Andrew Lunn says:
====================
mv88e6xxx fixed link fixes
Recent changes for how the MAC is configured broke fixed links, as
used by CPU/DSA ports, and for SFPs when phylink cannot be used. The
first fix is unchanged from v1. The second fix takes a different
solution than v1. If a CPU or DSA port is known to have a PHYLINK
instance, configure the port down before instantiating the PHYLINK, so
it is in the down state as expected by PHYLINK.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
DSA and CPU ports can be configured in two ways. By default, the
driver should configure such ports to there maximum bandwidth. For
most use cases, this is sufficient. When this default is insufficient,
a phylink instance can be bound to such ports, and phylink will
configure the port, e.g. based on fixed-link properties. phylink
assumes the port is initially down. Given that the driver should have
already configured it to its maximum speed, ask the driver to down
the port before instantiating the phylink instance.
Fixes: 30c4a5b0aa ("net: mv88e6xxx: use resolved link config in mac_link_up()")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 88e6185 is reporting it has detected a PHY, when a port is
connected to an SFP. As a result, the fixed-phy configuration is not
being applied. That then breaks packet transfer, since the port is
reported as being down.
Add additional conditions to check the interface mode, and if it is
fixed always configure the port on link up/down, independent of the
PPU status.
Fixes: 30c4a5b0aa ("net: mv88e6xxx: use resolved link config in mac_link_up()")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson says:
====================
ionic: address automated build complaints
Kernel build checks found a couple of things to improve.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove an unused initialized value.
Fixes: 7e4d47596b ("ionic: replay filters after fw upgrade")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the appropriate header for using dynamic_hex_dump(), which
seems to be incidentally included in some configurations but
not all.
Fixes: 7e4d47596b ("ionic: replay filters after fw upgrade")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the DATA packet transmission to disable nofrag for UDPv4 on an AF_INET6
socket as well as UDPv6 when trying to transmit fragmentably.
Without this, packets filled to the normal size used by the kernel AFS
client of 1412 bytes be rejected by udp_sendmsg() with EMSGSIZE
immediately. The ->sk_error_report() notification hook is called, but
rxrpc doesn't generate a trace for it.
This is a temporary fix; a more permanent solution needs to involve
changing the size of the packets being filled in accordance with the MTU,
which isn't currently done in AF_RXRPC. The reason for not doing so was
that, barring the last packet in an rx jumbo packet, jumbos can only be
assembled out of 1412-byte packets - and the plan was to construct jumbos
on the fly at transmission time.
Also, there's no point turning on IPV6_MTU_DISCOVER, since IPv6 has to
engage in this anyway since fragmentation is only done by the sender. We
can then condense the switch-statement in rxrpc_send_data_packet().
Fixes: 75b54cb57c ("rxrpc: Add IPv6 support")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
KSZ9131 will not work with some switches due to workaround for KSZ9031
introduced in commit d2fd719bcb
("net/phy: micrel: Add workaround for bad autoneg").
Use genphy_read_status instead of dedicated ksz9031_read_status.
Fixes: bff5b4b373 ("net: phy: micrel: add Microchip KSZ9131 initial driver")
Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge an operating performance points (OPP) framework update for
5.7-rc2 from Viresh Kumar:
"This contains a single patch that lets the OPP core to be used by
several IO drivers without making a lot of changes in them for the
case where the same driver may be used by a platform with an OPP
table or a clock node on another one. I am looking to get this into
5.7 release itself, which will enable other users (in multiple
frameworks) to get merged without waiting for the dependency to get
resolved."
* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
opp: Manage empty OPP tables with clk handle
phy-rockchip-inno-usb2.txt was converted to yaml.
Fix the corresponding reference.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Changeset 32ced09d79 ("dt-bindings: serial: Convert slave-device bindings to json-schema")
moved a binding to json and updated the links.
Yet, one link was not changed, due to a merge conflict.
Update this one too.
