This patch slightly changes need_do_checkpoint to return the detail
info that indicates why we need do checkpoint, then caller could print
it with trace message.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Without FADVISE_KEEP_SIZE_BIT, we will try to recover file size
according to last non-hole block, so in fallocate(), we must set
FADVISE_KEEP_SIZE_BIT flag once we have preallocated block cross
EOF, instead of when all preallocation is success. Otherwise, file
size will be incorrect due to lack of this flag.
Simple testcase to reproduce this:
1. echo 2 > /sys/fs/f2fs/<device>/inject_type
2. echo 10 > /sys/fs/f2fs/<device>/inject_rate
3. run tests/generic/392
4. disable fault injection
5. do remount
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
During block exchange in {insert,collapse,move}_range, page-block mapping
is unstable due to mapping moving or recovery, so there should be no
concurrent cache read operation rely on such mapping, nor cache write
operation to mess up block exchange.
So this patch let background GC be aware of that.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Use a slightly easier way to calculate last_nid.
Signed-off-by: Fan li <fanofcode.li@samsung.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Sometimes, after running generic/270 of fstest, fsck reports summary
info and actual position of block address in direct node becoming
inconsistent.
The root cause is race in between __f2fs_replace_block and change_curseg
as below:
Thread A Thread B
- __clone_blkaddrs
- f2fs_replace_block
- __f2fs_replace_block
- segnoA = GET_SEGNO(sbi, blkaddrA);
- type = se->type:=CURSEG_HOT_DATA
- if (!IS_CURSEG(sbi, segnoA))
type = CURSEG_WARM_DATA
- allocate_data_block
- allocate_segment
- get_ssr_segment
- change_curseg(segnoA, CURSEG_HOT_DATA)
- change_curseg(segnoA, CURSEG_WARM_DATA)
- reset_curseg
- __set_sit_entry_type
- change se->type from CURSEG_HOT_DATA to CURSEG_WARM_DATA
So finally, hot curseg locates in segnoA, but type of segnoA becomes
CURSEG_WARM_DATA.
Then if we invoke __f2fs_replace_block(blkaddrB, blkaddrA, true, false),
as blkaddrA locates in segnoA, so we will move warm type curseg to segnoA,
then change its summary cache and writeback it to summary block.
But segnoA is used by hot type curseg too, once it moves or persist, it
will cover summary block content with inner old summary cache, result in
inconsistent status.
This patch tries to fix this issue by introduce global curseg lock to avoid
race in between __f2fs_replace_block and change_curseg.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
After commit a468f0ef51 ("f2fs: use crc and cp version to determine
roll-forward recovery"), last caller of update_meta_page passing @src
with NULL is gone, so remove related dead code there.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs does not set the SB_I_VERSION flag, so the i_version will never
be incremented on write. It was recently changed to increment the
i_version on a quota write, which isn't necessary here.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When we are closing to trigger foreground GC, if there are only a few
of dirty metas, we can log these dirty metas in left space of opened
segments instead of triggering foreground GC.
With this patch, total count of foreground GC triggered by
test/generic/* of fstest suit reduce from 254 to 184.
So let's do the check before foreground GC anyway.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There are some cases user didn't update SIT cache under this lock,
so let's use rw_semaphore instead of mutex to enhance concurrently
accessing.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch supports hidden quota files in the system, which will be used for
Android. It requires up-to-date f2fs-tools later than v1.9.0.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds quota_ino feature infra to be used for quota files.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Make three modification for __update_nat_bits:
1. Take the codes of dealing the nat with nid 0 out of the loop
Such nat only needs to be dealt with once at beginning.
2. Use " nat_index == 0" instead of " start_nid == 0" to decide if it's the first nat block
It's better that we don't assume @start_nid is the first nid of the nat block it's in.
3. Use " if (nat_blk->entries[i].block_addr != NULL_ADDR)" to explicitly comfirm the value of block_addr
use constant to make sure the codes is right, even if the value of NULL_ADDR changes.
Signed-off-by: Fan li <fanofcode.li@samsung.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
modify for accurate fggc node io stat
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This reverts commit 5e443818fa
The commit should be reverted because call sequence of below two parts
of code must be kept:
a. update sit information, it needs to be updated before segment
allocation since latter allocation may trigger SSR, and SSR allocation
needs latest valid block information of all segments.
b. update segment status, it needs to be updated after segment allocation
since we can skip updating current opened segment status.
Fixes: 5e443818fa ("f2fs: handle dirty segments inside refresh_sit_entry")
Suggested-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: remove refresh_sit_entry function]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch add a new function to move nid from one state to another.
Move operation is heavily used, by adding a new function for it
we can cut down some branches from several flow.
Signed-off-by: Fan li <fanofcode.li@samsung.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch exports min_ssr_segments threshold in sysfs to let user
control triggering SSR allocation flexibly.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We have supported to issue discard in specified range during fstrim,
it needs to return caller with successfully trimmed bytes in that
range instead of bytes of invalid blocks which are scanned in
checkpoint.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds to support bio allocation error injection to simulate
out-of-memory test scenario.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds to support get_page error injection to simulate
out-of-memory test scenario.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It supports to extend reserved_blocks sysfs interface to be soft
threshold, which allows user configure it exceeding current available
user space. This patch also introduces a new sysfs interface called
current_reserved_blocks, which shows the current blocks that have
already been reserved.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes recovering incomplete xattr entries remaining in inline xattr
and xattr block, caused by any kind of errors.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Now, in product, more and more features based on file encryption were
introduced, their demand of xattr space is increasing, however, inline
xattr has fixed-size of 200 bytes, once inline xattr space is full, new
increased xattr data would occupy additional xattr block which may bring
us more space usage and performance regression during persisting.
In order to resolve above issue, it's better to expand inline xattr size
flexibly according to user's requirement.
So this patch introduces new filesystem feature 'flexible inline xattr',
and new mount option 'inline_xattr_size=%u', once mkfs enables the
feature, we can use the option to make f2fs supporting flexible inline
xattr size.
To support this feature, we add extra attribute i_inline_xattr_size in
inode layout, indicating that how many space inline xattr borrows from
block address mapping space in inode layout, by this, we can easily
locate and store flexible-sized inline xattr data in inode.
Inode disk layout:
+----------------------+
| .i_mode |
| ... |
| .i_ext |
+----------------------+
| .i_extra_isize |
| .i_inline_xattr_size |-----------+
| ... | |
+----------------------+ |
| .i_addr | |
| - block address or | |
| - inline data | |
+----------------------+<---+ v
| inline xattr | +---inline xattr range
+----------------------+<---+
| .i_nid |
+----------------------+
| node_footer |
| (nid, ino, offset) |
+----------------------+
Note that, we have to cnosider backward compatibility which reserved
inline_data space, 200 bytes, all the time, reported by Sheng Yong.
Previous inline data or directory always reserved 200 bytes in inode layout,
even if inline_xattr is disabled. In order to keep inline_dentry's structure
for backward compatibility, we get the space back only from inline_data.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Reported-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds to call quota_intialize in f2fs_set_acl, f2fs_unlink,
and f2fs_rename.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds one sysfs entry to show # of dirty segments which can be
used for gc timing by user.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch replaces to use cp_error flag instead of RDONLY for quota off.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are several assignments to variables that are redundant
as the values are never read when the variables are updated later
and so the redundant statements can be safely removed.
