Greybus SPI driver depends on gb-spilib and we need to state that at
makefile to make it link correctly.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
No need to support older kernel versions in the Greybus Power Supply
driver, so remove the checks as needed, we can now rely on all of the
correct Power Supply core apis being present. Also move some properties
definitions to the power supply greybus code.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
No need to support older kernel versions in the Greybus SDIO driver, so
remove the checks as needed, we can now rely on all of the correct SDIO
core apis being present.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
No need to support older kernel versions in the Greybus Light driver, so
remove the checks as needed, we can now rely on all of the correct LED
core apis being present. And compile only if flash and v4l2 flash is
reachable.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The 0-day bot pointed out a type difference in one min() call, so fix it
up by being explicit about the type being compared.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
No need to support older kernel versions in the Greybus SPI and spilib
driver, so remove the checks as needed, we can now rely on all of the
correct SPI core apis being present.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
No need to support older kernel versions in the Greybus GPIO driver, so
remove the checks as needed, we can now rely on all of the correct
GPIO core apis being present.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
No need to support older kernel versions in the Greybus Vibrator driver,
so remove the checks as needed, we can now rely on all of the correct
driver core apis being present.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
No need to support older kernel versions in the Greybus HID driver, so
remove the checks as needed, we can now rely on all of the "new" apis
being present.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Now that we do not care about the kernel version we are building
against, we can strip out lots of backward compatibilty that was added
to kernel_ver.h in order to write semi-portable driver code.
To start with, remove the functions and #defines that are now in the
kernel tree, no need to have duplicate copies of them all.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This adds a proper Kconfig file for drivers/staging/greybus and fixes up
the Makefile to work correctly within the kernel build system (modules
depend on the .config options, etc.)
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The Toshiba ES1 chip is no longer around, so remove the USB descriptor
documentation for it as no one cares anymore.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Only the tools subdirectory needs a .gitignore entry, so move it there
and fix it up to only list the needed file.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
We don't need yet-another-copy of the GPLv2 in the tree, and the README
is now pointless, so remove both of these files.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
We do not need an example of the sysfs tree in the kernel code itself,
so remove these files, as they are now pointless.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
When the greybus tree was external, it contained a copy of checkpatch.pl
to keep everyone "in line". This is no longer needed and can now be
removed.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This pulls the external greybus driver tree into 4.8-rc6 as it should be
part of the main kernel tree and not live outside in some lonely github
repo, never to be reunited with it's true love...
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With all of the the missing patches from the
lustre 2.7 version merged upstream its time to update
the upstream clients version.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The previous patch, http://review.whamcloud.com/21304/, removed
a check needed until LU-5718 is properly addressed. With
the check, LU-5718 results in an error message and a lost
RDMA operation. Without it, we have memory corruption and
a crash (much harder to debug).
Putting the check back in case LU-5718 is not fixed soon.
Signed-off-by: Doug Oucharek <doug.s.oucharek@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7650
Reviewed-on: http://review.whamcloud.com/22281
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Olaf Weber <olaf@sgi.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The code to allow peer_credits to be set per NI was originally
"left inactive" because there were concerns about peer_credits
interfering with the ability for IB nodes to connect to each
other when peer_credits are not the same (peer_credits controls
the queue depth for IB). With LU-3322, the values do not have
to match so it is now safe to enable this code so peer_credits
can be set per NI.
This patch enables existing code for setting per NI peer_credits.
Second this patch fixes a long standing bug in that the conf data
was not being used to set variables in the lnet_ni structure until
after lnd_startup() was called which meant LND drivers were
ignoring struct lnet_ni tunable values being set. Now we change
struct lnet_ni data fields based on conf data before calling
lnd_startup().
Signed-off-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8507
Reviewed-on: http://review.whamcloud.com/21948
Reviewed-by: Olaf Weber <olaf@sgi.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In lnet_rtrpools_enable(), a mistake was made and routing
was not being turned on when the rtrpools are being allocated
for the first time.
This patch fixes that routine so we remember to turn on
routing after allocating the rtrpools.
