1) kmap_atomic() is not needed here, kmap_local_page() is enough.
2) No need to make sum = csum_block_add(sum, next, off); conditional
upon next != 0 - adding 0 is a no-op as far as csum_block_add()
is concerned.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
kmap_local_page() is enough there. Moreover, we can use _copy_to_iter()
for actual copying in those cases - no useful extra checks on the
address we are copying from in that call.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
recalculating offset on each iteration is pointless - on all subsequent
passes through the loop it will be zero anyway.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Iterator macros used to provide the arguments for step callbacks in
a structure matching the flavour - iovec for ITER_IOVEC, kvec for
ITER_KVEC and bio_vec for ITER_BVEC. That already broke down for
ITER_XARRAY (bio_vec there); now that we are using kvec callback
for bvec and xarray cases, we are always passing a pointer + length
(void __user * + size_t for ITER_IOVEC callback, void * + size_t
for everything else).
Note that the original reason for bio_vec (page + offset + len) in
case of ITER_BVEC used to be that we did *not* want to kmap a
page when all we wanted was e.g. to find the alignment of its
subrange. Now all such users are gone and the ones that are left
want the page mapped anyway for actually copying the data.
So in all cases we have pointer + length, and there's no good
reason for keeping those in struct iovec or struct kvec - we
can just pass them to callback separately.
Again, less boilerplate in callbacks...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Making iterator macros keep track of the amount of data copied is pretty
easy and it has several benefits:
1) we no longer need the mess like (from += v.iov_len) - v.iov_len
in the callbacks - initial value + total amount copied so far would do
just fine.
2) less obviously, we no longer need to remember the initial amount
of data we wanted to copy; the loops in iterator macros are along the lines
of
wanted = bytes;
while (bytes) {
copy some
bytes -= copied
if short copy
break
}
bytes = wanted - bytes;
Replacement is
offs = 0;
while (bytes) {
copy some
offs += copied
bytes -= copied
if short copy
break
}
bytes = offs;
That wouldn't be a win per se, but unlike the initial value of bytes, the amount
copied so far *is* useful in callbacks.
3) in some cases (csum_and_copy_..._iter()) we already had offs manually
maintained by the callbacks. With that change we can drop that.
Less boilerplate and more readable code...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
After the previous commit we have
* xarray and bvec callbacks idential in all cases
* both equivalent to kvec callback wrapped into
kmap_local_page()/kunmap_local() pair.
So we can pass only two (iovec and kvec) callbacks to
iterate_and_advance() and let iterate_{bvec,xarray} wrap
it into kmap_local_page()/kunmap_local_page().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... and now we finally can sort out the mess in _copy_mc_to_iter().
Provide a variant of iterate_and_advance() that does *NOT* ignore
the return values of bvec, xarray and kvec callbacks, use that in
_copy_mc_to_iter(). That gets rid of magic in those callbacks -
we used to need it so we'd get at least the right return value in
case of failure halfway through.
As a bonus, now iterator is advanced by the amount actually copied
for all flavours. That's what the callers expect and it used to do that
correctly in iovec and xarray cases. However, in kvec and bvec cases
the iterator had not been advanced on such failures, breaking the users.
Fixed now...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... incidentally, using pointer instead of index in an array
(the only change here) trims half-kilobyte of .text...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The differences between iterate_iovec and iterate_kvec are minor:
* kvec callback is treated as if it returned 0
* initialization of __p is with i->iov and i->kvec resp.
which is trivially dealt with.
No code generation changes - compiler is quite capable of turning
left = ((void)(STEP), 0);
__v.iov_len -= left;
(with no accesses to left downstream) and
(void)(STEP);
into the same code.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Premature optimization is the root of all evil... Trying
to unroll the first pass through the loop makes it harder
to follow and not just for readers - compiler ends up
generating worse code than it would on a "non-optimized"
loop.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
iov_iter_advance() needs to do some non-trivial work when it's given
0 as argument (skip all empty iovecs, mostly). We used to implement
it via iterate_and_advance(); we no longer do so and for all other
users of iterate_and_advance() zero length is a no-op.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Namely, have off counted starting from 0 rather than from csstate->off.
