The name of callback cpuid_update() is misleading that it's not about
updating CPUID settings of vcpu but updating the configurations of vcpu
based on the CPUIDs. So rename it to vcpu_after_set_cpuid().
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200709043426.92712-5-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of creating the mask for guest CR4 reserved bits in kvm_valid_cr4(),
do it in kvm_update_cpuid() so that it can be reused instead of creating it
each time kvm_valid_cr4() is called.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Message-Id: <1594168797-29444-2-git-send-email-krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make 'struct kvm_mmu_page' MMU-only, nothing outside of the MMU should
be poking into the gory details of shadow pages.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200622202034.15093-5-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Both the vcpu_vmx structure and the vcpu_svm structure have a
'last_cpu' field. Move the common field into the kvm_vcpu_arch
structure. For clarity, rename it to 'last_vmentry_cpu.'
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Message-Id: <20200603235623.245638-6-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move .write_log_dirty() into kvm_x86_nested_ops to help differentiate it
from the non-nested dirty log hooks. And because it's a nested-only
operation.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200622215832.22090-5-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly pass the L2 GPA to kvm_arch_write_log_dirty(), which for all
intents and purposes is vmx_write_pml_buffer(), instead of having the
latter pull the GPA from vmcs.GUEST_PHYSICAL_ADDRESS. If the dirty bit
update is the result of KVM emulation (rare for L2), then the GPA in the
VMCS may be stale and/or hold a completely unrelated GPA.
Fixes: c5f983f6e8 ("nVMX: Implement emulated Page Modification Logging")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200622215832.22090-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The following race can cause lost map update events:
cpu1 cpu2
apic_map_dirty = true
------------------------------------------------------------
kvm_recalculate_apic_map:
pass check
mutex_lock(&kvm->arch.apic_map_lock);
if (!kvm->arch.apic_map_dirty)
and in process of updating map
-------------------------------------------------------------
other calls to
apic_map_dirty = true might be too late for affected cpu
-------------------------------------------------------------
apic_map_dirty = false
-------------------------------------------------------------
kvm_recalculate_apic_map:
bail out on
if (!kvm->arch.apic_map_dirty)
To fix it, record the beginning of an update of the APIC map in
apic_map_dirty. If another APIC map change switches apic_map_dirty
back to DIRTY during the update, kvm_recalculate_apic_map should not
make it CLEAN, and the other caller will go through the slow path.
Reported-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
'Page not present' event may or may not get injected depending on
guest's state. If the event wasn't injected, there is no need to
inject the corresponding 'page ready' event as the guest may get
confused. E.g. Linux thinks that the corresponding 'page not present'
event wasn't delivered *yet* and allocates a 'dummy entry' for it.
This entry is never freed.
Note, 'wakeup all' events have no corresponding 'page not present'
event and always get injected.
s390 seems to always be able to inject 'page not present', the
change is effectively a nop.
Suggested-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200610175532.779793-2-vkuznets@redhat.com>
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=208081
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make x86_fpu_cache static now that FPU allocation and destruction is
handled entirely by common x86 code.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200608180218.20946-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Move the arch-specific code into arch/arm64/kvm
- Start the post-32bit cleanup
- Cherry-pick a few non-invasive pre-NV patches
x86:
- Rework of TLB flushing
- Rework of event injection, especially with respect to nested virtualization
- Nested AMD event injection facelift, building on the rework of generic code
and fixing a lot of corner cases
- Nested AMD live migration support
- Optimization for TSC deadline MSR writes and IPIs
- Various cleanups
- Asynchronous page fault cleanups (from tglx, common topic branch with tip tree)
- Interrupt-based delivery of asynchronous "page ready" events (host side)
- Hyper-V MSRs and hypercalls for guest debugging
- VMX preemption timer fixes
s390:
- Cleanups
Generic:
- switch vCPU thread wakeup from swait to rcuwait
The other architectures, and the guest side of the asynchronous page fault
work, will come next week.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl7VJcYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPf6QgAq4wU5wdd1lTGz/i3DIhNVJNJgJlp
ozLzRdMaJbdbn5RpAK6PEBd9+pt3+UlojpFB3gpJh2Nazv2OzV4yLQgXXXyyMEx1
5Hg7b4UCJYDrbkCiegNRv7f/4FWDkQ9dx++RZITIbxeskBBCEI+I7GnmZhGWzuC4
7kj4ytuKAySF2OEJu0VQF6u0CvrNYfYbQIRKBXjtOwuRK4Q6L63FGMJpYo159MBQ
asg3B1jB5TcuGZ9zrjL5LkuzaP4qZZHIRs+4kZsH9I6MODHGUxKonrkablfKxyKy
CFK+iaHCuEXXty5K0VmWM3nrTfvpEjVjbMc7e1QGBQ5oXsDM0pqn84syRg==
=v7Wn
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Move the arch-specific code into arch/arm64/kvm
- Start the post-32bit cleanup
- Cherry-pick a few non-invasive pre-NV patches
x86:
- Rework of TLB flushing
- Rework of event injection, especially with respect to nested
virtualization
- Nested AMD event injection facelift, building on the rework of
generic code and fixing a lot of corner cases
- Nested AMD live migration support
- Optimization for TSC deadline MSR writes and IPIs
- Various cleanups
- Asynchronous page fault cleanups (from tglx, common topic branch
with tip tree)
- Interrupt-based delivery of asynchronous "page ready" events (host
side)
- Hyper-V MSRs and hypercalls for guest debugging
- VMX preemption timer fixes
s390:
- Cleanups
Generic:
- switch vCPU thread wakeup from swait to rcuwait
The other architectures, and the guest side of the asynchronous page
fault work, will come next week"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (256 commits)
KVM: selftests: fix rdtsc() for vmx_tsc_adjust_test
KVM: check userspace_addr for all memslots
KVM: selftests: update hyperv_cpuid with SynDBG tests
x86/kvm/hyper-v: Add support for synthetic debugger via hypercalls
x86/kvm/hyper-v: enable hypercalls regardless of hypercall page
x86/kvm/hyper-v: Add support for synthetic debugger interface
x86/hyper-v: Add synthetic debugger definitions
KVM: selftests: VMX preemption timer migration test
KVM: nVMX: Fix VMX preemption timer migration
x86/kvm/hyper-v: Explicitly align hcall param for kvm_hyperv_exit
KVM: x86/pmu: Support full width counting
KVM: x86/pmu: Tweak kvm_pmu_get_msr to pass 'struct msr_data' in
KVM: x86: announce KVM_FEATURE_ASYNC_PF_INT
KVM: x86: acknowledgment mechanism for async pf page ready notifications
KVM: x86: interrupt based APF 'page ready' event delivery
KVM: introduce kvm_read_guest_offset_cached()
KVM: rename kvm_arch_can_inject_async_page_present() to kvm_arch_can_dequeue_async_page_present()
KVM: x86: extend struct kvm_vcpu_pv_apf_data with token info
Revert "KVM: async_pf: Fix #DF due to inject "Page not Present" and "Page Ready" exceptions simultaneously"
KVM: VMX: Replace zero-length array with flexible-array
...
