With the goal of moving the core of the greybus code out of staging, the
include files need to be moved to include/linux/greybus.h and
include/linux/greybus/
Cc: Vaibhav Hiremath <hvaibhav.linux@gmail.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Cc: Rui Miguel Silva <rmfrfs@gmail.com>
Cc: David Lin <dtwlin@gmail.com>
Cc: "Bryan O'Donoghue" <pure.logic@nexus-software.ie>
Cc: greybus-dev@lists.linaro.org
Cc: devel@driverdev.osuosl.org
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Alex Elder <elder@kernel.org>
Link: https://lore.kernel.org/r/20190825055429.18547-8-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the gpiod interface instead of the deprecated old non-descriptor
interface while continuing to ignore gpio flags from device tree in
"svc_reset_onoff()" for now.
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the manual validity checks for the GPIO with the
gpio_is_valid().
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We should get drvdata from struct device directly. Going via
platform_device is an unneeded step back and forth.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix "alignment should match open parenthesis" checkpatch.pl error.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the SPDX tag is in all greybus files, that identifies the
license in a specific and legally-defined manner. So the extra GPL text
wording can be removed as it is no longer needed at all.
This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text. And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.
No copyright headers or other non-license-description text was removed.
Cc: Vaibhav Hiremath <hvaibhav.linux@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Acked-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Acked-by: David Lin <dtwlin@gmail.com>
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Acked-by: "Bryan O'Donoghue" <pure.logic@nexus-software.ie>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.
Update the drivers/staging/greybus files files with the correct SPDX
license identifier based on the license text in the file itself. The
SPDX identifier is a legally binding shorthand, which can be used
instead of the full boiler plate text.
This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.
Cc: Vaibhav Hiremath <hvaibhav.linux@gmail.com>
Cc: "Bryan O'Donoghue" <pure.logic@nexus-software.ie>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Acked-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Acked-by: David Lin <dtwlin@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unnecessary platform_set_drvdata() has been removed since the driver
core clears the driver data to NULL after device release or on
probe failure. There is no need to manually clear the device
driver data to NULL.
The Coccinelle semantic patch used to make this change is as follows:
//<smpl>
@@
struct platform_device *pdev;
@@
- platform_set_drvdata(pdev, NULL);
//</smpl>
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adjust formatting of several comments to keep line length within
the 80 column limit preferred by the Linux kernel coding style.
Signed-off-by: Mitchell Tasman <tasman@leaflabs.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enabling the arche platform for compile testing showed a harmless
warning with CONFIG_PM=n:
drivers/staging/greybus/arche-platform.c:632:12: error: 'arche_platform_resume' defined but not used [-Werror=unused-function]
drivers/staging/greybus/arche-platform.c:618:12: error: 'arche_platform_suspend' defined but not used [-Werror=unused-function]
This marks the functions as __maybe_unused to shut up the warnings.
Fixes: 2eccd4aa19 ("staging: greybus: enable compile testing of arche driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add Arche platform-driver config option and allow the driver to be
compile tested also without the out-of-tree usb3613 driver.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the remaining timesync bits that were left in the arche platform
driver and which prevented the driver from being compiled.
Fixes: bdfb95c4ba ("staging: greybus: remove timesync protocol support")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes only obvious lines.
There are still more issues.
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure to drop the device reference taken by of_find_device_by_node()
before returning from arche_platform_change_state().
Note that this code is expected to be removed, but let's fix up the leak
nonetheless.
Fixes: 886aba558b ("greybus: arche-platform: Export fn to allow...")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Vaibhav Hiremath <hvaibhav.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This resolves a merge issue with
drivers/staging/iio/accel/sca3000_core.c and we want the fixes all in
here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This node pointer is returned by of_find_compatible_node() with
refcount incremented in this function. of_node_put() on it before
exitting this function.
This is detected by Coccinelle semantic patch.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch warning:
WARNING: Block comments use a trailing */ on a separate line
Signed-off-by: Elise Lennion <elise.lennion@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Declare the arrays 'arche_platform_of_match' and 'arche_combined_id' as const.
'arche_platform_of_match' is only stored in the .of_match_table field of a
device_driver structure, which is declared as const.