To compensate we need to shift the initial value (csstate->sum) (rotate
by 8 bits, as usual for csum) and do the same after we are finished adding
the pieces up.
What we get out of that is a bit more redundancy in our variables - from
is always equal to addr + off, which will be useful several commits down
the road.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Replacement is called copy_page_from_iter_atomic(); unlike the old primitive the
callers do *not* need to do iov_iter_advance() after it. In case when they end
up consuming less than they'd been given they need to do iov_iter_revert() on
everything they had not consumed. That, however, needs to be done only on slow
paths.
All in-tree callers converted. And that kills the last user of iterate_all_kinds()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
note that in bvec case pages can be compound ones - we can't just assume
that each segment is covered by one (sub)page
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Here iterate_all_kinds() is used just to find the first (non-empty, in
case of iovec) segment. Which can be easily done explicitly.
Note that in bvec case we now can get more than PAGE_SIZE worth of them,
in case when we have a compound page in bvec and a range that crosses
a subpage boundary. Older behaviour had been to stop on that boundary;
we used to get the right first page (for_each_bvec() took care of that),
but that was all we'd got.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
For one thing, it's only used for iovec (and makes sense only for those).
For another, here we don't care about iov_offset, since the beginning of
the first segment and the end of the last one are ignored. So it makes
a lot more sense to just walk through the iovec array...
We need to deal with the case of truncated iov_iter, but unlike the
situation with iov_iter_alignment() we don't care where the last
segment ends - just which segment is the last one.
[fixed a braino spotted by Qian Cai <quic_qiancai@quicinc.com>]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It's easier to go over the array manually. We need to watch out
for truncated iov_iter, though - iovec array might cover more
than i->count.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
1) constify iov_iter argument; we are not advancing it in this primitive.
2) cap the amount requested by the amount of data in iov_iter. All
existing callers should've been safe, but the check is really cheap and
doing it here makes for easier analysis, as well as more consistent
semantics among the primitives.
3) don't bother with iterate_iovec(). Explicit loop is not any harder
to follow, and we get rid of standalone iterate_iovec() users - it's
only used by iterate_and_advance() and (soon to be gone) iterate_all_kinds().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We can do better than generic iterate_and_advance() for this one;
inspired by bvec_iter_advance() (and massaged into that form by
equivalent transformations).
[fixed a braino caught by kernel test robot <oliver.sang@intel.com>]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Instead of having them mixed in iter->type, use separate ->iter_type
and ->data_source (u8 and bool resp.) And don't bother with (pseudo-)
bitmap for the former - microoptimizations from being able to check
if the flavour is one of two values are not worth the confusion for
optimizer. It can't prove that we never get e.g. ITER_IOVEC | ITER_PIPE,
so we end up with extra headache.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
iovec is the most common one; test it first and test explicitly,
rather than "not anything else". Replace all flavour checks with
use of iov_iter_is_...() helpers.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Use corresponding plain variants, revert on short copy. That's the way it
should've been done from the very beginning, except that we didn't have
iov_iter_revert() back then...
[fixed another braino caught by Qian Cai <quic_qiancai@quicinc.com>]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
asking to advance by more than we have left in the iov_iter should
move to the very end; it should *not* leave negative i->count and
it should not spew into syslog, etc. - it's a legitimate operation.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... and actually should just check it's given an iovec-backed iterator
in the first place.
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In situation when copy_page_to_iter() got a compound page the current
code would only work on systems with no CONFIG_HIGHMEM. It *is* the majority
of real-world setups, or we would've drown in bug reports by now. Still needs
fixing.
Current variant works for solitary page; rename that to
__copy_page_to_iter() and turn the handling of compound pages into a loop over
subpages.
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Remove iov_iter_for_each_range() as it's no longer used with the removal of
lustre.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Patch series "btrfs: Convert kmap/memset/kunmap to memzero_user()".
Lifting memzero_user(), convert it to kmap_local_page() and then use it
in btrfs.
This patch (of 3):
memzero_page() can replace the kmap/memset/kunmap pattern in other
places in the code. While zero_user() has the same interface it is not
the same call and its use should be limited and some of those calls may
be better converted from zero_user() to memzero_page().[1] But that is
not addressed in this series.
