An earlier commit removed the access to variable runtime
and we are now left with unused variable that is redundant,
so remove it.
Cleans up the clang warning: Value stored to 'runtime' is never read
Fixes: e11f0f90a6 ("ALSA: pcm: remove SNDRV_PCM_IOCTL1_INFO internal command")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some ioctl functions are implemented individually for both playback
and capture streams although most of the codes are identical with just
a few different stream-specific function calls. This patch unifies
these places, removes the superfluous trivial check and flattens the
call paths as a cleanup. Meanwhile, for better readability, some
codes (e.g. xfer ioctls or forward/rewind ioctls) are factored out as
functions.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently we're taking power_lock at each card component for assuring
the power-up sequence, but it doesn't help anything in the
implementation at the moment: it just serializes unnecessarily the
callers, but it doesn't protect about the power state change itself.
It used to have some usefulness in the early days where we managed the
PM manually. But now the suspend/resume core procedure is beyond our
hands, and power_lock lost its meaning.
This patch drops the power_lock from allover the places.
There shouldn't be any issues by this change, as it's no helper
regarding the power state change. Rather we'll get better performance
by removing the serialization; which is the only slight concern of any
behavior change, but it can't be a showstopper, after all.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
PCM OSS emulation issues the drain ioctl without power lock. It used
to work in the earlier kernels as the power lock was taken inside
snd_pcm_drain() itself. But since 68b4acd322 ("ALSA: pcm: Apply
power lock globally to common ioctls"), the power lock is taken
outside the function. Due to that change, the call via OSS emulation
leads to the unbalanced power lock, thus it deadlocks.
As a quick fix, just take the power lock before snd_pcm_drain() call
for OSS emulation path. A better cleanup will follow later.
Fixes: 68b4acd322 ("ALSA: pcm: Apply power lock globally to common ioctls")
Reported-and-tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Small last-minute fixes for 4.13-rc1: a couple of PCM fixes for m68k,
a cleanup work for legacy ISA msnd driver, and a few HD-audio new IDs
and quirks.
-----BEGIN PGP SIGNATURE-----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=tGl3
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Small last-minute fixes for 4.13-rc1: a couple of PCM fixes for m68k,
a cleanup work for legacy ISA msnd driver, and a few HD-audio new IDs
and quirks"
* tag 'sound-fix-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Add hdmi id for a Geminilake variant
ALSA: hda/realtek - New codec device ID for ALC1220
ALSA: pcm: Simplify check for dma_mmap_coherent() availability
ALSA: pcm: Protect call to dma_mmap_coherent() by check for HAS_DMA
ALSA: msnd: Optimize / harden DSP and MIDI loops
ALSA: hda/realtek - change the location for one of two front microphones
ALSA: opl4: Move inline before return type
We check the availability of dma_mmap_coherent() in hw_support_mmap()
but with an ugly ifdef of lots of arch-checks. Now we have a nice
CONFIG_ARCH_NO_COHERENT_DMA_MMAP kconfig, and this can be used
together with CONFIG_HAS_DMA check for a cleaner and more
comprehensive check.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If NO_DMA=y:
sound/core/pcm_native.o: In function `snd_pcm_lib_default_mmap':
pcm_native.c:(.text+0x144c): undefined reference to `bad_dma_ops'
pcm_native.c:(.text+0x1474): undefined reference to `dma_common_mmap'
Add a check for HAS_DMA to fix this.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This development cycle resulted in a fair amount of changes in both
core and driver sides. The most significant change in ALSA core is
about PCM. Also the support of of-graph card and the new DAPM widget
for DSP are noteworthy changes in ASoC core. And there're lots of
small changes splat over the tree, as you can see in diffstat.
Below are a few highlights:
ALSA core:
- Removal of set_fs() hackery from PCM core stuff, and the code
reorganization / optimization thereafter
- Improved support of PCM ack ops, and a new ABI for improved
control/status mmap handling
- Lots of constifications in various codes
ASoC core:
- The support of of-graph card, which may work as a better generic
device for a replacement of simple-card
- New widget types intended mainly for use with DSPs
ASoC drivers:
- New drivers for Allwinner V3s SoCs
- Ensonic ES8316 codec support
- More Intel SKL and KBL works
- More device support for Intel SST Atom (mostly for cheap tablets and
2-in-1 devices)
- Support for Rockchip PDM controllers
- Support for STM32 I2S and S/PDIF controllers
- Support for ZTE AUD96P22 codecs
HD-audio:
- Support of new Realtek codecs (ALC215/ALC285/ALC289), more quirks
for HP and Dell machines
- A few more fixes for i915 component binding
Note that of-graph change may bring the conflicts with a later pull
request of devicetree, as currently found in linux-next.
-----BEGIN PGP SIGNATURE-----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=PUEh
-----END PGP SIGNATURE-----
Merge tag 'sound-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This development cycle resulted in a fair amount of changes in both
core and driver sides. The most significant change in ALSA core is
about PCM. Also the support of of-graph card and the new DAPM widget
for DSP are noteworthy changes in ASoC core. And there're lots of
small changes splat over the tree, as you can see in diffstat.
