The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/8d7b192ade744a70da4d7bc681ee4e00f9d04ba9.1703006638.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
On some MAX 10 cards, the BMC firmware is not available to service
handshake registers during secure update erase and write phases at
normal speeds. This problem affects at least hwmon driver. When the MAX
10 hwmon driver tries to read the sensor values during a secure update,
the reads are slowed down (e.g., reading all D5005 sensors takes ~24s
which is magnitudes worse than the normal <0.02s).
Manage access to the handshake registers using a rw semaphore and a FW
state variable to prevent accesses during those secure update phases
and return -EBUSY instead.
If handshake_sys_reg_nranges == 0, don't update bwcfw_state as it is not
used. This avoids the locking cost.
Co-developed-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Co-developed-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230417092653.16487-5-ilpo.jarvinen@linux.intel.com
Wrap regmap_update_bits() with m10bmc_sys_update_bits() in order to be
able to add additional checks into it.
Co-developed-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230417092653.16487-3-ilpo.jarvinen@linux.intel.com
- Change MFD support status from Supported to Maintained
- New Drivers
- Add support for the Intel Platform Management Component Interface (PMCI)
- Remove Drivers
- HTC PASIC3 LED/DS1WM
- Toshiba T7L66XB, TC6387XB and TC6393XB TMIO
- New Device Support
- Add support for N6000 Flash to Intel M10 BMC PMCI
- Add support for Lenovo Yoga Tab 3 to Intel CHTWC PMIC
- New Functionality
- Provide Reset support to Syscon
- Fix-ups
- Explicitly provide missing include files
- Pass platform type data/info via the SPI/I2C/DT registration strategy
- Lots of DT documentation / adaptions
- Replace scnprintf() with preferred sysfs_emit()
- Remove unused / superfluous code
- Fix some trivial whitesspace / spelling / grammatical issues
- Replace pm_power_off with new and improved register_sys_off_handler() API
- Bug Fixes
- Reintroduce RK808-clkout registration - fixing Wi-Fi and Bluetooth
- Repair the order of AXPxxx IRQ PEK RISE/FALL definitions
- Refuse to build CS5535 on unsupported UML architectures
- Fix memory leaks in error return paths
- Prevent refcount leaks in error return paths
-----BEGIN PGP SIGNATURE-----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=f0fr
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Framework:
- Change MFD support status from Supported to Maintained
New Drivers:
- Add support for the Intel Platform Management Component Interface
(PMCI)
Removed Drivers:
- HTC PASIC3 LED/DS1WM
- Toshiba T7L66XB, TC6387XB and TC6393XB TMIO
New Device Support:
- Add support for N6000 Flash to Intel M10 BMC PMCI
- Add support for Lenovo Yoga Tab 3 to Intel CHTWC PMIC
New Functionality:
- Provide Reset support to Syscon
Fix-ups:
- Explicitly provide missing include files
- Pass platform type data/info via the SPI/I2C/DT registration
strategy
- Lots of DT documentation / adaptions
- Replace scnprintf() with preferred sysfs_emit()
- Remove unused / superfluous code
- Fix some trivial whitesspace / spelling / grammatical issues
- Replace pm_power_off with new and improved
register_sys_off_handler() API
Bug Fixes:
- Reintroduce RK808-clkout registration - fixing Wi-Fi and Bluetooth
- Repair the order of AXPxxx IRQ PEK RISE/FALL definitions
- Refuse to build CS5535 on unsupported UML architectures
- Fix memory leaks in error return paths
- Prevent refcount leaks in error return paths"
* tag 'mfd-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (40 commits)
dt-bindings: mfd: qcom,tcsr: Add compatible for IPQ5332
dt-bindings: mfd: Add NXP BBNSM
mfd: ntxec: Add version number for EC in Tolino Vision
dt-bindings: mfd: syscon: Add mt8365-syscfg
mfd: Remove toshiba tmio drivers
mfd: arizona: Use pm_runtime_resume_and_get() to prevent refcnt leak
mfd: syscon: Allow reset control for syscon devices
dt-bindings: mfd/syscon: Add resets property
dt-bindings: mfd: syscon: Add amd,pensando-elba-syscon compatible
dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8226
mfd: simple-mfd-i2c: Fix incoherent comment regarding DT registration
mfd: axp20x: Switch to the sys-off handler API
mfd: core: Spelling s/compement/complement/
mfd: max8925: Remove the unused function irq_to_max8925()
mfd: qcom-pm8xxx: Remove set but unused variable 'rev'
dt-bindings: mfd: syscon: Document GXP register compatible
mfd: twl4030-power: Drop empty platform remove function
mfd: twl: Fix TWL6032 phy vbus detection
mfd: pcf50633-adc: Fix potential memleak in pcf50633_adc_async_read()
MAINTAINERS: Move MFD from a Supported to Maintaied state
...