Lift memzero_page() to highmem.
[1] https://lore.kernel.org/lkml/CAHk-=wijdojzo56FzYqE5TOYw2Vws7ik3LEMGj9SPQaJJ+Z73Q@mail.gmail.com/
Link: https://lkml.kernel.org/r/20210309212137.2610186-1-ira.weiny@intel.com
Link: https://lkml.kernel.org/r/20210309212137.2610186-2-ira.weiny@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: David Sterba <dsterba@suse.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix four things[1] in the patch that adds ITER_XARRAY[2]:
(1) Remove the address_space struct predeclaration. This is a holdover
from when it was ITER_MAPPING.
(2) Fix _copy_mc_to_iter() so that the xarray segment updates count and
iov_offset in the iterator before returning.
(3) Fix iov_iter_alignment() to not loop in the xarray case. Because the
middle pages are all whole pages, only the end pages need be
considered - and this can be reduced to just looking at the start
position in the xarray and the iteration size.
(4) Fix iov_iter_advance() to limit the size of the advance to no more
than the remaining iteration size.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Jeff Layton <jlayton@redhat.com>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Link: https://lore.kernel.org/r/YIVrJT8GwLI0Wlgx@zeniv-ca.linux.org.uk [1]
Link: https://lore.kernel.org/r/161918448151.3145707.11541538916600921083.stgit@warthog.procyon.org.uk [2]
Pull kmap conversion updates from David Sterba:
"This contains changes regarding kmap API use and eg conversion from
kmap_atomic to kmap_local_page.
The API belongs to memory management but to save cross-tree
dependency headaches we've agreed to take it through the btrfs tree
because there are some trivial conversions possible, while the rest
will need some time and getting the easy cases out of the way would be
convenient.
The changes can be grouped:
- function exports, new helpers
- new VM_BUG_ON for additional verification; it's been discussed if
it should be VM_BUG_ON or BUG_ON, the former was chosen due to
performance reasons
- code replaced by relevant helpers"
[ This is an updated version of a request that originally came in during
the merge window, but I asked for some updates:
https://lore.kernel.org/lkml/cover.1614090658.git.dsterba@suse.com/
which is why this got merge after the merge window closed. - Linus ]
* 'kmap-conversion-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: use copy_highpage() instead of 2 kmaps()
btrfs: use memcpy_[to|from]_page() and kmap_local_page()
mm/highmem: Add VM_BUG_ON() to mem*_page() calls
mm/highmem: Introduce memcpy_page(), memmove_page(), and memset_page()
mm/highmem: Convert memcpy_[to|from]_page() to kmap_local_page()
mm/highmem: Lift memcpy_[to|from]_page to core
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmAtmIwQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgplzLEAC5O+3rBM8QuiJdo39Yppmuw4hDJ6hOKynP
EJQLKQQi0VfXgU+MprGvcbpFYmNbgICvUICQkEzJuk++kPCu/BJtJz0yErQeLgS+
RdXiPV6enbF7iRML5TVRTr1q/z7sJMXcIIJ8Pz/rU/JNfGYExVd0WfnEY9mp1jOt
Bl9V+qyTazdP+Ma4+uEPatSayqcdi1rxB5I+7v/sLiOvKZZWkaRZjUZ/mxAjUfvK
dBOOPjMygEo3tCLkIyyA6lpLvr1r+SUZhLuebRLEKa3To3TW6RtoG0qwpKmI2iKw
ylLeVLB60nM9RUxjflVOfBsHxz1bDg5Ve86y5nCjQd4Jo8x1c4DnecyGE5/Tu8Rg
rgbsfD6nFWzhDCvcZT0XrfQ4ZAjIL2IfT+ypQiQ6UlRd3hvIKRmzWMkjuH2svr0u
ey9Kq+lYerI4cM0F3W73gzUKdIQOuCzBCYxQuSQQomscBa7FCInyU192dAI9Aj6l
Yd06mgKu6qCx6zLv6JfpBqaBHZMwyGE4dmZgPQFuuwO+b4N+Ck3Jm5fzEzw/xIxQ
wdo/DlsAl60BXentB6FByGBJaCjVdSymRqN/xNCAbFKCjmr6TLBuXPfg1gYYO7xC
VOcVjWe8iN3wWHZab3t2mxMKH9B9B/KKzIhu6TNHSmgtQ5paZPRCBx995pDyRw26
WC22RGC2MA==
=os1E
-----END PGP SIGNATURE-----
Merge tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-block
Pull core block updates from Jens Axboe:
"Another nice round of removing more code than what is added, mostly
due to Christoph's relentless pursuit of tech debt removal/cleanups.
