Commit Graph

366 Commits

Author SHA1 Message Date
Julia Lawall 703314b2db bcma: use semicolons rather than commas to separate statements
Replace commas with semicolons.  What is done is essentially described by
the following Coccinelle semantic patch (http://coccinelle.lip6.fr/):

// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1601233948-11629-6-git-send-email-Julia.Lawall@inria.fr
2020-10-01 16:23:50 +03:00
Linus Walleij a080ecb11a bcma: gpio: Use irqchip template
This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit call to gpiochip_irqchip_add().

The irqchip is instead added while adding the gpiochip.

Cc: Rafał Miłecki <rafal@milecki.pl>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200722111725.210923-1-linus.walleij@linaro.org
2020-08-02 18:26:51 +03:00
Zheng Yongjun 92d26d1abf drivers: bcma: remove set but not used variable `addrh` and `sizeh`
Fixes gcc '-Wunused-but-set-variable' warning:

drivers/bcma/scan.c: In function 'bcma_erom_get_addr_desc':
drivers/bcma/scan.c:219 warning:
variable `addrh` and `sizeh` set but not used [-Wunused-but-set-variable]

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200721083935.13306-1-zhengyongjun3@huawei.com
2020-08-02 18:26:18 +03:00
Linus Torvalds bd2463ac7d Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from David Miller:

 1) Add WireGuard

 2) Add HE and TWT support to ath11k driver, from John Crispin.

 3) Add ESP in TCP encapsulation support, from Sabrina Dubroca.

 4) Add variable window congestion control to TIPC, from Jon Maloy.

 5) Add BCM84881 PHY driver, from Russell King.

 6) Start adding netlink support for ethtool operations, from Michal
    Kubecek.

 7) Add XDP drop and TX action support to ena driver, from Sameeh
    Jubran.

 8) Add new ipv4 route notifications so that mlxsw driver does not have
    to handle identical routes itself. From Ido Schimmel.

 9) Add BPF dynamic program extensions, from Alexei Starovoitov.

10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes.

11) Add support for macsec HW offloading, from Antoine Tenart.

12) Add initial support for MPTCP protocol, from Christoph Paasch,
    Matthieu Baerts, Florian Westphal, Peter Krystad, and many others.

13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu
    Cherian, and others.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits)
  net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC
  udp: segment looped gso packets correctly
  netem: change mailing list
  qed: FW 8.42.2.0 debug features
  qed: rt init valid initialization changed
  qed: Debug feature: ilt and mdump
  qed: FW 8.42.2.0 Add fw overlay feature
  qed: FW 8.42.2.0 HSI changes
  qed: FW 8.42.2.0 iscsi/fcoe changes
  qed: Add abstraction for different hsi values per chip
  qed: FW 8.42.2.0 Additional ll2 type
  qed: Use dmae to write to widebus registers in fw_funcs
  qed: FW 8.42.2.0 Parser offsets modified
  qed: FW 8.42.2.0 Queue Manager changes
  qed: FW 8.42.2.0 Expose new registers and change windows
  qed: FW 8.42.2.0 Internal ram offsets modifications
  MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver
  Documentation: net: octeontx2: Add RVU HW and drivers overview
  octeontx2-pf: ethtool RSS config support
  octeontx2-pf: Add basic ethtool support
  ...
2020-01-28 16:02:33 -08:00
Christoph Hellwig 4bdc0d676a remove ioremap_nocache and devm_ioremap_nocache
ioremap has provided non-cached semantics by default since the Linux 2.6
days, so remove the additional ioremap_nocache interface.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2020-01-06 09:45:59 +01:00
yu kuai f427939391 bcma: remove set but not used variable 'sizel'
Fixes gcc '-Wunused-but-set-variable' warning:

drivers/bcma/scan.c: In function ‘bcma_erom_get_addr_desc’:

drivers/bcma/scan.c:222:20: warning: variable ‘sizel’ set but
not used [-Wunused-but-set-variable]

It is never used, and so can be removed.

Fixes: 8369ae33b7 ("bcma: add Broadcom specific AMBA bus driver")
Signed-off-by: yu kuai <yukuai3@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18 20:55:25 +02:00
Yadav Lamichhane 844e9d7c60 bcma: fix block comment style
Fix a coding style issue.

Signed-off-by: Yadav Lamichhane <tuxomega1@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-24 08:45:31 +03:00
Colin Ian King c57391f415 bcma: make arrays pwr_info_offset and sprom_sizes static const, shrinks object size
Arrays pwr_info_offset and sprom_sizes can be make static const rather
than populating them on the stack. Shrinks object size by 236 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
  11300	   1320	     64	  12684	   318c	drivers/bcma/sprom.o

After:
   text	   data	    bss	    dec	    hex	filename
  10904	   1480	     64	  12448	   30a0	drivers/bcma/sprom.o

(gcc version 9.2.1, amd64)

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13 16:44:49 +03:00
Colin Ian King 420c20be08 bcma: fix incorrect update of BCMA_CORE_PCI_MDIO_DATA
An earlier commit re-worked the setting of the bitmask and is now
assigning v with some bit flags rather than bitwise or-ing them
into v, consequently the earlier bit-settings of v are being lost.
Fix this by replacing an assignment with the bitwise or instead.

