For the conversion of the NOHZ timer placement to a pull at expiry time
model it's required to have separate expiry times for the pinned and the
non-pinned (movable) timers. Therefore struct timer_events is introduced.
No functional change
Originally-by: Richard Cochran (linutronix GmbH) <richardcochran@gmail.com>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240221090548.36600-12-anna-maria@linutronix.de
Separate the storage space for pinned timers. Deferrable timers (doesn't
matter if pinned or non pinned) are still enqueued into their own base.
This is preparatory work for changing the NOHZ timer placement from a push
at enqueue time to a pull at expiry time model.
Originally-by: Richard Cochran (linutronix GmbH) <richardcochran@gmail.com>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240221090548.36600-11-anna-maria@linutronix.de
Split the logic for getting next timer interrupt (no matter of recalculated
or already stored in base->next_expiry) into a separate function named
next_timer_interrupt(). Make it available to local call sites only.
No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240221090548.36600-10-anna-maria@linutronix.de
The logic for raising a softirq the way it is implemented right now, is
readable for two timer bases. When increasing the number of timer bases,
code gets harder to read. With the introduction of the timer migration
hierarchy, there will be three timer bases.
Therefore restructure the code to use a loop. No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240221090548.36600-9-anna-maria@linutronix.de
When adding a timer to the timer wheel using add_timer_on(), it is an
implicitly pinned timer. With the timer pull at expiry time model in place,
the TIMER_PINNED flag is required to make sure timers end up in proper
base.
Set the TIMER_PINNED flag unconditionally when add_timer_on() is executed.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240221090548.36600-8-anna-maria@linutronix.de
The implementation of the NOHZ pull at expiry model will change the timer
bases per CPU. Timers, that have to expire on a specific CPU, require the
TIMER_PINNED flag. If the CPU doesn't matter, the TIMER_PINNED flag must be
dropped. This is required for call sites which use the timer alternately as
pinned and not pinned timer like workqueues do.
Therefore use add_timer_global() in __queue_delayed_work() for non-bound
delayed work to make sure the TIMER_PINNED flag is dropped.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20240221090548.36600-7-anna-maria@linutronix.de
A timer might be used as a pinned timer (using add_timer_on()) and later on
as non-pinned timer using add_timer(). When the "NOHZ timer pull at expiry
model" is in place, the TIMER_PINNED flag is required to be used whenever a
timer needs to expire on a dedicated CPU. Otherwise the flag must not be
set if expiration on a dedicated CPU is not required.
add_timer_on()'s behavior will be changed during the preparation patches
for the "NOHZ timer pull at expiry model" to unconditionally set the
TIMER_PINNED flag. To be able to clear/ set the flag when queueing a
timer, two variants of add_timer() are introduced.
This is a preparatory step and has no functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240221090548.36600-6-anna-maria@linutronix.de
When tick is stopped also the timer base is_idle flag is set. When
reentering timer_base_try_to_set_idle() with the tick stopped, there is no
need to check whether the timer base needs to be set idle again. When a
timer was enqueued in the meantime, this is already handled by the
tick_nohz_next_event() call which was executed before
tick_nohz_stop_tick().
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240221090548.36600-5-anna-maria@linutronix.de
The timer base is marked idle when get_next_timer_interrupt() is
executed. But the decision whether the tick will be stopped and whether the
system is able to go idle is done later. When the timer bases is marked
idle and a new first timer is enqueued remote an IPI is raised. Even if it
is not required because the tick is not stopped and the timer base is
evaluated again at the next tick.
To prevent this, the timer base is marked idle in tick_nohz_stop_tick() and
get_next_timer_interrupt() is streamlined by only looking for the next timer
interrupt. All other work is postponed to timer_base_try_to_set_idle() which is
called by tick_nohz_stop_tick(). timer_base_try_to_set_idle() never resets
timer_base::is_idle state. This is done when the tick is restarted via
tick_nohz_restart_sched_tick().
With this, tick_sched::tick_stopped and timer_base::is_idle are always in
sync. So there is no longer the need to execute timer_clear_idle() in
tick_nohz_idle_retain_tick(). This was required before, as
tick_nohz_next_event() set timer_base::is_idle even if the tick would not be
stopped. So timer_clear_idle() is only executed, when timer base is idle. So the
check whether timer base is idle, is now no longer required as well.
