Commit Graph

187 Commits

Author SHA1 Message Date
Chengming Zhou 217b613a53 blk-mq: update driver tags request table when start request
Now we update driver tags request table in blk_mq_get_driver_tag(),
so the driver that support queue_rqs() have to update that inflight
table by itself.

Move it to blk_mq_start_request(), which is a better place where
we setup the deadline for request timeout check. And it's just
where the request becomes inflight.

Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230913151616.3164338-5-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-09-22 08:52:13 -06:00
Chengming Zhou b8643d6826 blk-mq: account active requests when get driver tag
There is a limit that batched queue_rqs() can't work on shared tags
queue, since the account of active requests can't be done there.

Now we account the active requests only in blk_mq_get_driver_tag(),
which is not the time we get driver tag actually (with none elevator).

To support batched queue_rqs() on shared tags queue, we move the
account of active requests to where we get the driver tag:

1. none elevator: blk_mq_get_tags() and blk_mq_get_tag()
2. other elevator: __blk_mq_alloc_driver_tag()

This is clearer and match with the unaccount side, which just happen
when we put the driver tag.

The other good point is that we don't need RQF_MQ_INFLIGHT trick
anymore, which used to avoid double account of flush request.
Now we only account when actually get the driver tag, so all is good.
We will remove RQF_MQ_INFLIGHT in the next patch.

Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230913151616.3164338-2-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-09-22 08:52:13 -06:00
Yu Kuai 4f1731df60 blk-mq: fix potential io hang by wrong 'wake_batch'
In __blk_mq_tag_busy/idle(), updating 'active_queues' and calculating
'wake_batch' is not atomic:

t1:			t2:
_blk_mq_tag_busy	blk_mq_tag_busy
inc active_queues
// assume 1->2
			inc active_queues
			// 2 -> 3
			blk_mq_update_wake_batch
			// calculate based on 3
blk_mq_update_wake_batch
/* calculate based on 2, while active_queues is actually 3. */

Fix this problem by protecting them wih 'tags->lock', this is not a hot
path, so performance should not be concerned. And now that all writers
are inside the lock, switch 'actives_queues' from atomic to unsigned
int.

Fixes: 180dccb0db ("blk-mq: fix tag_get wait task can't be awakened")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230610023043.2559121-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-12 09:55:53 -06:00
Christoph Hellwig 9a67aa52a4 blk-mq: don't use the requeue list to queue flush commands
Currently both requeues of commands that were already sent to the driver
and flush commands submitted from the flush state machine share the same
requeue_list struct request_queue, despite requeues doing head
insertions and flushes not.  Switch to using two separate lists instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230519044050.107790-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-05-19 19:52:42 -06:00
Christoph Hellwig 360f264834 blk-mq: defer to the normal submission path for non-flush flush commands
If blk_insert_flush decides that a command does not need to use the
flush state machine, return false and let blk_mq_submit_bio handle
it the normal way (including using an I/O scheduler) instead of doing
a bypass insert.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230519044050.107790-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-05-19 19:52:29 -06:00
Christoph Hellwig dd6216bb16 blk-mq: make sure elevator callbacks aren't called for passthrough request
In case of q->elevator, passthrough request can still be marked as
RQF_ELV, so some elevator callbacks will be called for them.

Fix this by splitting RQF_SCHED_TAGS, which is set for all requests that
are issued on a queue that uses an I/O scheduler, and RQF_USE_SCHED for
non-flush, non-passthrough requests on such a queue.

