Support for booting the iMX remoteprocs using MMIO, instead of SMCCC is
added. The iMX driver is also extended to support delivering interrupts
from an arbitrary number of vdev.
Support is added to the TI PRU driver, to allow GPMUX to be controlled
from DeviceTree.
The Qualcomm coredump collector is extended to fall back to generating a
full coredump, in the case that the loaded firmware doesn't support
generating minidump. The overly terse MD abbreviation of "MINIDUMP" is
expanded, to make the code easier on the eye.
The list of Qualcomm Sensor Low Power Island (SLPI) instances supported
is cleaned up, and SDM845 is added. SDM630/636/660 support for the modem
subsystem (mss) is added.
All the Qualcomm drivers are transitioned to of_reserved_mem_lookup()
instead of open coding the resolution of reserved-memory regions, to
gain handling of error cases. A couple of drivers are transitioned to
use devm_platform_ioremap_resource_byname().
The stm32 remoteproc driver's PM operations are updated to modern
macros, to avoid the "unused variable"-warning in some configurations.
Drivers are transitioned away from directly including of_device.h.
-----BEGIN PGP SIGNATURE-----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=BV3w
-----END PGP SIGNATURE-----
Merge tag 'rproc-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"Support for booting the iMX remoteprocs using MMIO, instead of SMCCC
is added. The iMX driver is also extended to support delivering
interrupts from an arbitrary number of vdev.
Support is added to the TI PRU driver, to allow GPMUX to be controlled
from DeviceTree.
The Qualcomm coredump collector is extended to fall back to generating
a full coredump, in the case that the loaded firmware doesn't support
generating minidump. The overly terse MD abbreviation of "MINIDUMP" is
expanded, to make the code easier on the eye.
The list of Qualcomm Sensor Low Power Island (SLPI) instances
supported is cleaned up, and SDM845 is added. SDM630/636/660 support
for the modem subsystem (mss) is added.
All the Qualcomm drivers are transitioned to of_reserved_mem_lookup()
instead of open coding the resolution of reserved-memory regions, to
gain handling of error cases. A couple of drivers are transitioned to
use devm_platform_ioremap_resource_byname().
The stm32 remoteproc driver's PM operations are updated to modern
macros, to avoid the "unused variable"-warning in some configurations.
Drivers are transitioned away from directly including of_device.h"
* tag 'rproc-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (23 commits)
remoteproc: pru: add support for configuring GPMUX based on client setup
remoteproc: stm32: fix incorrect optional pointers
remoteproc: imx_rproc: Switch iMX8MN/MP from SMCCC to MMIO
dt-bindings: remoteproc: imx_rproc: Support i.MX8MN/P MMIO
dt-bindings: remoteproc: qcom,msm8996-mss-pil: Fix 8996 clocks
remoteproc: qcom: pas: add SDM845 SLPI compatible
remoteproc: qcom: q6v5-mss: Add support for SDM630/636/660
dt-bindings: remoteproc: qcom,msm8996-mss-pil: Add SDM660 compatible
remoteproc: qcom: Expand MD_* as MINIDUMP_*
remoteproc: qcom: pas: refactor SLPI remoteproc init
dt-bindings: remoteproc: qcom: adsp: add qcom,sdm845-slpi-pas compatible
remoteproc: qcom: wcnss: use devm_platform_ioremap_resource_byname()
remoteproc: qcom: q6v5: use devm_platform_ioremap_resource_byname()
dt-bindings: remoteproc: qcom: sm6115-pas: Add QCM2290
remoteproc: qcom: Add full coredump fallback mechanism
remoteproc: core: Export the rproc coredump APIs
remoteproc: qcom: Use of_reserved_mem_lookup()
remoteproc: imx_rproc: iterate all notifiyids in rx callback
dt-bindings: remoteproc: qcom,adsp: bring back firmware-name
dt-bindings: remoteproc: qcom,sm8550-pas: require memory-region
...
The GPMUX config value for a PRU device can now be configured by client
by specifying it in the device node ti,pruss-gp-mux-sel.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://lore.kernel.org/r/20230802064925.1895750-1-danishanwar@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Compile-testing without CONFIG_OF shows that the of_match_ptr() macro
was used incorrectly here:
drivers/remoteproc/stm32_rproc.c:662:34: warning: unused variable 'stm32_rproc_match' [-Wunused-const-variable]
As in almost every driver, the solution is simply to remove the
use of this macro. The same thing happened with the deprecated
SIMPLE_DEV_PM_OPS(), but the corresponding warning was already shut
up with __maybe_unused annotations, so fix those as well by using the
correct DEFINE_SIMPLE_DEV_PM_OPS() macros and removing the extraneous
__maybe_unused modifiers. For completeness, also add a pm_ptr() to let
the PM ops be eliminated completely when CONFIG_PM is turned off.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307242300.ia82qBTp-lkp@intel.com
Fixes: 03bd158e15 ("remoteproc: stm32: use correct format strings on 64-bit")
Fixes: 410119ee29 ("remoteproc: stm32: wakeup the system by wdg irq")
Fixes: 13140de09c ("remoteproc: stm32: add an ST stm32_rproc driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20230724195704.2432382-1-arnd@kernel.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
With qmp_send() handling variable length messages and string formatting
he callers of qmp_send() can be cleaned up to not care about these
things.