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAl7WhbkTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXlUnB/0R8dBVSeRfNmyJaadBWKFc/LffwKLD
CQ8PVv22ffkCaEYV2tpnhS6NmkERLNdson4Uo02tVUsjOJ4CrWHTn7aKqYWZyA+O
qv/PiD9TBXJVYMVP2kkyaJlK5KoqeAWBr2kM16tT0cxQmlhE7g0Xo2wU9vhRbU+4
i4F0jffe4lWps65TK392CsPr6UEv1HSel191Py5zLzYqChT+L8WfahmBt3chhsV5
TIUJYQvBwxecFRla7yo+4sUn37ZfcTqD1hCWSr0zs4psW0ge7d80kuaNZS+EqxND
fGm3Bp1BlUuDKsJ/D+AaHLCR47PUZ9t9iMDjZS/ovYglLFwi+h3tAV+W
=LwVR
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyper-v updates from Wei Liu:
- a series from Andrea to support channel reassignment
- a series from Vitaly to clean up Vmbus message handling
- a series from Michael to clean up and augment hyperv-tlfs.h
- patches from Andy to clean up GUID usage in Hyper-V code
- a few other misc patches
* tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (29 commits)
Drivers: hv: vmbus: Resolve more races involving init_vp_index()
Drivers: hv: vmbus: Resolve race between init_vp_index() and CPU hotplug
vmbus: Replace zero-length array with flexible-array
Driver: hv: vmbus: drop a no long applicable comment
hyper-v: Switch to use UUID types directly
hyper-v: Replace open-coded variant of %*phN specifier
hyper-v: Supply GUID pointer to printf() like functions
hyper-v: Use UUID API for exporting the GUID (part 2)
asm-generic/hyperv: Add definitions for Get/SetVpRegister hypercalls
x86/hyperv: Split hyperv-tlfs.h into arch dependent and independent files
x86/hyperv: Remove HV_PROCESSOR_POWER_STATE #defines
KVM: x86: hyperv: Remove duplicate definitions of Reference TSC Page
drivers: hv: remove redundant assignment to pointer primary_channel
scsi: storvsc: Re-init stor_chns when a channel interrupt is re-assigned
Drivers: hv: vmbus: Introduce the CHANNELMSG_MODIFYCHANNEL message type
Drivers: hv: vmbus: Synchronize init_vp_index() vs. CPU hotplug
Drivers: hv: vmbus: Remove the unused HV_LOCALIZED channel affinity logic
PCI: hv: Prepare hv_compose_msi_msg() for the VMBus-channel-interrupt-to-vCPU reassignment functionality
Drivers: hv: vmbus: Use a spin lock for synchronizing channel scheduling vs. channel removal
hv_utils: Always execute the fcopy and vss callbacks in a tasklet
...
Add support for Hyper-V synthetic debugger (syndbg) interface.
The syndbg interface is using MSRs to emulate a way to send/recv packets
data.
The debug transport dll (kdvm/kdnet) will identify if Hyper-V is enabled
and if it supports the synthetic debugger interface it will attempt to
use it, instead of trying to initialize a network adapter.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20200529134543.1127440-4-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Intel CPUs have a new alternative MSR range (starting from MSR_IA32_PMC0)
for GP counters that allows writing the full counter width. Enable this
range from a new capability bit (IA32_PERF_CAPABILITIES.FW_WRITE[bit 13]).
The guest would query CPUID to get the counter width, and sign extends
the counter values as needed. The traditional MSRs always limit to 32bit,
even though the counter internally is larger (48 or 57 bits).
When the new capability is set, use the alternative range which do not
have these restrictions. This lowers the overhead of perf stat slightly
because it has to do less interrupts to accumulate the counter value.
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20200529074347.124619-3-like.xu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If two page ready notifications happen back to back the second one is not
delivered and the only mechanism we currently have is
kvm_check_async_pf_completion() check in vcpu_run() loop. The check will
only be performed with the next vmexit when it happens and in some cases
it may take a while. With interrupt based page ready notification delivery
the situation is even worse: unlike exceptions, interrupts are not handled
immediately so we must check if the slot is empty. This is slow and
unnecessary. Introduce dedicated MSR_KVM_ASYNC_PF_ACK MSR to communicate
the fact that the slot is free and host should check its notification
queue. Mandate using it for interrupt based 'page ready' APF event
delivery.
As kvm_check_async_pf_completion() is going away from vcpu_run() we need
a way to communicate the fact that vcpu->async_pf.done queue has
transitioned from empty to non-empty state. Introduce
kvm_arch_async_page_present_queued() and KVM_REQ_APF_READY to do the job.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200525144125.143875-7-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Concerns were expressed around APF delivery via synthetic #PF exception as
in some cases such delivery may collide with real page fault. For 'page
ready' notifications we can easily switch to using an interrupt instead.
Introduce new MSR_KVM_ASYNC_PF_INT mechanism and deprecate the legacy one.
One notable difference between the two mechanisms is that interrupt may not
get handled immediately so whenever we would like to deliver next event
(regardless of its type) we must be sure the guest had read and cleared
previous event in the slot.
While on it, get rid on 'type 1/type 2' names for APF events in the
documentation as they are causing confusion. Use 'page not present'
and 'page ready' everywhere instead.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200525144125.143875-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
An innocent reader of the following x86 KVM code:
bool kvm_arch_can_inject_async_page_present(struct kvm_vcpu *vcpu)
{
if (!(vcpu->arch.apf.msr_val & KVM_ASYNC_PF_ENABLED))
return true;
...
may get very confused: if APF mechanism is not enabled, why do we report
that we 'can inject async page present'? In reality, upon injection
kvm_arch_async_page_present() will check the same condition again and,
in case APF is disabled, will just drop the item. This is fine as the
guest which deliberately disabled APF doesn't expect to get any APF
notifications.