Roughly based on two different patches from
Ming Lei <ming.lei@redhat.com>.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230518053101.760632-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-05-18 19:42:54 -06:00
Linus Torvalds 9dd6956b38 for-6.4/block-2023-04-21
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmRCvcIQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpk+JEACj01t7Xen2+Razagu3aTx9tmRGFnTNR3MY
 raFG6B1TADk1TgCWWa2C4Dj67SOispPLm8hbIcOxqB1UscDWCCwjmnr/debADFzW
 Ap6shv/IRwVGmDp+F7ocYas0ynwooOJg4WJTwkSKz2o4m4p3vzlwAKi4fLiSjbXp
 gJTrA7WEvDOVjzajlTFUtjr8rc6PdunbGm25cPIufAxUEhvttYex2VbVqjDmfNsE
 8tyyk9RWbe4AY/ZYaGXVn4yQ/CgL/sXFkVc5noRXNfAQ/K3CVLQrFLJ3JlwUHpiA
 xXBor21TUWCZEo33Y2G5NConAYqE7etoPTkaTDO3/aZ+dAMFyhC/WAYLz1KZGMh1
 +g1fDX1QKEd40H2lfDXvqF1ob7Ut8EzUx+gvBXcc3/AiRpJ5rjfOcj6LPUMUqQJk
 nucLLFTiMKecnDMBERbvixqbaTyrjvkFEj2wYJvgj1LKXAd+x/bj8SGajs9r88Nb
 9YT9ai/+Yl7Ppfb67rCgXJU7oNZQSAQ2H+X/l2jbiqImOgq1u/45AmINnbanS7HH
 Y1I8pbH45AcnCgkJRoQwrNX3BnTOTBJ+D/4Fl4b8jsihq0D3UtwCwPCObHP4LW9S
 MUNPhP3tUuYsAgXqX80+Sao6SYvXDwnbWOM+LOaaZXgjb1ndwDUZXpto8Ra8WB1u
 8kM6s6ZR7g==
 =W1Zb
 -----END PGP SIGNATURE-----

Merge tag 'for-6.4/block-2023-04-21' of git://git.kernel.dk/linux

Pull block updates from Jens Axboe:

 - drbd patches, bringing us closer to unifying the out-of-tree version
   and the in tree one (Andreas, Christoph)

 - support for auto-quiesce for the s390 dasd driver (Stefan)

 - MD pull request via Song:
      - md/bitmap: Optimal last page size (Jon Derrick)
      - Various raid10 fixes (Yu Kuai, Li Nan)
      - md: add error_handlers for raid0 and linear (Mariusz Tkaczyk)

 - NVMe pull request via Christoph:
      - Drop redundant pci_enable_pcie_error_reporting (Bjorn Helgaas)
      - Validate nvmet module parameters (Chaitanya Kulkarni)
      - Fence TCP socket on receive error (Chris Leech)
      - Fix async event trace event (Keith Busch)
      - Minor cleanups (Chaitanya Kulkarni, zhenwei pi)
      - Fix and cleanup nvmet Identify handling (Damien Le Moal,
        Christoph Hellwig)
      - Fix double blk_mq_complete_request race in the timeout handler
        (Lei Yin)
      - Fix irq locking in nvme-fcloop (Ming Lei)
      - Remove queue mapping helper for rdma devices (Sagi Grimberg)

 - use structured request attribute checks for nbd (Jakub)

 - fix blk-crypto race conditions between keyslot management (Eric)

 - add sed-opal support for reading read locking range attributes
   (Ondrej)

 - make fault injection configurable for null_blk (Akinobu)

 - clean up the request insertion API (Christoph)

 - clean up the queue running API (Christoph)

 - blkg config helper cleanups (Tejun)

 - lazy init support for blk-iolatency (Tejun)

 - various fixes and tweaks to ublk (Ming)

 - remove hybrid polling. It hasn't really been useful since we got
   async polled IO support, and these days we don't support sync polled
   IO at all (Keith)

 - misc fixes, cleanups, improvements (Zhong, Ondrej, Colin, Chengming,
   Chaitanya, me)

