Here are 5 small staging driver fixes for 5.8-rc7 to resolve some
reported problems:
- 4 comedi driver fixes for problems found with them
- a syzbot-found fix for the wlang-ng driver that resolves a
much reported problem.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXx1VPw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylQcQCfYnOF/2unrOrgN/Yp1hlRcdoolzYAn3wURSR2
RUmVlPjAUWGKYhHOokFS
=n7Vq
-----END PGP SIGNATURE-----
Merge tag 'staging-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging into master
Pull staging driver fixes from Greg KH:
"Five small staging driver fixes for 5.8-rc7 to resolve some reported
problems:
- four comedi driver fixes for problems found with them
- a syzbot-found fix for the wlang-ng driver that resolves a much
reported problem.
All of these have been in linux-next with no reported issues"
* tag 'staging-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: wlan-ng: properly check endpoint types
staging: comedi: addi_apci_1564: check INSN_CONFIG_DIGITAL_TRIG shift
staging: comedi: addi_apci_1500: check INSN_CONFIG_DIGITAL_TRIG shift
staging: comedi: addi_apci_1032: check INSN_CONFIG_DIGITAL_TRIG shift
staging: comedi: ni_6527: fix INSN_CONFIG_DIGITAL_TRIG support
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAl8VlckACgkQCF8+vY7k
4RWg9RAAhmGk/mYYAIAy6o2G8CPgcNnLrUuhXD+SyYrM25QlkinMjHXVhWiPo0F8
DKq21vXg0qlOe7kwn0vSEQ7tClAuJhK/ERnLnDFWe36lO6QF5ydllzEg9XS+xVq2
4Ur+jdkllaS8j7sjQrEdQF17HW52Sr0WB8KegoeUXfeKcGaIBmB+kfNstK2fWMa+
yuVITK/YNpr53zwwsHlMvmIndui0DJHKGGWuTknZsoQfWJtO62YW50FmkizjqXIt
+4DCRiq9Juc/MPYotP2pArwBFiqSl/uP0MeWqn4YzPXvhhhoGPTAhskBWDmZD8jT
XI9Q9Uj5x5kCtTLx4CI3mG2X2XrZ+GqFKZhVD0WKnZN2skdHRn/3qn6tHm7O/Rtr
s27MVKae5zSQs1XrCXwlEz03T5wZ1y1FCX3dlXGkQqbOQLQGbZTsE8wybPElzkLR
18e8xTA1Ss7tUYf7qcrEmMk242byXP8F43cStaWCwsbJgddBpV2jFFfxan3/j6q9
Kl6Y/ssRn6OrIy1UNpdCClRweLi0U53sFQqM/ZmyUbBXMbT/y+rL6h8Wel8EvFlR
PzisYBI/G0AWHahbdHhS9mzQFAZb9etlAboMvI31bo4Bjpbv9UVkX5dMLxabcbEr
B70EZ7nigg5EMqeBkemz0kD4W68qvQRKHK0d+TYcYSnq0VMmErI=
=/5rQ
-----END PGP SIGNATURE-----
Merge tag 'media/v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media into master
Pull media fixes from Mauro Carvalho Chehab:
"A series of fixes for the upcoming atomisp driver. They solve issues
when probing atomisp on devices with multiple cameras and get rid of
warnings when built with W=1.
The diffstat is a bit long, as this driver has several abstractions.
The patches that solved the issues with W=1 had to get rid of some
duplicated code (there used to have 2 versions of the same code, one
for ISP2401 and another one for ISP2400).
As this driver is not in 5.7, such changes won't cause regressions"
* tag 'media/v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (38 commits)
Revert "media: atomisp: keep the ISP powered on when setting it"
media: atomisp: fix mask and shift operation on ISPSSPM0
media: atomisp: move system_local consts into a C file
media: atomisp: get rid of version-specific system_local.h
media: atomisp: move global stuff into a common header
media: atomisp: remove non-used 32-bits consts at system_local
media: atomisp: get rid of some unused static vars
media: atomisp: Fix error code in ov5693_probe()
media: atomisp: Replace trace_printk by pr_info
media: atomisp: Fix __func__ style warnings
media: atomisp: fix help message for ISP2401 selection
media: atomisp: i2c: atomisp-ov2680.c: fixed a brace coding style issue.
media: atomisp: make const arrays static, makes object smaller
media: atomisp: Clean up non-existing folders from Makefile
media: atomisp: Get rid of ACPI specifics in gmin_subdev_add()
media: atomisp: Provide Gmin subdev as parameter to gmin_subdev_add()
media: atomisp: Use temporary variable for device in gmin_subdev_add()
media: atomisp: Refactor PMIC detection to a separate function
media: atomisp: Deduplicate return ret in gmin_i2c_write()
media: atomisp: Make pointer to PMIC client global
...