'arche_combined_id' is passed to MODULE_DEVICE_TABLE. This macro does not
modify the array and therefore the array can be declared as const. Checkpatch
pointed out both issues.
WARNING: struct of_device_id should be normally const
Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Modify return statement to use the value being returned directly instead of
assigning it first to 'ret' and returning this variable. Coccinelle semantic
patch used:
@@
expression e;
local idexpression ret;
@@
-ret =
+return
e;
-return ret;
Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case of Mihi, SPI bus is shared between APB1 and APB2
SPI ROMs, so their FW flashing must be sequential and
arche-platform driver should make sure that they are mutual
exclusive in nature.
So this patch adds certain restrictions to the user of the
arche-platform driver,
- User can no longer flash APB1 and APB2 SPI ROM in parallel
- SPI bus becomes an resource, so user must claim it by moving
respective APB device into FW_FLASHING mode and release it
by exiting FW_FLASHING mode. User can exit FW_FLASHING mode by
switching to any other modes (ACTIVE, OFF, STANDBY).
- If APB1 is in FW_FLASHING mode, APB2 can no longer enter into
FW_FLASHING mode. User will get -EBUSY.
Having said that, while APB1 is into FW_FLASHING mode,
APB2 can independently boot from its own SPI ROM.
Testing Done: Tested by simulating usecase on EVT2.
- Made sure that APB1 and APB2 FW_FLASHING mode is mutual exclusive
in nature. Confirmed that an attempt on second device return -EBUSY.
- Added simulating code, where printed state of dummy gpio for
spi-en and verified that it shows right pin status for both APBs
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
There is possible race condition in arche platform driver for
maintaining of ->state field, when shared with timesync driver.
Assume device booted fine, all connected modules have been enumerated
correctly. As part of suspend-resume operation we have pm_notifier
callback, where we turn off SVC & APB and coldboot on resume.
In the process of resume, all modules gets enumerated again, and
timesync driver does come into picture everytime.
So when timesync driver requests arche-platform to change the state
to TIMESYNC and in the middle of sync operation, if suspend gets
triggered, then execution lands into arche-platform->pm_notifier callback,
leading to race condition in the driver, where it checks for (state != ACTIVE)
in PM_SUSPEND_PREPARE and returns, but in PM_POST_SUSPEND it just simply
coldboots SVC & APB, which would inbalance all resources (including IRQ).
So we need a add check in PM_POST_SUSPEND, to make sure that, we only
coldboot devices if they are in to off state,
i.e. if (state != OFF) then return.
Testing Done: Done regressive suspend/resume testing on EVT2 platform.
Note that, I some time hit issue.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Disable wake_detect interrupt after request
As part of SW-4344/SW-7061, now we are enabling FW flashing
to all builds. That means check for need of FW upgrade is
going to be present in all builds, and moving to FW_FlASHING
mode from active is heavy operation; so the idea here is
simplify this process and save the boot time due to switching
back-n-forth between ACTIVE<=>FW_FLASHING modes.
So we decided to put unipro into OFF state by default on boot,
which can be changed through DT property. If arche-platform
device node has "arche,init-off" property set, then unipro
will be in OFF state on boot. User can bring it back by
# echo active > /sys/devices/arche_platform*/state
And to simply the exit code of probe() fn the
arche_platform_coldboot_seq() has been shifted to the
bottom of the _probe() fn.
Testing Done: Tested on EVT2 platform, with and without
"arche,init-off" property, multiple times.
Note: I am seeing SW-7128, which is not related to these changes.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Tested-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Implement platform driver shutdown callback to perform proper greybus
shutdown so that the userspace unipro_shutdown service that shuts down
the APB/SVC abruptly can be removed. The shutdown callback in
arche-platform will first remove SVC so that all the Interface can be
Deactivated in a sequence according to the spec before powering off the
APB:
Before:
-> Arche/APB power off
-> SoC power off
After this patch:
-> HD shutdown
-> SVC shutdown
-> Module shutdown
-> Interface shutdown
-> Bundle shutdown
-> Arche/APB power off
-> SoC power off
Testing Done:
- Observe all Interfaces are deactivated in the log during shutdown
- Measure power off current and make sure no regression
Signed-off-by: David Lin <dtwlin@google.com>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This patch adds the core timesync functionality.