* tag 'for-6.4/block-2023-04-21' of git://git.kernel.dk/linux: (118 commits)
  nbd: fix incomplete validation of ioctl arg
  ublk: don't return 0 in case of any failure
  sed-opal: geometry feature reporting command
  null_blk: Always check queue mode setting from configfs
  block: ublk: switch to ioctl command encoding
  blk-mq: fix the blk_mq_add_to_requeue_list call in blk_kick_flush
  block, bfq: Fix division by zero error on zero wsum
  fault-inject: fix build error when FAULT_INJECTION_CONFIGFS=y and CONFIGFS_FS=m
  block: store bdev->bd_disk->fops->submit_bio state in bdev
  block: re-arrange the struct block_device fields for better layout
  md/raid5: remove unused working_disks variable
  md/raid10: don't call bio_start_io_acct twice for bio which experienced read error
  md/raid10: fix memleak of md thread
  md/raid10: fix memleak for 'conf->bio_split'
  md/raid10: fix leak of 'r10bio->remaining' for recovery
  md/raid10: don't BUG_ON() in raise_barrier()
  md: fix soft lockup in status_resync
  md: add error_handlers for raid0 and linear
  md: Use optimal I/O size for last bitmap page
  md: Fix types in sb writer
  ...
2023-04-26 12:52:58 -07:00
Christoph Hellwig b12e5c6c75 blk-mq: pass a flags argument to blk_mq_add_to_requeue_list
Replace the boolean at_head argument with the same flags that are already
passed to blk_mq_insert_request.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-21-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-13 06:52:30 -06:00
Christoph Hellwig 2b5976134b blk-mq: pass a flags argument to blk_mq_request_bypass_insert
Replace the boolean at_head argument with the same flags that are already
passed to blk_mq_insert_request.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-19-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-13 06:52:30 -06:00
Christoph Hellwig 710fa3789e blk-mq: pass a flags argument to blk_mq_insert_request
Replace the at_head bool with a flags argument that so far only contains
a single BLK_MQ_INSERT_AT_HEAD value.  This makes it much easier to grep
for head insertions into the blk-mq dispatch queues.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-13 06:52:30 -06:00
Christoph Hellwig 214a441805 blk-mq: don't kick the requeue_list in blk_mq_add_to_requeue_list
blk_mq_add_to_requeue_list takes a bool parameter to control how to kick
the requeue list at the end of the function.  Move the call to
blk_mq_kick_requeue_list to the callers that want it instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-13 06:52:30 -06:00
Christoph Hellwig 2394395cd5 blk-mq: don't run the hw_queue from blk_mq_request_bypass_insert
blk_mq_request_bypass_insert takes a bool parameter to control how to run
the queue at the end of the function.  Move the blk_mq_run_hw_queue call
to the callers that want it instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-13 06:52:30 -06:00
Christoph Hellwig a88db1e000 blk-mq: fold __blk_mq_insert_request into blk_mq_insert_request
There is no good point in keeping the __blk_mq_insert_request around
for two function calls and a singler caller.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-13 06:52:29 -06:00
Christoph Hellwig 05a9311770 blk-mq: fold blk_mq_sched_insert_requests into blk_mq_dispatch_plug_list
blk_mq_dispatch_plug_list is the only caller of
blk_mq_sched_insert_requests, and it makes sense to just fold it there
as blk_mq_sched_insert_requests isn't specific to I/O schedulers despite
the name.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-13 06:52:29 -06:00
Christoph Hellwig 94aa228c2a blk-mq: move more logic into blk_mq_insert_requests
Move all logic related to the direct insert (including the call to
blk_mq_run_hw_queue) into blk_mq_insert_requests to streamline the code
flow up a bit, and to allow marking blk_mq_try_issue_list_directly
static.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-13 06:52:29 -06:00
Christoph Hellwig 90110e04f2 blk-mq: include <linux/blk-mq.h> in block/blk-mq.h
block/blk-mq.h needs various definitions from <linux/blk-mq.h>,
include it there instead of relying on the source files to include
both.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-13 06:52:29 -06:00
Christoph Hellwig bebe84ebee blk-mq: remove blk-mq-tag.h
blk-mq-tag.h is always included by blk-mq.h, and causes recursive
inclusion hell with further changes.  Just merge it into blk-mq.h
instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-13 06:52:29 -06:00
Chris Leech 00e885efcf blk-mq: fix "bad unlock balance detected" on q->srcu in __blk_mq_run_dispatch_ops
The 'q' parameter of the macro __blk_mq_run_dispatch_ops may not be one
local variable, such as, it is rq->q, then request queue pointed by
this variable could be changed to another queue in case of
BLK_MQ_F_TAG_QUEUE_SHARED after 'dispatch_ops' returns, then
'bad unlock balance' is triggered.

Fixes the issue by adding one local variable for doing srcu lock/unlock.

