John Garry <john.g.garry@oracle.com> says:
This series tidies-up libsas a bit, including:
- delete structure(s) with only one member
- delete structure members which are only ever set
- delete structure members which are never set and code which relies on
that member being set
This conflicts with the following series:
https://lore.kernel.org/linux-scsi/20230809132249.37948-1-yuehaibing@huawei.com/
Any conflict should be trivial to resolve.
Based on mkp-scsi staging at a18e81d17a ("scsi: ufs: ufs-pci: Add support for QEMU")
Link: https://lore.kernel.org/r/20230815115156.343535-1-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since libsas was introduced in commit 2908d778ab ("[SCSI] aic94xx: new
driver"), sas_ssp_task.task_prio is never set, so delete it and any
references which depend on it being set (all of them).
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230815115156.343535-8-john.g.garry@oracle.com
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since commit 79855d1785 ("libsas: remove task_collector mode"), struct
scsi_core only contains a reference to the shost. struct scsi_core is only
used in sas_ha_struct.core, so delete scsi_core and replace with a
reference to the shost there.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230815115156.343535-5-john.g.garry@oracle.com
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
enum sas_phy_type is used for asd_sas_phy.type, which is only ever set, so
delete this member and the enum.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230815115156.343535-4-john.g.garry@oracle.com
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
enum sas_class prob would have been useful if function sas_show_class() was
ever implemented, which it wasn't.
enum sas_class is used as asd_sas_port.class and asd_sas_phy.class, which
are only ever set, so delete these members and the enum.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230815115156.343535-3-john.g.garry@oracle.com
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since libsas was introduced in commit 2908d778ab ("[SCSI] aic94xx: new
driver"), sas_ha_struct.lldd_module has only ever been set, so remove it.
Struct scsi_host_template already has a reference to the LLD driver
module as to stop the driver being removed unexpectedly.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230815115156.343535-2-john.g.garry@oracle.com
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
To properly manage possible failure of sas_register_ha() in
isci_register_sas_ha(), return its result instead of zero
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Link: https://lore.kernel.org/r/20230813202336.240874-1-artem.chernyshev@red-soft.ru
Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This callback is never called, so remove support.
Link: https://lore.kernel.org/r/1645112566-115804-4-git-send-email-john.garry@huawei.com
Tested-by: Yihang Li <liyihang6@hisilicon.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
As defined in table 126 of the SAS spec 1.1, use an enum for the DATAPRES
field, which makes reading the code easier.
Also change sas_ssp_task_response() to use a switch statement, which is
more suitable (than if-else), as suggested by Christoph.
Link: https://lore.kernel.org/r/1645112566-115804-3-git-send-email-john.garry@huawei.com
Suggested-by: Xiang Chen <chenxiang66@hisilicon.com>
Tested-by: Yihang Li <liyihang6@hisilicon.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In the queue path, move around when we assign sas_task->lldd_task such that
this pointer and the SAS_TASK_AT_INITIATOR flag are set atomically. It is
also not required to clear SAS_TASK_AT_INITIATOR in isci_task_execute_task()
error path as it is also cleared immediately after in isci_task_refuse()
call.
Now the following items may be considered:
- SAS_TASK_STATE_DONE and SAS_TASK_AT_INITIATOR are mutually exclusive
apart from possibly when SAS_TASK_STATE_DONE is set in
sas_scsi_find_task(), but that is after .lldd_abort_task, i.e. the
considered callback, is called.
- If isci_task_refuse() is called in the queue path, then
sas_task->lldd_task and SAS_TASK_AT_INITIATOR are cleared atomically in
isci_task_refuse().
- In the completion path, SAS_TASK_STATE_DONE is set and
SAS_TASK_AT_INITIATOR is cleared atomically before the
sas_task.lldd_task is cleared later.
So in isci_task_abort_task() if SAS_TASK_STATE_DONE is not set and
sas_task.lldd_task is still set, then SAS_TASK_AT_INITIATOR must be set -
so we can drop this check on SAS_TASK_AT_INITIATOR.
[mkp: checkpatch]
Link: https://lore.kernel.org/r/1644489804-85730-2-git-send-email-john.garry@huawei.com
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
struct device supports attribute groups directly but does not support
struct device_attribute directly. Hence switch to attribute groups.
