Multi Circular Queue doesn't use outstanding_reqs. However, the UFS clock
scaling functions use outstanding_reqs to determine if there are requests
pending. When MCQ is enabled, this check always returns false.
Hence use active_reqs to check if there are pending requests.
Fixes: eacb139b77 ("scsi: ufs: core: mcq: Enable multi-circular queue")
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/a24e0d646aac70eae0fc5e05fac0c58bb7e6e680.1678317160.git.quic_asutoshd@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Smatch static checker reported:
drivers/ufs/host/ufs-qcom.c:1469
ufs_qcom_mcq_config_resource() info: returning a literal zero is
cleaner
Fix the above warning by returning in place instead of a jump to a label.
Also remove the usage of devm_kfree() as it's unnecessary in this function.
Fixes: c263b4ef73 ("scsi: ufs: core: mcq: Configure resource regions")
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Link: https://lore.kernel.org/r/3ebd2582af74b81ef7b57149f57c6a3bf0963953.1677721229.git.quic_asutoshd@quicinc.com
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix an error case in ufs_qcom_mcq_config_resource(), where the return value
is set to 0 before passing it to PTR_ERR.
This led to Smatch warning:
drivers/ufs/host/ufs-qcom.c:1455 ufs_qcom_mcq_config_resource() warn:
passing zero to 'PTR_ERR'
Fixes: c263b4ef73 ("scsi: ufs: core: mcq: Configure resource regions")
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Link: https://lore.kernel.org/r/94ca99b327af634799ce5f25d0112c28cd00970d.1677721072.git.quic_asutoshd@quicinc.com
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The "dev_req_params" pointer points to inside the middle of a struct so it
can't be NULL. Removing this impossible condition is nice because now we
don't need to consider the correct error code for that situation.
Link: https://lore.kernel.org/r/Y/yA3niWUcGYgBU8@kili
Fixes: f06fcc7155 ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The ufshcd driver uses simpleondemand governor for devfreq. Add it to the
list of ufshcd softdeps to allow userspace initramfs tools like dracut to
automatically pull the governor module into the initramfs together with UFS
drivers.
Link: https://lore.kernel.org/r/20230220140740.14379-1-athierry@redhat.com
Signed-off-by: Adrien Thierry <athierry@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Updates that missed the first pull, mostly because of needing more
soak time. Driver updates (zfcp, ufs, mpi3mr, plus two ipr bug
fixes), an enclosure services (ses) update (mostly bug fixes) and
other minor bug fixes and changes.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZAJf2SYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishWYeAP9u6umX
5Trq6mtfdPyhSxIhgD6AwJDgVkeApSKAHZRu0AD/dfMTQmeaJory4LD4JW+uAgVl
yFPVz9VPlKTiaM2lwUI=
=BKzr
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"Updates that missed the first pull, mostly because of needing more
soak time.
Driver updates (zfcp, ufs, mpi3mr, plus two ipr bug fixes), an
enclosure services (ses) update (mostly bug fixes) and other minor bug
fixes and changes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits)
scsi: zfcp: Trace when request remove fails after qdio send fails
scsi: zfcp: Change the type of all fsf request id fields and variables to u64
scsi: zfcp: Make the type for accessing request hashtable buckets size_t
scsi: ufs: core: Simplify ufshcd_execute_start_stop()
scsi: ufs: core: Rely on the block layer for setting RQF_PM
scsi: core: Extend struct scsi_exec_args
scsi: lpfc: Fix double word in comments
scsi: core: Remove the /proc/scsi/${proc_name} directory earlier
scsi: core: Fix a source code comment
scsi: cxgbi: Remove unneeded version.h include
scsi: qedi: Remove unneeded version.h include
scsi: mpi3mr: Remove unneeded version.h include
scsi: mpi3mr: Fix missing mrioc->evtack_cmds initialization
scsi: mpi3mr: Use number of bits to manage bitmap sizes
scsi: mpi3mr: Remove unnecessary memcpy() to alltgt_info->dmi
scsi: mpi3mr: Fix issues in mpi3mr_get_all_tgt_info()
scsi: mpi3mr: Fix an issue found by KASAN
scsi: mpi3mr: Replace 1-element array with flex-array
scsi: ipr: Work around fortify-string warning
scsi: ipr: Make ipr_probe_ioa_part2() return void
...