0. arche-platform.c/arche-apb-ctrl.c
Modifies the platform layer to hook the incoming TIME_SYNC signal up to
the timesync strobe IRQ handler. If the arche-platform driver can't
satisfy the request for the wake-detect line, it will return -EAGAIN and
the calling work-queue must reschedule the attempt to get exclusive
access to the wake-detect pin logic. A private data field is added to
the arche-platform driver to enable passing of a timesync pointer to the
ISR responsible for synchronizing time.
1. timesync.c
A new file added which contains all of the logic associated with sending
greybus commands to SVC, APBx or Interfaces to enable, disable and
disseminate timing information.
2. timesync_platform.c
Any platform/arch specific code goes into timesync_platform.c.
Originally the idea was to keep the x86 and ARM arch dependencies in a
timesync_platform_arch.c file - however with further refinement that's
currently not necessary however just-in-case it becomes necessary to
resuscitate arch or platform specific methods for accessing timer
resources that access shouldn't be part of the core timesync.c logic and
so for the moment we access these timer resources through a thin access
layer in timesync_platform.c. Expect this to go away long term ideally.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The issue is, as part of kernel-only build we started seeing
failures in SVC FW flashing. It was reproducible easily in kernel-only
build, but never observed on Android build.
During debugging, there were couple of observations,
1. If SVC clock enabled and disables (which is REFCLK_MAIN), then SVC FW
flashing works.
2. If we do not switch SVC to HSE (external clock source) it works.
Recently, SVC code has been updated to switch HSE clock, so removing
it (remove/skip rcc_switch_ara_pll() fn) would use internal clock only.
As per STM32 spec, for flashing through USART we do not need
to enable HSE, but the above observation contradicts with it.
There is still something missing in terms of understanding of how STM32
device functions as far as Flashing is concerned. There is something
hidden in HW, which probably still need to identify.
So as a interim solution we will enable clock for FW_FLASHING state,
which seems to be fixing the issue here.
Testing Done: Tested on EVT1.5 with arche6.0 and kernel-only build.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Tested-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Make sure that, transition to active state happens only from OFF state.
Instead of imposing the restriction to user-space, driver internally
switches to OFF state and then to ACTIVE state.
Testing Done: Tested on EVT1.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Tested-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Make arche_platform_fw_flashing_seq() return error value, needed
later when we add clock enable support for FW flashing.
Testing Done: Tested on EVT1.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Tested-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Tip-of-tree is exhibiting a backtrace when loading-up the set of greybus
kernel modules due to calling arche_platform_wd_irq_en() directly after a
call to devm_request_threaded_irq().
At the point we call arch_platform_wd_irq_en() the relevant IRQ will
already be enabled. What we want to do in this situation is configure the
GPIO line as an input. This patch fixes the backtrace by supplanting
arche_platform_wd_irq_en() with
gpio_direction_input(arche_pdata->wake_detect_gpio) in
arche_platform_probe().
WARNING: at msm-ara-3.10/kernel/irq/manage.c:457 __enable_irq+0x74/0xc0()
Unbalanced enable for IRQ 687
Modules linked in: gb_arche(O+) gb_camera(O) gb_es2(O) gb_vibrator(O)
gb_raw(O) gb_power_supply(O) gb_loopback(O) gb_light(O) gb_hid(O)
greybus(O)
CPU: 0 PID: 415 Comm: insmod Tainted: G W O 3.10.78-g2a4dec8 #65
Call trace:
[<ffffffc000206adc>] dump_backtrace+0x0/0x248
[<ffffffc000206d34>] show_stack+0x10/0x1c
[<ffffffc000c6c698>] dump_stack+0x1c/0x28
[<ffffffc00021c95c>] warn_slowpath_common+0x74/0x9c
[<ffffffc00021c9d0>] warn_slowpath_fmt+0x4c/0x58
[<ffffffc000269d7c>] __enable_irq+0x70/0xc0
[<ffffffc000269e34>] enable_irq+0x68/0x7c
[<ffffffbffc0609b4>] arche_platform_probe+0x3b4/0x4f4 [gb_arche]
[<ffffffc0005ace30>] platform_drv_probe+0x14/0x20
[<ffffffc0005ab980>] driver_probe_device+0x160/0x374
[<ffffffc0005abc40>] __driver_attach+0x60/0x90
[<ffffffc0005aa768>] bus_for_each_dev+0x74/0x94
[<ffffffc0005ab2c4>] driver_attach+0x1c/0x28
[<ffffffc0005aae74>] bus_add_driver+0x124/0x248
[<ffffffc0005ac270>] driver_register+0x94/0x110
[<ffffffc0005ad3c4>] platform_driver_register+0x58/0x64
[<ffffffbffc065020>] $x+0x20/0x58 [gb_arche]
[<ffffffc0002007dc>] do_one_initcall+0xb0/0x14c
[<ffffffc00028252c>] load_module+0x19d0/0x1b18
[<ffffffc00028278c>] SyS_init_module+0x118/0x130
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiermath@linaro.org>
Tested-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Now, since AP module does not send any signal to SVC, so it
automatically restricts the wake/detect gpio to input.