Fixes: 32ced09d79 ("dt-bindings: serial: Convert slave-device bindings to json-schema")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
This file was removed, and another file was added instead of
it, on two separate commits.
Splitting a single logical change (doc conversion) on two
patches is a bad thing, as it makes harder to discover what
crap happened.
Anyway, this patch fixes the broken reference, making it
pointing to the new location of the file.
Fixes: 922003733d ("dt-bindings: phy: Remove Cadence MHDP PHY dt binding")
Fixes: c6d8eef38b7f ("dt-bindings: phy: Add Cadence MHDP PHY bindings in YAML format.")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
'loongson,parent_int_map' is an array, but the schema is defining a
matrix resulting in the follow warnings:
Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.example.dt.yaml:
interrupt-controller@3ff01400: loongson,parent_int_map:0: [4043309055] is too short
Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.example.dt.yaml:
interrupt-controller@3ff01400: loongson,parent_int_map:1: [251658240] is too short
Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.example.dt.yaml:
interrupt-controller@3ff01400: loongson,parent_int_map:2: [0] is too short
Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.example.dt.yaml:
interrupt-controller@3ff01400: loongson,parent_int_map:3: [0] is too short
The correct way to define an array is a list in 'items' and/or a size
defined by 'minItems' and 'maxItems'.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Fix the path warnings in the adi,axi-fan-control and adt7475 bindings:
Documentation/devicetree/bindings/hwmon/adt7475.yaml: $id:
relative path/filename doesn't match actual path or filename
expected: http://devicetree.org/schemas/hwmon/adt7475.yaml#
Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml: $id:
relative path/filename doesn't match actual path or filename
expected: http://devicetree.org/schemas/hwmon/adi,axi-fan-control.yaml#
Cc: Jean Delvare <jdelvare@suse.com>
Cc: linux-hwmon@vger.kernel.org
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Rob Herring <robh@kernel.org>
A recent update to dtc and changes to the default warnings introduced
some new warnings in the DT binding examples:
Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.example.dts:23.13-61:
Warning (dma_ranges_format): /example-0/dram-controller@1c01000:dma-ranges: "dma-ranges" property has invalid length (12 bytes) (parent #address-cells == 1, child #address-cells == 2, #size-cells == 1)
Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.example.dts:17.22-28.11:
Warning (unit_address_vs_reg): /example-0/fpga-axi@0: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.example.dts:34.13-54:
Warning (dma_ranges_format): /example-0/memory-controller@2c00000:dma-ranges: "dma-ranges" property has invalid length (24 bytes) (parent #address-cells == 1, child #address-cells == 2, #size-cells == 2)
Documentation/devicetree/bindings/mfd/st,stpmic1.example.dts:19.15-79.11:
Warning (unit_address_vs_reg): /example-0/i2c@0: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.example.dts:28.23-31.15:
Warning (unit_address_vs_reg): /example-0/mdio@37000000/switch@10: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/rng/brcm,bcm2835.example.dts:17.5-21.11:
Warning (unit_address_vs_reg): /example-0/rng: node has a reg or ranges property, but no unit name
Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.example.dts:20.20-43.11:
Warning (unit_address_vs_reg): /example-0/soc@0: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/usb/ingenic,musb.example.dts:18.28-21.11:
Warning (unit_address_vs_reg): /example-0/usb-phy@0: node has a unit name, but no reg or ranges property
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: "Nuno Sá" <nuno.sa@analog.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-hwmon@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Cc: linux-rpi-kernel@lists.infradead.org
Cc: linux-spi@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
The DT example needs #address-cells and #size-cells for I2C bus or
validity checker will generate warnings. Add these properties in
BD71837 and BD71847 binding examples.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Rob Herring <robh@kernel.org>
The following warnings are seen with 'make dt_binding_check':
Documentation/devicetree/bindings/clock/arm,syscon-icst.example.dts:17.16-24.11: Warning (unit_address_vs_reg): /example-0/clock@00: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/clock/arm,syscon-icst.example.dts:17.16-24.11: Warning (unit_address_format): /example-0/clock@00: unit name should not have leading 0s
Fix them by removing the unneeded clock unit name.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
The following warnings are seen with 'make dt_binding_check':
Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.example.dts:19.22-30.11: Warning (unit_address_vs_reg): /example-0/i2c@00000000: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.example.dts:19.22-30.11: Warning (unit_address_format): /example-0/i2c@00000000: unit name should not have leading 0s
Fix it by removing the unneeded i2c unit name.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
The following warning is seen with 'make dt_binding_check':
Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml: $id: relative path/filename doesn't match actual path or filename
Fix it by removing the "bindings" directory from the file path.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
The compatible string in the example misses the vendor information.
