rxe_mcast_add_grp_elem() in rxe_mcast.c calls rxe_alloc() while holding
spinlocks which in turn calls kzalloc(size, GFP_KERNEL) which is
incorrect. This patch replaces rxe_alloc() by rxe_alloc_locked() which
uses GFP_ATOMIC. This bug was caused by the below mentioned commit and
failing to handle the need for the atomic allocate.
Fixes: 4276fd0ddd ("RDMA/rxe: Remove RXE_POOL_ATOMIC")
Link: https://lore.kernel.org/r/20210813210625.4484-1-rpearsonhpe@gmail.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Not much to see here. Half the fixes this time are for Qualcomm dts files,
fixing small mistakes on certain machines. The other fixes are:
- A 5.13 regression fix for freescale QE interrupt controller\
- A fix for TI OMAP gpt12 timer error handling
- A randconfig build regression fix for ixp4xx
- Another defconfig fix following the CONFIG_FB dependency rework
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=Ohvh
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-5.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Not much to see here. Half the fixes this time are for Qualcomm dts
files, fixing small mistakes on certain machines. The other fixes are:
- A 5.13 regression fix for freescale QE interrupt controller\
- A fix for TI OMAP gpt12 timer error handling
- A randconfig build regression fix for ixp4xx
- Another defconfig fix following the CONFIG_FB dependency rework"
* tag 'soc-fixes-5.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: fsl: qe: fix static checker warning
ARM: ixp4xx: fix building both pci drivers
ARM: configs: Update the nhk8815_defconfig
bus: ti-sysc: Fix error handling for sysc_check_active_timer()
soc: fsl: qe: convert QE interrupt controller to platform_device
arm64: dts: qcom: sdm845-oneplus: fix reserved-mem
arm64: dts: qcom: msm8994-angler: Disable cont_splash_mem
arm64: dts: qcom: sc7280: Fixup cpufreq domain info for cpu7
arm64: dts: qcom: msm8992-bullhead: Fix cont_splash_mem mapping
arm64: dts: qcom: msm8992-bullhead: Remove PSCI
arm64: dts: qcom: c630: fix correct powerdown pin for WSA881x
mac80211 trees.
Current release - regressions:
- tipc: call tipc_wait_for_connect only when dlen is not 0
- mac80211: fix locking in ieee80211_restart_work()
Current release - new code bugs:
- bpf: add rcu_read_lock in bpf_get_current_[ancestor_]cgroup_id()
- ethernet: ice: fix perout start time rounding
- wwan: iosm: prevent underflow in ipc_chnl_cfg_get()
Previous releases - regressions:
- bpf: clear zext_dst of dead insns
- sch_cake: fix srchost/dsthost hashing mode
- vrf: reset skb conntrack connection on VRF rcv
- net/rds: dma_map_sg is entitled to merge entries
Previous releases - always broken:
- ethernet: bnxt: fix Tx path locking and races, add Rx path barriers
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ofv+
-----END PGP SIGNATURE-----
Merge tag 'net-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from bpf, wireless and mac80211
trees.
Current release - regressions:
- tipc: call tipc_wait_for_connect only when dlen is not 0
- mac80211: fix locking in ieee80211_restart_work()
Current release - new code bugs:
- bpf: add rcu_read_lock in bpf_get_current_[ancestor_]cgroup_id()
- ethernet: ice: fix perout start time rounding
- wwan: iosm: prevent underflow in ipc_chnl_cfg_get()
Previous releases - regressions:
- bpf: clear zext_dst of dead insns
- sch_cake: fix srchost/dsthost hashing mode
- vrf: reset skb conntrack connection on VRF rcv
- net/rds: dma_map_sg is entitled to merge entries
Previous releases - always broken:
- ethernet: bnxt: fix Tx path locking and races, add Rx path
barriers"
* tag 'net-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (42 commits)
net: dpaa2-switch: disable the control interface on error path
Revert "flow_offload: action should not be NULL when it is referenced"
iavf: Fix ping is lost after untrusted VF had tried to change MAC
i40e: Fix ATR queue selection
r8152: fix the maximum number of PLA bp for RTL8153C
r8152: fix writing USB_BP2_EN
mptcp: full fully established support after ADD_ADDR
mptcp: fix memory leak on address flush
net/rds: dma_map_sg is entitled to merge entries
net: mscc: ocelot: allow forwarding from bridge ports to the tag_8021q CPU port
net: asix: fix uninit value bugs
ovs: clear skb->tstamp in forwarding path
net: mdio-mux: Handle -EPROBE_DEFER correctly
net: mdio-mux: Don't ignore memory allocation errors
net: mdio-mux: Delete unnecessary devm_kfree
net: dsa: sja1105: fix use-after-free after calling of_find_compatible_node, or worse
sch_cake: fix srchost/dsthost hashing mode
ixgbe, xsk: clean up the resources in ixgbe_xsk_pool_enable error path
net: qlcnic: add missed unlock in qlcnic_83xx_flash_read32
mac80211: fix locking in ieee80211_restart_work()
...
