mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-21 10:01:00 +00:00
9445 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Miaohe Lin
|
d38f6bcea8 |
ACPI: APEI: mark bert_disable as __initdata
It's only used inside the __init section. Mark it __initdata. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Compostella, Jeremy
|
896e97bf99 |
ACPI: EC: Clear GPE on interrupt handling only
On multiple devices I work on, we noticed that /sys/firmware/acpi/interrupts/sci_not is non-zero and keeps increasing over time. It turns out that there is a race condition between servicing a GPE interrupt and handling task driven transactions. If a GPE interrupt is received at the same time ec_poll() is running, the advance_transaction() clears the GPE flag and the interrupt is not serviced as acpi_ev_detect_gpe() relies on the GPE flag to call the handler. As a result, `sci_not' is increased. To address this, move the GPE status check and clearing from advance_transaction() directly into acpi_ec_handle_interrupt(), so the EC GPE only gets cleared in the interrupt handling path. Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> [ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Hans de Goede
|
aa8a950a5d |
ACPI: video: Stop trying to use vendor backlight control on laptops from after ~2012
There have been 2 separate reports now about a non working "dell_backlight" device getting registered under /sys/class/backlight 1 report for a Raptor Lake based Dell and 1 report for a Meteor Lake (development) platform. On hw from the last 10 years dell-laptop will not register "dell_backlight" because acpi_video_get_backlight_type() will return acpi_backlight_video there if called before the GPU/kms driver loads. So it does not matter if the GPU driver's native backlight is registered after dell-laptop loads. But it seems that on the latest generation laptops the ACPI tables no longer contain acpi_video backlight control support which causes acpi_video_get_backlight_type() to return acpi_backlight_vendor causing "dell_backlight" to get registered if the dell-laptop module is loaded before the GPU/kms driver. Vendor specific backlight control like the "dell_backlight" device is only necessary on quite old hw (from before acpi_video backlight control was introduced). Work around "dell_backlight" registering on very new hw (where acpi_video backlight control seems to be no more) by making acpi_video_get_backlight_type() return acpi_backlight_none instead of acpi_backlight_vendor as final fallback when the ACPI tables have support for Windows 8 or later (laptops from after ~2012). Suggested-by: Matthew Garrett <mjg59@srcf.ucam.org> Reported-by: AceLan Kao <acelan.kao@canonical.com> Closes: https://lore.kernel.org/platform-driver-x86/20230607034331.576623-1-acelan.kao@canonical.com/ Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Robin Murphy
|
87b3b6d53e |
ACPI/APMT: Don't register invalid resource
Don't register a resource for the second page unless the dual-page extension flag is actually present to say it's valid. CC: Lorenzo Pieralisi <lpieralisi@kernel.org> CC: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Reviewed-and-tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Link: https://lore.kernel.org/r/63b34656e1f7b41bcb458fb6d7496e04db757e0d.1685983270.git.robin.murphy@arm.com Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Sudeep Holla
|
fcea0ccf4f |
ACPI: bus: Consolidate all arm specific initialisation into acpi_arm_init()
Move all of the ARM-specific initialization into one function namely acpi_arm_init(), so it is not necessary to modify/update bus.c every time a new piece of it is added. Cc: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: Rafael J. Wysocki <rafael@kernel.org> Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/CAJZ5v0iBZRZmV_oU+VurqxnVMbFN_ttqrL=cLh0sUH+=u0PYsw@mail.gmail.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Reviewed-by: Shaoqin Huang <shahuang@redhat.com> Link: https://lore.kernel.org/r/20230606093531.2746732-1-sudeep.holla@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Mario Limonciello
|
f198478cfd |
ACPI: x86: s2idle: Adjust Microsoft LPS0 _DSM handling sequence
In Windows the Microsoft _DSM doesn't call functions 3->5->7 for suspend and 8->6->4 for resume like Linux currently does. Rather it calls 3->7->5 for suspend and 6->8->4 for resume. Align this calling order for Linux as well. Link: https://learn.microsoft.com/en-us/windows-hardware/design/device-experiences/modern-standby-states Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Mario Limonciello
|
a9c4a912b7 |
ACPI: resource: Remove "Zen" specific match and quirks
commit |
||
|
Arnd Bergmann
|
89d5b7178d |
ACPI: PM: s2idle: fix section mismatch warning
The acpi_sleep_suspend_setup() function is missing an __init annotation, which causes a warning in rare configurations that end up not inlining it into its caller: WARNING: modpost: vmlinux.o: section mismatch in reference: acpi_sleep_suspend_setup (section: .text) -> acpi_s2idle_setup (section: .init.text) It's only called from an __init function, so adding the annotation is correct here. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Miaohe Lin
|
4348270137 |
ACPI: APEI: GHES: Remove unused ghes_estatus_pool_size_request()
ghes_estatus_pool_size_request() is unused now, so remove it. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Arnd Bergmann
|
8f0e8597a7 |
ACPI: NFIT: Add declaration in a local header
The nfit_intel_shutdown_status() function has a __weak defintion in nfit.c and an override in acpi_nfit_test.c for testing purposes. This works without an extern declaration, but causes a W=1 build warning: drivers/acpi/nfit/core.c:1717:13: error: no previous prototype for 'nfit_intel_shutdown_status' [-Werror=missing-prototypes] Add a declaration in a header that gets included from both sides to shut up the warning and ensure that the prototypes actually match. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Rafael J. Wysocki
|
3ba12d8de3 |
ACPI: scan: Reduce overhead related to devices with dependencies
Notice that all of the objects for which the acpi_scan_check_dep() return value is greater than 0 are present in acpi_dep_list as consumers (there may be multiple entries for one object, but that is not a problem), so after carrying out the initial ACPI namespace walk in which devices with dependencies are skipped, acpi_bus_scan() can simply walk acpi_dep_list and enumerate all of the unique consumer objects from there and their descendants instead of walking the entire target branch of the ACPI namespace and looking for device objects that have not been enumerated yet in it. Because walking acpi_dep_list is generally less overhead than walking the entire ACPI namespace, use the observation above to reduce the system initialization overhead related to ACPI, which is particularly important on large systems. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> |
||
|
Linus Torvalds
|
792fc92140 |
First batch of EFI fixes for v6.4:
- fix harmless warning in zboot code on 'make clean'
- add some missing prototypes
- fix boot regressions triggered by PE/COFF header image minor version
bump
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZHjJNQAKCRAwbglWLn0t
XKrjAP9ZFwTZWvYKGWFYi119egU+HjpZmY8ccIG35sVt4TKRbgEAnTiMVWEggkuR
ETAd8mpk4pFjfa8yIY06Tdy3kjqIzgM=
=egis
-----END PGP SIGNATURE-----
Merge tag 'efi-fixes-for-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"A few minor fixes for EFI, one of which fixes the reported boot
regression when booting x86 kernels using the BIOS based loader built
into the hypervisor framework on macOS.
- fix harmless warning in zboot code on 'make clean'
- add some missing prototypes
- fix boot regressions triggered by PE/COFF header image minor
version bump"
* tag 'efi-fixes-for-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Bump stub image version for macOS HVF compatibility
efi: fix missing prototype warnings
efi/libstub: zboot: Avoid eager evaluation of objcopy flags
|
||
|
Sunil V L
|
e6b9d8eddb
|
drivers/acpi: RISC-V: Add RHCT related code
RHCT is a new table defined for RISC-V to communicate the features of the CPU to the OS. Create a new architecture folder in drivers/acpi and add RHCT parsing code. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com> Link: https://lore.kernel.org/r/20230515054928.2079268-11-sunilvl@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Sunil V L
|
8b7809e289
|
ACPI: processor_core: RISC-V: Enable mapping processor to the hartid
processor_core needs arch-specific functions to map the ACPI ID to the physical ID. In RISC-V platforms, hartid is the physical id and RINTC structure in MADT provides this mapping. Add arch-specific function to get this mapping from RINTC. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Link: https://lore.kernel.org/r/20230515054928.2079268-8-sunilvl@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Sunil V L
|
214c236223
|
ACPI: OSL: Make should_use_kmap() 0 for RISC-V
Without this, if the tables are larger than 4K, acpi_map() will fail. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20230515054928.2079268-6-sunilvl@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Sunil V L
|
4d02d88d2b
|
ACPI: tables: Print RINTC information when MADT is parsed
When MADT is parsed, print RINTC information as below: ACPI: RISC-V INTC (acpi_uid[0x0000] hart_id[0x0] enabled) ACPI: RISC-V INTC (acpi_uid[0x0001] hart_id[0x1] enabled) ... ACPI: RISC-V INTC (acpi_uid[0x000f] hart_id[0xf] enabled) This debug information will be very helpful during bring up. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Link: https://lore.kernel.org/r/20230515054928.2079268-5-sunilvl@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Arnd Bergmann
|
fd936fd8ac |
efi: fix missing prototype warnings
The cper.c file needs to include an extra header, and efi_zboot_entry needs an extern declaration to avoid these 'make W=1' warnings: drivers/firmware/efi/libstub/zboot.c:65:1: error: no previous prototype for 'efi_zboot_entry' [-Werror=missing-prototypes] drivers/firmware/efi/efi.c:176:16: error: no previous prototype for 'efi_attr_is_visible' [-Werror=missing-prototypes] drivers/firmware/efi/cper.c:626:6: error: no previous prototype for 'cper_estatus_print' [-Werror=missing-prototypes] drivers/firmware/efi/cper.c:649:5: error: no previous prototype for 'cper_estatus_check_header' [-Werror=missing-prototypes] drivers/firmware/efi/cper.c:662:5: error: no previous prototype for 'cper_estatus_check' [-Werror=missing-prototypes] To make this easier, move the cper specific declarations to include/linux/cper.h. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> |
||
|
Hans de Goede
|
fa578bf50e |
ACPI: LPSS: Add pwm_lookup_table entry for second PWM on CHT/BSW devices