This pull request contains:
- Two series of BFQ improvements (Paolo, Jan, Jia)
- Block iov_iter improvements (Pavel)
- bsg error path fix (Pan)
- blk-mq scheduler improvements (Jan)
- -EBUSY discard fix (Jan)
- bvec allocation improvements (Ming, Christoph)
- bio allocation and init improvements (Christoph)
- Store bdev pointer in bio instead of gendisk + partno (Christoph)
- Block trace point cleanups (Christoph)
- hard read-only vs read-only split (Christoph)
- Block based swap cleanups (Christoph)
- Zoned write granularity support (Damien)
- Various fixes/tweaks (Chunguang, Guoqing, Lei, Lukas, Huhai)"
* tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-block: (104 commits)
mm: simplify swapdev_block
sd_zbc: clear zone resources for non-zoned case
block: introduce blk_queue_clear_zone_settings()
zonefs: use zone write granularity as block size
block: introduce zone_write_granularity limit
block: use blk_queue_set_zoned in add_partition()
nullb: use blk_queue_set_zoned() to setup zoned devices
nvme: cleanup zone information initialization
block: document zone_append_max_bytes attribute
block: use bi_max_vecs to find the bvec pool
md/raid10: remove dead code in reshape_request
block: mark the bio as cloned in bio_iov_bvec_set
block: set BIO_NO_PAGE_REF in bio_iov_bvec_set
block: remove a layer of indentation in bio_iov_iter_get_pages
block: turn the nr_iovecs argument to bio_alloc* into an unsigned short
block: remove the 1 and 4 vec bvec_slabs entries
block: streamline bvec_alloc
block: factor out a bvec_alloc_gfp helper
block: move struct biovec_slab to bio.c
block: reuse BIO_INLINE_VECS for integrity bvecs
...
Working through a conversion to a call kmap_local_page() instead of
kmap() revealed many places where the pattern kmap/memcpy/kunmap
occurred.
Eric Biggers, Matthew Wilcox, Christoph Hellwig, Dan Williams, and Al
Viro all suggested putting this code into helper functions. Al Viro
further pointed out that these functions already existed in the iov_iter
code.[1]
Various locations for the lifted functions were considered.
Headers like mm.h or string.h seem ok but don't really portray the
functionality well. pagemap.h made some sense but is for page cache
functionality.[2]
Another alternative would be to create a new header for the promoted
memcpy functions, but it masks the fact that these are designed to copy
to/from pages using the kernel direct mappings and complicates matters
with a new header.
Placing these functions in 'highmem.h' is suboptimal especially with the
changes being proposed in the functionality of kmap. From a caller
perspective including/using 'highmem.h' implies that the functions
defined in that header are only required when highmem is in use which is
increasingly not the case with modern processors. However, highmem.h is
where all the current functions like this reside (zero_user(),
clear_highpage(), clear_user_highpage(), copy_user_highpage(), and
copy_highpage()). So it makes the most sense even though it is
distasteful for some.[3]
Lift memcpy_to_page() and memcpy_from_page() to pagemap.h.
[1] https://lore.kernel.org/lkml/20201013200149.GI3576660@ZenIV.linux.org.uk/https://lore.kernel.org/lkml/20201013112544.GA5249@infradead.org/
[2] https://lore.kernel.org/lkml/20201208122316.GH7338@casper.infradead.org/
[3] https://lore.kernel.org/lkml/20201013200149.GI3576660@ZenIV.linux.org.uk/#thttps://lore.kernel.org/lkml/20201208163814.GN1563847@iweiny-DESK2.sc.intel.com/
Cc: Boris Pismenny <borisp@mellanox.com>
Cc: Or Gerlitz <gerlitz.or@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When iteratively computing a checksum with csum_block_add, track the
offset "pos" to correctly rotate in csum_block_add when offset is odd.