A small set of pdx86 fixes for 5.14:
- asus-nb-wmi: Enable SW_TABLET_MODE support for the TP200s (DMI quirk)
- gigabyte-wmi: Enable on 2 more Gigabyte motherboards (2 DMI quirks)
The following is an automated git shortlog grouped by driver:
asus-nb-wmi:
- Add tablet_mode_sw=lid-flip quirk for the TP200s
- Allow configuring SW_TABLET_MODE method with a module option
gigabyte-wmi:
- add support for B450M S2H V2
- add support for X570 GAMING X
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmEeCR4UHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9yciAf7BkMzY4Lc9BAmxaEGQXKBBup9CDgl
WXN1lJLt8pGiAQIXONmbymyi3sq5rZQGMJU585pmNH40xScAfUOv0LtHW50dQsPZ
a3DAHwmoVGMDIXXLeufagHTmRovcv2uAsO/AbBN52kJg9TfT4jiA6XvOCL8Ayx30
9VzJK8P1ADqiA34AFNifbB+HbsTP/hCngr1HJL1f24SPY9L7R+MH13uW5uaXXKTl
Ltz/QIl+/N+pRwpgzchCT6snLLcX1e/kQQ5pIlb/hUWrW7NkplgzPe9yQ9bEOScy
Co7GH07j4KLLHbkq23bg3GztkezHDr4R+Cc3rdiO8OfnkmU93u5srdcUvA==
=tOIH
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- Enable SW_TABLET_MODE support for the TP200s
- Enable WMI on two more Gigabyte motherboards
* tag 'platform-drivers-x86-v5.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: gigabyte-wmi: add support for B450M S2H V2
platform/x86: gigabyte-wmi: add support for X570 GAMING X
platform/x86: asus-nb-wmi: Add tablet_mode_sw=lid-flip quirk for the TP200s
platform/x86: asus-nb-wmi: Allow configuring SW_TABLET_MODE method with a module option
The fixed commit removes all rtnl_lock() and rtnl_unlock() calls in
function bnxt_re_dev_init(), but forgets to remove a rtnl_unlock() in the
error handling path of bnxt_re_register_netdev(), which may cause a
deadlock. This bug is suggested by a static analysis tool.
Fixes: c2b777a959 ("RDMA/bnxt_re: Refactor device add/remove functionalities")
Link: https://lore.kernel.org/r/20210816085531.12167-1-dinghao.liu@zju.edu.cn
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently dpaa2_switch_takedown has a funny name and does not do the
opposite of dpaa2_switch_init, which makes probing fail when we need to
handle an -EPROBE_DEFER.
A sketch of what dpaa2_switch_init does:
dpsw_open
dpaa2_switch_detect_features
dpsw_reset
for (i = 0; i < ethsw->sw_attr.num_ifs; i++) {
dpsw_if_disable
dpsw_if_set_stp
dpsw_vlan_remove_if_untagged
dpsw_if_set_tci
dpsw_vlan_remove_if
}
dpsw_vlan_remove
alloc_ordered_workqueue
dpsw_fdb_remove
dpaa2_switch_ctrl_if_setup
When dpaa2_switch_takedown is called from the error path of
dpaa2_switch_probe(), the control interface, enabled by
dpaa2_switch_ctrl_if_setup from dpaa2_switch_init, remains enabled,
because dpaa2_switch_takedown does not call
dpaa2_switch_ctrl_if_teardown.
Since dpaa2_switch_probe might fail due to EPROBE_DEFER of a PHY, this
means that a second probe of the driver will happen with the control
interface directly enabled.
This will trigger a second error:
[ 93.273528] fsl_dpaa2_switch dpsw.0: dpsw_ctrl_if_set_pools() failed
[ 93.281966] fsl_dpaa2_switch dpsw.0: fsl_mc_driver_probe failed: -13
[ 93.288323] fsl_dpaa2_switch: probe of dpsw.0 failed with error -13
Which if we investigate the /dev/dpaa2_mc_console log, we find out is
caused by:
[E, ctrl_if_set_pools:2211, DPMNG] ctrl_if must be disabled
So make dpaa2_switch_takedown do the opposite of dpaa2_switch_init (in
reasonable limits, no reason to change STP state, re-add VLANs etc), and
rename it to something more conventional, like dpaa2_switch_teardown.
Fixes: 613c0a5810 ("staging: dpaa2-switch: enable the control interface")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20210819141755.1931423-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 9ea3e52c5b.
Cited commit added a check to make sure 'action' is not NULL, but
'action' is already dereferenced before the check, when calling
flow_offload_has_one_action().
Therefore, the check does not make any sense and results in a smatch
warning:
include/net/flow_offload.h:322 flow_action_mixed_hw_stats_check() warn:
variable dereferenced before check 'action' (see line 319)
Fix by reverting this commit.
Cc: gushengxian <gushengxian@yulong.com>
Fixes: 9ea3e52c5b ("flow_offload: action should not be NULL when it is referenced")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20210819105842.1315705-1-idosch@idosch.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-08-18
This series contains updates to i40e and iavf drivers.
Arkadiusz fixes Flow Director not using the correct queue due to calling
the wrong pick Tx function for i40e.
Sylwester resolves traffic loss for iavf when it attempts to change its
MAC address when it does not have permissions to do so.
====================
Link: https://lore.kernel.org/r/20210818174217.4138922-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make changes to MAC address dependent on the response of PF.
Disallow changes to HW MAC address and MAC filter from untrusted
VF, thanks to that ping is not lost if VF tries to change MAC.
Add a new field in iavf_mac_filter, to indicate whether there
was response from PF for given filter. Based on this field pass
or discard the filter.
If untrusted VF tried to change it's address, it's not changed.
Still filter was changed, because of that ping couldn't go through.