While at it fix some nearby whitespace damage as well.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240221090548.36600-4-anna-maria@linutronix.de
Split out get_next_timer_interrupt() to be able to extend it and make it
reusable for other call sites.
No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240221090548.36600-3-anna-maria@linutronix.de
get_next_timer_interrupt() contains two parts for the next timer interrupt
calculation. Those two parts are separated by forwarding the base
clock. But the second part does not depend on the forwarded base
clock.
Therefore restructure get_next_timer_interrupt() to keep things together
which belong together.
No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240221090548.36600-2-anna-maria@linutronix.de
On a 8-socket server the TSC is wrongly marked as 'unstable' and disabled
during boot time on about one out of 120 boot attempts:
clocksource: timekeeping watchdog on CPU227: wd-tsc-wd excessive read-back delay of 153560ns vs. limit of 125000ns,
wd-wd read-back delay only 11440ns, attempt 3, marking tsc unstable
tsc: Marking TSC unstable due to clocksource watchdog
TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
sched_clock: Marking unstable (119294969739, 159204297)<-(125446229205, -5992055152)
clocksource: Checking clocksource tsc synchronization from CPU 319 to CPUs 0,99,136,180,210,542,601,896.
clocksource: Switched to clocksource hpet
The reason is that for platform with a large number of CPUs, there are
sporadic big or huge read latencies while reading the watchog/clocksource
during boot or when system is under stress work load, and the frequency and
maximum value of the latency goes up with the number of online CPUs.
The cCurrent code already has logic to detect and filter such high latency
case by reading the watchdog twice and checking the two deltas. Due to the
randomness of the latency, there is a low probabilty that the first delta
(latency) is big, but the second delta is small and looks valid. The
watchdog code retries the readouts by default twice, which is not
necessarily sufficient for systems with a large number of CPUs.
There is a command line parameter 'max_cswd_read_retries' which allows to
increase the number of retries, but that's not user friendly as it needs to
be tweaked per system. As the number of required retries is proportional to
the number of online CPUs, this parameter can be calculated at runtime.
Scale and enlarge the number of retries according to the number of online
CPUs and remove the command line parameter completely.
[ tglx: Massaged change log and comments ]
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jin Wang <jin1.wang@intel.com>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20240221060859.1027450-1-feng.tang@intel.com
'days' is a s64 (from div_s64), and so should use a %lld specifier.
This was found by extending KUnit's assertion macros to use gcc's
__printf attribute.
Fixes: 2760105516 ("time: Improve performance of time64_to_tm()")
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240221092728.1281499-5-davidgow@google.com
There is already a generic union definition for vdso_data_store in the vdso
datapage header.
Use this definition to prevent code duplication.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20240219153939.75719-11-anna-maria@linutronix.de
There is already a generic union definition for vdso_data_store in the vdso
datapage header.
Use this definition to prevent code duplication.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240219153939.75719-10-anna-maria@linutronix.de
There is already a generic union definition for vdso_data_store in vdso
datapage header.
Use this definition to prevent code duplication.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240219153939.75719-9-anna-maria@linutronix.de
There is already a generic union definition for vdso_data_store in the vdso
datapage header.
Use this definition to prevent code duplication.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20240219153939.75719-8-anna-maria@linutronix.de
There is already a generic union definition for vdso_data_store in the vdso
datapage header.
Use this definition to prevent code duplication.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240220085212.6547-1-anna-maria@linutronix.de
There is already a generic union definition for vdso_data_store in vdso
datapage header.
Use this definition to prevent code duplication.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240219153939.75719-6-anna-maria@linutronix.de
The vDSO data page "union vdso_data_store" is defined in an ARM specific
header file and also defined in several other places.
Move the definition from the ARM header file into the generic vdso datapage
header to make it also usable for others and to prevent code duplication.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240219153939.75719-5-anna-maria@linutronix.de
vdso/datapage.h includes the architecture specific vdso/data.h header
file. So there is no need to do it also the other way round and including
the generic vdso/datapage.h header file inside the architecture specific
data.h header file.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20240219153939.75719-3-anna-maria@linutronix.de
There's a conflict between this recent upstream fix:
dad6a09f31 ("hrtimer: Report offline hrtimer enqueue")
and a pending commit in the timers tree:
1a4729ecaf ("hrtimers: Move hrtimer base related definitions into hrtimer_defs.h")
Resolve it by applying the upstream fix to the new <linux/hrtimer_defs.h> header.