Pass the "adi" vendor to fix it.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
First set of fixes for v5.6. Fixes for a crash and for two compiler
warnings.
brcmfmac
* fix a crash related to monitor interface
ath11k
* fix compiler warnings without CONFIG_THERMAL
rtw88
* fix compiler warnings related to suspend and resume functions
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJeldbSAAoJEG4XJFUm622b9xsIAKt9InoIGg6LHD4DrHLzobFA
FWUZL4QLLNaIFVZCB1+TkxTfSezQA0ueb0LcwfG05wq1oyAfFAz6jTTRqzUM8d2r
HJUwNX9DNS2FWEZX5XBeknkdUN2ff2G9E9sKstOyGexhT4WRd+DiQJwXTDyjPDBK
dTZlFVP+RicQVDhuCzwapRvFECPV/otZc619cswGiyUqBQMV+/wyrtw0mhPCAvbs
CdnA+mz/TFR4fQdRK9+hMt8dPjZBYkKfFjkVgpQLEAU618dryXQBHxklr3J1xG3h
WJzy1azadAdSxXrEAhkoOaA4qj/wX5qP7aYDJbzUh6Lo+KL5/I3a2vXu9GECCng=
=pw26
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-2020-04-14' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for v5.7
First set of fixes for v5.6. Fixes for a crash and for two compiler
warnings.
brcmfmac
* fix a crash related to monitor interface
ath11k
* fix compiler warnings without CONFIG_THERMAL
rtw88
* fix compiler warnings related to suspend and resume functions
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This issue was detected by using the Coccinelle software:
kernel/bpf/verifier.c:1259:16-21: WARNING: conversion to bool not needed here
The conversion to bool is unneeded, remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/1586779076-101346-1-git-send-email-zou_wei@huawei.com
The commit mentioned in the Fixes tag reuses the local prog variable
when looking up an expected_fd. The variable is not reset when fd < 0
causing a detach with the expected_fd set to actually call
dev_xdp_install for the existing program. The end result is that the
detach does not happen.
Fixes: 92234c8f15 ("xdp: Support specifying expected existing program when attaching XDP")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200412133204.43847-1-dsahern@kernel.org
In commit 65c9362859 ("bpftool: Add struct_ops support") a new
type of command named struct_ops has been added. This command requires
a kernel with CONFIG_DEBUG_INFO_BTF=y set and for retrieving BTF info
in bpftool, the helper get_btf_vmlinux() is used.
When running this command on kernel without BTF debug info, this will
lead to 'btf_vmlinux' variable being an invalid(error) pointer. And by
this, btf_free() causes a segfault when executing 'bpftool struct_ops'.
This commit adds pointer validation with IS_ERR not to free invalid
pointer, and this will fix the segfault issue.
Fixes: 65c9362859 ("bpftool: Add struct_ops support")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200410020612.2930667-1-danieltimlee@gmail.com
Test that frozen and mmap()'ed BPF map can't be mprotect()'ed as writable or
executable memory. Also validate that "downgrading" from writable to read-only
doesn't screw up internal writable count accounting for the purposes of map
freezing.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200410202613.3679837-2-andriin@fb.com
VM_MAYWRITE flag during initial memory mapping determines if already mmap()'ed
pages can be later remapped as writable ones through mprotect() call. To
prevent user application to rewrite contents of memory-mapped as read-only and
subsequently frozen BPF map, remove VM_MAYWRITE flag completely on initially
read-only mapping.