Below are a few highlights:
ALSA core:
- Removal of set_fs() hackery from PCM core stuff, and the code
reorganization / optimization thereafter
- Improved support of PCM ack ops, and a new ABI for improved
control/status mmap handling
- Lots of constifications in various codes
ASoC core:
- The support of of-graph card, which may work as a better generic
device for a replacement of simple-card
- New widget types intended mainly for use with DSPs
ASoC drivers:
- New drivers for Allwinner V3s SoCs
- Ensonic ES8316 codec support
- More Intel SKL and KBL works
- More device support for Intel SST Atom (mostly for cheap tablets
and 2-in-1 devices)
- Support for Rockchip PDM controllers
- Support for STM32 I2S and S/PDIF controllers
- Support for ZTE AUD96P22 codecs
HD-audio:
- Support of new Realtek codecs (ALC215/ALC285/ALC289), more quirks
for HP and Dell machines
- A few more fixes for i915 component binding"
* tag 'sound-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (418 commits)
ALSA: hda - Fix unbalance of i915 module refcount
ASoC: Intel: Skylake: Remove driver debugfs exit
ASoC: Intel: Skylake: explicitly add the headers sst-dsp.h
ALSA: hda/realtek - Remove GPIO_MASK
ALSA: hda/realtek - Fix typo of pincfg for Dell quirk
ALSA: pcm: add a documentation for tracepoints
ALSA: atmel: ac97c: fix error return code in atmel_ac97c_probe()
ALSA: x86: fix error return code in hdmi_lpe_audio_probe()
ASoC: Intel: Skylake: Add support to read firmware registers
ASoC: Intel: Skylake: Add sram address to sst_addr structure
ASoC: Intel: Skylake: Debugfs facility to dump module config
ASoC: Intel: Skylake: Add debugfs support
ASoC: fix semicolon.cocci warnings
ASoC: rt5645: Add quirk override by module option
ASoC: rsnd: make arrays path and cmd_case static const
ASoC: audio-graph-card: add widgets and routing for external amplifier support
ASoC: audio-graph-card: update bindings for amplifier support
ASoC: rt5665: calibration should be done before jack detection
ASoC: rsnd: constify dev_pm_ops structures.
ASoC: nau8825: change crosstalk-bypass property to bool type
...
Now that user-space (typically alsa-lib) can specify which protocol
version it supports, we can optimize the kernel code depending on the
reported protocol version.
In this patch, we change the previous hack for enforcing the appl_ptr
sync by disabling status/control mmap. Instead of forcibly disabling
both mmaps, we disable only the control mmap when user-space declares
the supported protocol version new enough. For older user-space,
still both PCM status and control mmaps are disabled when requested by
the driver due to the compatibility reason.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We have an ioctl to inform the PCM protocol version the running kernel
supports, but there is no way to know which protocol version the
user-space can understand. This lack of information caused headaches
in the past when we tried to extend the ABI. For example, because we
couldn't guarantee the validity of the reserved bytes, we had to
introduce a new ioctl SNDRV_PCM_IOCTL_STATUS_EXT for assigning a few
new fields in the formerly reserved bits. If we could know that it's
a new alsa-lib, we could assume the availability of the new fields,
thus we could have reused the existing SNDRV_PCM_IOCTL_STATUS.
In order to improve the ABI extensibility, this patch adds a new ioctl
for user-space to inform its supporting protocol version to the
kernel. By reporting the supported protocol from user-space, the
kernel can judge which feature should be provided and which not.
With the addition of the new ioctl, the PCM protocol version is bumped
to 2.0.14, too. User-space checks the kernel protocol version via
SNDRV_PCM_INFO_PVERSION, then it sets the supported version back via
SNDRV_PCM_INFO_USER_PVERSION.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently x86 platforms use the PCM status/control mmaps for
transferring the PCM status and appl_ptr between kernel and
user-spaces. The mmap is a most efficient way of communication, but
it has a drawback per its nature, namely, it can't notify the change
explicitly to kernel.
The lack of appl_ptr update notification is a problem on a few
existing drivers, but it's mostly a small issue and negligible.
However, a new type of driver that uses DSP for a deep buffer
management requires the exact position of appl_ptr for calculating the
buffer prefetch size, and the asynchronous appl_ptr update between
kernel and user-spaces becomes a significant problem for it.
How can we enforce user-space to report the appl_ptr update? The way
is relatively simple. Just by disabling the PCM control mmap, the
user-space is supposed to fall back to the mode using SYNC_PTR ioctl,
and the kernel gets control over that. This fallback mode is used in
all non-x86 platforms as default, and also in the 32bit compatible
model on all platforms including x86. It's been implemented already
over a decade, so we can say it's fairly safe and stably working.