Fixes: c5c922b3e0 ("iavf: fix MAC address setting for VFs when filter is rejected")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Gurucharan G <Gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Without this patch, ATR does not work. Receive/transmit uses queue
selection based on SW DCB hashing method.
If traffic classes are not configured for PF, then use
netdev_pick_tx function for selecting queue for packet transmission.
Instead of calling i40e_swdcb_skb_tx_hash, call netdev_pick_tx,
which ensures that packet is transmitted/received from CPU that is
running the application.
Reproduction steps:
1. Load i40e driver
2. Map each MSI interrupt of i40e port for each CPU
3. Disable ntuple, enable ATR i.e.:
ethtool -K $interface ntuple off
ethtool --set-priv-flags $interface flow-director-atr
4. Run application that is generating traffic and is bound to a
single CPU, i.e.:
taskset -c 9 netperf -H 1.1.1.1 -t TCP_RR -l 10
5. Observe behavior:
Application's traffic should be restricted to the CPU provided in
taskset.
Fixes: 89ec1f0886 ("i40e: Fix queue-to-TC mapping on Tx")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2021-08-19
We've added 3 non-merge commits during the last 3 day(s) which contain
a total of 3 files changed, 29 insertions(+), 6 deletions(-).
The main changes are:
1) Fix to clear zext_dst for dead instructions which was causing invalid program
rejections on JITs with bpf_jit_needs_zext such as s390x, from Ilya Leoshkevich.
2) Fix RCU splat in bpf_get_current_{ancestor_,}cgroup_id() helpers when they are
invoked from sleepable programs, from Yonghong Song.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests, bpf: Test that dead ldx_w insns are accepted
bpf: Clear zext_dst of dead insns
bpf: Add rcu_read_lock in bpf_get_current_[ancestor_]cgroup_id() helpers
====================
Link: https://lore.kernel.org/r/20210819144904.20069-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The commit 2e6b836312 ("ASoC: intel: atom: Fix reference to PCM
buffer address") changed the reference of PCM buffer address to
substream->runtime->dma_addr as the buffer address may change
dynamically. However, I forgot that the dma_addr field is still not
set up for the CONTINUOUS buffer type (that this driver uses) yet in
5.14 and earlier kernels, and it resulted in garbage I/O. The problem
will be fixed in 5.15, but we need to address it quickly for now.
The fix is to deduce the address again from the DMA pointer with
virt_to_phys(), but from the right one, substream->runtime->dma_area.
Fixes: 2e6b836312 ("ASoC: intel: atom: Fix reference to PCM buffer address")
Reported-and-tested-by: Hans de Goede <hdegoede@redhat.com>
Cc: <stable@vger.kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/2048c6aa-2187-46bd-6772-36a4fb3c5aeb@redhat.com
Link: https://lore.kernel.org/r/20210819152945.8510-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The mic has lots of noises if mic boost is enabled. So disable mic boost
to get crystal clear audio capture.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210818144119.121738-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Two of the recent fixes for ti-sysc driver had bad interaction for a
function return value that caused one of the fixes to not work so we
need to change the return value handling. Otherwise early beagleboard
variants still have a boot issue.
-----BEGIN PGP SIGNATURE-----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=MPWH
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=NOnI
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.14/gpt12-fix-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fix for omap gpt12 timer error handling
Two of the recent fixes for ti-sysc driver had bad interaction for a
function return value that caused one of the fixes to not work so we
need to change the return value handling. Otherwise early beagleboard
variants still have a boot issue.
* tag 'omap-for-v5.14/gpt12-fix-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Fix error handling for sysc_check_active_timer()
Link: https://lore.kernel.org/r/pull-1629354796-830948@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Two legacy PCI sysfs objects "legacy_io" and "legacy_mem" were updated
to use an unified address space in the commit 636b21b501 ("PCI: Revoke
mappings like devmem"). This allows for revocations to be managed from
a single place when drivers want to take over and mmap() a /dev/mem
range.
Following the update, both of the sysfs objects should leverage the
iomem_get_mapping() function to get an appropriate address range, but
only the "legacy_io" has been correctly updated - the second attribute
seems to be using a wrong variable to pass the iomem_get_mapping()
function to.
Thus, correct the variable name used so that the "legacy_mem" sysfs
object would also correctly call the iomem_get_mapping() function.
Fixes: 636b21b501 ("PCI: Revoke mappings like devmem")
Link: https://lore.kernel.org/r/20210812132144.791268-1-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The Renoir XHCI controller apparently doesn't resume reliably with the
standard D3hot-to-D0 delay. Increase it to 20ms.
[Alex: I talked to the AMD USB hardware team and the AMD Windows team and
they are not aware of any HW errata or specific issues. The HW works fine
in Windows. I was told Windows uses a rather generous default delay of
100ms for PCI state transitions.]
Link: https://lore.kernel.org/r/20210722025858.220064-1-alexander.deucher@amd.com
Signed-off-by: Marcin Bachry <hegel666@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Prike Liang <prike.liang@amd.com>
Cc: Shyam Sundar S K <shyam-sundar.s-k@amd.com>
Add Jim Quinlan, Nicolas Saenz Julienne, and Florian Fainelli as
maintainers of the Broadcom STB PCIe controller driver.
This driver is also included in these entries:
BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE
BROADCOM BCM7XXX ARM ARCHITECTURE
which cover the Raspberry Pi specifics of the PCIe driver.