Link: https://lore.kernel.org/r/20211012233558.4066756-27-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is no function with the name isci_queuecommand(). Hence remove the
declaration for isci_queuecommand().
Link: https://lore.kernel.org/r/20211007204618.2196847-12-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Offlining a SATA device connected to a hisi SAS controller and then
scanning the host will result in detecting 255 non-existent devices:
# lsscsi
[2:0:0:0] disk ATA Samsung SSD 860 2B6Q /dev/sda
[2:0:1:0] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdb
[2:0:2:0] disk SEAGATE ST600MM0006 B001 /dev/sdc
# echo "offline" > /sys/block/sdb/device/state
# echo "- - -" > /sys/class/scsi_host/host2/scan
# lsscsi
[2:0:0:0] disk ATA Samsung SSD 860 2B6Q /dev/sda
[2:0:1:0] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdb
[2:0:1:1] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdh
...
[2:0:1:255] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdjb
After a REPORT LUN command issued to the offline device fails, the SCSI
midlayer tries to do a sequential scan of all devices whose LUN number is
not 0. However, SATA does not support LUN numbers at all.
Introduce a generic sas_slave_alloc() handler which will return -ENXIO for
SATA devices if the requested LUN number is larger than 0 and make libsas
drivers use this function as their .slave_alloc callback.
Link: https://lore.kernel.org/r/20210622034037.1467088-1-yuyufen@huawei.com
Reported-by: Wu Bo <wubo40@huawei.com>
Suggested-by: John Garry <john.garry@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch prepares for converting SAM status codes into an enum. Without
this patch converting SAM status codes into an enumeration type would
trigger complaints about enum type mismatches for the SAS code.
Link: https://lore.kernel.org/r/20210524025457.11299-2-bvanassche@acm.org
Cc: Hannes Reinecke <hare@suse.com>
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Cc: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), avoid intentionally writing across
neighboring array fields.
Switch from rsp_ui to resp_buf, since resp_ui isn't SSP_RESP_IU_MAX_SIZE
bytes in length. This avoids future compile-time warnings.
Link: https://lore.kernel.org/r/20210528181337.792268-4-keescook@chromium.org
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
struct sci_phy_proto was already defined on line 142. The declaration here
is unnecessary. Remove it.
Link: https://lore.kernel.org/r/20210406105913.676746-1-wanjiabing@vivo.com
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/isci/remote_node_table.c:113: warning: Function parameter or member 'group_table_index' not described in 'sci_remote_node_table_clear_group_index'
drivers/scsi/isci/remote_node_table.c:113: warning: Excess function parameter 'set_index' description in 'sci_remote_node_table_clear_group_index'
drivers/scsi/isci/remote_node_table.c:262: warning: Function parameter or member 'group_index' not described in 'sci_remote_node_table_set_group'
drivers/scsi/isci/remote_node_table.c:383: warning: Function parameter or member 'group_table_index' not described in 'sci_remote_node_table_allocate_single_remote_node'
drivers/scsi/isci/remote_node_table.c:383: warning: Excess function parameter 'table_index' description in 'sci_remote_node_table_allocate_single_remote_node'
drivers/scsi/isci/remote_node_table.c:516: warning: Function parameter or member 'remote_node_index' not described in 'sci_remote_node_table_release_single_remote_node'
drivers/scsi/isci/remote_node_table.c:562: warning: Function parameter or member 'remote_node_index' not described in 'sci_remote_node_table_release_triple_remote_node'
drivers/scsi/isci/remote_node_table.c:588: warning: Function parameter or member 'remote_node_index' not described in 'sci_remote_node_table_release_remote_node_index'
Link: https://lore.kernel.org/r/20210317091230.2912389-31-lee.jones@linaro.org
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/isci/remote_node_context.c:206: warning: Function parameter or member 'rnc' not described in 'sci_remote_node_context_notify_user'
drivers/scsi/isci/remote_node_context.c:206: warning: expecting prototype for This method just calls the user callback function and then resets the(). Prototype was for sci_remote_node_context_notify_user() instead
