A make defconfig && make savedefconfig was performed for each
configuration.
Most changes are due to options moving around, except for the following
which are due to changing defaults:
- SECCOMP is enabled by default as of commit 282a181b1a ("seccomp:
Move config option SECCOMP to arch/Kconfig") in v5.9
- The soc drivers ASPEED_LPC_CTRL, ASPEED_LPC_SNOOP and ASPEED_P2A_CTRL
are enabled by default when the aspeed platform is enabled, as of
commit 592693a1f8 ("soc: aspeed: Improve kconfig") in v5.9
- The ZBOOT_ROM_TEXT/BSS values fall out of the defconfig as of
commit 39c3e30456 ("ARM: 8984/1: Kconfig: set default
ZBOOT_ROM_TEXT/BSS value to 0x0") in v5.8
- I2C_MUX is selected by MEDIA_SUBDRV_AUTOSELECT, probably as of about
v5.8. It was in the config as it is required bt the PCA I2C muxes
that enabled it
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210819065203.2620911-5-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
These two devices are part of the AST2400 and the drivers have support
for that version of the soc.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210819065203.2620911-4-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
SLAB_FREELIST_HARDENED can protect from freelist overwrite attacks with
really small overhead.
It works best with the SLUB allocator, so make SLUB the default by
removing SLAB=y.
total used free shared buff/cache available
SLAB 425596 44065.3+/-220 311099+/-3800 14864+/-3900 70432+/-3700 352767+/-3900
SLUB 425592 44225.3+/-280 313275+/-600 12132+/-3.3 68092+/-530 355295+/-280
These figures are the average memory usage from three boots of each
option in qemu, running the Romulus userspace. The output is from
free(1), reported in kilobytes.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210819065203.2620911-2-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
In the 5.7 merge window the media kconfig was restructued. For most
platforms these changes set CONFIG_MEDIA_SUPPORT_FILTER=y which keeps
unwanted drivers disabled.
The exception is if a config sets EMBEDDED or EXPERT (see b0cd4fb276).
In that case the filter is set to =n, causing a bunch of DVB tuner drivers
(MEDIA_TUNER_*) to be accidentally enabled. This was noticed as it blew
out the build time for the Aspeed defconfigs.
Enabling the filter means the Aspeed config also needs to set
CONFIG_MEDIA_PLATFORM_SUPPORT=y in order to have the CONFIG_VIDEO_ASPEED
driver enabled.
Fixes: 06b93644f4 ("media: Kconfig: add an option to filter in/out platform drivers")
Fixes: b0cd4fb276 ("media: Kconfig: on !EMBEDDED && !EXPERT, enable driver filtering")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Cc: stable@vger.kernel.org
CC: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The PCA muxes now depend on I2C_MUX. SPI si now required by SPI-NOR.
Add the eMMC driver, and remove the FSI SBEFIFO which is not used on AST2400
systems.
The remaining changes are cleanups from regenerating the defconfig.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joel Stanley <joel@jms.id.au>
This addresses some assumptions made by systemd about having multiple
routing table support in the kernel. systemd-networkd will try and
provision mutliple routing tables + policies and will silently break
neighbor advertisement responses due to policy configurations on a
single table.
It also adds support for SLAAC based router settings and faster
duplicate address detection.
Signed-off-by: William A. Kennington III <wak@google.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add new drivers to the ASPEED G4 and G5 defconfigs, and to the armv5
multi defconfig.
-----BEGIN PGP SIGNATURE-----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=YrwI
-----END PGP SIGNATURE-----
Merge tag 'aspeed-5.3-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/defconfig
ASPEED device tree updates for 5.3
Add new drivers to the ASPEED G4 and G5 defconfigs, and to the armv5
multi defconfig.
* tag 'aspeed-5.3-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: configs: multi_v5: Add more ASPEED devices
ARM: configs: aspeed: Add new drivers
Signed-off-by: Olof Johansson <olof@lixom.net>
This enables a handful of new drivers that have recently landed:
- Video caputre, for doing BMC virtual keyboard-video-mouse
- DRM driver for the BMC's own graphics device
- Error detection and correction
- P2A control, a BMC feature for moving data between the host and BMC
- RTC driver
Signed-off-by: Joel Stanley <joel@jms.id.au>
Remove the CONFIG_UEVENT_HELPER_PATH because:
1. It is disabled since commit 1be01d4a57 ("driver: base: Disable
CONFIG_UEVENT_HELPER by default") as its dependency (UEVENT_HELPER) was
made default to 'n',
2. It is not recommended (help message: "This should not be used today
[...] creates a high system load") and was kept only for ancient
userland,
3. Certain userland specifically requests it to be disabled (systemd
README: "Legacy hotplug slows down the system and confuses udev").