So rename assert_wakedetect() fn to arche_platform_wd_irq_en(),
as per implementation.
Testing Done: Tested on EVT1.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
With new definition of AP module boot flow (from HotPlug camp),
AP is not supposed to send any wake/detect signal to SVC, instead,
during boot SVC would straight away send wake_out pulse on wake/detect
line.
Note that, pin configuration of wake/detect line would be set to
active-high by default, so wake/detect line would always stay high,
unless SVC drives it. AP module uses wake/detect line strictly in input
mode.
Testing Done: Tested on EVT1.5 platform.
Note: We are yet to decide on PM support for APBx, so we may need to
generate/handshake with SVC over wake/detect line in the future. As of
now, follow the implementation and add stuff as and when they come.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The header calls out the license to be GPL v2, while the module declares
itself as "GPL"
Testing Done: Trivial
Signed-off-by: Sandeep Patil <sspatil@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This patch simplifies and improves the readability of the internal state
transition logic of arche platform driver state transition logic by:
1. Making a dedicated function to state-transition the platform code.
2. Condense the decision to swtich states down to a single switch
statement instead of four separate if/else clauses.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Suggested-by: Alex Elder <elder@linaro.org>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
With the addition of the timesync driver and looking at the hardware
interfaces we have, its clear we need to add a new arche-platform state.
This patch adds ARCHE_PLATFORM_STATE_TIME_SYNC to the arche-platform driver
to facilitate transition to the TIME_SYNC state if-and-only-if the
arche-platform driver is in the ACTIVE state.
This is mainly needed as wake/detect lines are shared between TIMESYNC
operation and basic control functionality of APBs. So during TIMESYNC
we want to make sure that the events on wake/detect lines are
ignored by the arche-platform APB reset logic.
This patch adds one exported function, which can be invoked from
timesync driver code, allowing, switching between
ARCHE_PLATFORM_STATE_TIME_SYNC <=> ARCHE_PLATFORM_STATE_ACTIVE states.
[ bryan.odonoghue@linaro.org: Added mutex, massaged commit text ]
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Suggested-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
With addition of exported function, required for TIMESYNC operation,
we need more locking mechanism for driver state, so to avoid confusion
rename existing spinlock variable to its appropriate name.
Testing Done: Tested on DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
We have chosen the *ugly* way of registering two platform drivers from
the module_init() of only one of them, so that we can avoid having two
separate modules for them.
But we should still be doing this in a sane way. There is no need to
expose internals of arche-ctrl to arche-platform, like PM-ops, probe,
resume, id-table, etc. Just expose an init and a exit callback.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Switch off APBs/SVC/Switch in the suspend call notifier. Note that
this is an interim solution to enable fishfooding.
Testing done:
- Passed QA sanity test on EVT1.5
- Suspend current measured at ~70mW
Signed-off-by: David Lin <dtwlin@google.com>
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
[vaibhav.hiremath@linaro.org: Updated commit description]
Tested-by: Sandeep Patil <sspatil@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Earlier during boot sequence implementation, we had seen race between
USb3613 and APB boot, and since APB boot time is ~2sec, we delayed
USb3613 configuration for 2sec after APB deassertion of reset.
This obviously won't work in the case of suspend/resume, where we would
like to put APB into OFF state and coldboot in resume.