Link: https://lore.kernel.org/r/20210317091230.2912389-30-lee.jones@linaro.org
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/isci/port.c:130: warning: Function parameter or member 'iport' not described in 'sci_port_get_properties'
drivers/scsi/isci/port.c:130: warning: Function parameter or member 'prop' not described in 'sci_port_get_properties'
drivers/scsi/isci/port.c:130: warning: Excess function parameter 'port' description in 'sci_port_get_properties'
drivers/scsi/isci/port.c:130: warning: Excess function parameter 'properties' description in 'sci_port_get_properties'
drivers/scsi/isci/port.c:243: warning: Function parameter or member 'isci_phy' not described in 'isci_port_link_down'
drivers/scsi/isci/port.c:243: warning: Function parameter or member 'isci_port' not described in 'isci_port_link_down'
drivers/scsi/isci/port.c:243: warning: Excess function parameter 'phy' description in 'isci_port_link_down'
drivers/scsi/isci/port.c:243: warning: Excess function parameter 'port' description in 'isci_port_link_down'
drivers/scsi/isci/port.c:318: warning: Function parameter or member 'isci_port' not described in 'isci_port_hard_reset_complete'
drivers/scsi/isci/port.c:318: warning: Excess function parameter 'port' description in 'isci_port_hard_reset_complete'
drivers/scsi/isci/port.c:398: warning: Cannot understand *
drivers/scsi/isci/port.c:544: warning: Function parameter or member 'iport' not described in 'sci_port_construct_dummy_rnc'
drivers/scsi/isci/port.c:544: warning: Excess function parameter 'sci_port' description in 'sci_port_construct_dummy_rnc'
drivers/scsi/isci/port.c:692: warning: Function parameter or member 'iport' not described in 'sci_port_general_link_up_handler'
drivers/scsi/isci/port.c:692: warning: Function parameter or member 'iphy' not described in 'sci_port_general_link_up_handler'
drivers/scsi/isci/port.c:692: warning: Excess function parameter 'sci_port' description in 'sci_port_general_link_up_handler'
drivers/scsi/isci/port.c:692: warning: Excess function parameter 'sci_phy' description in 'sci_port_general_link_up_handler'
drivers/scsi/isci/port.c:719: warning: wrong kernel-doc identifier on line:
drivers/scsi/isci/port.c:756: warning: Function parameter or member 'iport' not described in 'sci_port_link_detected'
drivers/scsi/isci/port.c:756: warning: Function parameter or member 'iphy' not described in 'sci_port_link_detected'
drivers/scsi/isci/port.c:756: warning: expecting prototype for if the(). Prototype was for sci_port_link_detected() instead
drivers/scsi/isci/port.c:821: warning: wrong kernel-doc identifier on line:
drivers/scsi/isci/port.c:885: warning: Function parameter or member 'iport' not described in 'sci_port_post_dummy_request'
drivers/scsi/isci/port.c:885: warning: Excess function parameter 'sci_port' description in 'sci_port_post_dummy_request'
drivers/scsi/isci/port.c:909: warning: Function parameter or member 'iport' not described in 'sci_port_abort_dummy_request'
drivers/scsi/isci/port.c:909: warning: expecting prototype for This will alow the hardware to(). Prototype was for sci_port_abort_dummy_request() instead
drivers/scsi/isci/port.c:926: warning: Cannot understand *
drivers/scsi/isci/port.c:1017: warning: Cannot understand *
drivers/scsi/isci/port.c:1199: warning: Function parameter or member 'iport' not described in 'sci_port_add_phy'
drivers/scsi/isci/port.c:1199: warning: Function parameter or member 'iphy' not described in 'sci_port_add_phy'
drivers/scsi/isci/port.c:1199: warning: Excess function parameter 'sci_port' description in 'sci_port_add_phy'
drivers/scsi/isci/port.c:1199: warning: Excess function parameter 'sci_phy' description in 'sci_port_add_phy'
drivers/scsi/isci/port.c:1270: warning: Function parameter or member 'iport' not described in 'sci_port_remove_phy'
drivers/scsi/isci/port.c:1270: warning: Function parameter or member 'iphy' not described in 'sci_port_remove_phy'
drivers/scsi/isci/port.c:1270: warning: Excess function parameter 'sci_port' description in 'sci_port_remove_phy'
drivers/scsi/isci/port.c:1270: warning: Excess function parameter 'sci_phy' description in 'sci_port_remove_phy'
[mkp: fixed typo alow->allow]
Link: https://lore.kernel.org/r/20210317091230.2912389-29-lee.jones@linaro.org