The `INSN_CONFIG` comedi instruction with sub-instruction code
`INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is
used as a right shift amount for other bitmask values without being
checked. Shift amounts greater than or equal to 32 will result in
undefined behavior. Add code to deal with this.
Fixes: 1e15687ea4 ("staging: comedi: addi_apci_1564: add Change-of-State interrupt subdevice and required functions")
Cc: <stable@vger.kernel.org> #3.17+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20200717145257.112660-4-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `INSN_CONFIG` comedi instruction with sub-instruction code
`INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is
used as a right shift amount for other bitmask values without being
checked. Shift amounts greater than or equal to 32 will result in
undefined behavior. Add code to deal with this, adjusting the checks
for invalid channels so that enabled channel bits that would have been
lost by shifting are also checked for validity. Only channels 0 to 15
are valid.
Fixes: a8c66b684e ("staging: comedi: addi_apci_1500: rewrite the subdevice support functions")
Cc: <stable@vger.kernel.org> #4.0+: ef75e14a6c: staging: comedi: verify array index is correct before using it
Cc: <stable@vger.kernel.org> #4.0+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20200717145257.112660-5-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `INSN_CONFIG` comedi instruction with sub-instruction code
`INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is
used as a right shift amount for other bitmask values without being
checked. Shift amounts greater than or equal to 32 will result in
undefined behavior. Add code to deal with this.
Fixes: 33cdce6293 ("staging: comedi: addi_apci_1032: conform to new INSN_CONFIG_DIGITAL_TRIG")
Cc: <stable@vger.kernel.org> #3.8+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20200717145257.112660-3-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`ni6527_intr_insn_config()` processes `INSN_CONFIG` comedi instructions
for the "interrupt" subdevice. When `data[0]` is
`INSN_CONFIG_DIGITAL_TRIG` it is configuring the digital trigger. When
`data[2]` is `COMEDI_DIGITAL_TRIG_ENABLE_EDGES` it is configuring rising
and falling edge detection for the digital trigger, using a base channel
number (or shift amount) in `data[3]`, a rising edge bitmask in
`data[4]` and falling edge bitmask in `data[5]`.
If the base channel number (shift amount) is greater than or equal to
the number of channels (24) of the digital input subdevice, there are no
changes to the rising and falling edges, so the mask of channels to be
changed can be set to 0, otherwise the mask of channels to be changed,
and the rising and falling edge bitmasks are shifted by the base channel
number before calling `ni6527_set_edge_detection()` to change the
appropriate registers. Unfortunately, the code is comparing the base
channel (shift amount) to the interrupt subdevice's number of channels
(1) instead of the digital input subdevice's number of channels (24).
Fix it by comparing to 32 because all shift amounts for an `unsigned
int` must be less than that and everything from bit 24 upwards is
ignored by `ni6527_set_edge_detection()` anyway.
Fixes: 110f9e687c ("staging: comedi: ni_6527: support INSN_CONFIG_DIGITAL_TRIG")
Cc: <stable@vger.kernel.org> # 3.17+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20200717145257.112660-2-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
changeset d0213061a501 ("media: atomisp: fix mask and shift operation on ISPSSPM0")
solved the existing issue with the IUNIT power on code.
So, the driver can now use the right code again.
This reverts commit 95d1f398c4.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently the check on bits 25:24 on ISPSSPM0 is always 0 because
the mask and shift operations are incorrect. Fix this by shifting
by MRFLD_ISPSSPM0_ISPSSS_OFFSET (24 bits right) and then masking
with RFLD_ISPSSPM0_ISPSSC_MASK (0x03) to get the appropriate 2 bits
to check.
Addresses-Coverity: ("Operands don't affect result")
Fixes: 0f441fd70b ("media: atomisp: simplify the power down/up code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Instead of declaring all those consts everywhere when the
headers are included, just place them on a single place.