Signed-off-by: Doug Oucharek <doug.s.oucharek@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8501
Reviewed-on: http://review.whamcloud.com/21934
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Amir Shehata <amir.shehata@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add new 'ni_net_ns' field to struct lnet_ni to hold a reference
to original net namespace in which ni is created.
In LNetDist(), check if ni was created in same net namespace as
current's one. If not, assign order above 0xffff0000, to make
this ni not a priority.
Signed-off-by: Sebastien Buisson <sbuisson@ddn.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7845
Reviewed-on: http://review.whamcloud.com/21884
Reviewed-by: Olaf Weber <olaf@sgi.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the migrating directory is under striped directory, it needs
to set right stripe FID for its parent.
Signed-off-by: wang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6263
Reviewed-on: http://review.whamcloud.com/13817
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The client_obd::cl_default_mds_easize field should track the largest
observed EA size advertised by the MDT, subject to a reasonable upper
bound. The MDC uses cl_default_mds_easize to calculate the initial
size of request buffers. The default value should be small enough to
avoid wasted memory and excessive use of vmalloc(), yet large enough
to accommodate the common use case.
In the current code, the default value is only updated if
client_obd::cl_max_mds_easize is strictly less than
mdt_body::mbo_max_mdsize. This condition is almost never met, because
client_obd::cl_max_mds_easize is computed at client mount-time based
on the number of OSTs in the filesystem, so the MDT won't ever observe
and advertise an EA size larger than that.
As a result, client_obd::cl_default_mds_easize indefinitely retains
its initial value, which is computed at client mount-time based on
the filesystem's default stripe width. Any getattr() requests for
widely striped files will consequently allocate a request buffer
that is too small, forcing reallocations on both the client and
server side. To avoid this, update client_obd::cl_default_mds_easize
independently of the value of client_obd::cl_max_mds_easize.
In addition, this patch includes these changes:
- Add comments to the client_obd structure to clarify what the
cl_{default,max}_mds_{cookie,ea}size values mean.
- Prevent mdc_get_info() from storing uninitialized data in
client_obd::cl_max_mds_cookiesize.
- Use 4096 as an upper bound for the default values. The former
bound of PAGE_CACHE_SIZE is too large on 64k-page platforms
(i.e. PPC), so it fails to prevent the vmalloc() spinlock
contention described in LU-3338. The new value was chosen to
be large enough to accommodate common use cases while staying
well below the 16k threshold at which allocations start using
vmalloc().
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Kyle Blatter <kyleblatter@llnl.gov>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5549
Reviewed-on: http://review.whamcloud.com/11614
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow default_easize to be tuned via /sysfs. A system administrator
might want this if a rare access to widely striped files drives up the
value on a filesystem where narrowly striped files are the more common
case. In practice, however, this is wanted primarily to facilitate
a test case for LU-5549.
- Plumb the necessary interfaces through the LMV and MDC layers
to expose write access to this value by higher layers.
- Add block comments to modified functions.
Signed-off-by: Ned Bass <bass6@llnl.gov>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5549
Reviewed-on: http://review.whamcloud.com/13112
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add indexing option to default dirstripe EA. If MDT find
out the client send the create req to the wrong MDT because
of default stripeEA, it will return -EREMOTE, then client
will retrieve default stripeEA through xattr cache, and
re-create the object.
Also merged patch for LU-6341 to resolve the following problem.
Use ll_dir_getstripe to get default stripeEA in ll_new_node(),
Because ll_getxattr_common requires admin rights for retrieving
default LMVEA (because of trusted- prefix), which might cause
mkdir (from normal user) failure.
If parent does not have default stripeEA, then child should always
be in the same MDT for mkdir. Otherwise MDT should return -EREMOTE,
then client will refresh the default stripe index, and recreate
the object.
Signed-off-by: wang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5523
Reviewed-on: http://review.whamcloud.com/13360
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6341
Reviewed-on: http://review.whamcloud.com/13990
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patch fixes the issue seen on the client with growing request
timeout which occurred after the server side patch landed for
LU-5079. While commit itself is correct, it reveals another
issue. If request is being processed for a long time on server
then client adaptive timeouts will adapt to that after receiving
reply and new requests will have bigger timeout. Another problem
is that server AT history is corrupted by recovery request
processing time which not pure service time but includes
also waiting time for clients to recover.