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/isci/request.c:496: warning: Function parameter or member 'ireq' not described in 'scu_sata_request_construct_task_context'
drivers/scsi/isci/request.c:496: warning: Excess function parameter 'sci_req' description in 'scu_sata_request_construct_task_context'
Link: https://lore.kernel.org/r/20210317091230.2912389-28-lee.jones@linaro.org
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/isci/remote_device.c:299: warning: Function parameter or member 'ihost' not described in 'isci_remote_device_not_ready'
drivers/scsi/isci/remote_device.c:299: warning: Function parameter or member 'idev' not described in 'isci_remote_device_not_ready'
drivers/scsi/isci/remote_device.c:299: warning: Function parameter or member 'reason' not described in 'isci_remote_device_not_ready'
drivers/scsi/isci/remote_device.c:299: warning: Excess function parameter 'isci_host' description in 'isci_remote_device_not_ready'
drivers/scsi/isci/remote_device.c:299: warning: Excess function parameter 'isci_device' description in 'isci_remote_device_not_ready'
drivers/scsi/isci/remote_device.c:1015: warning: Function parameter or member 'idev' not described in 'sci_remote_device_destruct'
drivers/scsi/isci/remote_device.c:1015: warning: Excess function parameter 'remote_device' description in 'sci_remote_device_destruct'
drivers/scsi/isci/remote_device.c:1249: warning: Function parameter or member 'iport' not described in 'sci_remote_device_construct'
drivers/scsi/isci/remote_device.c:1249: warning: Function parameter or member 'idev' not described in 'sci_remote_device_construct'
drivers/scsi/isci/remote_device.c:1249: warning: Excess function parameter 'sci_port' description in 'sci_remote_device_construct'
drivers/scsi/isci/remote_device.c:1249: warning: Excess function parameter 'sci_dev' description in 'sci_remote_device_construct'
drivers/scsi/isci/remote_device.c:1275: warning: Function parameter or member 'iport' not described in 'sci_remote_device_da_construct'
drivers/scsi/isci/remote_device.c:1275: warning: Function parameter or member 'idev' not described in 'sci_remote_device_da_construct'
drivers/scsi/isci/remote_device.c:1311: warning: Function parameter or member 'iport' not described in 'sci_remote_device_ea_construct'
drivers/scsi/isci/remote_device.c:1311: warning: Function parameter or member 'idev' not described in 'sci_remote_device_ea_construct'
drivers/scsi/isci/remote_device.c:1453: warning: Function parameter or member 'idev' not described in 'sci_remote_device_start'
drivers/scsi/isci/remote_device.c:1453: warning: Excess function parameter 'remote_device' description in 'sci_remote_device_start'
drivers/scsi/isci/remote_device.c:1513: warning: Function parameter or member 'ihost' not described in 'isci_remote_device_alloc'
drivers/scsi/isci/remote_device.c:1513: warning: Function parameter or member 'iport' not described in 'isci_remote_device_alloc'
drivers/scsi/isci/remote_device.c:1513: warning: expecting prototype for This function builds the isci_remote_device when a libsas dev_found message(). Prototype was for isci_remote_device_alloc() instead
drivers/scsi/isci/remote_device.c:1558: warning: Function parameter or member 'ihost' not described in 'isci_remote_device_stop'
drivers/scsi/isci/remote_device.c:1558: warning: Function parameter or member 'idev' not described in 'isci_remote_device_stop'
drivers/scsi/isci/remote_device.c:1558: warning: Excess function parameter 'isci_host' description in 'isci_remote_device_stop'
drivers/scsi/isci/remote_device.c:1558: warning: Excess function parameter 'isci_device' description in 'isci_remote_device_stop'
drivers/scsi/isci/remote_device.c:1592: warning: Function parameter or member 'dev' not described in 'isci_remote_device_gone'
drivers/scsi/isci/remote_device.c:1592: warning: Excess function parameter 'domain_device' description in 'isci_remote_device_gone'
drivers/scsi/isci/remote_device.c:1614: warning: Function parameter or member 'dev' not described in 'isci_remote_device_found'
drivers/scsi/isci/remote_device.c:1614: warning: Excess function parameter 'domain_device' description in 'isci_remote_device_found'
Link: https://lore.kernel.org/r/20210317091230.2912389-27-lee.jones@linaro.org
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/isci/port_config.c:76: warning: Cannot understand *