Conflict:
include/linux/hrtimer.h
Semantic conflict:
include/linux/hrtimer_defs.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
So far, get_device_system_crosststamp() unconditionally passes
system_counterval.cycles to timekeeping_cycles_to_ns(). But when
interpolating system time (do_interp == true), system_counterval.cycles is
before tkr_mono.cycle_last, contrary to the timekeeping_cycles_to_ns()
expectations.
On x86, CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE will mitigate on
interpolating, setting delta to 0. With delta == 0, xtstamp->sys_monoraw
and xtstamp->sys_realtime are then set to the last update time, as
implicitly expected by adjust_historical_crosststamp(). On other
architectures, the resulting nonsense xtstamp->sys_monoraw and
xtstamp->sys_realtime corrupt the xtstamp (ts) adjustment in
adjust_historical_crosststamp().
Fix this by deriving xtstamp->sys_monoraw and xtstamp->sys_realtime from
the last update time when interpolating, by using the local variable
"cycles". The local variable already has the right value when
interpolating, unlike system_counterval.cycles.
Fixes: 2c756feb18 ("time: Add history to cross timestamp interface supporting slower devices")
Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/r/20231218073849.35294-4-peter.hilber@opensynergy.com
The cycle_between() helper checks if parameter test is in the open interval
(before, after). Colloquially speaking, this also applies to the counter
wrap-around special case before > after. get_device_system_crosststamp()
currently uses cycle_between() at the first call site to decide whether to
interpolate for older counter readings.
get_device_system_crosststamp() has the following problem with
cycle_between() testing against an open interval: Assume that, by chance,
cycles == tk->tkr_mono.cycle_last (in the following, "cycle_last" for
brevity). Then, cycle_between() at the first call site, with effective
argument values cycle_between(cycle_last, cycles, now), returns false,
enabling interpolation. During interpolation,
get_device_system_crosststamp() will then call cycle_between() at the
second call site (if a history_begin was supplied). The effective argument
values are cycle_between(history_begin->cycles, cycles, cycles), since
system_counterval.cycles == interval_start == cycles, per the assumption.
Due to the test against the open interval, cycle_between() returns false
again. This causes get_device_system_crosststamp() to return -EINVAL.
This failure should be avoided, since get_device_system_crosststamp() works
both when cycles follows cycle_last (no interpolation), and when cycles
precedes cycle_last (interpolation). For the case cycles == cycle_last,
interpolation is actually unneeded.
Fix this by changing cycle_between() into timestamp_in_interval(), which
now checks against the closed interval, rather than the open interval.
This changes the get_device_system_crosststamp() behavior for three corner
cases:
1. Bypass interpolation in the case cycles == tk->tkr_mono.cycle_last,
fixing the problem described above.
2. At the first timestamp_in_interval() call site, cycles == now no longer
causes failure.
3. At the second timestamp_in_interval() call site, history_begin->cycles
== system_counterval.cycles no longer causes failure.
adjust_historical_crosststamp() also works for this corner case,
where partial_history_cycles == total_history_cycles.
These behavioral changes should not cause any problems.
Fixes: 2c756feb18 ("time: Add history to cross timestamp interface supporting slower devices")
Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20231218073849.35294-3-peter.hilber@opensynergy.com
cycle_between() decides whether get_device_system_crosststamp() will
interpolate for older counter readings.
cycle_between() yields wrong results for a counter wrap-around where after
< before < test, and for the case after < test < before.
Fix the comparison logic.
Fixes: 2c756feb18 ("time: Add history to cross timestamp interface supporting slower devices")
Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/r/20231218073849.35294-2-peter.hilber@opensynergy.com
This general note about time_* functions is also useful to be available in
kernel documentation. Therefore transform it into a kernel-doc DOC block
with proper formatting.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240123164702.55612-6-anna-maria@linutronix.de
timer_base struct lacks description of struct members. Important struct
member information is sprinkled in comments or in code all over the place.