Patch prevents the AT stats update from early replies on client and
from recovering requests processing time on server.
The ptlrpc_at_recv_early_reply() still updates the current request
timeout as asked by server, but don't include this into AT stats.
The real reply will bring that data from server after all.
Signed-off-by: Mikhail Pershin <mike.pershin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6084
Reviewed-on: http://review.whamcloud.com/13520
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Jian Yu <jian.yu@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a parameter is permanently changed on the MGS the
MGS send a changelog packet to the proper nodes that
are affected by the change. Once the nodes receive the
change they then call the userland utility lctl to
change its local value. When calling a userland
application from the kernel you specify a flag to
control the interaction with the application. Originally
by default the flag was set to 0 which is UMH_NO_WAIT
which meant lctl was being called asynchronously. In
older kernels this was fine since UHM_NO_WAIT and
UHM_WAIT_PROC had nearly the same logic. This changed
with newer kernels which broke updating our parameters.
Plus doing a UHM_NO_WAIT doesn't report back a error
if something goes wrong with lctl. The fix is to set
the flag to UHM_WAIT_PROC so kernel space waits until
lctl has finished and we get a proper error code if
something does go wrong with lctl.
Signed-off-by: James Simmons <uja.ornl@gmail.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6063
Reviewed-on: http://review.whamcloud.com/13677
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A lot of symbols don't need to be exported at all because they are
only used in the module they belong to.
Signed-off-by: frank zago <fzago@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5829
Reviewed-on: http://review.whamcloud.com/12510
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because the inode and its connected dentries will be cleared
out of the cache after migration, the inode needs to be locked
during the migration.
Signed-off-by: wang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4712
Reviewed-on: http://review.whamcloud.com/9689
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A lot of symbols don't need to be exported at all because they are
only used in the module they belong to.
Signed-off-by: frank zago <fzago@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5829
Reviewed-on: http://review.whamcloud.com/13323
Reviewed-by: Jian Yu <jian.yu@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A lot of symbols don't need to be exported at all because they are
only used in the module they belong to.
Signed-off-by: frank zago <fzago@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5829
Reviewed-on: http://review.whamcloud.com/13321
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use at_max in osc_enter_cache() to bound how long we wait for grant
space before switching to synchronous I/Os. Do not print a message
on the console when the timeout is hit since such long wait can
be legitimate with flaky network (i.e. BRW is resent multiple times).
Signed-off-by: Johann Lombardi <johann.lombardi@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5521
Reviewed-on: http://review.whamcloud.com/12146
Reviewed-by: Niu Yawei <yawei.niu@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Do not revalidate slave stripes while holding master lock.
Otherwise if the revalidating slaves are blocked, then the
master lock can not be released in time.
Remove some unnecesary merging in ll_revalidate_slave(), and
the attributes will be stored in each stripe, only
merging them if required.
Signed-off-by: wang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6088
Reviewed-on: http://review.whamcloud.com/13432
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After DNE phase 2 has been added to client it sends
create request to slave MDT. DNT1-only server doesn't
expect request to slave MDT from client. It expects
only cross-mdt request from master MDT. Thus if DNE2
client tries to "mkdir -i 1" on DNE1 server, then
LBUG happened.
This patch adds OBD_CONNECT_DIR_STRIPE connection
flag check on client side. If striped directories are not
supported by server, then create requrest is sent to
master MDT.
Signed-off-by: Artem Blagodarenko <artem_blagodarenko@xyratex.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6071
Xyratex-bug-id: MRP-2319
Reviewed-on: http://review.whamcloud.com/13189
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: wang di <di.wang@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Store inode's fid in cl_setattr_ost() and OSC packs this info on the
wire (via lustre_set_wire_obdo) so that OST can use.
NOTE: currently lu_fid::f_ver and obdo::o_parent_ver are not used on
OFD device, and we use obdo::o_stripe_idx as
filter_fid::ff_parent::f_ver and save it to the device.
Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1154
Reviewed-on: http://review.whamcloud.com/12902
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
coo_attr_set() is used to update object's attribute but its name
makes confusion that people intuitively think that it is used to
pass object's attribute down to server sides.
Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1154
Reviewed-on: http://review.whamcloud.com/12888
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ll_lookup_it() may trigger IT_OPEN RPC to open a file by name.
But at that time, the client does not know the target file's GID,
so it cannot pack the necessary supplementary group ID in the RPC.
Because of missing the supplementary group ID, the RPC maybe fail
for open permission check on the MDS. Under such case, MDS should
return the target file's GID, if the current thread on the client
in the right group (according to the file's GID), the client will
try the IT_OPEN RPC again with the right supplementary group ID.
This patch is also helpful if some other(s) changed the file's GID
after current RPC sent to the MDS with the suppgid as the original
GID by race.
Signed-off-by: Fan Yong <fan.yong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5423
Reviewed-on: http://review.whamcloud.com/12476
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge the contents of lustre/include/linux/lvfs.h into
lustre/include/lvfs.h. Merge lustre/include/linux/lustre_user.h into
lustre/include/lustre/lustre_user.h. Move lustre_compat25.h and
lustre_patchless_compat.h from lustre/include/linux/ to
lustre/include/ and rename lustre_compat25.h to lustre_compat.h.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2675
Reviewed-on: http://review.whamcloud.com/13271
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Amir Shehata <amir.shehata@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cpumask_of_node can return NULL if NUMA node is unavailable,
in this case cfs_node_to_cpumask will try to copy from NULL
and cause kernel panic.
Signed-off-by: Liang Zhen <liang.zhen@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5751
Reviewed-on: http://review.whamcloud.com/13207
Reviewed-by: Li Wei <wei.g.li@intel.com>
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change type of cl_conn_count to size_t.
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5577
Reviewed-on: http://review.whamcloud.com/13125
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In ll_lov_setstripe_ea_info() release the inode size lock on all
appropriate exit paths.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6059
Reviewed-on: http://review.whamcloud.com/13167
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add comment blocks on lprocfs_stats_lock() and lprocfs_stats_unlock().
Move common NOPERCPU code out of the switch() statements to reduce
code size and complexity, since it doesn't depend on the opc at all.
Replace switch() in lprocfs_stats_unlock() with a simple if/else,
since the lock opc was already checked in lprocfs_stats_lock().
Add an enum for the lprocfs_stats_lock() operations to make it clear
what the valid values are and allow compiler checking.
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5946
Reviewed-on: http://review.whamcloud.com/12872
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An OSC object could be destroyed with AGL locks waiting for granted,
so we'd get rid of the osc_object_ast_clear() assertion that its
dlm locks all getting granted.
Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6042
Reviewed-on: http://review.whamcloud.com/13163
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Niu Yawei <yawei.niu@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mgc_apply_recover_logs use only first nid from entry,
this could be the problem for a cluster with several network
address for a one node.
Signed-off-by: Alexander Boyko <alexander.boyko@seagate.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5950
Xyratex-bug-id: MRP-2255
Reviewed-on: http://review.whamcloud.com/12829
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Reviewed-by: Ann Koehler <amk@cray.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Buggy code at ptlrpc_connect_interpret()
finish:
rc = ptlrpc_import_recovery_state_machine(imp);
...
Set import connection flags
When import has FULL state ptlrpc_import_recovery_state_machine()
wakeup all waiters on import and all delayed request, which was
resented. And it could happened that request was send without
updated flags and AT is disabled. If such request is in progress
on the server, server drop the new instance, and could do early reply
for it. But this early reply confuse client, cause it wait real
reply(no AT for this request). Client try to touch buffer outside
reply and got EPROTO error.
The same bug existed for initital connect too. Import became FULL
before import connection flags was set.
Signed-off-by: Alexander Boyko <alexander_boyko@xyratex.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5528
Xyratex-bug-id: MRP-2034
Reviewed-on: http://review.whamcloud.com/11723
Reviewed-by: Li Wei <wei.g.li@intel.com>
Reviewed-by: Alexander Boyko <alexander.boyko@seagate.com>
Reviewed-by: Liang Zhen <liang.zhen@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Flatten out the lsm_wire struct from the middle of struct
lov_stripe_md and remove the member name macros.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5814
Reviewed-on: http://review.whamcloud.com/12581
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
