The MAC Merge layer (IEEE 802.3-2018 clause 99) does all the heavy
lifting for Frame Preemption (IEEE 802.1Q-2018 clause 6.7.2), a TSN
feature for minimizing latency.
Preemptible traffic is different on the wire from normal traffic in
incompatible ways. If we send a preemptible packet and the link partner
doesn't support preemption, it will drop it as an error frame and we
will never know. The MAC Merge layer has a control plane of its own,
which can be manipulated (using ethtool) in order to negotiate this
capability with the link partner (through LLDP).
Actually the TLV format for LLDP solves this problem only partly,
because both partners only advertise:
- if they support preemption (RX and TX)
- if they have enabled preemption (TX)
so we cannot tell the link partner what to do - we cannot force it to
enable reception of our preemptible packets.
That is fully solved by the verification feature, where the local device
generates some small probe frames which look like preemptible frames
with no useful content, and the link partner is obliged to respond to
them if it supports the standard. If the verification times out, we know
that preemption isn't active in our TX direction on the link.
Having clarified the definition, this selftest exercises the manual
(ethtool) configuration path of 2 link partners (with and without
verification), and the LLDP code path, using the openlldp project.
The test also verifies the TX activity of the MAC Merge layer by
sending traffic through a traffic class configured as preemptible
(using mqprio). There isn't a good way to make this really portable
(user space cannot find out how many traffic classes there are for
a device), but I chose num_tc 4 here, that should work reasonably well.
I also know that some devices (stmmac) only permit TXQ0 to be
preemptible, so this is why PREEMPTIBLE_PRIO was strategically chosen
as 0. Even if other hardware is more configurable, this test should
cover the baseline.
This is not really a "forwarding" selftest, but I put it near the other
"ethtool" selftests.
$ ./ethtool_mm.sh eno0 swp0
TEST: Manual configuration with verification: eno0 to swp0 [ OK ]
TEST: Manual configuration with verification: swp0 to eno0 [ OK ]
TEST: Manual configuration without verification: eno0 to swp0 [ OK ]
TEST: Manual configuration without verification: swp0 to eno0 [ OK ]
TEST: Manual configuration with failed verification: eno0 to swp0 [ OK ]
TEST: Manual configuration with failed verification: swp0 to eno0 [ OK ]
TEST: LLDP [ OK ]
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a selftest that configures metadata tunnel encapsulation using the TC
"tunnel_key" action: it includes a test case for setting "nofrag" flag.
Example output:
# selftests: net/forwarding: tc_tunnel_key.sh
# TEST: tunnel_key nofrag (skip_hw) [ OK ]
# INFO: Could not test offloaded functionality
ok 1 selftests: net/forwarding: tc_tunnel_key.sh
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a suite covering mcast_n_groups and mcast_max_groups bridge features.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a selftests that includes the following test cases:
1. Configuration tests. Both valid and invalid configurations are
tested across all entry types (e.g., L2, IPv4).
2. Forwarding tests. Both host and port group entries are tested across
all entry types.
3. Interaction between user installed MDB entries and IGMP / MLD control
packets.