Fixes: 2a904d0085 ("blk-mq: remove hctx_lock and hctx_unlock")
Cc: Marco Patalano <mpatalan@redhat.com>
Signed-off-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230310010913.1014789-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-14 19:20:55 -06:00
Christoph Hellwig 80bd4a7aab blk-mq: move the srcu_struct used for quiescing to the tagset
All I/O submissions have fairly similar latencies, and a tagset-wide
quiesce is a fairly common operation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221101150050.3510-12-hch@lst.de
[axboe: fix whitespace]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-02 08:35:34 -06:00
Pankaj Raghav 8cafdb5ab9 block: adapt blk_mq_plug() to not plug for writes that require a zone lock
The current implementation of blk_mq_plug() disables plugging for all
operations that involves a transfer to the device as we just check if
the last bit in op_is_write() function.

Modify blk_mq_plug() to disable plugging only for REQ_OP_WRITE and
REQ_OP_WRITE_ZEROS as they might require a zone lock.

Suggested-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220929074745.103073-2-p.raghav@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-29 07:45:47 -06:00
Bart Van Assche 16458cf3bd block: Use the new blk_opf_t type
Use the new blk_opf_t type for arguments and variables that represent
request flags or a bitwise combination of a request operation and
request flags. Rename the function arguments and also a structure member
that hold a request operation and flags from 'rw' into 'opf'.

This patch does not change any functionality.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-7-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-14 12:14:30 -06:00
Christoph Hellwig 6deacb3bfa block: simplify blk_mq_plug
Drop the unused q argument, and invert the check to move the exception
into a branch and the regular path as the normal return.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-06 06:46:25 -06:00
Christoph Hellwig edd1dbc83b block: use bdev_is_zoned instead of open coding it
Use bdev_is_zoned in all places where a block_device is available instead
of open coding it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-06 06:46:25 -06:00
Christoph Hellwig 8682b92e5a blk-mq: cleanup disk sysfs registration
Pass a gendisk to the sysfs register/unregister functions and give
them descriptive names.  Also move the unregistration helper next
to the one doing the registration.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220628171850.1313069-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-28 11:32:42 -06:00
Christoph Hellwig eaa870f975 blk-mq: rename blk_mq_sysfs_{,un}register
Add a _hctx postfix to better describe what the functions do, match
the debugfs equivalents and release the old names for functions that
should be using them.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220628171850.1313069-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-28 11:32:42 -06:00
Bart Van Assche 7e923f40a4 block: Rename a blk_mq_map_queue() argument
Before the introduction of blk_mq_get_hctx_type(), blk_mq_map_queue()
only used the flags from its second argument. Since the introduction of
blk_mq_get_hctx_type(), blk_mq_map_queue() uses both the operation and
the flags encoded in that argument. Rename the second argument of
blk_mq_map_queue() to make this clear.

Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220615225549.1054905-3-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-27 06:29:11 -06:00
Ming Lei 4e5cc99e1e blk-mq: manage hctx map via xarray
First code becomes more clean by switching to xarray from plain array.

Second use-after-free on q->queue_hw_ctx can be fixed because
queue_for_each_hw_ctx() may be run when updating nr_hw_queues is
in-progress. With this patch, q->hctx_table is defined as xarray, and
this structure will share same lifetime with request queue, so
queue_for_each_hw_ctx() can use q->hctx_table to lookup hctx reliably.

Reported-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220308073219.91173-7-ming.lei@redhat.com
[axboe: fix blk_mq_hw_ctx forward declaration]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-08 19:39:38 -07:00
Ming Lei 41adf531e3 blk-mq: don't run might_sleep() if the operation needn't blocking
The operation protected via blk_mq_run_dispatch_ops() in blk_mq_run_hw_queue
won't sleep, so don't run might_sleep() for it.

Reported-and-tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-06 09:40:42 -07:00
Ming Lei bcc330f42f blk-mq: pass request queue to blk_mq_run_dispatch_ops
We have switched to allocate srcu into request queue, so it is fine
to pass request queue to blk_mq_run_dispatch_ops().

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20211203131534.3668411-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-03 14:51:29 -07:00
Ming Lei 704b914f15 blk-mq: move srcu from blk_mq_hw_ctx to request_queue
In case of BLK_MQ_F_BLOCKING, per-hctx srcu is used to protect dispatch
critical area. However, this srcu instance stays at the end of hctx, and
it often takes standalone cacheline, often cold.

Inside srcu_read_lock() and srcu_read_unlock(), WRITE is always done on
the indirect percpu variable which is allocated from heap instead of
being embedded, srcu->srcu_idx is read only in srcu_read_lock(). It
doesn't matter if srcu structure stays in hctx or request queue.