As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv
-----BEGIN PGP SIGNATURE-----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=p6Xp
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv"
* tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
power: supply: Introduce Qualcomm PMIC GLINK power supply
soc: apple: rtkit: Do not copy the reg state structure to the stack
soc: sunxi: SUN20I_PPU should depend on PM
memory: renesas-rpc-if: Remove redundant division of dummy
soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
MAINTAINERS: Update qcom CPR maintainer entry
dt-bindings: firmware: document Qualcomm SM8550 SCM
dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
soc: qcom: socinfo: Add support for new field in revision 17
soc: qcom: smd-rpm: Add IPQ9574 compatible
soc: qcom: pmic_glink: remove redundant calculation of svid
soc: qcom: stats: Populate all subsystem debugfs files
dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
soc: qcom: pmic_glink: Introduce altmode support
...
Updates to the usual drivers (ufs, lpfc, qla2xxx, libsas). The major
core change is a rework to remove the two helpers around
scsi_execute_cmd and use it as the only submission interface along
with other minor fixes and updates.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCY/Z7BSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishfF9AP9HzZaZ
0XumuxjchcJHRntcIAzb9kE62SSWFxBrgZQCtAEAyhAO1zK284esgCa+arkzEC7p
uhxpufQSGnYvbasStsU=
=VsH1
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, qla2xxx, libsas).
The major core change is a rework to remove the two helpers around
scsi_execute_cmd and use it as the only submission interface along
with other minor fixes and updates"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (142 commits)
scsi: ufs: core: Fix an error handling path in ufshcd_read_desc_param()
scsi: ufs: core: Fix device management cmd timeout flow
scsi: aic94xx: Add missing check for dma_map_single()
scsi: smartpqi: Replace one-element array with flexible-array member
scsi: mpt3sas: Fix a memory leak
scsi: qla2xxx: Remove the unused variable wwn
scsi: ufs: core: Fix kernel-doc syntax
scsi: ufs: core: Add hibernation callbacks
scsi: snic: Fix memory leak with using debugfs_lookup()
scsi: ufs: core: Limit DMA alignment check
scsi: Documentation: Correct spelling
scsi: Documentation: Correct spelling
scsi: target: Documentation: Correct spelling
scsi: aacraid: Allocate cmd_priv with scsicmd
scsi: ufs: qcom: dt-bindings: Add SM8550 compatible string
scsi: ufs: ufs-qcom: Clear qunipro_g4_sel for HW version major 5
scsi: ufs: qcom: fix platform_msi_domain_free_irqs() reference
scsi: ufs: core: Enable DMA clustering
scsi: ufs: exynos: Fix the maximum segment size
scsi: ufs: exynos: Fix DMA alignment for PAGE_SIZE != 4096
...
Use scsi_execute_cmd() instead of open-coding it.
Link: https://lore.kernel.org/r/20230210193258.4004923-4-bvanassche@acm.org
Cc: Mike Christie <michael.christie@oracle.com>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Asutosh Das <quic_asutoshd@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Do not set RQF_PM explicitly since scsi_alloc_request() sets it indirectly
if BLK_MQ_REQ_PM is set. The call chain for the code that sets RQF_PM is as
follows:
scsi_alloc_request()
blk_mq_alloc_request()
__blk_mq_alloc_requests()
blk_mq_rq_ctx_init()
if (data->flags & BLK_MQ_REQ_PM)
data->rq_flags |= RQF_PM;
Link: https://lore.kernel.org/r/20230210193258.4004923-3-bvanassche@acm.org
Cc: Mike Christie <michael.christie@oracle.com>
Cc: John Garry <john.g.garry@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ufshcd_config_mcq() may change the can_queue value. The current code
invokes scsi_add_host() before ufshcd_config_mcq() so the tags are
limited to the original can_queue value.