Drop the QMP_MSG_LEN sized buffers and use the message formatting, as
appropriate.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230811205839.727373-5-quic_bjorande@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The existing implementation of qmp_send() requires the caller to provide
a buffer which is of word-aligned. The underlying reason for this is
that message ram only supports word accesses, but pushing this
requirement onto the clients results in the same boiler plate code
sprinkled in every call site.
By using a temporary buffer in qmp_send() we can hide the underlying
hardware limitations from the clients and allow them to pass their
NUL-terminates C string directly.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811205839.727373-2-quic_bjorande@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The MX8M CM7 boot via SMC call is problematic, since not all versions
of ATF support this interface. Extend the MMIO support so it can boot
the CM7 on MX8MN/MP instead and discern the two alternatives using DT
compatible strings.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230724222418.163220-2-marex@denx.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Add a compatible for the SDM845 SLPI to the Qualcomm remoteproc q6v5_pas
driver. The SLPI is the same as in SM8150, SM8250, SM8350, and SM8450,
so use the same resource in the driver.
Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230330164633.117335-4-me@dylanvanassche.be
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Snapdragon 630/660 modem subsystem is similar to one in MSM8998
and can almost reuse it's reset sequence.
Downstream sources call this q6v5 version "qdsp6v62-1-5" and its
code path has additional checks for QDSP6v55_BHS_EN_REST_ACK
status [2].
Inspiration is taken from Konrad Dybcio's work in [1], but reworked
to use common code path with MSM8996/8998, instead of completely
separate "if" block for SDM660.
[1] 7dd6dd9b93
[2] https://github.com/MiCode/Xiaomi_Kernel_OpenSource/blob/lavender-q-oss/drivers/soc/qcom/pil-q6v5.c#L393
Co-developed-by: Konrad Dybcio <konradybcio@gmail.com>
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230621175046.61521-2-alexeymin@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
SLPI remoteproc initialization is the same for SDM845, SM8150, SM8250,
SM8350 but is duplicated for each compatible. Refactor initialization
structs for these 4 compatibles as a single struct.
Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230330164633.117335-3-me@dylanvanassche.be
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Convert platform_get_resource_byname(),devm_ioremap_resource() to a single
call to devm_platform_ioremap_resource_byname(), as this is exactly what
this function does.
Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202303221116427329010@zte.com.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Convert platform_get_resource_byname(),devm_ioremap_resource() to a single
call to devm_platform_ioremap_resource_byname(), as this is exactly what
this function does.
Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202303221115145068959@zte.com.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
If a remoteproc's firmware does not support minidump but the driver
adds an ID, the minidump driver does not collect any coredumps when
the remoteproc crashes. This hinders the purpose of coredump
collection. This change adds a fallback mechanism in the event of a
crash.
Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Signed-off-by: Gokul krishna Krishnakumar <quic_gokukris@quicinc.com>
Link: https://lore.kernel.org/r/20230224211707.30916-3-quic_gokukris@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The remoteproc coredump APIs are currently only part of the internal
remoteproc header. This prevents the remoteproc platform drivers from
using these APIs when needed. This change moves the rproc_coredump()
and rproc_coredump_cleanup() APIs to the linux header and marks them
as exported symbols.
Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Signed-off-by: Gokul krishna Krishnakumar <quic_gokukris@quicinc.com>
Link: https://lore.kernel.org/r/20230224211707.30916-2-quic_gokukris@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Reserved memory can be either looked up using the generic function
of_address_to_resource() or using the special of_reserved_mem_lookup().
The latter has the advantage that it ensures that the referenced memory
region was really reserved and is not e.g. status = "disabled".
of_reserved_mem also supports allocating reserved memory dynamically at
boot time. This works only when using of_reserved_mem_lookup() since
there won't be a fixed address in the device tree.
Switch the code to use of_reserved_mem_lookup(), similar to
qcom_q6v5_wcss.c which is using it already. There is no functional
difference for static reserved memory allocations.
While at it this also adds two missing of_node_put() calls in
qcom_q6v5_pas.c.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # SDM845
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20230710-rproc-of-rmem-v3-1-eea7f0a33590@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The current code only supports one vdev and a single callback,
but there are cases need more vdevs. So iterate all notifyids to
support more vdevs with the single callback.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230629093327.3376308-1-peng.fan@oss.nxp.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230714174935.4063513-1-robh@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The bulk of these patches relates to the moving to a void-returning
remove callback.
The i.MX HiFi remoteproc driver gets its pm_ops helpers updated to
resolve build warnings about "defined but not used" variables in certain
configurations.
The ST STM32 remoteproc driver is extended to allow using a SCMI reset
controller to hold boot, and has an error message corrected.
The Qualcomm Q6V5 PAS driver gains a missing "static" qualifier on
adsp_segment_dump().
-----BEGIN PGP SIGNATURE-----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=9t2a
-----END PGP SIGNATURE-----
Merge tag 'rproc-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"The bulk of these patches relates to the moving to a void-returning
remove callback.
The i.MX HiFi remoteproc driver gets its pm_ops helpers updated to
resolve build warnings about 'defined but not used' variables in
certain configurations.