With the help of the knowledge above, this patch introduces a new PCM
info flag SNDRV_PCM_INFO_SYNC_APPLPTR for achieving the appl_ptr sync
from user-space. When a driver sets this flag at open, the PCM status
/ control mmap is disabled, which effectively switches to SYNC_PTR
mode in user-space side.
In this version, both PCM status and control mmaps are disabled
although only the latter, control mmap, is the target. It's because
the current alsa-lib implementation supposes that both status and
control mmaps are always coupled, thus it handles a fatal error when
only one of them fails.
Of course, the disablement of the status/control mmaps may bring a
slight performance overhead. Thus, as of now, this should be used
only for the dedicated devices that deserves.
Note that the disablement of mmap is a sort of workaround. In the
later patch, we'll introduce the way to identify the protocol version
alsa-lib supports, and keep mmap working while the sync_ptr is
performed together.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Rename:
wait_queue_t => wait_queue_entry_t
'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue",
but in reality it's a queue *entry*. The 'real' queue is the wait queue head,
which had to carry the name.
Start sorting this out by renaming it to 'wait_queue_entry_t'.
This also allows the real structure name 'struct __wait_queue' to
lose its double underscore and become 'struct wait_queue_entry',
which is the more canonical nomenclature for such data types.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Just a tidy up to follow the standard EXPORT_SYMBOL*() declarations
in order to improve grep-ability.
- Remove superfluous blank line before EXPORT_SYMBOL*() lines
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Drivers can implement 'struct snd_pcm_ops.ioctl' to handle some requests
from ALSA PCM core. These requests are internal purpose in kernel land.
Usually common set of operations are used for it.
SNDRV_PCM_IOCTL1_INFO is one of the requests. According to code comment,
it has been obsoleted in the old days.
We can see old releases in ftp.alsa-project.org. The command was firstly
introduced in v0.5.0 release as SND_PCM_IOCTL1_INFO, to allow drivers to
fill data of 'struct snd_pcm_channel_info' type. In v0.9.0 release,
this was obsoleted by the other commands for ioctl(2) such as
SNDRV_PCM_IOCTL_CHANNEL_INFO.
This commit removes the long-abandoned command, bye.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Calling PREPARE ioctl to the stream in either PAUSED or SUSPENDED
state may confuse some drivers that don't handle the state properly.
Instead of fixing each driver, PCM core should take care of the proper
state change before actually trying to (re-)prepare the stream.
Namely, when the stream is in PAUSED state, it triggers PAUSE_RELEASE,
and when in SUSPENDED state, it triggers STOP, before calling prepare
callbacks.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
So far, the PCM core refuses DROP ioctl when the stream in the
suspended state. This was basically to avoid the invalid state change
*during* the suspend. But since we protect the power change globally
in the common PCM ioctl caller side, it's guaranteed that
snd_pcm_drop() is called at the right power state. So we can assume
that the drop of stream is safe immediately after SUSPENDED state.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
All PCM common ioctls should run only in the powered up state, but
currently only a few ioctls do the proper snd_power_lock() and
snd_power_wait() invocations. Instead of adding to each place, do it
commonly in the caller side, so that all these ioctls are assured to
be operated at the power up state.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use snd_pcm_action_lock_irq() helper instead of open coding.
No functional change.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In a series of recent work, ALSA PCM core got some arrangements to handle
application-side position on PCM buffer. However, relevant codes still
disperse to two translation units
This commit unifies these codes into a helper function.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At present, trace events are probed even if corresponding parameter is
not actually changed. This is inconvenient.
This commit improves the behaviour.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When refining mask/interval parameters, helper functions can return error
code. This error is not handled immediately. This seems to return
parameters to userspace applications in its meddle of processing.
However, in general, when receiving error from system calls, the
application might not handle argument buffer. It's reasonable to
judge the above design as superfluity.
This commit handles the error immediately.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Results of ioctl(2) with SNDRV_PCM_IOCTL_HW_REFINE and
SNDRV_PCM_IOCTL_HW_PARAMS are different, because the latter has single
value for several parameters; e.g. channels of PCM substream. Selection
of the single value is done independently of application of constraints.
It's helpful for developers to trace the selection process.
This commit adds tracepoints to snd_pcm_hw_params_choose() for the
purpose.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As of v4.12, snd_pcm_hw_params_choose() is just called in a process
context of ioctl(2) with SNDRV_PCM_IOCTL_HW_PARAMS. The function locates
in a different file, which has no tracepoints.
This commit moves the function to a file with the tracepoints for later
commit.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When drivers register no flags about information of PCM hardware, ALSA
PCM core fixups it roughly. Currently, this operation places in a
function snd_pcm_hw_refine(). It can be moved to a function
fixup_unreferenced_params() because it doesn't affects operations
between these two functions.
This idea is better to bundle codes with similar purposes and this commit
achieves it.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A structure for parameters of PCM runtime has parameters which are
not classified as mask/interval type. They are decided only when
corresponding normal parameters have unique values.
