There is no reason that calls to block_unblock_all_queues() from different
context can't race with one another, so protect with the
sdebug_host_list_mutex. There's no need for a more fine-grained per shost
locking here (and we don't have a per-host lock anyway).
Also simplify some touched code in sdebug_change_qdepth().
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230327074310.1862889-5-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The shost list lock, sdebug_host_list_lock, is a spinlock. We would only
lock in non-atomic context in this driver, so use a mutex instead, which is
friendlier if we need to schedule when iterating.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230327074310.1862889-4-john.g.garry@oracle.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In clear_luns_changed_on_target(), we iter all devices for all shosts to
conditionally clear the SDEBUG_UA_LUNS_CHANGED flag in the per-device
uas_bm.
One condition to see whether we clear the flag is to test whether the host
for the device under consideration is the same as the matching device's
(devip) host. This check will only ever pass for devices for the same
shost, so only iter the devices for the matching device shost.
We can now drop the spinlock'ing of the sdebug_host_list_lock in the same
function. This will allow us to use a mutex instead of the spinlock for the
global shost lock, as clear_luns_changed_on_target() could be called in
non-blocking context, in scsi_debug_queuecommand() -> make_ua() ->
clear_luns_changed_on_target() (which is why required a spinlock).
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230327074310.1862889-3-john.g.garry@oracle.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is a report that the blktests scsi/004 test for "TASK SET FULL" (TSF)
now fails.
The condition upon we should issue this TSF is when the sdev queue is
full. The check for a full queue has an off-by-1 error. Previously we would
increment the number of requests in the queue after testing if the queue
would be full, i.e. test if one less than full. Since we now use
scsi_device_busy() to count the number of requests in the queue, this would
already account for the current request, so fix the test for queue full
accordingly.
Fixes: 151f0ec9dd ("scsi: scsi_debug: Drop sdebug_dev_info.num_in_q")
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/oe-lkp/202303201334.18b30edc-oliver.sang@intel.com
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230327074310.1862889-2-john.g.garry@oracle.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently commands completed via poll mode are not included in the
statistics gathering for deferred completions and missed CPUs.
Poll mode completions should be treated the same as other deferred
completion types, so add poll mode completions to the statistics.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Link: https://lore.kernel.org/r/20230313093114.1498305-12-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The command abort feature allows us to test aborting a command which has
timed-out.
The idea is that for specific commands we just don't call scsi_done() and
allow the request to timeout, which ensures SCSI EH kicks-in we try to
abort the command.
Since commit 4a0c6f432d ("scsi: scsi_debug: Add new defer type for
mq_poll") this does not seem to work. The issue is that we clear the
sd_dp->aborted flag in schedule_resp() before the completion callback has
run. When the completion callback actually runs, it calls scsi_done() as
normal as sd_dp->aborted unset. This is all very racy.
Fix by not clearing sd_dp->aborted in schedule_resp(). Also move the call
to blk_abort_request() from schedule_resp() to sdebug_q_cmd_complete(),
which makes the code have a more logical sequence.
I also note that this feature only works for commands which are classed as
"SDEG_RES_IMMED_MASK", but only practically triggered with prior RW
commands. So for my experiment I need to run fio to trigger the error on
the "nth" command (see inject_on_this_cmd()), and then run something like
sg_sync to queue a command to actually trigger the abort.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Link: https://lore.kernel.org/r/20230313093114.1498305-11-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In schedule_resp(), under certain conditions we check whether the
per-device queue is full (num_in_q == queue depth - 1) and we may inject a
"task set full" (TSF) error if it is.
However how we read num_in_q is racy - many threads may see the same "queue
is full" value (and also issue a TSF).
There is per-queue locking in reading per-device num_in_q, but that would
not help.
Replace how we read num_in_q at this location with a call to
scsi_device_busy(). Calling scsi_device_busy() is likewise racy (as reading
num_in_q), so nothing lost or gained. Calling scsi_device_busy() is also
slow as it needs to read all bits in the per-device budget bitmap, but we
can live with that since we're just a simulator and it's only under a
certain configs which we would see this.
Also move the "task set full" print earlier as it would only be called now
under this condition. However, previously it may not have been called -
like returning early - but keep it simple and always call it.