BSW PWM2 is used for backlight control for fixed (etched into the glass) touch controls on some models. Add an entry for the second PWM controller to bsw_pwm_lookup, so that drivers can use pwm_get() to get a reference to it. These touch-controls have specialized drivers which bind to different devices on different models, so the consumer-device-name in the lookup table entry is set to NULL, so that only con-id matching is used. The con-id is set to "pwm_soc_lpss_2" which describes the PWM controller rather than the usual approach of describing its function. The specialized (model specific) drivers which need access to the PWM controller know they need the "pwm_soc_lpss_2" con-id. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Hans de Goede
|
bd5d93df86 |
ACPI: video: Add backlight=native DMI quirk for Lenovo ThinkPad X131e (3371 AMD version)
Linux defaults to picking the non-working ACPI video backlight interface on the Lenovo ThinkPad X131e (3371 AMD version). Add a DMI quirk to pick the working native radeon_bl0 interface instead. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Hans de Goede
|
48436f2e98 |
ACPI: video: Add backlight=native DMI quirk for Apple iMac11,3
Linux defaults to picking the non-working ACPI video backlight interface on the Apple iMac11,3 . Add a DMI quirk to pick the working native radeon_bl0 interface instead. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Hans de Goede
|
f91280f358 |
ACPI: x86: Add ACPI_QUIRK_UART1_SKIP for Lenovo Yoga Book yb1-x90f/l
The Lenovo Yoga Book yb1-x90f/l 2-in-1 which ships with Android as Factory OS has (another) bug in its DSDT where the UART resource for the BTH0 ACPI device contains "\\_SB.PCIO.URT1" as path to the UART. Note that is with a letter 'O' instead of the number '0' which is wrong. This causes Linux to instantiate a standard /dev/ttyS? device for the UART instead of a /sys/bus/serial device, which in turn causes bluetooth to not work. Similar DSDT bugs have been encountered before and to work around those the acpi_quirk_skip_serdev_enumeration() helper exists. Previous devices had the broken resource pointing to the first UART, while the BT HCI was on the second UART, which ACPI_QUIRK_UART1_TTY_UART2_SKIP deals with. Add a new ACPI_QUIRK_UART1_SKIP quirk for skipping enumeration of UART1 instead for the Yoga Book case and add this quirk to the existing DMI quirk table entry for the yb1-x90f/l . This leaves the UART1 controller unbound allowing the x86-android-tablets module to manually instantiate a serdev for it fixing bluetooth. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Hans de Goede
|
4fd5556608 |
ACPI: button: Add lid disable DMI quirk for Nextbook Ares 8A
The LID0 device on the Nextbook Ares 8A tablet always reports lid closed causing userspace to suspend the device as soon as booting is complete. Add a DMI quirk to disable the broken lid functionality. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Hans de Goede
|
69d6b37695 |
ACPI: x86: Add skip i2c clients quirk for Nextbook Ares 8A
The Nextbook Ares 8A is a x86 ACPI tablet which ships with Android x86 as factory OS. Its DSDT contains a bunch of I2C devices which are not actually there (the Android x86 kernel fork ignores I2C devices described in the DSDT). On this specific model this just not cause resource conflicts, one of the probe() calls for the non existing i2c_clients actually ends up toggling a GPIO or executing a _PS3 after a failed probe which turns the tablet off. Add a ACPI_QUIRK_SKIP_I2C_CLIENTS for the Nextbook Ares 8 to the acpi_quirk_skip_dmi_ids table to avoid the bogus i2c_clients and to fix the tablet turning off during boot because of this. Also add the "10EC5651" HID for the RealTek ALC5651 codec used in this tablet to the list of HIDs for which not to skipi2c_client instantiation, since the Intel SST sound driver relies on the codec being instantiated through ACPI. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Rubén Gómez
|
71a485624c |
ACPI: resource: Add IRQ override quirk for LG UltraPC 17U70P
Add an ACPI IRQ override quirk for LG UltraPC 17U70P to address the internal keyboard problem on it. Link: https://bugzilla.kernel.org/show_bug.cgi?id=213031 Link: https://bugzilla.kernel.org/show_bug.cgi?id=216983 Signed-off-by: Rubén Gómez Agudo <mrgommer@proton.me> [ rjw: Subject, changelog, white space damage fixes ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Thomas Gleixner
|
5475abbde7 |
x86/smpboot: Remove the CPU0 hotplug kludge
This was introduced with commit
|
||
|
Hans de Goede
|
3db66620ea |
ACPI: video: Remove acpi_backlight=video quirk for Lenovo ThinkPad W530
Remove the acpi_backlight=video quirk for Lenovo ThinkPad W530.
This was intended to help users of the (unsupported) Nvidia binary driver,
but this has been reported to cause backlight control issues for users
who have the gfx configured in hybrid (dual-GPU) mode, so drop this.
The Nvidia binary driver should call acpi_video_register_backlight()
when necessary and this has been reported to Nvidia.
Until this is fixed Nvidia binary driver users can work around this by
passing "acpi_backlight=video" on the kernel commandline (with the latest
6.1.y or newer stable series, kernels < 6.1.y don't need this).
Fixes:
|
||
|
Linus Torvalds
|
0153d8e695 |
More ACPI updates for 6.4-rc1
- Do not turn off unused power resources during initialization on the
Toshiba Click Mini (Hans de Goede).
- Support strings in device properties supplied by ACPI _DSM on Apple
platforms (Hector Martin).
- Add an ACPI device ID quirk for Lenovo Yoga Tablet 2 (Marius Hoch).
-----BEGIN PGP SIGNATURE-----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=XhG2
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These add two ACPI-related quirks and extend support for Apple device
properties supplied via ACPI _DSM.
Specifics:
- Do not turn off unused power resources during initialization on the
Toshiba Click Mini (Hans de Goede)
- Support strings in device properties supplied by ACPI _DSM on Apple
platforms (Hector Martin)
- Add an ACPI device ID quirk for Lenovo Yoga Tablet 2 (Marius Hoch)"
* tag 'acpi-6.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: property: Support strings in Apple _DSM props
ACPI: x86: utils: Remove Lenovo Yoga Tablet 2's MAGN0001
ACPI: PM: Do not turn of unused power resources on the Toshiba Click Mini
|
||
|
Linus Torvalds
|
667de5c684 |
More thermal control updates for 6.4-rc1
- Add compatible DT bindings for imx6sll and imx6ul to fix a dtbs check
warning (Stefan Wahren).
- Update the example in the DT bindings to reflect changes with the
ADC node name for QCom TM and TM5 (Marijn Suijten).
- Fix comments for the cpuidle_cooling_register() function to match the
function prototype (Chenggang Wang).
- Fix inconsistent temperature read and some Mediatek variant board
reboot by reverting a change and handling the temperature
differently (AngeloGioacchino Del Regno).
- Fix a memory leak in the initialization error path for the Mediatek
driver (Kang Chen).
- Use of_address_to_resource() in the Mediatek driver (Rob Herring).
- Fix unit address in the QCom tsens driver DT bindings (Krzysztof
Kozlowski).
- Clean up the step-wise thermal governor (Zhang Rui).
- Introduce thermal_zone_device() for accessing the device field of
struct thermal_zone_device and two drivers use it (Daniel Lezcano).
- Clean up the ACPI thermal driver a bit (Daniel Lezcano).
- Delete the thermal driver for Intel Menlow platforms that is not
expected to have any users (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=/bW2
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"These are mostly cleanups on top of the previously merged thermal
control changes plus some driver fixes and the removal of the Intel
Menlow thermal driver.
Specifics:
- Add compatible DT bindings for imx6sll and imx6ul to fix a dtbs
check warning (Stefan Wahren)
- Update the example in the DT bindings to reflect changes with the
ADC node name for QCom TM and TM5 (Marijn Suijten)
- Fix comments for the cpuidle_cooling_register() function to match
the function prototype (Chenggang Wang)
- Fix inconsistent temperature read and some Mediatek variant board
reboot by reverting a change and handling the temperature
differently (AngeloGioacchino Del Regno)
- Fix a memory leak in the initialization error path for the Mediatek
driver (Kang Chen)
- Use of_address_to_resource() in the Mediatek driver (Rob Herring)
- Fix unit address in the QCom tsens driver DT bindings (Krzysztof
Kozlowski)
- Clean up the step-wise thermal governor (Zhang Rui)
- Introduce thermal_zone_device() for accessing the device field of
struct thermal_zone_device and two drivers use it (Daniel Lezcano)
- Clean up the ACPI thermal driver a bit (Daniel Lezcano)
- Delete the thermal driver for Intel Menlow platforms that is not
expected to have any users (Rafael Wysocki)"
* tag 'thermal-6.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: menlow: Get rid of this driver
ACPI: thermal: Move to dedicated function sysfs extra attr creation
ACPI: thermal: Use thermal_zone_device()
thermal: intel: pch_thermal: Use thermal driver device to write a trace
thermal: core: Encapsulate tz->device field
thermal: gov_step_wise: Adjust code logic to match comment
thermal: gov_step_wise: Delete obsolete comment
dt-bindings: thermal: qcom-tsens: Correct unit address
thermal/drivers/mediatek: Use of_address_to_resource()
thermal/drivers/mediatek: Change clk_prepare_enable to devm_clk_get_enabled in mtk_thermal_probe
thermal/drivers/mediatek: Use devm_of_iomap to avoid resource leak in mtk_thermal_probe
thermal/drivers/mediatek: Add temperature constraints to validate read
Revert "thermal/drivers/mediatek: Add delay after thermal banks initialization"
thermal/drivers/cpuidle_cooling: Delete unmatched comments
dt-bindings: thermal: Use generic ADC node name in examples
dt-bindings: imx-thermal: Add imx6sll and imx6ul compatible
|
||
|
Rafael J. Wysocki
|
2e70a47cea |
Merge branches 'acpi-pm' and 'acpi-properties'
Merge an ACPI power management quirk and a change related to the handling of ACPI device properties for 6.4-rc1: - Do not turn off unused power resources during initialization on the Toshiba Click Mini (Hans de Goede). - Support strings in device properties supplied by ACPI _DSM on Apple platforms (Hector Martin). * acpi-pm: ACPI: PM: Do not turn of unused power resources on the Toshiba Click Mini * acpi-properties: ACPI: property: Support strings in Apple _DSM props |
||
|
Linus Torvalds
|
cec24b8b6b |
Char/Misc drivers for 6.4-rc1