Alternatively, we could treat any memory-mapping on unfrozen map as writable
and bump writecnt instead. But there is little legitimate reason to map
BPF map as read-only and then re-mmap() it as writable through mprotect(),
instead of just mmap()'ing it as read/write from the very beginning.
Also, at the suggestion of Jann Horn, drop unnecessary refcounting in mmap
operations. We can just rely on VMA holding reference to BPF map's file
properly.
Fixes: fc9702273e ("bpf: Add mmap() support for BPF_MAP_TYPE_ARRAY")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/bpf/20200410202613.3679837-1-andriin@fb.com
This patch fixes an incorrect check in how immediate memory offsets are
computed for BPF_DW on arm.
For BPF_LDX/ST/STX + BPF_DW, the 32-bit arm JIT breaks down an 8-byte
access into two separate 4-byte accesses using off+0 and off+4. If off
fits in imm12, the JIT emits a ldr/str instruction with the immediate
and avoids the use of a temporary register. While the current check off
<= 0xfff ensures that the first immediate off+0 doesn't overflow imm12,
it's not sufficient for the second immediate off+4, which may cause the
second access of BPF_DW to read/write the wrong address.
This patch fixes the problem by changing the check to
off <= 0xfff - 4 for BPF_DW, ensuring off+4 will never overflow.
A side effect of simplifying the check is that it now allows using
negative immediate offsets in ldr/str. This means that small negative
offsets can also avoid the use of a temporary register.
This patch introduces no new failures in test_verifier or test_bpf.c.
Fixes: c5eae69257 ("ARM: net: bpf: improve 64-bit store implementation")
Fixes: ec19e02b34 ("ARM: net: bpf: fix LDX instructions")
Co-developed-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200409221752.28448-1-luke.r.nels@gmail.com
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAl6ViNsTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXuXIB/4nuYRCt4d/XaeHF6dCWU45ThG+tNs7
p/OnBPZmknI0SnZ4uR/XW5caHEFj7g9ndYh+M1afZ/zKdsc+syMSDT5XhuhC/GKV
fQRW0qO8N+IAqXbLzJxyBg6fH2anwfe3w2uy2cKDEZk6d4FD5atTWhRY6R4ISq0l
g7pUyvQN1q+G6KH2snmOaZL8mybFkbHrmwtAZzcjzdzqasdLFiQB8EEFkONG66t9
HeNTyUF0mnbGBIePQLSZSHLj5p4yHG/9pa3jgqO5dsmIdsBvoaVNqEi3pCm1s/5n
BH9FWn6fTwpcKvtF385yzBiFFlzBVgXbetxuSmxxOkWW4P+db5B/GL2Y
=fjSF
-----END PGP SIGNATURE-----
Merge tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- a series from Tianyu Lan to fix crash reporting on Hyper-V
- three miscellaneous cleanup patches
* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/Hyper-V: Report crash data in die() when panic_on_oops is set
x86/Hyper-V: Report crash register data when sysctl_record_panic_msg is not set
x86/Hyper-V: Report crash register data or kmsg before running crash kernel
x86/Hyper-V: Trigger crash enlightenment only once during system crash.