* struct snd_pcm_hw_params.msbits
* struct snd_pcm_hw_params.rate_num
* struct snd_pcm_hw_params.rate_den
* struct snd_pcm_hw_params.fifo_size
Current implementation of hw_params ioctl sometimes doesn't decide these
parameters even if corresponding parameters are fixed, because these
parameters are evaluated before a call of snd_pcm_hw_params_choose().
This commit adds a helper function to process the parameters and call it
in proper positions.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To fixup some parameters, ALSA PCM core refers the other parameters as
constants. There're some macros for this purpose.
This commit replaces codes with them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Drivers add rules of parameters to runtime of PCM substream, when
applications open ALSA PCM character device. When applications call
ioctl(2) with SNDRV_PCM_IOCTL_HW_REFINE or SNDRV_PCM_IOCTL_HW_PARAMS, the
rules are applied to the parameters and return the result to user space.
The rule can have dependency between parameters. Additionally, it can have
condition flags about application of rules. Userspace applications can
indicate the flags to suppress change of parameters.
This commit attempts to describe the mechanism.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A commit 8bea869c5e ("ALSA: PCM midlevel: improve fifo_size handling")
allows drivers to implement calculation of fifo size in parameter
structure. This calculation runs only when two of the other parameters
have single value.
In ALSA PCM core, there're some helper functions for the case. This commit
applies the functions instead of value comparison.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit modifies current for readability in below aspects:
- use bool type variable instead of int type variable assigned to 0/1
- move variable definition from loop to top of the function definition
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A local variable is used to judge whether a parameter should be handled
due to reverse dependency of the other rules. However, this can be
obsoleted by check of a sentinel in dependency array.
This commit removes the local variable and check the sentinel to reduce
stack usage.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In a process to calculate parameters of PCM substream, application of all
rules is iterated several times till parameter dependencies are satisfied.
In current implementation, two loops are used for the design, however this
brings two-level indentation and decline readability.
This commit attempts to reduce the indentation by using goto statement,
instead of outer while loop.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Application of rules to parameters of PCM substream is done in a call of
snd_pcm_hw_refine(), while the function includes much codes and is not
enough friendly to readers.
This commit splits the codes to a separated function so that readers can
get it easily. I leave desicion into compilers to merge the function into
its callee.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Application of constraints to interval-type parameters for PCM substream
is done in a call of snd_pcm_hw_refine(), while the function includes
much codes and is not enough friendly to readers.
This commit splits the codes to a separated function so that readers can
get it easily. I leave desicion into compilers to merge the function into
its callee.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Application of constraints to mask-type parameters for PCM substream is
done in a call of snd_pcm_hw_refine(), while the function includes much
codes and is not enough friendly to readers.
This commit splits the codes to a separated function so that readers can
get it easily. I leave desicion into compilers to merge the function into
its callee.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In a previous commit, tracepoints are added for PCM parameter processing.
As long as I know, this implementation increases size of relocatable
object by 35%. For vendors who are conscious of memory footprint, it
brings apparent disadvantage.
This commit utilizes CONFIG_SND_DEBUG configuration to enable/disable the
tracepoints.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When working for devices which support configurable modes for its data
transmission or which consists of several components, developers are
likely to use rules of parameters of PCM substream. However, there's no
infrastructure to assist their work.
In old days, ALSA PCM core got a local 'RULES_DEBUG' macro to debug
refinement of parameters for PCM substream. Although this is merely a
makeshift. With some modifications, we get the infrastructure.
This commit is for the purpose. Refinement of mask/interval type of
PCM parameters is probed as tracepoint events as 'hw_mask_param' and
'hw_interval_param' on existent 'snd_pcm' subsystem.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Several files are used to construct PCM core module, a.k.a snd-pcm.
Although available APIs are described in 'include/sound/pcm.h', some of
them are not exported as symbols in kernel space. Such APIs are just for
module local usage.
This commit adds module local header file and move some function prototypes
into it so that scopes of them are controlled properly and developers
get no confusion from unavailable symbols.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Although the ack callback is supposed to be called at each appl_ptr or
hw_ptr update, we missed a few opportunities: namely, forward, rewind
and sync_ptr.
Formerly calling ack at rewind may have leaded to unexpected results
due to the forgotten negative appl_ptr update in indirect-PCM helper,
which is the major user of the PCM ack callback. But now we fixed
this oversights, thus we can call ack callback safely even at rewind
callback -- of course with the proper handling of the error from the
callback.
This patch adds the calls of ack callback in the places mentioned in
the above.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
PCM core code has a few usages of set_fs(), mostly for two codepaths:
- The DELAY ioctl call from pcm_compat.c
- The ioctl wrapper in kernel context for PCM OSS and other
This patch removes the set_fs() usage in these places by a slight code
refactoring. For the former point, snd_pcm_delay() is changed to
return the value directly instead of putting the value to the given
address. Each caller stores the result in an appropriate manner.
For fixing the latter, snd_pcm_lib_kernel_ioctl() is changed to call
the functions directly as well. For achieving it, now the function
accepts only the limited set of ioctls that have been used, so far.