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Core changes:
- The gpiolib MMIO driver has been enhanced to handle two direction
registers, i.e. one register to set lines as input and one register
to set lines as output. It turns out some silicon engineer thinks
the ability to configure a line as input and output at the same
time makes sense, this can be debated but includes a lot of analog
electronics reasoning, and the registers are there and need to
be handled consistently. Unsurprisingly, we enforce the lines to
be either inputs or outputs in such schemes.
- Send in the proper argument value to .set_config() dispatched to
the pin control subsystem. Nobody used it before, now someone
does, so fix it to work as expected.
- The ACPI gpiolib portions can now handle pin bias setting (pull up
or pull down). This has been in the ACPI spec for years and we
finally have it properly integrated with Linux GPIOs. It was based
on an observation from Andy Schevchenko that Thomas Petazzoni's
changes to the core for biasing the PCA950x GPIO expander actually
happen to fit hand-in-glove with what the ACPI core needed.
Such nice synergies happen sometimes.
New drivers:
- A new driver for the Mellanox BlueField GPIO controller. This is
using 64bit MMIO registers and can configure lines as inputs
and outputs at the same time and after improving the MMIO library
we handle it just fine. Interesting.
- A new IXP4xx proper gpiochip driver with hierarchical interrupts
should be coming in from the ARM SoC tree as well.
Driver enhancements:
- The PCA053x driver handles the CAT9554 GPIO expander.
- The PCA053x driver handles the NXP PCAL6416 GPIO expander.
- Wake-up support on PCA053x GPIO lines.
- OMAP now does a nice asynchronous IRQ handling on wake-ups by
letting everything wake up on edges, and this makes runtime PM
work as expected too.
Misc:
- Several cleanups such as devres fixes.
- Get rid of some languager comstructs that cause problems when
compiling with LLVMs clang.
- Documentation review and update.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJc1olZAAoJEEEQszewGV1zEU4P/RmTf3hG8xmNPS3MDTmR6gAy
/YJOXjXBf3CD/dmEAyyaNLnUQismrtRNvHSoEGbno7gkU+htzp9UfUJkj6+HIXs2
RpF+Hi78HzZNDxGWuBLu6OZolpmBtx+sRKOhHk/XfNS45qd1FgXWDuulzsYa9Xsr
hYMXdtdv9wY/vcc68q1rtKAbzlu5ZNCa3Zj1iNOr/XQt3Nl2BW66hGLgjK4mOvgx
fJy4rFXuDIMfDvo69U1Opz2b39sfE7XMhfZS/MOgg4yEV9zGRgDoI1tyMcTqGb8Q
8LQbp5dXkP+3dJQB8tgbu3Vk4WC1Rd/pmIli5sMgsk0HYQ6XegfT6HJKozSmwN9r
0s8jKlrocWZvdPo1aJwQgtRS56t2rFWcrcRye8bLqxkkW5cYIq9CwkE8USwB31Kv
PFpoOwRuCtj0gkCxf7WIEcC5NAkYPow3K1KPdk3E0Si6I3pj0NqqlaAD0JAlkC2V
aPq3xbTuFCAdmcADEt2Z+dUJ7WIs5Y9oQgosMAx+A2AD4K3QDBMu3pZsT6SCu4XZ
mK0eWJi9/CvOj/s7bA0BEJVxQA+p8KYsNRBOULg/8aAOqGcLnSydQjqrxDTE8YrL
xmmRG7i7ht0B9CchZuIB5hqdvjbCgvcVa5OnCUDfLxE0GdCx8iJ9y9OrsMXbabYq
8FcPDo1N38cTYLnLqvKI
=rhto
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull gpio updates from Linus Walleij:
"This is the bulk of the GPIO changes for the v5.2 kernel cycle. A bit
later than usual because I was ironing out my own mistakes. I'm
holding some stuff back for the next kernel as a result, and this
should be a healthy and well tested batch.
Core changes:
- The gpiolib MMIO driver has been enhanced to handle two direction
registers, i.e. one register to set lines as input and one register
to set lines as output. It turns out some silicon engineer thinks
the ability to configure a line as input and output at the same
time makes sense, this can be debated but includes a lot of analog
electronics reasoning, and the registers are there and need to be
handled consistently. Unsurprisingly, we enforce the lines to be
either inputs or outputs in such schemes.
- Send in the proper argument value to .set_config() dispatched to
the pin control subsystem. Nobody used it before, now someone does,
so fix it to work as expected.
- The ACPI gpiolib portions can now handle pin bias setting (pull up
or pull down). This has been in the ACPI spec for years and we
finally have it properly integrated with Linux GPIOs. It was based
on an observation from Andy Schevchenko that Thomas Petazzoni's
changes to the core for biasing the PCA950x GPIO expander actually
happen to fit hand-in-glove with what the ACPI core needed. Such
nice synergies happen sometimes.