Fix this by invoking scsi_add_host() after ufshcd_config_mcq().
Link: https://lore.kernel.org/r/8840cea4a57b46dabce18acc39afc50ab826330f.1676567593.git.quic_asutoshd@quicinc.com
Fixes: 2468da61ea ("scsi: ufs: core: mcq: Configure operation and runtime interface")
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following compilation error when CONFIG_PM is set to 'n':
drivers/ufs/host/ufs-mediatek.c: In function `ufs_mtk_runtime_suspend`:
drivers/ufs/host/ufs-mediatek.c:1623:8: error: implicit declaration of
function `ufshcd_runtime_suspend`; did you mean `ufs_mtk_runtime_suspend`?
[-Werror=implicit-function-declaration]
1623 | ret = ufshcd_runtime_suspend(dev);
| ^~~~~~~~~~~~~~~~~~~~~~
| ufs_mtk_runtime_suspend
drivers/ufs/host/ufs-mediatek.c: In function `ufs_mtk_runtime_resume`:
drivers/ufs/host/ufs-mediatek.c:1638:9: error: implicit declaration of function
`ufshcd_runtime_resume`; did you mean `ufs_mtk_runtime_resume`?
[-Werror=implicit-function-declaration]
1638 | return ufshcd_runtime_resume(dev);
| ^~~~~~~~~~~~~~~~~~~~~
| ufs_mtk_runtime_resume
At top level:
drivers/ufs/host/ufs-mediatek.c:1632:12: error: `ufs_mtk_runtime_resume`
defined but not used [-Werror=unused-function]
1632 | static int ufs_mtk_runtime_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~
drivers/ufs/host/ufs-mediatek.c:1618:12: error: `ufs_mtk_runtime_suspend`
defined but not used [-Werror=unused-function]
1618 | static int ufs_mtk_runtime_suspend(struct device *dev)
Link: https://lore.kernel.org/r/20230220142431.54589-1-frank.li@vivo.com
Reported-by: k2ci <kernel-bot@kylinos.cn>
Reported-by: Shida Zhang <zhangshida@kylinos.cn>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During UFS initialization, devfreq initialization is asynchronous:
ufshcd_async_scan() calls ufshcd_add_lus(), which in turn initializes
devfreq for UFS. The simple ondemand governor is then loaded. If it is
built as a module, request_module() is called and throws a warning:
WARNING: CPU: 7 PID: 167 at kernel/kmod.c:136 __request_module+0x1e0/0x460
Modules linked in: crct10dif_ce llcc_qcom phy_qcom_qmp_usb ufs_qcom phy_qcom_snps_femto_v2 ufshcd_pltfrm phy_qcom_qmp_combo ufshcd_core phy_qcom_qmp_ufs qcom_wdt socinfo fuse ipv6
CPU: 7 PID: 167 Comm: kworker/u16:3 Not tainted 6.2.0-rc6-00009-g58706f7fb045 #1
Hardware name: Qualcomm SA8540P Ride (DT)
Workqueue: events_unbound async_run_entry_fn
pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __request_module+0x1e0/0x460
lr : __request_module+0x1d8/0x460
sp : ffff800009323b90
x29: ffff800009323b90 x28: 0000000000000000 x27: 0000000000000000
x26: ffff800009323d50 x25: ffff7b9045f57810 x24: ffff7b9045f57830
x23: ffffdc5a83e426e8 x22: ffffdc5ae80a9818 x21: 0000000000000001
x20: ffffdc5ae7502f98 x19: ffff7b9045f57800 x18: ffffffffffffffff
x17: 312f716572667665 x16: 642f7366752e3030 x15: 0000000000000000
x14: 000000000000021c x13: 0000000000005400 x12: ffff7b9042ed7614
x11: ffff7b9042ed7600 x10: 00000000636c0890 x9 : 0000000000000038
x8 : ffff7b9045f2c880 x7 : ffff7b9045f57c68 x6 : 0000000000000080
x5 : 0000000000000000 x4 : 8000000000000000 x3 : 0000000000000000
x2 : 0000000000000000 x1 : ffffdc5ae5d382f0 x0 : 0000000000000001
Call trace:
__request_module+0x1e0/0x460
try_then_request_governor+0x7c/0x100
devfreq_add_device+0x4b0/0x5fc
ufshcd_async_scan+0x1d4/0x310 [ufshcd_core]
async_run_entry_fn+0x34/0xe0
process_one_work+0x1d0/0x320
worker_thread+0x14c/0x444
kthread+0x10c/0x110
ret_from_fork+0x10/0x20
This occurs because synchronous module loading from async is not
allowed. According to __request_module():
/*
* We don't allow synchronous module loading from async. Module
* init may invoke async_synchronize_full() which will end up
* waiting for this task which already is waiting for the module
* loading to complete, leading to a deadlock.