x86/Hyper-V: Free hv_panic_page when fail to register kmsg dump
x86/Hyper-V: Unload vmbus channel in hv panic callback
x86: hyperv: report value of misc_features
hv_debugfs: Make hv_debug_root static
hv: hyperv_vmbus.h: Replace zero-length array with flexible-array member
-----BEGIN PGP SIGNATURE-----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=pkZ2
-----END PGP SIGNATURE-----
Merge tag 'for-5.7-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"We have a few regressions and one fix for stable:
- revert fsync optimization
- fix lost i_size update
- fix a space accounting leak
- build fix, add back definition of a deprecated ioctl flag
- fix search condition for old roots in relocation"
* tag 'for-5.7-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: re-instantiate the removed BTRFS_SUBVOL_CREATE_ASYNC definition
btrfs: fix reclaim counter leak of space_info objects
btrfs: make full fsyncs always operate on the entire file again
btrfs: fix lost i_size update after cloning inline extent
btrfs: check commit root generation in should_ignore_root
-----BEGIN PGP SIGNATURE-----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=o13s
-----END PGP SIGNATURE-----
Merge tag 'afs-fixes-20200413' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull AFS fixes from David Howells:
- Fix the decoding of fetched file status records so that the xdr
pointer is advanced under all circumstances.
- Fix the decoding of a fetched file status record that indicates an
inline abort (ie. an error) so that it sets the flag saying the
decoder stored the abort code.
- Fix the decoding of the result of the rename operation so that it
doesn't skip the decoding of the second fetched file status (ie. that
of the dest dir) in the case that the source and dest dirs were the
same as this causes the xdr pointer not to be advanced, leading to
incorrect decoding of subsequent parts of the reply.
- Fix the dump of a bad YFSFetchStatus record to dump the full length.
- Fix a race between local editing of directory contents and accessing
the dir for reading or d_revalidate by using the same lock in both.
- Fix afs_d_revalidate() to not accidentally reverse the version on a
dentry when it's meant to be bringing it forward.
* tag 'afs-fixes-20200413' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Fix afs_d_validate() to set the right directory version
afs: Fix race between post-modification dir edit and readdir/d_revalidate
afs: Fix length of dump of bad YFSFetchStatus record
afs: Fix rename operation status delivery
afs: Fix decoding of inline abort codes from version 1 status records
afs: Fix missing XDR advance in xdr_decode_{AFS,YFS}FSFetchStatus()
The system reboot failed as some IP blocks enter power gate before perform
hw resource destory. Meanwhile use unify interface to set device CGPG to ungate
state can simplify the amdgpu poweroff or reset ungate guard.
Fixes: 487eca11a3 ("drm/amdgpu: fix gfx hang during suspend with video playback (v2)")
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Tested-by: Mengbing Wang <Mengbing.Wang@amd.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Before the pci_driver->probe() is called, the pci subsystem calls
runtime_forbid() and runtime_get_sync() on this pci dev, so only call
runtime_put_autosuspend() is not enough to enable the runtime_pm on
this device.
For controllers with vgaswitcheroo feature, the pci/quirks.c will call
runtime_allow() for this dev, then the controllers could enter
rt_idle/suspend/resume, but for non-vgaswitcheroo controllers like
Intel hda controllers, the runtime_pm is not enabled because the
runtime_allow() is not called.
Since it is no harm calling runtime_allow() twice, here let hda
driver call runtime_allow() for all controllers. Then the runtime_pm
is enabled on all controllers after the put_autosuspend() is called.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20200414142725.6020-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To pick up the changes in these csets:
295bcca849 ("linux/bits.h: add compile time sanity check of GENMASK inputs")
3945ff37d2 ("linux/bits.h: Extract common header for vDSO")
To address this tools/perf build warning:
Warning: Kernel ABI header at 'tools/include/linux/bits.h' differs from latest version at 'include/linux/bits.h'
diff -u tools/include/linux/bits.h include/linux/bits.h
This clashes with usage of userspace's static_assert(), that, at least
on glibc, is guarded by a ifnded/endif pair, do the same to our copy of
build_bug.h and avoid that diff in check_headers.sh so that we continue
checking for drifts with the kernel sources master copy.
This will all be tested with the set of build containers that includes
uCLibc, musl libc, lots of glibc versions in lots of distros and cross
build environments.