New drivers:
- A new driver for the Mellanox BlueField GPIO controller. This is
using 64bit MMIO registers and can configure lines as inputs and
outputs at the same time and after improving the MMIO library we
handle it just fine. Interesting.
- A new IXP4xx proper gpiochip driver with hierarchical interrupts
should be coming in from the ARM SoC tree as well.
Driver enhancements:
- The PCA053x driver handles the CAT9554 GPIO expander.
- The PCA053x driver handles the NXP PCAL6416 GPIO expander.
- Wake-up support on PCA053x GPIO lines.
- OMAP now does a nice asynchronous IRQ handling on wake-ups by
letting everything wake up on edges, and this makes runtime PM work
as expected too.
Misc:
- Several cleanups such as devres fixes.
- Get rid of some languager comstructs that cause problems when
compiling with LLVMs clang.
- Documentation review and update"
* tag 'gpio-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (85 commits)
gpio: Update documentation
docs: gpio: convert docs to ReST and rename to *.rst
gpio: sch: Remove write-only core_base
gpio: pxa: Make two symbols static
gpiolib: acpi: Respect pin bias setting
gpiolib: acpi: Add acpi_gpio_update_gpiod_lookup_flags() helper
gpiolib: acpi: Set pin value, based on bias, more accurately
gpiolib: acpi: Change type of dflags
gpiolib: Introduce GPIO_LOOKUP_FLAGS_DEFAULT
gpiolib: Make use of enum gpio_lookup_flags consistent
gpiolib: Indent entry values of enum gpio_lookup_flags
gpio: pca953x: add support for pca6416
dt-bindings: gpio: pca953x: document the nxp,pca6416
gpio: pca953x: add pcal6416 to the of_device_id table
gpio: gpio-omap: Remove conditional pm_runtime handling for GPIO interrupts
gpio: gpio-omap: configure edge detection for level IRQs for idle wakeup
tracing: stop making gpio tracing configurable
gpio: pca953x: Configure wake-up path when wake-up is enabled
gpio: of: Optimize quirk checks
gpio: mmio: Drop bgpio_dir_inverted
...
gpio tracing was made configurable in 4.4-rc1 (commit ddd70280bf
("tracing: gpio: Add Kconfig option for enabling/disabling trace
events")). Since then it is the only event type that can be compiled
conditionally. Given that there is only little overhead I don't
understand the reasoning and I was annoyed more than once that gpio
events were not available without recompiling.
So drop the Kconfig symbol and make gpio events available
unconditionally.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Currently support for 64-bit sector_t and blkcnt_t is optional on 32-bit
architectures. These types are required to support block device and/or
file sizes larger than 2 TiB, and have generally defaulted to on for
a long time. Enabling the option only increases the i386 tinyconfig
size by 145 bytes, and many data structures already always use
64-bit values for their in-core and on-disk data structures anyway,
so there should not be a large change in dynamic memory usage either.
Dropping this option removes a somewhat weird non-default config that
has cause various bugs or compiler warnings when actually used.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This turns on the FSI-attached I2C bus driver, and the ColdFire
offloaded FSI master which are new to 4.19.
Signed-off-by: Joel Stanley <joel@jms.id.au>
- Enable new support:
hardware random number generator
FSI and client drivers
DRM GFX driver
- Disable unwanted features:
ARM_APPENDED_DTB
ARM_ATAG_DTB_COMPAT
BLK_DEV_RAM
- Sync G4 and G5 with OpenBMC configurations
BLK_DEV_LOOP, for updater mechanic
CRYPTO_HMAC, for libsdbus features
CRYPTO_SHA256
CRYPTO_USER_API_HASH
- Enable security related features:
SLAB_FREELIST_RANDOM
STRICT_KERNEL_RW
CC_STACKPROTECTOR_STRONG
HARDENED_USERCOPY
FORTIFY_SOURCE
- Increase kernel log buffer size
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Now that the vhub driver is upstream and the device-trees
updated, let's enable this by default.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
CONFIG_IRQ_DOMAIN_DEBUG is similar to CONFIG_GENERIC_IRQ_DEBUGFS,
just with less information.
Spring cleanup time.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Yang Shunyong <shunyong.yang@hxt-semitech.com>
Link: https://lkml.kernel.org/r/20180117142647.23622-1-marc.zyngier@arm.com
These drivers have been recently upstreamed, so add them to the
defconfigs.
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
This is required for the SMC controller mapping windows on the AHB
Bus.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
- LPC Host Controller
- Pulse Width Modulation and Tachometer
- Analog to Digital converter
These three new drivers for the Aspeed SoCs will appear in 4.12. This
defconfig is based on next-20170406.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Developers can develop and users can test with this config against an
OpenBMC userspace. It turns off debugging features to ensure network
performance is high.
Tested-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Defconfig additions, removals, etc. Almost all of them just turn on
drivers that we want on some platform, usually after the driver
has been merged into mainline.