Rename kvm_arch_can_inject_async_page_present() to
kvm_arch_can_dequeue_async_page_present() to make it clear what we are
checking: if the item can be dequeued (meaning either injected or just
dropped).
On s390 kvm_arch_can_inject_async_page_present() always returns 'true' so
the rename doesn't matter much.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200525144125.143875-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, APF mechanism relies on the #PF abuse where the token is being
passed through CR2. If we switch to using interrupts to deliver page-ready
notifications we need a different way to pass the data. Extent the existing
'struct kvm_vcpu_pv_apf_data' with token information for page-ready
notifications.
While on it, rename 'reason' to 'flags'. This doesn't change the semantics
as we only have reasons '1' and '2' and these can be treated as bit flags
but KVM_PV_REASON_PAGE_READY is going away with interrupt based delivery
making 'reason' name misleading.
The newly introduced apf_put_user_ready() temporary puts both flags and
token information, this will be changed to put token only when we switch
to interrupt based notifications.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200525144125.143875-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The L1 flags can be found in the save area of svm->nested.hsave, fish
it from there so that there is one fewer thing to migrate.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that the int_ctl field is stored in svm->nested.ctl.int_ctl, we can
use it instead of vcpu->arch.hflags to check whether L2 is running
in V_INTR_MASKING mode.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This allows exceptions injected by the emulator to be properly delivered
as vmexits. The code also becomes simpler, because we can just let all
L0-intercepted exceptions go through the usual path. In particular, our
emulation of the VMX #DB exit qualification is very much simplified,
because the vmexit injection path can use kvm_deliver_exception_payload
to update DR6.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In case an interrupt arrives after nested.check_events but before the
call to kvm_cpu_has_injectable_intr, we could end up enabling the interrupt
window even if the interrupt is actually going to be a vmexit. This is
useless rather than harmful, but it really complicates reasoning about
SVM's handling of the VINTR intercept. We'd like to never bother with
the VINTR intercept if V_INTR_MASKING=1 && INTERCEPT_INTR=1, because in
that case there is no interrupt window and we can just exit the nested
guest whenever we want.
This patch moves the opening of the interrupt window inside
inject_pending_event. This consolidates the check for pending
interrupt/NMI/SMI in one place, and makes KVM's usage of immediate
exits more consistent, extending it beyond just nested virtualization.
There are two functional changes here. They only affect corner cases,
but overall they simplify the inject_pending_event.
- re-injection of still-pending events will also use req_immediate_exit
instead of using interrupt-window intercepts. This should have no impact
on performance on Intel since it simply replaces an interrupt-window
or NMI-window exit for a preemption-timer exit. On AMD, which has no
equivalent of the preemption time, it may incur some overhead but an
actual effect on performance should only be visible in pathological cases.
- kvm_arch_interrupt_allowed and kvm_vcpu_has_events will return true
if an interrupt, NMI or SMI is blocked by nested_run_pending. This
makes sense because entering the VM will allow it to make progress
and deliver the event.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Take a u32 for the index in has_emulated_msr() to match hardware, which
treats MSR indices as unsigned 32-bit values. Functionally, taking a
signed int doesn't cause problems with the current code base, but could
theoretically cause problems with 32-bit KVM, e.g. if the index were
checked via a less-than statement, which would evaluate incorrectly for
MSR indices with bit 31 set.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200218234012.7110-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Hyper-V Reference TSC Page structure is defined twice. struct
ms_hyperv_tsc_page has padding out to a full 4 Kbyte page size. But
the padding is not needed because the declaration includes a union
with HV_HYP_PAGE_SIZE. KVM uses the second definition, which is
struct _HV_REFERENCE_TSC_PAGE, because it does not have the padding.
Fix the duplication by removing the padding from ms_hyperv_tsc_page.
Fix up the KVM code to use it. Remove the no longer used struct
_HV_REFERENCE_TSC_PAGE.
There is no functional change.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20200422195737.10223-2-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Two new stats for exposing halt-polling cpu usage:
halt_poll_success_ns
halt_poll_fail_ns
Thus sum of these 2 stats is the total cpu time spent polling. "success"
means the VCPU polled until a virtual interrupt was delivered. "fail"
means the VCPU had to schedule out (either because the maximum poll time
was reached or it needed to yield the CPU).
To avoid touching every arch's kvm_vcpu_stat struct, only update and
export halt-polling cpu usage stats if we're on x86.
Exporting cpu usage as a u64 and in nanoseconds means we will overflow at
~500 years, which seems reasonably large.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Jon Cargille <jcargill@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20200508182240.68440-1-jcargill@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The hrtimer used to emulate the VMX-preemption timer must be pinned to
the same logical processor as the vCPU thread to be interrupted if we
want to have any hope of adhering to the architectural specification
of the VMX-preemption timer. Even with this change, the emulated
VMX-preemption timer VM-exit occasionally arrives too late.
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Message-Id: <20200508203643.85477-4-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Adds a fastpath_t typedef since enum lines are a bit long, and replace
EXIT_FASTPATH_SKIP_EMUL_INS with two new exit_fastpath_completion enum values.
- EXIT_FASTPATH_EXIT_HANDLED kvm will still go through it's full run loop,
but it would skip invoking the exit handler.
- EXIT_FASTPATH_REENTER_GUEST complete fastpath, guest can be re-entered
without invoking the exit handler or going
back to vcpu_run
Tested-by: Haiwei Li <lihaiwei@tencent.com>
Cc: Haiwei Li <lihaiwei@tencent.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1588055009-12677-4-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Forcing the ASYNC_PF_PER_VCPU to be power of two is much easier to be
used rather than calling roundup_pow_of_two() from time to time. Do
this by adding a BUILD_BUG_ON() inside the hash function.