Cleans up clang warnings:
fs/f2fs/segment.c:923:19: warning: Value stored to 'p' during its initialization is never read
fs/f2fs/segment.c:2060:2: warning: Value stored to 'hint' is never read
fs/f2fs/segment.c:2353:2: warning: Value stored to 'start_block' is never read
fs/f2fs/segment.c:2354:2: warning: Value stored to 'end_block' is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
All uses of timespec are deprecated, and this one is not particularly
useful, as the documented method for converting seconds to jiffies
is to multiply by 'HZ'.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There may be extreme case as below:
For one section contains one segment, and there are total 100 segments
with 10% over-privision ratio in f2fs partition, fggc_threshold will
be rounded down to 460 instead of 460.8 as below caclulation:
sbi->fggc_threshold = div_u64((u64)(main_count - ovp_count) *
BLKS_PER_SEC(sbi), (main_count - resv_count));
If section usage is as:
60 segments which contain 460 valid blocks
40 segments which contain 462 valid blocks
As valid block number in all sections is large than fggc_threshold, so
none of them will be chosen as candidate due to incorrect fggc_threshold.
Let's just soften the term of choosing foreground GC candidates.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This reverts commit 4f31d26b0c.
It turns out that we need to report error number if nothing was written.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch removes obosolete parameter for truncate_xattr_node.
Suggested-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If some abnormal users try lots of atomic write operations, f2fs is able to
produce pinned pages in the main memory which affects system performance.
This patch limits that as 20% over total memory size, and if f2fs reaches
to the limit, it will drop all the inmemory pages.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes to update ctx->pos correctly when hitting hole in
directory.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, for large directory, we just do readahead only once in
readdir(), readdir()'s performance may drop when traversing latter
blocks. In order to avoid this, relocate readahead codes to covering
all traverse flow.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch follows ext4 to allow readdir() in large empty directory to
be interrupted. Referenced commit of ext4: 1f60fbe727 ("ext4: allow
readdir()'s of large empty directories to be interrupted").
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Let's skip entire non-exist area to speed up truncate_hole by
using get_next_page_offset.
Signed-off-by: Weichao Guo <guoweichao@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If there's some data written through inline data or dentry, we need to shouw
st_blocks. This fixes reporting zero blocks even though there is small written
data.
Cc: stable@vger.kernel.org
Reviewed-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: avoid link file for quotacheck]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When doing fault injection test, f2fs_evict_inode() didn't remove gdirty_list
which incurs a kernel panic due to wrong pointer access.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch avoids dropping crypto key in f2fs_drop_inode, so we can guarantee
it happens only at evict_inode.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
last_disk_size could be wrong due to concurrently updating, so using
i_sem semaphore to make last_disk_size updating exclusive to fix this
issue.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Bool initializations should use true and false. Bool tests don't need
comparisons.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In ->umount, once we drop remained discard entries, we should not
set CP_TRIMMED_FLAG with another checkpoint.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
__submit_discard_cmd may lead long latency due to exhaustion of I/O
request resource in block layer, so issuing all discard under cmd_lock
may lead to hangtask, in order to avoid that, let's reduce it's coverage.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There are many different scenarios such as fstrim, umount, urgent or
background where we will issue discards, actually, they need use
different policy in aspect of io aware, discard granularity, delay
interval and so on. But now they just share one common discard policy,
so there will be race when changing policy in between these scenarios,
the interference of changing discard policy will be very serious.
This patch changes to split discard policy for different scenarios.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch wraps scattered optional parameters into discard policy as
below, later, with it we expect that we can adjust these parameters with
proper strategy in different scenario.
struct discard_policy {
unsigned int min_interval; /* used for candidates exist */
unsigned int max_interval; /* used for candidates not exist */
unsigned int max_requests; /* # of discards issued per round */
unsigned int io_aware_gran; /* minimum granularity discard not be aware of I/O */
bool io_aware; /* issue discard in idle time */
bool sync; /* submit discard with REQ_SYNC flag */
};
This patch doesn't change any logic of codes.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Fstrim intends to trim invalid blocks of filesystem only with specified
range and granularity, but actually, it will issue all previous cached
discard commands which may be out-of-range and be with unmatched
granularity, it's unneeded.
In order to fix above issues, this patch introduces new helps to support
to issue and wait discard in range and adds a new fstrim_list for tracking
in-flight discard from ->fstrim.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In the case where a filesystem has been configured without encryption
support, there is no longer any need to initialize ->s_cop at all, since
none of the methods are ever called.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now that all callers of fscrypt_operations.is_encrypted() have been
switched to IS_ENCRYPTED(), remove ->is_encrypted().
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Introduce a flag S_ENCRYPTED which can be set in ->i_flags to indicate
that the inode is encrypted using the fscrypt (fs/crypto/) mechanism.
Checking this flag will give the same information that
inode->i_sb->s_cop->is_encrypted(inode) currently does, but will be more
efficient. This will be useful for adding higher-level helper functions
for filesystems to use. For example we'll be able to replace this:
if (ext4_encrypted_inode(inode)) {
ret = fscrypt_get_encryption_info(inode);
if (ret)
return ret;
if (!fscrypt_has_encryption_key(inode))
return -ENOKEY;
}
with this:
ret = fscrypt_require_key(inode);
if (ret)
return ret;
... since we'll be able to retain the fast path for unencrypted files as
a single flag check, using an inline function. This wasn't possible
before because we'd have had to frequently call through the
->i_sb->s_cop->is_encrypted function pointer, even when the encryption
support was disabled or not being used.
Note: we don't define S_ENCRYPTED to 0 if CONFIG_FS_ENCRYPTION is
disabled because we want to continue to return an error if an encrypted
file is accessed without encryption support, rather than pretending that
it is unencrypted.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Filesystems have to include different header files based on whether they
are compiled with encryption support or not. That's nasty and messy.
Instead, rationalise the headers so we have a single include fscrypt.h
and let it decide what internal implementation to include based on the
__FS_HAS_ENCRYPTION define. Filesystems set __FS_HAS_ENCRYPTION to 1
before including linux/fscrypt.h if they are built with encryption
support. Otherwise, they must set __FS_HAS_ENCRYPTION to 0.
Add guards to prevent fscrypt_supp.h and fscrypt_notsupp.h from being
directly included by filesystems.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
[EB: use 1 and 0 rather than defined/undefined]
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If f2fs manages multiple devices, in checkpoint, we need to issue flush
in those devices which contain dirty data/node in their cache before
we write checkpoint region, otherwise, filesystem metadata could be
corrupted if hitting SPO after checkpoint.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When multiple device feature is enabled, during ->fsync we will issue
flush in all devices to make sure node/data of the file being persisted
into storage. But some flushes of device could be unneeded as file's
data may be not writebacked into those devices. So this patch adds and
manage bitmap per inode in global cache to indicate which device is
dirty and it needs to issue flush during ->fsync, hence, we could improve
performance of fsync in scenario of multiple device.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It needs to stat size of ino management cache with all type instead of
orphan ino type.
Fixes: 652be55162 ("f2fs: show # of orphan inodes")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If we failed to issue flush in ->fsync, we need to keep FI_UPDATE_WRITE
flag to make sure triggering flush in next ->fsync.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Fan Li reported, there is no user traversing nid_list[ALLOC_NID_LIST]
which is used for tracking preallocated nids. Let's drop it, and only
track preallocated nids in free_nid_root radix-tree.