The ST STM32 remoteproc driver is extended to allow using a SCMI reset
controller to hold boot, and has an error message corrected.
The Qualcomm Q6V5 PAS driver gains a missing 'static' qualifier on
adsp_segment_dump()"
* tag 'rproc-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (23 commits)
remoteproc: qcom_q6v5_pas: staticize adsp_segment_dump()
remoteproc: stm32: Fix error code in stm32_rproc_parse_dt()
remoteproc: stm32: Allow hold boot management by the SCMI reset controller
dt-bindings: remoteproc: st,stm32-rproc: Rework reset declarations
remoteproc: imx_dsp_rproc: use modern pm_ops
remoteproc: wkup_m3: Convert to platform remove callback returning void
remoteproc: stm32: Convert to platform remove callback returning void
remoteproc: st: Convert to platform remove callback returning void
remoteproc: virtio: Convert to platform remove callback returning void
remoteproc: rcar: Convert to platform remove callback returning void
remoteproc: qcom_wcnss: Convert to platform remove callback returning void
remoteproc: qcom_q6v5_wcss: Convert to platform remove callback returning void
remoteproc: qcom_q6v5_pas: Convert to platform remove callback returning void
remoteproc: qcom_q6v5_mss: Convert to platform remove callback returning void
remoteproc: qcom_q6v5_adsp: Convert to platform remove callback returning void
remoteproc: pru: Convert to platform remove callback returning void
remoteproc: omap: Convert to platform remove callback returning void
remoteproc: mtk_scp: Convert to platform remove callback returning void
remoteproc: meson_mx_ao_arc: Convert to platform remove callback returning void
remoteproc: keystone: Convert to platform remove callback returning void
...
Nothing surprising in the SoC specific drivers, with the usual updates:
* Added or improved SoC driver support for Tegra234, Exynos4121, RK3588,
as well as multiple Mediatek and Qualcomm chips
* SCMI firmware gains support for multiple SMC/HVC transport and version
3.2 of the protocol
* Cleanups amd minor changes for the reset controller, memory controller,
firmware and sram drivers
* Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
amlogic and renesas SoC specific drivers
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSdmbIACgkQYKtH/8kJ
UicewQ/6Aq8j5pBFYBimZoyQ0bi9z+prGrHoDDYLew2vKjtOXJl5z7ZnM3J1oyPt
Zvis3IaGkHJCuuqotPdsquZrzHq8slzXzwkHPfHORJBC4gV0V/vMS8w32tO5FfTq
ULrMyWnbsU7Udeywc2xuEpAoC9+bXX9brnCpa3H41peIGZKM+0g7EE6FASt3YaOk
O+ZMSGqF8QbCqSQrUH3GudFlFMy/VxIvwuUsbLt8aNkRACunQZXVgUdArvLV49nX
SElFN7hOVRoVDv0rgYMxlwElymrta/kMyjLba8GU1GIhzyDGozVqIJQAnsQ3f6CC
yyzaJm27zzJH0mx9jx4W+JLBdjqDL4ctE2WyllRVIpTGYMHiMQtutHNwtNupIuD5
j9j/fIVQWZqOdWXnA6V/CHYN1MZBRTH3KQcnLlYPC01dWKThPDnrHGfwOkfsrwtN
zuERJJ+gd5b8KW4dmy1ueDOSB8162LxbS7iHxpOBGySmqVOYj3XUqACZhKRfXfIQ
BVj9punCE/gO2fMb9IZByjeOzgtV+PBRmPxoglyaGkT4fVfL06kEbpKFYbXXq9b/
aAS/U84gGr8ebWsOXszwDnBzTZRzjMVv/T9KDTTJuWbBEPNyCR7fUG0cZ50rSKnJ
2cTPe3a0sS6LaBt71qfExCIfxG+cJ2c3N1U5/jb2C49Aob45obs=
=zvLr
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Nothing surprising in the SoC specific drivers, with the usual
updates:
- Added or improved SoC driver support for Tegra234, Exynos4121,
RK3588, as well as multiple Mediatek and Qualcomm chips
- SCMI firmware gains support for multiple SMC/HVC transport and
version 3.2 of the protocol
- Cleanups amd minor changes for the reset controller, memory
controller, firmware and sram drivers
- Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
amlogic and renesas SoC specific drivers"
* tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (118 commits)
dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding
MAINTAINERS: add PHY-related files to Amlogic SoC file list
drivers: meson: secure-pwrc: always enable DMA domain
tee: optee: Use kmemdup() to replace kmalloc + memcpy
soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer
dt-bindings: sram: qcom,imem: document qdu1000
soc: qcom: icc-bwmon: Fix MSM8998 count unit
dt-bindings: soc: qcom,rpmh-rsc: Require power-domains
soc: qcom: socinfo: Add Soc ID for IPQ5300
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300
soc: qcom: Fix a IS_ERR() vs NULL bug in probe
soc: qcom: socinfo: Add support for new fields in revision 19
soc: qcom: socinfo: Add support for new fields in revision 18
dt-bindings: firmware: scm: Add compatible for SDX75
soc: qcom: mdt_loader: Fix split image detection
dt-bindings: memory-controllers: drop unneeded quotes
soc: rockchip: dtpm: use C99 array init syntax
firmware: tegra: bpmp: Add support for DRAM MRQ GSCs
soc/tegra: pmc: Use devm_clk_notifier_register()
soc/tegra: pmc: Simplify debugfs initialization
...