Example output:
INFO: # Host entries configuration tests
TEST: Common host entries configuration tests (IPv4) [ OK ]
TEST: Common host entries configuration tests (IPv6) [ OK ]
TEST: Common host entries configuration tests (L2) [ OK ]
INFO: # Port group entries configuration tests - (*, G)
TEST: Common port group entries configuration tests (IPv4 (*, G)) [ OK ]
TEST: Common port group entries configuration tests (IPv6 (*, G)) [ OK ]
TEST: IPv4 (*, G) port group entries configuration tests [ OK ]
TEST: IPv6 (*, G) port group entries configuration tests [ OK ]
INFO: # Port group entries configuration tests - (S, G)
TEST: Common port group entries configuration tests (IPv4 (S, G)) [ OK ]
TEST: Common port group entries configuration tests (IPv6 (S, G)) [ OK ]
TEST: IPv4 (S, G) port group entries configuration tests [ OK ]
TEST: IPv6 (S, G) port group entries configuration tests [ OK ]
INFO: # Port group entries configuration tests - L2
TEST: Common port group entries configuration tests (L2 (*, G)) [ OK ]
TEST: L2 (*, G) port group entries configuration tests [ OK ]
INFO: # Forwarding tests
TEST: IPv4 host entries forwarding tests [ OK ]
TEST: IPv6 host entries forwarding tests [ OK ]
TEST: L2 host entries forwarding tests [ OK ]
TEST: IPv4 port group "exclude" entries forwarding tests [ OK ]
TEST: IPv6 port group "exclude" entries forwarding tests [ OK ]
TEST: IPv4 port group "include" entries forwarding tests [ OK ]
TEST: IPv6 port group "include" entries forwarding tests [ OK ]
TEST: L2 port entries forwarding tests [ OK ]
INFO: # Control packets tests
TEST: IGMPv3 MODE_IS_INCLUE tests [ OK ]
TEST: MLDv2 MODE_IS_INCLUDE tests [ OK ]
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test is only concerned with host MDB entries and not with MDB
entries as a whole. Rename the test to reflect that.
Subsequent patches will add a more general test that will contain the
test cases for host MDB entries and remove the current test.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When using the Makefile from tools/testing/selftests/net/forwarding/
all tests should be installed. Add no_forwarding.sh to the list of
"to be installed tests" where it has been missing so far.
Fixes: 476a4f05d9 ("selftests: forwarding: add a no_forwarding.sh test")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When using the Makefile from tools/testing/selftests/net/forwarding/
all tests should be installed. Add local_termination.sh to the list of
"to be installed tests" where it has been missing so far.
Fixes: 90b9566aa5 ("selftests: forwarding: add a test for local_termination.sh")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tests that permanent mdb entries can be added/deleted on ports with state down.
Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix missing backslash, introduced in f62c5acc80. Causes all tests to
not be installed.
Fixes: f62c5acc80 ("selftests/net/forwarding: add missing tests to Makefile")
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Acked-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20220518151630.2747773-1-troglobit@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a selftest that uses an IPIP topology and tests that L3 HW stats
reflect the traffic in the tunnel.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When generating the selftests to another folder, the fixed tests are
missing as they are not in Makefile, e.g.
make -C tools/testing/selftests/ install \
TARGETS="net/forwarding" INSTALL_PATH=/tmp/kselftests
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Boiler plate for testing static mdb entries. This first test verifies
adding and removing host mdb entries for all supported types: IPv4,
IPv6, and MAC multicast.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
These tests check that the basic locked port feature works, so that
no 'host' can communicate (ping) through a locked port unless the
MAC address of the 'host' interface is in the forwarding database of
the bridge.
Signed-off-by: Hans Schultz <schultz.hans+netdev@gmail.com>
Acked-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit bdb7cc643f ("ipv6: Count interface receive statistics on the
ingress netdev") does not work when ip6_forward() executes on the skbs
with vrf-enslaved netdev. Use IP6CB(skb)->iif to get to the right one.
Add a selftest script to verify.
Fixes: bdb7cc643f ("ipv6: Count interface receive statistics on the ingress netdev")
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20211014130845.410602-1-ssuryaextr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Connect hosts H1 and H2 using two intermediate encapsulation routers
(LER1 and LER2). These routers encapsulate traffic from the hosts,
including the original Ethernet header, into MPLS.
Use ping to test reachability between H1 and H2.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://lore.kernel.org/r/625f5c1aafa3a8085f8d3e082d680a82e16ffbaa.1606918980.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The lib files should not be defined as TEST_PROGS, or we will run them
in run_kselftest.sh.
Also remove ethtool_lib.sh exec permission.
Fixes: 81573b18f2 ("selftests/net/forwarding: add Makefile to install tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add missing Makefile for net/forwarding tests and include it to
the targets list, otherwise forwarding tests are not installed
in case of cross-compilation.
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>