db_flags field is a bit field. Replace value check with bit flag check.
Link: https://lore.kernel.org/r/20211026115412.27691-12-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently, firmware limits ELS payload to FC frame size/2112. This patch
adjusts memory buffer size to be able to handle max ELS payload.
Link: https://lore.kernel.org/r/20211026115412.27691-11-njavali@marvell.com
Fixes: 84318a9f01 ("scsi: qla2xxx: edif: Add send, receive, and accept for auth_els")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On ipsec start by remote port, target port may use RSCN to trigger
initiator to relogin. If driver is already in the process of a relogin,
then ignore the RSCN and allow the current relogin to continue. This
reduces thrashing of the connection.
Link: https://lore.kernel.org/r/20211026115412.27691-10-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For RSCN of type "Area, Domain, or Fabric", which indicate a portion or
entire fabric was disturbed, current driver does not set the scan_need flag
to indicate a session was affected by the disturbance. This in turn can
lead to I/O timeout and delay of relogin. Hence initiate relogin in the
event of fabric disturbance.
Link: https://lore.kernel.org/r/20211026115412.27691-2-njavali@marvell.com
Fixes: 1560bafdff ("scsi: qla2xxx: Use complete switch scan for RSCN events")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Merge the 5.15/scsi-fixes branch into the staging tree to resolve UFS
conflict reported by sfr.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In dual mode in case of disabling the target, the whole port goes offline
and initiator is turned off too.
Fix restoring initiator mode after disabling target in dual mode.
Link: https://lore.kernel.org/r/20210915153239.8035-1-d.bogdanov@yadro.com
Fixes: 0645cb8350 ("scsi: qla2xxx: Add mode control for each physical port")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
DPC thread gets restricted due to a no-op mailbox, which is a blocking call
and has a high execution frequency. To free up the DPC thread we move no-op
handling to the workqueue. Also, modified qla_do_heartbeat() to send no-op
MBC if we don’t have any active interrupts, but there are still I/Os
outstanding with firmware.
Link: https://lore.kernel.org/r/20210908164622.19240-9-njavali@marvell.com
Fixes: d94d8158e1 ("scsi: qla2xxx: Add heartbeat check")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Authentication application may be running and in the past tried to probe
driver (app_start) but was unsuccessful. This could be due to the bsg layer
not being ready to service the request. On a successful link up, driver
will use the netlink Link Up event to notify the app to retry the app_start
call.
In another case, app does not poll for new NPIV host. This link up event
would notify app of the presence of a new SCSI host.
Link: https://lore.kernel.org/r/20210908164622.19240-6-njavali@marvell.com
Fixes: 4de067e5df ("scsi: qla2xxx: edif: Add N2N support for EDIF")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For target port that register itself as both FCP + NVMe, initiator driver
will try to login one mode at a time. If the last mode did not succeed,
then driver will try the other mode.
When error is encountered, current code only flip to other mode one time
(NVMe->FCP) and remain on the last mode. Driver wrongly assumed target
port does not support PRLI NVMe, instead it was not ready to receive PRLI.
This patch will alternate back and forth on every PRLI failure until login
retry count has depleted or it is succeeded.
Link: https://lore.kernel.org/r/20210817051315.2477-10-njavali@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The abort callback gets called only when it gets posted to firmware. The
refcounting is done properly in the callback. On internal errors, the
callback is not invoked leading to a hung I/O. Fix this by having separate
error code when command gets returned from firmware.
Link: https://lore.kernel.org/r/20210817051315.2477-9-njavali@marvell.com
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently driver saves the personality type (FCP|NVMe) at the start of
first discovery of the remote device. If the remote device personality do
change over time, then qla driver needs to present that to user to decide.
Link: https://lore.kernel.org/r/20210817051315.2477-8-njavali@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For initiator mode, always do secure login when authentication app started.
Also remove redundant flags to indicate secure connection.
Link: https://lore.kernel.org/r/20210817051315.2477-7-njavali@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For EDIF + N2N to work, firmware 9.8 or later is required. The driver will
pause after PLOGI to allow app to authenticate. Once authentication
completes, app will tell driver to do PRLI.