With CONFIG_ARCH_STM32 making it into arch/arm64, a couple of format
strings no longer work, since they rely on size_t being compatible
with %x, or they print an 'int' using %z:
drivers/remoteproc/stm32_rproc.c: In function 'stm32_rproc_mem_alloc':
drivers/remoteproc/stm32_rproc.c:122:22: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'size_t' {aka 'long unsigned int'} [-Werror=format=]
drivers/remoteproc/stm32_rproc.c:122:40: note: format string is defined here
122 | dev_dbg(dev, "map memory: %pa+%x\n", &mem->dma, mem->len);
| ~^
| |
| unsigned int
| %lx
drivers/remoteproc/stm32_rproc.c:125:30: error: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'size_t' {aka 'long unsigned int'} [-Werror=format=]
drivers/remoteproc/stm32_rproc.c:125:65: note: format string is defined here
125 | dev_err(dev, "Unable to map memory region: %pa+%x\n",
| ~^
| |
| unsigned int
| %lx
drivers/remoteproc/stm32_rproc.c: In function 'stm32_rproc_get_loaded_rsc_table':
drivers/remoteproc/stm32_rproc.c:646:30: error: format '%zx' expects argument of type 'size_t', but argument 4 has type 'int' [-Werror=format=]
drivers/remoteproc/stm32_rproc.c:646:66: note: format string is defined here
646 | dev_err(dev, "Unable to map memory region: %pa+%zx\n",
| ~~^
| |
| long unsigned int
| %x
Fix up all three instances to work across architectures, and enable
compile testing for this driver to ensure it builds everywhere.
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
adsp_segment_dump() is not used outside of this unit, so add missing
static to fix:
drivers/remoteproc/qcom_q6v5_pas.c:108:6: warning: no previous prototype for ‘adsp_segment_dump’ [-Wmissing-prototypes]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230507144826.193067-1-krzysztof.kozlowski@linaro.org
There is a cut and paste bug so this code was returning the wrong
variable. It should have been "ddata->hold_boot_rst" instead of
"ddata->rst".
Fixes: de598695a2 ("remoteproc: stm32: Allow hold boot management by the SCMI reset controller")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/6f457246-6446-42cb-81ae-d37221d726b1@kili.mountain
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The PRUSS CFG module is represented as a syscon node and is currently
managed by the PRUSS platform driver. Add easy accessor functions to set
GPI mode, MII_RT event enable/disable and XFR (XIN XOUT) enable/disable
to enable the PRUSS Ethernet usecase. These functions reuse the generic
pruss_cfg_update() API function.
Signed-off-by: Suman Anna <s-anna@ti.com>
Co-developed-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: Puranjay Mohan <p-mohan@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://lore.kernel.org/r/20230414045542.3249939-5-danishanwar@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The hold boot can be managed by the SCMI controller as a reset.
If the "hold_boot" reset is defined in the device tree, use it.
Else use the syscon controller directly to access to the register.
The support of the SMC call is deprecated but kept for legacy support.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20230512093926.661509-3-arnaud.pouliquen@foss.st.com
Without CONFIG_PM, the driver warns about unused functions:
drivers/remoteproc/imx_dsp_rproc.c:1210:12: error: 'imx_dsp_runtime_suspend' defined but not used [-Werror=unused-function]
1210 | static int imx_dsp_runtime_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~
drivers/remoteproc/imx_dsp_rproc.c:1178:12: error: 'imx_dsp_runtime_resume' defined but not used [-Werror=unused-function]
1178 | static int imx_dsp_runtime_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~
Change the old SET_SYSTEM_SLEEP_PM_OPS()/SET_RUNTIME_PM_OPS()
helpers to their modern replacements that avoid the warning,
and remove the now unnecessary __maybe_unused annotations
on the other PM helper functions.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://lore.kernel.org/r/20230420213610.2219080-1-arnd@kernel.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230504194453.1150368-19-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20230504194453.1150368-18-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20230504194453.1150368-17-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230504194453.1150368-16-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230504194453.1150368-15-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20230504194453.1150368-14-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20230504194453.1150368-13-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20230504194453.1150368-12-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20230504194453.1150368-11-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20230504194453.1150368-10-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230504194453.1150368-9-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230504194453.1150368-8-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20230504194453.1150368-7-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20230504194453.1150368-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230504194453.1150368-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://lore.kernel.org/r/20230504194453.1150368-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://lore.kernel.org/r/20230504194453.1150368-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230504194453.1150368-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
- updates to scripts/gdb from Glenn Washburn
- kexec cleanups from Bjorn Helgaas
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZEr+6wAKCRDdBJ7gKXxA
jn4NAP4u/hj/kR2dxYehcVLuQqJspCRZZBZlAReFJyHNQO6voAEAk0NN9rtG2+/E
r0G29CJhK+YL0W6mOs8O1yo9J1rZnAM=
=2CUV
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2023-04-27-16-01' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Mainly singleton patches all over the place.