drivers/scsi/isci/port_config.c:105: warning: Cannot understand *
drivers/scsi/isci/port_config.c:148: warning: Cannot understand *
drivers/scsi/isci/port_config.c:376: warning: Cannot understand *
drivers/scsi/isci/port_config.c:607: warning: Function parameter or member 'ihost' not described in 'sci_apc_agent_link_up'
drivers/scsi/isci/port_config.c:607: warning: Function parameter or member 'port_agent' not described in 'sci_apc_agent_link_up'
drivers/scsi/isci/port_config.c:607: warning: Function parameter or member 'iport' not described in 'sci_apc_agent_link_up'
drivers/scsi/isci/port_config.c:607: warning: Function parameter or member 'iphy' not described in 'sci_apc_agent_link_up'
drivers/scsi/isci/port_config.c:607: warning: Excess function parameter 'scic' description in 'sci_apc_agent_link_up'
drivers/scsi/isci/port_config.c:607: warning: Excess function parameter 'sci_port' description in 'sci_apc_agent_link_up'
drivers/scsi/isci/port_config.c:607: warning: Excess function parameter 'sci_phy' description in 'sci_apc_agent_link_up'
drivers/scsi/isci/port_config.c:623: warning: Cannot understand *
drivers/scsi/isci/port_config.c:701: warning: Cannot understand *
Link: https://lore.kernel.org/r/20210317091230.2912389-26-lee.jones@linaro.org
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/isci/task.c:383: warning: Function parameter or member 'isci_host' not described in 'isci_task_send_lu_reset_sas'
drivers/scsi/isci/task.c:383: warning: Function parameter or member 'isci_device' not described in 'isci_task_send_lu_reset_sas'
drivers/scsi/isci/task.c:677: warning: Excess function parameter 'lun' description in 'isci_task_query_task'
Link: https://lore.kernel.org/r/20210317091230.2912389-23-lee.jones@linaro.org
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/isci/host.c:93: warning: Cannot understand *
drivers/scsi/isci/host.c:108: warning: Function parameter or member 'x' not described in 'NORMALIZE_PUT_POINTER'
drivers/scsi/isci/host.c:121: warning: Function parameter or member 'x' not described in 'NORMALIZE_EVENT_POINTER'
drivers/scsi/isci/host.c:130: warning: Function parameter or member 'x' not described in 'NORMALIZE_GET_POINTER'
drivers/scsi/isci/host.c:139: warning: Function parameter or member 'x' not described in 'NORMALIZE_GET_POINTER_CYCLE_BIT'
drivers/scsi/isci/host.c:146: warning: Function parameter or member 'x' not described in 'COMPLETION_QUEUE_CYCLE_BIT'
drivers/scsi/isci/host.c:646: warning: Function parameter or member 'ihost' not described in 'isci_host_start_complete'
drivers/scsi/isci/host.c:646: warning: Excess function parameter 'isci_host' description in 'isci_host_start_complete'
drivers/scsi/isci/host.c:680: warning: Function parameter or member 'ihost' not described in 'sci_controller_get_suggested_start_timeout'
drivers/scsi/isci/host.c:680: warning: Excess function parameter 'controller' description in 'sci_controller_get_suggested_start_timeout'
drivers/scsi/isci/host.c:903: warning: Function parameter or member 'ihost' not described in 'sci_controller_start_next_phy'
drivers/scsi/isci/host.c:903: warning: Excess function parameter 'scic' description in 'sci_controller_start_next_phy'
drivers/scsi/isci/host.c:1159: warning: Function parameter or member 'ihost' not described in 'sci_controller_stop'
drivers/scsi/isci/host.c:1159: warning: Excess function parameter 'controller' description in 'sci_controller_stop'
drivers/scsi/isci/host.c:1184: warning: Function parameter or member 'ihost' not described in 'sci_controller_reset'
drivers/scsi/isci/host.c:1184: warning: Excess function parameter 'controller' description in 'sci_controller_reset'
drivers/scsi/isci/host.c:1352: warning: Function parameter or member 'ihost' not described in 'sci_controller_set_interrupt_coalescence'
drivers/scsi/isci/host.c:1352: warning: Excess function parameter 'controller' description in 'sci_controller_set_interrupt_coalescence'
drivers/scsi/isci/host.c:2498: warning: Function parameter or member 'ihost' not described in 'sci_controller_allocate_remote_node_context'
drivers/scsi/isci/host.c:2498: warning: Function parameter or member 'idev' not described in 'sci_controller_allocate_remote_node_context'