Reported-by: Fan Li <fanofcode.li@samsung.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In FI_NO_PREALLOC cases, direct I/O path may allocate blocks for an
inode but keep its inline data flag. This inconsistency may trigger
vfs clear_inode nrpages bug_on when evicting the inode. We should
convert inline data first in this case.
Signed-off-by: Weichao Guo <guoweichao@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Keep in line with the other Linux file system implementations
since page_cache_sync_readahead supports NULL file pointer,
and thus we can readahead data by f2fs itself without file opening
(something like the btrfs behavior).
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Commit ba38c27eb9 ("f2fs: enhance lookup xattr") introduces
lookup_all_xattrs duplicating from read_all_xattrs, which leaves
lots of similar codes in between them, so introduce new help
read_xattr_block to clean up redundant codes.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Commit ba38c27eb9 ("f2fs: enhance lookup xattr") introduces
lookup_all_xattrs duplicating from read_all_xattrs, which leaves
lots of similar codes in between them, so introduce new help
read_inline_xattr to clean up redundant codes.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Commit 2683446646 ("f2fs: reuse nids more aggressively") tries to
reuse nids as many as possilbe, in order to mitigate producing obsolete
node pages in page cache.
But acutally, before we reuse the nids and related node page cache,
we will always invalidate that node page, so there will be not any
obsolete node pages in cache.
Let's just revert previous commit, so that nm_i::next_scan_nid can be
increased ascendingly, making __build_free_nids traverses all NAT pages
more easily, finally, free nid bitmap cache can be enabled as soon as
possible.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This reverts commit b9cd20619e.
That patch causes much fewer node segments (which can be used for SSR)
than before, and in the corner case (e.g. create and delete *.txt files in
one same directory, there will be very few node segments but many data
segments), if the reserved free segments are all used up during gc, then
the write_checkpoint can still flush dentry pages to data ssr segments,
but will probably fail to flush node pages to node ssr segments, since
there are not enough node ssr segments left (the left ones are all
full).
So revert this patch to give a fair chance to let node segments remain
for SSR, which provides more robustness for corner cases.
Conflicts:
fs/f2fs/gc.c
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Ju Hyung Park reported:
"When 'fstrim' is called for manual trim, a BUG() can be triggered
randomly with this patch.
I'm seeing this issue on both x86 Desktop and arm64 Android phone.
On x86 Desktop, this was caused during Ubuntu boot-up. I have a
cronjob installed which calls 'fstrim -v /' during boot. On arm64
Android, this was caused during GC looping with 1ms gc_min_sleep_time
& gc_max_sleep_time."
Root cause of this issue is that f2fs_wait_discard_bios can only be
used by f2fs_put_super, because during put_super there must be no
other referrers, so it can ignore discard entry's reference count
when removing the entry, otherwise in other caller we will hit bug_on
in __remove_discard_cmd as there may be other issuer added reference
count in discard entry.
Thread A Thread B
- issue_discard_thread
- f2fs_ioc_fitrim
- f2fs_trim_fs
- f2fs_wait_discard_bios
- __issue_discard_cmd
- __submit_discard_cmd
- __wait_discard_cmd
- dc->ref++
- __wait_one_discard_bio
- __wait_discard_cmd
- __remove_discard_cmd
- f2fs_bug_on(sbi, dc->ref)
Fixes: 969d1b180d
Reported-by: Ju Hyung Park <qkrwngud825@gmail.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In this round, we've mostly tuned f2fs to provide better user experience
for Android. Especially, we've worked on atomic write feature again with
SQLite community in order to support it officially. And we added or modified
several facilities to analyze and enhance IO behaviors.
Major changes include:
- add app/fs io stat
- add inode checksum feature
- support project/journalled quota
- enhance atomic write with new ioctl() which exposes feature set
- enhance background gc/discard/fstrim flows with new gc_urgent mode
- add F2FS_IOC_FS{GET,SET}XATTR
- fix some quota flows
-----BEGIN PGP SIGNATURE-----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=w4KH
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've mostly tuned f2fs to provide better user
experience for Android. Especially, we've worked on atomic write
feature again with SQLite community in order to support it officially.
And we added or modified several facilities to analyze and enhance IO
behaviors.
Major changes include:
- add app/fs io stat
- add inode checksum feature
- support project/journalled quota
- enhance atomic write with new ioctl() which exposes feature set
- enhance background gc/discard/fstrim flows with new gc_urgent mode
- add F2FS_IOC_FS{GET,SET}XATTR
- fix some quota flows"
* tag 'f2fs-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (63 commits)
f2fs: hurry up to issue discard after io interruption
f2fs: fix to show correct discard_granularity in sysfs
f2fs: detect dirty inode in evict_inode
f2fs: clear radix tree dirty tag of pages whose dirty flag is cleared
f2fs: speed up gc_urgent mode with SSR
f2fs: better to wait for fstrim completion
f2fs: avoid race in between read xattr & write xattr
f2fs: make get_lock_data_page to handle encrypted inode
f2fs: use generic terms used for encrypted block management
f2fs: introduce f2fs_encrypted_file for clean-up
Revert "f2fs: add a new function get_ssr_cost"
f2fs: constify super_operations
f2fs: fix to wake up all sleeping flusher
f2fs: avoid race in between atomic_read & atomic_inc
f2fs: remove unneeded parameter of change_curseg
f2fs: update i_flags correctly
f2fs: don't check inode's checksum if it was dirtied or writebacked
f2fs: don't need to update inode checksum for recovery
f2fs: trigger fdatasync for non-atomic_write file
f2fs: fix to avoid race in between aio and gc
...
Once we encounter I/O interruption during issuing discards, we will delay
long time before next round, but if system status is I/O idle during the
time, it may loses opportunity to issue discards. So this patch changes
to hurry up to issue discard after io interruption.
Besides, this patch also fixes to issue discards accurately with assigned
rate.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Add a bugon in f2fs_evict_inode to detect inconsistent status between
inode cache and related node page cache.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
On a senario like writing out the first dirty page of the inode
as the inline data, we only cleared dirty flags of the pages, but
didn't clear the dirty tags of those pages in the radix tree.
If we don't clear the dirty tags of the pages in the radix tree, the
inodes which contain the pages will be marked with I_DIRTY_PAGES again
and again, and writepages() for the inodes will be invoked in every
writeback period. As a result, nothing will be done in every
writepages() for the inodes and it will just consume CPU time
meaninglessly.
Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In android, we'd better wait for fstrim completion instead of issuing the
discard commands asynchronous.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Introduce a new migration mode that allow to offload the copy to a device
DMA engine. This changes the workflow of migration and not all
address_space migratepage callback can support this.
This is intended to be use by migrate_vma() which itself is use for thing
like HMM (see include/linux/hmm.h).
No additional per-filesystem migratepage testing is needed. I disables
MIGRATE_SYNC_NO_COPY in all problematic migratepage() callback and i
added comment in those to explain why (part of this patch). The commit
message is unclear it should say that any callback that wish to support
this new mode need to be aware of the difference in the migration flow
from other mode.
Some of these callbacks do extra locking while copying (aio, zsmalloc,
balloon, ...) and for DMA to be effective you want to copy multiple
pages in one DMA operations. But in the problematic case you can not
easily hold the extra lock accross multiple call to this callback.
Usual flow is:
For each page {
1 - lock page
2 - call migratepage() callback
3 - (extra locking in some migratepage() callback)
4 - migrate page state (freeze refcount, update page cache, buffer
head, ...)