Here is the "big" set of char/misc and other driver subsystems for 6.4-rc1. It's pretty big, but due to the removal of pcmcia drivers, almost breaks even for number of lines added vs. removed, a nice change. Included in here are: - removal of unused PCMCIA drivers (finally!) - Interconnect driver updates and additions - Lots of IIO driver updates and additions - MHI driver updates - Coresight driver updates - NVMEM driver updates, which required some OF updates - W1 driver updates and a new maintainer to manage the subsystem - FPGA driver updates - New driver subsystem, CDX, for AMD systems - lots of other small driver updates and additions All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp5Eg8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynSXgCg0kSw3vUYwpsnhAsQkoPw1QVA23sAn2edRCMa GEkPWjrROueCom7xbLMu =eR+P -----END PGP SIGNATURE----- Merge tag 'char-misc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc drivers updates from Greg KH: "Here is the "big" set of char/misc and other driver subsystems for 6.4-rc1. It's pretty big, but due to the removal of pcmcia drivers, almost breaks even for number of lines added vs. removed, a nice change. Included in here are: - removal of unused PCMCIA drivers (finally!) - Interconnect driver updates and additions - Lots of IIO driver updates and additions - MHI driver updates - Coresight driver updates - NVMEM driver updates, which required some OF updates - W1 driver updates and a new maintainer to manage the subsystem - FPGA driver updates - New driver subsystem, CDX, for AMD systems - lots of other small driver updates and additions All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (196 commits) mcb-lpc: Reallocate memory region to avoid memory overlapping mcb-pci: Reallocate memory region to avoid memory overlapping mcb: Return actual parsed size when reading chameleon table kernel/configs: Drop Android config fragments virt: acrn: Replace obsolete memalign() with posix_memalign() spmi: Add a check for remove callback when removing a SPMI driver spmi: fix W=1 kernel-doc warnings spmi: mtk-pmif: Drop of_match_ptr for ID table spmi: pmic-arb: Convert to platform remove callback returning void spmi: mtk-pmif: Convert to platform remove callback returning void spmi: hisi-spmi-controller: Convert to platform remove callback returning void w1: gpio: remove unnecessary ENOMEM messages w1: omap-hdq: remove unnecessary ENOMEM messages w1: omap-hdq: add SPDX tag w1: omap-hdq: allow compile testing w1: matrox: remove unnecessary ENOMEM messages w1: matrox: use inline over __inline__ w1: matrox: switch from asm to linux header w1: ds2482: do not use assignment in if condition w1: ds2482: drop unnecessary header ... |
||
|
Linus Torvalds
|
556eb8b791 |
Driver core changes for 6.4-rc1
Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5 LEGadNS38k5fs+73UaxV =7K4B -----END PGP SIGNATURE----- Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits) device property: make device_property functions take const device * driver core: update comments in device_rename() driver core: Don't require dynamic_debug for initcall_debug probe timing firmware_loader: rework crypto dependencies firmware_loader: Strip off \n from customized path zram: fix up permission for the hot_add sysfs file cacheinfo: Add use_arch[|_cache]_info field/function arch_topology: Remove early cacheinfo error message if -ENOENT cacheinfo: Check cache properties are present in DT cacheinfo: Check sib_leaf in cache_leaves_are_shared() cacheinfo: Allow early level detection when DT/ACPI info is missing/broken cacheinfo: Add arm64 early level initializer implementation cacheinfo: Add arch specific early level initializer tty: make tty_class a static const structure driver core: class: remove struct class_interface * from callbacks driver core: class: mark the struct class in struct class_interface constant driver core: class: make class_register() take a const * driver core: class: mark class_release() as taking a const * driver core: remove incorrect comment for device_create* MIPS: vpe-cmp: remove module owner pointer from struct class usage. ... |
||
|
Daniel Lezcano
|
a4b81715a5 |
ACPI: thermal: Move to dedicated function sysfs extra attr creation
The ACPI thermal driver creates extra sysfs attributes in its own directory pointing to the thermal zone it is related to and add a pointer to the sysfs ACPI thermal device from the thermal zone sysfs entry. This is very specific to this ACPI thermal driver, let's encapsulate the related creation/deletion code to group it inside a function we can identify later for removal if needed. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> [ rjw: Subject adjustment, removal of trailing white space ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Daniel Lezcano
|
66d39e74bf |
ACPI: thermal: Use thermal_zone_device()
In order to get the device associated with the thermal zone, let's use the wrapper thermal_zone_device() instead of accessing directly the content of the thermal zone device structure. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> [ rjw: Subject adjustment, removal of trailing white space ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Hector Martin
|
9bde7fb894 |
ACPI: property: Support strings in Apple _DSM props
The Wi-Fi module in x86 Apple machines has a "module-instance" device property that specifies the platform type and is used for firmware selection. Its value is a string, so add support for string values in acpi_extract_apple_properties(). Reviewed-by: Lukas Wunner <lukas@wunner.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Marius Hoch
|
61711941d8 |
ACPI: x86: utils: Remove Lenovo Yoga Tablet 2's MAGN0001
The LSM303D on the Lenovo Yoga Tablet 2 series is present as both ACCL0001 and MAGN0001. As we can only ever register an i2c client for one of them, ignore MAGN0001. Currently this errors: i2c i2c-4: Failed to register i2c client MAGN0001:00 at 0x1d (-16) Tested on a Lenovo Yoga Tablet 2 1051-F. Signed-off-by: Marius Hoch <mail@mariushoch.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Hans de Goede
|
9b04d99788 |
ACPI: PM: Do not turn of unused power resources on the Toshiba Click Mini
The CPR3 power resource on the Toshiba Click Mini toggles a GPIO which is called SISP (for SIS touchscreen power?) on/off. This CPR3 power resource is not listed in any _PR? lists, let alone in a _PR0 list for the SIS0817 touchscreen ACPI device which needs it. Before commit |
||
|
Linus Torvalds
|
0cfd8703e7 |
Power management updates for 6.4-rc1
- Fix the frequency unit in cpufreq_verify_current_freq checks()
(Sanjay Chandrashekara).
- Make mode_state_machine in amd-pstate static (Tom Rix).
- Make the cpufreq core require drivers with target_index() to set
freq_table (Viresh Kumar).
- Fix typo in the ARM_BRCMSTB_AVS_CPUFREQ Kconfig entry (Jingyu Wang).
- Use of_property_read_bool() for boolean properties in the pmac32
cpufreq driver (Rob Herring).
- Make the cpufreq sysfs interface return proper error codes on
obviously invalid input (qinyu).
- Add guided autonomous mode support to the AMD P-state driver (Wyes
Karny).
- Make the Intel P-state driver enable HWP IO boost on all server
platforms (Srinivas Pandruvada).
- Add opp and bandwidth support to tegra194 cpufreq driver (Sumit
Gupta).
- Use of_property_present() for testing DT property presence (Rob
Herring).
- Remove MODULE_LICENSE in non-modules (Nick Alcock).
- Add SM7225 to cpufreq-dt-platdev blocklist (Luca Weiss).
- Optimizations and fixes for qcom-cpufreq-hw driver (Krzysztof
Kozlowski, Konrad Dybcio, and Bjorn Andersson).
- DT binding updates for qcom-cpufreq-hw driver (Konrad Dybcio and
Bartosz Golaszewski).
- Updates and fixes for mediatek driver (Jia-Wei Chang and
AngeloGioacchino Del Regno).
- Use of_property_present() for testing DT property presence in the
cpuidle code (Rob Herring).
- Drop unnecessary (void *) conversions from the PM core (Li zeming).
- Add sysfs files to represent time spent in a platform sleep state
during suspend-to-idle and make AMD and Intel PMC drivers use them
(Mario Limonciello).
- Use of_property_present() for testing DT property presence (Rob
Herring).
- Add set_required_opps() callback to the 'struct opp_table', to make
the code paths cleaner (Viresh Kumar).
- Update the pm-graph siute of utilities to v5.11 with the following
changes:
* New script which allows users to install the latest pm-graph
from the upstream github repo.
* Update all the dmesg suspend/resume PM print formats to be able to
process recent timelines using dmesg only.
* Add ethtool output to the log for the system's ethernet device if
ethtool exists.
* Make the tool more robustly handle events where mangled dmesg or
ftrace outputs do not include all the requisite data.
- Make the sleepgraph utility recognize "CPU killed" messages (Xueqin
Luo).
- Remove unneeded SRCU selection in Kconfig because it's always set
from devfreq core (Paul E. McKenney).
- Drop of_match_ptr() macro from exynos-bus.c because this driver is
always using the DT table for driver probe (Krzysztof Kozlowski).
- Use the preferred of_property_present() instead of the low-level
of_get_property() on exynos-bus.c (Rob Herring).
- Use devm_platform_get_and_ioream_resource() in exyno-ppmu.c (Yang Li).
-----BEGIN PGP SIGNATURE-----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=p/5G
-----END PGP SIGNATURE-----
Merge tag 'pm-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These update several cpufreq drivers and the cpufreq core, add sysfs
interface for exposing the time really spent in the platform low-power
state during suspend-to-idle, update devfreq (core and drivers) and
the pm-graph suite of tools and clean up code.
Specifics:
- Fix the frequency unit in cpufreq_verify_current_freq checks()
Sanjay Chandrashekara)
- Make mode_state_machine in amd-pstate static (Tom Rix)
- Make the cpufreq core require drivers with target_index() to set
freq_table (Viresh Kumar)
- Fix typo in the ARM_BRCMSTB_AVS_CPUFREQ Kconfig entry (Jingyu Wang)
- Use of_property_read_bool() for boolean properties in the pmac32
cpufreq driver (Rob Herring)
- Make the cpufreq sysfs interface return proper error codes on
obviously invalid input (qinyu)
- Add guided autonomous mode support to the AMD P-state driver (Wyes
Karny)
- Make the Intel P-state driver enable HWP IO boost on all server
platforms (Srinivas Pandruvada)
- Add opp and bandwidth support to tegra194 cpufreq driver (Sumit
Gupta)
- Use of_property_present() for testing DT property presence (Rob
Herring)
- Remove MODULE_LICENSE in non-modules (Nick Alcock)
- Add SM7225 to cpufreq-dt-platdev blocklist (Luca Weiss)
- Optimizations and fixes for qcom-cpufreq-hw driver (Krzysztof
Kozlowski, Konrad Dybcio, and Bjorn Andersson)
- DT binding updates for qcom-cpufreq-hw driver (Konrad Dybcio and
Bartosz Golaszewski)
- Updates and fixes for mediatek driver (Jia-Wei Chang and
AngeloGioacchino Del Regno)
- Use of_property_present() for testing DT property presence in the
cpuidle code (Rob Herring)
- Drop unnecessary (void *) conversions from the PM core (Li zeming)
- Add sysfs files to represent time spent in a platform sleep state
during suspend-to-idle and make AMD and Intel PMC drivers use them
Mario Limonciello)
- Use of_property_present() for testing DT property presence (Rob
Herring)
- Add set_required_opps() callback to the 'struct opp_table', to make
the code paths cleaner (Viresh Kumar)
- Update the pm-graph siute of utilities to v5.11 with the following
changes:
* New script which allows users to install the latest pm-graph
from the upstream github repo.
* Update all the dmesg suspend/resume PM print formats to be able
to process recent timelines using dmesg only.
* Add ethtool output to the log for the system's ethernet device
if ethtool exists.