drivers/scsi/isci/host.c:2498: warning: expecting prototype for This method allocates remote node index and the reserves the remote node(). Prototype was for sci_controller_allocate_remote_node_context() instead
drivers/scsi/isci/host.c:2721: warning: Function parameter or member 'ihost' not described in 'sci_controller_start_task'
drivers/scsi/isci/host.c:2721: warning: Function parameter or member 'idev' not described in 'sci_controller_start_task'
drivers/scsi/isci/host.c:2721: warning: Function parameter or member 'ireq' not described in 'sci_controller_start_task'
drivers/scsi/isci/host.c:2721: warning: Excess function parameter 'controller' description in 'sci_controller_start_task'
drivers/scsi/isci/host.c:2721: warning: Excess function parameter 'remote_device' description in 'sci_controller_start_task'
drivers/scsi/isci/host.c:2721: warning: Excess function parameter 'task_request' description in 'sci_controller_start_task'
Link: https://lore.kernel.org/r/20210317091230.2912389-22-lee.jones@linaro.org
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/isci/request.c:211: warning: wrong kernel-doc identifier on line:
drivers/scsi/isci/request.c:414: warning: wrong kernel-doc identifier on line:
drivers/scsi/isci/request.c:472: warning: Function parameter or member 'ireq' not described in 'scu_ssp_task_request_construct_task_context'
drivers/scsi/isci/request.c:472: warning: expecting prototype for The(). Prototype was for scu_ssp_task_request_construct_task_context() instead
drivers/scsi/isci/request.c:501: warning: Function parameter or member 'ireq' not described in 'scu_sata_request_construct_task_context'
drivers/scsi/isci/request.c:501: warning: expecting prototype for This method is will fill in the SCU Task Context for any type of SATA(). Prototype was for scu_sata_request_construct_task_context() instead
drivers/scsi/isci/request.c:597: warning: Cannot understand *
drivers/scsi/isci/request.c:785: warning: expecting prototype for sci_req_tx_bytes(). Prototype was for SCU_TASK_CONTEXT_SRAM() instead
drivers/scsi/isci/request.c:1399: warning: Cannot understand *
drivers/scsi/isci/request.c:1446: warning: Cannot understand *
drivers/scsi/isci/request.c:2465: warning: Function parameter or member 'task' not described in 'isci_request_process_response_iu'
drivers/scsi/isci/request.c:2465: warning: Excess function parameter 'sas_task' description in 'isci_request_process_response_iu'
drivers/scsi/isci/request.c:2501: warning: Function parameter or member 'task' not described in 'isci_request_set_open_reject_status'
drivers/scsi/isci/request.c:2524: warning: Function parameter or member 'idev' not described in 'isci_request_handle_controller_specific_errors'
drivers/scsi/isci/request.c:2524: warning: Function parameter or member 'task' not described in 'isci_request_handle_controller_specific_errors'
drivers/scsi/isci/request.c:3337: warning: Function parameter or member 'idev' not described in 'isci_io_request_build'
drivers/scsi/isci/request.c:3337: warning: Excess function parameter 'sci_device' description in 'isci_io_request_build'
[mkp: fix typo reported by checkpatch]
Link: https://lore.kernel.org/r/20210317091230.2912389-21-lee.jones@linaro.org
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/isci/phy.c:354: warning: Function parameter or member 'iphy' not described in 'phy_get_non_dummy_port'
drivers/scsi/isci/phy.c:354: warning: expecting prototype for If the phy is(). Prototype was for phy_get_non_dummy_port() instead
drivers/scsi/isci/phy.c:371: warning: Function parameter or member 'iphy' not described in 'sci_phy_set_port'
drivers/scsi/isci/phy.c:371: warning: Function parameter or member 'iport' not described in 'sci_phy_set_port'
Link: https://lore.kernel.org/r/20210317091230.2912389-20-lee.jones@linaro.org
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/isci/phy.c:354: warning: Function parameter or member 'iphy' not described in 'phy_get_non_dummy_port'
drivers/scsi/isci/phy.c:354: warning: expecting prototype for If the phy is(). Prototype was for phy_get_non_dummy_port() instead
drivers/scsi/isci/phy.c:364: warning: wrong kernel-doc identifier on line:
drivers/scsi/isci/phy.c:401: warning: wrong kernel-doc identifier on line:
drivers/scsi/isci/phy.c:611: warning: Function parameter or member 'iphy' not described in 'sci_phy_complete_link_training'