Link: https://lore.kernel.org/r/20210817051315.2477-6-njavali@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Suppress logging of retryable errors. These can still be seen if extended
logging is enabled.
Link: https://lore.kernel.org/r/20210810043720.1137-11-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When user creates multiple NPIVs, the switch capabilities field is checked
before a vport is allowed to be created. This field is being toggled if a
switch scan is in progress. This creates erroneous reject of vport create.
Link: https://lore.kernel.org/r/20210810043720.1137-10-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some FC adapters from Marvell offer the ability to encrypt data in flight
(EDIF). This feature requires an application to act as an authenticator.
After the completion of PLOGI, both sides have authenticated and PRLI
completed, encrypted I/Os are allowed to proceed.
- Use new firmware API to encrypt traffic on the wire
- Add driver parameter to enable|disable EDIF feature
# modprobe qla2xxx ql2xsecenable=1
Link: https://lore.kernel.org/r/20210624052606.21613-10-njavali@marvell.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com>
Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com>
Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some FC adapters from Marvell offer the ability to encrypt data in flight
(EDIF). This feature requires an application to act as an authenticator.
During runtime, driver and authentication application need to stay in sync
in terms of: Session being down|up, arrival of new authentication
message (AUTH ELS) and SADB update completion.
These events are queued up as doorbell to the authentication
application. Application would read this doorbell on regular basis to stay
up to date. Each SCSI host would have a separate doorbell queue.
The doorbell interface can daisy chain a list of events for each read. Each
event contains an event code + hint to help application steer the next
course of action.
Link: https://lore.kernel.org/r/20210624052606.21613-9-njavali@marvell.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com>
Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com>
Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some FC adapters from Marvell offer the ability to encrypt data in flight
(EDIF). This feature requires an application to act as an authenticator.
There is no FC switch scan service that can indicate whether a device is
secure or non-secure.
In order to detect whether the remote port supports encrypted operation,
driver must first do a PLOGI with the remote device. On completion of the
PLOGI, driver will query firmware to see if the device supports secure
login. To do that, driver + firmware must advertise the security bit via
PLOGI's service parameter. The remote device shall respond using the same
service parameter whether it supports it or not.
Link: https://lore.kernel.org/r/20210624052606.21613-8-njavali@marvell.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com>
Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com>
Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some FC adapters from Marvell offer the ability to encrypt data in flight
(EDIF). This feature requires an application to act as an authenticator.
On completion of the authentication process, the authentication application
will notify driver on whether it is successful or not.
In case of success, application will use the QL_VND_SC_AUTH_OK BSG call to
tell driver to proceed to the PRLI phase.
In case of failure, application will use the QL_VND_SC_AUTH_FAIL bsg call
to tell driver to tear down the connection and retry. In the case where an
existing session is active, the re-key process can fail. The session tear
down ensures data is not further compromised.
Link: https://lore.kernel.org/r/20210624052606.21613-7-njavali@marvell.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com>
Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com>
Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some FC adapters from Marvell offer the ability to encrypt data in flight
(EDIF). This feature requires an application to act as an authenticator.
As part of the authentication process, the authentication application will
generate a SADB entry (Security Association/SA, key, SPI value, etc). This
SADB is then passed to driver to be programmed into hardware. There will be
a pair of SADB's (Tx and Rx) for each connection.
After some period, the application can choose to change the key. At that
time, a new set of SADB pair is given to driver. The old set of SADB will
be deleted.
Add a new bsg call (QL_VND_SC_SA_UPDATE) to allow application to allow
adding or deleting SADB entries. Driver will not keep the key in
memory. It will pass it to HW.
It is assumed that application will assign a unique SPI value to this SADB
(SA + key). Driver + hardware will assign a handle to track this unique
SPI/SADB.
Link: https://lore.kernel.org/r/20210624052606.21613-6-njavali@marvell.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com>
Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com>
Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use "no-op" mailbox command to check if the adapter firmware is still
responsive.
Link: https://lore.kernel.org/r/20210619052427.6440-1-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Variable rval is set to QLA_SUCCESS but this value is never read as it is
overwritten later on. Hence it is a redundant assignment and can be
removed.