So switch to per-request-queue srcu for protecting dispatch, and this
way simplifies quiesce a lot, not mention quiesce is always done on the
request queue wide.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20211203131534.3668411-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-03 14:51:29 -07:00
Ming Lei 2a904d0085 blk-mq: remove hctx_lock and hctx_unlock
Remove hctx_lock and hctx_unlock, and add one helper of
blk_mq_run_dispatch_ops() to run code block defined in dispatch_ops
with rcu/srcu read held.

Compared with hctx_lock()/hctx_unlock():

1) remove 2 branch to 1, so we just need to check
(hctx->flags & BLK_MQ_F_BLOCKING) once when running one dispatch_ops

2) srcu_idx needn't to be touched in case of non-blocking

3) might_sleep_if() can be moved to the blocking branch

Also put the added blk_mq_run_dispatch_ops() in private header, so that
the following patch can use it out of blk-mq.c.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20211203131534.3668411-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-03 14:51:29 -07:00
Christoph Hellwig 06c8c691e2 block: move request based cloning helpers to blk-mq.c
Keep all the request based code together.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20211117061404.331732-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-29 06:34:50 -07:00
Ming Lei 2a19b28f79 blk-mq: cancel blk-mq dispatch work in both blk_cleanup_queue and disk_release()
For avoiding to slow down queue destroy, we don't call
blk_mq_quiesce_queue() in blk_cleanup_queue(), instead of delaying to
cancel dispatch work in blk_release_queue().

However, this way has caused kernel oops[1], reported by Changhui. The log
shows that scsi_device can be freed before running blk_release_queue(),
which is expected too since scsi_device is released after the scsi disk
is closed and the scsi_device is removed.

Fixes the issue by canceling blk-mq dispatch work in both blk_cleanup_queue()
and disk_release():

1) when disk_release() is run, the disk has been closed, and any sync
dispatch activities have been done, so canceling dispatch work is enough to
quiesce filesystem I/O dispatch activity.

2) in blk_cleanup_queue(), we only focus on passthrough request, and
passthrough request is always explicitly allocated & freed by
its caller, so once queue is frozen, all sync dispatch activity
for passthrough request has been done, then it is enough to just cancel
dispatch work for avoiding any dispatch activity.