At this point we can drop sdebug_dev_info.num_in_q - it is difficult to
maintain properly and adds extra normal case command processing.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Link: https://lore.kernel.org/r/20230313093114.1498305-10-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The per-device num_in_q value cannot exceed the device queue depth, so drop
the check.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Link: https://lore.kernel.org/r/20230313093114.1498305-9-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The check for device pointer for the SCSI command is unnecessary, so drop
it.
The only caller is scsi_try_host_reset() -> eh_host_reset_handler(), and
there that pointer cannot be NULL.
Indeed, there is already code later in the same function which does not
check the device pointer for the SCSI command.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Link: https://lore.kernel.org/r/20230313093114.1498305-8-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The checks for SCSI cmnd, SCSI device, and SCSI host are unnecessary, so
drop them. Likewise, drop the NULL check for sdbg_host.
The only caller is scsi_try_bus_reset() -> eh_bus_reset_handler(), and
there those pointers cannot be NULL.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Link: https://lore.kernel.org/r/20230313093114.1498305-7-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The checks for SCSI cmnd, SCSI device, and SCSI host are unnecessary, so
drop them. Likewise, drop the NULL check for sdbg_host.
The only caller is scsi_try_target_reset() -> eh_target_reset_handler(),
and there those pointers cannot be NULL.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Link: https://lore.kernel.org/r/20230313093114.1498305-6-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The SCSI cmnd pointer arg would never be NULL, so drop the check. In
addition, its SCSI device pointer would never be NULL (so drop that check
also).
The only caller is scsi_try_bus_device_reset(), and the command and its
device pointer could not be NULL when calling eh_device_reset_handler()
there.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Link: https://lore.kernel.org/r/20230313093114.1498305-5-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The SCSI cmnd pointer arg would never be NULL, so drop the check. In
addition, its SCSI device pointer would never be NULL.
The only caller is scsi_send_eh_cmnd() -> scsi_abort_eh_cmnd() ->
scsi_try_to_abort_cmd() -> scsi_try_to_abort_cmd(), and in the origin of
that chain those pointers cannot be NULL.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Link: https://lore.kernel.org/r/20230313093114.1498305-4-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In sdebug_device_create(), the devip->sdbg_host pointer is needlessly set
twice, so stop doing that.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Link: https://lore.kernel.org/r/20230313093114.1498305-3-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This driver stores just a pointer to the driver host structure in
host->hostdata[]. Most other drivers actually have the driver host
structure allocated in host->hostdata[], but this driver is different as we
allocate that memory separately before allocating the shost memory.
However there is no need to allocate this memory only in host->hostdata[]
when we can already look up the driver host structure from shost->dma_dev,
so add a macro for this - shost_to_sdebug_host(). Rename to_sdebug_host()
-> dev_to_sdebug_host() to avoid ambiguity.
Also remove a check for !sdbg_host in find_build_dev_info(), as this cannot
be true. Other similar checks will be later removed.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230313093114.1498305-2-john.g.garry@oracle.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Updates to the usual drivers (target, ufs, smartpqi, lpfc). There are
some core changes, mostly around reworking some of our user context
assumptions in device put and moving some code around. The remaining
updates are bug fixes and minor changes.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCY5jjrSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishR9iAPwN++uF
BNlCD36duS8LslKQMPAmFxWt3d/4RWAHsXj2WQEAtu9q8K9PSe1ueb4y+rAEG4oj
2AUQhR3v9ciWBBKlDog=
=JYJC
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (target, ufs, smartpqi, lpfc).
There are some core changes, mostly around reworking some of our user
context assumptions in device put and moving some code around.
The remaining updates are bug fixes and minor changes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (138 commits)
scsi: sg: Fix get_user() in call sg_scsi_ioctl()
scsi: megaraid_sas: Fix some spelling mistakes in comment
scsi: core: Use SCSI_SCAN_INITIAL in do_scsi_scan_host()
scsi: core: Use SCSI_SCAN_RESCAN in __scsi_add_device()
scsi: ufs: ufs-mediatek: Remove unnecessary return code
scsi: ufs: core: Fix the polling implementation
scsi: libsas: Do not export sas_ata_wait_after_reset()
scsi: hisi_sas: Fix SATA devices missing issue during I_T nexus reset
scsi: libsas: Add smp_ata_check_ready_type()
scsi: Revert "scsi: hisi_sas: Don't send bcast events from HW during nexus HA reset"
scsi: Revert "scsi: hisi_sas: Drain bcast events in hisi_sas_rescan_topology()"
scsi: ufs: ufs-mediatek: Modify the return value
scsi: ufs: ufs-mediatek: Remove unneeded code
scsi: device_handler: alua: Call scsi_device_put() from non-atomic context
scsi: device_handler: alua: Revert "Move a scsi_device_put() call out of alua_check_vpd()"
scsi: snic: Fix possible UAF in snic_tgt_create()
scsi: qla2xxx: Initialize vha->unknown_atio_[list, work] for NPIV hosts
scsi: qla2xxx: Remove duplicate of vha->iocb_work initialization
scsi: fcoe: Fix transport not deattached when fcoe_if_init() fails
scsi: sd: Use 16-byte SYNCHRONIZE CACHE on ZBC devices
...