*/
Such a deadlock was experienced on the Qualcomm QDrive3/sa8540p-ride. With
DEVFREQ_GOV_SIMPLE_ONDEMAND=m, the boot hangs after the warning.
Fix both the warning and the deadlock by moving devfreq initialization out
of the async routine.
Tested on the sa8540p-ride by using fio to put the UFS under load, and
printing the trace generated by
/sys/kernel/tracing/events/ufs/ufshcd_clk_scaling events. The trace looks
similar with and without the change.
Link: https://lore.kernel.org/r/20230217194423.42553-1-athierry@redhat.com
Signed-off-by: Adrien Thierry <athierry@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The TC G210 driver only supports devices declared in the device tree.
Hence make this driver dependent on CONFIG_OF. This patch fixes the
following compiler error:
drivers/ufs/host/tc-dwc-g210-pltfrm.c:36:34: error: ‘tc_dwc_g210_pltfm_match’ defined but not used [-Werror=unused-const-variable=]
36 | static const struct of_device_id tc_dwc_g210_pltfm_match[] = {
|
Link: https://lore.kernel.org/r/20230209184914.2762172-1-bvanassche@acm.org
Cc: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move include/linux/qcom_scm.h to include/linux/firmware/qcom/qcom_scm.h.
This removes 1 of a few remaining Qualcomm-specific headers into a more
approciate subdirectory under include/.
Suggested-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Guru Das Srinagesh <quic_gurus@quicinc.com>
Acked-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230203210956.3580811-1-quic_eberman@quicinc.com
If an error occurs, some memory may need to be freed, as in the other error
handling paths.
Before the commit in the Fixes tag, this test was done before the memory
allocation, so there was no issue.
Fixes: 16ed9d312b ("scsi: ufs: core: Remove ufshcd_map_desc_id_to_length()")
Link: https://lore.kernel.org/r/2c6e42205e5ec22e5e8c7c85c6deb8fde31c74da.1673781835.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In the UFS error handling flow, the host will send a device management cmd
(NOP OUT) to the device for link recovery. If this cmd times out and
clearing the doorbell fails, ufshcd_wait_for_dev_cmd() will do nothing and
return. hba->dev_cmd.complete struct is not set to NULL.