Add support for PMCI-based flash access path and N6000 sec update
support. Access to flash staging area is different for N6000 from that
of the SPI interfaced counterparts.
Introduce intel_m10bmc_flash_bulk_ops to allow interface specific
differentiations for the flash access path for sec update and make
m10bmc_sec_read/write() in sec update driver to use the new operations.
The .flash_mutex serializes read/read. Flash update (erase+write) must
use ->lock/unlock_write() to prevent reads during update (reads would
timeout on setting flash MUX as BMC will prevent it).
Create a type specific RSU status reg handler for N6000 because the
field has moved from doorbell to auth result register.
If a failure is detected while altering the flash MUX, it seems safer
to try to set it back and doesn't seem harmful. Likely there are enough
troubles in that case anyway so setting it back fails too (which is
harmless sans the small extra delay) or just confirms that the value
wasn't changed.
Co-developed-by: Tianfei zhang <tianfei.zhang@intel.com>
Signed-off-by: Tianfei zhang <tianfei.zhang@intel.com>
Co-developed-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230116100845.6153-12-ilpo.jarvinen@linux.intel.com
The rsu status field moves from the doorbell register to the auth
result register in the PMCI implementation of the MAX10 BMC. In order
to prepare for that, refactor the sec update driver code to have a type
specific ops that provides ->rsu_status().
Co-developed-by: Tianfei zhang <tianfei.zhang@intel.com>
Signed-off-by: Tianfei zhang <tianfei.zhang@intel.com>
Co-developed-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230116100845.6153-10-ilpo.jarvinen@linux.intel.com
RSU_STAT_* and RSU_PROG_* checks are done in more than one place in the sec
update code. Move the checks into new helper functions.
No function changes intended.
Co-developed-by: Tianfei zhang <tianfei.zhang@intel.com>
Signed-off-by: Tianfei zhang <tianfei.zhang@intel.com>
Co-developed-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230116100845.6153-9-ilpo.jarvinen@linux.intel.com
Access to flash staging area is different for N6000 from that of the
SPI interfaced counterparts. To make it easier to differentiate flash
access path, move read/write into new functions where the new access
path can be easily placed into. Rework the unaligned access such the
behavior it matches for both read and write.
This change also renames m10bmc_sec_write() to m10bmc_sec_fw_write() as
it would have a name conflict otherwise.
Co-developed-by: Tianfei zhang <tianfei.zhang@intel.com>
Signed-off-by: Tianfei zhang <tianfei.zhang@intel.com>
Co-developed-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230116100845.6153-7-ilpo.jarvinen@linux.intel.com
There are different addresses for the MAX10 CSR registers. Introducing
a new data structure m10bmc_csr_map for the register definition of
MAX10 CSR.
Provide the csr_map for SPI.