The 2nd return statement in inquiry_vpd_b0() is unreachable, so delete it.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20221213142122.1011886-1-john.g.garry@oracle.com
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-----BEGIN PGP SIGNATURE-----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=QRhK
-----END PGP SIGNATURE-----
Merge tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
- Replace prandom_u32_max() and various open-coded variants of it,
there is now a new family of functions that uses fast rejection
sampling to choose properly uniformly random numbers within an
interval:
get_random_u32_below(ceil) - [0, ceil)
get_random_u32_above(floor) - (floor, U32_MAX]
get_random_u32_inclusive(floor, ceil) - [floor, ceil]
Coccinelle was used to convert all current users of
prandom_u32_max(), as well as many open-coded patterns, resulting in
improvements throughout the tree.
I'll have a "late" 6.1-rc1 pull for you that removes the now unused
prandom_u32_max() function, just in case any other trees add a new
use case of it that needs to converted. According to linux-next,
there may be two trivial cases of prandom_u32_max() reintroductions
that are fixable with a 's/.../.../'. So I'll have for you a final
conversion patch doing that alongside the removal patch during the
second week.
This is a treewide change that touches many files throughout.
- More consistent use of get_random_canary().
- Updates to comments, documentation, tests, headers, and
simplification in configuration.
- The arch_get_random*_early() abstraction was only used by arm64 and
wasn't entirely useful, so this has been replaced by code that works
in all relevant contexts.
- The kernel will use and manage random seeds in non-volatile EFI
variables, refreshing a variable with a fresh seed when the RNG is
initialized. The RNG GUID namespace is then hidden from efivarfs to
prevent accidental leakage.
These changes are split into random.c infrastructure code used in the
EFI subsystem, in this pull request, and related support inside of
EFISTUB, in Ard's EFI tree. These are co-dependent for full
functionality, but the order of merging doesn't matter.
- Part of the infrastructure added for the EFI support is also used for
an improvement to the way vsprintf initializes its siphash key,
replacing an sleep loop wart.
- The hardware RNG framework now always calls its correct random.c
input function, add_hwgenerator_randomness(), rather than sometimes
going through helpers better suited for other cases.
- The add_latent_entropy() function has long been called from the fork
handler, but is a no-op when the latent entropy gcc plugin isn't
used, which is fine for the purposes of latent entropy.
But it was missing out on the cycle counter that was also being mixed
in beside the latent entropy variable. So now, if the latent entropy
gcc plugin isn't enabled, add_latent_entropy() will expand to a call
to add_device_randomness(NULL, 0), which adds a cycle counter,
without the absent latent entropy variable.
- The RNG is now reseeded from a delayed worker, rather than on demand
when used. Always running from a worker allows it to make use of the
CPU RNG on platforms like S390x, whose instructions are too slow to
do so from interrupts. It also has the effect of adding in new inputs
more frequently with more regularity, amounting to a long term
transcript of random values. Plus, it helps a bit with the upcoming
vDSO implementation (which isn't yet ready for 6.2).
- The jitter entropy algorithm now tries to execute on many different
CPUs, round-robining, in hopes of hitting even more memory latencies
and other unpredictable effects. It also will mix in a cycle counter
when the entropy timer fires, in addition to being mixed in from the
main loop, to account more explicitly for fluctuations in that timer
firing. And the state it touches is now kept within the same cache
line, so that it's assured that the different execution contexts will
cause latencies.
* tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (23 commits)
random: include <linux/once.h> in the right header
random: align entropy_timer_state to cache line
random: mix in cycle counter when jitter timer fires
random: spread out jitter callback to different CPUs
random: remove extraneous period and add a missing one in comments
efi: random: refresh non-volatile random seed when RNG is initialized
vsprintf: initialize siphash key using notifier
random: add back async readiness notifier
random: reseed in delayed work rather than on-demand
random: always mix cycle counter in add_latent_entropy()
hw_random: use add_hwgenerator_randomness() for early entropy
random: modernize documentation comment on get_random_bytes()
random: adjust comment to account for removed function
random: remove early archrandom abstraction
random: use random.trust_{bootloader,cpu} command line option only
stackprotector: actually use get_random_canary()
stackprotector: move get_random_canary() into stackprotector.h
treewide: use get_random_u32_inclusive() when possible
treewide: use get_random_u32_{above,below}() instead of manual loop
treewide: use get_random_u32_below() instead of deprecated function
...
Afer commit 1fa5ae857b ("driver core: get rid of struct device's bus_id
string array"), the name of device is allocated dynamically, it needs be
freed when device_register() returns error.
As comment of device_register() says, one should use put_device() to give
up the reference in the error path. Fix this by calling put_device(), then
the name can be freed in kobject_cleanup(), and sdbg_host is freed in
sdebug_release_adapter().
When the device release is not set, it means the device is not initialized.
We can not call put_device() in this case. Use kfree() to free memory.
Fixes: 1fa5ae857b ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221112131010.3757845-1-yangyingliang@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
As 'alloc_len' is user controlled data, if user tries to allocate memory
larger than(>=) MAX_ORDER, then kcalloc() will fail, it creates a stack
trace and messes up dmesg with a warning.
Add __GFP_NOWARN in order to avoid too large allocation warning. This is
detected by static analysis using smatch.
Fixes: 7db0e0c819 ("scsi: scsi_debug: Fix buffer size of REPORT ZONES command")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20221112070612.2121535-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
As 'vnum' is controlled by user, so if user tries to allocate memory larger
than(>=) MAX_ORDER, then kcalloc() will fail, it creates a stack trace and
messes up dmesg with a warning.
Add __GFP_NOWARN in order to avoid too large allocation warning. This is
detected by static analysis using smatch.
Fixes: c3e2fe9222 ("scsi: scsi_debug: Implement VERIFY(10), add VERIFY(16)")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20221112070031.2121068-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This is a simple mechanical transformation done by:
@@
expression E;
@@
- prandom_u32_max
+ get_random_u32_below
(E)
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Reviewed-by: SeongJae Park <sj@kernel.org> # for damon
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
As 'lbdof_blen' is coming from user, if the size in kzalloc() is >=
MAX_ORDER then we hit a warning.
Call trace:
sg_ioctl
sg_ioctl_common
scsi_ioctl
sg_scsi_ioctl
blk_execute_rq
blk_mq_sched_insert_request
blk_mq_run_hw_queue
__blk_mq_delay_run_hw_queue
__blk_mq_run_hw_queue
blk_mq_sched_dispatch_requests
__blk_mq_sched_dispatch_requests
blk_mq_dispatch_rq_list
scsi_queue_rq
scsi_dispatch_cmd
scsi_debug_queuecommand
schedule_resp
resp_write_scat
If you try to allocate a memory larger than(>=) MAX_ORDER, then kmalloc()
will definitely fail. It creates a stack trace and messes up dmesg. The
user controls the size here so if they specify a too large size it will
fail.
Add __GFP_NOWARN in order to avoid too large allocation warning. This is
detected by static analysis using smatch.
Fixes: 481b5e5c79 ("scsi: scsi_debug: add resp_write_scat function")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20221111100526.1790533-1-harshit.m.mogalapalli@oracle.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If device_register() fails in sdebug_add_host_helper(), it will goto clean
and sdbg_host will be freed, but sdbg_host->host_list will not be removed
from sdebug_host_list, then list traversal may cause UAF. Fix it.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221117084421.58918-1-yuancan@huawei.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
From ZBC-1:
- RC BASIS = 0: The RETURNED LOGICAL BLOCK ADDRESS field indicates the
highest LBA of a contiguous range of zones that are not sequential write
required zones starting with the first zone.
- RC BASIS = 1: The RETURNED LOGICAL BLOCK ADDRESS field indicates the LBA
of the last logical block on the logical unit.
The current scsi_debug READ CAPACITY response does not comply with the
above if there are one or more sequential write required zones. SCSI
initiators need a way to retrieve the largest valid LBA from SCSI
devices. Reporting the largest valid LBA if there are one or more
sequential zones requires to set the RC BASIS field in the READ CAPACITY
response to one. Hence this patch.