This change shuts up lots of warnings when built with W=1:
In file included from drivers/staging/media/atomisp/pci/ia_css_acc_types.h:23,
from drivers/staging/media/atomisp/pci/ia_css.h:26,
from drivers/staging/media/atomisp/pci/atomisp_compat_css20.h:24,
from drivers/staging/media/atomisp/pci/atomisp_compat.h:22,
from drivers/staging/media/atomisp/pci/atomisp_drvfs.c:23:
./drivers/staging/media/atomisp//pci/system_local.h:193:26: warning: ‘STREAM2MMIO_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
193 | static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = {
| ^~~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:186:26: warning: ‘PIXELGEN_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
186 | static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = {
| ^~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:179:26: warning: ‘CSI_RX_BE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
179 | static const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:172:26: warning: ‘CSI_RX_FE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
172 | static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:165:26: warning: ‘ISYS_IRQ_BASE’ defined but not used [-Wunused-const-variable=]
165 | static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:158:26: warning: ‘IBUF_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
158 | static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:153:26: warning: ‘RX_BASE’ defined but not used [-Wunused-const-variable=]
153 | static const hrt_address RX_BASE[N_RX_ID] = {
| ^~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:138:26: warning: ‘INPUT_SYSTEM_BASE’ defined but not used [-Wunused-const-variable=]
138 | static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:130:26: warning: ‘INPUT_FORMATTER_BASE’ defined but not used [-Wunused-const-variable=]
130 | static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = {
| ^~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:125:26: warning: ‘TIMED_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
125 | static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = {
| ^~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:120:26: warning: ‘GPIO_BASE’ defined but not used [-Wunused-const-variable=]
120 | static const hrt_address GPIO_BASE[N_GPIO_ID] = {
| ^~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:116:26: warning: ‘GP_TIMER_BASE’ defined but not used [-Wunused-const-variable=]
116 | static const hrt_address GP_TIMER_BASE =
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:109:26: warning: ‘GP_DEVICE_BASE’ defined but not used [-Wunused-const-variable=]
109 | static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:96:26: warning: ‘FIFO_MONITOR_BASE’ defined but not used [-Wunused-const-variable=]
96 | static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:90:26: warning: ‘GDC_BASE’ defined but not used [-Wunused-const-variable=]
90 | static const hrt_address GDC_BASE[N_GDC_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:78:26: warning: ‘IRQ_BASE’ defined but not used [-Wunused-const-variable=]
78 | static const hrt_address IRQ_BASE[N_IRQ_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:73:26: warning: ‘ISYS2401_DMA_BASE’ defined but not used [-Wunused-const-variable=]
73 | static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:69:26: warning: ‘DMA_BASE’ defined but not used [-Wunused-const-variable=]
69 | static const hrt_address DMA_BASE[N_DMA_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:63:26: warning: ‘MMU_BASE’ defined but not used [-Wunused-const-variable=]
63 | static const hrt_address MMU_BASE[N_MMU_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:54:26: warning: ‘SP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
54 | static const hrt_address SP_DMEM_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:50:26: warning: ‘SP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
50 | static const hrt_address SP_CTRL_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:45:26: warning: ‘ISP_BAMEM_BASE’ defined but not used [-Wunused-const-variable=]
45 | static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:41:26: warning: ‘ISP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
41 | static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:37:26: warning: ‘ISP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
37 | static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
In file included from drivers/staging/media/atomisp/pci/ia_css_acc_types.h:23,
from drivers/staging/media/atomisp/pci/ia_css.h:26,
from drivers/staging/media/atomisp/pci/atomisp_file.c:27:
./drivers/staging/media/atomisp//pci/system_local.h:193:26: warning: ‘STREAM2MMIO_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
193 | static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = {
| ^~~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:186:26: warning: ‘PIXELGEN_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
186 | static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = {
| ^~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:179:26: warning: ‘CSI_RX_BE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
179 | static const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:172:26: warning: ‘CSI_RX_FE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
172 | static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:165:26: warning: ‘ISYS_IRQ_BASE’ defined but not used [-Wunused-const-variable=]
165 | static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:158:26: warning: ‘IBUF_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
158 | static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:153:26: warning: ‘RX_BASE’ defined but not used [-Wunused-const-variable=]
153 | static const hrt_address RX_BASE[N_RX_ID] = {
| ^~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:138:26: warning: ‘INPUT_SYSTEM_BASE’ defined but not used [-Wunused-const-variable=]