The tools/objtool, tools/bpf, etc were tested as well.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Will be needed when syncing the linux/bits.h header, in the next cset.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
d3b1b776ee ("x86/entry/64: Remove ptregs qualifier from syscall table")
cab56d3484 ("x86/entry: Remove ABI prefixes from functions in syscall tables")
27dd84fafc ("x86/entry/64: Use syscall wrappers for x32_rt_sigreturn")
Addressing this tools/perf build warning:
Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
That didn't result in any tooling changes, as what is extracted are just
the first two columns, and these patches touched only the third.
$ cp /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c /tmp
$ cp arch/x86/entry/syscalls/syscall_64.tbl tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
$ make -C tools/perf O=/tmp/build/perf install-bin
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j12' parallel build
DESCEND plugins
CC /tmp/build/perf/util/syscalltbl.o
INSTALL trace_plugins
LD /tmp/build/perf/util/perf-in.o
LD /tmp/build/perf/perf-in.o
LINK /tmp/build/perf/perf
$ diff -u /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c /tmp/syscalls_64.c
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the change in:
88be76cdaf ("drm/i915: Allow userspace to specify ringsize on construction")
That don't result in any changes in tooling, just silences this perf
build warning:
Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Picking the changes from:
455e00f141 ("drm: Add getfb2 ioctl")
Silencing these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h'
diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h
Now 'perf trace' and other code that might use the
tools/perf/trace/beauty autogenerated tables will be able to translate
this new ioctl code into a string:
$ tools/perf/trace/beauty/drm_ioctl.sh > before
$ cp include/uapi/drm/drm.h tools/include/uapi/drm/drm.h
$ tools/perf/trace/beauty/drm_ioctl.sh > after
$ diff -u before after
--- before 2020-04-14 09:28:45.461821077 -0300
+++ after 2020-04-14 09:28:53.594782685 -0300
@@ -107,6 +107,7 @@
[0xCB] = "SYNCOBJ_QUERY",
[0xCC] = "SYNCOBJ_TRANSFER",
[0xCD] = "SYNCOBJ_TIMELINE_SIGNAL",
+ [0xCE] = "MODE_GETFB2",
[DRM_COMMAND_BASE + 0x00] = "I915_INIT",
[DRM_COMMAND_BASE + 0x01] = "I915_FLUSH",
[DRM_COMMAND_BASE + 0x02] = "I915_FLIP",
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes from:
9a5788c615 ("KVM: PPC: Book3S HV: Add a capability for enabling secure guests")
3c9bd4006b ("KVM: x86: enable dirty log gradually in small chunks")
13da9ae1cd ("KVM: s390: protvirt: introduce and enable KVM_CAP_S390_PROTECTED")
e0d2773d48 ("KVM: s390: protvirt: UV calls in support of diag308 0, 1")
19e1227768 ("KVM: S390: protvirt: Introduce instruction data area bounce buffer")
29b40f105e ("KVM: s390: protvirt: Add initial vm and cpu lifecycle handling")
So far we're ignoring those arch specific ioctls, we need to revisit
this at some time to have arch specific tables, etc:
$ grep S390 tools/perf/trace/beauty/kvm_ioctl.sh
egrep -v " ((ARM|PPC|S390)_|[GS]ET_(DEBUGREGS|PIT2|XSAVE|TSC_KHZ)|CREATE_SPAPR_TCE_64)" | \
$
This addresses these tools/perf build warnings:
Warning: Kernel ABI header at 'tools/arch/arm/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm/include/uapi/asm/kvm.h'
diff -u tools/arch/arm/include/uapi/asm/kvm.h arch/arm/include/uapi/asm/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jay Zhou <jianjay.zhou@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get the changes in:
4c8cf31885 ("vhost: introduce vDPA-based backend")
Silencing this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h'
diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h
This automatically picks these new ioctls, making tools such as 'perf
trace' aware of them and possibly allowing to use the strings in
filters, etc:
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before
$ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after
$ diff -u before after
--- before 2020-04-14 09:12:28.559748968 -0300
+++ after 2020-04-14 09:12:38.781696242 -0300
@@ -24,9 +24,16 @@
[0x44] = "SCSI_GET_EVENTS_MISSED",
[0x60] = "VSOCK_SET_GUEST_CID",
[0x61] = "VSOCK_SET_RUNNING",
+ [0x72] = "VDPA_SET_STATUS",
+ [0x74] = "VDPA_SET_CONFIG",
+ [0x75] = "VDPA_SET_VRING_ENABLE",
};
static const char *vhost_virtio_ioctl_read_cmds[] = {
[0x00] = "GET_FEATURES",
[0x12] = "GET_VRING_BASE",
[0x26] = "GET_BACKEND_FEATURES",
+ [0x70] = "VDPA_GET_DEVICE_ID",
+ [0x71] = "VDPA_GET_STATUS",
+ [0x73] = "VDPA_GET_CONFIG",
+ [0x76] = "VDPA_GET_VRING_NUM",
};
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tiwei Bie <tiwei.bie@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
xenbus_map_ring_valloc() maps a ring page and returns the status of the
used grant (0 meaning success).