Addresses-Coverity: ("Unused value")
Fixes: 2be25cac84 ("bcma: add constants for PCI and use them")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03 16:44:02 +03:00
YueHaibing 0a60e0aa49 bcma: remove two unused variables
drivers/bcma/driver_mips.c:70:18: warning:
 ipsflag_irq_shift defined but not used [-Wunused-const-variable=]
drivers/bcma/driver_mips.c:62:18: warning:
 ipsflag_irq_mask defined but not used [-Wunused-const-variable=]

They are never used, so can be removed.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-03 16:37:53 +03:00
Chuhong Yuan 9236c1250c bcma: Use dev_get_drvdata
Instead of using to_pci_dev + pci_get_drvdata,
use dev_get_drvdata to make code simpler.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-08-06 15:25:28 +03:00
Rafał Miłecki 777bc4801a bcma: use dev_* printing functions
It provides more meaningful messages.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-01-10 13:39:19 +02:00
Rafał Miłecki 5a1c18b761 bcma: keep a direct pointer to the struct device
Accessing struct device is pretty useful/common so having a direct
pointer:
1) Simplifies some code
2) Makes bcma_bus_get_host_dev() unneeded
3) Allows further improvements like using dev_* printing helpers

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-01-10 13:39:18 +02:00
Boris Brezillon a58d0b4d51 bcma: Allow selection of this driver when COMPILE_TEST=y
This allows us to increase compile-test coverage without having to build
a kernel for MIPS.  That's particularly interesting for subsystem
maintainers that want to test as many drivers as possible in a single
build.

We also add a dependency on HAS_IOMEM in BCMA_HOST_SOC to make sure the
driver is not selected when the arch does not implement IO accessors.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-07-18 09:34:19 +02:00
Linus Torvalds e5a594643a dma-mapping updates for 4.18:
- replaceme the force_dma flag with a dma_configure bus method.
    (Nipun Gupta, although one patch is іncorrectly attributed to me
     due to a git rebase bug)
  - use GFP_DMA32 more agressively in dma-direct. (Takashi Iwai)
  - remove PCI_DMA_BUS_IS_PHYS and rely on the dma-mapping API to do the
    right thing for bounce buffering.
  - move dma-debug initialization to common code, and apply a few cleanups
    to the dma-debug code.
  - cleanup the Kconfig mess around swiotlb selection
  - swiotlb comment fixup (Yisheng Xie)
  - a trivial swiotlb fix. (Dan Carpenter)
  - support swiotlb on RISC-V. (based on a patch from Palmer Dabbelt)
  - add a new generic dma-noncoherent dma_map_ops implementation and use
    it for arc, c6x and nds32.
  - improve scatterlist validity checking in dma-debug. (Robin Murphy)
  - add a struct device quirk to limit the dma-mask to 32-bit due to
    bridge/system issues, and switch x86 to use it instead of a local
    hack for VIA bridges.
  - handle devices without a dma_mask more gracefully in the dma-direct
    code.
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCAApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAlsU1hwLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYPraxAAocC7JiFKW133/VugCtGA1x9uE8DPHealtsWTAeEq
 KOOB3GxWMU2hKqQ4km5tcfdWoGJvvab6hmDXcitzZGi2JajO7Ae0FwIy3yvxSIKm
 iH/ON7c4sJt8gKrXYsLVylmwDaimNs4a6xfODoCRgnWuovI2QrrZzupnlzPNsiOC
 lv8ezzcW+Ay/gvDD/r72psO+w3QELETif/OzR/qTOtvLrVabM06eHmPQ8Wb98smu
 /UPMMv6/3XwQnxpxpdyqN+p/gUdneXithzT261wTeZ+8gDXmcWBwHGcMBCimcoBi
 FklW52moazIPIsTysqoNlVFsLGJTeS4p2D3BLAp5NwWYsLv+zHUVZsI1JY/8u5Ox
 mM11LIfvu9JtUzaqD9SvxlxIeLhhYZZGnUoV3bQAkpHSQhN/xp2YXd5NWSo5ac2O
 dch83+laZkZgd6ryw6USpt/YTPM/UHBYy7IeGGHX/PbmAke0ZlvA6Rae7kA5DG59
 7GaLdwQyrHp8uGFgwze8P+R4POSk1ly73HHLBT/pFKnDD7niWCPAnBzuuEQGJs00
 0zuyWLQyzOj1l6HCAcMNyGnYSsMp8Fx0fvEmKR/EYs8O83eJKXi6L9aizMZx4v1J
 0wTolUWH6SIIdz474YmewhG5YOLY7mfe9E8aNr8zJFdwRZqwaALKoteRGUxa3f6e
 zUE=
 =6Acj
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping updates from Christoph Hellwig:

 - replace the force_dma flag with a dma_configure bus method. (Nipun
   Gupta, although one patch is іncorrectly attributed to me due to a
   git rebase bug)

 - use GFP_DMA32 more agressively in dma-direct. (Takashi Iwai)

 - remove PCI_DMA_BUS_IS_PHYS and rely on the dma-mapping API to do the
   right thing for bounce buffering.

 - move dma-debug initialization to common code, and apply a few
   cleanups to the dma-debug code.

 - cleanup the Kconfig mess around swiotlb selection

 - swiotlb comment fixup (Yisheng Xie)

 - a trivial swiotlb fix. (Dan Carpenter)

 - support swiotlb on RISC-V. (based on a patch from Palmer Dabbelt)

 - add a new generic dma-noncoherent dma_map_ops implementation and use
   it for arc, c6x and nds32.

 - improve scatterlist validity checking in dma-debug. (Robin Murphy)

 - add a struct device quirk to limit the dma-mask to 32-bit due to
   bridge/system issues, and switch x86 to use it instead of a local
   hack for VIA bridges.

 - handle devices without a dma_mask more gracefully in the dma-direct
   code.

* tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mapping: (48 commits)
  dma-direct: don't crash on device without dma_mask
  nds32: use generic dma_noncoherent_ops
  nds32: implement the unmap_sg DMA operation
  nds32: consolidate DMA cache maintainance routines
  x86/pci-dma: switch the VIA 32-bit DMA quirk to use the struct device flag
  x86/pci-dma: remove the explicit nodac and allowdac option
  x86/pci-dma: remove the experimental forcesac boot option
  Documentation/x86: remove a stray reference to pci-nommu.c
  core, dma-direct: add a flag 32-bit dma limits
  dma-mapping: remove unused gfp_t parameter to arch_dma_alloc_attrs
  dma-debug: check scatterlist segments
  c6x: use generic dma_noncoherent_ops
  arc: use generic dma_noncoherent_ops
  arc: fix arc_dma_{map,unmap}_page
  arc: fix arc_dma_sync_sg_for_{cpu,device}
  arc: simplify arc_dma_sync_single_for_{cpu,device}
  dma-mapping: provide a generic dma-noncoherent implementation
  dma-mapping: simplify Kconfig dependencies
  riscv: add swiotlb support
  riscv: only enable ZONE_DMA32 for 64-bit
  ...
2018-06-04 10:58:12 -07:00
Rafał Miłecki 361de091a4 bcma: fix buffer size caused crash in bcma_core_mips_print_irq()
Used buffer wasn't big enough to hold whole strings. Example output of
this function is:
[    0.180892] bcma: bus0: core 0x0800, irq: 2(S)* 3  4  5  6  D  I
[    0.180948] bcma: bus0: core 0x0812, irq: 2(S)  3* 4  5  6  D  I
[    0.180998] bcma: bus0: core 0x082d, irq: 2(S)  3  4* 5  6  D  I
[    0.181046] bcma: bus0: core 0x082c, irq: 2(S)  3  4  5  6  D  I*
which means we need to store up to 24 chars.

Fixes: 758f7e0606 ("bcma: Use bcma_debug and not pr_cont in MIPS driver")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Cc: stable@vger.kernel.org # v4.15+
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-12 11:36:59 +03:00
Christoph Hellwig 3d6ce86ee7 drivers: remove force dma flag from buses
With each bus implementing its own DMA configuration callback, there is no
need for bus to explicitly set the force_dma flag.  Modify the
of_dma_configure function to accept an input parameter which specifies if
implicit DMA configuration is required when it is not described by the
firmware.

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>  # PCI parts
Reviewed-by: Rob Herring <robh@kernel.org>
[hch: tweaked the changelog a bit]
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-03 16:25:08 +02:00
Matt Redfearn 79ca239a68 bcma: Prevent build of PCI host features in module
Attempting to build bcma.ko with BCMA_DRIVER_PCI_HOSTMODE=y results in
a build error due to use of symbols not exported from vmlinux:

ERROR: "pcibios_enable_device" [drivers/bcma/bcma.ko] undefined!
ERROR: "register_pci_controller" [drivers/bcma/bcma.ko] undefined!
make[1]: *** [scripts/Makefile.modpost:92: __modpost] Error 1

To prevent this, don't allow the host mode feature to be built if
CONFIG_BCMA=m

Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-13 18:47:47 +02:00
Denis 'GNUtoo' Carikli 985324a16e bcma: add HP Stream Notebook
In this laptop we have the following PCI device:
02:00.0 Network controller [0280]: Broadcom Limited BCM43142 802.11b/g/n [14e4:4365] (rev 01)
	Subsystem: Hewlett-Packard Company BCM43142 802.11b/g/n [103c:804a]
	[...]
	Region 0: Memory at 91000000 (64-bit, non-prefetchable) [size=32K]
	[...]

With this patch, we can now see its WiFi chip:
  bcma: bus0: Found chip with id 43142, rev 0x01 and package 0x08
  bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x28, class 0x0)
  bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x21, class 0x0)
  bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x16, class 0x0)
  bcma: bus0: Core 3 found: UNKNOWN (manuf 0x43B, id 0x368, rev 0x00, class 0x0)
  bcma: bus0: Found rev 15 PMU (capabilities 0x518C5E0F)
  bcma: bus0: SPROM offset 0x840
  bcma: bus0: Found SPROM revision 10
  bcma: bus0: Workarounds unknown or not needed for device 0xA886
  bcma: bus0: Bus registered

But it not yet supported by brcmsmac so it won't work for now:
  brcmsmac bcma0:1: brcms_b_attach wl0: vendor 0x14e4 device 0x4365
  brcmsmac: unknown device id 4365

Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-02-28 16:37:22 +02:00
Jia-Ju Bai 8100091d02 bcma: Replace mdelay with usleep_range in bcma_pmu_resources_init
After checking all possible call chains to bcma_pmu_resources_init() here,
my tool finds that this function is never called in atomic context,
namely never in an interrupt handler or holding a spinlock.
Thus mdelay can be replaced with usleep_range to avoid busy wait.

This is found by a static analysis tool named DCNS written by myself.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-02-27 15:52:13 +02:00
David S. Miller 8565d26bcb Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
The BPF verifier conflict was some minor contextual issue.

The TUN conflict was less trivial.  Cong Wang fixed a memory leak of
tfile->tx_array in 'net'.  This is an skb_array.  But meanwhile in
net-next tun changed tfile->tx_arry into tfile->tx_ring which is a
ptr_ring.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-19 22:59:33 -05:00
Guenter Roeck 664eadd6f4 bcma: Fix 'allmodconfig' and BCMA builds on MIPS targets
Mips builds with BCMA host mode enabled fail in mainline and -next
with:

In file included from include/linux/bcma/bcma.h:10:0,
                 from drivers/bcma/bcma_private.h:9,
		 from drivers/bcma/main.c:8:
include/linux/bcma/bcma_driver_pci.h:218:24: error:
	field 'pci_controller' has incomplete type

Bisect points to commit d41e6858ba ("MIPS: Kconfig: Set default MIPS
system type as generic") as the culprit. Analysis shows that the commmit
changes PCI configuration and enables PCI_DRIVERS_GENERIC. This in turn
disables PCI_DRIVERS_LEGACY. 'struct pci_controller' is, however, only
defined if PCI_DRIVERS_LEGACY is enabled.

Ultimately that means that BCMA_DRIVER_PCI_HOSTMODE depends on
PCI_DRIVERS_LEGACY. Add the missing dependency.