138 | static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:130:26: warning: ‘INPUT_FORMATTER_BASE’ defined but not used [-Wunused-const-variable=]
130 | static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = {
| ^~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:125:26: warning: ‘TIMED_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
125 | static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = {
| ^~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:120:26: warning: ‘GPIO_BASE’ defined but not used [-Wunused-const-variable=]
120 | static const hrt_address GPIO_BASE[N_GPIO_ID] = {
| ^~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:116:26: warning: ‘GP_TIMER_BASE’ defined but not used [-Wunused-const-variable=]
116 | static const hrt_address GP_TIMER_BASE =
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:109:26: warning: ‘GP_DEVICE_BASE’ defined but not used [-Wunused-const-variable=]
109 | static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:96:26: warning: ‘FIFO_MONITOR_BASE’ defined but not used [-Wunused-const-variable=]
96 | static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:90:26: warning: ‘GDC_BASE’ defined but not used [-Wunused-const-variable=]
90 | static const hrt_address GDC_BASE[N_GDC_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:78:26: warning: ‘IRQ_BASE’ defined but not used [-Wunused-const-variable=]
78 | static const hrt_address IRQ_BASE[N_IRQ_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:73:26: warning: ‘ISYS2401_DMA_BASE’ defined but not used [-Wunused-const-variable=]
73 | static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:69:26: warning: ‘DMA_BASE’ defined but not used [-Wunused-const-variable=]
69 | static const hrt_address DMA_BASE[N_DMA_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:63:26: warning: ‘MMU_BASE’ defined but not used [-Wunused-const-variable=]
63 | static const hrt_address MMU_BASE[N_MMU_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:54:26: warning: ‘SP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
54 | static const hrt_address SP_DMEM_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:50:26: warning: ‘SP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
50 | static const hrt_address SP_CTRL_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:45:26: warning: ‘ISP_BAMEM_BASE’ defined but not used [-Wunused-const-variable=]
45 | static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:41:26: warning: ‘ISP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
41 | static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:37:26: warning: ‘ISP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
37 | static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
In file included from ./drivers/staging/media/atomisp//pci/ia_css_acc_types.h:23,
from ./drivers/staging/media/atomisp//pci/ia_css_pipe_public.h:29,
from drivers/staging/media/atomisp/pci/sh_css_legacy.h:23,
from drivers/staging/media/atomisp/pci/atomisp_internal.h:34,
from drivers/staging/media/atomisp/pci/atomisp_cmd.h:30,
from drivers/staging/media/atomisp/pci/atomisp_csi2.c:21:
./drivers/staging/media/atomisp//pci/system_local.h:193:26: warning: ‘STREAM2MMIO_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
193 | static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = {
| ^~~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:186:26: warning: ‘PIXELGEN_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
186 | static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = {
| ^~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:179:26: warning: ‘CSI_RX_BE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
179 | static const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:172:26: warning: ‘CSI_RX_FE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
172 | static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:165:26: warning: ‘ISYS_IRQ_BASE’ defined but not used [-Wunused-const-variable=]
165 | static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:158:26: warning: ‘IBUF_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
158 | static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:153:26: warning: ‘RX_BASE’ defined but not used [-Wunused-const-variable=]
153 | static const hrt_address RX_BASE[N_RX_ID] = {
| ^~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:138:26: warning: ‘INPUT_SYSTEM_BASE’ defined but not used [-Wunused-const-variable=]
138 | static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:130:26: warning: ‘INPUT_FORMATTER_BASE’ defined but not used [-Wunused-const-variable=]
130 | static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = {
| ^~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:125:26: warning: ‘TIMED_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
125 | static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = {
| ^~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:120:26: warning: ‘GPIO_BASE’ defined but not used [-Wunused-const-variable=]
120 | static const hrt_address GPIO_BASE[N_GPIO_ID] = {
| ^~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:116:26: warning: ‘GP_TIMER_BASE’ defined but not used [-Wunused-const-variable=]
116 | static const hrt_address GP_TIMER_BASE =
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:109:26: warning: ‘GP_DEVICE_BASE’ defined but not used [-Wunused-const-variable=]
109 | static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:96:26: warning: ‘FIFO_MONITOR_BASE’ defined but not used [-Wunused-const-variable=]
96 | static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:90:26: warning: ‘GDC_BASE’ defined but not used [-Wunused-const-variable=]
90 | static const hrt_address GDC_BASE[N_GDC_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:78:26: warning: ‘IRQ_BASE’ defined but not used [-Wunused-const-variable=]
