64: fix rodata=full")
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20231117131422.29663-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Before performing a map, let's check whether the vLPI has been
mapped.
Fixes: 196b136498 ("KVM: arm/arm64: GICv4: Wire mapping/unmapping of VLPIs in VFIO irq bypass")
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20231120131210.2039-1-jiangkunkun@huawei.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The expected name by the binding at this position is "msg" and the SoC's
manual also calls the interrupt in question "msg", so fix the rk356x dtsi
to use the correct name.
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20231114153834.934978-1-heiko@sntech.de
Expand the reg size for the vdec node to include cache/performance
registers the rkvdec driver writes to. Also add missing clocks to the
related power-domain.
Fixes: cbd7214402 ("arm64: dts: rockchip: Define the rockchip Video Decoder node on rk3399")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20231105233630.3927502-10-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Expand the reg size for the vdec node to include cache/performance
registers the rkvdec driver writes to.
Fixes: 17408c9b11 ("arm64: dts: rockchip: Add vdec support for RK3328")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20231105233630.3927502-9-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
- Documentation update: Add a note about argument and return value
fetching is the best effort because it depends on the type.
- objpool: Fix to make internal global variables static in
test_objpool.c.
- kprobes: Unify kprobes_exceptions_nofify() prototypes. There are
the same prototypes in asm/kprobes.h for some architectures, but
some of them are missing the prototype and it causes a warning.
So move the prototype into linux/kprobes.h.
- tracing: Fix to check the tracepoint event and return event at
parsing stage. The tracepoint event doesn't support %return
but if $retval exists, it will be converted to %return silently.
This finds that case and rejects it.
- tracing: Fix the order of the descriptions about the parameters
of __kprobe_event_gen_cmd_start() to be consistent with the
argument list of the function.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmVOwAQbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bItMH/0F/vyiirgLrRVvQ+5Tr
Hm32oc1BQzxnQ0+9bjzk3r90KYk5cysBEEqxKzgxq9/RsJdyCczQUpxYehU0BoZT
1B4pB5eQ0DwcdGAVk4TyBRYVBb3uhCyyZNXv+F60AsO8i87fHHoJXT9SoKK+Vgx4
MAklE1gnxFFlRoYCBQpks89NajRx6n3aEL4/oXO3WYSrv+H2WGtZamB+RhpufkDx
Qx5TkIGnjulcW6J5m7Px5N3z9AX00SbfooZHAae3fqsek5RPNecfc1/WiANNXrSm
SYsG/i1jcHVvmk2YmCVokVLPKzhCOsKIuiW91rBu/Tu6lqiJmC+fxWxuZqAdXFUi
+kw=
=uymB
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- Documentation update: Add a note about argument and return value
fetching is the best effort because it depends on the type.
- objpool: Fix to make internal global variables static in
test_objpool.c.
- kprobes: Unify kprobes_exceptions_nofify() prototypes. There are the
same prototypes in asm/kprobes.h for some architectures, but some of
them are missing the prototype and it causes a warning. So move the
prototype into linux/kprobes.h.
- tracing: Fix to check the tracepoint event and return event at
parsing stage. The tracepoint event doesn't support %return but if
$retval exists, it will be converted to %return silently. This finds
that case and rejects it.
- tracing: Fix the order of the descriptions about the parameters of
__kprobe_event_gen_cmd_start() to be consistent with the argument
list of the function.
* tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/kprobes: Fix the order of argument descriptions
tracing: fprobe-event: Fix to check tracepoint event and return
kprobes: unify kprobes_exceptions_nofify() prototypes
lib: test_objpool: make global variables static
Documentation: tracing: Add a note about argument and retval access
- Move the MediaTek GIC quirk handling from irqchip to core. Before the
merging window commit 44bd78dd2b ("irqchip/gic-v3: Disable pseudo
NMIs on MediaTek devices w/ firmware issues") temporarily addressed
this issue. Fixed now at a deeper level in the arch code.
- Reject events meant for other PMUs in the CoreSight PMU driver,
otherwise some of the core PMU events would disappear.
- Fix the Armv8 PMUv3 driver driver to not truncate 64-bit registers,
causing some events to be invisible.
- Remove duplicate declaration of __arm64_sys##name following the patch
to avoid prototype warning for syscalls.
- Typos in the elf_hwcap documentation.