Another point is that generally async pf does not allow concurrency
over ASYNC_PF_PER_VCPU after all (see kvm_setup_async_pf()), so it
does not make much sense either to have it not a power of two or some
of the entries will definitely be wasted.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200416155859.267366-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace KVM's PT_PAGE_TABLE_LEVEL, PT_DIRECTORY_LEVEL and PT_PDPE_LEVEL
with the kernel's PG_LEVEL_4K, PG_LEVEL_2M and PG_LEVEL_1G. KVM's
enums are borderline impossible to remember and result in code that is
visually difficult to audit, e.g.
if (!enable_ept)
ept_lpage_level = 0;
else if (cpu_has_vmx_ept_1g_page())
ept_lpage_level = PT_PDPE_LEVEL;
else if (cpu_has_vmx_ept_2m_page())
ept_lpage_level = PT_DIRECTORY_LEVEL;
else
ept_lpage_level = PT_PAGE_TABLE_LEVEL;
versus
if (!enable_ept)
ept_lpage_level = 0;
else if (cpu_has_vmx_ept_1g_page())
ept_lpage_level = PG_LEVEL_1G;
else if (cpu_has_vmx_ept_2m_page())
ept_lpage_level = PG_LEVEL_2M;
else
ept_lpage_level = PG_LEVEL_4K;
No functional change intended.
Suggested-by: Barret Rhoden <brho@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200428005422.4235-4-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename PT_MAX_HUGEPAGE_LEVEL to KVM_MAX_HUGEPAGE_LEVEL and make it a
separate define in anticipation of dropping KVM's PT_*_LEVEL enums in
favor of the kernel's PG_LEVEL_* enums.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200428005422.4235-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vcpu->arch.guest_xstate_size lost its only user since commit df1daba7d1
("KVM: x86: support XSAVES usage in the host"), so clean it up.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200429154312.1411-1-xiaoyao.li@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Snapshot the TDP level now that it's invariant (SVM) or dependent only
on host capabilities and guest CPUID (VMX). This avoids having to call
kvm_x86_ops.get_tdp_level() when initializing a TDP MMU and/or
calculating the page role, and thus avoids the associated retpoline.
Drop the WARN in vmx_get_tdp_level() as updating CPUID while L2 is
active is legal, if dodgy.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200502043234.12481-11-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move CR0 caching into the standard register caching mechanism in order
to take advantage of the availability checks provided by regs_avail.
This avoids multiple VMREADs in the (uncommon) case where kvm_read_cr0()
is called multiple times in a single VM-Exit, and more importantly
eliminates a kvm_x86_ops hook, saves a retpoline on SVM when reading
CR0, and squashes the confusing naming discrepancy of "cache_reg" vs.
"decache_cr0_guest_bits".
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200502043234.12481-8-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move CR4 caching into the standard register caching mechanism in order
to take advantage of the availability checks provided by regs_avail.
This avoids multiple VMREADs and retpolines (when configured) during
nested VMX transitions as kvm_read_cr4_bits() is invoked multiple times
on each transition, e.g. when stuffing CR0 and CR3.
As an added bonus, this eliminates a kvm_x86_ops hook, saves a retpoline
on SVM when reading CR4, and squashes the confusing naming discrepancy
of "cache_reg" vs. "decache_cr4_guest_bits".
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200502043234.12481-7-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Save L1's TSC offset in 'struct kvm_vcpu_arch' and drop the kvm_x86_ops
hook read_l1_tsc_offset(). This avoids a retpoline (when configured)
when reading L1's effective TSC, which is done at least once on every
VM-Exit.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200502043234.12481-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an argument to interrupt_allowed and nmi_allowed, to checking if
interrupt injection is blocked. Use the hook to handle the case where
an interrupt arrives between check_nested_events() and the injection
logic. Drop the retry of check_nested_events() that hack-a-fixed the
same condition.
Blocking injection is also a bit of a hack, e.g. KVM should do exiting
and non-exiting interrupt processing in a single pass, but it's a more
precise hack. The old comment is also misleading, e.g. KVM_REQ_EVENT is
purely an optimization, setting it on every run loop (which KVM doesn't
do) should not affect functionality, only performance.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200423022550.15113-13-sean.j.christopherson@intel.com>
[Extend to SVM, add SMI and NMI. Even though NMI and SMI cannot come
asynchronously right now, making the fix generic is easy and removes a
special case. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return an actual bool for kvm_x86_ops' {interrupt_nmi}_allowed() hook to
better reflect the return semantics, and to avoid creating an even
bigger mess when the related VMX code is refactored in upcoming patches.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200423022550.15113-5-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a kvm_x86_ops hook to detect a nested pending "hypervisor timer" and
use it to effectively open a window for servicing the expired timer.
Like pending SMIs on VMX, opening a window simply means requesting an
immediate exit.
This fixes a bug where an expired VMX preemption timer (for L2) will be
delayed and/or lost if a pending exception is injected into L2. The
pending exception is rightly prioritized by vmx_check_nested_events()
and injected into L2, with the preemption timer left pending. Because
no window opened, L2 is free to run uninterrupted.
Fixes: f4124500c2 ("KVM: nVMX: Fully emulate preemption timer")
Reported-by: Jim Mattson <jmattson@google.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Peter Shier <pshier@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200423022550.15113-3-sean.j.christopherson@intel.com>
[Check it in kvm_vcpu_has_events too, to ensure that the preemption
timer is serviced promptly even if the vCPU is halted and L1 is not
intercepting HLT. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Though rdpkru and wrpkru are contingent upon CR4.PKE, the PKRU
resource isn't. It can be read with XSAVE and written with XRSTOR.
So, if we don't set the guest PKRU value here(kvm_load_guest_xsave_state),
the guest can read the host value.
In case of kvm_load_host_xsave_state, guest with CR4.PKE clear could
potentially use XRSTOR to change the host PKRU value.
While at it, move pkru state save/restore to common code and the
host_pkru field to kvm_vcpu_arch. This will let SVM support protection keys.
Cc: stable@vger.kernel.org
Reported-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <158932794619.44260.14508381096663848853.stgit@naples-babu.amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are two issues with KVM_EXIT_DEBUG on AMD, whose root cause is the
different handling of DR6 on intercepted #DB exceptions on Intel and AMD.
On Intel, #DB exceptions transmit the DR6 value via the exit qualification
field of the VMCS, and the exit qualification only contains the description
of the precise event that caused a vmexit.
On AMD, instead the DR6 field of the VMCB is filled in as if the #DB exception
was to be injected into the guest. This has two effects when guest debugging
is in use:
* the guest DR6 is clobbered
* the kvm_run->debug.arch.dr6 field can accumulate more debug events, rather
than just the last one that happened (the testcase in the next patch covers
this issue).