The open coded implementation of skb_copy_and_csum_datagram did this.
With the switch to __skb_datagram_iter calling csum_and_copy_to_iter,
pos was reinitialized to 0 on each call.
Bring back the pos by passing it along with the csum to the callback.
Changes v1->v2
- pass csum value, instead of csump pointer (Alexander Duyck)
Link: https://lore.kernel.org/netdev/20210128152353.GB27281@optiplex/
Fixes: 950fcaecd5 ("datagram: consolidate datagram copy to iter helpers")
Reported-by: Oliver Graute <oliver.graute@gmail.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210203192952.1849843-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
iov_iter_advance() is heavily used, but implemented through generic
means. For bvecs there is a specifically crafted function for that, so
use bvec_iter_advance() instead, it's faster and slimmer.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
zero-length bvec segments are allowed in general, but not handled by bio
and down the block layer so filtered out. This inconsistency may be
confusing and prevent from optimisations. As zero-length segments are
useless and places that were generating them are patched, declare them
not allowed.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
sizeof needs to be called on the compat pointer, not the native one.
Fixes: 89cd35c58b ("iov_iter: transparently handle compat iovecs in import_iovec")
Reported-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
To test fault-tolerance of user memory access functions, introduce fault
injection to usercopy functions.
If a failure is expected return either -EFAULT or the total amount of
bytes that were not copied.
Signed-off-by: Albert van der Linde <alinde@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Marco Elver <elver@google.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20200831171733.955393-3-alinde@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull compat iovec cleanups from Al Viro:
"Christoph's series around import_iovec() and compat variant thereof"
* 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
security/keys: remove compat_keyctl_instantiate_key_iov
mm: remove compat_process_vm_{readv,writev}
fs: remove compat_sys_vmsplice
fs: remove the compat readv/writev syscalls
fs: remove various compat readv/writev helpers
iov_iter: transparently handle compat iovecs in import_iovec
iov_iter: refactor rw_copy_check_uvector and import_iovec
iov_iter: move rw_copy_check_uvector() into lib/iov_iter.c
compat.h: fix a spelling error in <linux/compat.h>
Pull copy_and_csum cleanups from Al Viro:
"Saner calling conventions for csum_and_copy_..._user() and friends"
[ Removing 800+ lines of code and cleaning stuff up is good - Linus ]
* 'work.csum_and_copy' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ppc: propagate the calling conventions change down to csum_partial_copy_generic()
amd64: switch csum_partial_copy_generic() to new calling conventions
sparc64: propagate the calling convention changes down to __csum_partial_copy_...()
xtensa: propagate the calling conventions change down into csum_partial_copy_generic()
mips: propagate the calling convention change down into __csum_partial_copy_..._user()
mips: __csum_partial_copy_kernel() has no users left
mips: csum_and_copy_{to,from}_user() are never called under KERNEL_DS
sparc32: propagate the calling conventions change down to __csum_partial_copy_sparc_generic()
i386: propagate the calling conventions change down to csum_partial_copy_generic()
sh: propage the calling conventions change down to csum_partial_copy_generic()
m68k: get rid of zeroing destination on error in csum_and_copy_from_user()
arm: propagate the calling convention changes down to csum_partial_copy_from_user()
alpha: propagate the calling convention changes down to csum_partial_copy.c helpers
saner calling conventions for csum_and_copy_..._user()
csum_and_copy_..._user(): pass 0xffffffff instead of 0 as initial sum
csum_partial_copy_nocheck(): drop the last argument
unify generic instances of csum_partial_copy_nocheck()
icmp_push_reply(): reorder adding the checksum up
skb_copy_and_csum_bits(): don't bother with the last argument
In reaction to a proposal to introduce a memcpy_mcsafe_fast()
implementation Linus points out that memcpy_mcsafe() is poorly named
relative to communicating the scope of the interface. Specifically what
addresses are valid to pass as source, destination, and what faults /
exceptions are handled.