* Make the tool more robustly handle events where mangled dmesg
or ftrace outputs do not include all the requisite data.
- Make the sleepgraph utility recognize "CPU killed" messages (Xueqin
Luo)
- Remove unneeded SRCU selection in Kconfig because it's always set
from devfreq core (Paul E. McKenney)
- Drop of_match_ptr() macro from exynos-bus.c because this driver is
always using the DT table for driver probe (Krzysztof Kozlowski)
- Use the preferred of_property_present() instead of the low-level
of_get_property() on exynos-bus.c (Rob Herring)
- Use devm_platform_get_and_ioream_resource() in exyno-ppmu.c (Yang
Li)"
* tag 'pm-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (44 commits)
platform/x86/intel/pmc: core: Report duration of time in HW sleep state
platform/x86/intel/pmc: core: Always capture counters on suspend
platform/x86/amd: pmc: Report duration of time in hw sleep state
PM: Add sysfs files to represent time spent in hardware sleep state
cpufreq: use correct unit when verify cur freq
cpufreq: tegra194: add OPP support and set bandwidth
cpufreq: amd-pstate: Make varaiable mode_state_machine static
PM: core: Remove unnecessary (void *) conversions
cpufreq: drivers with target_index() must set freq_table
PM / devfreq: exynos-ppmu: Use devm_platform_get_and_ioremap_resource()
OPP: Move required opps configuration to specialized callback
OPP: Handle all genpd cases together in _set_required_opps()
cpufreq: qcom-cpufreq-hw: Revert adding cpufreq qos
dt-bindings: cpufreq: cpufreq-qcom-hw: Add QCM2290
dt-bindings: cpufreq: cpufreq-qcom-hw: Sanitize data per compatible
dt-bindings: cpufreq: cpufreq-qcom-hw: Allow just 1 frequency domain
cpufreq: Add SM7225 to cpufreq-dt-platdev blocklist
cpufreq: qcom-cpufreq-hw: fix double IO unmap and resource release on exit
cpufreq: mediatek: Raise proc and sram max voltage for MT7622/7623
cpufreq: mediatek: raise proc/sram max voltage for MT8516
...
|
||
|
Linus Torvalds
|
793582ff47 |
ACPI updates for 6.4-rc1
- Update the ACPICA code in the kernel to upstream revision 20230331
including the following changes:
* Delete bogus node_array array of pointers from AEST table (Jessica
Clarke).
* Add support for trace buffer extension in GICC to the ACPI MADT
parser (Xiongfeng Wang).
* Add missing macro ACPI_FUNCTION_TRACE() for acpi_ns_repair_HID()
(Xiongfeng Wang).
* Add missing tables to astable (Pedro Falcato).
* Add support for 64 bit loong_arch compilation to ACPICA (Huacai
Chen).
* Add support for ASPT table in disassembler to ACPICA (Jeremi
Piotrowski).
* Add support for Arm's MPAM ACPI table version 2 (Hesham Almatary).
* Update all copyrights/signons in ACPICA to 2023 (Bob Moore).
* Add support for ClockInput resource (v6.5) (Niyas Sait).
* Add RISC-V INTC interrupt controller definition to the list of
supported interrupt controllers for MADT (Sunil V L).
* Add structure definitions for the RISC-V RHCT ACPI table (Sunil V L).
* Address several cases in which the ACPICA code might lead to
undefined behavior (Tamir Duberstein).
* Make ACPICA code support flexible arrays properly (Kees Cook).
* Check null return of ACPI_ALLOCATE_ZEROED in
acpi_db_display_objects() (void0red).
* Add os specific support for Zephyr RTOS to ACPICA (Najumon).
* Update version to 20230331 (Bob Moore).
- Fix evaluating the _PDC ACPI control method when running as Xen
dom0 (Roger Pau Monne).
- Use platform devices to load ACPI PPC and PCC drivers (Petr Pavlu).
- Check for null return of devm_kzalloc() in fch_misc_setup() (Kang
Chen).
- Log a message if enable_irq_wake() fails for the ACPI SCI (Simon
Gaiser).
- Initialize the correct IOMMU fwspec while parsing ACPI VIOT
(Jean-Philippe Brucker).
- Amend indentation and prefix error messages with FW_BUG in the ACPI
SPCR parsing code (Andy Shevchenko).
- Enable ACPI sysfs support for CCEL records (Kuppuswamy
Sathyanarayanan).
- Make the APEI error injection code warn on invalid arguments when
explicitly indicated by platform (Shuai Xue).
- Add CXL error types to the error injection code in APEI (Tony Luck).
- Refactor acpi_data_prop_read_single() (Andy Shevchenko).
- Fix two issues in the ACPI SBS driver (Armin Wolf).
- Replace ternary operator with min_t() in the generic ACPI thermal
zone driver (Jiangshan Yi).
- Ensure that ACPI notify handlers are not running after removal and
clean up code in acpi_sb_notify() (Rafael Wysocki).
- Remove register_backlight_delay module option and code and remove
quirks for false-positive backlight control support advertised on
desktop boards (Hans de Goede).
- Replace irqdomain.h include with struct declarations in ACPI headers
and update several pieces of code previously including of.h
implicitly through those headers (Rob Herring).
- Fix acpi_evaluate_dsm_typed() redefinition error (Kiran K).
- Update the pm_profile sysfs attribute documentation (Rafael Wysocki).
- Add 80862289 ACPI _HID for second PWM controller on Cherry Trail to
the ACPI driver for Intel SoCs (Hans de Goede).
-----BEGIN PGP SIGNATURE-----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=O61K
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to upstream revision
20230331, fix the ACPI SBS driver and the evaluation of the _PDC
method on Xen dom0 in the ACPI processor driver, update the ACPI
driver for Intel SoCs and clean up code in multiple places.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20230331
including the following changes:
* Delete bogus node_array array of pointers from AEST table
(Jessica Clarke)
* Add support for trace buffer extension in GICC to the ACPI MADT
parser (Xiongfeng Wang)
* Add missing macro ACPI_FUNCTION_TRACE() for
acpi_ns_repair_HID() (Xiongfeng Wang)
* Add missing tables to astable (Pedro Falcato)
* Add support for 64 bit loong_arch compilation to ACPICA (Huacai
Chen)
* Add support for ASPT table in disassembler to ACPICA (Jeremi
Piotrowski)
* Add support for Arm's MPAM ACPI table version 2 (Hesham
Almatary)
* Update all copyrights/signons in ACPICA to 2023 (Bob Moore)
* Add support for ClockInput resource (v6.5) (Niyas Sait)
* Add RISC-V INTC interrupt controller definition to the list of
supported interrupt controllers for MADT (Sunil V L)
* Add structure definitions for the RISC-V RHCT ACPI table (Sunil
V L)
* Address several cases in which the ACPICA code might lead to
undefined behavior (Tamir Duberstein)
* Make ACPICA code support flexible arrays properly (Kees Cook)
* Check null return of ACPI_ALLOCATE_ZEROED in
acpi_db_display_objects() (void0red)
* Add os specific support for Zephyr RTOS to ACPICA (Najumon)
* Update version to 20230331 (Bob Moore)
- Fix evaluating the _PDC ACPI control method when running as Xen
dom0 (Roger Pau Monne)
- Use platform devices to load ACPI PPC and PCC drivers (Petr Pavlu)
- Check for null return of devm_kzalloc() in fch_misc_setup() (Kang
Chen)
- Log a message if enable_irq_wake() fails for the ACPI SCI (Simon
Gaiser)
- Initialize the correct IOMMU fwspec while parsing ACPI VIOT
(Jean-Philippe Brucker)
- Amend indentation and prefix error messages with FW_BUG in the ACPI
SPCR parsing code (Andy Shevchenko)
- Enable ACPI sysfs support for CCEL records (Kuppuswamy
Sathyanarayanan)
- Make the APEI error injection code warn on invalid arguments when
explicitly indicated by platform (Shuai Xue)
- Add CXL error types to the error injection code in APEI (Tony Luck)
- Refactor acpi_data_prop_read_single() (Andy Shevchenko)
- Fix two issues in the ACPI SBS driver (Armin Wolf)
- Replace ternary operator with min_t() in the generic ACPI thermal
zone driver (Jiangshan Yi)
- Ensure that ACPI notify handlers are not running after removal and
clean up code in acpi_sb_notify() (Rafael Wysocki)
- Remove register_backlight_delay module option and code and remove
quirks for false-positive backlight control support advertised on
desktop boards (Hans de Goede)
- Replace irqdomain.h include with struct declarations in ACPI
headers and update several pieces of code previously including of.h
implicitly through those headers (Rob Herring)
- Fix acpi_evaluate_dsm_typed() redefinition error (Kiran K)
- Update the pm_profile sysfs attribute documentation (Rafael
Wysocki)
- Add 80862289 ACPI _HID for second PWM controller on Cherry Trail to
the ACPI driver for Intel SoCs (Hans de Goede)"
* tag 'acpi-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
ACPI: LPSS: Add 80862289 ACPI _HID for second PWM controller on Cherry Trail
ACPI: bus: Ensure that notify handlers are not running after removal
ACPI: bus: Add missing braces to acpi_sb_notify()
ACPI: video: Remove desktops without backlight DMI quirks
ACPI: video: Remove register_backlight_delay module option and code
ACPI: Replace irqdomain.h include with struct declarations
fpga: lattice-sysconfig-spi: Add explicit include for of.h
tpm: atmel: Add explicit include for of.h
virtio-mmio: Add explicit include for of.h
pata: ixp4xx: Add explicit include for of.h
ata: pata_macio: Add explicit include of irqdomain.h
serial: 8250_tegra: Add explicit include for of.h
net: rfkill-gpio: Add explicit include for of.h
staging: iio: resolver: ad2s1210: Add explicit include for of.h
iio: adc: ad7292: Add explicit include for of.h
ACPICA: Update version to 20230331
ACPICA: add os specific support for Zephyr RTOS
ACPICA: ACPICA: check null return of ACPI_ALLOCATE_ZEROED in acpi_db_display_objects
ACPICA: acpi_resource_irq: Replace 1-element arrays with flexible array
ACPICA: acpi_madt_oem_data: Fix flexible array member definition
...
|
||
|
Linus Torvalds
|
5e0ca0bfc3 |
Thermal control updates for 6.4-rc1
- Add a thermal zone 'devdata' accessor and modify several drivers to
use it (Daniel Lezcano).
- Prevent drivers from using the 'device' internal thermal zone
structure field directly (Daniel Lezcano).