5 - copy page
6 - (unlock any extra lock of migratepage() callback)
7 - return from migratepage() callback
8 - unlock page
}
The new mode MIGRATE_SYNC_NO_COPY:
1 - lock multiple pages
For each page {
2 - call migratepage() callback
3 - abort in all problematic migratepage() callback
4 - migrate page state (freeze refcount, update page cache, buffer
head, ...)
} // finished all calls to migratepage() callback
5 - DMA copy multiple pages
6 - unlock all the pages
To support MIGRATE_SYNC_NO_COPY in the problematic case we would need a
new callback migratepages() (for instance) that deals with multiple
pages in one transaction.
Because the problematic cases are not important for current usage I did
not wanted to complexify this patchset even more for no good reason.
Link: http://lkml.kernel.org/r/20170817000548.32038-14-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Nellans <dnellans@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Sherry Cheung <SCheung@nvidia.com>
Cc: Subhash Gutti <sgutti@nvidia.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Bob Liu <liubo95@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch refactors get_lock_data_page() to handle encryption case directly.
In order to do that, it introduces common f2fs_submit_page_read().
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Pull block layer updates from Jens Axboe:
"This is the first pull request for 4.14, containing most of the code
changes. It's a quiet series this round, which I think we needed after
the churn of the last few series. This contains:
- Fix for a registration race in loop, from Anton Volkov.
- Overflow complaint fix from Arnd for DAC960.
- Series of drbd changes from the usual suspects.
- Conversion of the stec/skd driver to blk-mq. From Bart.
- A few BFQ improvements/fixes from Paolo.
- CFQ improvement from Ritesh, allowing idling for group idle.
- A few fixes found by Dan's smatch, courtesy of Dan.
- A warning fixup for a race between changing the IO scheduler and
device remova. From David Jeffery.
- A few nbd fixes from Josef.
- Support for cgroup info in blktrace, from Shaohua.
- Also from Shaohua, new features in the null_blk driver to allow it
to actually hold data, among other things.
- Various corner cases and error handling fixes from Weiping Zhang.
- Improvements to the IO stats tracking for blk-mq from me. Can
drastically improve performance for fast devices and/or big
machines.
- Series from Christoph removing bi_bdev as being needed for IO
submission, in preparation for nvme multipathing code.
- Series from Bart, including various cleanups and fixes for switch
fall through case complaints"
* 'for-4.14/block' of git://git.kernel.dk/linux-block: (162 commits)
kernfs: checking for IS_ERR() instead of NULL
drbd: remove BIOSET_NEED_RESCUER flag from drbd_{md_,}io_bio_set
drbd: Fix allyesconfig build, fix recent commit
drbd: switch from kmalloc() to kmalloc_array()
drbd: abort drbd_start_resync if there is no connection
drbd: move global variables to drbd namespace and make some static
drbd: rename "usermode_helper" to "drbd_usermode_helper"
drbd: fix race between handshake and admin disconnect/down
drbd: fix potential deadlock when trying to detach during handshake
drbd: A single dot should be put into a sequence.
drbd: fix rmmod cleanup, remove _all_ debugfs entries
drbd: Use setup_timer() instead of init_timer() to simplify the code.
drbd: fix potential get_ldev/put_ldev refcount imbalance during attach
drbd: new disk-option disable-write-same
drbd: Fix resource role for newly created resources in events2
drbd: mark symbols static where possible
drbd: Send P_NEG_ACK upon write error in protocol != C
drbd: add explicit plugging when submitting batches
drbd: change list_for_each_safe to while(list_first_entry_or_null)
drbd: introduce drbd_recv_header_maybe_unplug
...
-----BEGIN PGP SIGNATURE-----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=LLY3
-----END PGP SIGNATURE-----
Merge tag 'wberr-v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull writeback error handling updates from Jeff Layton:
"This pile continues the work from last cycle on better tracking
writeback errors. In v4.13 we added some basic errseq_t infrastructure
and converted a few filesystems to use it.
This set continues refining that infrastructure, adds documentation,
and converts most of the other filesystems to use it. The main
exception at this point is the NFS client"
* tag 'wberr-v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
ecryptfs: convert to file_write_and_wait in ->fsync
mm: remove optimizations based on i_size in mapping writeback waits
fs: convert a pile of fsync routines to errseq_t based reporting
gfs2: convert to errseq_t based writeback error reporting for fsync
fs: convert sync_file_range to use errseq_t based error-tracking
mm: add file_fdatawait_range and file_write_and_wait
fuse: convert to errseq_t based error tracking for fsync
mm: consolidate dax / non-dax checks for writeback
Documentation: add some docs for errseq_t
errseq: rename __errseq_set to errseq_set
This patch renames functions regarding to buffer management via META_MAPPING
used for encrypted blocks especially. We can actually use them in generic way.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch replaces (f2fs_encrypted_inode() && S_ISREG()) with
f2fs_encrypted_file(), which gives no functional change.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This reverts commit b7b7c4cf1c.
se->ckpt_valid_blocks will never be smaller than se->valid_blocks, so just
remove get_ssr_cost.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
super_operations are not supposed to change at runtime.
"struct super_block" working with super_operations provided
by <linux/fs.h> work with const super_operations. So mark
the non-const structs as const
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In scenario of remount_ro vs flush, after flush_thread exits in
->remount_fs, flusher will only clean up golbal issue_list, but
without waking up flushers waiting on that list, result in hang
related user threads.
In order to fix this issue, this patch enables the flusher to
take charge of issue_flush thread: executes merged flush command,
and wake up all sleeping flushers.
Fixes: 5eba8c5d1f ("f2fs: fix to access nullified flush_cmd_control pointer")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, we will miss merging flush command during fsync due to below
race condition:
Thread A Thread B Thread C
- f2fs_issue_flush
- atomic_read(&issing_flush)
- f2fs_issue_flush
- atomic_read(&issing_flush)
- f2fs_issue_flush
- atomic_read(&issing_flush)
- atomic_inc(&issing_flush)
- atomic_inc(&issing_flush)
- atomic_inc(&issing_flush)
- submit_flush_wait
- submit_flush_wait
- submit_flush_wait
It needs to use atomic_inc_return instead to avoid such race.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
allocate_segment_by_default is the only caller of change_curseg passing
@reuse with 'false', but commit 763bfe1bc5 ("f2fs: remove reusing any
prefree segments") removes the calling, after that, @reuse in
change_curseg always be true, so, let's clean up the unneeded parameter.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs enables hash-indexed directory by default, so we need to tag
FS_INDEX_FL in inode::i_flags during directory creataion, in order
to show correct status of inode in lsattr:
Before:
------------------- /mnt/f2fs/dir/
After:
-----------I------- /mnt/f2fs/dir/
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If another thread already made the page dirtied or writebacked, we must avoid
to verify checksum. If we got an error, we need to remove its uptodate as well.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes "f2fs: support inode checksum".
The recovered inode page will be rewritten with valid checksum.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Sqlite only cares about synchronization of file data instead of other data
unrelated attribute of inode, so in commit flow, call fdatasync is enough.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We won't wait DIO synchronously when doing AIO, so there will be potential
IO reorder in between AIO and GC, which will cause data corruption.
This patch adds inode_dio_wait to serialize aio and data GC to avoid this
issue.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If file offset is insane, we have to return error instead of kernel panic.