Collect information and write struct description to keep track of most
important information in a single place.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240123164702.55612-5-anna-maria@linutronix.de
The return value of tick_nohz_next_event() is not obvious at the first
glance. Add a kernel-doc compatible function description which also covers
return values.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240123164702.55612-4-anna-maria@linutronix.de
Documentation of functions lacks the annotations which are used by
kernel-doc and *.rst to make appearance in rendered documents more
user-friendly.
Use those annotations to improve user-friendliness. While at it prevent
duplication of comments and use a reference instead.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240123164702.55612-3-anna-maria@linutronix.de
hrtimer base related struct definitions are part of hrtimers.h as it is
required there. With this, also the struct documentation which is for core
code internal use, is exposed into the general api.
To prevent this, move all core internal definitions and the related
includes into hrtimer_defs.h.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240123164702.55612-2-anna-maria@linutronix.de
- Reformat nested if-conditionals in Makefiles with 4 spaces
- Fix CONFIG_DEBUG_INFO_BTF builds for big endian
- Fix modpost for module srcversion
- Fix an escape sequence warning in gen_compile_commands.py
- Fix kallsyms to ignore ARMv4 thunk symbols
-----BEGIN PGP SIGNATURE-----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=hE/P
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Reformat nested if-conditionals in Makefiles with 4 spaces
- Fix CONFIG_DEBUG_INFO_BTF builds for big endian
- Fix modpost for module srcversion
- Fix an escape sequence warning in gen_compile_commands.py
- Fix kallsyms to ignore ARMv4 thunk symbols
* tag 'kbuild-fixes-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kallsyms: ignore ARMv4 thunks along with others
modpost: trim leading spaces when processing source files list
gen_compile_commands: fix invalid escape sequence warning
kbuild: Fix changing ELF file type for output of gen_btf for big endian
docs: kconfig: Fix grammar and formatting
kbuild: use 4-space indentation when followed by conditionals
requested so that mapping of reserved regions is prevented which would
otherwise lead to system crashes on UV machines
-----BEGIN PGP SIGNATURE-----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=B6od
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.8_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
- Use a GB page for identity mapping only when memory of this size is
requested so that mapping of reserved regions is prevented which
would otherwise lead to system crashes on UV machines
* tag 'x86_urgent_for_v6.8_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm/ident_map: Use gbpages only where full GB page should be mapped.
Three fixes are included here. Two are strictly hardware-related
for the i801 and qcom-geni devices. Meanwhile, a fix from Arnd
addresses a compilation error encountered during compile test on
powerpc.
-----BEGIN PGP SIGNATURE-----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=yLmA
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Two fixes for i801 and qcom-geni devices. Meanwhile, a fix from Arnd
addresses a compilation error encountered during compile test on
powerpc"
* tag 'i2c-for-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: i801: Fix block process call transactions
i2c: pasemi: split driver into two separate modules
i2c: qcom-geni: Correct I2C TRE sequence
- Fix ftrace bug on boot caused by exit text sections with -fpatchable-function-entry.
- Fix accuracy of stolen time on pseries since the switch to VIRT_CPU_ACCOUNTING_GEN.
- Fix a crash in the IOMMU code when doing DLPAR remove.
- Set pt_regs->link on scv entry to fix BPF stack unwinding.
- Add missing PPC_FEATURE_BOOKE on 64-bit e5500/e6500, which broke gdb.
- Fix boot on some 6xx platforms with STRICT_KERNEL_RWX enabled.
- Fix build failures with KASAN enabled and 32KB stack size.
- Some other minor fixes.
Thanks to: Arnd Bergmann, Benjamin Gray, Christophe Leroy, David Engraf, Gaurav
Batra, Jason Gunthorpe, Jiangfeng Xiao, Matthias Schiffer, Nathan Lynch, Naveen
N Rao, Nicholas Piggin, Nysal Jan K.A, R Nageswara Sastry, Shivaprasad G Bhat,
Shrikanth Hegde, Spoorthy, Srikar Dronamraju, Venkat Rao Bagalkote.
-----BEGIN PGP SIGNATURE-----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=TiJM
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"This is a bit of a big batch for rc4, but just due to holiday hangover
and because I didn't send any fixes last week due to a late revert
request. I think next week should be back to normal.