- Clean up the hwmon thermal driver (Daniel Lezcano).
- Add thermal zone id accessor and thermal zone type accessor
and prevent drivers from using thermal zone fields directly (Daniel
Lezcano).
- Clean up the acerhdf and tegra thermal drivers (Daniel Lezcano).
- Add lower bound check for sysfs input to the x86_pkg_temp_thermal
Intel thermal driver (Zhang Rui).
- Add more thermal zone device encapsulation: prevent setting structure
field directly, access the sensor device instead the thermal zone's
device for trace, relocate the traces in drivers/thermal (Daniel
Lezcano).
- Use the generic trip point for the i.MX and remove the get_trip_temp
ops (Daniel Lezcano).
- Use the devm_platform_ioremap_resource() in the Hisilicon driver
(Yang Li).
- Remove R-Car H3 ES1.* handling as public has only access to the ES2
version and the upstream support for the ES1 has been shutdown (Wolfram
Sang).
- Add a delay after initializing the bank in order to let the time to
the hardware to initialze itself before reading the temperature
(Amjad Ouled-Ameur).
- Add MT8365 support (Amjad Ouled-Ameur).
- Preparational cleanup and DT bindings for RK3588 support (Sebastian
Reichel).
- Add driver support for RK3588 (Finley Xiao).
- Use devm_reset_control_array_get_exclusive() for the Rockchip driver
(Ye Xingchen).
- Detect power gated thermal zones and return -EAGAIN when reading the
temperature (Mikko Perttunen).
- Remove thermal_bind_params structure as it is unused (Zhang Rui)
- Drop unneeded quotes in DT bindings allowing to run yamllint (Rob
Herring).
- Update the power allocator documentation according to the thermal
trace relocation (Lukas Bulwahn).
- Fix sensor 1 interrupt status bitmask for the Mediatek LVTS sensor
(Chen-Yu Tsai).
- Use the dev_err_probe() helper in the Amlogic driver (Ye Xingchen).
- Add AP domain support to LVTS thermal controllers for mt8195
(Balsam CHIHI).
- Remove buggy call to thermal_of_zone_unregister() (Daniel Lezcano).
- Make thermal_of_zone_[un]register() private to the thermal OF code
(Daniel Lezcano).
- Create a private copy of the thermal zone device parameters
structure when registering a thermal zone (Daniel Lezcano).
- Fix a kernel NULL pointer dereference in thermal_hwmon (Zhang Rui).
- Revert recent message adjustment in thermal_hwmon (Rafael Wysocki).
- Use of_property_present() for testing DT property presence in
thermal control code (Rob Herring).
- Clean up thermal_list_lock locking in the thermal core (Rafael
Wysocki).
- Add DLVR support for RFIM control in the int340x Intel thermal
driver (Srinivas Pandruvada).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmRGvsYSHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxekAQAJ/hhUZyY2hcFveNfrutkO8OGY+/rtz8
ozMxyfwAdHoD6/zg9zZQTHSQy3W9rx2FC3tYtwHlJopDYFQuNPsfrhYE97EfO9uT
Baou3OhoXV+ZJ0EZqIuTNuLaDPD/Hg8KSNmZvb6p/30bLR3Y/gKZutX9+S0x8qpG
y7JcA8qPDYTvNfxkDjYv3M7HlfpwIwpi/xPFuw9nI2Fdw0SYRWpHAQlNj6oaF0xT
EaNIg5zh4rR81T34/DpaOm1mfrg3Lg9xOJMU0laS5sKkn5Ea8s0E5s3vb5Quup61
eXL3DhxmsIv51+1URZMZIQo2FmogvLmgnIPQyaeSvtlic0t39YS70tL2i8JY6kfL
Tkhm8bS8jKQ6Y8GUvUbE/qadWFgkV4/lFTREVkKuq0XUU/YEpl5iQJAc0iEa0soy
SISucs/ugoFjqdlN1pNDv7mLIzqyYIF6tZekLZTVa1U++MHKRakY9folD3brc6xO
ewp1yO6e/fYZJx0K8LNlBRzXqNuV1Tl+kBDvUNHDNAEN8jONiZ2v+pDQ+VqYYxIc
1A2KVw0l3m0MQ97w3E8LqYJTH6f8bxSLxjXnHLSN0eAXJkn10olfz/RYNsqi+dUb
YBnFU8t3plGMVGrDcoDtO6hkujUw3oF7pibWeXXFEvIyRUcOA2e94kd57i9a1zLS
5yyH9UchFcQq
=XNJE
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These mostly continue to prepare the thermal control subsystem for
using unified representation of trip points, which includes cleanups,
code refactoring and similar and update several drivers (for other
reasons), which includes new hardware support.
Specifics:
- Add a thermal zone 'devdata' accessor and modify several drivers to
use it (Daniel Lezcano)
- Prevent drivers from using the 'device' internal thermal zone
structure field directly (Daniel Lezcano)
- Clean up the hwmon thermal driver (Daniel Lezcano)
- Add thermal zone id accessor and thermal zone type accessor and
prevent drivers from using thermal zone fields directly (Daniel
Lezcano)
- Clean up the acerhdf and tegra thermal drivers (Daniel Lezcano)
- Add lower bound check for sysfs input to the x86_pkg_temp_thermal
Intel thermal driver (Zhang Rui)
- Add more thermal zone device encapsulation: prevent setting
structure field directly, access the sensor device instead the
thermal zone's device for trace, relocate the traces in
drivers/thermal (Daniel Lezcano)
- Use the generic trip point for the i.MX and remove the
get_trip_temp ops (Daniel Lezcano)
- Use the devm_platform_ioremap_resource() in the Hisilicon driver
(Yang Li)
- Remove R-Car H3 ES1.* handling as public has only access to the ES2
version and the upstream support for the ES1 has been shutdown
(Wolfram Sang)
- Add a delay after initializing the bank in order to let the time to
the hardware to initialze itself before reading the temperature
(Amjad Ouled-Ameur)
- Add MT8365 support (Amjad Ouled-Ameur)
- Preparational cleanup and DT bindings for RK3588 support (Sebastian
Reichel)
- Add driver support for RK3588 (Finley Xiao)
- Use devm_reset_control_array_get_exclusive() for the Rockchip
driver (Ye Xingchen)
- Detect power gated thermal zones and return -EAGAIN when reading
the temperature (Mikko Perttunen)
- Remove thermal_bind_params structure as it is unused (Zhang Rui)
- Drop unneeded quotes in DT bindings allowing to run yamllint (Rob
Herring)
- Update the power allocator documentation according to the thermal
trace relocation (Lukas Bulwahn)
- Fix sensor 1 interrupt status bitmask for the Mediatek LVTS sensor
(Chen-Yu Tsai)
- Use the dev_err_probe() helper in the Amlogic driver (Ye Xingchen)
- Add AP domain support to LVTS thermal controllers for mt8195
(Balsam CHIHI)
- Remove buggy call to thermal_of_zone_unregister() (Daniel Lezcano)
- Make thermal_of_zone_[un]register() private to the thermal OF code
(Daniel Lezcano)
- Create a private copy of the thermal zone device parameters
structure when registering a thermal zone (Daniel Lezcano)
- Fix a kernel NULL pointer dereference in thermal_hwmon (Zhang Rui)
- Revert recent message adjustment in thermal_hwmon (Rafael Wysocki)
- Use of_property_present() for testing DT property presence in
thermal control code (Rob Herring)
- Clean up thermal_list_lock locking in the thermal core (Rafael
Wysocki)
- Add DLVR support for RFIM control in the int340x Intel thermal
driver (Srinivas Pandruvada)"
* tag 'thermal-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (55 commits)
thermal: intel: int340x: Add DLVR support for RFIM control
thermal/core: Alloc-copy-free the thermal zone parameters structure
thermal/of: Unexport unused OF functions
thermal/drivers/bcm2835: Remove buggy call to thermal_of_zone_unregister
thermal/drivers/mediatek/lvts_thermal: Add AP domain for mt8195
dt-bindings: thermal: mediatek: Add AP domain to LVTS thermal controllers for mt8195
thermal: amlogic: Use dev_err_probe()
thermal/drivers/mediatek/lvts_thermal: Fix sensor 1 interrupt status bitmask
MAINTAINERS: adjust entry in THERMAL/POWER_ALLOCATOR after header movement
dt-bindings: thermal: Drop unneeded quotes
thermal/core: Remove thermal_bind_params structure
thermal/drivers/tegra-bpmp: Handle offline zones
thermal/drivers/rockchip: use devm_reset_control_array_get_exclusive()
dt-bindings: rockchip-thermal: Support the RK3588 SoC compatible
thermal/drivers/rockchip: Support RK3588 SoC in the thermal driver
thermal/drivers/rockchip: Support dynamic sized sensor array
thermal/drivers/rockchip: Simplify channel id logic
thermal/drivers/rockchip: Use dev_err_probe
thermal/drivers/rockchip: Simplify clock logic
thermal/drivers/rockchip: Simplify getting match data
...