The primary user of this function is the PCM OSS layer, and the only
other user is USB UAC1 gadget driver. Both drivers don't need the
full set of ioctls.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Factor out the common codes in snd_pcm_*_forward() and *_rewind()
functions to simplify the codes. No functional changes.
Reviewd-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The mostly same codes for checking the current PCM state and calling
hwsync are found in a few places. This patch simplifies them by
creating a common helper function.
It also fixes a couple of cases where we missed the proper state check
(e.g. PAUSED state wasn't handled in rewind and snd_pcm_hwsync()),
too.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA pcm core has hw_param_interval_c() to pick up parameter with const
qualifier for safe programming.
This commit applies it to the cases.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There's a read-only table for each sampling rate, while it doesn't have
const qualifier and can be modified.
This commit add the qualifier. As a result, a symbol for the table
moves from .data section to .rodata.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix up affected files that include this signal functionality via sched.h.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
->fault(), ->page_mkwrite(), and ->pfn_mkwrite() calls do not need to
take a vma and vmf parameter when the vma already resides in vmf.
Remove the vma parameter to simplify things.
[arnd@arndb.de: fix ARM build]
Link: http://lkml.kernel.org/r/20170125223558.1451224-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/148521301778.19116.10840599906674778980.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When the stream is in suspended state some applications wait
on "Stream Pipe Error" in response to snd_pcm_avail call to
resume the stream.
In the current implementation snd_pcm_avail() returns zero
when the stream is in suspended state. This causes application
to enter in infinite loop for frames to be available.
"Stream pipe Error" code is getting returned for read/write
call when the stream is in suspended state. Similarly update
snd_pcm_avail to return -ESTRPIPE.
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We can't return a negative error code from the poll callback the return
type is unsigned and is checked against the poll specific flags we need
to return POLLERR if we encounter an error.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A non-atomic PCM stream may take snd_pcm_link_rwsem rw semaphore twice
in the same code path, e.g. one in snd_pcm_action_nonatomic() and
another in snd_pcm_stream_lock(). Usually this is OK, but when a
write lock is issued between these two read locks, the problem
happens: the write lock is blocked due to the first reade lock, and
the second read lock is also blocked by the write lock. This
eventually deadlocks.
The reason is the way rwsem manages waiters; it's queued like FIFO, so
even if the writer itself doesn't take the lock yet, it blocks all the
waiters (including reads) queued after it.
As a workaround, in this patch, we replace the standard down_write()
with an spinning loop. This is far from optimal, but it's good
enough, as the spinning time is supposed to be relatively short for
normal PCM operations, and the code paths requiring the write lock
aren't called so often.
Reported-by: Vinod Koul <vinod.koul@intel.com>
Tested-by: Ramesh Babu <ramesh.babu@intel.com>
Cc: <stable@vger.kernel.org> # v3.18+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The action_ops structures are never modified, so declare them as const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
PCM timer is not always used. For embedded device, we need an interface
to disable it when it is not needed, to shrink the kernel size and
memory footprint, here add CONFIG_SND_PCM_TIMER for it.
When both CONFIG_SND_PCM_TIMER and CONFIG_SND_TIMER is unselected,
about 25KB saving bonus we can get.
Please be noted that when disabled, those stubs who using pcm timer
(e.g. dmix, dsnoop & co) may work incorrectlly.
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_release_substream() always calls hw_free op when the stream
was opened. This is superfluous in most cases because it's been
already released via explicit hw_free ioctl. Although this double
call is usually OK as this callback should be written to be called
multiple times, it's better to avoid superfluous calls.
Reported-by: Vinod Koul <vinod.koul@intel.com>
Tested-by: Jeeja Kp <jeeja.kp@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As far as I can see, having an invalid ->tstamp_mode is harmless, but
adding a check silences a static checker warning.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With the nonatomic PCM ops, the system may spew lockdep warnings like:
=============================================
[ INFO: possible recursive locking detected ]
4.2.0-rc1-jeejaval3 #12 Not tainted
---------------------------------------------
aplay/4029 is trying to acquire lock:
(snd_pcm_link_rwsem){.+.+.+}, at: [<ffffffff816fd473>] snd_pcm_stream_lock+0x43/0x60
but task is already holding lock:
(snd_pcm_link_rwsem){.+.+.+}, at: [<ffffffff816fcf29>] snd_pcm_action_nonatomic+0x29/0x80
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(snd_pcm_link_rwsem);
lock(snd_pcm_link_rwsem);
Although this is false-positive as the rwsem is taken always as
read-only for these code paths, it's certainly annoying to see this at
any occasion. A simple fix is to use down_read_nested() in
snd_pcm_stream_lock() that can be called inside another lock.
Reported-by: Vinod Koul <vinod.koul@intel.com>
Reported-by: Jeeja Kp <jeeja.kp@intel.com>
Tested-by: Jeeja Kp <jeeja.kp@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There have been major modernization with the standard bus: in ALSA
sequencer core and HD-audio. Also, HD-audio receives the regmap
support replacing the in-house cache register cache code. These
changes shouldn't impact the existing behavior, but rather
refactoring.