Series of note are:
- updates to scripts/gdb from Glenn Washburn
- kexec cleanups from Bjorn Helgaas"
* tag 'mm-nonmm-stable-2023-04-27-16-01' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (50 commits)
mailmap: add entries for Paul Mackerras
libgcc: add forward declarations for generic library routines
mailmap: add entry for Oleksandr
ocfs2: reduce ioctl stack usage
fs/proc: add Kthread flag to /proc/$pid/status
ia64: fix an addr to taddr in huge_pte_offset()
checkpatch: introduce proper bindings license check
epoll: rename global epmutex
scripts/gdb: add GDB convenience functions $lx_dentry_name() and $lx_i_dentry()
scripts/gdb: create linux/vfs.py for VFS related GDB helpers
uapi/linux/const.h: prefer ISO-friendly __typeof__
delayacct: track delays from IRQ/SOFTIRQ
scripts/gdb: timerlist: convert int chunks to str
scripts/gdb: print interrupts
scripts/gdb: raise error with reduced debugging information
scripts/gdb: add a Radix Tree Parser
lib/rbtree: use '+' instead of '|' for setting color.
proc/stat: remove arch_idle_time()
checkpatch: check for misuse of the link tags
checkpatch: allow Closes tags with links
...
The summary of the changes for this pull requests is:
* Song Liu's new struct module_memory replacement
* Nick Alcock's MODULE_LICENSE() removal for non-modules
* My cleanups and enhancements to reduce the areas where we vmalloc
module memory for duplicates, and the respective debug code which
proves the remaining vmalloc pressure comes from userspace.
Most of the changes have been in linux-next for quite some time except
the minor fixes I made to check if a module was already loaded
prior to allocating the final module memory with vmalloc and the
respective debug code it introduces to help clarify the issue. Although
the functional change is small it is rather safe as it can only *help*
reduce vmalloc space for duplicates and is confirmed to fix a bootup
issue with over 400 CPUs with KASAN enabled. I don't expect stable
kernels to pick up that fix as the cleanups would have also had to have
been picked up. Folks on larger CPU systems with modules will want to
just upgrade if vmalloc space has been an issue on bootup.
Given the size of this request, here's some more elaborate details
on this pull request.
The functional change change in this pull request is the very first
patch from Song Liu which replaces the struct module_layout with a new
struct module memory. The old data structure tried to put together all
types of supported module memory types in one data structure, the new
one abstracts the differences in memory types in a module to allow each
one to provide their own set of details. This paves the way in the
future so we can deal with them in a cleaner way. If you look at changes
they also provide a nice cleanup of how we handle these different memory
areas in a module. This change has been in linux-next since before the
merge window opened for v6.3 so to provide more than a full kernel cycle
of testing. It's a good thing as quite a bit of fixes have been found
for it.
Jason Baron then made dynamic debug a first class citizen module user by
using module notifier callbacks to allocate / remove module specific
dynamic debug information.
Nick Alcock has done quite a bit of work cross-tree to remove module
license tags from things which cannot possibly be module at my request
so to:
a) help him with his longer term tooling goals which require a
deterministic evaluation if a piece a symbol code could ever be
part of a module or not. But quite recently it is has been made
clear that tooling is not the only one that would benefit.
Disambiguating symbols also helps efforts such as live patching,
kprobes and BPF, but for other reasons and R&D on this area
is active with no clear solution in sight.
b) help us inch closer to the now generally accepted long term goal
of automating all the MODULE_LICENSE() tags from SPDX license tags
In so far as a) is concerned, although module license tags are a no-op
for non-modules, tools which would want create a mapping of possible
modules can only rely on the module license tag after the commit
8b41fc4454 ("kbuild: create modules.builtin without Makefile.modbuiltin
or tristate.conf"). Nick has been working on this *for years* and
AFAICT I was the only one to suggest two alternatives to this approach
for tooling. The complexity in one of my suggested approaches lies in
that we'd need a possible-obj-m and a could-be-module which would check
if the object being built is part of any kconfig build which could ever
lead to it being part of a module, and if so define a new define
-DPOSSIBLE_MODULE [0]. A more obvious yet theoretical approach I've
suggested would be to have a tristate in kconfig imply the same new
-DPOSSIBLE_MODULE as well but that means getting kconfig symbol names
mapping to modules always, and I don't think that's the case today. I am
not aware of Nick or anyone exploring either of these options. Quite
recently Josh Poimboeuf has pointed out that live patching, kprobes and
BPF would benefit from resolving some part of the disambiguation as
well but for other reasons. The function granularity KASLR (fgkaslr)
patches were mentioned but Joe Lawrence has clarified this effort has
been dropped with no clear solution in sight [1].