drivers/scsi/isci/phy.c:611: warning: Excess function parameter 'sci_phy' description in 'sci_phy_complete_link_training'
drivers/scsi/isci/phy.c:1170: warning: Cannot understand *
drivers/scsi/isci/phy.c:1222: warning: Cannot understand *
drivers/scsi/isci/phy.c:1432: warning: Function parameter or member 'sas_phy' not described in 'isci_phy_control'
drivers/scsi/isci/phy.c:1432: warning: Excess function parameter 'phy' description in 'isci_phy_control'
Link: https://lore.kernel.org/r/20210317091230.2912389-17-lee.jones@linaro.org
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/isci/port.c:65:13: warning: no previous prototype for ‘port_state_name’ [-Wmissing-prototypes]
Link: https://lore.kernel.org/r/20210317091125.2910058-8-lee.jones@linaro.org
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/isci/remote_device.c:1387:6: warning: no previous prototype for ‘isci_remote_device_wait_for_resume_from_abort’ [-Wmissing-prototypes]
Link: https://lore.kernel.org/r/20210317091125.2910058-7-lee.jones@linaro.org
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch removes unneeded return variables. It fixes the following
warning detected by coccinelle:
./drivers/scsi/isci/request.c:1483:17-23: Unneeded variable: "status".
Return "SCI_SUCCESS" on line 1503
./drivers/scsi/isci/request.c:2157:17-23: Unneeded variable: "status".
Return "SCI_SUCCESS" on line 2177
Link: https://lore.kernel.org/r/1612424915-106608-1-git-send-email-yang.lee@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
libsas event notifiers required an extension where gfp_t flags must be
explicitly passed. For bisectability, a temporary _gfp() variant of such
functions were added. All call sites then got converted use the _gfp()
variants and explicitly pass GFP context. Having no callers left, the
original libsas notifiers were then modified to accept gfp_t flags by
default.
Switch back to the original libas API, while still passing GFP context.
The libsas _gfp() variants will be removed afterwards.
Link: https://lore.kernel.org/r/20210118100955.1761652-18-a.darwish@linutronix.de
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
LLDDs report events to libsas with .notify_port_event and .notify_phy_event
callbacks.
These callbacks are fixed and so there is no reason why the functions
cannot be called directly, so do that.
This neatens the code slightly, makes it more obvious, and reduces function
pointer usage, which is generally a good thing. Downside is that there are
2x more symbol exports.
[a.darwish@linutronix.de: Remove the now unused "sas_ha" local variables]
Link: https://lore.kernel.org/r/20210118100955.1761652-3-a.darwish@linutronix.de
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The variable 'status' is being initialized with SCI_SUCCESS and never
updated later with a new value. The initialization is redundant and can be
removed.
Link: https://lore.kernel.org/r/1609311860-102820-1-git-send-email-abaci-bugfix@linux.alibaba.com
Reported-by: Abaci <abaci@linux.alibaba.com>
Signed-off-by: YANG LI <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
PCI helper functions such as pci_enable/disable_device(),
pci_save/restore_state(), pci_set_power_state(), etc. were used by the
legacy framework to perform standard operations related to PCI PM.
This driver is using the generic framework and thus calls for those
functions should be dropped as those tasks are now performed by the PCI
core.
Link: https://lore.kernel.org/r/20201107100420.149521-1-vaibhavgupta40@gmail.com
Acked-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The set of core changes here is Christoph's submission path cleanups.
These introduced a couple of regressions when first proposed so they
got held over from the initial merge window pull request to give more
testing time, which they've now had and Syzbot has confirmed the
regression it detected is fixed. The other main changes are two
driver updates (arcmsr, pm80xx) and assorted minor clean ups.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX5MkQCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishRkuAPsEAR/W
NS7J7j66rF2x15xGR2CNB4R6FEBSd/hdOPp7cQEA4rtLKKI53W4oydKsfTux6N6o
MLZJIHM5nTitk++AVQs=
=QgpC
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"The set of core changes here is Christoph's submission path cleanups.