Fixes: d41e6858ba ("MIPS: Kconfig: Set default MIPS system type as ...")
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: James Hogan <jhogan@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-16 21:13:55 +02:00
Ashish Kalra a765c8fdc8 bcma: Adjust block comment
use * for block comments in multiple lines according to kernel coding
style

Reported by: checkpatch.pl

Signed-off-by: Ashish Kalra <eashishkalra@gmail.com>
Reviewed-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-07 15:33:02 +02:00
Linus Torvalds 5bbcc0f595 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Highlights:

   1) Maintain the TCP retransmit queue using an rbtree, with 1GB
      windows at 100Gb this really has become necessary. From Eric
      Dumazet.

   2) Multi-program support for cgroup+bpf, from Alexei Starovoitov.

   3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew
      Lunn.

   4) Add meter action support to openvswitch, from Andy Zhou.

   5) Add a data meta pointer for BPF accessible packets, from Daniel
      Borkmann.

   6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet.

   7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli.

   8) More work to move the RTNL mutex down, from Florian Westphal.

   9) Add 'bpftool' utility, to help with bpf program introspection.
      From Jakub Kicinski.

  10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper
      Dangaard Brouer.

  11) Support 'blocks' of transformations in the packet scheduler which
      can span multiple network devices, from Jiri Pirko.

  12) TC flower offload support in cxgb4, from Kumar Sanghvi.

  13) Priority based stream scheduler for SCTP, from Marcelo Ricardo
      Leitner.

  14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg.

  15) Add RED qdisc offloadability, and use it in mlxsw driver. From
      Nogah Frankel.

  16) eBPF based device controller for cgroup v2, from Roman Gushchin.

  17) Add some fundamental tracepoints for TCP, from Song Liu.

  18) Remove garbage collection from ipv6 route layer, this is a
      significant accomplishment. From Wei Wang.

  19) Add multicast route offload support to mlxsw, from Yotam Gigi"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits)
  tcp: highest_sack fix
  geneve: fix fill_info when link down
  bpf: fix lockdep splat
  net: cdc_ncm: GetNtbFormat endian fix
  openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start
  netem: remove unnecessary 64 bit modulus
  netem: use 64 bit divide by rate
  tcp: Namespace-ify sysctl_tcp_default_congestion_control
  net: Protect iterations over net::fib_notifier_ops in fib_seq_sum()
  ipv6: set all.accept_dad to 0 by default
  uapi: fix linux/tls.h userspace compilation error
  usbnet: ipheth: prevent TX queue timeouts when device not ready
  vhost_net: conditionally enable tx polling
  uapi: fix linux/rxrpc.h userspace compilation errors
  net: stmmac: fix LPI transitioning for dwmac4
  atm: horizon: Fix irq release error
  net-sysfs: trigger netlink notification on ifalias change via sysfs
  openvswitch: Using kfree_rcu() to simplify the code
  openvswitch: Make local function ovs_nsh_key_attr_size() static
  openvswitch: Fix return value check in ovs_meter_cmd_features()
  ...
2017-11-15 11:56:19 -08:00
Linus Torvalds 6aa2f9441f This is the bulk of GPIO changes for the v4.15 kernel cycle:
CORE:
 - Fix the semantics of raw GPIO to actually be raw. No
   inversion semantics as before, but also no open draining,
   and allow the raw operations to affect lines used for
   interrupts as the caller supposedly knows what they are
   doing if they are getting the big hammer.
 
 - Rewrote the __inner_function() notation calls to names that
   make more sense. I just find this kind of code disturbing.
 
 - Drop the .irq_base() field from the gpiochip since now all
   IRQs are mapped dynamically. This is nice.
 
 - Support for .get_multiple() in the core driver API. This
   allows us to read several GPIO lines with a single
   register read. This has high value for some usecases: it
   can be used to create oscilloscopes and signal analyzers
   and other things that rely on reading several lines at
   exactly the same instant. Also a generally nice
   optimization. This uses the new assign_bit() macro from
   the bitops lib that was ACKed by Andrew Morton and
   is implemented for two drivers, one of them being the
   generic MMIO driver so everyone using that will be able
   to benefit from this.
 
 - Do not allow requests of Open Drain and Open Source
   setting of a GPIO line simultaneously. If the hardware
   actually supports enabling both at the same time the
   electrical result would be disastrous.
 
 - A new interrupt chip core helper. This will be helpful
   to deal with "banked" GPIOs, which means GPIO controllers
   with several logical blocks of GPIO inside them. This
   is several gpiochips per device in the device model, in
   contrast to the case when there is a 1-to-1 relationship
   between a device and a gpiochip.
 
 NEW DRIVERS:
 
 - Maxim MAX3191x industrial serializer, a very interesting
   piece of professional I/O hardware.
 
 - Uniphier GPIO driver. This is the GPIO block from the
   recent Socionext (ex Fujitsu and Panasonic) platform.
 
 - Tegra 186 driver. This is based on the new banked GPIO
   infrastructure.
 
 OTHER IMPROVEMENTS:
 
 - Some documentation improvements.
 
 - Wakeup support for the DesignWare DWAPB GPIO controller.
 
 - Reset line support on the DesignWare DWAPB GPIO controller.
 
 - Several non-critical bug fixes and improvements for the
   Broadcom BRCMSTB driver.
 
 - Misc non-critical bug fixes like exotic errorpaths, removal
   of dead code etc.
 