This patch fixes both issues by emulating, so to speak, the Intel behavior
on AMD processors. The important observation is that (after the previous
patches) the VMCB value of DR6 is only ever observable from the guest is
KVM_DEBUGREG_WONT_EXIT is set. Therefore we can actually set vmcb->save.dr6
to any value we want as long as KVM_DEBUGREG_WONT_EXIT is clear, which it
will be if guest debugging is enabled.
Therefore it is possible to enter the guest with an all-zero DR6,
reconstruct the #DB payload from the DR6 we get at exit time, and let
kvm_deliver_exception_payload move the newly set bits into vcpu->arch.dr6.
Some extra bits may be included in the payload if KVM_DEBUGREG_WONT_EXIT
is set, but this is harmless.
This may not be the most optimized way to deal with this, but it is
simple and, being confined within SVM code, it gets rid of the set_dr6
callback and kvm_update_dr6.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_x86_ops.set_dr6 is only ever called with vcpu->arch.dr6 as the
second argument. Ensure that the VMCB value is synchronized to
vcpu->arch.dr6 on #DB (both "normal" and nested) and nested vmentry, so
that the current value of DR6 is always available in vcpu->arch.dr6.
The get_dr6 callback can just access vcpu->arch.dr6 and becomes redundant.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Go through kvm_queue_exception_p so that the payload is correctly delivered
through the exit qualification, and add a kvm_update_dr6 call to
kvm_deliver_exception_payload that is needed on AMD.
Reported-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Current logic incorrectly uses the enum ioapic_irq_destination_types
to check the posted interrupt destination types. However, the value was
set using APIC_DM_XXX macros, which are left-shifted by 8 bits.
Fixes by using the APIC_DM_FIXED and APIC_DM_LOWEST instead.
Fixes: (fdcf756213 'KVM: x86: Disable posted interrupts for non-standard IRQs delivery modes')
Cc: Alexander Graf <graf@amazon.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <1586239989-58305-1-git-send-email-suravee.suthikulpanit@amd.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up some of the patching of kvm_x86_ops, by moving kvm_x86_ops related to
nested virtualization into a separate struct.
As a result, these ops will always be non-NULL on VMX. This is not a problem:
* check_nested_events is only called if is_guest_mode(vcpu) returns true
* get_nested_state treats VMXOFF state the same as nested being disabled
* set_nested_state fails if you attempt to set nested state while
nesting is disabled
* nested_enable_evmcs could already be called on a CPU without VMX enabled
in CPUID.
* nested_get_evmcs_version was fixed in the previous patch
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
IPI and Timer cause the main MSRs write vmexits in cloud environment
observation, let's optimize virtual IPI latency more aggressively to
inject target IPI as soon as possible.
Running kvm-unit-tests/vmexit.flat IPI testing on SKX server, disable
adaptive advance lapic timer and adaptive halt-polling to avoid the
interference, this patch can give another 7% improvement.
w/o fastpath -> x86.c fastpath 4238 -> 3543 16.4%
x86.c fastpath -> vmx.c fastpath 3543 -> 3293 7%
w/o fastpath -> vmx.c fastpath 4238 -> 3293 22.3%
Cc: Haiwei Li <lihaiwei@tencent.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200410174703.1138-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a new "extended register" type, EXIT_INFO_2 (to pair with the
nomenclature in .get_exit_info()), and use it to cache VMX's
vmcs.EXIT_INTR_INFO. Drop a comment in vmx_recover_nmi_blocking() that
is obsoleted by the generic caching mechanism.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200415203454.8296-6-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a new "extended register" type, EXIT_INFO_1 (to pair with the
nomenclature in .get_exit_info()), and use it to cache VMX's
vmcs.EXIT_QUALIFICATION.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200415203454.8296-5-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename functions and variables in kvm_mmu_new_cr3() and related code to
replace "cr3" with "pgd", i.e. continue the work started by commit
727a7e27cf ("KVM: x86: rename set_cr3 callback and related flags to
load_mmu_pgd"). kvm_mmu_new_cr3() and company are not always loading a
new CR3, e.g. when nested EPT is enabled "cr3" is actually an EPTP.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-37-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a separate "skip" override for MMU sync, a future change to avoid
TLB flushes on nested VMX transitions may need to sync the MMU even if
the TLB flush is unnecessary.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-32-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the retrieval of the HPA associated with L1's APIC access page into
VMX code to avoid unnecessarily calling gfn_to_page(), e.g. when the
vCPU is in guest mode (L2). Alternatively, the optimization logic in
VMX could be mirrored into the common x86 code, but that will get ugly
fast when further optimizations are introduced.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-29-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add KVM_REQ_TLB_FLUSH_CURRENT to allow optimized TLB flushing of VMX's
EPTP/VPID contexts[*] from the KVM MMU and/or in a deferred manner, e.g.
to flush L2's context during nested VM-Enter.
Convert KVM_REQ_TLB_FLUSH to KVM_REQ_TLB_FLUSH_CURRENT in flows where
the flush is directly associated with vCPU-scoped instruction emulation,
i.e. MOV CR3 and INVPCID.
Add a comment in vmx_vcpu_load_vmcs() above its KVM_REQ_TLB_FLUSH to
make it clear that it deliberately requests a flush of all contexts.
Service any pending flush request on nested VM-Exit as it's possible a
nested VM-Exit could occur after requesting a flush for L2. Add the
same logic for nested VM-Enter even though it's _extremely_ unlikely
for flush to be pending on nested VM-Enter, but theoretically possible
(in the future) due to RSM (SMM) emulation.
[*] Intel also has an Address Space Identifier (ASID) concept, e.g.
EPTP+VPID+PCID == ASID, it's just not documented in the SDM because
the rules of invalidation are different based on which piece of the
ASID is being changed, i.e. whether the EPTP, VPID, or PCID context
must be invalidated.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-25-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename ->tlb_flush() to ->tlb_flush_all() in preparation for adding a
new hook to flush only the current ASID/context.
Opportunstically replace the comment in vmx_flush_tlb() that explains
why it flushes all EPTP/VPID contexts with a comment explaining why it
unconditionally uses INVEPT when EPT is enabled. I.e. rely on the "all"
part of the name to clarify why it does global INVEPT/INVVPID.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-23-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop @invalidate_gpa from ->tlb_flush() and kvm_vcpu_flush_tlb() now
that all callers pass %true for said param, or ignore the param (SVM has
an internal call to svm_flush_tlb() in svm_flush_tlb_guest that somewhat
arbitrarily passes %false).