78 | static const hrt_address IRQ_BASE[N_IRQ_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:73:26: warning: ‘ISYS2401_DMA_BASE’ defined but not used [-Wunused-const-variable=]
73 | static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:69:26: warning: ‘DMA_BASE’ defined but not used [-Wunused-const-variable=]
69 | static const hrt_address DMA_BASE[N_DMA_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:63:26: warning: ‘MMU_BASE’ defined but not used [-Wunused-const-variable=]
63 | static const hrt_address MMU_BASE[N_MMU_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:54:26: warning: ‘SP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
54 | static const hrt_address SP_DMEM_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:50:26: warning: ‘SP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
50 | static const hrt_address SP_CTRL_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:45:26: warning: ‘ISP_BAMEM_BASE’ defined but not used [-Wunused-const-variable=]
45 | static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:41:26: warning: ‘ISP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
41 | static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:37:26: warning: ‘ISP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
37 | static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
In file included from ./drivers/staging/media/atomisp//pci/ia_css_acc_types.h:23,
from ./drivers/staging/media/atomisp//pci/ia_css_pipe_public.h:29,
from drivers/staging/media/atomisp/pci/sh_css_legacy.h:23,
from drivers/staging/media/atomisp/pci/atomisp_internal.h:34,
from drivers/staging/media/atomisp/pci/atomisp_acc.h:23,
from drivers/staging/media/atomisp/pci/atomisp_acc.c:29:
./drivers/staging/media/atomisp//pci/system_local.h:193:26: warning: ‘STREAM2MMIO_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
193 | static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = {
| ^~~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:186:26: warning: ‘PIXELGEN_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
186 | static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = {
| ^~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:179:26: warning: ‘CSI_RX_BE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
179 | static const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:172:26: warning: ‘CSI_RX_FE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
172 | static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:165:26: warning: ‘ISYS_IRQ_BASE’ defined but not used [-Wunused-const-variable=]
165 | static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:158:26: warning: ‘IBUF_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
158 | static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:153:26: warning: ‘RX_BASE’ defined but not used [-Wunused-const-variable=]
153 | static const hrt_address RX_BASE[N_RX_ID] = {
| ^~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:138:26: warning: ‘INPUT_SYSTEM_BASE’ defined but not used [-Wunused-const-variable=]
138 | static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:130:26: warning: ‘INPUT_FORMATTER_BASE’ defined but not used [-Wunused-const-variable=]
130 | static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = {
| ^~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:125:26: warning: ‘TIMED_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
125 | static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = {
| ^~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:120:26: warning: ‘GPIO_BASE’ defined but not used [-Wunused-const-variable=]
120 | static const hrt_address GPIO_BASE[N_GPIO_ID] = {
| ^~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:116:26: warning: ‘GP_TIMER_BASE’ defined but not used [-Wunused-const-variable=]
116 | static const hrt_address GP_TIMER_BASE =
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:109:26: warning: ‘GP_DEVICE_BASE’ defined but not used [-Wunused-const-variable=]
109 | static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:96:26: warning: ‘FIFO_MONITOR_BASE’ defined but not used [-Wunused-const-variable=]
96 | static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:90:26: warning: ‘GDC_BASE’ defined but not used [-Wunused-const-variable=]
90 | static const hrt_address GDC_BASE[N_GDC_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:78:26: warning: ‘IRQ_BASE’ defined but not used [-Wunused-const-variable=]
78 | static const hrt_address IRQ_BASE[N_IRQ_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:73:26: warning: ‘ISYS2401_DMA_BASE’ defined but not used [-Wunused-const-variable=]
73 | static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:69:26: warning: ‘DMA_BASE’ defined but not used [-Wunused-const-variable=]
69 | static const hrt_address DMA_BASE[N_DMA_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:63:26: warning: ‘MMU_BASE’ defined but not used [-Wunused-const-variable=]
63 | static const hrt_address MMU_BASE[N_MMU_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:54:26: warning: ‘SP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
54 | static const hrt_address SP_DMEM_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:50:26: warning: ‘SP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
50 | static const hrt_address SP_CTRL_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:45:26: warning: ‘ISP_BAMEM_BASE’ defined but not used [-Wunused-const-variable=]
45 | static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:41:26: warning: ‘ISP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
41 | static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:37:26: warning: ‘ISP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
37 | static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
After removing the unused 32-bits data, the isp2401_system_local.h
now contains everything that it is needed, either by isp2401 or
by isp2400.