In addition, HD-audio got the code split to a core library part and
the "legacy" driver parts. This is a preliminary work for adapting
the upcoming ASoC HD-audio driver, and the whole transition is still
work in progress, likely finished in 4.1.
Along with them, there are many updates in ASoC area as usual, too:
lots of cleanups, Intel code shuffling, etc.
Here are some highlights:
ALSA core:
- PCM: the audio timestamp / wallclock enhancement
- PCM: fixes in DPCM management
- Fixes / cleanups of user-space control element management
- Sequencer: modernization using the standard bus
HD-audio:
- Modernization using the standard bus
- Regmap support
- Use standard runtime PM for codec power saving
- Widget-path based power-saving for IDT, VIA and Realtek codecs
- Reorganized sysfs entries for each codec object
- More Dell headset support
ASoC:
- Move of jack registration to the card level
- Lots of ASoC cleanups, mainly moving things from the CODEC level
to the card level
- Support for DAPM routes specified by both the machine driver and DT
- Continuing improvements to rcar
- pcm512x enhacements
- Intel platforms updates
- rt5670 updates / fixes
- New platforms / devices: some non-DSP Qualcomm platforms, Google's
Storm platform, Maxmim MAX98925 CODECs and the Ingenic JZ4780 SoC
Misc:
- ice1724: Improved ESI W192M support
- emu10k1: Emu 1010 fixes/enhancement
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=4z5j
-----END PGP SIGNATURE-----
Merge tag 'sound-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"There have been major modernization with the standard bus: in ALSA
sequencer core and HD-audio. Also, HD-audio receives the regmap
support replacing the in-house cache register cache code. These
changes shouldn't impact the existing behavior, but rather
refactoring.
In addition, HD-audio got the code split to a core library part and
the "legacy" driver parts. This is a preliminary work for adapting
the upcoming ASoC HD-audio driver, and the whole transition is still
work in progress, likely finished in 4.1.
Along with them, there are many updates in ASoC area as usual, too:
lots of cleanups, Intel code shuffling, etc.
Here are some highlights:
ALSA core:
- PCM: the audio timestamp / wallclock enhancement
- PCM: fixes in DPCM management
- Fixes / cleanups of user-space control element management
- Sequencer: modernization using the standard bus
HD-audio:
- Modernization using the standard bus
- Regmap support
- Use standard runtime PM for codec power saving
- Widget-path based power-saving for IDT, VIA and Realtek codecs
- Reorganized sysfs entries for each codec object
- More Dell headset support
ASoC:
- Move of jack registration to the card level
- Lots of ASoC cleanups, mainly moving things from the CODEC level to
the card level
- Support for DAPM routes specified by both the machine driver and DT
- Continuing improvements to rcar
- pcm512x enhacements
- Intel platforms updates
- rt5670 updates / fixes
- New platforms / devices: some non-DSP Qualcomm platforms, Google's
Storm platform, Maxmim MAX98925 CODECs and the Ingenic JZ4780 SoC
Misc:
- ice1724: Improved ESI W192M support
- emu10k1: Emu 1010 fixes/enhancement"
* tag 'sound-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (411 commits)
ALSA: hda - set GET bit when adding a vendor verb to the codec regmap
ALSA: hda/realtek - Enable the ALC292 dock fixup on the Thinkpad T450
ALSA: hda - Fix another race in runtime PM refcounting
ALSA: hda - Expose codec type sysfs
ALSA: ctl: fix to handle several elements added by one operation for userspace element
ASoC: Intel: fix array_size.cocci warnings
ASoC: n810: Automatically disconnect non-connected pins
ASoC: n810: Consistently pass the card DAPM context to n810_ext_control()
ASoC: davinci-evm: Use card DAPM context to access widgets
ASoC: mop500_ab8500: Use card DAPM context to access widgets
ASoC: wm1133-ev1: Use card DAPM context to access widgets
ASoC: atmel: Improve machine driver compile test coverage
ASoC: atmel: Add dependency to SND_SOC_I2C_AND_SPI where necessary
ALSA: control: Fix a typo of SNDRV_CTL_ELEM_ACCESS_TLV_* with SNDRV_CTL_TLV_OP_*
ALSA: usb-audio: Don't attempt to get Microsoft Lifecam Cinema sample rate
ASoC: rnsd: fix build regression without CONFIG_OF
ALSA: emu10k1: add toggles for E-mu 1010 optical ports
ALSA: ctl: fill identical information to return value when adding userspace elements
ALSA: ctl: fix a bug to return no identical information in info operation for userspace controls
ALSA: ctl: confirm to return all identical information in 'activate' event
...
readv() and writev() should _not_ ignore all but the first ->iov_len,
among other things. Really weird abuse of those syscalls - it
expects a vector element per channel, with identical lengths (it
actually assumes them to be identical - no checking is done).
readv() and writev() are really bad match for that. Unfortunately,
userland API is userland API and we can't do anything about them.