Clean up the following clang-analyzer warning:
drivers/scsi/qla2xxx/qla_init.c:4359:2: warning: Value stored to 'rval'
is never read [clang-analyzer-deadcode.DeadStores].
Link: https://lore.kernel.org/r/1620643206-127930-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In a case when the initiator in P2P mode by some circumstances does not
send PRLI, the target, in a case when the target port's WWPN is less than
initiator's, changes the discovery state in DSC_GNL. When gnl completes it
sends PRLI to the initiator.
Usually the initiator in P2P mode always sends PRLI. We caught this issue
on Linux stable v5.4.6 https://www.spinics.net/lists/stable/msg458515.html.
Fix this particular corner case in the behaviour of the P2P mod target
login state machine.
Link: https://lore.kernel.org/r/20210422153414.4022-1-a.kovaleva@yadro.com
Fixes: a9ed06d4e6 ("scsi: qla2xxx: Allow PLOGI in target mode")
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Anastasia Kovaleva <a.kovaleva@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After RISC RESET, the poll time for completion is too short. Fix the
completion polling time.
Link: https://lore.kernel.org/r/20210329085229.4367-8-njavali@marvell.com
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Session was stuck due to explicit logout to target timing out. The target
was in an unresponsive state. This timeout induced an error to the GNL
command from moving forward.
Link: https://lore.kernel.org/r/20210329085229.4367-4-njavali@marvell.com
Tested-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The host:channel:scsi_target_id information is helpful in matching an FC
port with a SCSI device, so add it. For initiator FC ports, a -1 would be
displayed for "target" part.
Link: https://lore.kernel.org/r/20210329085229.4367-3-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix below warnings reported by coccicheck:
./drivers/scsi/qla2xxx/qla_init.c:3371:2-7: WARNING: NULL check before
some freeing functions is not needed.
./drivers/scsi/qla2xxx/qla_init.c:7855:5-10: WARNING: NULL check before
some freeing functions is not needed.
./drivers/scsi/qla2xxx/qla_init.c:7916:2-7: WARNING: NULL check before
some freeing functions is not needed.
./drivers/scsi/qla2xxx/qla_init.c:8113:4-18: WARNING: NULL check before
some freeing functions is not needed.
./drivers/scsi/qla2xxx/qla_init.c:8174:2-7: WARNING: NULL check before
some freeing functions is not needed.
Link: https://lore.kernel.org/r/1611306174-92627-1-git-send-email-abaci-bugfix@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Yang Li <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This change will aid in debugging issues arising because of dropped frame,
DIF errors, queue full etc where debug level is not set.
Link: https://lore.kernel.org/r/20210111093134.1206-4-njavali@marvell.com
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This statistics will help in debugging process and checking specific error
counts. It also provides a capability to isolate the port or bring it out
of isolation.
Link: https://lore.kernel.org/r/20210111093134.1206-2-njavali@marvell.com
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Due to a bug in the older scan logic, when a once lost device re-appeared,
it was not discovered. Fix this by resetting login_retry counter upon
device discovery.
This is applicable only for 4G and older HBAs.
Link: https://lore.kernel.org/r/20201202132312.19966-15-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
FC-NVMe target discovery failed when initiator wwpn < target wwpn in an N2N
(Direct Attach) config, where the driver was stuck on FCP PRLI mode and
failed to retry with NVMe PRLI.
Link: https://lore.kernel.org/r/20201202132312.19966-10-njavali@marvell.com
Fixes: 84ed362ac4 ("scsi: qla2xxx: Dual FCP-NVMe target port support”)
Fixes: 983f127603 ("scsi: qla2xxx: Retry PLOGI on FC-NVMe PRLI failure”)
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Except for debug output in the shutdown path, tcm_qla2xxx is the only
driver using the se_session sess_cmd_list. Move the list to that driver to
facilitate removing the sess_cmd_lock from the main I/O path for the rest
of the drivers.
Link: https://lore.kernel.org/r/1604257174-4524-6-git-send-email-michael.christie@oracle.com
Cc: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Here are some SPDX-specific changes for 5.10-rc1.