Reported-by: Eric Zhang <followme999@163.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If file was not opened with atomic write mode, but user uses atomic write
ioctl to fsync datas, in the flow, we should not fsync that file with
atomic write mode.
Fixes: 608514deba ("f2fs: set fsync mark only for the last dnode")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes to clear FI_HOT_DATA correctly in below path:
- error handling in f2fs_ioc_start_atomic_write
- after commit atomic write in f2fs_ioc_commit_atomic_write
- after drop atomic write in drop_inmem_pages
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In f2fs_issue_flush, due to out-of-order execution of CPU, wake_up can
be called before we insert issue_list, result in long latency of
wait_for_completion. Fix this by adding smp_mb() to force the order of
related codes.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It's time to issue all the discard commands, if user sets the idle time.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This way we don't need a block_device structure to submit I/O. The
block_device has different life time rules from the gendisk and
request_queue and is usually only available when the block device node
is open. Other callers need to explicitly create one (e.g. the lightnvm
passthrough code, or the new nvme multipathing code).
For the actual I/O path all that we need is the gendisk, which exists
once per block device. But given that the block layer also does
partition remapping we additionally need a partition index, which is
used for said remapping in generic_make_request.
Note that all the block drivers generally want request_queue or
sometimes the gendisk, so this removes a layer of indirection all
over the stack.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit d618ebaf0a ("f2fs: enable small discard by default") enables
f2fs to issue 4K size discard in real-time discard mode. However, issuing
smaller discard may cost more lifetime but releasing less free space in
flash device. Since f2fs has ability of separating hot/cold data and
garbage collection, we can expect that small-sized invalid region would
expand soon with OPU, deletion or garbage collection on valid datas, so
it's better to delay or skip issuing smaller size discards, it could help
to reduce overmuch consumption of IO bandwidth and lifetime of flash
storage.
This patch makes f2fs selectng 64K size as its default minimal
granularity, and issue discard with the size which is not smaller than
minimal granularity. Also it exposes discard granularity as sysfs entry
for configuration in different scenario.
Jaegeuk Kim:
We must issue all the accumulated discard commands when fstrim is called.
So, I've added pend_list_tag[] to indicate whether we should issue the
commands or not. If tag sets P_ACTIVE or P_TRIM, we have to issue them.
P_TRIM is set once at a time, given fstrim trigger.
In addition, issue_discard_thread is calling too much due to the number of
discard commands remaining in the pending list. I added a timer to control
it likewise gc_thread.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We need to check HOT_DATA to truncate any previous data block when doing
roll-forward recovery.
Cc: <stable@vger.kernel.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
During atomic committing, if we encounter -ENOMEM in revoke path, it's
better to give a chance to retry revoking.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If we set CP_ERROR_FLAG in roll-forward error, f2fs is no longer to proceed
any IOs due to f2fs_cp_error(). But, for example, if some stale data is involved
on roll-forward process, we're able to get -ENOENT, getting fs stuck.
If we get any error, let fill_super set SBI_NEED_FSCK and try to recover back
to stable point.
Cc: <stable@vger.kernel.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Currently, the two flags F2FS_GET_BLOCK_[READ|DIO] are totally equivalent
and can be used interchangably in all scenarios they are involved in.
Neither of the flags is referenced in f2fs_map_blocks(), making them both
the default case. To remove the ambiguity, this patch merges both flags
into F2FS_GET_BLOCK_DEFAULT, and introduces an enum for all distinct flags.
Signed-off-by: Qiuyang Sun <sunqiuyang@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch supports to enable f2fs to accept quota information through
mount option:
- {usr,grp,prj}jquota=<quota file path>
- jqfmt=<quota type>
Then, in ->mount flow, we can recover quota file during log replaying,
by this, journelled quota can be supported.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: Fix wrong return values.]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
While comparing signed and unsigned variables, compiler will converts the
signed value to unsigned one, due to this reason, {in,de}crease_sleep_time
may return overflowed result.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We only need to sync quota file with appointed quota type instead of all
types in f2fs_quota_{on,off}.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds a sysfs entry to control urgent mode for background GC.
If this is set, background GC thread conducts GC with gc_urgent_sleep_time
all the time.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We expect cold files write data sequentially, but sometimes some of small data
can be updated, which incurs fragmentation.
Let's avoid that.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The current size value is not correct and will miss bitmap check.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When cur_valid_map passes the f2fs_test_and_set(,clear)_bit test,
cur_valid_map_mir update is skipped unlikely, so fix it. The fix
now changes the mirror check together with cur_valid_map all the
time.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: Fix unused variable and add unlikely for corner condition.]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch exposes what features are supported by current f2fs build to sysfs
entry via:
/sys/fs/f2fs/features/
/sys/fs/f2fs/dev/features
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds to support inode checksum in f2fs.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: fix verification flow]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Let node writeback also do f2fs_balance_fs to ensure there are always enough free
segments.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch converts most of the in-kernel filesystems that do writeback
out of the pagecache to report errors using the errseq_t-based
infrastructure that was recently added. This allows them to report
errors once for each open file description.
Most filesystems have a fairly straightforward fsync operation. They
call filemap_write_and_wait_range to write back all of the data and
wait on it, and then (sometimes) sync out the metadata.
For those filesystems this is a straightforward conversion from calling
filemap_write_and_wait_range in their fsync operation to calling
file_write_and_wait_range.
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
This patch introduces f2fs_statfs_project, it enables to show usage
status of directory tree which is limited with project quota.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds FS_IOC_FSSETXATTR/FS_IOC_FSGETXATTR ioctl interface
support for f2fs. The interface is kept consistent with the one
of ext4/xfs.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch changes the function names of sysfs init to follow ext4.
f2fs_init_sysfs <-> f2fs_register_sysfs
f2fs_exit_sysfs <-> f2fs_unregister_sysfs
Suggested-by: Chao Yu <yuchao0@huawei.com>
Reivewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In ->lookup(), we will have a try to recover dot or dotdot for
corrupted directory, once disk quota is on, if it allocates new
block during dotdot recovery, we need to record disk quota info
for the allocation, so this patch fixes this issue by adding
missing dquot_initialize() in __recover_dot_dentries.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch add new flag F2FS_EXTRA_ATTR storing in inode.i_inline
to indicate that on-disk structure of current inode is extended.
In order to extend, we changed the inode structure a bit:
Original one:
struct f2fs_inode {
...
struct f2fs_extent i_ext;
__le32 i_addr[DEF_ADDRS_PER_INODE];
__le32 i_nid[DEF_NIDS_PER_INODE];
}
Extended one:
struct f2fs_inode {
...
struct f2fs_extent i_ext;
union {
struct {
__le16 i_extra_isize;
__le16 i_padding;
__le32 i_extra_end[0];
};
__le32 i_addr[DEF_ADDRS_PER_INODE];
};
__le32 i_nid[DEF_NIDS_PER_INODE];
}
Once F2FS_EXTRA_ATTR is set, we will steal four bytes in the head of
i_addr field for storing i_extra_isize and i_padding. with i_extra_isize,
we can calculate actual size of reserved space in i_addr, available
attribute fields included in total extra attribute fields for current
inode can be described as below:
+--------------------+
| .i_mode |
| ... |
| .i_ext |
+--------------------+
| .i_extra_isize |-----+
| .i_padding | |
| .i_prjid | |
| .i_atime_extra | |
| .i_ctime_extra | |
| .i_mtime_extra |<----+
| .i_inode_cs |<----- store blkaddr/inline from here
| .i_xattr_cs |
| ... |
+--------------------+
| |
| block address |
| |
+--------------------+
| .i_nid |
+--------------------+
| node_footer |
| (nid, ino, offset) |
+--------------------+
Hence, with this patch, we would enhance scalability of f2fs inode for
storing more newly added attribute.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch tries to make below macros calculating max inline size,
inline dentry field size considerring reserving size-changeable
space:
- MAX_INLINE_DATA
- NR_INLINE_DENTRY
- INLINE_DENTRY_BITMAP_SIZE
- INLINE_RESERVED_SIZE
Then, when inline_{data,dentry} options is enabled, it allows us to
reserve inline space with different size flexibly for adding newly
introduced inode attribute.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds an ioctl to provide feature information to user.