Converted to ->read_iter/->write_iter. Please, _please_ don't do
anything of that kind when designing new interfaces.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
struct kiocb now is a generic I/O container, so move it to fs.h.
Also do a #include diet for aio.h while we're at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
A selection of changes for v4.1 so far. The main things are:
- Move of jack registration to the card where it belongs.
- Support for DAPM routes specified by both the machine driver and DT.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJU960DAAoJECTWi3JdVIfQkKIH/RDvxRn8dvKOPF5U9Uix3chH
JWKkzqfsMP0EpmQTzCQPp0ShAyYcWSbYsopicynPxUem5vS4Z8+UmOgEEgkj59pK
USbF6v1jCQXA6BcbKyUcRRBD9FtRkfVDc7mYbRs2CcwQz2CGCgee41cvPM+2BT+z
QdNC9UJARSweGvE1IUJSfpfYOly+BJ2s0/28RaQ0PGt+I0auoYx7IMFgMSDjv2p6
PY0kyQiwm3Kyj2uNXPZ5gEuPxlw/t8n4fbQNrBYAvxzN+EF5NrGdKE3N7MI1xRV/
EkFhzy+uM3X9c37tb2lT2fgPFlBc9rgPuLPSyoQ6nxa5ghCqAlgRhzpxRem8hhU=
=VlCw
-----END PGP SIGNATURE-----
Merge tag 'asoc-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Changes for v4.1
A selection of changes for v4.1 so far. The main things are:
- Move of jack registration to the card where it belongs.
- Support for DAPM routes specified by both the machine driver and DT.
When a PCM draining is performed to an empty stream that has been
already in PREPARED state, the current code just ignores and leaves as
it is, although the drain is supposed to set all such streams to SETUP
state. This patch covers that overlooked case.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Introduce more generic .get_time_info to retrieve
system timestamp and audio timestamp in single routine.
Backwards compatibility is preserved with same functionality
as with .wall_clock method (to be removed in following commits
to avoid breaking git bisect)
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Let userspace select audio timestamp config when the
STATUS_EXT ioctl is used, ignore and zero all
other fields
No change for the existing STATUS ioctl, parameters
are treated as read-only.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Don't use generic snapshot of trigger_tstamp if low-level driver or
hardware can get a more precise value for better audio/system time
synchronization.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
timestamp in RUNNING mode is already taken in update_hw_ptr routine,
getting a new timestamp introduces offset between hw_ptr, audio_tstamp
and system time
Add else condition to read timestamp as fallback and only when
enabled
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add SNDRV_PCM_TRIGGER_DRAIN trigger for pcm drain.
Some audio devices require notification of drain events
in order to properly drain and shutdown an audio stream.
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix a copy & paste error:
Warning(sound/core/pcm_native.c:1112): Excess function parameter 'state' description in 'snd_pcm_stop_xrun'
The state argument was dropped from snd_pcm_stop_xrun().
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a new helper function snd_pcm_stop_xrun() to the standard sequnce
lock/snd_pcm_stop(XRUN)/unlock by a single call, and replace the
existing open codes with this helper.
The function checks the PCM running state to prevent setting the wrong
state, too, for more safety.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some state changes (e.g. snd_pcm_stop()) sets the runtime state after
calling snd_timer_notify(). This is basically racy, since the
notification may wakes up the user even before the state change.
Although the possibility is low, we should set the state before the
notifications.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The function snd_pcm_action_lock_irq() can be much simplified by
simply wrapping snd_pcm_action() with the stream lock. This was
rather the original idea, but later it was open coded for
optimization. However, looking at the optimization part closely, one
notices that the probability of the optimized path is quite low; in
normal situations, the linked stream action happens only for the
triggered substream, thus the operation becomes identical. So the
code simplification has a clear win, especially because we have now
doubly codes for both atomic and non-atomic locks.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On x86, using dma_mmap_coherent() for the pages allocated via
dma_alloc_coherent() results in a warning like:
aplay:32536 map pfn RAM range req uncached-minus for [mem 0x21d500000-0x21d51ffff], got write-back
Until the issue is addressed in the core side, take back to the old
good way in PCM code only for x86.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some architectures like PARISC is known not to support mmap properly
with the DMA buffer, where dma_mmap_coherent() returns -EINVAL
unconditionally. From the API POV, we should rather drop the mmap
support there and expose it before the user-space tries to call mmap.
The patch contains again ugly ifdef's, unfortunately, as there is no
global flag indicating this. Once when such macro is defined, we can
get rid of this instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since we have consistently dma_mmap_coherent() for all architectures,
the current ifdef and arch-specific codes in pcm core can be cleaned
up gracefully.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As PCM core handles the multiple linked streams in parallel, lockdep
gets confused (partly because of weak annotations) and spews the
false-positive warnings. This hasn't been a problem for long time but
the latest PCM lock path update seems to have woken up a sleeping
dog.
Here is an attempt to paper over this issue: pass the lock subclass
just calculated from the depth in snd_pcm_action_group(). Also, a
(possibly) wrong lock subclass set in snd_pcm_action_lock_mutex() is
dropped, too.