Remove __vmx_flush_tlb() as it is no longer used.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-17-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hyper-V PV TLB flush mechanism does TLB flush on behalf of the guest
so doing tlb_flush_all() is an overkill, switch to using tlb_flush_guest()
(just like KVM PV TLB flush mechanism) instead. Introduce
KVM_REQ_HV_TLB_FLUSH to support the change.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a dedicated hook to handle flushing TLB entries on behalf of the
guest, i.e. for a paravirtualized TLB flush, and use it directly instead
of bouncing through kvm_vcpu_flush_tlb().
For VMX, change the effective implementation implementation to never do
INVEPT and flush only the current context, i.e. to always flush via
INVVPID(SINGLE_CONTEXT). The INVEPT performed by __vmx_flush_tlb() when
@invalidate_gpa=false and enable_vpid=0 is unnecessary, as it will only
flush guest-physical mappings; linear and combined mappings are flushed
by VM-Enter when VPID is disabled, and changes in the guest pages tables
do not affect guest-physical mappings.
When EPT and VPID are enabled, doing INVVPID is not required (by Intel's
architecture) to invalidate guest-physical mappings, i.e. TLB entries
that cache guest-physical mappings can live across INVVPID as the
mappings are associated with an EPTP, not a VPID. The intent of
@invalidate_gpa is to inform vmx_flush_tlb() that it must "invalidate
gpa mappings", i.e. do INVEPT and not simply INVVPID. Other than nested
VPID handling, which now calls vpid_sync_context() directly, the only
scenario where KVM can safely do INVVPID instead of INVEPT (when EPT is
enabled) is if KVM is flushing TLB entries from the guest's perspective,
i.e. is only required to invalidate linear mappings.
For SVM, flushing TLB entries from the guest's perspective can be done
by flushing the current ASID, as changes to the guest's page tables are
associated only with the current ASID.
Adding a dedicated ->tlb_flush_guest() paves the way toward removing
@invalidate_gpa, which is a potentially dangerous control flag as its
meaning is not exactly crystal clear, even for those who are familiar
with the subtleties of what mappings Intel CPUs are/aren't allowed to
keep across various invalidation scenarios.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-15-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wrap the combination of mmu->invlpg and kvm_x86_ops->tlb_flush_gva
into a new function. This function also lets us specify the host PGD to
invalidate and also the MMU, both of which will be useful in fixing and
simplifying kvm_inject_emulated_page_fault.
A nested guest's MMU however has g_context->invlpg == NULL. Instead of
setting it to nonpaging_invlpg, make kvm_mmu_invalidate_gva the only
entry point to mmu->invlpg and make a NULL invlpg pointer equivalent
to nonpaging_invlpg, saving a retpoline.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Export the page fault propagation helper so that VMX can use it to
correctly emulate TLB invalidation on page faults in an upcoming patch.
In the (hopefully) not-too-distant future, SGX virtualization will also
want access to the helper for injecting page faults to the correct level
(L1 vs. L2) when emulating ENCLS instructions.
Rename the function to kvm_inject_emulated_page_fault() to clarify that
it is (a) injecting a fault and (b) only for page faults. WARN if it's
invoked with an exception other than PF_VECTOR.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-6-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the __exit annotation from VMX hardware_unsetup(), the hook
can be reached during kvm_init() by way of kvm_arch_hardware_unsetup()
if failure occurs at various points during initialization.
Removing the annotation also lets us annotate vmx_x86_ops and svm_x86_ops
with __initdata; otherwise, objtool complains because it doesn't
understand that the vendor specific __initdata is being copied by value
to a non-__initdata instance.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321202603.19355-8-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the kvm_x86_ops pointer in common x86 with an instance of the
struct to save one pointer dereference when invoking functions. Copy the
struct by value to set the ops during kvm_init().
Arbitrarily use kvm_x86_ops.hardware_enable to track whether or not the
ops have been initialized, i.e. a vendor KVM module has been loaded.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321202603.19355-7-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the kvm_x86_ops functions that are used only within the scope of
kvm_init() into a separate struct, kvm_x86_init_ops. In addition to
identifying the init-only functions without restorting to code comments,
this also sets the stage for waiting until after ->hardware_setup() to
set kvm_x86_ops. Setting kvm_x86_ops after ->hardware_setup() is
desirable as many of the hooks are not usable until ->hardware_setup()
completes.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321202603.19355-3-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The set_cr3 callback is not setting the guest CR3, it is setting the
root of the guest page tables, either shadow or two-dimensional.
To make this clearer as well as to indicate that the MMU calls it
via kvm_mmu_load_cr3, rename it to load_mmu_pgd.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to what kvm-intel.ko is doing, provide a single callback that
merges svm_set_cr3, set_tdp_cr3 and nested_svm_set_tdp_cr3.
This lets us unify the set_cr3 and set_tdp_cr3 entries in kvm_x86_ops.
I'm doing that in this same patch because splitting it adds quite a bit
of churn due to the need for forward declarations. For the same reason
the assignment to vcpu->arch.mmu->set_cr3 is moved to kvm_init_shadow_mmu
from init_kvm_softmmu and nested_svm_init_mmu_context.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle CPUID 0x8000000A in the main switch in __do_cpuid_func() and drop
->set_supported_cpuid() now that both VMX and SVM implementations are
empty. Like leaf 0x14 (Intel PT) and leaf 0x8000001F (SEV), leaf
0x8000000A is is (obviously) vendor specific but can be queried in
common code while respecting SVM's wishes by querying kvm_cpu_cap_has().
Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move host_efer to common x86 code and use it for CPUID's is_efer_nx() to
avoid constantly re-reading the MSR.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Configure the max page level during hardware setup to avoid a retpoline
in the page fault handler. Drop ->get_lpage_level() as the page fault
handler was the last user.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Combine kvm_enable_tdp() and kvm_disable_tdp() into a single function,
kvm_configure_mmu(), in preparation for doing additional configuration
during hardware setup. And because having separate helpers is silly.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use vmx_pt_mode_is_host_guest() in intel_pmu_refresh() instead of
bouncing through kvm_x86_ops->pt_supported, and remove ->pt_supported()
as the PMU code was the last remaining user.
Opportunistically clean up the wording of a comment that referenced
kvm_x86_ops->pt_supported().