 - Explicit comments on fall-through switch() statements.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJaCvGiAAoJEEEQszewGV1z+oAQAJUpdPH/msdgHDuXSuBcbuFq
 NObQdkRiz1hez4vJOT+kbgES6ay57MArnbmM/xRdy+37lKrmkP+yfZe4UUruQhhW
 f2GVlwBbUp9tIzNliS8IYWO0tj+BTYyg1MQx0C0nE1zMZqVZk44EDa9SO6esRaFJ
 SLc2BpO3oJCQRaObe0+KTHIJV0dK3vQh4QXSzL+cM5u7P67Jq+wv4xdLVVScwbJB
 4jgwVER3Ah0E1jHclIG2PxI1rbYKwlOBumafOTUlq5fmfC3tULVPJEm9FXcdaBLJ
 KAmtxX4yi+SgUccYFsmK+fNNLVQiAjmkhJCl6kxVOrxYqamrG100YST4Iew3sakM
 /iQ3lpup5L6eJ/dndfgE207OqRFhvAzNRxORv1p/wJIRLmV1/QehCX8GYOcDumXY
 MySRcEeUeZPfBHcnjIDRP6y/XOg8zBKso7GL+feRgLZUJZlNQZqokdC95TY9S5nm
 QLK+sU367o41tomyv5TP3y1DDsym6+ZdpuOUh73znxuz2x/x+FfTfwM2J0r8Ussm
 GQTfAojeBI9aSOZ2mvgRI1XxSprXqO3FFFWBwrQ6RS9rBceLF1o2ySKC2gI0FG5d
 6GBkARcN5RyyNtYkH923pyrqz/FZJc6ZkrsUTGmERM5HGuWwczcditqwYRhbHwl8
 pIlmX4y0AYh6FFVoIcQE
 =8Mon
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.15 kernel cycle:

  Core:

   - Fix the semantics of raw GPIO to actually be raw. No inversion
     semantics as before, but also no open draining, and allow the raw
     operations to affect lines used for interrupts as the caller
     supposedly knows what they are doing if they are getting the big
     hammer.

   - Rewrote the __inner_function() notation calls to names that make
     more sense. I just find this kind of code disturbing.

   - Drop the .irq_base() field from the gpiochip since now all IRQs are
     mapped dynamically. This is nice.

   - Support for .get_multiple() in the core driver API. This allows us
     to read several GPIO lines with a single register read. This has
     high value for some usecases: it can be used to create
     oscilloscopes and signal analyzers and other things that rely on
     reading several lines at exactly the same instant. Also a generally
     nice optimization. This uses the new assign_bit() macro from the
     bitops lib that was ACKed by Andrew Morton and is implemented for
     two drivers, one of them being the generic MMIO driver so everyone
     using that will be able to benefit from this.

   - Do not allow requests of Open Drain and Open Source setting of a
     GPIO line simultaneously. If the hardware actually supports
     enabling both at the same time the electrical result would be
     disastrous.

   - A new interrupt chip core helper. This will be helpful to deal with
     "banked" GPIOs, which means GPIO controllers with several logical
     blocks of GPIO inside them. This is several gpiochips per device in
     the device model, in contrast to the case when there is a 1-to-1
     relationship between a device and a gpiochip.

  New drivers:

   - Maxim MAX3191x industrial serializer, a very interesting piece of
     professional I/O hardware.

   - Uniphier GPIO driver. This is the GPIO block from the recent
     Socionext (ex Fujitsu and Panasonic) platform.

   - Tegra 186 driver. This is based on the new banked GPIO
     infrastructure.

  Other improvements:

   - Some documentation improvements.

   - Wakeup support for the DesignWare DWAPB GPIO controller.

   - Reset line support on the DesignWare DWAPB GPIO controller.

   - Several non-critical bug fixes and improvements for the Broadcom
     BRCMSTB driver.

   - Misc non-critical bug fixes like exotic errorpaths, removal of dead
     code etc.

   - Explicit comments on fall-through switch() statements"

* tag 'gpio-v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (65 commits)
  gpio: tegra186: Remove tegra186_gpio_lock_class
  gpio: rcar: Add r8a77995 (R-Car D3) support
  pinctrl: bcm2835: Fix some merge fallout
  gpio: Fix undefined lock_dep_class
  gpio: Automatically add lockdep keys
  gpio: Introduce struct gpio_irq_chip.first
  gpio: Disambiguate struct gpio_irq_chip.nested
  gpio: Add Tegra186 support
  gpio: Export gpiochip_irq_{map,unmap}()
  gpio: Implement tighter IRQ chip integration
  gpio: Move lock_key into struct gpio_irq_chip
  gpio: Move irq_valid_mask into struct gpio_irq_chip
  gpio: Move irq_nested into struct gpio_irq_chip
  gpio: Move irq_chained_parent to struct gpio_irq_chip
  gpio: Move irq_default_type to struct gpio_irq_chip
  gpio: Move irq_handler to struct gpio_irq_chip
  gpio: Move irqdomain into struct gpio_irq_chip
  gpio: Move irqchip into struct gpio_irq_chip
  gpio: Introduce struct gpio_irq_chip
  pinctrl: armada-37xx: remove unused variable
  ...
2017-11-14 17:23:44 -08:00
Thierry Reding f0fbe7bce7 gpio: Move irqdomain into struct gpio_irq_chip
In order to consolidate the multiple ways to associate an IRQ chip with
a GPIO chip, move more fields into the new struct gpio_irq_chip.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-08 14:06:21 +01:00
David S. Miller 6e300769dc wireless-drivers-next patches for 4.15
Mostly fixes this time, but also few new features.
 