Link: https://lore.kernel.org/r/20210818225031.8502-1-jim2101024@gmail.com
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
kmalloc_array() is called to allocate memory for tx->descp. If it fails,
the function __sdma_txclean() is called:
__sdma_txclean(dd, tx);
However, in the function __sdma_txclean(), tx-descp is dereferenced if
tx->num_desc is not zero:
sdma_unmap_desc(dd, &tx->descp[0]);
To fix this possible null-pointer dereference, assign the return value of
kmalloc_array() to a local variable descp, and then assign it to tx->descp
if it is not NULL. Otherwise, go to enomem.
Fixes: 7724105686 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20210806133029.194964-1-islituo@gmail.com
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Tuo Li <islituo@gmail.com>
Tested-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Acked-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In Kconfig, references to config symbols do not use the prefix "CONFIG_".
Commit fa0cf568fd ("RDMA/irdma: Add irdma Kconfig/Makefile and remove
i40iw") selects config CONFIG_AUXILIARY_BUS in config INFINIBAND_IRDMA,
but intended to select config AUXILIARY_BUS.
Fixes: fa0cf568fd ("RDMA/irdma: Add irdma Kconfig/Makefile and remove i40iw")
Link: https://lore.kernel.org/r/20210817084158.10095-1-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The dmabuf memory registrations are missing the restrack handling and
hence do not appear in rdma tool.
Fixes: bfe0cc6eb2 ("RDMA/uverbs: Add uverbs command for dma-buf based MR registration")
Link: https://lore.kernel.org/r/20210812135607.6228-1-galpress@amazon.com
Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix the below crash when deleting a slave from the unaffiliated list
twice. First time when the slave is bound to the master and the second
when the slave is unloaded.
Fix it by checking if slave is unaffiliated (doesn't have ib device)
before removing from the list.
RIP: 0010:mlx5r_mp_remove+0x4e/0xa0 [mlx5_ib]
Call Trace:
auxiliary_bus_remove+0x18/0x30
__device_release_driver+0x177/x220
device_release_driver+0x24/0x30
bus_remove_device+0xd8/0x140
device_del+0x18a/0x3e0
mlx5_rescan_drivers_locked+0xa9/0x210 [mlx5_core]
mlx5_unregister_device+0x34/0x60 [mlx5_core]
mlx5_uninit_one+0x32/0x100 [mlx5_core]
remove_one+0x6e/0xe0 [mlx5_core]
pci_device_remove+0x36/0xa0
__device_release_driver+0x177/0x220
device_driver_detach+0x3c/0xa0
unbind_store+0x113/0x130
kernfs_fop_write_iter+0x110/0x1a0
new_sync_write+0x116/0x1a0
vfs_write+0x1ba/0x260
ksys_write+0x5f/0xe0
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 93f8244431 ("RDMA/mlx5: Convert mlx5_ib to use auxiliary bus")
Link: https://lore.kernel.org/r/17ec98989b0ba88f7adfbad68eb20bce8d567b44.1628587493.git.leonro@nvidia.com
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Hayes Wang says:
====================
r8152: fix bp settings
Fix the wrong bp settings of the firmware.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The maximum PLA bp number of RTL8153C is 16, not 8. That is, the
bp 0 ~ 15 are at 0xfc28 ~ 0xfc46, and the bp_en is at 0xfc48.
Fixes: 195aae321c ("r8152: support new chips")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The register of USB_BP2_EN is 16 bits, so we should use
ocp_write_word(), not ocp_write_byte().
Fixes: 9370f2d05a ("support request_firmware for RTL8153")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mat Martineau says:
====================
mptcp: Bug fixes
Here are two bug fixes for the net tree:
Patch 1 fixes a memory leak that could be encountered when clearing the
list of advertised MPTCP addresses.
Patch 2 fixes a protocol issue early in an MPTCP connection, to ensure
both peers correctly understand that the full MPTCP connection handshake
has completed even when the server side quickly sends an ADD_ADDR
option.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If directly after an MP_CAPABLE 3WHS, the client receives an ADD_ADDR
with HMAC from the server, it is enough to switch to a "fully
established" mode because it has received more MPTCP options.
It was then OK to enable the "fully_established" flag on the MPTCP
socket. Still, best to check if the ADD_ADDR looks valid by looking if
it contains an HMAC (no 'echo' bit). If an ADD_ADDR echo is received
while we are not in "fully established" mode, it is strange and then
we should not switch to this mode now.
But that is not enough. On one hand, the path-manager has be notified
the state has changed. On the other hand, the "fully_established" flag
on the subflow socket should be turned on as well not to re-send the
MP_CAPABLE 3rd ACK content with the next ACK.
Fixes: 84dfe3677a ("mptcp: send out dedicated ADD_ADDR packet")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In __init_el2_timers we initialize CNTHCTL_EL2.{EL1PCEN,EL1PCTEN} with a
RMW sequence, leaving all other bits UNKNOWN.
In general, we should initialize all bits in a register rather than
using an RMW sequence, since most bits are UNKNOWN out of reset, and as
new bits are added to the reigster their reset value might not result in
expected behaviour.
In the case of CNTHCTL_EL2, FEAT_ECV added a number of new control bits
in previously RES0 bits, which reset to UNKNOWN values, and may cause
issues for EL1 and EL0:
* CNTHCTL_EL2.ECV enables the CNTPOFF_EL2 offset (which itself resets to
an UNKNOWN value) at EL0 and EL1. Since the offset could reset to
distinct values across CPUs, when the control bit resets to 1 this
could break timekeeping generally.