- Fix ftrace bug on boot caused by exit text sections with
'-fpatchable-function-entry'
- Fix accuracy of stolen time on pseries since the switch to
VIRT_CPU_ACCOUNTING_GEN
- Fix a crash in the IOMMU code when doing DLPAR remove
- Set pt_regs->link on scv entry to fix BPF stack unwinding
- Add missing PPC_FEATURE_BOOKE on 64-bit e5500/e6500, which broke
gdb
- Fix boot on some 6xx platforms with STRICT_KERNEL_RWX enabled
- Fix build failures with KASAN enabled and 32KB stack size
- Some other minor fixes
Thanks to Arnd Bergmann, Benjamin Gray, Christophe Leroy, David
Engraf, Gaurav Batra, Jason Gunthorpe, Jiangfeng Xiao, Matthias
Schiffer, Nathan Lynch, Naveen N Rao, Nicholas Piggin, Nysal Jan K.A,
R Nageswara Sastry, Shivaprasad G Bhat, Shrikanth Hegde, Spoorthy,
Srikar Dronamraju, and Venkat Rao Bagalkote"
* tag 'powerpc-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/iommu: Fix the missing iommu_group_put() during platform domain attach
powerpc/pseries: fix accuracy of stolen time
powerpc/ftrace: Ignore ftrace locations in exit text sections
powerpc/cputable: Add missing PPC_FEATURE_BOOKE on PPC64 Book-E
powerpc/kasan: Limit KASAN thread size increase to 32KB
Revert "powerpc/pseries/iommu: Fix iommu initialisation during DLPAR add"
powerpc: 85xx: mark local functions static
powerpc: udbg_memcons: mark functions static
powerpc/kasan: Fix addr error caused by page alignment
powerpc/6xx: set High BAT Enable flag on G2_LE cores
selftests/powerpc/papr_vpd: Check devfd before get_system_loc_code()
powerpc/64: Set task pt_regs->link to the LR value on scv entry
powerpc/pseries/iommu: Fix iommu initialisation during DLPAR add
powerpc/pseries/papr-sysparm: use u8 arrays for payloads
Here are some driver core fixes, a kobject fix, and a documentation
update for 6.8-rc5. In detail these changes are:
- devlink fixes for reported issues with 6.8-rc1
- topology scheduling regression fix that has been reported by many
- kobject loosening of checks change in -rc1 is now reverted as some
codepaths seemed to need the checks
- documentation update for the CVE process. Has been reviewed by
many, the last minute change to the document was to bring the .rst
format back into the the new style rules, the contents did not
change.
All of these, except for the documentation update, have been in
linux-next for over a week. The documentation update has been reviewed
for weeks by a group of developers, and in public for a week and the
wording has stabilized for now. If future changes are needed, we can do
so before 6.8-final is out (or anytime after that.)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZdC7Eg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykMaQCgnFRIta+T0yxCftMfSxqEcMeDLcsAoIM7v7WK
krcgNVRuERcuJfHIoS6u
=jshL
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some driver core fixes, a kobject fix, and a documentation
update for 6.8-rc5. In detail these changes are:
- devlink fixes for reported issues with 6.8-rc1
- topology scheduling regression fix that has been reported by many
- kobject loosening of checks change in -rc1 is now reverted as some
codepaths seemed to need the checks
- documentation update for the CVE process. Has been reviewed by
many, the last minute change to the document was to bring the .rst
format back into the the new style rules, the contents did not
change.
All of these, except for the documentation update, have been in
linux-next for over a week. The documentation update has been reviewed
for weeks by a group of developers, and in public for a week and the
wording has stabilized for now. If future changes are needed, we can
do so before 6.8-final is out (or anytime after that)"
* tag 'driver-core-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Documentation: Document the Linux Kernel CVE process
Revert "kobject: Remove redundant checks for whether ktype is NULL"
driver core: fw_devlink: Improve logs for cycle detection
driver core: fw_devlink: Improve detection of overlapping cycles
driver core: Fix device_link_flag_is_sync_state_only()
topology: Set capacity_freq_ref in all cases
Here is a small set of char/misc and IIO driver fixes for 6.8-rc5
Included in here are:
- lots of iio driver fixes for reported issues
- nvmem device naming fixup for reported problem
- interconnect driver fixes for reported issues
All of these have been in linux-next for a while with no reported the
issues (the nvmem patch was included in a different branch in linux-next
before sent to me for inclusion here.)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZdC4jQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykGSACdEb+xhXVI0SeTGb9mSDwcYk3MWz8AoKo/ivvf
LCLRlZfd5ajqfahZzVt/
=Zy4F
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / miscdriver fixes from Greg KH:
"Here is a small set of char/misc and IIO driver fixes for 6.8-rc5.