When this happens, if cmd has been completed by device, then we will call
complete() in __ufshcd_transfer_req_compl(). Because the complete struct is
allocated on the stack, the following crash will occur:
ipanic_die+0x24/0x38 [mrdump]
die+0x344/0x748
arm64_notify_die+0x44/0x104
do_debug_exception+0x104/0x1e0
el1_dbg+0x38/0x54
el1_sync_handler+0x40/0x88
el1_sync+0x8c/0x140
queued_spin_lock_slowpath+0x2e4/0x3c0
__ufshcd_transfer_req_compl+0x3b0/0x1164
ufshcd_trc_handler+0x15c/0x308
ufshcd_host_reset_and_restore+0x54/0x260
ufshcd_reset_and_restore+0x28c/0x57c
ufshcd_err_handler+0xeb8/0x1b6c
process_one_work+0x288/0x964
worker_thread+0x4bc/0xc7c
kthread+0x15c/0x264
ret_from_fork+0x10/0x30
Link: https://lore.kernel.org/r/20221216032532.1280-1-mason.zhang@mediatek.com
Signed-off-by: Mason Zhang <Mason.Zhang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following kernel-doc warnings:
drivers/ufs/core/ufs-mcq.c:87: warning: Function parameter or member 'hba' not described in 'ufshcd_mcq_config_mac'
drivers/ufs/core/ufs-mcq.c:87: warning: Function parameter or member 'max_active_cmds' not described in 'ufshcd_mcq_config_mac'
drivers/ufs/core/ufs-mcq.c:107: warning: Function parameter or member 'hba' not described in 'ufshcd_mcq_req_to_hwq'
drivers/ufs/core/ufs-mcq.c:107: warning: Function parameter or member 'req' not described in 'ufshcd_mcq_req_to_hwq'
drivers/ufs/core/ufs-mcq.c:128: warning: Function parameter or member 'hba' not described in 'ufshcd_mcq_decide_queue_depth'
Link: https://lore.kernel.org/r/20230202220155.561115-1-bvanassche@acm.org
Fixes: 854f84e7fe ("scsi: ufs: core: mcq: Find hardware queue to queue request")
Fixes: 2468da61ea ("scsi: ufs: core: mcq: Configure operation and runtime interface")
Fixes: 7224c80687 ("scsi: ufs: core: mcq: Calculate queue depth")
Cc: Asutosh Das <quic_asutoshd@quicinc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Asutosh Das <quic_asutoshd@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add freeze, thaw, and restore callbacks for hibernate and restore
functionality.
Link: https://lore.kernel.org/r/20230202161045.3956-2-quic_ahari@quicinc.com
Signed-off-by: Anjana Hari <quic_ahari@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The three DMA memory regions allocated for the host memory space are
documented to require alignment of 128, 1024, and 1024 respectively, but
the returned address is checked for PAGE_SIZE alignment.
In the case where these allocations are serviced by e.g. the Arm SMMU, the
size and alignment will be determined by its supported page sizes. In most
cases SZ_4K and a few larger sizes are available.
In the typical configuration this does not cause problems, but in the event
that the system PAGE_SIZE is increased beyond 4k, it's no longer reasonable
to expect that the allocation will be PAGE_SIZE aligned.
Limit the DMA alignment check to the actual alignment requirements written
in the comments in the code, to avoid the UFS core refusing to initialize
with such configuration.
Link: https://lore.kernel.org/r/20230201034917.1902330-1-quic_bjorande@quicinc.com
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Asutosh Das <quic_asutoshd@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On SM8550, depending on the Qunipro, we can run with G5 or G4. For now,
when the major version is 5 or above, we go with G5. Therefore, we need to
specifically tell UFS HC that.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The newly added MSI support is mostly hidden inside of an #ifdef,
except for one line that now causes a build failure when MSI
is disabled:
drivers/ufs/host/ufs-qcom.c: In function 'ufs_qcom_remove':
drivers/ufs/host/ufs-qcom.c:1698:9: error: implicit declaration of function 'platform_msi_domain_free_irqs' [-Werror=i]
1698 | platform_msi_domain_free_irqs(hba->dev);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Above that, the symbol that guards the other call was recently removed, so
that is all dead code at the moment.
Remove the incorrect #ifdef and instead of a Kconfig dependency to only
allow building the driver when CONFIG_GENERIC_MSI_IRQ is enabled. This
symbol is always present when PCI_MSI or ARM_GIC_V3_ITS are enabled, both
of which should be present on kernels that can run on Qualcomm SoCs.
The 'select RESET_CONTROLLER' in combination with this dependency
unfortunately causes a dependency loop and this is a user-visible symbol,
so it's better to change both to 'depends on'.