For exapmle, SQLite can use this ioctl to detect whether f2fs support atomic
write or not.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch resolves the below scenario.
== Process 1 == == Process 2 ==
open(w) open(rw)
begin
write(new_#1)
process_crash
f_op->flush
locks_remove_posix
f_op>release
read (new_#1)
In order to avoid corrupted database caused by new_#1, we must do roll-back
at process_crash time. In order to check that, this patch keeps task which
triggers transaction begin, and does roll-back in f_op->flush before removing
file locks.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It'd be better to retry writing atomic pages when we get -ENOMEM.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When changing a file's acl mask, __f2fs_set_acl() will first set the
group bits of i_mode to the value of the mask, and only then set the
actual extended attribute representing the new acl.
If the second part fails (due to lack of space, for example) and the
file had no acl attribute to begin with, the system will from now on
assume that the mask permission bits are actual group permission bits,
potentially granting access to the wrong users.
Prevent this by only changing the inode mode after the acl has been set.
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
recovery file A: recovery file B:
-get_dnode_of_data
-alloc_nid
-recover_xattr_data
-set_node_addr(sbi, &ni, NEW_ADDR, false);
--->bug_on for nid has been used by file A
In recovery process, new allocated node blocks may "reuse" xattr block
nids, this patch alloc new nids for xattr blocks in recovery process to
avoid this problem.
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Use f2fs_dentry_ptr structure to indicate inline dentry structure as
much as possible, so we can wrap inline dentry with size-fixed fields
to the one with size-changeable fields. With this change, we can
handle size-changeable inline dentry more easily.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch remove unused input parameter in function
new_node_page.
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Signed-off-by: Yong Sheng <shengyong1@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Before retrying to flush data or dentry pages, we need to release cpu in order
to prevent watchdog.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch includes seq_file.h to avoid compile error.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch copies commit b7f8a09f80:
"btrfs: Don't clear SGID when inheriting ACLs" written by Jan.
Fixes: 073931017b
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This commit removes an extra inode_unlock() that is being done in function
f2fs_ioc_setflags error path. While there, get rid of a useless 'out'
label as well.
Fixes: 0abd675e97 ("f2fs: support plain user/group quota")
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In this round, we've added new features such as disk quota and statx, and
modified internal bio management flow to merge more IOs depending on block
types. We've also made internal threads freezeable for Android battery life.
In addition to them, there are some patches to avoid lock contention as well
as a couple of deadlock conditions.
= Enhancement
- support usrquota, grpquota, and statx
- manage DATA/NODE typed bios separately to serialize more IOs
- modify f2fs_lock_op/wio_mutex to avoid lock contention
- prevent lock contention in migratepage
= Bug fix
- miss to load written inode flag
- fix worst case victim selection in GC
- freezeable GC and discard threads for Android battery life
- sanitize f2fs metadata to deal with security hole
- clean up sysfs-related code and docs
-----BEGIN PGP SIGNATURE-----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=N4GZ
-----END PGP SIGNATURE-----
Merge tag 'for-f2fs-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've added new features such as disk quota and statx,
and modified internal bio management flow to merge more IOs depending
on block types. We've also made internal threads freezeable for
Android battery life. In addition to them, there are some patches to
avoid lock contention as well as a couple of deadlock conditions.
Enhancements:
- support usrquota, grpquota, and statx
- manage DATA/NODE typed bios separately to serialize more IOs
- modify f2fs_lock_op/wio_mutex to avoid lock contention
- prevent lock contention in migratepage
Bug fixes:
- fix missing load of written inode flag
- fix worst case victim selection in GC
- freezeable GC and discard threads for Android battery life
- sanitize f2fs metadata to deal with security hole
- clean up sysfs-related code and docs"
* tag 'for-f2fs-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (59 commits)
f2fs: support plain user/group quota
f2fs: avoid deadlock caused by lock order of page and lock_op
f2fs: use spin_{,un}lock_irq{save,restore}
f2fs: relax migratepage for atomic written page
f2fs: don't count inode block in in-memory inode.i_blocks
Revert "f2fs: fix to clean previous mount option when remount_fs"
f2fs: do not set LOST_PINO for renamed dir
f2fs: do not set LOST_PINO for newly created dir
f2fs: skip ->writepages for {mete,node}_inode during recovery
f2fs: introduce __check_sit_bitmap
f2fs: stop gc/discard thread in prior during umount
f2fs: introduce reserved_blocks in sysfs
f2fs: avoid redundant f2fs_flush after remount
f2fs: report # of free inodes more precisely
f2fs: add ioctl to do gc with target block address
f2fs: don't need to check encrypted inode for partial truncation
f2fs: measure inode.i_blocks as generic filesystem
f2fs: set CP_TRIMMED_FLAG correctly
f2fs: require key for truncate(2) of encrypted file
f2fs: move sysfs code from super.c to fs/f2fs/sysfs.c
...
This patch adds to support plain user/group quota.
Change Note by Jaegeuk Kim.
- Use f2fs page cache for quota files in order to consider garbage collection.
so, quota files are not tolerable for sudden power-cuts, so user needs to do
quotacheck.
- setattr() calls dquot_transfer which will transfer inode->i_blocks.
We can't reclaim that during f2fs_evict_inode(). So, we need to count
node blocks as well in order to match i_blocks with dquot's space.
Note that, Chao wrote a patch to count inode->i_blocks without inode block.
(f2fs: don't count inode block in in-memory inode.i_blocks)
- in f2fs_remount, we need to make RW in prior to dquot_resume.
- handle fault_injection case during f2fs_quota_off_umount
- TODO: Project quota
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In order to avoid lock contention for atomic written pages, we'd better give
EBUSY in f2fs_migrate_page when mode is asynchronous. We expect it will be
released soon as transaction commits.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, we count all inode consumed blocks including inode block,
xattr block, index block, data block into i_blocks, for other generic
filesystems, they won't count inode block into i_blocks, so for
userspace applications or quota system, they may detect incorrect block
count according to i_blocks value in inode.
This patch changes to count all blocks into inode.i_blocks excluding
inode block, for on-disk i_blocks, we keep counting inode block for
backward compatibility.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Don't clear old mount option before parse new option during ->remount_fs
like other generic filesystems.
This reverts commit 26666c8a43.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
After renaming a directory, fsck could detect unmatched pino. The scenario
can be reproduced as the following:
$ mkdir /bar/subbar /foo
$ rename /bar/subbar /foo
Then fsck will report:
[ASSERT] (__chk_dots_dentries:1182) --> Bad inode number[0x3] for '..', parent parent ino is [0x4]
Rename sets LOST_PINO for old_inode. However, the flag cannot be cleared,
since dir is written back with CP. So, let's get rid of LOST_PINO for a
renamed dir and fix the pino directly at the end of rename.