There are Xen hypervisors which might return the value 1 for the status
of a failed grant mapping due to a bug. Some callers of
xenbus_map_ring_valloc() test for errors by testing the returned status
to be less than zero, resulting in no error detected and crashing later
due to a not available ring page.
Set the return value of xenbus_map_ring_valloc() to GNTST_general_error
in case the grant status reported by Xen is greater than zero.
This is part of XSA-316.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Wei Liu <wl@xen.org>
Link: https://lore.kernel.org/r/20200326080358.1018-1-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
The rtw88 driver defines emtpy functions with multiple indirections
but gets one of these wrong:
drivers/net/wireless/realtek/rtw88/pci.c:1347:12: error: 'rtw_pci_resume' defined but not used [-Werror=unused-function]
1347 | static int rtw_pci_resume(struct device *dev)
| ^~~~~~~~~~~~~~
drivers/net/wireless/realtek/rtw88/pci.c:1342:12: error: 'rtw_pci_suspend' defined but not used [-Werror=unused-function]
1342 | static int rtw_pci_suspend(struct device *dev)
Better simplify it to rely on the conditional reference in
SIMPLE_DEV_PM_OPS(), and mark the functions as __maybe_unused to avoid
warning about it.
I'm not sure if these are needed at all given that the functions
don't do anything, but they were only recently added.
Fixes: 44bc17f7f5 ("rtw88: support wowlan feature for 8822c")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200408185413.218643-1-arnd@arndb.de
To pick up the changes from:
077168e241 ("x86/mce/amd: Add PPIN support for AMD MCE")
753039ef8b ("x86/cpu/amd: Call init_amd_zn() om Family 19h processors too")
6650cdd9a8 ("x86/split_lock: Enable split lock detection by kernel")
These don't cause any changes in tooling, just silences this perf build
warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Wei Huang <wei.huang2@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get the changes in:
e346b38130 ("mm/mremap: add MREMAP_DONTUNMAP to mremap()")
Add that to 'perf trace's mremap 'flags' decoder.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/mman.h' differs from latest version at 'include/uapi/linux/mman.h'
diff -u tools/include/uapi/linux/mman.h include/uapi/linux/mman.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Brian Geffon <bgeffon@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get the changes in:
ef2c41cf38 ("clone3: allow spawning processes into cgroups")
Add that to 'perf trace's clone 'flags' decoder.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/sched.h' differs from latest version at 'include/uapi/linux/sched.h'
diff -u tools/include/uapi/linux/sched.h include/uapi/linux/sched.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get in line with:
8165b57bca ("linux/const.h: Extract common header for vDSO")
And silence this tools/perf/ build warning:
Warning: Kernel ABI header at 'tools/include/linux/const.h' differs from latest version at 'include/linux/const.h'
diff -u tools/include/linux/const.h include/linux/const.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