They include:
- driver fixes to make spdxcheck.pl work properly
- add GFDL licenses as "deprecated" but required due to some of
our documentation using them
- add Zlib license as "deprecated" but required because we have
code with this license in the tree.
- convert some drivers to have SPDX identifiers that previously
didn't have them.
All have been in linux-next for a very long time with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX4c6oA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl35ACg2i+pP5CBExSzQUtA1Tx/UD2CVNMAoIAQChwj
SHZurDuyHkEiCdB+5n1u
=C9qR
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here are some SPDX-specific changes for 5.10-rc1.
They include:
- driver fixes to make spdxcheck.pl work properly
- add GFDL licenses as "deprecated" but required due to some of our
documentation using them
- add Zlib license as "deprecated" but required because we have code
with this license in the tree.
- convert some drivers to have SPDX identifiers that previously
didn't have them.
All have been in linux-next for a very long time with no reported
issues"
* tag 'spdx-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
scripts/spdxcheck.py: handle license identifiers in XML comments
net/mlx5: IPsec: make spdxcheck.py happy
LICENSES/deprecated: add Zlib license text
LICENSE: add GFDL deprecated licenses
net/qla3xxx: Convert to SPDX license identifiers
net/qlge: Convert to SPDX license identifiers
net/qlcnic: Convert to SPDX license identifiers
scsi/qla2xxx: Convert to SPDX license identifiers
scsi/qla4xxx: Convert to SPDX license identifiers
This series consists of the usual driver updates (ufs, qla2xxx, tcmu,
ibmvfc, lpfc, smartpqi, hisi_sas, qedi, qedf, mpt3sas) and minor bug
fixes. There are only three core changes: adding sense codes,
cleaning up noretry and adding an option for limitless retries.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX4YulyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishaZDAQCT7rwG
UEZYHgYkU9EX9ERVBQM0SW4mLrxf3g3P5ioJsAEAtkclCM4QsIOP+MIPjIa0EyUY
khu0kcrmeFR2YwA8zhw=
=4w4S
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"The usual driver updates (ufs, qla2xxx, tcmu, ibmvfc, lpfc, smartpqi,
hisi_sas, qedi, qedf, mpt3sas) and minor bug fixes.
There are only three core changes: adding sense codes, cleaning up
noretry and adding an option for limitless retries"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (226 commits)
scsi: hisi_sas: Recover PHY state according to the status before reset
scsi: hisi_sas: Filter out new PHY up events during suspend
scsi: hisi_sas: Add device link between SCSI devices and hisi_hba
scsi: hisi_sas: Add check for methods _PS0 and _PR0
scsi: hisi_sas: Add controller runtime PM support for v3 hw
scsi: hisi_sas: Switch to new framework to support suspend and resume
scsi: hisi_sas: Use hisi_hba->cq_nvecs for calling calling synchronize_irq()
scsi: qedf: Remove redundant assignment to variable 'rc'
scsi: lpfc: Remove unneeded variable 'status' in lpfc_fcp_cpu_map_store()
scsi: snic: Convert to use DEFINE_SEQ_ATTRIBUTE macro
scsi: qla4xxx: Delete unneeded variable 'status' in qla4xxx_process_ddb_changed
scsi: sun_esp: Use module_platform_driver to simplify the code
scsi: sun3x_esp: Use module_platform_driver to simplify the code
scsi: sni_53c710: Use module_platform_driver to simplify the code
scsi: qlogicpti: Use module_platform_driver to simplify the code
scsi: mac_esp: Use module_platform_driver to simplify the code
scsi: jazz_esp: Use module_platform_driver to simplify the code
scsi: mvumi: Fix error return in mvumi_io_attach()
scsi: lpfc: Drop nodelist reference on error in lpfc_gen_req()
scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs()
...
Normally, the MPI firmware is reset when an MPI dump is collected. If an
unsaved MPI dump exists in the driver, though, an alternate mechanism is
used. This mechanism, which was not fully correct, is not recommended and
instead an MPI dump template walk is suggested to perform the MPI reset.
To allow for the MPI dump template walk, extra space is reserved in the MPI
dump buffer which gets used only when there is already an MPI dump in
place.