|
||
|
Linus Torvalds
|
df45da57cb |
arm64 updates for 6.4
ACPI: * Improve error reporting when failing to manage SDEI on AGDI device removal Assembly routines: * Improve register constraints so that the compiler can make use of the zero register instead of moving an immediate #0 into a GPR * Allow the compiler to allocate the registers used for CAS instructions CPU features and system registers: * Cleanups to the way in which CPU features are identified from the ID register fields * Extend system register definition generation to handle Enum types when defining shared register fields * Generate definitions for new _EL2 registers and add new fields for ID_AA64PFR1_EL1 * Allow SVE to be disabled separately from SME on the kernel command-line Tracing: * Support for "direct calls" in ftrace, which enables BPF tracing for arm64 Kdump: * Don't bother unmapping the crashkernel from the linear mapping, which then allows us to use huge (block) mappings and reduce TLB pressure when a crashkernel is loaded. Memory management: * Try again to remove data cache invalidation from the coherent DMA allocation path * Simplify the fixmap code by mapping at page granularity * Allow the kfence pool to be allocated early, preventing the rest of the linear mapping from being forced to page granularity Perf and PMU: * Move CPU PMU code out to drivers/perf/ where it can be reused by the 32-bit ARM architecture when running on ARMv8 CPUs * Fix race between CPU PMU probing and pKVM host de-privilege * Add support for Apple M2 CPU PMU * Adjust the generic PERF_COUNT_HW_BRANCH_INSTRUCTIONS event dynamically, depending on what the CPU actually supports * Minor fixes and cleanups to system PMU drivers Stack tracing: * Use the XPACLRI instruction to strip PAC from pointers, rather than rolling our own function in C * Remove redundant PAC removal for toolchains that handle this in their builtins * Make backtracing more resilient in the face of instrumentation Miscellaneous: * Fix single-step with KGDB * Remove harmless warning when 'nokaslr' is passed on the kernel command-line * Minor fixes and cleanups across the board -----BEGIN PGP SIGNATURE----- iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmRChcwQHHdpbGxAa2Vy bmVsLm9yZwAKCRC3rHDchMFjNCgBCADFvkYY9ESztSnd3EpiMbbAzgRCQBiA5H7U F2Wc+hIWgeAeUEttSH22+F16r6Jb0gbaDvsuhtN2W/rwQhKNbCU0MaUME05MPmg2 AOp+RZb2vdT5i5S5dC6ZM6G3T6u9O78LBWv2JWBdd6RIybamEn+RL00ep2WAduH7 n1FgTbsKgnbScD2qd4K1ejZ1W/BQMwYulkNpyTsmCIijXM12lkzFlxWnMtky3uhR POpawcIZzXvWI02QAX+SIdynGChQV3VP+dh9GuFbt7ASigDEhgunvfUYhZNSaqf4 +/q0O8toCtmQJBUhF0DEDSB5T8SOz5v9CKxKuwfaX6Trq0ixFQpZ =78L9 -----END PGP SIGNATURE----- Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "ACPI: - Improve error reporting when failing to manage SDEI on AGDI device removal Assembly routines: - Improve register constraints so that the compiler can make use of the zero register instead of moving an immediate #0 into a GPR - Allow the compiler to allocate the registers used for CAS instructions CPU features and system registers: - Cleanups to the way in which CPU features are identified from the ID register fields - Extend system register definition generation to handle Enum types when defining shared register fields - Generate definitions for new _EL2 registers and add new fields for ID_AA64PFR1_EL1 - Allow SVE to be disabled separately from SME on the kernel command-line Tracing: - Support for "direct calls" in ftrace, which enables BPF tracing for arm64 Kdump: - Don't bother unmapping the crashkernel from the linear mapping, which then allows us to use huge (block) mappings and reduce TLB pressure when a crashkernel is loaded. Memory management: - Try again to remove data cache invalidation from the coherent DMA allocation path - Simplify the fixmap code by mapping at page granularity - Allow the kfence pool to be allocated early, preventing the rest of the linear mapping from being forced to page granularity Perf and PMU: - Move CPU PMU code out to drivers/perf/ where it can be reused by the 32-bit ARM architecture when running on ARMv8 CPUs - Fix race between CPU PMU probing and pKVM host de-privilege - Add support for Apple M2 CPU PMU - Adjust the generic PERF_COUNT_HW_BRANCH_INSTRUCTIONS event dynamically, depending on what the CPU actually supports - Minor fixes and cleanups to system PMU drivers Stack tracing: - Use the XPACLRI instruction to strip PAC from pointers, rather than rolling our own function in C - Remove redundant PAC removal for toolchains that handle this in their builtins - Make backtracing more resilient in the face of instrumentation Miscellaneous: - Fix single-step with KGDB - Remove harmless warning when 'nokaslr' is passed on the kernel command-line - Minor fixes and cleanups across the board" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (72 commits) KVM: arm64: Ensure CPU PMU probes before pKVM host de-privilege arm64: kexec: include reboot.h arm64: delete dead code in this_cpu_set_vectors() arm64/cpufeature: Use helper macro to specify ID register for capabilites drivers/perf: hisi: add NULL check for name drivers/perf: hisi: Remove redundant initialized of pmu->name arm64/cpufeature: Consistently use symbolic constants for min_field_value arm64/cpufeature: Pull out helper for CPUID register definitions arm64/sysreg: Convert HFGITR_EL2 to automatic generation ACPI: AGDI: Improve error reporting for problems during .remove() arm64: kernel: Fix kernel warning when nokaslr is passed to commandline perf/arm-cmn: Fix port detection for CMN-700 arm64: kgdb: Set PSTATE.SS to 1 to re-enable single-step arm64: move PAC masks to <asm/pointer_auth.h> arm64: use XPACLRI to strip PAC arm64: avoid redundant PAC stripping in __builtin_return_address() arm64/sme: Fix some comments of ARM SME arm64/signal: Alloc tpidr2 sigframe after checking system_supports_tpidr2() arm64/signal: Use system_supports_tpidr2() to check TPIDR2 arm64/idreg: Don't disable SME when disabling SVE ... |
||
|
Rafael J. Wysocki
|
640324e3e6 |
Merge branch 'pm-cpufreq'
Merge cpufreq updates for 6.4-rc1: - Fix the frequency unit in cpufreq_verify_current_freq checks() (Sanjay Chandrashekara). - Make mode_state_machine in amd-pstate static (Tom Rix). - Make the cpufreq core require drivers with target_index() to set freq_table (Viresh Kumar). - Fix typo in the ARM_BRCMSTB_AVS_CPUFREQ Kconfig entry (Jingyu Wang). - Use of_property_read_bool() for boolean properties in the pmac32 cpufreq driver (Rob Herring). - Make the cpufreq sysfs interface return proper error codes on obviously invalid input (qinyu). - Add guided autonomous mode support to the AMD P-state driver (Wyes Karny). - Make the Intel P-state driver enable HWP IO boost on all server platforms (Srinivas Pandruvada). - Add opp and bandwidth support to tegra194 cpufreq driver (Sumit Gupta). - Use of_property_present() for testing DT property presence (Rob Herring). - Remove MODULE_LICENSE in non-modules (Nick Alcock). - Add SM7225 to cpufreq-dt-platdev blocklist (Luca Weiss). - Optimizations and fixes for qcom-cpufreq-hw driver (Krzysztof Kozlowski, Konrad Dybcio, and Bjorn Andersson). - DT binding updates for qcom-cpufreq-hw driver (Konrad Dybcio and Bartosz Golaszewski). - Updates and fixes for mediatek driver (Jia-Wei Chang and AngeloGioacchino Del Regno). * pm-cpufreq: (29 commits) cpufreq: use correct unit when verify cur freq cpufreq: tegra194: add OPP support and set bandwidth cpufreq: amd-pstate: Make varaiable mode_state_machine static cpufreq: drivers with target_index() must set freq_table cpufreq: qcom-cpufreq-hw: Revert adding cpufreq qos dt-bindings: cpufreq: cpufreq-qcom-hw: Add QCM2290 dt-bindings: cpufreq: cpufreq-qcom-hw: Sanitize data per compatible dt-bindings: cpufreq: cpufreq-qcom-hw: Allow just 1 frequency domain cpufreq: Add SM7225 to cpufreq-dt-platdev blocklist cpufreq: qcom-cpufreq-hw: fix double IO unmap and resource release on exit cpufreq: mediatek: Raise proc and sram max voltage for MT7622/7623 cpufreq: mediatek: raise proc/sram max voltage for MT8516 cpufreq: mediatek: fix KP caused by handler usage after regulator_put/clk_put cpufreq: mediatek: fix passing zero to 'PTR_ERR' cpufreq: pmac32: Use of_property_read_bool() for boolean properties cpufreq: Fix typo in the ARM_BRCMSTB_AVS_CPUFREQ Kconfig entry cpufreq: warn about invalid vals to scaling_max/min_freq interfaces Documentation: cpufreq: amd-pstate: Update amd_pstate status sysfs for guided cpufreq: amd-pstate: Add guided mode control support via sysfs cpufreq: amd-pstate: Add guided autonomous mode ... |
||
|
Rafael J. Wysocki
|
21fc506cf5 |
Merge branches 'acpi-bus', 'acpi-video' and 'acpi-misc'
Merge ACPI bus type driver changes, ACPI backlight driver updates and a series of cleanups related to of.h for 6.4-rc1: - Ensure that ACPI notify handlers are not running after removal and clean up code in acpi_sb_notify() (Rafael Wysocki). - Remove register_backlight_delay module option and code and remove quirks for false-positive backlight control support advertised on desktop boards (Hans de Goede). - Replace irqdomain.h include with struct declarations in ACPI headers and update several pieces of code previously including of.h implicitly through those headers (Rob Herring). * acpi-bus: ACPI: bus: Ensure that notify handlers are not running after removal ACPI: bus: Add missing braces to acpi_sb_notify() * acpi-video: ACPI: video: Remove desktops without backlight DMI quirks ACPI: video: Remove register_backlight_delay module option and code * acpi-misc: ACPI: Replace irqdomain.h include with struct declarations fpga: lattice-sysconfig-spi: Add explicit include for of.h tpm: atmel: Add explicit include for of.h virtio-mmio: Add explicit include for of.h pata: ixp4xx: Add explicit include for of.h ata: pata_macio: Add explicit include of irqdomain.h serial: 8250_tegra: Add explicit include for of.h net: rfkill-gpio: Add explicit include for of.h staging: iio: resolver: ad2s1210: Add explicit include for of.h iio: adc: ad7292: Add explicit include for of.h |