Link: https://lore.kernel.org/r/20230126211831.2274211-1-arnd@kernel.org
Fixes: 519b6274a7 ("scsi: ufs: qcom: Add MCQ ESI config vendor specific ops")
Fixes: 13e7accb81 ("genirq: Get rid of GENERIC_MSI_IRQ_DOMAIN")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
All UFS host controllers support DMA clustering. Hence enable DMA
clustering.
Notes:
- The max_segment_size parameter implements the 256 KiB limit for the
PRDT. The dma_boundary parameter represents a boundary that must not be
crossed by DMA scatter/gather lists. I'm not aware of any restrictions
on DMA scatter/gather lists in the UFSHCI specification other than the
256 KiB limit for the PRDT and the 32-bit address restriction for
controllers that only support 32-bits DMA. The latter restriction is
already handled by ufshcd_set_dma_mask().
- Without patch "scsi: ufs: exynos: Fix the maximum segment size", this
patch breaks support for the Exynos controller.
The history of the dma_boundary parameter in the UFS driver is as
follows:
* The initial UFS driver did not set the dma_boundary parameter.
* Commit 4dd4130a72 ("scsi: make sure all drivers set the use_clustering
flag") set the .use_clustering flag.
* Commit 4af14d113b ("scsi: remove the use_clustering flag") removed the
use_clustering flag and set the dma_boundary parameter instead.
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prepare for enabling DMA clustering and also for supporting PAGE_SIZE !=
4096 by declaring explicitly that the maximum segment size is 4096 bytes
for Exynos UFS host controllers. Add this code in
exynos_ufs_hce_enable_notify() such that it happens after scsi_host_alloc()
and before __scsi_init_queue() is called by the LUN scanning code.
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The Exynos UFS controller only supports scatter/gather list elements that
are aligned on a 4 KiB boundary. Fix DMA alignment in case PAGE_SIZE !=
4096. Rename UFSHCD_QUIRK_ALIGN_SG_WITH_PAGE_SIZE into
UFSHCD_QUIRK_4KB_DMA_ALIGNMENT.
Cc: Kiwoong Kim <kwmad.kim@samsung.com>
Fixes: 2b2bfc8aa5 ("scsi: ufs: Introduce a quirk to allow only page-aligned sg entries")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is a lock inversion and rwsem read-lock recursion in the devfreq
target callback which can lead to deadlocks.
Specifically, ufshcd_devfreq_scale() already holds a clk_scaling_lock
read lock when toggling the write booster, which involves taking the
dev_cmd mutex before taking another clk_scaling_lock read lock.
This can lead to a deadlock if another thread:
1) tries to acquire the dev_cmd and clk_scaling locks in the correct
order, or
2) takes a clk_scaling write lock before the attempt to take the
clk_scaling read lock a second time.
Fix this by dropping the clk_scaling_lock before toggling the write booster
as was done before commit 0e9d4ca43b ("scsi: ufs: Protect some contexts
from unexpected clock scaling").
While the devfreq callbacks are already serialised, add a second
serialising mutex to handle the unlikely case where a callback triggered
through the devfreq sysfs interface is racing with a request to disable
clock scaling through the UFS controller 'clkscale_enable' sysfs
attribute. This could otherwise lead to the write booster being left
disabled after having disabled clock scaling.
Also take the new mutex in ufshcd_clk_scaling_allow() to make sure that any
pending write booster update has completed on return.
Note that this currently only affects Qualcomm platforms since commit
87bd05016a ("scsi: ufs: core: Allow host driver to disable wb toggling
during clock scaling").
The lock inversion (i.e. 1 above) was reported by lockdep as:
======================================================
WARNING: possible circular locking dependency detected
6.1.0-next-20221216 #211 Not tainted
------------------------------------------------------
kworker/u16:2/71 is trying to acquire lock:
ffff076280ba98a0 (&hba->dev_cmd.lock){+.+.}-{3:3}, at: ufshcd_query_flag+0x50/0x1c0
but task is already holding lock:
ffff076280ba9cf0 (&hba->clk_scaling_lock){++++}-{3:3}, at: ufshcd_devfreq_scale+0x2b8/0x380
which lock already depends on the new lock.