-----BEGIN PGP SIGNATURE-----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=c+Yt
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Mostly PMU fixes and a reworking of the pseudo-NMI disabling on broken
MediaTek firmware:
- Move the MediaTek GIC quirk handling from irqchip to core. Before
the merging window commit 44bd78dd2b ("irqchip/gic-v3: Disable
pseudo NMIs on MediaTek devices w/ firmware issues") temporarily
addressed this issue. Fixed now at a deeper level in the arch code
- Reject events meant for other PMUs in the CoreSight PMU driver,
otherwise some of the core PMU events would disappear
- Fix the Armv8 PMUv3 driver driver to not truncate 64-bit registers,
causing some events to be invisible
- Remove duplicate declaration of __arm64_sys##name following the
patch to avoid prototype warning for syscalls
- Typos in the elf_hwcap documentation"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/syscall: Remove duplicate declaration
Revert "arm64: smp: avoid NMI IPIs with broken MediaTek FW"
arm64: Move MediaTek GIC quirk handling from irqchip to core
arm64/arm: arm_pmuv3: perf: Don't truncate 64-bit registers
perf: arm_cspmu: Reject events meant for other PMUs
Documentation/arm64: Fix typos in elf_hwcaps
Most architectures that support kprobes declare this function in their
own asm/kprobes.h header and provide an override, but some are missing
the prototype, which causes a warning for the __weak stub implementation:
kernel/kprobes.c:1865:12: error: no previous prototype for 'kprobe_exceptions_notify' [-Werror=missing-prototypes]
1865 | int __weak kprobe_exceptions_notify(struct notifier_block *self,
Move the prototype into linux/kprobes.h so it is visible to all
the definitions.
Link: https://lore.kernel.org/all/20231108125843.3806765-4-arnd@kernel.org/
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Commit 6ac19f9651 ("arm64: avoid prototype warnings for syscalls")
added missing declarations to various syscall wrapper macros. It
however proved a little too zealous in __SYSCALL_DEFINEx(), as a
declaration for __arm64_sys##name was already present. A declaration
is required before the call to ALLOW_ERROR_INJECTION(), so keep
the original one and remove the new one.
Fixes: 6ac19f9651 ("arm64: avoid prototype warnings for syscalls")
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231109141153.250046-1-kevin.brodsky@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This reverts commit a07a594152.
This is no longer needed after the patch ("arm64: Move MediaTek GIC
quirk handling from irqchip to core).
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231107072651.v2.2.I2c5fa192e767eb3ee233bc28eb60e2f8656c29a6@changeid
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In commit 44bd78dd2b ("irqchip/gic-v3: Disable pseudo NMIs on
MediaTek devices w/ firmware issues") we added a method for detecting
MediaTek devices with broken firmware and disabled pseudo-NMI. While
that worked, it didn't address the problem at a deep enough level.
The fundamental issue with this broken firmware is that it's not
saving and restoring several important GICR registers. The current
list is believed to be:
* GICR_NUM_IPRIORITYR
* GICR_CTLR
* GICR_ISPENDR0
* GICR_ISACTIVER0
* GICR_NSACR
Pseudo-NMI didn't work because it was the only thing (currently) in
the kernel that relied on the broken registers, so forcing pseudo-NMI
off was an effective fix. However, it could be observed that calling
system_uses_irq_prio_masking() on these systems still returned
"true". That caused confusion and led to the need for
commit a07a594152 ("arm64: smp: avoid NMI IPIs with broken MediaTek
FW"). It's worried that the incorrect value returned by
system_uses_irq_prio_masking() on these systems will continue to
confuse future developers.
Let's fix the issue a little more completely by disabling IRQ
priorities at a deeper level in the kernel. Once we do this we can
revert some of the other bits of code dealing with this quirk.
This includes a partial revert of commit 44bd78dd2b
("irqchip/gic-v3: Disable pseudo NMIs on MediaTek devices w/ firmware
issues"). This isn't a full revert because it leaves some of the
changes to the "quirks" structure around in case future code needs it.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231107072651.v2.1.Ide945748593cffd8ff0feb9ae22b795935b944d6@changeid
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Support for controlling the second core in Mediatek's SCP dual-core
setup is introduced.
Support for audio, compute and modem DSPs on Qualcomm SM6375, and the
audio DSP in SC7180 are introduced. The peripheral NoC clock is
dropped from MSM8996 modem DSP, as this is handled through the
interconnect provider.
In the zynqmp driver the setup for TCM memory, and device address
translation thereof, when operating in lockstep mode is corrected.
A few bug fixes and cleanups are introduces across the ST and STM32
remoteproc drivers.
-----BEGIN PGP SIGNATURE-----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=E1ta
-----END PGP SIGNATURE-----
Merge tag 'rproc-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"Support for controlling the second core in Mediatek's SCP dual-core
setup is introduced.
Support for audio, compute and modem DSPs on Qualcomm SM6375, and the
audio DSP in SC7180 are introduced. The peripheral NoC clock is
dropped from MSM8996 modem DSP, as this is handled through the
interconnect provider.
In the zynqmp driver the setup for TCM memory, and device address
translation thereof, when operating in lockstep mode is corrected.