 Major changes:
 
 wil6210
 
 * remove ssid debugfs file
 
 rsi
 
 * add WOWLAN support for suspend, hibernate and shutdown states
 
 ath10k
 
 * add support for CCMP-256, GCMP and GCMP-256 ciphers on hardware
   where it's supported (QCA99x0 and QCA4019)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJZ/HSCAAoJEG4XJFUm622b2sQH+wXgE1swS9xp1AfV3hcVLGoJ
 YjLjR3/BAxsIqkYwhswarTDrD3jsOKrL4ywRk+0BAdR7f2BeOYhQXtZqgjvE8cbu
 WWv5LmSwuKM6tF3ujgjQ6yZvgyDHl2d7lZL59EWG05K/yjJuU8ByoUhLKM5IiqPh
 SWXj3ZtydgGZm2eZTPyan+MFz91jw/X23Jm/AaIAxayf+1J4n1lNpc4rRhUxh/oy
 kGLQ2vsVnegSiHJWTboDFPeRha+daBsbf1MQc0Bh7MzDoWcaqSNX5VgrbaRqp35u
 sb9pmPZS4FzvAdU3bJ9AIPa9ujjblEvDp1JIhrfBUqiuTdvXDZ7XtW8kVsJk1RY=
 =MvWY
 -----END PGP SIGNATURE-----

Merge tag 'wireless-drivers-next-for-davem-2017-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for 4.15

Mostly fixes this time, but also few new features.

Major changes:

wil6210

* remove ssid debugfs file

rsi

* add WOWLAN support for suspend, hibernate and shutdown states

ath10k

* add support for CCMP-256, GCMP and GCMP-256 ciphers on hardware
  where it's supported (QCA99x0 and QCA4019)
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-04 18:07:50 +09:00
David S. Miller 2a171788ba Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Files removed in 'net-next' had their license header updated
in 'net'.  We take the remove from 'net-next'.

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-04 09:26:51 +09:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Joe Perches 758f7e0606 bcma: Use bcma_debug and not pr_cont in MIPS driver
Commit 66cc044249 ("bcma: use bcma_debug and pr_cont in MIPS driver")
converted a printk(KERN_DEBUG to bcma_debug.

bcma_debug is guarded by a #define DEBUG via pr_debug.

This means that the bcma_debug will generally not be emitted
but any pr_cont following the bcma_debug will be emitted.

Correct this by removing the uses of pr_cont by using a temporary.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-27 11:01:37 +03:00
Rafał Miłecki 66cc044249 bcma: use bcma_debug and pr_cont in MIPS driver
Using bcma_debug gives a device-specific prefix for messages and pr_cont
is a common helper for continuing a line.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-By: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-17 17:22:07 +03:00
Randy Dunlap 0f0a0af826 bcma: keep *config menu together
Use "if BCMA"/"endif" around all Kconfig symbols so that they are
kept together in *config menus instead of showing up in unexpected
places. Also remove "depends on BCMA" since this is handled by the
"if BCMA" addition.

Tested with ARCH={x86_64,MIPS} using make {n,menu,g,x}config.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-10-13 12:37:21 +03:00
Vincent Legoll 9ca766b364 bcma: make BCMA a menuconfig to ease disabling it all
No need to get into the submenu to disable all BCMA-related config entries.

Signed-off-by: Vincent Legoll <vincent.legoll@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08 14:44:40 +03:00
Florian Fainelli 459c35148e bcma: gpio: Correct number of GPIOs for BCM53573
Broadcom BCM53573 SoCs actually have 32 GPIOs, and not 16.

Fixes: 3f37ec79dd ("bcma: support BCM53573 series of wireless SoCs")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-27 13:59:07 +03:00
Rafał Miłecki f825f6ed20 bcma: fill core OF info independently of bus type
PCI devices can be described in DT as well so we should always execute
relevant code. This will make bcma e.g. set of_node for cores described
in DT.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-03-20 19:12:01 +02:00
Rafał Miłecki 5e48a4cd2e bcma: use helper function to set core dev's parent
A tiny code deduplication thanks to the bcma_bus_get_host_dev.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-03-20 19:12:00 +02:00
Rafał Miłecki 48d1977655 bcma: drop unneeded check for CONFIG_OF_IRQ
We already have the same check in bcma_of_get_irq which really calls
symbols available with CONFIG_OF_IRQ only. It appears this duplicated
check was accidentally added in commit c58d900cc9 ("bcma: fix building
without OF_IRQ"). The rest of code in bcma_of_fill_device should work
fine without CONFIG_OF_IRQ.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-03-20 19:11:11 +02:00
Rafał Miłecki a4bb5b1b47 bcma: gpio: set of_node regardless of the host type
DT allows describing many device types, not only platform ones. If e.g.
bcma is hosted on PCI(e) and it has its of_node, let's pass it to the
GPIO subsystem. This allows GPIO code to handle more hardware details
not only for bcma on a SoC.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-03-08 17:04:24 +02:00
David S. Miller e2160156bf Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
All merge conflicts were simple overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02 16:54:00 -05:00
Rafał Miłecki b1a4c9a196 bcma: make OF code more generic (not platform_device specific)
OF allows not only specifying platform devices but also describing
devices on standard buses like PCI or USB. This change will allow
reading info from DT for bcma buses hosted on PCI cards.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-31 09:28:34 +02:00
Rafał Miłecki a971df0b9d bcma: use (get|put)_device when probing/removing device driver
This allows tracking device state and e.g. makes devm work as expected.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-31 09:27:09 +02:00
Rafał Miłecki 7195439d1d Revert "bcma: init serial console directly from ChipCommon code"
This reverts commit 4c81acab38 ("bcma: init serial console directly
from ChipCommon code") as it broke IRQ assignment. Getting IRQ with
bcma_core_irq helper on SoC requires MIPS core to be set. It happens
*after* ChipCommon initialization so we can't do this so early.

This fixes a user reported regression. It wasn't critical as serial was
still somehow working but lack of IRQs was making in unreliable.