[ +0.011606]
the existing dependency chain (in reverse order) is:
-> #1 (&hba->clk_scaling_lock){++++}-{3:3}:
lock_acquire+0x68/0x90
down_read+0x58/0x80
ufshcd_exec_dev_cmd+0x70/0x2c0
ufshcd_verify_dev_init+0x68/0x170
ufshcd_probe_hba+0x398/0x1180
ufshcd_async_scan+0x30/0x320
async_run_entry_fn+0x34/0x150
process_one_work+0x288/0x6c0
worker_thread+0x74/0x450
kthread+0x118/0x120
ret_from_fork+0x10/0x20
-> #0 (&hba->dev_cmd.lock){+.+.}-{3:3}:
__lock_acquire+0x12a0/0x2240
lock_acquire.part.0+0xcc/0x220
lock_acquire+0x68/0x90
__mutex_lock+0x98/0x430
mutex_lock_nested+0x2c/0x40
ufshcd_query_flag+0x50/0x1c0
ufshcd_query_flag_retry+0x64/0x100
ufshcd_wb_toggle+0x5c/0x120
ufshcd_devfreq_scale+0x2c4/0x380
ufshcd_devfreq_target+0xf4/0x230
devfreq_set_target+0x84/0x2f0
devfreq_update_target+0xc4/0xf0
devfreq_monitor+0x38/0x1f0
process_one_work+0x288/0x6c0
worker_thread+0x74/0x450
kthread+0x118/0x120
ret_from_fork+0x10/0x20
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&hba->clk_scaling_lock);
lock(&hba->dev_cmd.lock);
lock(&hba->clk_scaling_lock);
lock(&hba->dev_cmd.lock);
*** DEADLOCK ***
Fixes: 0e9d4ca43b ("scsi: ufs: Protect some contexts from unexpected clock scaling")
Cc: stable@vger.kernel.org # 5.12
Cc: Can Guo <quic_cang@quicinc.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230116161201.16923-1-johan+linaro@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add MCQ ESI config vendor specific ops.
Co-developed-by: Asutosh Das <quic_asutoshd@quicinc.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add and export two functions to enable ESI and config ESI base addresses.
The calls to these exported functions will be added by the next patch in
this series.
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
As Event Specific Interrupt message format is not defined in UFSHCI JEDEC
specs, and the ESI handling highly depends on how the format is designed,
hence add a vendor specific ops such that SoC vendors can configure their
own ESI handlers. If ESI vops is not provided or returning error, go with
the legacy (central) interrupt way.
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Enable MCQ in the Host Controller.
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Complete CQE requests in poll. Assumption is that several poll completion
may happen in different CPUs for the same completion queue. Hence a spin
lock protection is added.
Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support for completing requests from Completion Queue. Some host
controllers support vendor specific registers that provide a bitmap of all
CQs which have at least one completed CQE. Add this support. The MCQ
specification doesn't provide the Task Tag or its equivalent in the
Completion Queue Entry. So use an indirect method to find the Task Tag
from the Completion Queue Entry.
Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Modify completion path APIs and add completion queue entry.
Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support to find the hardware queue on which the request would be
queued. Since the very first queue is to serve device commands, an offset
of 1 is added to the index of the hardware queue.
Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support to send commands using multiple submission queues in MCQ mode.
Modify the functions that use ufshcd_send_command().
Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Enable shared tags for MCQ. For UFS, this should not have a huge
performance impact. It however simplifies the MCQ implementation and reuses
most of the existing code in the issue and completion path. Also add
multiple queue mapping to map_queue().
Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Runtime and operation registers are defined per Submission and Completion
queue. The location of these registers is not defined in the spec; meaning
the offsets and stride may vary for different HC vendors. Establish the
stride, base address, and doorbell address offsets from vendor host driver
and program it.
Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
To read the bqueuedepth, the device descriptor is fetched in Single
Doorbell Mode. This allocated memory may not be enough for MCQ mode because
the number of tags supported in MCQ mode may be larger than in SDB mode.
Hence, release the memory allocated in SDB mode and allocate memory for MCQ
mode operation. Define the UFS hardware queue and Completion Queue Entry.
Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The UFS device defines the supported queuedepth by bqueuedepth which has a
max value of 256. The HC defines MAC (Max Active Commands) that defines
the max number of commands that in flight to the UFS device. Calculate and
configure the nutrs based on both these values.
Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Define the MCQ resources and add support to ioremap the resource regions.
Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Multi-circular queue (MCQ) has been added in UFSHC v4.0 standard in
addition to the Single Doorbell mode. The MCQ mode supports multiple
submission and completion queues. Add support to allocate and configure
the queues. Add module parameters support to configure the queues.
Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If MCQ support is present, enabling it after MCQ support has been
configured would require reallocating tags and memory. It would also free
up the already allocated memory in Single Doorbell Mode. So defer invoking
scsi_add_host() until MCQ is configured.
Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support to check for MCQ capability in the UFSHC. Add a module
parameter to disable MCQ if needed.
Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Task Tag is limited to 8 bits and this restricts the number of active I/Os
to 255. In multi-circular queue mode, this may not be enough. The
specification provides EXT_IID which can be used to increase the number of
I/Os if the UFS device and UFSHC support it. This patch adds support to
probe for EXT_IID support in UFS device and UFSHC.
Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Compilation complains that two possible variables are used without
initialization:
drivers/ufs/core/ufs_bsg.c:112:6: warning: variable 'sg_cnt' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
drivers/ufs/core/ufs_bsg.c:112:6: warning: variable 'sg_list' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
Fix both warnings by adding initialization with sg_cnt = 0, sg_list = NULL.
Fixes: 6ff265fc5e ("scsi: ufs: core: bsg: Add advanced RPMB support in ufs_bsg")
Signed-off-by: Bean Huo <beanhuo@micron.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Xiaosen He <quic_xiaosenh@quicinc.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> says:
This series adds HS-G4 support to the Qcom UFS driver and PHY driver.
The newer Qcom platforms support configuring the UFS controller and
PHY in dual gears (i.e., controller/PHY can be configured to run in
two gear speeds). This is accomplished by adding two different PHY
init sequences to the PHY driver and the UFS driver requesting the one
that's required based on the platform configuration.
Initially the ufs-qcom driver will use the default gear G2 for
enumerating the UFS device. Afer enumeration, the max gear supported
by both the controller and device would be found out and that will be
used thereafter. But for using the max gear after enumeration, the
ufs-qcom driver requires the UFS device to be reinitialized. For this
purpose, a separate quirk has been introduced in the UFS core along
with a callback and those will be used by the ufs-qcom driver.
This series has been tested on following platforms:
* Qcom RB5 development platform powered by SM8250 SoC
* SM8450 based dev board
* Qdrive3/sa8540p-ride board based on SC8280XP (derivative)
Link: https://lore.kernel.org/r/20221222141001.54849-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Starting from Qcom UFS version 4.0, vendor specific REG_UFS_PARAM0 register
can be used to determine the maximum gear supported by the controller.
Suggested-by: Can Guo <quic_cang@quicinc.com>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Starting from Qualcomm UFS version 4, the UFS device needs to be
reinitialized after switching to maximum gear by the UFS core. Hence, add
support for it by enabling the UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH
quirk, implementing reinit_notify() callback and using the agreed gear
speed for setting the PHY mode.
Suggested-by: Can Guo <quic_cang@quicinc.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In the preparation of adding support for new gears, move the logic that
finds the gear for each platform to a new function. This helps with code
readability and also allows the logic to be used in other places of the
driver in future.
While at it, make it clear that this driver only supports symmetric gear
setting (hs_tx_gear == hs_rx_gear).
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