Of particular concern is that even though x86 might be able to handle
the semantics of copy_mc_to_user() with its common copy_user_generic()
implementation other archs likely need / want an explicit path for this
case:
On Fri, May 1, 2020 at 11:28 AM Linus Torvalds <torvalds@linux-foundation.org> wrote:
>
> On Thu, Apr 30, 2020 at 6:21 PM Dan Williams <dan.j.williams@intel.com> wrote:
> >
> > However now I see that copy_user_generic() works for the wrong reason.
> > It works because the exception on the source address due to poison
> > looks no different than a write fault on the user address to the
> > caller, it's still just a short copy. So it makes copy_to_user() work
> > for the wrong reason relative to the name.
>
> Right.
>
> And it won't work that way on other architectures. On x86, we have a
> generic function that can take faults on either side, and we use it
> for both cases (and for the "in_user" case too), but that's an
> artifact of the architecture oddity.
>
> In fact, it's probably wrong even on x86 - because it can hide bugs -
> but writing those things is painful enough that everybody prefers
> having just one function.
Replace a single top-level memcpy_mcsafe() with either
copy_mc_to_user(), or copy_mc_to_kernel().
Introduce an x86 copy_mc_fragile() name as the rename for the
low-level x86 implementation formerly named memcpy_mcsafe(). It is used
as the slow / careful backend that is supplanted by a fast
copy_mc_generic() in a follow-on patch.
One side-effect of this reorganization is that separating copy_mc_64.S
to its own file means that perf no longer needs to track dependencies
for its memcpy_64.S benchmarks.
[ bp: Massage a bit. ]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: <stable@vger.kernel.org>
Link: http://lore.kernel.org/r/CAHk-=wjSqtXAqfUJxFtWNwmguFASTgB0dz1dT3V-78Quiezqbg@mail.gmail.com
Link: https://lkml.kernel.org/r/160195561680.2163339.11574962055305783722.stgit@dwillia2-desk3.amr.corp.intel.com
Use in compat_syscall to import either native or the compat iovecs, and
remove the now superflous compat_import_iovec.
This removes the need for special compat logic in most callers, and
the remaining ones can still be simplified by using __import_iovec
with a bool compat parameter.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Split rw_copy_check_uvector into two new helpers with more sensible
calling conventions:
- iovec_from_user copies a iovec from userspace either into the provided
stack buffer if it fits, or allocates a new buffer for it. Returns
the actually used iovec. It also verifies that iov_len does fit a
signed type, and handles compat iovecs if the compat flag is set.
- __import_iovec consolidates the native and compat versions of
import_iovec. It calls iovec_from_user, then validates each iovec
actually points to user addresses, and ensures the total length
doesn't overflow.
This has two major implications:
- the access_process_vm case loses the total lenght checking, which
wasn't required anyway, given that each call receives two iovecs
for the local and remote side of the operation, and it verifies
the total length on the local side already.
- instead of a single loop there now are two loops over the iovecs.
Given that the iovecs are cache hot this doesn't make a major
difference
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This lets the compiler inline it into import_iovec() generating
much better code.
Signed-off-by: David Laight <david.laight@aculab.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
All callers of these primitives will
* discard anything we might've copied in case of error
* ignore the csum value in case of error
* always pass 0xffffffff as the initial sum, so the
resulting csum value (in case of success, that is) will never be 0.
That suggest the following calling conventions:
* don't pass err_ptr - just return 0 on error.
* don't bother with zeroing destination, etc. in case of error
* don't pass the initial sum - just use 0xffffffff.
This commit does the minimal conversion in the instances of csum_and_copy_...();
the changes of actual asm code behind them are done later in the series.
Note that this asm code is often shared with csum_partial_copy_nocheck();
the difference is that csum_partial_copy_nocheck() passes 0 for initial
sum while csum_and_copy_..._user() pass 0xffffffff. Fortunately, we are
free to pass 0xffffffff in all cases and subsequent patches will use that
freedom without any special comments.
A part that could be split off: parisc and uml/i386 claimed to have
csum_and_copy_to_user() instances of their own, but those were identical
to the generic one, so we simply drop them. Not sure if it's worth
a separate commit...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Preparation for the change of calling conventions; right now all
callers pass 0 as initial sum. Passing 0xffffffff instead yields
the values comparable mod 0xffff and guarantees that 0 will not
be returned on success.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