Fixes: 4c81acab38 ("bcma: init serial console directly from ChipCommon code")
Reported-by: Felix Fietkau <nbd@nbd.name>
Cc: stable@vger.kernel.org # 4.6+
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-17 14:23:44 +02:00
Jiri Slaby 59391a96dc bcma: add Dell Inspiron 3148
This is what is in the laptop:
01:00.0 Network controller [0280]: Broadcom Limited BCM43142 802.11b/g/n [14e4:4365] (rev 01)
        Subsystem: Dell Device [1028:0018]
        Flags: bus master, fast devsel, latency 0, IRQ 18
        Memory at b0400000 (64-bit, non-prefetchable) [size=32K]
        Capabilities: [40] Power Management version 3
        Capabilities: [58] Vendor Specific Information: Len=78 <?>
        Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
        Capabilities: [d0] Express Endpoint, MSI 00
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [13c] Virtual Channel
        Capabilities: [160] Device Serial Number 00-00-9a-ff-ff-f3-40-b8
        Capabilities: [16c] Power Budgeting <?>

With the patch, I can see:
bcma: bus0: Found chip with id 43142, rev 0x01 and package 0x08
bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x28, class 0x0)
bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x21, class 0x0)
bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x16, class 0x0)
bcma: bus0: Core 3 found: UNKNOWN (manuf 0x43B, id 0x368, rev 0x00, class 0x0)
bcma: bus0: Bus registered

The wifi is not currently supported by brcmsmac yet:
brcmsmac bcma1:1: mfg 4bf core 812 rev 33 class 0 irq 18
brcmsmac: unknown device id 4365

So don't expect a working wifi from this patch :).

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: <linux-wireless@vger.kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-29 17:35:14 +02:00
Arnd Bergmann defb893fff bcma: use of_dma_configure() to set initial dma mask
While fixing another bug, I noticed that bcma manually sets up
a dma_mask pointer for its child devices. We have a generic
helper for that now, which should be able to cope better with
any variations that might be needed to deal with cache coherency,
unusual DMA address offsets, iommus, or limited DMA masks, none
of which are currently handled here.

This changes the core to use the of_dma_configure(), like
we do for platform devices that are probed directly from
DT.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-09 12:00:37 +03:00
Rafał Miłecki 3f37ec79dd bcma: support BCM53573 series of wireless SoCs
BCM53573 seems to be the first series of Northstar family with wireless
on the chip. The base models are BCM53573-s (A0, A1) and there is also
BCM47189B0 which seems to be some small modification.

The only problem with these chipsets seems to be watchdog. It's totally
unavailable on 53573A0 / 53573A1 and preferable PMU watchdog is broken
on 53573B0 / 53573B1.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03 12:58:42 +03:00
David S. Miller d5b160d342 wireless-drivers-next patches for 4.8
Major changes:
 
 wl18xx
 
 * add initial mesh support
 
 bcma
 
 * serial flash support on non-MIPS SoCs
 
 ath10k
 
 * enable support for QCA9888
 * disable wake_tx_queue() mac80211 op for older devices to workaround
   throughput regression
 
 ath9k
 
 * implement temperature compensation support for AR9003+
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJXkilmAAoJEG4XJFUm622bWa0H/140nogmko+U1QXTSzVcNeJM
 dNPwYvkrDu5PPjWL0PekUXT8WVPk6P/SD7Sa93822BQFyR1i5QEWnXX7NMMw8WwW
 f7uhCdACHoVwIktVj+CTWmat9viknyed2/B9Qbi07tfuhDMKdfi76wHf4frPW5yP
 wygslKYgyV2Af/18puEcfLeBHDYI61AA1NEO69uPIx5WdT/71YrlwssnH8/xtSlV
 YElYyApxv7GUVx6Irj6d/YyilvElDbzQlZSLW5zfO2664LW63MGpCY5cnP7K5Nfo
 pGNVj1f3FpYK8ZncHAlNUH8bJj9snNn7RFYSo//6QAoWv7t4M2T7AbdYhNHK/ko=
 =a9OQ
 -----END PGP SIGNATURE-----

Merge tag 'wireless-drivers-next-for-davem-2016-07-22' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
pull-request: wireless-drivers-next 2016-07-22

I'm sick so I have to keep this short, but here's the last pull request
to net-next. This time there's a trivial conflict with mtd tree:

http://lkml.kernel.org/g/20160720123133.44dab209@canb.auug.org.au

We concluded with Brian (CCed) that it's best that we ask Linus to fix
this. The patches have been in linux-next for a couple of days. This
time I haven't done any merge tests so I don't know if there are any
other conflicts etc.

Please let me know if there are any problems.

wireless-drivers-next patches for 4.8

Major changes:

wl18xx

* add initial mesh support

bcma

* serial flash support on non-MIPS SoCs

ath10k

* enable support for QCA9888
* disable wake_tx_queue() mac80211 op for older devices to workaround
  throughput regression

ath9k

* implement temperature compensation support for AR9003+
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-25 11:09:19 -07:00
Rafał Miłecki cc2d1de06f bcma: define ChipCommon B MII registers
We don't have access to datasheets to document all the bits but we can
name these registers at least.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-07-19 21:13:10 +03:00
Rafał Miłecki 57d8f7dd21 bcma: allow enabling serial flash support on non-MIPS SoCs
So far we had only MIPS devices with serial flash connected to the SoC's
ChipCommon. ARM devices got a separated SPI controller and weere using
standard SPI drivers.
This has changed with the wireless SoC BCM47189B0. It's ARM based but
has serial flash attached just like older devices. This allows using
existing driver with these devices.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-07-18 22:43:35 +03:00
Rafał Miłecki 1bea0512c3 bcma: add PCI ID for Foxconn's BCM43142 device
After discovering there are 2 very different 14e4:4365 PCI devices we
made ID tables less generic. Back then we believed there are only 2 such
devices:
1) 14e4:4365 1028:0016 with SoftMAC BCM43142 chipset
2) 14e4:4365 14e4:4365 with FullMAC BCM4366 chipset

>From the recent report it appears there is also 14e4:4365 105b:e092
which should be claimed by bcma. Add back support for it.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=121881
Fixes: 515b399c9a ("bcma: claim only 14e4:4365 PCI Dell card with SoftMAC BCM43142")
Reported-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: Stable <stable@vger.kernel.org> [4.6+]
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-07-18 22:38:24 +03:00
Lukas Wunner abb2bafd29 x86/quirks: Add early quirk to reset Apple AirPort card
The EFI firmware on Macs contains a full-fledged network stack for
downloading OS X images from osrecovery.apple.com. Unfortunately
on Macs introduced 2011 and 2012, EFI brings up the Broadcom 4331
wireless card on every boot and leaves it enabled even after
ExitBootServices has been called. The card continues to assert its IRQ
line, causing spurious interrupts if the IRQ is shared. It also corrupts
memory by DMAing received packets, allowing for remote code execution
over the air. This only stops when a driver is loaded for the wireless
card, which may be never if the driver is not installed or blacklisted.