Included in here are:
- lots of iio driver fixes for reported issues
- nvmem device naming fixup for reported problem
- interconnect driver fixes for reported issues
All of these have been in linux-next for a while with no reported the
issues (the nvmem patch was included in a different branch in
linux-next before sent to me for inclusion here)"
* tag 'char-misc-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
nvmem: include bit index in cell sysfs file name
iio: adc: ad4130: only set GPIO_CTRL if pin is unused
iio: adc: ad4130: zero-initialize clock init data
interconnect: qcom: x1e80100: Add missing ACV enable_mask
interconnect: qcom: sm8650: Use correct ACV enable_mask
iio: accel: bma400: Fix a compilation problem
iio: commom: st_sensors: ensure proper DMA alignment
iio: hid-sensor-als: Return 0 for HID_USAGE_SENSOR_TIME_TIMESTAMP
iio: move LIGHT_UVA and LIGHT_UVB to the end of iio_modifier
staging: iio: ad5933: fix type mismatch regression
iio: humidity: hdc3020: fix temperature offset
iio: adc: ad7091r8: Fix error code in ad7091r8_gpio_setup()
iio: adc: ad_sigma_delta: ensure proper DMA alignment
iio: imu: adis: ensure proper DMA alignment
iio: humidity: hdc3020: Add Makefile, Kconfig and MAINTAINERS entry
iio: imu: bno055: serdev requires REGMAP
iio: magnetometer: rm3100: add boundary check for the value read from RM3100_REG_TMRC
iio: pressure: bmp280: Add missing bmp085 to SPI id table
iio: core: fix memleak in iio_device_register_sysfs
interconnect: qcom: sm8550: Enable sync_state
...
Here are 3 small tty and serial driver fixes for 6.8-rc5:
- revert a 8250_pci1xxxx off-by-one change that was incorrect
- 2 changes to fix the transmit path of the mxs-auart driver, fixing a
regression in the 6.2 release
All of these have been in linux-next for over a week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZdDJUg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym4BACfe9/pmdSg9FUqXz1U3lTImFeYMEsAniVius/E
OB3drtgoWp6bkxP0QdNJ
=EnCw
-----END PGP SIGNATURE-----
Merge tag 'tty-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial fixes from Greg KH:
"Here are three small tty and serial driver fixes for 6.8-rc5:
- revert a 8250_pci1xxxx off-by-one change that was incorrect
- two changes to fix the transmit path of the mxs-auart driver,
fixing a regression in the 6.2 release
All of these have been in linux-next for over a week with no reported
issues"
* tag 'tty-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: mxs-auart: fix tx
serial: core: introduce uart_port_tx_flags()
serial: 8250_pci1xxxx: partially revert off by one patch
Here are 2 small fixes for 6.8-rc5:
- thunderbolt to fix a reported issue on many platforms
- dwc3 driver revert of a commit that caused problems in -rc1
Both of these changes have been in linux-next for over a week with no
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZdDMCw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykq4QCgv+jbHMdGOPV4zC0m1AbqZaLlv9cAoK4unDNN
oaigTXXSCJqMgVoLzCfC
=GNLF
-----END PGP SIGNATURE-----
Merge tag 'usb-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are two small fixes for 6.8-rc5:
- thunderbolt to fix a reported issue on many platforms
- dwc3 driver revert of a commit that caused problems in -rc1
Both of these changes have been in linux-next for over a week with no
reported issues"
* tag 'usb-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
Revert "usb: dwc3: Support EBC feature of DWC_usb31"
thunderbolt: Fix setting the CNS bit in ROUTER_CS_5
-----BEGIN PGP SIGNATURE-----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=qDwL
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.8-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Keep bridges in D0 if we need to poll downstream devices for PME to
resolve a v6.6 regression where we failed to enumerate devices below