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221102193248.3177608-1-bvanassche@acm.org
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since blk_mq_map_queues() and the .map_queues() callbacks always return 0,
change their return type into void. Most callers ignore the returned value
anyway.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Doug Gilbert <dgilbert@interlog.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Acked-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20220815170043.19489-3-bvanassche@acm.org
[axboe: fold in fix from Bart]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a write command to a sequential write required or sequential write
preferred zone result in the zone write pointer reaching the end of the
zone, the zone condition must be set to full AND the number of implicitly
or explicitly open zones updated to have a correct accounting for zone
resources. However, the function zbc_inc_wp() only sets the zone condition
to full without updating the open zone counters, resulting in a zone state
machine breakage.
Introduce the helper function zbc_set_zone_full() and use it in
zbc_inc_wp() to correctly transition zones to the full condition.
Link: https://lore.kernel.org/r/20220608011302.92061-1-damien.lemoal@opensource.wdc.com
Fixes: f0d1cf9378 ("scsi: scsi_debug: Add ZBC zone commands")
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add the 'zone_cap_mb' kernel module parameter. This parameter defines the
zone capacity. The zone capacity must be less than or equal to the zone
size.
Report that sequential write zones and gap zones are paired in the Zoned
Block Device Characteristics VPD page (page B6h).
This patch has been tested as follows:
modprobe scsi_debug delay=0 sector_size=512 dev_size_mb=128 zbc=host-managed zone_nr_conv=16 zone_size_mb=4 zone_cap_mb=3
modprobe brd rd_nr=1 rd_size=$((1<<20))
mkfs.f2fs -m /dev/ram0 -c /dev/${scsi_debug_dev}
mount /dev/ram0 /mnt
# Run a fio job that uses /mnt
Link: https://lore.kernel.org/r/20220421183023.3462291-10-bvanassche@acm.org
Cc: Douglas Gilbert <dgilbert@interlog.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
[ bvanassche: Switched to reporting a constant zone starting LBA granularity ]
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Rename the scsi_debug zone type constants to prevent a conflict with the
ZBC_ZONE_TYPE_GAP constant from include/scsi/scsi_proto.h.
Link: https://lore.kernel.org/r/20220421183023.3462291-9-bvanassche@acm.org
Cc: Douglas Gilbert <dgilbert@interlog.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
[ bvanassche: Extracted these changes from a larger patch ]
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Change a single occurrence of "nad" into "and".
Link: https://lore.kernel.org/r/20220421183023.3462291-8-bvanassche@acm.org
Cc: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Revert the patch mentioned in the subject since it blocks I/O after module
unload has started while this is a legitimate use case. For e.g. blktests
test case srp/001 that patch causes a command timeout to be triggered for
the following call stack:
__schedule+0x4c3/0xd20
schedule+0x82/0x110
schedule_timeout+0x122/0x200
io_schedule_timeout+0x7b/0xc0
__wait_for_common+0x2bc/0x380
wait_for_completion_io_timeout+0x1d/0x20
blk_execute_rq+0x1db/0x200
__scsi_execute+0x1fb/0x310
sd_sync_cache+0x155/0x2c0 [sd_mod]
sd_shutdown+0xbb/0x190 [sd_mod]
sd_remove+0x5b/0x80 [sd_mod]
device_remove+0x9a/0xb0
device_release_driver_internal+0x2c5/0x360
device_release_driver+0x12/0x20
bus_remove_device+0x1aa/0x270
device_del+0x2d4/0x640
__scsi_remove_device+0x168/0x1a0
scsi_forget_host+0xa8/0xb0
scsi_remove_host+0x9b/0x150
sdebug_driver_remove+0x3d/0x140 [scsi_debug]
device_remove+0x6f/0xb0
device_release_driver_internal+0x2c5/0x360
device_release_driver+0x12/0x20
bus_remove_device+0x1aa/0x270
device_del+0x2d4/0x640
device_unregister+0x18/0x70
sdebug_do_remove_host+0x138/0x180 [scsi_debug]
scsi_debug_exit+0x45/0xd5 [scsi_debug]
__do_sys_delete_module.constprop.0+0x210/0x320
__x64_sys_delete_module+0x1f/0x30
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Link: https://lore.kernel.org/r/20220409043704.28573-1-bvanassche@acm.org
Fixes: 2aad3cd853 ("scsi: scsi_debug: Address races following module load")
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: Yi Zhang <yi.zhang@redhat.com>
Cc: Bob Pearson <rpearsonhpe@gmail.com>
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The in_use_bm bitmap of struct sdebug_queue should be accessed under
protection of the qc_lock spinlock. Make sure that this lock is taken
before calling find_first_bit() at the beginning of the function
sdebug_blk_mq_poll().