In the meantime removing module license tags from code which could never
be modules is welcomed for both objectives mentioned above. Some
developers have also welcomed these changes as it has helped clarify
when a module was never possible and they forgot to clean this up,
and so you'll see quite a bit of Nick's patches in other pull
requests for this merge window. I just picked up the stragglers after
rc3. LWN has good coverage on the motivation behind this work [2] and
the typical cross-tree issues he ran into along the way. The only
concrete blocker issue he ran into was that we should not remove the
MODULE_LICENSE() tags from files which have no SPDX tags yet, even if
they can never be modules. Nick ended up giving up on his efforts due
to having to do this vetting and backlash he ran into from folks who
really did *not understand* the core of the issue nor were providing
any alternative / guidance. I've gone through his changes and dropped
the patches which dropped the module license tags where an SPDX
license tag was missing, it only consisted of 11 drivers. To see
if a pull request deals with a file which lacks SPDX tags you
can just use:
./scripts/spdxcheck.py -f \
$(git diff --name-only commid-id | xargs echo)
You'll see a core module file in this pull request for the above,
but that's not related to his changes. WE just need to add the SPDX
license tag for the kernel/module/kmod.c file in the future but
it demonstrates the effectiveness of the script.
Most of Nick's changes were spread out through different trees,
and I just picked up the slack after rc3 for the last kernel was out.
Those changes have been in linux-next for over two weeks.
The cleanups, debug code I added and final fix I added for modules
were motivated by David Hildenbrand's report of boot failing on
a systems with over 400 CPUs when KASAN was enabled due to running
out of virtual memory space. Although the functional change only
consists of 3 lines in the patch "module: avoid allocation if module is
already present and ready", proving that this was the best we can
do on the modules side took quite a bit of effort and new debug code.
The initial cleanups I did on the modules side of things has been
in linux-next since around rc3 of the last kernel, the actual final
fix for and debug code however have only been in linux-next for about a
week or so but I think it is worth getting that code in for this merge
window as it does help fix / prove / evaluate the issues reported
with larger number of CPUs. Userspace is not yet fixed as it is taking
a bit of time for folks to understand the crux of the issue and find a
proper resolution. Worst come to worst, I have a kludge-of-concept [3]
of how to make kernel_read*() calls for modules unique / converge them,
but I'm currently inclined to just see if userspace can fix this
instead.
[0] https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/
[1] https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com
[2] https://lwn.net/Articles/927569/
[3] https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org
-----BEGIN PGP SIGNATURE-----
iQJGBAABCgAwFiEENnNq2KuOejlQLZofziMdCjCSiKcFAmRG4m0SHG1jZ3JvZkBr
ZXJuZWwub3JnAAoJEM4jHQowkoinQ2oP/0xlvKwJg6Ey8fHZF0qv8VOskE80zoLF
hMazU3xfqLA+1TQvouW1YBxt3jwS3t1Ehs+NrV+nY9Yzcm0MzRX/n3fASJVe7nRr
oqWWQU+voYl5Pw1xsfdp6C8IXpBQorpYby3Vp0MAMoZyl2W2YrNo36NV488wM9KC
jD4HF5Z6xpnPSZTRR7AgW9mo7FdAtxPeKJ76Bch7lH8U6omT7n36WqTw+5B1eAYU
YTOvrjRs294oqmWE+LeebyiOOXhH/yEYx4JNQgCwPdxwnRiGJWKsk5va0hRApqF/
WW8dIqdEnjsa84lCuxnmWgbcPK8cgmlO0rT0DyneACCldNlldCW1LJ0HOwLk9pea
p3JFAsBL7TKue4Tos6I7/4rx1ufyBGGIigqw9/VX5g0Iif+3BhWnqKRfz+p9wiMa
Fl7cU6u7yC68CHu1HBSisK16cYMCPeOnTSd89upHj8JU/t74O6k/ARvjrQ9qmNUt
c5U+OY+WpNJ1nXQydhY/yIDhFdYg8SSpNuIO90r4L8/8jRQYXNG80FDd1UtvVDuy
eq0r2yZ8C0XHSlOT9QHaua/tWV/aaKtyC/c0hDRrigfUrq8UOlGujMXbUnrmrWJI
tLJLAc7ePWAAoZXGSHrt0U27l029GzLwRdKqJ6kkDANVnTeOdV+mmBg9zGh3/Mp6
agiwdHUMVN7X
=56WK
-----END PGP SIGNATURE-----
Merge tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module updates from Luis Chamberlain:
"The summary of the changes for this pull requests is:
- Song Liu's new struct module_memory replacement
- Nick Alcock's MODULE_LICENSE() removal for non-modules
- My cleanups and enhancements to reduce the areas where we vmalloc
module memory for duplicates, and the respective debug code which
proves the remaining vmalloc pressure comes from userspace.
Most of the changes have been in linux-next for quite some time except
the minor fixes I made to check if a module was already loaded prior
to allocating the final module memory with vmalloc and the respective
debug code it introduces to help clarify the issue. Although the
functional change is small it is rather safe as it can only *help*
reduce vmalloc space for duplicates and is confirmed to fix a bootup
issue with over 400 CPUs with KASAN enabled. I don't expect stable
kernels to pick up that fix as the cleanups would have also had to
have been picked up. Folks on larger CPU systems with modules will
want to just upgrade if vmalloc space has been an issue on bootup.
Given the size of this request, here's some more elaborate details:
The functional change change in this pull request is the very first
patch from Song Liu which replaces the 'struct module_layout' with a
new 'struct module_memory'. The old data structure tried to put
together all types of supported module memory types in one data
structure, the new one abstracts the differences in memory types in a
module to allow each one to provide their own set of details. This
paves the way in the future so we can deal with them in a cleaner way.