So, remove code duplication.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Right now, there are two versions of system_global.h headers.
Both share a lot of common code. There are some ISP2401 specific
types on one of the headers, but it doesn't conflict with the
ISP2400 ones.
Also, the common code is identical.
So, remove code duplication by moving such code into a
common header.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There is an abstraction at the code in order to support
32 or 64 bits address/data length. However, for all
Atom chipsets supported by this version, the size is fixed.
So, cleanup the mess, removing the uused code and placing
the data sizes on a single place.
The end goal is to completely remove those local/global
headers, replacing them by some ISP-version dependent struct,
in order for the driver to decide what version it would need
in runtime.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are several static vars declared inside the
system local headers. This causes lots of warnings when W=1.
Remove the unused ones.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If gmin_camera_platform_data() returns NULL then we should return a
negative error instead of success.
Fixes: 90ebe55ab8 ("media: staging: atomisp: Add driver prefix to Kconfig option and module names")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
trace_printk should not be used in production code, replace it
call with pr_info.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This patch fixes the checkpatch.pl warning:
Prefer using '"%s...", __func__' to using '<function name>',
this function's name, in a string
Signed-off-by: Baidyanath Kundu <kundubaidya99@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
I'm pretty sure I named this right, but it sounds that I ended
doing something weird maybe while solving some conflict.
So, fix the title of this config var.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Don't populate const arrays on the stack but instead make them
static. Makes the object code smaller by 150 bytes.
Before:
text data bss dec hex filename
111083 23692 64 134839 20eb7 atomisp/pci/atomisp_compat_css20.o
After:
text data bss dec hex filename
110773 23852 64 134689 20e21 atomisp/pci/atomisp_compat_css20.o
After:
(gcc version 9.3.0, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Compiler is not happy about leftovers:
cc1: warning: .../pci/hrt/: No such file or directory [-Wmissing-include-dirs]
cc1: warning: .../pci/hive_isp_css_include/memory_access/: No such file or directory [-Wmissing-include-dirs]
cc1: warning: .../pci/css_2400_system/hrt/: No such file or directory [-Wmissing-include-dirs]
Drop them from Makefile.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
First of all ACPI HID is a part of the device name which is printed
as a part of the dev_info(dev, ...); line. Second, since the only BID
is left, it's a part of ACPI path, which can be printed via %pfw.
Besides that, drop ACPI handle from atomisp_get_acpi_power() parameters.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Provide Gmin subdev as parameter to gmin_subdev_add()
to avoid direct global variable usage.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use temporary variable for device in gmin_subdev_add().
While here, drop unused temporary variable for device in other places.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Refactor PMIC detection to a separate function. In the future
we may move this code somewhere else where it's more suitable.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Deduplicate return ret in gmin_i2c_write().
While here, replace 'Kernel' by 'kernel' in the message and
reduce amount of LOCs.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When we enumerate second device when PMIC has been successfully detected
to AXP, we got into troubles dereferencing NULL pointer. It seems
we have to detect PMIC only once because pmic_id is a global variable
and code doesn't expect the change of it: Two PMICs on one platform?
It's impossible.
Crash excerpt:
[ 34.335237] BUG: kernel NULL pointer dereference, address: 0000000000000002
...
[ 35.652036] RIP: 0010:gmin_subdev_add.cold+0x32f/0x33e [atomisp_gmin_platform]
So, as a quick fix make power a global variable. In next patches we move
PMIC detection to be more independent from subdevices.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are devices with completely different _DSM() format,
and accessing object as a package leads to crashes.
Bail out in the case of unexpected object type.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add few blank lines to make platform data more readable.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Refactor code to avoid use of atomisp_dev global variable
where it's easy to achieve.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
We have special helpers to access MMIO. Use them.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Unify pdev to be pointer to struct pci_device.