Link: https://lore.kernel.org/r/20220404045547.579887-1-damien.lemoal@opensource.wdc.com
Fixes: 3fd07aecb7 ("scsi: scsi_debug: Fix qc_lock use in sdebug_blk_mq_poll()")
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This series consists of the usual driver updates (qla2xxx, pm8001,
libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates
and bug fixes. The high blast radius core update is the removal of
write same, which affects block and several non-SCSI devices. The
other big change, which is more local, is the removal of the SCSI
pointer.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYjzDQyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishQMYAQDEWUGV
6U0+736AHVtOfiMNfiRN79B1HfXVoHvemnPcTwD/UlndwFfy/3GGOtoZmqEpc73J
Ec1HDuUCE18H1H2QAh0=
=/Ty9
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (qla2xxx, pm8001,
libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates
and bug fixes.
The high blast radius core update is the removal of write same, which
affects block and several non-SCSI devices. The other big change,
which is more local, is the removal of the SCSI pointer"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (281 commits)
scsi: scsi_ioctl: Drop needless assignment in sg_io()
scsi: bsg: Drop needless assignment in scsi_bsg_sg_io_fn()
scsi: lpfc: Copyright updates for 14.2.0.0 patches
scsi: lpfc: Update lpfc version to 14.2.0.0
scsi: lpfc: SLI path split: Refactor BSG paths
scsi: lpfc: SLI path split: Refactor Abort paths
scsi: lpfc: SLI path split: Refactor SCSI paths
scsi: lpfc: SLI path split: Refactor CT paths
scsi: lpfc: SLI path split: Refactor misc ELS paths
scsi: lpfc: SLI path split: Refactor VMID paths
scsi: lpfc: SLI path split: Refactor FDISC paths
scsi: lpfc: SLI path split: Refactor LS_RJT paths
scsi: lpfc: SLI path split: Refactor LS_ACC paths
scsi: lpfc: SLI path split: Refactor the RSCN/SCR/RDF/EDC/FARPR paths
scsi: lpfc: SLI path split: Refactor PLOGI/PRLI/ADISC/LOGO paths
scsi: lpfc: SLI path split: Refactor base ELS paths and the FLOGI path
scsi: lpfc: SLI path split: Introduce lpfc_prep_wqe
scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4
scsi: lpfc: SLI path split: Refactor lpfc_iocbq
scsi: lpfc: Use kcalloc()
...
The use of the 'locked' boolean variable to control locking and unlocking
of the qc_lock spinlock of struct sdebug_queue confuses sparse, leading to
a warning about an unexpected unlock. Simplify the qc_lock lock/unlock
handling code of this function to avoid this warning by removing the
'locked' boolean variable. This change also fixes unlocked access to the
in_use_bm bitmap with the find_first_bit() function.
Link: https://lore.kernel.org/r/20220301113009.595857-3-damien.lemoal@opensource.wdc.com
Fixes: b05d4e481e ("scsi: scsi_debug: Refine sdebug_blk_mq_poll()")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The return statement inside the sdeb_read_lock(), sdeb_read_unlock(),
sdeb_write_lock() and sdeb_write_unlock() confuse sparse, leading to many
warnings about unexpected unlocks in the resp_xxx() functions.
Modify the lock/unlock functions using the __acquire() and __release()
inline annotations for the sdebug_no_rwlock == true case to avoid these
warnings.
Link: https://lore.kernel.org/r/20220301113009.595857-2-damien.lemoal@opensource.wdc.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is no good reason to keep genhd.h separate from the main blkdev.h
header that includes it. So fold the contents of genhd.h into blkdev.h
and remove genhd.h entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220124093913.742411-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Log subpages are starting to appear in real devices (e.g. SSDs) so add
support for one. Adopt approach where all "wild" sub-pages are themselves
listed as long as there is at least one non-wild page or subpage for a
given page number.