Co-developed-by: Tianfei zhang <tianfei.zhang@intel.com>
Signed-off-by: Tianfei zhang <tianfei.zhang@intel.com>
Reviewed-by: Russ Weight <russell.h.weight@intel.com>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230116100845.6153-6-ilpo.jarvinen@linux.intel.com
Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and features,
the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY0GQmA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylyVQCeNJjZ3hy+Wz8WkPSY+NkehuIhyCIAnjXMOJP8
5G/JQ+rpcclr7VOXlS66
=zVkU
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and
features, the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits)
w1: Split memcpy() of struct cn_msg flexible array
spmi: pmic-arb: increase SPMI transaction timeout delay
spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes
spmi: pmic-arb: correct duplicate APID to PPID mapping logic
spmi: pmic-arb: add support to dispatch interrupt based on IRQ status
spmi: pmic-arb: check apid against limits before calling irq handler
spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
spmi: pmic-arb: handle spurious interrupt
spmi: pmic-arb: add a print in cleanup_irq
drivers: spmi: Directly use ida_alloc()/free()
MAINTAINERS: add TI ECAP driver info
counter: ti-ecap-capture: capture driver support for ECAP
Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items
dt-bindings: counter: add ti,am62-ecap-capture.yaml
counter: Introduce the COUNTER_COMP_ARRAY component type
counter: Consolidate Counter extension sysfs attribute creation
counter: Introduce the Count capture component
counter: 104-quad-8: Add Signal polarity component
counter: Introduce the Signal polarity component
counter: interrupt-cnt: Implement watch_validate callback
...
There is an error check following the allocation of flash_buf that returns
without freeing flash_buf. It makes more sense to do the error check
before the allocation and the reordering eliminates the memory leak.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 154afa5c31 ("fpga: m10bmc-sec: expose max10 flash update count")
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220916235205.106873-1-russell.h.weight@intel.com
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Add a driver name for the D5005 BMC secure update driver. Different
driver names are used for the N3000 and D5005 devices because future
changes will add conditional code based on the device type (N3000
vs D5005). This change enables D5005 secure updates of BCM images,
BMC firmware, static-region images, etc.
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20220902165706.518074-3-russell.h.weight@intel.com
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Create firmware upload ops and call the Firmware Upload support of the
Firmware Loader subsystem to enable FPGA image uploads for secure
updates of BMC images, FPGA images, etc.
Tested-by: Tianfei Zhang <tianfei.zhang@intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20220606160038.846236-6-russell.h.weight@intel.com
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Extend the MAX10 BMC Secure Update driver to provide sysfs files to
expose the 128 bit code signing key (CSK) cancellation vectors. These use
the standard bitmap list format (e.g. 1,2-6,9).
Each CSK is assigned an ID, a number between 0-127, during the signing
process. CSK ID cancellation information is stored in 128-bit fields in
write-once locations in flash. The cancellation of a CSK can be used
to prevent the card from being rolled back to older images that were
signed with a CSK that is now cancelled.
Reviewed-by: Tom Rix <trix@redhat.com>
Tested-by: Tianfei Zhang <tianfei.zhang@intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20220606160038.846236-5-russell.h.weight@intel.com
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Create a sub-driver for the FPGA Card BMC in order to support secure
updates. This patch creates the Max10 BMC Secure Update driver and
provides sysfs files for displaying the root entry hashes (REH) for the
FPGA static region (SR), the FPGA Partial Reconfiguration (PR) region,
and the card BMC.
The Intel MAX10 BMC Root of Trust (RoT) requires that all BMC Nios firmware
and FPGA images are authenticated using ECDSA before loading and executing
on the card. Code Signing Keys (CSK) are used to sign images. CSKs are
signed by a root key. The root entry hash is created from the root public
key.
The RoT provides authentication by storing an REH bitstream to a write-once
location. Image signatures are verified against the hash.
Reviewed-by: Tom Rix <trix@redhat.com>
Tested-by: Tianfei Zhang <tianfei.zhang@intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20220606160038.846236-3-russell.h.weight@intel.com
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Uwe Kleine-König