While here, reindent some (touched) lines for better readability.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
struct atomisp device has struct device and struct pci_dev pointers
which are basically duplicates of each other. Drop the latter
in favour of the former.
While here, unify pdev to be pointer to struct pci_device and reindent
some (touched) lines for better readability.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There is no need to pass a pointer to struct device_driver
when we have an access to struct device already.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are specific ACPI and I\xB2C APIs to match device by different
parameters, such as ACPI HID, and retrieve an I\xB2C client.
Use them instead of home grown approach.
Note, it fixes a resource leak as well.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
IOSF MBI header contains a lot of definitions, such as
end point addresses of IPs. Move CCK address from AtomISP driver
to generic header.
While here, drop unused one.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Intel MID special header is not in use in this driver.
Replace it with a better macro for now on.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Instead of parsing GPIO for two exceptions inside the logic
which would be trying to use the GPIO, move the init code
to the routine which adds a new gmin device.
Move the notes to it too, as this helps to identify where
those two GPIO settings are used, explaining why they're
defaulting to -1 when not found.
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There's only one place where a subdev can be added: when the
sensor driver registers it. Trying to do it elsewhere will
cause problems, as the detection code needs to access the
I2C bus in order to probe some things.
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If the ACPI DSDT tables provide _CRS for the camera, the
GPIO core code should be able to handle them automatically.
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The media core has now a check if fi->pad is bigger than zero
or bigger than sd->entity.num_pads, if the media controller
is defined.
This causes a call to g_frame_interval to return -EINVAL.
Fix it by first cleaning up the struct.
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Newer devices don't place the PMIC CLK line inside an EFI
var. Instead, those are found at the _PR0 table.
Add a parser for it, using info stored via the DSDT table.
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add support code for this driver to use ACPI power management.
Yet, at least with known devices, this won't work without
further changes.
The rationale is that the ACPI handling code checks for the _PR? tables
in order to know what is required to switch the device from power state
D0 (_PR0) up to D3COLD (_PR3).
The adev->flags.power_manageable is set to true if the device has a _PR0
table, which can be checked by calling acpi_device_power_manageable(adev).
However, this only says that the device can be set to power off mode.
At least on the DSDT tables we've seen so far, there's no _PR3 nor _PS3
(which would have a somewhat similar effect).
So, using ACPI for power management won't work, except if adding
an ACPI override logic somewhere.
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The gmin_subdev_add() currently doesn't use ACPI device
power management. In order to prepare for adding support
for it, let's shift some things, placing the PM-related
stuff at the end of the probing logic.
Let's also store the current gs on a temporary var, in
order to simplify the source code.
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Right now, the driver is not doing the right thing to detect
the clock like used by the sensor, at least on devices
without the gmin's EFI vars.
Add some notes at the code to explain why and skip the wrong
value provided by the _DSM table.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This code reads from the array before verifying that "trig" is a valid
index. If the index is wildly out of bounds then reading from an
invalid address could lead to an Oops.
Fixes: a8c66b684e ("staging: comedi: addi_apci_1500: rewrite the subdevice support functions")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20200709102936.GA20875@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "ie_len" variable is in the 0-255 range and it comes from the
network. If it's over NDIS_802_11_LENGTH_RATES_EX (16) then that will
lead to memory corruption.
Fixes: 554c0a3abf ("staging: Add rtl8723bs sdio wifi driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200603101958.GA1845750@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function hif_scan() return the timeout for the completion of the
scan request. It is the only function from hif_tx.c that return another
thing than just an error code. This behavior is not coherent with the
rest of file. Worse, if value returned is positive, the caller can't
make say if it is a timeout or the value returned by the hardware.
Uniformize API with other HIF functions, only return the error code and
pass timeout with parameters.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200529121256.1045521-1-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is guarantee that the loop will stop at first iteration. So drop the
loop.
Fixes: 6bf418c50f ("staging: wfx: change the way to choose frame to send")
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200529121603.1050891-2-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to work properly all the queues of the device must be filled (the
device chooses itself the queue to use depending of AC parameters and
other things). It is the job of wfx_tx_queues_get_skb() to choose which
queue must be filled. However, the sorting algorithm was inverted, so it
prioritized the already filled queue! Consequently, the AC priorities was
badly broken.
Fixes: 6bf418c50f ("staging: wfx: change the way to choose frame to send")
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200529121603.1050891-1-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