There is now a new defconfig file for tango4.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIVAwUAWK8G/GCrR//JCVInAQLA3w/9GoJ+BvdlrieCdKj5ax9sDVMi11u5yDJP
NtoGM4RZlTFNr7bau8lbmJepH7K0ZLOWKfVisdvp3ykUszDkqqfRbOm7cmG8rQM7
K1BDDb0Mo0O6UgYAlgBM+zdhPEYZxSLYwSb9bAN4HlEkvuFsCwVURIN057IXP6zV
Hmb+a1nBmQAeXeVpxlBYQBV5HBXtbzNGUgXHAdBE6pO6uBC/8iNpzwaopP80eBr0
WXpqOe1ehW33ICeYKJPB13YwdfHNVnNuhMNTWGcCgBfXKBcSxWW72WsmmkO4sGFC
JtKz5revh1KySCyGmmi/sFKB0FIJkHF1VERQlmGRlh/6RBrLL5rqgXHr2HMgtbTy
rlFPPNWwl6DQl3xVg8UYg7Tz+k1HpHznUWaU4ng3MO8daHWnVEb06/TbO4SlDq+o
DEieUJDDTdAV01jGLuAU3AVOdBZKBY44NPp0d5EunzwaDPRY381XrECvlxxTuxq8
wxTTBYhL7rpt51d5ru59qwTqY6P0CiF4SeWNEth9Oh0Uyp0Vdj4Stkf4V6g647An
3jZg4NtKuFljzYVXkNH1//DTMNnCSUyaKbcbLzhV0D2aD5Pf2o2911tbu9Q/oEJT
PhISwCxsZ1tNccslmNGTr/G2hNihJqV7FNOrkfIEjddRzGhL1ot13BtUiEIZdA9Z
8F8BBga2ifI=
=noKQ
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"Defconfig additions, removals, etc. Almost all of them just turn on
drivers that we want on some platform, usually after the driver has
been merged into mainline.
There is now a new defconfig file for tango4"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits)
ARM: multi_v7_defconfig: enable pstore configs
ARM: multi_v7_defconfig: enable some newly added crypto modules
ARM: davinci_all_defconfig: enable SATA modules
arm64: defconfig: enable CONFIG_MTD_NAND and CONFIG_MTD_NAND_DENALI_DT
arm64: defconfig: enable CONFIG_MTD_BLOCK
ARM: Import tango4_defconfig
ARM: omap2plus_defconfig: Enable support for RTC M41T80
ARM: omap2plus_defconfig: Enable support for micrell phys
ARM: vf610m4: defconfig: enable EXT4 filesystem
ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6
arm64: defconfig: Enable NUMA and NUMA_BALANCING
arm64: defconfig: enable SMMUv3 config
ARM: davinci_all_defconfig: enable iio
ARM: Keystone: Enable ARCH_HAS_RESET_CONTROLLER
ARM: configs: stm32: Add RTC support in STM32 defconfig
ARM: defconfig: qcom: add APQ8060 DragonBoard devices
ARM: qcom_defconfig: enable thermal sensors
ARM: qcom_defconfig: add ahci configs
ARM: qcom_defconfig: add pcie and atl1c ethernet configs
ARM: qcom_defconfig: add usb related configs
...
Both of these options are poorly named. The features they provide are
necessary for system security and should not be considered debug only.
Change the names to CONFIG_STRICT_KERNEL_RWX and
CONFIG_STRICT_MODULE_RWX to better describe what these options do.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Acked-by: Jessica Yu <jeyu@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
We have upstream support for ftgmac100 ethernet with NCSI, GPIO, pinmux,
and IPMI BT. Enable these for both g4 and g5 platforms.
Signed-off-by: Joel Stanley <joel@jms.id.au>
The patch that this was preparing for made it into neither v4.7 nor
v4.8, so we should back this out as well to avoid the opposite
warning:
arch/arm/configs/aspeed_g5_defconfig:62:warning: symbol value '1' invalid for PRINTK_TIME
arch/arm/configs/aspeed_g4_defconfig:61:warning: symbol value '1' invalid for PRINTK_TIME
Sorry for not catching this earlier.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 0ef659a300 ("ARM: aspeed: adapt defconfigs for new CONFIG_PRINTK_TIME")
Cc: stable@vger.kernel.org # v4.7
Commit 94ea9c7a579f ("lib, switch CONFIG_PRINTK_TIME to int") changes
the type of CONFIG_PRINTK_TIME and adapts all existing defconfig files,
while we add two new defconfig files with d0bc3483da ("arm/configs:
Add Aspeed defconfig"), with the old type.
This changes the two new defconfig files to match the other ones.
As a result, we get harmless warnings for the arm-soc defconfig
branch by itself, but everything will work when 4.7-rc1 is out.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