* CNTHCTL_EL2.{EL1TVT,EL1TVCT} trap EL0 and EL1 accesses to the EL1
virtual timer/counter registers to EL2. When reset to 1, this could
cause unexpected traps to EL2.
Initializing these bits to zero avoids these problems, and all other
bits in CNTHCTL_EL2 other than EL1PCEN and EL1PCTEN can safely be reset
to zero.
This patch ensures we initialize CNTHCTL_EL2 accordingly, only setting
EL1PCEN and EL1PCTEN, and setting all other bits to zero.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oupton@google.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Oliver Upton <oupton@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210818161535.52786-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Laurent reported that STRICT_MODULE_RWX was causing intermittent crashes
on one of his systems:
kernel tried to execute exec-protected page (c008000004073278) - exploit attempt? (uid: 0)
BUG: Unable to handle kernel instruction fetch
Faulting instruction address: 0xc008000004073278
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: drm virtio_console fuse drm_panel_orientation_quirks ...
CPU: 3 PID: 44 Comm: kworker/3:1 Not tainted 5.14.0-rc4+ #12
Workqueue: events control_work_handler [virtio_console]
NIP: c008000004073278 LR: c008000004073278 CTR: c0000000001e9de0
REGS: c00000002e4ef7e0 TRAP: 0400 Not tainted (5.14.0-rc4+)
MSR: 800000004280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24002822 XER: 200400cf
...
NIP fill_queue+0xf0/0x210 [virtio_console]
LR fill_queue+0xf0/0x210 [virtio_console]
Call Trace:
fill_queue+0xb4/0x210 [virtio_console] (unreliable)
add_port+0x1a8/0x470 [virtio_console]
control_work_handler+0xbc/0x1e8 [virtio_console]
process_one_work+0x290/0x590
worker_thread+0x88/0x620
kthread+0x194/0x1a0
ret_from_kernel_thread+0x5c/0x64
Jordan, Fabiano & Murilo were able to reproduce and identify that the
problem is caused by the call to module_enable_ro() in do_init_module(),
which happens after the module's init function has already been called.
Our current implementation of change_page_attr() is not safe against
concurrent accesses, because it invalidates the PTE before flushing the
TLB and then installing the new PTE. That leaves a window in time where
there is no valid PTE for the page, if another CPU tries to access the
page at that time we see something like the fault above.
We can't simply switch to set_pte_at()/flush TLB, because our hash MMU
code doesn't handle a set_pte_at() of a valid PTE. See [1].
But we do have pte_update(), which replaces the old PTE with the new,
meaning there's no window where the PTE is invalid. And the hash MMU
version hash__pte_update() deals with synchronising the hash page table
correctly.
[1]: https://lore.kernel.org/linuxppc-dev/87y318wp9r.fsf@linux.ibm.com/
Fixes: 1f9ad21c3b ("powerpc/mm: Implement set_memory() routines")
Reported-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Murilo Opsfelder Araújo <muriloo@linux.ibm.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210818120518.3603172-1-mpe@ellerman.id.au
Commit b5efec00b6 ("powerpc/32s: Move KUEP locking/unlocking in C")
removed the 'isync' instruction after adding/removing NX bit in user
segments. The reasoning behind this change was that when setting the
NX bit we don't mind it taking effect with delay as the kernel never
executes text from userspace, and when clearing the NX bit this is
to return to userspace and then the 'rfi' should synchronise the
context.
However, it looks like on book3s/32 having a hash page table, at least
on the G3 processor, we get an unexpected fault from userspace, then
this is followed by something wrong in the verification of MSR_PR
at end of another interrupt.
This is fixed by adding back the removed isync() following update
of NX bit in user segment registers. Only do it for cores with an
hash table, as 603 cores don't exhibit that problem and the two isync
increase ./null_syscall selftest by 6 cycles on an MPC 832x.
First problem: unexpected WARN_ON() for mysterious PROTFAULT
WARNING: CPU: 0 PID: 1660 at arch/powerpc/mm/fault.c:354 do_page_fault+0x6c/0x5b0
Modules linked in:
CPU: 0 PID: 1660 Comm: Xorg Not tainted 5.13.0-pmac-00028-gb3c15b60339a #40
NIP: c001b5c8 LR: c001b6f8 CTR: 00000000
REGS: e2d09e40 TRAP: 0700 Not tainted (5.13.0-pmac-00028-gb3c15b60339a)
MSR: 00021032 <ME,IR,DR,RI> CR: 42d04f30 XER: 20000000
GPR00: c000424c e2d09f00 c301b680 e2d09f40 0000001e 42000000 00cba028 00000000
GPR08: 08000000 48000010 c301b680 e2d09f30 22d09f30 00c1fff0 00cba000 a7b7ba4c
GPR16: 00000031 00000000 00000000 00000000 00000000 00000000 a7b7b0d0 00c5c010
GPR24: a7b7b64c a7b7d2f0 00000004 00000000 c1efa6c0 00cba02c 00000300 e2d09f40
NIP [c001b5c8] do_page_fault+0x6c/0x5b0
LR [c001b6f8] do_page_fault+0x19c/0x5b0
Call Trace:
[e2d09f00] [e2d09f04] 0xe2d09f04 (unreliable)
[e2d09f30] [c000424c] DataAccess_virt+0xd4/0xe4
--- interrupt: 300 at 0xa7a261dc
NIP: a7a261dc LR: a7a253bc CTR: 00000000
REGS: e2d09f40 TRAP: 0300 Not tainted (5.13.0-pmac-00028-gb3c15b60339a)
MSR: 0000d032 <EE,PR,ME,IR,DR,RI> CR: 228428e2 XER: 20000000
DAR: 00cba02c DSISR: 42000000
GPR00: a7a27448 afa6b0e0 a74c35c0 a7b7b614 0000001e a7b7b614 00cba028 00000000
GPR08: 00020fd9 00000031 00cb9ff8 a7a273b0 220028e2 00c1fff0 00cba000 a7b7ba4c
GPR16: 00000031 00000000 00000000 00000000 00000000 00000000 a7b7b0d0 00c5c010
GPR24: a7b7b64c a7b7d2f0 00000004 00000002 0000001e a7b7b614 a7b7aff4 00000030
NIP [a7a261dc] 0xa7a261dc
LR [a7a253bc] 0xa7a253bc
--- interrupt: 300
Instruction dump:
7c4a1378 810300a0 75278410 83820298 83a300a4 553b018c 551e0036 4082038c
2e1b0000 40920228 75280800 41820220 <0fe00000> 3b600000 41920214 81420594
Second problem: MSR PR is seen unset allthough the interrupt frame shows it set
kernel BUG at arch/powerpc/kernel/interrupt.c:458!