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check for MSR_TSC_AUX virtualization via kvm_cpu_cap_has() and drop
->rdtscp_supported().
Note, vmx_rdtscp_supported() needs to hang around a tiny bit longer due
other usage in VMX code.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set UMIP in kvm_cpu_caps when it is emulated by VMX, even though the
bit will effectively be dropped by do_host_cpuid(). This allows
checking for UMIP emulation via kvm_cpu_caps instead of a dedicated
kvm_x86_ops callback.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the clearing of the XSAVES CPUID bit into VMX, which has a separate
VMCS control to enable XSAVES in non-root, to eliminate the last ugly
renmant of the undesirable "unsigned f_* = *_supported ? F(*) : 0"
pattern in the common CPUID handling code.
Drop ->xsaves_supported(), CPUID adjustment was the only user.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the setting of the PKU CPUID bit into VMX to eliminate an instance
of the undesirable "unsigned f_* = *_supported ? F(*) : 0" pattern in
the common CPUID handling code. Drop ->pku_supported(), CPUID
adjustment was the only user.
Note, some AMD CPUs now support PKU, but SVM doesn't yet support
exposing it to a guest.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the INVPCID CPUID adjustments into VMX to eliminate an instance of
the undesirable "unsigned f_* = *_supported ? F(*) : 0" pattern in the
common CPUID handling code. Drop ->invpcid_supported(), CPUID
adjustment was the only user.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the explicit @func param from ->set_supported_cpuid() and instead
pull the CPUID function from the relevant entry. This sets the stage
for hardening guest CPUID updates in future patches, e.g. allows adding
run-time assertions that the CPUID feature being changed is actually
a bit in the referenced CPUID entry.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Query supported_xcr0 when checking for MPX support instead of invoking
->mpx_supported() and drop ->mpx_supported() as kvm_mpx_supported() was
its last user. Rename vmx_mpx_supported() to cpu_has_vmx_mpx() to
better align with VMX/VMCS nomenclature.
Modify VMX's adjustment of xcr0 to call cpus_has_vmx_mpx() (renamed from
vmx_mpx_supported()) directly to avoid reading supported_xcr0 before
it's fully configured.
No functional change intended.
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
[Test that *all* bits are set. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that the emulation context is dynamically allocated and not embedded
in struct kvm_vcpu, move its header, kvm_emulate.h, out of the public
asm directory and into KVM's private x86 directory.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allocate the emulation context instead of embedding it in struct
kvm_vcpu_arch.
Dynamic allocation provides several benefits:
- Shrinks the size x86 vcpus by ~2.5k bytes, dropping them back below
the PAGE_ALLOC_COSTLY_ORDER threshold.
- Allows for dropping the include of kvm_emulate.h from asm/kvm_host.h
and moving kvm_emulate.h into KVM's private directory.
- Allows a reducing KVM's attack surface by shrinking the amount of
vCPU data that is exposed to usercopy.
- Allows a future patch to disable the emulator entirely, which may or
may not be a realistic endeavor.
Mark the entire struct as valid for usercopy to maintain existing
behavior with respect to hardened usercopy. Future patches can shrink
the usercopy range to cover only what is necessary.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly pass an exception struct when checking for intercept from
the emulator, which eliminates the last reference to arch.emulate_ctxt
in vendor specific code.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename kvm_mmu->get_cr3() to call out that it is retrieving a guest
value, as opposed to kvm_mmu->set_cr3(), which sets a host value, and to
note that it will return something other than CR3 when nested EPT is in
use. Hopefully the new name will also make it more obvious that L1's
nested_cr3 is returned in SVM's nested NPT case.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop kvm_mmu_extended_role.cr4_la57 now that mmu_role doesn't mask off
level, which already incorporates the guest's CR4.LA57 for a shadow MMU
by querying is_la57_mode().
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return true for vmx_interrupt_allowed() if the vCPU is in L2 and L1 has
external interrupt exiting enabled. IRQs are never blocked in hardware
if the CPU is in the guest (L2 from L1's perspective) when IRQs trigger
VM-Exit.
The new check percolates up to kvm_vcpu_ready_for_interrupt_injection()
and thus vcpu_run(), and so KVM will exit to userspace if userspace has
requested an interrupt window (to inject an IRQ into L1).
Remove the @external_intr param from vmx_check_nested_events(), which is
actually an indicator that userspace wants an interrupt window, e.g.
it's named @req_int_win further up the stack. Injecting a VM-Exit into
L1 to try and bounce out to L0 userspace is all kinds of broken and is
no longer necessary.
Remove the hack in nested_vmx_vmexit() that attempted to workaround the
breakage in vmx_check_nested_events() by only filling interrupt info if
there's an actual interrupt pending. The hack actually made things
worse because it caused KVM to _never_ fill interrupt info when the
LAPIC resides in userspace (kvm_cpu_has_interrupt() queries
interrupt.injected, which is always cleared by prepare_vmcs12() before
reaching the hack in nested_vmx_vmexit()).
Fixes: 6550c4df7e ("KVM: nVMX: Fix interrupt window request with "Acknowledge interrupt on exit"")
Cc: stable@vger.kernel.org
Cc: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the vCPU reset and set APIC_BASE MSR path, the apic map will be recalculated
several times, each time it will consume 10+ us observed by ftrace in my
non-overcommit environment since the expensive memory allocate/mutex/rcu etc
operations. This patch optimizes it by recaluating apic map in batch, I hope
this can benefit the serverless scenario which can frequently create/destroy
VMs.
Before patch:
kvm_lapic_reset ~27us
After patch:
kvm_lapic_reset ~14us
Observed by ftrace, improve ~48%.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It could take kvm->mmu_lock for an extended period of time when
enabling dirty log for the first time. The main cost is to clear
all the D-bits of last level SPTEs. This situation can benefit from
manual dirty log protect as well, which can reduce the mmu_lock
time taken. The sequence is like this:
1. Initialize all the bits of the dirty bitmap to 1 when enabling
dirty log for the first time
2. Only write protect the huge pages
3. KVM_GET_DIRTY_LOG returns the dirty bitmap info
4. KVM_CLEAR_DIRTY_LOG will clear D-bit for each of the leaf level
SPTEs gradually in small chunks
Under the Intel(R) Xeon(R) Gold 6152 CPU @ 2.10GHz environment,
I did some tests with a 128G windows VM and counted the time taken
of memory_global_dirty_log_start, here is the numbers:
VM Size Before After optimization
128G 460ms 10ms
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The AVIC does not support guest use of the x2APIC interface. Currently,
KVM simply chooses to squash the x2APIC feature in the guest's CPUID
If the AVIC is enabled. Doing so prevents KVM from running a guest
with greater than 255 vCPUs, as such a guest necessitates the use
of the x2APIC interface.