Link: https://lore.kernel.org/r/20220109012853.301953-10-dgilbert@interlog.com
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
By default, this driver places a read lock around all user data fetches and
a write lock around all user data modifying operations (e.g. WRITE
commands). These locks have "per store" granularity. Other drivers that
have a similar function (e.g. null_blk) do not take this data integrity
step and run significantly faster in some tests.
In the common case of a (simulated) device to device copy (e.g. what dd
and its variants do) there should be no need for locks around data
accesses. So add the driver and sysfs parameter no_rwlock which is boolean
and when set does what its name suggests. The default is false for backward
comaptibility.
Link: https://lore.kernel.org/r/20220109012853.301953-7-dgilbert@interlog.com
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
To distinguish between resets sent by the SCSI mid-level error
handling and newly introduced devices (LUs), this Unit Attention:
power on, reset, or bus reset occurred [0x29,0x0]
has been subdivided into that UA for the reset case and this new UA:
power on occurred [0x29,0x1]
for the new device (LU) case. This makes debug a little easier to follow
when it is turned on (e.g. 'echo 0x1 > opts').
Bump driver version number.
Link: https://lore.kernel.org/r/20220109012853.301953-6-dgilbert@interlog.com
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Refine the sdebug_blk_mq_poll() function so it only takes the spinlock on
the queue when it can see one or more requests with the in_use bitmap flag
set.
Link: https://lore.kernel.org/r/20220109012853.301953-5-dgilbert@interlog.com
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When the internal in_use bit array in this driver is full returning
SCSI_MLQUEUE_HOST_BUSY leads to the mid-level reissuing the request which
is unhelpful. Previously TASK SET FULL status was only returned if ALL_TSF
[0x400] is placed in the opts variable (at load time or via sysfs). Now
ignore that setting and always return TASK SET FULL when in_use array is
full. Also set DID_ABORT together with TASK SET FULL so the mid-level gives
up immediately.
Aside: the situations addressed by this patch lead to lockups and
timeouts. They have only been detected when blk_poll() is used. That
mechanism is relatively new in the SCSI subsystem suggesting the mid-level
may need more work in that area.
Link: https://lore.kernel.org/r/20220109012853.301953-4-dgilbert@interlog.com
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When scsi_debug is loaded as a module with many (simulated) hosts, targets,
and devices (LUs), modprobe can take a long time to return. Only a small
amount of this time is spent in the scsi_debug_init(); the rest is other
parts of the kernel reacting to to the appearance of new storage
devices. As soon as scsi_debug_init() has completed the user space may call
'rmmod scsi_debug' and this was found to cause race problems as outlined
here:
https://bugzilla.kernel.org/show_bug.cgi?id=212337
To reliably generate this race a sysfs parameter called rm_all_hosts was
added and the code was strengthened in this area. The main change was to
make the count of scsi_debug hosts present an atomic. Then it was found
that the handling of the existing add_host parameter needed the same
strengthening. Further: 'echo -9999 >
/sys/bus/pseudo/drivers/scsi_debug/add_host has the same effect as
rm_all_hosts so rm_all_hosts was not needed.
To inhibit a race between two invocations of writes to add_host, a mutex
was added. Also address a possible race when rmmod is called but LUs are
still being added.
The logic to remove (all) hosts is rather crude: it works backwards down a
linked lists of hosts. Any pending requests are terminated with
DID_NO_CONNECT as are any new requests. In the case where not all hosts are
being removed, the ones that remain may have lost requests as just
outlined. The lowest numbered host (id) hosts will remain.
Cc: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220109012853.301953-2-dgilbert@interlog.com
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
According to ZBC and SPC specifications, the unit of ALLOCATION LENGTH
field of REPORT ZONES command is byte. However, current scsi_debug
implementation handles it as number of zones to calculate buffer size to
report zones. When the ALLOCATION LENGTH has a large number, this results
in too large buffer size and causes memory allocation failure. Fix the
failure by handling ALLOCATION LENGTH as byte unit.
Link: https://lore.kernel.org/r/20211207010638.124280-1-shinichiro.kawasaki@wdc.com
Fixes: f0d1cf9378 ("scsi: scsi_debug: Add ZBC zone commands")
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When a reset is requested the position of the write pointer is updated but
the data in the corresponding zone is not cleared. Instead scsi_debug
returns any data written before the write pointer was reset. This is an
error and prevents using scsi_debug for stale page cache testing of the
BLKRESETZONE ioctl.