Oops: Exception in kernel mode, sig: 5 [#1]
BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac
Modules linked in:
CPU: 0 PID: 1660 Comm: Xorg Tainted: G W 5.13.0-pmac-00028-gb3c15b60339a #40
NIP: c0011434 LR: c001629c CTR: 00000000
REGS: e2d09e70 TRAP: 0700 Tainted: G W (5.13.0-pmac-00028-gb3c15b60339a)
MSR: 00029032 <EE,ME,IR,DR,RI> CR: 42d09f30 XER: 00000000
GPR00: 00000000 e2d09f30 c301b680 e2d09f40 83440000 c44d0e68 e2d09e8c 00000000
GPR08: 00000002 00dc228a 00004000 e2d09f30 22d09f30 00c1fff0 afa6ceb4 00c26144
GPR16: 00c25fb8 00c26140 afa6ceb8 90000000 00c944d8 0000001c 00000000 00200000
GPR24: 00000000 000001fb afa6d1b4 00000001 00000000 a539a2a0 a530fd80 00000089
NIP [c0011434] interrupt_exit_kernel_prepare+0x10/0x70
LR [c001629c] interrupt_return+0x9c/0x144
Call Trace:
[e2d09f30] [c000424c] DataAccess_virt+0xd4/0xe4 (unreliable)
--- interrupt: 300 at 0xa09be008
NIP: a09be008 LR: a09bdfe8 CTR: a09bdfc0
REGS: e2d09f40 TRAP: 0300 Tainted: G W (5.13.0-pmac-00028-gb3c15b60339a)
MSR: 0000d032 <EE,PR,ME,IR,DR,RI> CR: 420028e2 XER: 20000000
DAR: a539a308 DSISR: 0a000000
GPR00: a7b90d50 afa6b2d0 a74c35c0 a0a8b690 a0a8b698 a5365d70 a4fa82a8 00000004
GPR08: 00000000 a09bdfc0 00000000 a5360000 a09bde7c 00c1fff0 afa6ceb4 00c26144
GPR16: 00c25fb8 00c26140 afa6ceb8 90000000 00c944d8 0000001c 00000000 00200000
GPR24: 00000000 000001fb afa6d1b4 00000001 00000000 a539a2a0 a530fd80 00000089
NIP [a09be008] 0xa09be008
LR [a09bdfe8] 0xa09bdfe8
--- interrupt: 300
Instruction dump:
80010024 83e1001c 7c0803a6 4bffff80 3bc00800 4bffffd0 486b42fd 4bffffcc
81430084 71480002 41820038 554a0462 <0f0a0000> 80620060 74630001 40820034
Fixes: b5efec00b6 ("powerpc/32s: Move KUEP locking/unlocking in C")
Cc: stable@vger.kernel.org # v5.13+
Reported-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4856f5574906e2aec0522be17bf3848a22b2cd0b.1629269345.git.christophe.leroy@csgroup.eu
Function "dma_map_sg" is entitled to merge adjacent entries
and return a value smaller than what was passed as "nents".
Subsequently "ib_map_mr_sg" needs to work with this value ("sg_dma_len")
rather than the original "nents" parameter ("sg_len").
This old RDS bug was exposed and reliably causes kernel panics
(using RDMA operations "rds-stress -D") on x86_64 starting with:
commit c588072bba ("iommu/vt-d: Convert intel iommu driver to the iommu ops")
Simply put: Linux 5.11 and later.
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Link: https://lore.kernel.org/r/60efc69f-1f35-529d-a7ef-da0549cad143@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently we are unable to ping a bridge on top of a felix switch which
uses the ocelot-8021q tagger. The packets are dropped on the ingress of
the user port and the 'drop_local' counter increments (the counter which
denotes drops due to no valid destinations).
Dumping the PGID tables, it becomes clear that the PGID_SRC of the user
port is zero, so it has no valid destinations.
But looking at the code, the cpu_fwd_mask (the bit mask of DSA tag_8021q
ports) is clearly missing from the forwarding mask of ports that are
under a bridge. So this has always been broken.