If you look at changes they also provide a nice cleanup of how we
handle these different memory areas in a module. This change has been
in linux-next since before the merge window opened for v6.3 so to
provide more than a full kernel cycle of testing. It's a good thing as
quite a bit of fixes have been found for it.
Jason Baron then made dynamic debug a first class citizen module user
by using module notifier callbacks to allocate / remove module
specific dynamic debug information.
Nick Alcock has done quite a bit of work cross-tree to remove module
license tags from things which cannot possibly be module at my request
so to:
a) help him with his longer term tooling goals which require a
deterministic evaluation if a piece a symbol code could ever be
part of a module or not. But quite recently it is has been made
clear that tooling is not the only one that would benefit.
Disambiguating symbols also helps efforts such as live patching,
kprobes and BPF, but for other reasons and R&D on this area is
active with no clear solution in sight.
b) help us inch closer to the now generally accepted long term goal
of automating all the MODULE_LICENSE() tags from SPDX license tags
In so far as a) is concerned, although module license tags are a no-op
for non-modules, tools which would want create a mapping of possible
modules can only rely on the module license tag after the commit
8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf").
Nick has been working on this *for years* and AFAICT I was the only
one to suggest two alternatives to this approach for tooling. The
complexity in one of my suggested approaches lies in that we'd need a
possible-obj-m and a could-be-module which would check if the object
being built is part of any kconfig build which could ever lead to it
being part of a module, and if so define a new define
-DPOSSIBLE_MODULE [0].
A more obvious yet theoretical approach I've suggested would be to
have a tristate in kconfig imply the same new -DPOSSIBLE_MODULE as
well but that means getting kconfig symbol names mapping to modules
always, and I don't think that's the case today. I am not aware of
Nick or anyone exploring either of these options. Quite recently Josh
Poimboeuf has pointed out that live patching, kprobes and BPF would
benefit from resolving some part of the disambiguation as well but for
other reasons. The function granularity KASLR (fgkaslr) patches were
mentioned but Joe Lawrence has clarified this effort has been dropped
with no clear solution in sight [1].
In the meantime removing module license tags from code which could
never be modules is welcomed for both objectives mentioned above. Some
developers have also welcomed these changes as it has helped clarify
when a module was never possible and they forgot to clean this up, and
so you'll see quite a bit of Nick's patches in other pull requests for
this merge window. I just picked up the stragglers after rc3. LWN has
good coverage on the motivation behind this work [2] and the typical
cross-tree issues he ran into along the way. The only concrete blocker
issue he ran into was that we should not remove the MODULE_LICENSE()
tags from files which have no SPDX tags yet, even if they can never be
modules. Nick ended up giving up on his efforts due to having to do
this vetting and backlash he ran into from folks who really did *not
understand* the core of the issue nor were providing any alternative /
guidance. I've gone through his changes and dropped the patches which
dropped the module license tags where an SPDX license tag was missing,
it only consisted of 11 drivers. To see if a pull request deals with a
file which lacks SPDX tags you can just use:
./scripts/spdxcheck.py -f \
$(git diff --name-only commid-id | xargs echo)
You'll see a core module file in this pull request for the above, but
that's not related to his changes. WE just need to add the SPDX
license tag for the kernel/module/kmod.c file in the future but it
demonstrates the effectiveness of the script.
Most of Nick's changes were spread out through different trees, and I
just picked up the slack after rc3 for the last kernel was out. Those
changes have been in linux-next for over two weeks.
The cleanups, debug code I added and final fix I added for modules
were motivated by David Hildenbrand's report of boot failing on a
systems with over 400 CPUs when KASAN was enabled due to running out
of virtual memory space. Although the functional change only consists
of 3 lines in the patch "module: avoid allocation if module is already
present and ready", proving that this was the best we can do on the
modules side took quite a bit of effort and new debug code.
The initial cleanups I did on the modules side of things has been in
linux-next since around rc3 of the last kernel, the actual final fix
for and debug code however have only been in linux-next for about a
week or so but I think it is worth getting that code in for this merge
window as it does help fix / prove / evaluate the issues reported with
larger number of CPUs. Userspace is not yet fixed as it is taking a
bit of time for folks to understand the crux of the issue and find a
proper resolution. Worst come to worst, I have a kludge-of-concept [3]
of how to make kernel_read*() calls for modules unique / converge
them, but I'm currently inclined to just see if userspace can fix this
instead"
Link: https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/ [0]
Link: https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com [1]
Link: https://lwn.net/Articles/927569/ [2]
Link: https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org [3]
* tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (121 commits)
module: add debugging auto-load duplicate module support
module: stats: fix invalid_mod_bytes typo
module: remove use of uninitialized variable len
module: fix building stats for 32-bit targets
module: stats: include uapi/linux/module.h
module: avoid allocation if module is already present and ready
module: add debug stats to help identify memory pressure
module: extract patient module check into helper
modules/kmod: replace implementation with a semaphore
Change DEFINE_SEMAPHORE() to take a number argument
module: fix kmemleak annotations for non init ELF sections
module: Ignore L0 and rename is_arm_mapping_symbol()
module: Move is_arm_mapping_symbol() to module_symbol.h
module: Sync code of is_arm_mapping_symbol()
scripts/gdb: use mem instead of core_layout to get the module address
interconnect: remove module-related code
interconnect: remove MODULE_LICENSE in non-modules
zswap: remove MODULE_LICENSE in non-modules
zpool: remove MODULE_LICENSE in non-modules
x86/mm/dump_pagetables: remove MODULE_LICENSE in non-modules
...