With the latest FW changes, we do not see any race issue. I have done
regression testing (> 50 iteration of reboot + unipro link up and down)
without any issues.
So lets get rid of the 2sec delay with this patch.
Testing Done: Tested on EVT 1.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Tested-by: David Lin <dtwlin@google.com>
Reviewed-by: David Lin <dtwlin@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
GPIO number obtained from of_get_named_gpio() should be signed to allow
error handling.
Testing Done:
Built & booted on EVT1.5
Signed-off-by: David Lin <dtwlin@google.com>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
HUB3613 configuration, either disable (Standby mode) or enable (HUB mode)
is related to APB. So it makes perfect sense to put both of them
together in one function.
HUB3613 enable happens only at one place, in hub_conf_delayed_work() fn,
but disable is initiated from multiple places.
Move all calls to usb3613_hub_mode_ctrl(false) to apb_poweroff().
Testing Done: Tested on DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
On first wake/detect pulse, everything works fine, as APB would be
in poweroff state initially.
But on subsequent wake/detect pulses, where APB is already in active
state, internal function just returns doing nothing, as it finds that
device is already in active state.
So the solution would be to make sure that, whenever execution reaches
to coldboot, make sure we power cycle it. Power off first, before
powering on.
Interrupt handler takes care of ignoring < 30msec pulses, so we should
be safe here to power cycle APB.
Testing Done: Testd on DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
In poweroff() fn, we are shutting down SVC, so disable interrupt
as well.
Testing Done: Tested on DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Michael Scott <michael.scott@linaro.org>
Tested-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
With support of interrupt based mechanism, gpio is not longer set to
output mode, so gpio_set_value won't work. So use
gpio_direction_output() fn in poweroff(), while setting value on
wake/detect line.
Testing Done: Tested on DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Michael Scott <michael.scott@linaro.org>
Tested-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Since now driver supports interrupt based mechanism to read events
from SVC over wake/detect line, no need to delay wake/detect assertion.
We can assert wake/detect after SVC reset deassertion, so during boot
itself SVC will start sending wake_out pulses.
Testing Done: Tested on DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Michael Scott <michael.scott@linaro.org>
Tested-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This patch enabled interrupt support on events received over wake/detect
line. The driver follows below state machine,
Default: wake/detect line is high (WD_STATE_IDLE)
On Falling edge:
SVC initiates boot (either cold/standby).
On ES3, > 30msec = coldboot, else standby boot.
Driver moves to WD_STATE_BOOT_INIT
On rising edge (> 30msec):
SVC expects APB to coldboot
Driver wakes irq thread which kicks off APB coldboot
(WD_STATE_COLDBOOT_TRIG)
On rising edge (< 30msec):
Driver ignores it, do nothing.
After coldboot of APB, HUB configuration work is scheduled after 2 sec,
allowing enough time for APB<->SVC/Switch to linkup (in multiple
iterations)
Testing Done: Tested on DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Michael Scott <michael.scott@linaro.org>
Tested-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
If driver needs to process wake/detect events from SVC, by enabling
interrupt support on wake/detect event, it becomes easier to maintain
state of wake/detect line based on functionality.
Testing Done: Tested on DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Michael Scott <michael.scott@linaro.org>
Tested-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This is preparation of interrupt handling support, where APB coldboot
and wake/detect handling will be handled as response to wake/detect
interrupt.
Due to slower I2C write operations in HUB configuration, it is important
to separate HUB configuration, and probably delay it after APB is
cold booted.
Note that delayed work will be scheduled from interrupt handler,
in following patches.
To satisfy build (and bisect), remove apb_cold_boot() fn, which will be
added back in the patch where it gets used again.
Testing Done: Tested on DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Michael Scott <michael.scott@linaro.org>
Tested-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
If SVC coldboot fails or if of_platform_populate() fn fails,
then state of device needs to be reverted.
Importantly, if of_platform_populate() fails, then poweroff the SVC.
Testing Done: Tested on DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
If user switches from fw_flashing => off mode, then we do not need
to do same things again, for example, clk_disable and wake/detect event,
as while switching to fw_flashing, driver makes sure that device goes
to off state and then brings back in fw_flashing state.
Testing Done: Tested on DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>