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Since directories will be written back with checkpoint and fsync a
directory will always write CP, there is no need to set LOST_PINO
after creating a directory.
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Skip ->writepages in prior to ->writepage for {meta,node}_inode during
recovery, hence unneeded loop in ->writepages can be avoided.
Moreover, check SBI_POR_DOING earlier while writebacking pages.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
After we introduce discard thread, discard command can be issued
concurrently with data allocating, this patch adds new function to
heck sit bitmap to ensure that userdata was invalid in which on-going
discard command covered.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch resolves kernel panic for xfstests/081, caused by recent f2fs_bug_on
f2fs: add f2fs_bug_on in __remove_discard_cmd
For fixing, we will stop gc/discard thread in prior in ->kill_sb in order to
avoid referring and releasing race among them.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In this patch, we add a new sysfs interface, with it, we can control
number of reserved blocks in system which could not be used by user,
it enable f2fs to let user to configure for adjusting over-provision
ratio dynamically instead of changing it by mkfs.
So we can expect it will help to reserve more free space for relieving
GC in both filesystem and flash device.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
create_flush_cmd_control will create redundant issue_flush_thread after each
remount with flush_merge option.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If the partition is small, we don't need to report total # of inodes including
hidden free nodes.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Both in memory or on disk, generic filesystems record i_blocks with
512bytes sized sector count, also VFS sub module such as disk quota
follows this rule, but f2fs records it with 4096bytes sized block
count, this difference leads to that once we use dquota's function
which inc/dec iblocks, it will make i_blocks of f2fs being inconsistent
between in memory and on disk.
In order to resolve this issue, this patch changes to make in-memory
i_blocks of f2fs recording sector count instead of block count,
meanwhile leaving on-disk i_blocks recording block count.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Don't set CP_TRIMMED_FLAG for non-zoned block device or discard
unsupported device, it can avoid to trigger unneeded checkpoint for
that kind of device.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Currently, filesystems allow truncate(2) on an encrypted file without
the encryption key. However, it's impossible to correctly handle the
case where the size being truncated to is not a multiple of the
filesystem block size, because that would require decrypting the final
block, zeroing the part beyond i_size, then encrypting the block.
As other modifications to encrypted file contents are prohibited without
the key, just prohibit truncate(2) as well, making it fail with ENOKEY.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Codes related to sysfs and procfs are dispersive and mixed with sb
related codes, but actually these codes are independent from others,
so split them from super.c, and reorgnize and manger them in sysfs.c.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes incorrect error number in error path of fill_super.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If fault injection functionality is enabled, show additional injection
rate in ->show_options.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
err must be set to -ENOMEM, otherwise we return 0.
Fixes: a912b54d3a ("f2fs: split bio cache")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It is better to use variable name "inline_dentry" instead of "dentry_blk"
when data type is "struct f2fs_inline_dentry". This patch has no functional
changes, just to make code more readable especially when call the function
make_dentry_ptr_inline() and f2fs_convert_inline_dir().
Signed-off-by: Tiezhu Yang <kernelpatch@126.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
With fault_injection option, generic/361 of fstests will complain us
with below message:
Call Trace:
get_node_page+0x12/0x20 [f2fs]
f2fs_iget+0x92/0x7d0 [f2fs]
f2fs_fill_super+0x10fb/0x15e0 [f2fs]
mount_bdev+0x184/0x1c0
f2fs_mount+0x15/0x20 [f2fs]
mount_fs+0x39/0x150
vfs_kern_mount+0x67/0x110
do_mount+0x1bb/0xc70
SyS_mount+0x83/0xd0
do_syscall_64+0x6e/0x160
entry_SYSCALL64_slow_path+0x25/0x25
Since mkfs loop device in f2fs partition can be failed silently due to
checkpoint error injection, so root inode page can be corrupted, in order
to avoid needless panic, in get_node_page, it's better to leave message
and return error to caller, and let fsck repaire it later.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We will never persist newly allocated nat entries during checkpoint(), so
we don't need to track such nat entries in nat dirty list in order to
avoid:
- more latency during traversing dirty list;
- sorting nat sets incorrectly due to recording wrong entry_cnt in nat
entry set.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Recently, discard related codes have changed a lot, so add f2fs_bug_on to
detect potential bug.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Currently in F2FS, page faults and operations that truncate the pagecahe
or data blocks, are completely unsynchronized. This can result in page
fault faulting in a page into a range that we are changing after
truncating, and thus we can end up with a page mapped to disk blocks that
will be shortly freed. Filesystem corruption will shortly follow.
This patch fixes the problem by creating new rw semaphore i_mmap_sem in
f2fs_inode_info and grab it for functions removing blocks from extent tree
and for read over page faults. The mechanism is similar to that in ext4.
Signed-off-by: Qiuyang Sun <sunqiuyang@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The index of segment which the next nat block is in has only one different
bit than the current one, so to get the next nat address, we can simply
alter that one bit.
Signed-off-by: Fan Li <fanofcode.li@samsung.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Make sure number of entires doesn't exceed max journal size.
Cc: stable@vger.kernel.org
Signed-off-by: Jin Qian <jinqian@android.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Mount fs with option noflush_merge, boot failed for illegal address
fcc in function f2fs_issue_flush:
if (!test_opt(sbi, FLUSH_MERGE)) {
ret = submit_flush_wait(sbi);
atomic_inc(&fcc->issued_flush); -> Here, fcc illegal
return ret;
}
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It's not necessary to specify 'int' casting for PTR_ERR.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For example,
f2fs_create
- new_node_page is failed
- handle_failed_inode
- skip to add it into orphan list, since ni.blk_addr == NULL_ADDR
: set_inode_flag(inode, FI_FREE_NID)
f2fs_evict_inode
- EIO due to fault injection
- f2fs_bug_on() is triggered
So, we don't need to call f2fs_bug_on in this case.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
clear_prefree_segments() issues small discards after discarding full
segments. These small discards may not be section aligned, so not zone
aligned on a zoned block device, causing __f2fs_iissue_discard_zone() to fail.
Fix this by not issuing small discards for a volume mounted with the BLKZONED
feature enabled.
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Pull core block/IO updates from Jens Axboe:
"This is the main pull request for the block layer for 4.13. Not a huge
round in terms of features, but there's a lot of churn related to some
core cleanups.
Note this depends on the UUID tree pull request, that Christoph
already sent out.
This pull request contains:
- A series from Christoph, unifying the error/stats codes in the
block layer. We now use blk_status_t everywhere, instead of using
different schemes for different places.
- Also from Christoph, some cleanups around request allocation and IO
scheduler interactions in blk-mq.
- And yet another series from Christoph, cleaning up how we handle
and do bounce buffering in the block layer.
- A blk-mq debugfs series from Bart, further improving on the support
we have for exporting internal information to aid debugging IO
hangs or stalls.
- Also from Bart, a series that cleans up the request initialization
differences across types of devices.
- A series from Goldwyn Rodrigues, allowing the block layer to return
failure if we will block and the user asked for non-blocking.
- Patch from Hannes for supporting setting loop devices block size to
that of the underlying device.
- Two series of patches from Javier, fixing various issues with
lightnvm, particular around pblk.