Looking at the version history of the patch, in v7
https://patchwork.kernel.org/project/netdevbpf/patch/20210125220333.1004365-12-olteanv@gmail.com/
the code looked like this:
/* Standalone ports forward only to DSA tag_8021q CPU ports */
unsigned long mask = cpu_fwd_mask;
(...)
} else if (ocelot->bridge_fwd_mask & BIT(port)) {
mask |= ocelot->bridge_fwd_mask & ~BIT(port);
while in v8 (the merged version)
https://patchwork.kernel.org/project/netdevbpf/patch/20210129010009.3959398-12-olteanv@gmail.com/
it looked like this:
unsigned long mask;
(...)
} else if (ocelot->bridge_fwd_mask & BIT(port)) {
mask = ocelot->bridge_fwd_mask & ~BIT(port);
So the breakage was introduced between v7 and v8 of the patch.
Fixes: e21268efbe ("net: dsa: felix: perform switch setup for tag_8021q")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20210817160425.3702809-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[why]
dcn301_calculate_wm_and_dl() causes flickering when external monitor is
connected.
This issue has been fixed before by commit 0e4c0ae59d
("drm/amdgpu/display: drop dcn301_calculate_wm_and_dl for now"), however
part of the fix was gone after commit 2cbcb78c9e ("Merge tag 'amd-drm-next-5.13-2021-03-23' of https://gitlab.freedesktop.org/agd5f/linux into drm-next").
[how]
Use dcn30_calculate_wm_and_dlg() instead as in the original fix.
Fixes: 2cbcb78c9e ("Merge tag 'amd-drm-next-5.13-2021-03-23' of https://gitlab.freedesktop.org/agd5f/linux into drm-next")
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Zhan Liu <zhan.liu@amd.com>
Tested-by: Zhan Liu <zhan.liu@amd.com>
Tested-by: Oliver Logush <oliver.logush@amd.com>
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----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=aR16
-----END PGP SIGNATURE-----
Merge tag 'for-5.14-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"One more fix for cross-rename, adding a missing check for directory
and subvolume, this could lead to a crash"
* tag 'for-5.14-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: prevent rename2 from exchanging a subvol with a directory from different parents
Hopefully the last PR for 5.14: here includes only a few regression
fixes and trivial device quirks.
-----BEGIN PGP SIGNATURE-----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=ZKV7
-----END PGP SIGNATURE-----
Merge tag 'sound-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Only a few regression fixes and trivial device quirks"
* tag 'sound-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/via: Apply runtime PM workaround for ASUS B23E
ALSA: hda: Fix hang during shutdown due to link reset
ALSA: hda/realtek: Enable 4-speaker output for Dell XPS 15 9510 laptop
ALSA: oxfw: fix functioal regression for silence in Apogee Duet FireWire
ALSA: hda - fix the 'Capture Switch' value change notifications
I had forgotten just how sensitive hackbench is to extra pipe wakeups,
and commit 3a34b13a88 ("pipe: make pipe writes always wake up
readers") ended up causing a quite noticeable regression on larger
machines.
Now, hackbench isn't necessarily a hugely meaningful benchmark, and it's
not clear that this matters in real life all that much, but as Mel
points out, it's used often enough when comparing kernels and so the
performance regression shows up like a sore thumb.
It's easy enough to fix at least for the common cases where pipes are
used purely for data transfer, and you never have any exciting poll
usage at all. So set a special 'poll_usage' flag when there is polling
activity, and make the ugly "EPOLLET has crazy legacy expectations"
semantics explicit to only that case.
I would love to limit it to just the broken EPOLLET case, but the pipe
code can't see the difference between epoll and regular select/poll, so
any non-read/write waiting will trigger the extra wakeup behavior. That
is sufficient for at least the hackbench case.
Apart from making the odd extra wakeup cases more explicitly about
EPOLLET, this also makes the extra wakeup be at the _end_ of the pipe
write, not at the first write chunk. That is actually much saner
semantics (as much as you can call any of the legacy edge-triggered
expectations for EPOLLET "sane") since it means that you know the wakeup
will happen once the write is done, rather than possibly in the middle
of one.
[ For stable people: I'm putting a "Fixes" tag on this, but I leave it
up to you to decide whether you actually want to backport it or not.
It likely has no impact outside of synthetic benchmarks - Linus ]
Link: https://lore.kernel.org/lkml/20210802024945.GA8372@xsang-OptiPlex-9020/
Fixes: 3a34b13a88 ("pipe: make pipe writes always wake up readers")
Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: Sandeep Patil <sspatil@android.com>
Tested-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit a20dcf53ea ("usb: typec: tcpm: Respond Not_Supported if no
snk_vdo"), stops tcpm_pd_data_request() calling tcpm_handle_vdm_request()
when port->nr_snk_vdo is not set. But the VDM might be intended for an
altmode-driver, in which case nr_snk_vdo does not matter.
This change breaks the forwarding of connector hotplug (HPD) events
for displayport altmode on devices which don't set nr_snk_vdo.
tcpm_pd_data_request() is the only caller of tcpm_handle_vdm_request(),
so we can move the nr_snk_vdo check to inside it, at which point we
have already looked up the altmode device so we can check for this too.
Doing this check here also ensures that vdm_state gets set to
VDM_STATE_DONE if it was VDM_STATE_BUSY, even if we end up with
responding with PD_MSG_CTRL_NOT_SUPP later.