Zero written data in the zone when resetting the write pointer.
Link: https://lore.kernel.org/r/20211122061223.298890-1-shinichiro.kawasaki@wdc.com
Fixes: f0d1cf9378 ("scsi: scsi_debug: Add ZBC zone commands")
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This series is all the stragglers that didn't quite make the first
merge window pull. It's mostly minor updates and bug fixes of merge
window code but it also has two driver updates: ufs and qla2xxx.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYY5mOyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishXpjAQDboVkH
7RQblJf8AKDMjN2baSIrmbk7qEUqzRgo6Ef3egEAi044Gx4KqBwzBLiCREcFW/Mt
F95pt5udsLypGhpfZlE=
=fiv8
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"This series is all the stragglers that didn't quite make the first
merge window pull. It's mostly minor updates and bug fixes of merge
window code but it also has two driver updates: ufs and qla2xxx"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (46 commits)
scsi: scsi_debug: Don't call kcalloc() if size arg is zero
scsi: core: Remove command size deduction from scsi_setup_scsi_cmnd()
scsi: scsi_ioctl: Validate command size
scsi: ufs: ufshpb: Properly handle max-single-cmd
scsi: core: Avoid leaving shost->last_reset with stale value if EH does not run
scsi: bsg: Fix errno when scsi_bsg_register_queue() fails
scsi: sr: Remove duplicate assignment
scsi: ufs: ufs-exynos: Introduce ExynosAuto v9 virtual host
scsi: ufs: ufs-exynos: Multi-host configuration for ExynosAuto v9
scsi: ufs: ufs-exynos: Support ExynosAuto v9 UFS
scsi: ufs: ufs-exynos: Add pre/post_hce_enable drv callbacks
scsi: ufs: ufs-exynos: Factor out priv data init
scsi: ufs: ufs-exynos: Add EXYNOS_UFS_OPT_SKIP_CONFIG_PHY_ATTR option
scsi: ufs: ufs-exynos: Support custom version of ufs_hba_variant_ops
scsi: ufs: ufs-exynos: Add setup_clocks callback
scsi: ufs: ufs-exynos: Add refclkout_stop control
scsi: ufs: ufs-exynos: Simplify drv_data retrieval
scsi: ufs: ufs-exynos: Change pclk available max value
scsi: ufs: Add quirk to enable host controller without PH configuration
scsi: ufs: Add quirk to handle broken UIC command
...
This series consists of the usual driver updates (ufs, smartpqi, lpfc,
target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
fixes. Notable core changes are the removal of scsi->tag which caused
some churn in obsolete drivers and a sweep through all drivers to call
scsi_done() directly instead of scsi->done() which removes a pointer
indirection from the hot path and a move to register core sysfs files
earlier, which means they're available to KOBJ_ADD processing, which
necessitates switching all drivers to using attribute groups.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYYUfBCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbUJAQDZt4oc
vUx9JpyrdHxxTCuOzVFd8W1oJn0k5ltCBuz4yAD8DNbGhGm93raMSJ3FOOlzLEbP
RG8vBdpxMudlvxAPi/A=
=BSFz
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, smartpqi, lpfc,
target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
fixes.
Notable core changes are the removal of scsi->tag which caused some
churn in obsolete drivers and a sweep through all drivers to call
scsi_done() directly instead of scsi->done() which removes a pointer
indirection from the hot path and a move to register core sysfs files
earlier, which means they're available to KOBJ_ADD processing, which
necessitates switching all drivers to using attribute groups"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
scsi: lpfc: Update lpfc version to 14.0.0.3
scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss
scsi: lpfc: Fix link down processing to address NULL pointer dereference
scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted
scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine
scsi: lpfc: Correct sysfs reporting of loop support after SFP status change
scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset
scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup()
scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer
scsi: ufs: mediatek: Avoid sched_clock() misuse
scsi: mpt3sas: Make mpt3sas_dev_attrs static
scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions
scsi: target: core: Stop using bdevname()
scsi: aha1542: Use memcpy_{from,to}_bvec()
scsi: sr: Add error handling support for add_disk()
scsi: sd: Add error handling support for add_disk()
scsi: target: Perform ALUA group changes in one step
scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path
scsi: target: Fix alua_tg_pt_gps_count tracking
scsi: target: Fix ordered tag handling
...
John Garry