- A series from me, adding support for write hints. This comes with
NVMe support as well, so applications can help guide data placement
on flash to improve performance, latencies, and write
amplification.
- A series from Ming, improving and hardening blk-mq support for
stopping/starting and quiescing hardware queues.
- Two pull requests for NVMe updates. Nothing major on the feature
side, but lots of cleanups and bug fixes. From the usual crew.
- A series from Neil Brown, greatly improving the bio rescue set
support. Most notably, this kills the bio rescue work queues, if we
don't really need them.
- Lots of other little bug fixes that are all over the place"
* 'for-4.13/block' of git://git.kernel.dk/linux-block: (217 commits)
lightnvm: pblk: set line bitmap check under debug
lightnvm: pblk: verify that cache read is still valid
lightnvm: pblk: add initialization check
lightnvm: pblk: remove target using async. I/Os
lightnvm: pblk: use vmalloc for GC data buffer
lightnvm: pblk: use right metadata buffer for recovery
lightnvm: pblk: schedule if data is not ready
lightnvm: pblk: remove unused return variable
lightnvm: pblk: fix double-free on pblk init
lightnvm: pblk: fix bad le64 assignations
nvme: Makefile: remove dead build rule
blk-mq: map all HWQ also in hyperthreaded system
nvmet-rdma: register ib_client to not deadlock in device removal
nvme_fc: fix error recovery on link down.
nvmet_fc: fix crashes on bad opcodes
nvme_fc: Fix crash when nvme controller connection fails.
nvme_fc: replace ioabort msleep loop with completion
nvme_fc: fix double calls to nvme_cleanup_cmd()
nvme-fabrics: verify that a controller returns the correct NQN
nvme: simplify nvme_dev_attrs_are_visible
...
- introduce the new uuid_t/guid_t types that are going to replace
the somewhat confusing uuid_be/uuid_le types and make the terminology
fit the various specs, as well as the userspace libuuid library.
(me, based on a previous version from Amir)
- consolidated generic uuid/guid helper functions lifted from XFS
and libnvdimm (Amir and me)
- conversions to the new types and helpers (Amir, Andy and me)
-----BEGIN PGP SIGNATURE-----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=J/4P
-----END PGP SIGNATURE-----
Merge tag 'uuid-for-4.13' of git://git.infradead.org/users/hch/uuid
Pull uuid subsystem from Christoph Hellwig:
"This is the new uuid subsystem, in which Amir, Andy and I have started
consolidating our uuid/guid helpers and improving the types used for
them. Note that various other subsystems have pulled in this tree, so
I'd like it to go in early.
UUID/GUID summary:
- introduce the new uuid_t/guid_t types that are going to replace the
somewhat confusing uuid_be/uuid_le types and make the terminology
fit the various specs, as well as the userspace libuuid library.
(me, based on a previous version from Amir)
- consolidated generic uuid/guid helper functions lifted from XFS and
libnvdimm (Amir and me)
- conversions to the new types and helpers (Amir, Andy and me)"
* tag 'uuid-for-4.13' of git://git.infradead.org/users/hch/uuid: (34 commits)
ACPI: hns_dsaf_acpi_dsm_guid can be static
mmc: sdhci-pci: make guid intel_dsm_guid static
uuid: Take const on input of uuid_is_null() and guid_is_null()
thermal: int340x_thermal: fix compile after the UUID API switch
thermal: int340x_thermal: Switch to use new generic UUID API
acpi: always include uuid.h
ACPI: Switch to use generic guid_t in acpi_evaluate_dsm()
ACPI / extlog: Switch to use new generic UUID API
ACPI / bus: Switch to use new generic UUID API
ACPI / APEI: Switch to use new generic UUID API
acpi, nfit: Switch to use new generic UUID API
MAINTAINERS: add uuid entry
tmpfs: generate random sb->s_uuid
scsi_debug: switch to uuid_t
nvme: switch to uuid_t
sysctl: switch to use uuid_t
partitions/ldm: switch to use uuid_t
overlayfs: use uuid_t instead of uuid_be
fs: switch ->s_uuid to uuid_t
ima/policy: switch to use uuid_t
...
Replace bi_error with a new bi_status to allow for a clear conversion.
Note that device mapper overloaded bi_error with a private value, which
we'll have to keep arround at least for now and thus propagate to a
proper blk_status_t value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
On sparc, if we have an alloca() like situation, as is the case with
SHASH_DESC_ON_STACK(), we can end up referencing deallocated stack
memory. The result can be that the value is clobbered if a trap
or interrupt arrives at just the right instruction.
It only occurs if the function ends returning a value from that
alloca() area and that value can be placed into the return value
register using a single instruction.
For example, in lib/libcrc32c.c:crc32c() we end up with a return
sequence like:
return %i7+8
lduw [%o5+16], %o0 ! MEM[(u32 *)__shash_desc.1_10 + 16B],
%o5 holds the base of the on-stack area allocated for the shash
descriptor. But the return released the stack frame and the
register window.
So if an intererupt arrives between 'return' and 'lduw', then
the value read at %o5+16 can be corrupted.
Add a data compiler barrier to work around this problem. This is
exactly what the gcc fix will end up doing as well, and it absolutely
should not change the code generated for other cpus (unless gcc
on them has the same bug :-)
With crucial insight from Eric Sandeen.
Cc: <stable@vger.kernel.org>
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For some file systems we still memcpy into it, but in various places this
already allows us to use the proper uuid helpers. More to come..
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com> (Changes to IMA/EVM)
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Since only an open file can be written to, and we only allow open()ing
an encrypted file when its key is available, there is no need to check
for the key again before permitting each ->write_iter().
This code was also broken in that it wouldn't actually have failed if
the key was in fact unavailable.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: David Gstir <david@sigma-star.at>
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Since only an open file can be mmap'ed, and we only allow open()ing an
encrypted file when its key is available, there is no need to check for
the key again before permitting each mmap().
This f2fs copy of this code was also broken in that it wouldn't actually
have failed if the key was in fact unavailable.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: David Gstir <david@sigma-star.at>
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Wait discard IO completion outside cmd_lock to avoid long latency
of holding cmd_lock in IO busy scenario.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There could be more than one waiter waiting discard IO completion, so we
need use complete_all() instead of complete() in f2fs_submit_discard_endio
to avoid hungtask.
Fixes: ec9895add2 ("f2fs: don't hold cmd_lock during waiting discard
command")
Cc: <stable@vger.kernel.org>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Serialize data/node IOs by using fifo list instead of mutex lock,
it will help to enhance concurrency of f2fs, meanwhile keeping LFS
IO semantics.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Came across a hungtask caused by huge number of rb tree traversing
during adding discard addrs in cp. This patch combine these consistence
checks and move it to discard thread.
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch add a new method get_ssr_cost to select
SSR segment more accurately.
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Currently, if we do get_node_of_data before f2fs_lock_op, there may be dead lock
as follows, where process A would be in infinite loop, and B will NOT be awaked.
Process A(cp): Process B:
f2fs_lock_all(sbi)
get_dnode_of_data <---- lock dn.node_page
flush_nodes f2fs_lock_op
So, this patch adds f2fs_trylock_op to avoid f2fs_lock_op done by IPU.
Signed-off-by: Hou Pengyang <houpengyang@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Split DATA/NODE type bio cache according to different temperature,
so write IOs with the same temperature can be merged in corresponding
bio cache as much as possible, otherwise, different temperature write
IOs submitting into one bio cache will always cause split of bio.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