Reported-and-tested-by: Arthur Marsh <arthur.marsh@internode.on.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In the unlock loop of snd_pcm_action_group(), the object "s" is used
as the check of nonatomic PCM, but it should be rather "s1", which is
the iterator of the loop. This supposedly causes a kernel panic when
the substreams in operatino are linked.
Fixes: 257f8cce5d ('ALSA: pcm: Allow nonatomic trigger operations')
Reported-and-tested-by: Arthur Marsh <arthur.marsh@internode.on.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The previous commit for the non-atomic PCM ops added more codes to
snd_pcm_stream_lock() and its variants. Since they are inlined
functions, it resulted in a significant code size bloat. For reducing
the size bloat, this patch changes the inline functions to the normal
function calls. The export of rwlock and rwsem are removed as well,
since they are referred only in pcm_native.c now.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently, many PCM operations are performed in a critical section
protected by spinlock, typically the trigger and pointer callbacks are
assumed to be atomic. This is basically because some trigger action
(e.g. PCM stop after drain or xrun) is done in the interrupt handler.
If a driver runs in a threaded irq, however, this doesn't have to be
atomic. And many devices want to handle trigger in a non-atomic
context due to lengthy communications.
This patch tries all PCM calls operational in non-atomic context.
What it does is very simple: replaces the substream spinlock with the
corresponding substream mutex when pcm->nonatomic flag is set. The
driver that wants to use the non-atomic PCM ops just needs to set the
flag and keep the rest as is. (Of course, it must not handle any PCM
ops in irq context.)
Note that the code doesn't check whether it's atomic-safe or not, but
trust in 100% that the driver sets pcm->nonatomic correctly.
One possible problem is the case where linked PCM substreams have
inconsistent nonatomic states. For avoiding this, snd_pcm_link()
returns an error if one tries to link an inconsistent PCM substream.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For controlling the new fields more strictly, add sw_params.proto
field indicating the protocol version of the user-space. User-space
should fill the SNDRV_PCM_VERSION value it's built with, then kernel
can know whether the new fields should be evaluated or not.
And now tstamp_type field is evaluated only when the valid value is
set there. This avoids the wrong override of tstamp_type to zero,
which is SNDRV_PCM_TSTAMP_TYPE_GETTIMEOFDAY.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For allowing adjusting the timestamp type on the fly, add it to
sw_params. The existing ioctl is still kept for compatibility.
Along with this, increment the PCM protocol version.
The extension was suggested by Clemens Ladisch.
Acked-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
No functional change.
Acked-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use dev_err() & co as much as possible. If not available (no device
assigned at the calling point), use pr_xxx() helpers instead.
For simplicity, introduce new helpers for pcm stream, pcm_err(), etc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Replace the lengthy #if defined(XXX) || defined(XXX_MODULE) with the
new IS_ENABLED() macro.
The patch still doesn't cover all ifdefs. For example, the dependency
on CONFIG_GAMEPORT is still open-coded because this also has an extra
dependency on MODULE. Similarly, an open-coded ifdef in pcm_oss.c and
some sequencer-related stuff are left untouched.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch fixed 2 typos in DocBook/alsa-driver-api.xml.
It is because this file is generated by make xmldocs,
I have to fix typos within source files.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It turned out that we can't use gen_pool_*() functions on archs
without CONFIG_GENERIC_ALLOCATOR (resulting in missing symbols), since
linux/genalloc.h doesn't provide dummy functions for all. We'd be
able to fix linux/genalloc.h size, but I take an easier path for
now...
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now it's quite common that an SoC contains its on-chip internal RAM.
By using this RAM space for DMA buffer during audio playback/record,
we can shutdown the voltage for external RAM to save power.
So add new DEV type with iram malloc()/free() and accordingly modify
current default mmap() for the iram circumstance.
Signed-off-by: Nicolin Chen <b42378@freescale.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A few more fixes, nothing too major though the DMA changes fix modular
builds.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=CgWu
-----END PGP SIGNATURE-----
Merge tag 'asoc-v3.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: More updates for v3.10
A few more fixes, nothing too major though the DMA changes fix modular
builds.
This is my example conversion of a few existing mmap users. The pcm
mmap case is one of the more straightforward ones.
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
script/kernel-doc reports the following type of warnings (when run in verbose
mode):
Warning(sound/core/init.c:152): No description found for return value of
'snd_card_create'
To fix that:
- add missing descriptions of function return values
- use "Return:" sections to describe those return values
Along the way:
- complete some descriptions
- fix some typos
Signed-off-by: Yacine Belkadi <yacine.belkadi.1@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Return the value obtained from snd_pcm_hw_constraint_minmax() instead
of -EINVAL. Silences the following smatch warning:
sound/core/pcm_native.c:2003 snd_pcm_hw_constraints_complete() info:
why not propagate 'err' from snd_pcm_hw_constraint_minmax() instead of -22?
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>