Instead, inhibit AVIC enablement on a per-VM basis whenever the x2APIC
feature is set in the guest's CPUID.
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the VM allocation and free code to common x86 as the logic is
more or less identical across SVM and VMX.
Note, although hyperv.hv_pa_pg is part of the common kvm->arch, it's
(currently) only allocated by VMX VMs. But, since kfree() plays nice
when passed a NULL pointer, the superfluous call for SVM is harmless
and avoids future churn if SVM gains support for HyperV's direct TLB
flush.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
[Make vm_size a field instead of a function. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the GPA tracking into the emulator context now that the context is
guaranteed to be initialized via __init_emulate_ctxt() prior to
dereferencing gpa_{available,val}, i.e. now that seeing a stale
gpa_available will also trigger a WARN due to an invalid context.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new emulation type flag to explicitly mark emulation related to a
page fault. Move the propation of the GPA into the emulator from the
page fault handler into x86_emulate_instruction, using EMULTYPE_PF as an
indicator that cr2 is valid. Similarly, don't propagate cr2 into the
exception.address when it's *not* valid.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit 5f3d45e7f2 ("kvm/x86: add support for
MONITOR_TRAP_FLAG"), KVM has allowed an L1 guest to use the monitor trap
flag processor-based execution control for its L2 guest. KVM simply
forwards any MTF VM-exits to the L1 guest, which works for normal
instruction execution.
However, when KVM needs to emulate an instruction on the behalf of an L2
guest, the monitor trap flag is not emulated. Add the necessary logic to
kvm_skip_emulated_instruction() to synthesize an MTF VM-exit to L1 upon
instruction emulation for L2.
Fixes: 5f3d45e7f2 ("kvm/x86: add support for MONITOR_TRAP_FLAG")
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Even when APICv is disabled for L1 it can (and, actually, is) still
available for L2, this means we need to always call
vmx_deliver_nested_posted_interrupt() when attempting an interrupt
delivery.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix some typos in the comments. Also fix coding style.
[Sean Christopherson rewrites the comment of write_fault_to_shadow_pgtable
field in struct kvm_vcpu_arch.]
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AMD SVM AVIC accelerates EOI write and does not trap. This causes
in-kernel PIT re-injection mode to fail since it relies on irq-ack
notifier mechanism. So, APICv is activated only when in-kernel PIT
is in discard mode e.g. w/ qemu option:
-global kvm-pit.lost_tick_policy=discard
Also, introduce APICV_INHIBIT_REASON_PIT_REINJ bit to be used for this
reason.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AMD AVIC does not support ExtINT. Therefore, AVIC must be temporary
deactivated and fall back to using legacy interrupt injection via vINTR
and interrupt window.
Also, introduce APICV_INHIBIT_REASON_IRQWIN to be used for this reason.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
[Rename svm_request_update_avic to svm_toggle_avic_for_extint. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since AVIC does not currently work w/ nested virtualization,
deactivate AVIC for the guest if setting CPUID Fn80000001_ECX[SVM]
(i.e. indicate support for SVM, which is needed for nested virtualization).
Also, introduce a new APICV_INHIBIT_REASON_NESTED bit to be used for
this reason.
Suggested-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since disabling APICv has to be done for all vcpus on AMD-based
system, adopt the newly introduced kvm_request_apicv_update()
interface, and introduce a new APICV_INHIBIT_REASON_HYPERV.
Also, remove the kvm_vcpu_deactivate_apicv() since no longer used.
Cc: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AMD SVM AVIC needs to update APIC backing page mapping before changing
APICv mode. Introduce struct kvm_x86_ops.pre_update_apicv_exec_ctrl
function hook to be called prior KVM APICv update request to each vcpu.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Inibit reason bits are used to determine if APICv deactivation is
applicable for a particular hardware virtualization architecture.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Certain runtime conditions require APICv to be temporary deactivated
during runtime. The current implementation only support run-time
deactivation of APICv when Hyper-V SynIC is enabled, which is not
temporary.
In addition, for AMD, when APICv is (de)activated at runtime,
all vcpus in the VM have to operate in the same mode. Thus the
requesting vcpu must notify the others.
So, introduce the following:
* A new KVM_REQ_APICV_UPDATE request bit
* Interfaces to request all vcpus to update APICv status
* A new interface to update APICV-related parameters for each vcpu
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are several reasons in which a VM needs to deactivate APICv
e.g. disable APICv via parameter during module loading, or when
enable Hyper-V SynIC support. Additional inhibit reasons will be
introduced later on when dynamic APICv is supported,
Introduce KVM APICv inhibit reason bits along with a new variable,
apicv_inhibit_reasons, to help keep track of APICv state for each VM,
Initially, the APICV_INHIBIT_REASON_DISABLE bit is used to indicate
the case where APICv is disabled during KVM module load.
(e.g. insmod kvm_amd avic=0 or insmod kvm_intel enable_apicv=0).
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
[Do not use get_enable_apicv; consider irqchip_split in svm.c. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
From Boris Ostrovsky:
The KVM hypervisor may provide a guest with ability to defer remote TLB
flush when the remote VCPU is not running. When this feature is used,
the TLB flush will happen only when the remote VPCU is scheduled to run
again. This will avoid unnecessary (and expensive) IPIs.
Under certain circumstances, when a guest initiates such deferred action,
the hypervisor may miss the request. It is also possible that the guest
may mistakenly assume that it has already marked remote VCPU as needing
a flush when in fact that request had already been processed by the
hypervisor. In both cases this will result in an invalid translation
being present in a vCPU, potentially allowing accesses to memory locations
in that guest's address space that should not be accessible.
Note that only intra-guest memory is vulnerable.
The five patches address both of these problems:
1. The first patch makes sure the hypervisor doesn't accidentally clear
a guest's remote flush request
2. The rest of the patches prevent the race between hypervisor
acknowledging a remote flush request and guest issuing a new one.
Conflicts:
arch/x86/kvm/x86.c [move from kvm_arch_vcpu_free to kvm_arch_vcpu_destroy]
Xiaoyao Li