bridges put in D3hot by runtime PM, e.g., NVMe drives connected via
Thunderbolt or USB4 docks (Alex Williamson)
- Add Siddharth Vadapalli as PCI TI DRA7XX/J721E reviewer
* tag 'pci-v6.8-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
MAINTAINERS: Add Siddharth Vadapalli as PCI TI DRA7XX/J721E reviewer
PCI: Fix active state requirement in PME polling
- tracing/probes: Fix BTF structure member finder to find the members
which are placed after any anonymous union member correctly.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmXQqH8bHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bKCsH/3EWGLBbwNMFFje+t2Bp
L6LgeyG7ZUzeDb4ioO2bae++e3m7xtR7YAWbZoX193/BfPbBpr9rkUCfYqAaImBk
dzdI+E8/gOkliLP0Vvj5GIecKDUdlB053NRgoOcq0n1NYOO3/4kyPZ+53tX5gsBI
YNcdIKDdEVWX0+vinK6cCjWOLdVJc/8pH/6G2KNgG6Qs2T1dV0YzW5QRv1hhUOr3
1Obog64AFt7tVtIkGOK19gRJKa6VpysdD8wpekJnKfquTtFffrsgf4yTg84zf7Fe
ueaOtJ7pV4R0SbQ/n5SnXe5cxXjX7MD24FZaeHCB7mp8sOsdeTukFmSTsIgOFeD/
cBQ=
=KY+B
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fix from Masami Hiramatsu:
- tracing/probes: Fix BTF structure member finder to find the members
which are placed after any anonymous union member correctly.
* tag 'probes-fixes-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/probes: Fix to search structure fields correctly
-----BEGIN PGP SIGNATURE-----
iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmXP2xEACgkQiiy9cAdy
T1EGMwwAiclDnZEtlHRK80Kmncnk7JaLnmHqLLfgIocVo0MDnaUrJVftj43F2OP/
za1uJfI9uM+lgM+vbEjldLxMf8yVnt6MpgzwXBZftppFpVPAwiwvGh4m4RAKreUj
SnE/WEINjj3p3dTJdnKup3Ff2hDXm9VBLpGPWwUTQ0RNWROO7hUtnTyeGRCZKEgy
uCVVU8AS5DAvBpuWZ+K0zG/omts42fP399GkQUD5Pz8DgOaFCMfQU33/zPFQEkPX
idnXH3KL4SHTFvytTTRCgHGg2x5MLersC6zYqwlgTD9YkGpr1UbuIRYvVO793Bek
VqhQTsnSnQSTuJ5lCH7elcLhF8XPF/qM+sRw/OoidgUwMMDjN0jMkwxBk+MX8Gw2
6lJfWAjTjRhanF6s501fEGd4YPFIBAysmW1XLiS12ot05s5k9D7sp+EjklPsSxvX
VrHHtcElY9rwh5sk7gZsmBl2U2x8k4ZvZeq6dIqQAvg+oQAbi9mTFrGuxsC3jD/x
LP2cFzhW
=v3wq
-----END PGP SIGNATURE-----
Merge tag '6.8-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
"Five smb3 client fixes, most also for stable:
- Two multichannel fixes (one to fix potential handle leak on retry)
- Work around possible serious data corruption (due to change in
folios in 6.3, for cases when non standard maximum write size
negotiated)
- Symlink creation fix
- Multiuser automount fix"
* tag '6.8-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: Fix regression in writes when non-standard maximum write size negotiated
smb: client: handle path separator of created SMB symlinks
smb: client: set correct id, uid and cruid for multiuser automounts
cifs: update the same create_guid on replay
cifs: fix underflow in parse_server_interfaces()
The Linux kernel project now has the ability to assign CVEs to fixed
issues, so document the process and how individual developers can get a
CVE if one is not automatically assigned for their fixes.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/2024021731-essence-sadness-28fd@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix to search a field from the structure which has anonymous union
correctly.
Since the reference `type` pointer was updated in the loop, the search
loop suddenly aborted where it hits an anonymous union. Thus it can not
find the field after the anonymous union. This avoids updating the
cursor `type` pointer in the loop.
Link: https://lore.kernel.org/all/170791694361.389532.10047514554799419688.stgit@devnote2/
Fixes: 302db0f5b3 ("tracing/probes: Add a function to search a member of a struct/union")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Three fixes are included here. Two are strictly hardware-related
for the i801 and qcom-geni devices. Meanwhile, a fix from Arnd
addresses a compilation error encountered during compile test on
powerpc.