The issue seems to be constrained to the Broadcom 4331. Chris Milsted
has verified that the newer Broadcom 4360 built into the MacBookPro11,3
(2013/2014) does not exhibit this behaviour. The chances that Apple will
ever supply a firmware fix for the older machines appear to be zero.

The solution is to reset the card on boot by writing to a reset bit in
its mmio space. This must be done as an early quirk and not as a plain
vanilla PCI quirk to successfully combat memory corruption by DMAed
packets: Matthew Garrett found out in 2012 that the packets are written
to EfiBootServicesData memory (http://mjg59.dreamwidth.org/11235.html).
This type of memory is made available to the page allocator by
efi_free_boot_services(). Plain vanilla PCI quirks run much later, in
subsys initcall level. In-between a time window would be open for memory
corruption. Random crashes occurring in this time window and attributed
to DMAed packets have indeed been observed in the wild by Chris
Bainbridge.

When Matthew Garrett analyzed the memory corruption issue in 2012, he
sought to fix it with a grub quirk which transitions the card to D3hot:
http://git.savannah.gnu.org/cgit/grub.git/commit/?id=9d34bb85da56

This approach does not help users with other bootloaders and while it
may prevent DMAed packets, it does not cure the spurious interrupts
emanating from the card. Unfortunately the card's mmio space is
inaccessible in D3hot, so to reset it, we have to undo the effect of
Matthew's grub patch and transition the card back to D0.

Note that the quirk takes a few shortcuts to reduce the amount of code:
The size of BAR 0 and the location of the PM capability is identical
on all affected machines and therefore hardcoded. Only the address of
BAR 0 differs between models. Also, it is assumed that the BCMA core
currently mapped is the 802.11 core. The EFI driver seems to always take
care of this.

Michael Büsch, Bjorn Helgaas and Matt Fleming contributed feedback
towards finding the best solution to this problem.

The following should be a comprehensive list of affected models:
    iMac13,1        2012  21.5"       [Root Port 00:1c.3 = 8086:1e16]
    iMac13,2        2012  27"         [Root Port 00:1c.3 = 8086:1e16]
    Macmini5,1      2011  i5 2.3 GHz  [Root Port 00:1c.1 = 8086:1c12]
    Macmini5,2      2011  i5 2.5 GHz  [Root Port 00:1c.1 = 8086:1c12]
    Macmini5,3      2011  i7 2.0 GHz  [Root Port 00:1c.1 = 8086:1c12]
    Macmini6,1      2012  i5 2.5 GHz  [Root Port 00:1c.1 = 8086:1e12]
    Macmini6,2      2012  i7 2.3 GHz  [Root Port 00:1c.1 = 8086:1e12]
    MacBookPro8,1   2011  13"         [Root Port 00:1c.1 = 8086:1c12]
    MacBookPro8,2   2011  15"         [Root Port 00:1c.1 = 8086:1c12]
    MacBookPro8,3   2011  17"         [Root Port 00:1c.1 = 8086:1c12]
    MacBookPro9,1   2012  15"         [Root Port 00:1c.1 = 8086:1e12]
    MacBookPro9,2   2012  13"         [Root Port 00:1c.1 = 8086:1e12]
    MacBookPro10,1  2012  15"         [Root Port 00:1c.1 = 8086:1e12]
    MacBookPro10,2  2012  13"         [Root Port 00:1c.1 = 8086:1e12]

For posterity, spurious interrupts caused by the Broadcom 4331 wireless
card resulted in splats like this (stacktrace omitted):

    irq 17: nobody cared (try booting with the "irqpoll" option)
    handlers:
    [<ffffffff81374370>] pcie_isr
    [<ffffffffc0704550>] sdhci_irq [sdhci] threaded [<ffffffffc07013c0>] sdhci_thread_irq [sdhci]
    [<ffffffffc0a0b960>] azx_interrupt [snd_hda_codec]
    Disabling IRQ #17

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=79301
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111781
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=728916
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=895951#c16
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1009819
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1098621
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1149632#c5
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1279130
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1332732
Tested-by: Konstantin Simanov <k.simanov@stlk.ru>        # [MacBookPro8,1]
Tested-by: Lukas Wunner <lukas@wunner.de>                # [MacBookPro9,1]
Tested-by: Bryan Paradis <bryan.paradis@gmail.com>       # [MacBookPro9,2]
Tested-by: Andrew Worsley <amworsley@gmail.com>          # [MacBookPro10,1]
Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com> # [MacBookPro10,2]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Chris Milsted <cmilsted@redhat.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Michael Buesch <m@bues.ch>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: b43-dev@lists.infradead.org
Cc: linux-pci@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Cc: stable@vger.kernel.org
Cc: stable@vger.kernel.org # 123456789abc: x86/quirks: Apply nvidia_bugs quirk only on root bus
Cc: stable@vger.kernel.org # 123456789abc: x86/quirks: Reintroduce scanning of secondary buses
Link: http://lkml.kernel.org/r/48d0972ac82a53d460e5fce77a07b2560db95203.1465690253.git.lukas@wunner.de
[ Did minor readability edits. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-10 20:13:53 +02:00