||
|
Rafael J. Wysocki
|
0f318baaf2 |
Merge branches 'acpi-apei', 'acpi-properties', 'acpi-sbs' and 'acpi-thermal'
Merge ACPI APEI changes, ACPI device properties handling update, ACPI SBS driver fixes and ACPI thermal driver cleanup for 6.4-rc1: - Make the APEI error injection code warn on invalid arguments when explicitly indicated by platform (Shuai Xue). - Add CXL error types to the error injection code in APEI (Tony Luck). - Refactor acpi_data_prop_read_single() (Andy Shevchenko). - Fix two issues in the ACPI SBS driver (Armin Wolf). - Replace ternary operator with min_t() in the generic ACPI thermal zone driver (Jiangshan Yi). * acpi-apei: ACPI: APEI: EINJ: warn on invalid argument when explicitly indicated by platform ACPI: APEI: EINJ: Add CXL error types * acpi-properties: ACPI: property: Refactor acpi_data_prop_read_single() * acpi-sbs: ACPI: SBS: Fix handling of Smart Battery Selectors ACPI: EC: Fix oops when removing custom query handlers ACPI: EC: Limit explicit removal of query handlers to custom query handlers * acpi-thermal: ACPI: thermal: Replace ternary operator with min_t() |
||
|
Rafael J. Wysocki
|
0e83828608 |
Merge branches 'acpi-processor', 'acpi-pm', 'acpi-tables' and 'acpi-sysfs'
Merge ACPI processor driver changes, ACPI power management updates, changes related to parsing ACPI tables and an ACPI sysfs interface update for 6.4-rc1: - Fix evaluating the _PDC ACPI control method when running as Xen dom0 (Roger Pau Monne). - Use platform devices to load ACPI PPC and PCC drivers (Petr Pavlu). - Check for null return of devm_kzalloc() in fch_misc_setup() (Kang Chen). - Log a message if enable_irq_wake() fails for the ACPI SCI (Simon Gaiser). - Initialize the correct IOMMU fwspec while parsing ACPI VIOT (Jean-Philippe Brucker). - Amend indentation and prefix error messages with FW_BUG in the ACPI SPCR parsing code (Andy Shevchenko). - Enable ACPI sysfs support for CCEL records (Kuppuswamy Sathyanarayanan). * acpi-processor: ACPI: processor: Fix evaluating _PDC method when running as Xen dom0 ACPI: cpufreq: Use platform devices to load ACPI PPC and PCC drivers ACPI: processor: Check for null return of devm_kzalloc() in fch_misc_setup() * acpi-pm: ACPI: s2idle: Log when enabling wakeup IRQ fails * acpi-tables: ACPI: VIOT: Initialize the correct IOMMU fwspec ACPI: SPCR: Amend indentation ACPI: SPCR: Prefix error messages with FW_BUG * acpi-sysfs: ACPI: sysfs: Enable ACPI sysfs support for CCEL records |
||
|
Rafael J. Wysocki
|
c90b29cede |
Merge branch 'acpica'
Merge ACPICA material for 6.4-rc1: - Delete bogus node_array array of pointers from AEST table (Jessica Clarke). - Add support for trace buffer extension in GICC to the ACPI MADT parser (Xiongfeng Wang). - Add missing macro ACPI_FUNCTION_TRACE() for acpi_ns_repair_HID() (Xiongfeng Wang). - Add missing tables to astable (Pedro Falcato). - Add support for 64 bit loong_arch compilation to ACPICA (Huacai Chen). - Add support for ASPT table in disassembler to ACPICA (Jeremi Piotrowski). - Add support for Arm's MPAM ACPI table version 2 (Hesham Almatary). - Update all copyrights/signons in ACPICA to 2023 (Bob Moore). - Add support for ClockInput resource (v6.5) (Niyas Sait). - Add RISC-V INTC interrupt controller definition to the list of supported interrupt controllers for MADT (Sunil V L). - Add structure definitions for the RISC-V RHCT ACPI table (Sunil V L). - Address several cases in which the ACPICA code might lead to undefined behavior (Tamir Duberstein). - Make ACPICA code support flexible arrays properly (Kees Cook). - Check null return of ACPI_ALLOCATE_ZEROED in acpi_db_display_objects() (void0red). - Add os specific support for Zephyr RTOS to ACPICA (Najumon). - Update version to 20230331 (Bob Moore). * acpica: (32 commits) ACPICA: Update version to 20230331 ACPICA: add os specific support for Zephyr RTOS ACPICA: ACPICA: check null return of ACPI_ALLOCATE_ZEROED in acpi_db_display_objects ACPICA: acpi_resource_irq: Replace 1-element arrays with flexible array ACPICA: acpi_madt_oem_data: Fix flexible array member definition ACPICA: acpi_dmar_andd: Replace 1-element array with flexible array ACPICA: acpi_pci_routing_table: Replace fixed-size array with flex array member ACPICA: struct acpi_resource_dma: Replace 1-element array with flexible array ACPICA: Introduce ACPI_FLEX_ARRAY ACPICA: struct acpi_nfit_interleave: Replace 1-element array with flexible array ACPICA: actbl2: Replace 1-element arrays with flexible arrays ACPICA: actbl1: Replace 1-element arrays with flexible arrays ACPICA: struct acpi_resource_vendor: Replace 1-element array with flexible array ACPICA: Avoid undefined behavior: load of misaligned address ACPICA: Avoid undefined behavior: member access within misaligned address ACPICA: Avoid undefined behavior: member access within misaligned address ACPICA: Avoid undefined behavior: member access within misaligned address ACPICA: Avoid undefined behavior: member access within misaligned address ACPICA: Avoid undefined behavior: member access within null pointer ACPICA: Avoid undefined behavior: applying zero offset to null pointer ... |
||
|
Linus Torvalds
|
8e41e0a575 |
Revert "ACPICA: Events: Support fixed PCIe wake event"
This reverts commit
|
||
|
Hans de Goede
|
03c57b0160 |
ACPI: LPSS: Add 80862289 ACPI _HID for second PWM controller on Cherry Trail
On some Cherry Trail devices the second PWM controller uses 80862289 as ACPI _HID, rather then using 80862288 as is done for both controllers on most models. Add the missing 80862289 ACPI _HID, note this uses its own lpss_device_desc, without ".setup = bsw_pwm_setup" so that the pwm_lookup is not added for it. On devices where both controllers use the 80862288 _HID bsw_pwm_setup() does a UID check to avoid registering the lookup for the second controller but that will not work here. Adding the missing id fixes the second PWM controller no longer working after the entire LPSS1 island has been in D3 at least once, which causes the contents of the LPSS private registers to get lost. Adding the _HID makes acpi_lpss restore these when the controller moves from D3 to D0. Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Rafael J. Wysocki
|
faae443738 |
ACPI: bus: Ensure that notify handlers are not running after removal
Currently, acpi_device_remove_notify_handler() may return while the
notify handler being removed is still running which may allow the
module holding that handler to be torn down prematurely.
Address this issue by making acpi_device_remove_notify_handler() wait
for the handling of all the ACPI events in progress to complete before
returning.
Fixes:
|
||
|
Rafael J. Wysocki
|
6d572d39b2 |
ACPI: bus: Add missing braces to acpi_sb_notify()
As per the kernel coding style. No functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Uwe Kleine-König
|
858a56630a |
ACPI: AGDI: Improve error reporting for problems during .remove()
Returning an error value in a platform driver's remove callback results in a generic error message being emitted by the driver core, but otherwise it doesn't make a difference. The device goes away anyhow. So instead of triggering the generic platform error message, emit a more helpful message if a problem occurs and return 0 to suppress the generic message. This patch is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Link: https://lore.kernel.org/r/20221014160623.467195-1-u.kleine-koenig@pengutronix.de Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Rafael J. Wysocki
|
684952212c | Merge back cpufreq changes for 6.4-rc1. | ||
|
Rafael J. Wysocki
|
065ca2a8c6 | Merge back Intel thermal control material for 6.4-rc1. | ||
|
Rafael J. Wysocki
|
a3babdb7a8 |
Merge branch 'acpi-x86'
Merge a quirk to force StorageD3Enable on AMD Picasso systems (Mario Limonciello). * acpi-x86: ACPI: x86: utils: Add Picasso to the list for forcing StorageD3Enable |
||
|
Hans de Goede
|
abe4f5ae5e |
ACPI: video: Remove desktops without backlight DMI quirks
After the recent backlight changes acpi_video# backlight devices are only registered when explicitly requested from the cmdline, by DMI quirk or by the GPU driver. This means that we no longer get false-positive backlight control support advertised on desktop boards. Remove the 3 DMI quirks for desktop boards where the false-positive issue was fixed through quirks before. Note many more desktop boards were affected but we never build a full quirk list for this. Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Hans de Goede
|
67abe9c6a8 |
ACPI: video: Remove register_backlight_delay module option and code
Since commit
|
||
|
Paul Menzel
|
05cda42712 |
ACPI: resource: Skip IRQ override on ASUS ExpertBook B1502CBA
Like the ASUS ExpertBook B2502CBA and various ASUS Vivobook laptops, the
ASUS ExpertBook B1502CBA has an ACPI DSDT table that describes IRQ 1 as
ActiveLow while the kernel overrides it to Edge_High.