A few bug fixes and cleanups are introduces across the ST and STM32
remoteproc drivers"
* tag 'rproc-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (28 commits)
remoteproc: st: Fix sometimes uninitialized ret in st_rproc_probe()
remoteproc: st: Use device_get_match_data()
remoteproc: zynqmp: Change tcm address translation method
remoteproc: mediatek: Refactor single core check and fix retrocompatibility
remoteproc: qcom: q6v5-mss: Remove PNoC clock from 8996 MSS
dt-bindings: remoteproc: qcom,msm8996-mss-pil: Remove PNoC clock
dt-bindings: remoteproc: qcom,adsp: Remove AGGRE2 clock
remoteproc: qcom: pas: Add SM6375 MPSS
remoteproc: qcom: pas: Add SM6375 ADSP & CDSP
dt-bindings: remoteproc: qcom,sm6375-pas: Document remoteprocs
dt-bindings: remoteproc: pru: Add Interrupt property
remoteproc: qcom: pas: Add sc7180 adsp
dt-bindings: remoteproc: qcom: sc7180-pas: Add ADSP compatible
arm64: dts: mediatek: Update the node name of SCP rpmsg subnode
remoteproc: zynqmp: fix TCM carveouts in lockstep mode
remoteproc: mediatek: Refine ipi handler error message
remoteproc: mediatek: Report watchdog crash to all cores
remoteproc: mediatek: Handle MT8195 SCP core 1 watchdog timeout
remoteproc: mediatek: Setup MT8195 SCP core 1 SRAM offset
remoteproc: mediatek: Remove dependency of MT8195 SCP L2TCM power control on dual-core SCP
...
The driver used to truncate several 64-bit registers such as PMCEID[n]
registers used to describe whether architectural and microarchitectural
events in range 0x4000-0x401f exist. Due to discarding the bits, the
driver made the events invisible, even if they existed.
Moreover, PMCCFILTR and PMCR registers have additional bits in the upper
32 bits. This patch makes them available although they aren't currently
used. Finally, functions handling PMXEVCNTR and PMXEVTYPER registers are
removed as they not being used at all.
Fixes: df29ddf4f0 ("arm64: perf: Abstract system register accesses away")
Reported-by: Carl Worth <carl@os.amperecomputing.com>
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Acked-by: Will Deacon <will@kernel.org>
Closes: https://lore.kernel.org/..
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20231102183012.1251410-1-ilkka@os.amperecomputing.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
- Implement the binary search in modpost for faster symbol lookup
- Respect HOSTCC when linking host programs written in Rust
- Change the binrpm-pkg target to generate kernel-devel RPM package
- Fix endianness issues for tee and ishtp MODULE_DEVICE_TABLE
- Unify vdso_install rules
- Remove unused __memexit* annotations
- Eliminate stale whitelisting for __devinit/__devexit from modpost
- Enable dummy-tools to handle the -fpatchable-function-entry flag
- Add 'userldlibs' syntax
-----BEGIN PGP SIGNATURE-----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=PeX7
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Implement the binary search in modpost for faster symbol lookup
- Respect HOSTCC when linking host programs written in Rust
- Change the binrpm-pkg target to generate kernel-devel RPM package
- Fix endianness issues for tee and ishtp MODULE_DEVICE_TABLE
- Unify vdso_install rules
- Remove unused __memexit* annotations
- Eliminate stale whitelisting for __devinit/__devexit from modpost
- Enable dummy-tools to handle the -fpatchable-function-entry flag
- Add 'userldlibs' syntax
* tag 'kbuild-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
kbuild: support 'userldlibs' syntax
kbuild: dummy-tools: pretend we understand -fpatchable-function-entry
kbuild: Correct missing architecture-specific hyphens
modpost: squash ALL_{INIT,EXIT}_TEXT_SECTIONS to ALL_TEXT_SECTIONS
modpost: merge sectioncheck table entries regarding init/exit sections
modpost: use ALL_INIT_SECTIONS for the section check from DATA_SECTIONS
modpost: disallow the combination of EXPORT_SYMBOL and __meminit*
modpost: remove EXIT_SECTIONS macro
modpost: remove MEM_INIT_SECTIONS macro
modpost: remove more symbol patterns from the section check whitelist
modpost: disallow *driver to reference .meminit* sections
linux/init: remove __memexit* annotations
modpost: remove ALL_EXIT_DATA_SECTIONS macro
kbuild: simplify cmd_ld_multi_m
kbuild: avoid too many execution of scripts/pahole-flags.sh
kbuild: remove ARCH_POSTLINK from module builds
kbuild: unify no-compiler-targets and no-sync-config-targets
kbuild: unify vdso_install rules
docs: kbuild: add INSTALL_DTBS_PATH
UML: remove unused cmd_vdso_install
...