Link: https://lore.kernel.org/r/20200929102152.32278-5-njavali@marvell.com
Fixes: cbb01c2f2f ("scsi: qla2xxx: Fix MPI failure AEN (8200) handling")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Current code uses wrong mailbox option to extract bbc from firmware. This
field is nested inside of PLOGI payload. Extract bbc from PLOGI template
payload.
Link: https://lore.kernel.org/r/20200929102152.32278-3-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch tracks number of IOCB resources used in the I/O fast path. If
the number of used IOCBs reach a high water limit, driver would return the
I/O as busy and let upper layer retry. This prevents over subscription of
IOCB resources where any future error recovery command is unable to cut
through. Enable IOCB throttling by default.
Link: https://lore.kernel.org/r/20200904045128.23631-12-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Create a base for adding remote port related entries in debugfs.
Link: https://lore.kernel.org/r/20200904045128.23631-3-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
All files in this driver directory contain the following notice:
See LICENSE.qla2xxx for copyright and licensing details.
LICENSE.qla2xxx can be found in Documentation/scsi/. The file contains:
- A copyright notice
This copyright notice is redundant as all files contain the same
copyright notice already
- A license notice
You may modify and redistribute the device driver code under the
GNU General Public License (a copy of which is attached hereto as
Exhibit A) published by the Free Software Foundation (version 2).
This can be replaced with the corresponding SPDX license identifier
(GPL-2.0-only) in the source files which reference this license
file.
- The full GPLv2 license text
A redundant copy of LICENSES/preferred/GPL-2.0
Remove the notices and add the SPDX license identifier GPL-2.0-only to the
source files.
Finally remove the now redundant LICENSE.qla2xxx file.
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Acked-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This addresses the following coccinelle warning:
drivers/scsi/qla2xxx/qla_init.c:7112:5-9: Unneeded variable: "rval".
Return "QLA_SUCCESS" on line 7115
Link: https://lore.kernel.org/r/20200911091021.2937708-1-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Emit a warning when ->done or ->free are called on an already freed
srb. There is a hidden use-after-free bug in the driver which corrupts
the srb memory pool which originates from the cleanup callbacks.
An extensive search didn't bring any lights on the real problem. The
initial fix was to set both pointers to NULL and try to catch invalid
accesses. But instead the memory corruption was gone and the driver
didn't crash. Since not all calling places check for NULL pointer, add
explicitly default handlers. With this we workaround the memory
corruption and add a debug help.
Link: https://lore.kernel.org/r/20200908081516.8561-2-dwagner@suse.de
Reviewed-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Eleven fixes, mostly in drivers or minor fixes in driver related
infrastructure libraries (target, libfc and libsas). Most of the bugs
fixed only show up under rare circumstances, the exception being the
endianness problem in qla2xxx which is used as a device on some sparc
systems.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX1egVyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishShgAP9McHKn
9T/m2mAjBr8IMZRlD4Y6nC+ToxDdRDsYT6iAOQD/ZO1FajxEcGC4xEtWznvXtqGk
H1Lfr/ta19GSEPqaZ44=
=rDo9
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Eleven fixes, mostly in drivers or minor fixes in driver related
infrastructure libraries (target, libfc and libsas).
Most of the bugs fixed only show up under rare circumstances, the
exception being the endianness problem in qla2xxx which is used as a
device on some sparc systems"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mpt3sas: Don't call disable_irq from IRQ poll handler
scsi: megaraid_sas: Don't call disable_irq from process IRQ poll
scsi: target: iscsi: Fix hang in iscsit_access_np() when getting tpg->np_login_sem
scsi: libsas: Set data_dir as DMA_NONE if libata marks qc as NODATA
scsi: target: iscsi: Fix data digest calculation
scsi: lpfc: Update lpfc version to 12.8.0.4
scsi: lpfc: Extend the RDF FPIN Registration descriptor for additional events
scsi: lpfc: Fix FLOGI/PLOGI receive race condition in pt2pt discovery
scsi: lpfc: Fix setting IRQ affinity with an empty CPU mask
scsi: qla2xxx: Fix regression on sparc64
scsi: libfc: Fix for double free()
scsi: pm8001: Fix memleak in pm8001_exec_internal_task_abort