Unnecessary type casts from the void * rproc->priv pointer is dropped
throughout te subsystem.
A kernel-doc error is corrected in the Mediatek SCPI IPI implementation.
The firmware loading onto the IMX DSP remote processors is reworked to
avoid non-32bit memory operations. A module parameter is introduced to
assist development of firmware without communication abilities in place.
Error paths in imx_dsp_rproc_mbox_alloc() is cleaned up.
The cluster configuration handling in the TI K3 R5 driver is corrected
and support for the single-R5 core found in the TI AM62x SoC family is
introduced.
The TI PRU driver device- to virtual-address translation is updated to
avoid compiler warning about the unsigned device-address always being
larger than 0.
The ST remoteproc driver is transitioned to use of_property_present().
Issues with kicks arriving after the STM32 remote processor has been
shut down are mitigated by checking the processor's state before
handling them.
Support for mailbox channels for communication with the remote
processors are added to the Xilinx R5 remoteproc driver. The naming of
carveouts are corrected and their parsing is reworked.
For this a couple of fixes targeting the mailbox subsystem are picked up
here as well.
Reference counting of of_nodes are corrected in the ST, STM32, RCAR and
IMX remoteproc drivers.
-----BEGIN PGP SIGNATURE-----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=HEds
-----END PGP SIGNATURE-----
Merge tag 'rproc-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- Unnecessary type casts from the 'void *' rproc->priv pointer are
dropped throughout the subsystem.
- A kernel-doc error is corrected in the Mediatek SCPI IPI
implementation
- The firmware loading onto the IMX DSP remote processors is reworked
to avoid non-32bit memory operations. A module parameter is
introduced to assist development of firmware without communication
abilities in place. Error paths in imx_dsp_rproc_mbox_alloc() is
cleaned up
- The cluster configuration handling in the TI K3 R5 driver is
corrected and support for the single-R5 core found in the TI AM62x
SoC family is introduced
- The TI PRU driver device- to virtual-address translation is updated
to avoid compiler warning about the unsigned device-address always
being larger than 0
- The ST remoteproc driver is transitioned to use of_property_present()
- Issues with kicks arriving after the STM32 remote processor has been
shut down are mitigated by checking the processor's state before
handling them.
- Support for mailbox channels for communication with the remote
processors are added to the Xilinx R5 remoteproc driver. The naming
of carveouts are corrected and their parsing is reworked. For this a
couple of fixes targeting the mailbox subsystem are picked up here as
well.
- Reference counting of of_nodes are corrected in the ST, STM32, RCAR
and IMX remoteproc drivers
* tag 'rproc-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (24 commits)
remoteproc: st: Use of_property_present() for testing DT property presence
dt-bindings: remoteproc: Drop unneeded quotes
remoteproc: imx_dsp_rproc: Fix kernel test robot sparse warning
remoteproc: imx_dsp_rproc: Improve exception handling in imx_dsp_rproc_mbox_alloc()
remoteproc: pru: Remove always true check positive unsigned value
dt-bindings: remoteproc: stm32-rproc: Typo fix
remoteproc: stm32_rproc: Add mutex protection for workqueue
remoteproc: Remove unnecessary (void*) conversions
remoteproc: imx_dsp_rproc: Call of_node_put() on iteration error
remoteproc: imx_rproc: Call of_node_put() on iteration error
remoteproc: rcar_rproc: Call of_node_put() on iteration error
remoteproc: st: Call of_node_put() on iteration error
remoteproc: stm32: Call of_node_put() on iteration error
remoteproc: k3-r5: Use separate compatible string for TI AM62x SoC family
dt-bindings: remoteproc: ti: Add new compatible for AM62 SoC family
remoteproc: k3-r5: Simplify cluster mode setting usage
remoteproc/mtk_scpi_ipi: Fix one kernel-doc comment
remoteproc: xilinx: Add mailbox channels for rpmsg
drivers: remoteproc: xilinx: Fix carveout names
mailbox: zynqmp: Fix typo in IPI documentation
...
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230310144736.1546972-1-robh@kernel.org
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Mukesh Ojha <quic_mojha@quicinc.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: linux-remoteproc@vger.kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
The label “err_out” was used to jump to another pointer check
despite of the detail in the implementation of the function
“imx_dsp_rproc_mbox_alloc” that it was determined already
that the corresponding variable contained an error pointer
because of a failed call of the function “mbox_request_channel_byname”.
Thus perform the following adjustments:
1. Return directly after a call of the function
“mbox_request_channel_byname” failed for the input parameter “tx”.
2. Use more appropriate labels instead.
3. Reorder jump targets at the end.
4. Omit a function call and three extra checks.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://lore.kernel.org/r/d0e18bb1-afc4-8b6f-bb1c-b74b3bad908e@web.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