[1] kernel panic log
[12622.769416] BUG: kernel NULL pointer dereference, address: 0000000000000300
[12622.777186] #PF: supervisor read access in kernel mode
[12622.782918] #PF: error_code(0x0000) - not-present page
[12622.788649] PGD 0 P4D 0
[12622.791474] Oops: 0000 [#1] PREEMPT SMP PTI
[12622.796138] CPU: 10 PID: 744 Comm: kworker/10:1H Kdump: loaded Not tainted 5.15.0+ #1
[12622.804877] Hardware name: Dell Inc. PowerEdge R730/0H21J3, BIOS 1.5.4 10/002/2015
[12622.813321] Workqueue: kblockd blk_mq_run_work_fn
[12622.818572] RIP: 0010:sbitmap_get+0x75/0x190
[12622.823336] Code: 85 80 00 00 00 41 8b 57 08 85 d2 0f 84 b1 00 00 00 45 31 e4 48 63 cd 48 8d 1c 49 48 c1 e3 06 49 03 5f 10 4c 8d 6b 40 83 f0 01 <48> 8b 33 44 89 f2 4c 89 ef 0f b6 c8 e8 fa f3 ff ff 83 f8 ff 75 58
[12622.844290] RSP: 0018:ffffb00a446dbd40 EFLAGS: 00010202
[12622.850120] RAX: 0000000000000001 RBX: 0000000000000300 RCX: 0000000000000004
[12622.858082] RDX: 0000000000000006 RSI: 0000000000000082 RDI: ffffa0b7a2dfe030
[12622.866042] RBP: 0000000000000004 R08: 0000000000000001 R09: ffffa0b742721334
[12622.874003] R10: 0000000000000008 R11: 0000000000000008 R12: 0000000000000000
[12622.881964] R13: 0000000000000340 R14: 0000000000000000 R15: ffffa0b7a2dfe030
[12622.889926] FS:  0000000000000000(0000) GS:ffffa0baafb40000(0000) knlGS:0000000000000000
[12622.898956] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[12622.905367] CR2: 0000000000000300 CR3: 0000000641210001 CR4: 00000000001706e0
[12622.913328] Call Trace:
[12622.916055]  <TASK>
[12622.918394]  scsi_mq_get_budget+0x1a/0x110
[12622.922969]  __blk_mq_do_dispatch_sched+0x1d4/0x320
[12622.928404]  ? pick_next_task_fair+0x39/0x390
[12622.933268]  __blk_mq_sched_dispatch_requests+0xf4/0x140
[12622.939194]  blk_mq_sched_dispatch_requests+0x30/0x60
[12622.944829]  __blk_mq_run_hw_queue+0x30/0xa0
[12622.949593]  process_one_work+0x1e8/0x3c0
[12622.954059]  worker_thread+0x50/0x3b0
[12622.958144]  ? rescuer_thread+0x370/0x370
[12622.962616]  kthread+0x158/0x180
[12622.966218]  ? set_kthread_struct+0x40/0x40
[12622.970884]  ret_from_fork+0x22/0x30
[12622.974875]  </TASK>
[12622.977309] Modules linked in: scsi_debug rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs sunrpc dm_multipath intel_rapl_msr intel_rapl_common dell_wmi_descriptor sb_edac rfkill video x86_pkg_temp_thermal intel_powerclamp dcdbas coretemp kvm_intel kvm mgag200 irqbypass i2c_algo_bit rapl drm_kms_helper ipmi_ssif intel_cstate intel_uncore syscopyarea sysfillrect sysimgblt fb_sys_fops pcspkr cec mei_me lpc_ich mei ipmi_si ipmi_devintf ipmi_msghandler acpi_power_meter drm fuse xfs libcrc32c sr_mod cdrom sd_mod t10_pi sg ixgbe ahci libahci crct10dif_pclmul crc32_pclmul crc32c_intel libata megaraid_sas ghash_clmulni_intel tg3 wdat_wdt mdio dca wmi dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_debug]

Reported-by: ChanghuiZhong <czhong@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20211116014343.610501-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-15 19:22:13 -07:00
Ming Lei b637108a40 blk-mq: fix filesystem I/O request allocation
submit_bio_checks() may update bio->bi_opf, so we have to initialize
blk_mq_alloc_data.cmd_flags with bio->bi_opf after submit_bio_checks()
returns when allocating new request.

In case of using cached request, fallback to allocate new request if
cached rq isn't compatible with the incoming bio, otherwise change
rq->cmd_flags with incoming bio->bi_opf.

Fixes: 900e080752 ("block: move queue enter logic into blk_mq_submit_bio()")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-12 09:31:13 -07:00
Jens Axboe ecaf97f474 block: use enum type for blk_mq_alloc_data->rq_flags
kernel test robot reports that we now trigger some sparse warnings:

block/blk-mq.h:169:32: sparse: sparse: restricted req_flags_t degrades to integer
block/blk-mq.h:169:32: sparse: sparse: restricted req_flags_t degrades to integer
block/blk-mq.h:169:32: sparse: sparse: restricted req_flags_t degrades to integer

which is due to ->rq_flags being an unsigned int, rather than the
stronger type req_flags_t enum.

Change the type to req_flags_t to silence this warning.

Fixes: 56f8da642b ("block: add rq_flags to struct blk_mq_alloc_data")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-09 19:19:15 -07:00
Ming Lei 3b87c6ea67 blk-mq: update hctx->nr_active in blk_mq_end_request_batch()
In case of shared tags and none io sched, batched completion still may
be run into, and hctx->nr_active is accounted when getting driver tag,
so it has to be updated in blk_mq_end_request_batch().

Otherwise, hctx->nr_active may become same with queue depth, then
hctx_may_queue() always return false, then io hang is caused.

Fixes the issue by updating the counter in batched way.

Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: f794f3351f ("block: add support for blk_mq_end_request_batch()")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20211102153619.3627505-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-03 09:27:57 -06:00
Jens Axboe 56f8da642b block: add rq_flags to struct blk_mq_alloc_data
There's a hole here we can use, and it's faster to set this earlier
rather than need to check q->elevator multiple times.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20211019153300.623322-2-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-27 08:43:15 -06:00
Christoph Hellwig dbb6f764a0 blk-mq: move blk_mq_flush_plug_list to block/blk-mq.h
This helper is internal to the block layer.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211020144119.142582-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-20 09:56:11 -06:00
Jens Axboe a808a9d545 block: inline fast path of driver tag allocation
If we don't use an IO scheduler or have shared tags, then we don't need
to call into this external function at all. This saves ~2% for such
a setup.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-19 15:18:25 -06:00
Jens Axboe 5a72e899ce block: add a struct io_comp_batch argument to fops->iopoll()
struct io_comp_batch contains a list head and a completion handler, which
will allow completions to more effciently completed batches of IO.

For now, no functional changes in this patch, we just define the
io_comp_batch structure and add the argument to the file_operations iopoll
handler.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18 14:40:40 -06:00
Jens Axboe 9a14d6ce41 block: remove debugfs blk_mq_ctx dispatched/merged/completed attributes
These were added as part of early days debugging for blk-mq, and they
are not really useful anymore. Rather than spend cycles updating them,
just get rid of them.

As a bonus, this shrinks the per-cpu software queue size from 256b
to 192b. That's a whole cacheline less.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18 14:39:48 -06:00
Christoph Hellwig 3e08773c38 block: switch polling to be bio based
Replace the blk_poll interface that requires the caller to keep a queue
and cookie from the submissions with polling based on the bio.

Polling for the bio itself leads to a few advantages:

 - the cookie construction can made entirely private in blk-mq.c
 - the caller does not need to remember the request_queue and cookie
   separately and thus sidesteps their lifetime issues
 - keeping the device and the cookie inside the bio allows to trivially
   support polling BIOs remapping by stacking drivers
 - a lot of code to propagate the cookie back up the submission path can
   be removed entirely.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Mark Wunderlich <mark.wunderlich@intel.com>
Link: https://lore.kernel.org/r/20211012111226.760968-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18 06:17:36 -06:00
Christoph Hellwig 6ce913fe3e block: rename REQ_HIPRI to REQ_POLLED
Unlike the RWF_HIPRI userspace ABI which is intentionally kept vague,
the bio flag is specific to the polling implementation, so rename and
document it properly.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Tested-by: Mark Wunderlich <mark.wunderlich@intel.com>
Link: https://lore.kernel.org/r/20211012111226.760968-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18 06:17:36 -06:00
Jens Axboe 47c122e35d block: pre-allocate requests if plug is started and is a batch
The caller typically has a good (or even exact) idea of how many requests
it needs to submit. We can make the request/tag allocation a lot more
efficient if we just allocate N requests/tags upfront when we queue the
first bio from the batch.

Provide a new plug start helper that allows the caller to specify how many
IOs are expected. This sets plug->nr_ios, and we can use that for smarter
request allocation. The plug provides a holding spot for requests, and
request allocation will check it before calling into the normal request
allocation path.

The blk_finish_plug() is called, check if there are unused requests and
free them. This should not happen in normal operations. The exception is
if we get merging, then we may be left with requests that need freeing
when done.

This raises the per-core performance on my setup from ~5.8M to ~6.1M
IOPS.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18 06:17:03 -06:00
John Garry 079a2e3e86 blk-mq: Change shared sbitmap naming to shared tags
Now that shared sbitmap support really means shared tags, rename symbols
to match that.

Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1633429419-228500-15-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18 06:17:03 -06:00
John Garry e155b0c238 blk-mq: Use shared tags for shared sbitmap support
Currently we use separate sbitmap pairs and active_queues atomic_t for
shared sbitmap support.

However a full sets of static requests are used per HW queue, which is
quite wasteful, considering that the total number of requests usable at
any given time across all HW queues is limited by the shared sbitmap depth.

As such, it is considerably more memory efficient in the case of shared
sbitmap to allocate a set of static rqs per tag set or request queue, and
not per HW queue.

So replace the sbitmap pairs and active_queues atomic_t with a shared
tags per tagset and request queue, which will hold a set of shared static
rqs.

Since there is now no valid HW queue index to be passed to the blk_mq_ops
.init and .exit_request callbacks, pass an invalid index token. This
changes the semantics of the APIs, such that the callback would need to
validate the HW queue index before using it. Currently no user of shared
sbitmap actually uses the HW queue index (as would be expected).

Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/1633429419-228500-13-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18 06:17:03 -06:00
John Garry 645db34e50 blk-mq: Refactor and rename blk_mq_free_map_and_{requests->rqs}()
Refactor blk_mq_free_map_and_requests() such that it can be used at many
sites at which the tag map and rqs are freed.

Also rename to blk_mq_free_map_and_rqs(), which is shorter and matches the
alloc equivalent.

Suggested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/1633429419-228500-12-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18 06:17:03 -06:00
John Garry 63064be150 blk-mq: Add blk_mq_alloc_map_and_rqs()
Add a function to combine allocating tags and the associated requests,
and factor out common patterns to use this new function.

Some function only call blk_mq_alloc_map_and_rqs() now, but more
functionality will be added later.

Also make blk_mq_alloc_rq_map() and blk_mq_alloc_rqs() static since they
are only used in blk-mq.c, and finally rename some functions for
conciseness and consistency with other function names:
- __blk_mq_alloc_map_and_{request -> rqs}()
- blk_mq_alloc_{map_and_requests -> set_map_and_rqs}()

Suggested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/1633429419-228500-11-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18 06:17:03 -06:00
Jan Kara fd2ef39cc9 blk: Fix lock inversion between ioc lock and bfqd lock
Lockdep complains about lock inversion between ioc->lock and bfqd->lock:

bfqd -> ioc:
 put_io_context+0x33/0x90 -> ioc->lock grabbed
 blk_mq_free_request+0x51/0x140
 blk_put_request+0xe/0x10
 blk_attempt_req_merge+0x1d/0x30
 elv_attempt_insert_merge+0x56/0xa0
 blk_mq_sched_try_insert_merge+0x4b/0x60
 bfq_insert_requests+0x9e/0x18c0 -> bfqd->lock grabbed
 blk_mq_sched_insert_requests+0xd6/0x2b0
 blk_mq_flush_plug_list+0x154/0x280
 blk_finish_plug+0x40/0x60
 ext4_writepages+0x696/0x1320
 do_writepages+0x1c/0x80
 __filemap_fdatawrite_range+0xd7/0x120
 sync_file_range+0xac/0xf0

ioc->bfqd:
 bfq_exit_icq+0xa3/0xe0 -> bfqd->lock grabbed
 put_io_context_active+0x78/0xb0 -> ioc->lock grabbed
 exit_io_context+0x48/0x50
 do_exit+0x7e9/0xdd0
 do_group_exit+0x54/0xc0

To avoid this inversion we change blk_mq_sched_try_insert_merge() to not
free the merged request but rather leave that upto the caller similarly
to blk_mq_sched_try_merge(). And in bfq_insert_requests() we make sure
to free all the merged requests after dropping bfqd->lock.

Fixes: aee69d78de ("block, bfq: introduce the BFQ-v0 I/O scheduler as an extra scheduler")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210623093634.27879-3-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-24 18:43:55 -06:00
Jan Kara 613471549f block: Do not pull requests from the scheduler when we cannot dispatch them
Provided the device driver does not implement dispatch budget accounting
(which only SCSI does) the loop in __blk_mq_do_dispatch_sched() pulls
requests from the IO scheduler as long as it is willing to give out any.
That defeats scheduling heuristics inside the scheduler by creating
false impression that the device can take more IO when it in fact
cannot.

For example with BFQ IO scheduler on top of virtio-blk device setting
blkio cgroup weight has barely any impact on observed throughput of
async IO because __blk_mq_do_dispatch_sched() always sucks out all the
IO queued in BFQ. BFQ first submits IO from higher weight cgroups but
when that is all dispatched, it will give out IO of lower weight cgroups
as well. And then we have to wait for all this IO to be dispatched to
the disk (which means lot of it actually has to complete) before the
IO scheduler is queried again for dispatching more requests. This
completely destroys any service differentiation.

So grab request tag for a request pulled out of the IO scheduler already
in __blk_mq_do_dispatch_sched() and do not pull any more requests if we
cannot get it because we are unlikely to be able to dispatch it. That
way only single request is going to wait in the dispatch list for some
tag to free.

Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210603104721.6309-1-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-03 12:01:27 -06:00