These introduced a couple of regressions when first proposed so they
got held over from the initial merge window pull request to give more
testing time, which they've now had and Syzbot has confirmed the
regression it detected is fixed.
The other main changes are two driver updates (arcmsr, pm80xx) and
assorted minor clean ups"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (38 commits)
scsi: qla2xxx: Fix return of uninitialized value in rval
scsi: core: Set sc_data_direction to DMA_NONE for no-transfer commands
scsi: sr: Initialize ->cmd_len
scsi: arcmsr: Update driver version to v1.50.00.02-20200819
scsi: arcmsr: Add support for ARC-1886 series RAID controllers
scsi: arcmsr: Fix device hot-plug monitoring timer stop
scsi: arcmsr: Remove unnecessary syntax
scsi: pm80xx: Driver version update
scsi: pm80xx: Increase the number of outstanding I/O supported to 1024
scsi: pm80xx: Remove DMA memory allocation for ccb and device structures
scsi: pm80xx: Increase number of supported queues
scsi: sym53c8xx_2: Fix sizeof() mismatch
scsi: isci: Fix a typo in a comment
scsi: qla4xxx: Fix inconsistent format argument type
scsi: myrb: Fix inconsistent format argument types
scsi: myrb: Remove redundant assignment to variable timeout
scsi: bfa: Fix error return in bfad_pci_init()
scsi: fcoe: Simplify the return expression of fcoe_sysfs_setup()
scsi: snic: Simplify the return expression of svnic_cq_alloc()
scsi: fnic: Simplify the return expression of vnic_wq_copy_alloc()
...
This series consists of the usual driver updates (ufs, qla2xxx, tcmu,
ibmvfc, lpfc, smartpqi, hisi_sas, qedi, qedf, mpt3sas) and minor bug
fixes. There are only three core changes: adding sense codes,
cleaning up noretry and adding an option for limitless retries.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX4YulyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishaZDAQCT7rwG
UEZYHgYkU9EX9ERVBQM0SW4mLrxf3g3P5ioJsAEAtkclCM4QsIOP+MIPjIa0EyUY
khu0kcrmeFR2YwA8zhw=
=4w4S
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"The usual driver updates (ufs, qla2xxx, tcmu, ibmvfc, lpfc, smartpqi,
hisi_sas, qedi, qedf, mpt3sas) and minor bug fixes.
There are only three core changes: adding sense codes, cleaning up
noretry and adding an option for limitless retries"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (226 commits)
scsi: hisi_sas: Recover PHY state according to the status before reset
scsi: hisi_sas: Filter out new PHY up events during suspend
scsi: hisi_sas: Add device link between SCSI devices and hisi_hba
scsi: hisi_sas: Add check for methods _PS0 and _PR0
scsi: hisi_sas: Add controller runtime PM support for v3 hw
scsi: hisi_sas: Switch to new framework to support suspend and resume
scsi: hisi_sas: Use hisi_hba->cq_nvecs for calling calling synchronize_irq()
scsi: qedf: Remove redundant assignment to variable 'rc'
scsi: lpfc: Remove unneeded variable 'status' in lpfc_fcp_cpu_map_store()
scsi: snic: Convert to use DEFINE_SEQ_ATTRIBUTE macro
scsi: qla4xxx: Delete unneeded variable 'status' in qla4xxx_process_ddb_changed
scsi: sun_esp: Use module_platform_driver to simplify the code
scsi: sun3x_esp: Use module_platform_driver to simplify the code
scsi: sni_53c710: Use module_platform_driver to simplify the code
scsi: qlogicpti: Use module_platform_driver to simplify the code
scsi: mac_esp: Use module_platform_driver to simplify the code
scsi: jazz_esp: Use module_platform_driver to simplify the code
scsi: mvumi: Fix error return in mvumi_io_attach()
scsi: lpfc: Drop nodelist reference on error in lpfc_gen_req()
scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs()
...
This addresses the following sparse warning:
drivers/scsi/isci/phy.c:672:6: warning: symbol
'scu_link_layer_set_txcomsas_timeout' was not declared. Should it be
static?
Link: https://lore.kernel.org/r/20200915084000.2826741-1-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