Note that tcpm_handle_vdm_request() was already sending
PD_MSG_CTRL_NOT_SUPP in some circumstances, after moving the nr_snk_vdo
check the same error-path is now taken when that check fails. So that
we have only one error-path for this and not two. Replace the
tcpm_queue_message(PD_MSG_CTRL_NOT_SUPP) used by the existing error-path
with the more robust tcpm_pd_handle_msg() from the (now removed) second
error-path.
Fixes: a20dcf53ea ("usb: typec: tcpm: Respond Not_Supported if no snk_vdo")
Cc: stable <stable@vger.kernel.org>
Cc: Kyle Tso <kyletso@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Kyle Tso <kyletso@google.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210816154632.381968-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Compiling ppc64le_defconfig with clang-14 shows a modpost warning:
WARNING: modpost: vmlinux.o(.text+0xa74e0): Section mismatch in
reference from the function xive_setup_cpu_ipi() to the function
.init.text:xive_request_ipi()
The function xive_setup_cpu_ipi() references
the function __init xive_request_ipi().
This is often because xive_setup_cpu_ipi lacks a __init
annotation or the annotation of xive_request_ipi is wrong.
xive_request_ipi() is called from xive_setup_cpu_ipi(), which is not
__init, so xive_request_ipi() should not be marked __init. Remove the
attribute so there is no more warning.
Fixes: cbc06f051c ("powerpc/xive: Do not skip CPU-less nodes when creating the IPIs")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210816185711.21563-1-nathan@kernel.org
The symbol isn't needed outside of i915.ko.
Fixes: b30edfd8d0 ("drm/i915: Switch to LTTPR non-transparent mode link training")
Fixes: 264613b406 ("drm/i915: Disable LTTPR support when the DPCD rev < 1.4")
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210816071737.2917-1-jani.nikula@intel.com
(cherry picked from commit d8959fb338)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
ADL-P supports stream splitter on pipe B in addition to pipe A. Update
the sanity check in intel_ddi_mso_get_config() to reflect this, and
remove the check in intel_ddi_mso_configure() as redundant with
encoder->pipe_mask. Abstract the splitter pipe mask to a single point of
truth while at it to avoid similar mistakes in the future.
Fixes: 7bc188cc2c ("drm/i915/adl_p: enable MSO on pipe B")
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Swati Sharma <swati2.sharma@intel.com>
Tested-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210812132354.10885-1-jani.nikula@intel.com
(cherry picked from commit f6864b27d6)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
dispcnlunit1_cp_xosc_clkreq clock observed to be active on TGL-H platform
despite Wa_14010685332 original sequence,
thus blocks entry to deeper s0ix state.
The Tweaked Wa_14010685332 sequence fixes this issue, therefore use tweaked
Wa_14010685332 sequence for every PCH since PCH_CNP.
v2:
- removed RKL from comment and simplified condition. [Rodrigo]
Fixes: b896898c73 ("drm/i915: Tweaked Wa_14010685332 for PCHs used on gen11 platforms")
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210810113112.31739-2-anshuman.gupta@intel.com
(cherry picked from commit 8b46cc6577)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This fixes improper iotlb invalidation in intel_pasid_tear_down_entry().
When a PASID was used as nested mode, released and reused, the following
error message will appear:
[ 180.187556] Unexpected page request in Privilege Mode
[ 180.187565] Unexpected page request in Privilege Mode
[ 180.279933] Unexpected page request in Privilege Mode
[ 180.279937] Unexpected page request in Privilege Mode
Per chapter 6.5.3.3 of VT-d spec 3.3, when tear down a pasid entry, the
software should use Domain selective IOTLB flush if the PGTT of the pasid
entry is SL only or Nested, while for the pasid entries whose PGTT is FL
only or PT using PASID-based IOTLB flush is enough.
Fixes: 2cd1311a26 ("iommu/vt-d: Add set domain DOMAIN_ATTR_NESTING attr")
Signed-off-by: Kumar Sanjay K <sanjay.k.kumar@intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Tested-by: Yi Sun <yi.y.sun@intel.com>
Link: https://lore.kernel.org/r/20210817042425.1784279-1-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210817124321.1517985-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
A PASID reference is increased whenever a device is bound to an mm (and
its PASID) successfully (i.e. the device's sdev user count is increased).
But the reference is not dropped every time the device is unbound
successfully from the mm (i.e. the device's sdev user count is decreased).
The reference is dropped only once by calling intel_svm_free_pasid() when
there isn't any device bound to the mm. intel_svm_free_pasid() drops the
reference and only frees the PASID on zero reference.
Fix the issue by dropping the PASID reference and freeing the PASID when
no reference on successful unbinding the device by calling
intel_svm_free_pasid() .
Fixes: 4048377414 ("iommu/vt-d: Use iommu_sva_alloc(free)_pasid() helpers")
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20210813181345.1870742-1-fenghua.yu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210817124321.1517985-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Syzbot reported uninit-value in asix_mdio_read(). The problem was in
missing error handling. asix_read_cmd() should initialize passed stack
variable smsr, but it can fail in some cases. Then while condidition
checks possibly uninit smsr variable.
Since smsr is uninitialized stack variable, driver can misbehave,
because smsr will be random in case of asix_read_cmd() failure.
Fix it by adding error handling and just continue the loop instead of
checking uninit value.
Added helper function for checking Host_En bit, since wrong loop was used
in 4 functions and there is no need in copy-pasting code parts.
Cc: Robert Foss <robert.foss@collabora.com>
Fixes: d9fe64e511 ("net: asix: Add in_pm parameter")
Reported-by: syzbot+a631ec9e717fb0423053@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