$ sudo dmesg | grep DMI
DMI: ASUSTeK COMPUTER INC. ASUS EXPERTBOOK B1502CBA_B1502CBA/B1502CBA, BIOS B1502CBA.300 01/18/2023
$ grep -A 40 PS2K dsdt.dsl | grep IRQ -A 1
IRQ (Level, ActiveLow, Exclusive, )
{1}
This prevents the keyboard from working. To fix this issue, add this laptop
to the skip_override_table so that the kernel does not override IRQ 1.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217323
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
||
|
Greg Kroah-Hartman
|
5790d407da |
Merge 6.3-rc6 into char-misc-next
We need it here to apply other char/misc driver changes to. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Mario Limonciello
|
10b6b4a8ac |
ACPI: x86: utils: Add Picasso to the list for forcing StorageD3Enable
Picasso was the first APU that introduced s2idle support from AMD, and it was predating before vendors started to use `StorageD3Enable` in their firmware. Windows doesn't have problems with this hardware and NVME so it was likely on the list of hardcoded CPUs to use this behavior in Windows. Add it to the list for Linux to avoid NVME resume issues. Reported-by: Stuart Axon <stuaxo2@yahoo.com> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2449 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
void0red
|
ae5a0eccc8 |
ACPICA: ACPICA: check null return of ACPI_ALLOCATE_ZEROED in acpi_db_display_objects
ACPICA commit 0d5f467d6a0ba852ea3aad68663cbcbd43300fd4 ACPI_ALLOCATE_ZEROED may fails, object_info might be null and will cause null pointer dereference later. Link: https://github.com/acpica/acpica/commit/0d5f467d Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Kees Cook
|
376b0fb3ad |
ACPICA: acpi_resource_irq: Replace 1-element arrays with flexible array
ACPICA commit bfdd3446e7caf795c85c70326c137023942972c5 Similar to "Replace one-element array with flexible-array", replace the 1-element array with a proper flexible array member as defined by C99. This allows the code to operate without tripping compile-time and run- time bounds checkers (e.g. via __builtin_object_size(), -fsanitize=bounds, and/or -fstrict-flex-arrays=3). Note that the spec requires there be at least one interrupt, so use a union to keep space allocated for this. The only binary change in .text and .data sections is some rearrangement by the compiler of acpi_dm_address_common(), but appears to be harmless. Link: https://github.com/acpica/acpica/commit/bfdd3446 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Kees Cook
|
2a5ab99847 |
ACPICA: struct acpi_nfit_interleave: Replace 1-element array with flexible array
ACPICA commit e66decc6fca36b59194b0947d87d6a9bec078bc3 Similar to "Replace one-element array with flexible-array", replace the 1-element array with a proper flexible array member as defined by C99. This allows the code to operate without tripping compile-time and run- time bounds checkers (e.g. via __builtin_object_size(), -fsanitize=bounds, and/or -fstrict-flex-arrays=3). Unlike struct acpi_nfit_flush_address and struct acpi_nfit_smbios, which had their sizeof() uses adjusted in code, struct acpi_nfit_interleave did not. This appears to have been a bug. After this change, there is a binary difference in acpi_dm_dump_nfit() since the size of the structure now has the correct size, as the prior result was including the trailing U32: - mov $0x14,%ebp + mov $0x10,%ebp Link: https://github.com/acpica/acpica/commit/e66decc6 Signed-off-by: Bob Moore <robert.moore@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Kees Cook
|
74522fea27 |
ACPICA: actbl2: Replace 1-element arrays with flexible arrays
ACPICA commit 44f1af0664599e87bebc3a1260692baa27b2f264 Similar to "Replace one-element array with flexible-array", replace the 1-element array with a proper flexible array member as defined by C99. This allows the code to operate without tripping compile-time and run- time bounds checkers (e.g. via __builtin_object_size(), -fsanitize=bounds, and/or -fstrict-flex-arrays=3). The sizeof() uses with struct acpi_nfit_flush_address and struct acpi_nfit_smbios have been adjusted to drop the open-coded subtraction of the trailing single element. The result is no binary differences in .text nor .data sections. Link: https://github.com/acpica/acpica/commit/44f1af06 Signed-off-by: Bob Moore <robert.moore@intel.com> Co-developed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Tamir Duberstein
|
d0a874cb45 |
ACPICA: Avoid undefined behavior: load of misaligned address
ACPICA commit b3317239749d1907ec95e7aa2057d7ea29d3c638 Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x000020c1f68c9959 in acpi_rs_convert_aml_to_resource(struct acpi_resource*, union aml_resource*, struct acpi_rsconvert_info*) ../../third_party/acpica/source/components/resources/rsmisc.c:244 <platform-bus-x86.so>+0x2d0959 #1.2 0x000020e5d259f77f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f #1.1 0x000020e5d259f77f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f #1 0x000020e5d259f77f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f #2 0x000020e5d25a0385 in handletype_mismatch_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:137 <libclang_rt.asan.so>+0x3e385 #3 0x000020e5d259fead in compiler-rt/lib/ubsan/ubsan_handlers.cpp:142 <libclang_rt.asan.so>+0x3dead #4 0x000020c1f68c9959 in acpi_rs_convert_aml_to_resource(struct acpi_resource*, union aml_resource*, struct acpi_rsconvert_info*) ../../third_party/acpica/source/components/resources/rsmisc.c:244 <platform-bus-x86.so>+0x2d0959 #5 0x000020c1f68c65a9 in acpi_rs_convert_aml_to_resources(u8*, u32, u32, u8, void**) ../../third_party/acpica/source/components/resources/rslist.c:137 <platform-bus-x86.so>+0x2cd5a9 #6 0x000020c1f68efda9 in acpi_ut_walk_aml_resources(struct acpi_walk_state*, u8*, acpi_size, acpi_walk_aml_callback, void**) ../../third_party/acpica/source/components/utilities/utresrc.c:234 <platform-bus-x86.so>+0x2f6da9 #7 0x000020c1f68c1806 in acpi_rs_create_resource_list(union acpi_operand_object*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rscreate.c:199 <platform-bus-x86.so>+0x2c8806 #8 0x000020c1f68ccef2 in acpi_rs_get_method_data(acpi_handle, const char*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rsutils.c:770 <platform-bus-x86.so>+0x2d3ef2 #9 0x000020c1f68cd26d in acpi_walk_resources(acpi_handle, char*, acpi_walk_resource_callback, void*) ../../third_party/acpica/source/components/resources/rsxface.c:731 <platform-bus-x86.so>+0x2d426d #10 0x000020c1f66e4d48 in acpi::acpi_impl::walk_resources(acpi::acpi_impl*, acpi_handle, const char*, acpi::Acpi::resources_callable) ../../src/devices/board/lib/acpi/acpi-impl.cc:41 <platform-bus-x86.so>+0xebd48 #11 0x000020c1f66ea94d in acpi::device_builder::gather_resources(acpi::device_builder*, acpi::Acpi*, fidl::any_arena&, acpi::Manager*, acpi::device_builder::gather_resources_callback) ../../src/devices/board/lib/acpi/device-builder.cc:52 <platform-bus-x86.so>+0xf194d #12 0x000020c1f6776af2 in acpi::Manager::configure_discovered_devices(acpi::Manager*) ../../src/devices/board/lib/acpi/manager.cc:75 <platform-bus-x86.so>+0x17daf2 #13 0x000020c1f669eb44 in publish_acpi_devices(acpi::Manager*, zx_device_t*, zx_device_t*) ../../src/devices/board/drivers/x86/acpi-nswalk.cc:102 <platform-bus-x86.so>+0xa5b44 #14 0x000020c1f66b06f7 in x86::X86::do_init(x86::X86*) ../../src/devices/board/drivers/x86/x86.cc:65 <platform-bus-x86.so>+0xb76f7 #15.1 0x000020c1f66ba8ea in λ(x86::X86::ddk_init::(anon class)*) ../../src/devices/board/drivers/x86/x86.cc:82 <platform-bus-x86.so>+0xc18ea #15 0x000020c1f66ba8ea in fit::internal::target<(lambda at../../src/devices/board/drivers/x86/x86.cc:81:19), false, false, void>::invoke(void*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:181 <platform-bus-x86.so>+0xc18ea #16.2 0x000020c1f68ff86c in fit::internal::function_base<16UL, false, void()>::invoke(const fit::internal::function_base<16UL, false, void ()>*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:505 <platform-bus-x86.so>+0x30686c #16.1 0x000020c1f68ff86c in fit::function_impl<16UL, false, void()>::operator()(const fit::function_impl<16UL, false, void ()>*) ../../sdk/lib/fit/include/lib/fit/function.h:300 <platform-bus-x86.so>+0x30686c #16 0x000020c1f68ff86c in async::internal::retained_task::Handler(async_dispatcher_t*, async_task_t*, zx_status_t) ../../zircon/system/ulib/async/task.cc:25 <platform-bus-x86.so>+0x30686c #17.1 0x000022d99b37bd91 in λ(const driver_runtime::Dispatcher::post_task::(anon class)*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/dispatcher.cc:715 <libdriver_runtime.so>+0x4bd91 #17 0x000022d99b37bd91 in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:714:7), true, false, void, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int>::invoke(void*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0x4bd91 #18 0x000022d99b374bc9 in fit::internal::function_base<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int)>::invoke(const fit::internal::function_base<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int)>*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:505 <libdriver_runtime.so>+0x44bc9 #19 0x000022d99b3748dd in fit::callback_impl<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int)>::operator()(fit::callback_impl<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int)>*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/function.h:451 <libdriver_runtime.so>+0x448dd #20 0x000022d99b3656a6 in driver_runtime::callback_request::Call(driver_runtime::callback_request*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/callback_request.h:67 <libdriver_runtime.so>+0x356a6 #21 0x000022d99b36c4c8 in driver_runtime::Dispatcher::dispatch_callback(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >) ../../src/devices/bin/driver_runtime/dispatcher.cc:1093 <libdriver_runtime.so>+0x3c4c8 #22 0x000022d99b36d2c1 in driver_runtime::Dispatcher::dispatch_callbacks(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:1169 <libdriver_runtime.so>+0x3d2c1 #23.1 0x000022d99b37881e in λ(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>, const driver_runtime::Dispatcher::create_with_adder::(anon class)*) ../../src/devices/bin/driver_runtime/dispatcher.cc:338 <libdriver_runtime.so>+0x4881e #23 0x000022d99b37881e in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:337:7), true, false, void, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>>::invoke(void*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0x4881e #24 0x000022d99b374e7e in fit::internal::function_base<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>)>::invoke(const fit::internal::function_base<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>)>*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:505 <libdriver_runtime.so>+0x44e7e #25.1 0x000022d99b36e964 in fit::function_impl<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>)>::operator()(const fit::function_impl<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>)>*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/function.h:300 <libdriver_runtime.so>+0x3e964 #25 0x000022d99b36e964 in driver_runtime::Dispatcher::event_waiter::invoke_callback(driver_runtime::Dispatcher::event_waiter*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.h:299 <libdriver_runtime.so>+0x3e964 #26 0x000022d99b36e35d in driver_runtime::Dispatcher::event_waiter::handle_event(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/dispatcher.cc:1259 <libdriver_runtime.so>+0x3e35d #27.1 0x000022d99b378c00 in async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event(async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>*, zx_status_t, zx_packet_signal_t const*, async_dispatcher_t*, async::wait_base*) ../../src/devices/bin/driver_runtime/async_loop_owned_event_handler.h:59 <libdriver_runtime.so>+0x48c00 #27 0x000022d99b378c00 in async::wait_method<async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>, &async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event>::call_handler(async_dispatcher_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../zircon/system/ulib/async/include/lib/async/cpp/wait.h:201 <libdriver_runtime.so>+0x48c00 #28.1 0x000022d99b39aead in async_loop_run_once(async_loop_t*, zx_time_t) ../../zircon/system/ulib/async-loop/loop.c:415 <libdriver_runtime.so>+0x6aead #28 0x000022d99b39aead in async_loop_run(async_loop_t*, zx_time_t, _Bool) ../../zircon/system/ulib/async-loop/loop.c:288 <libdriver_runtime.so>+0x6aead #29 0x000022d99b39c78f in async_loop_run_thread(void*) ../../zircon/system/ulib/async-loop/loop.c:840 <libdriver_runtime.so>+0x6c78f #30 0x00004230f4a33edc in start_c11(void*) ../../zircon/third_party/ulib/musl/pthread/pthread_create.c:55 <libc.so>+0xd7edc #31 0x00004230f4b6496d in thread_trampoline(uintptr_t, uintptr_t) ../../zircon/system/ulib/runtime/thread.cc:100 <libc.so>+0x20896d and #0 0x00002357f60edb6d in acpi_rs_convert_aml_to_resource(struct acpi_resource*, union aml_resource*, struct acpi_rsconvert_info*) ../../third_party/acpica/source/components/resources/rsmisc.c:257 <platform-bus-x86.so>+0x2d0b6d #1.2 0x0000212756f4777f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f #1.1 0x0000212756f4777f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f #1 0x0000212756f4777f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f #2 0x0000212756f48385 in handletype_mismatch_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:137 <libclang_rt.asan.so>+0x3e385 #3 0x0000212756f47ead in compiler-rt/lib/ubsan/ubsan_handlers.cpp:142 <libclang_rt.asan.so>+0x3dead #4 0x00002357f60edb6d in acpi_rs_convert_aml_to_resource(struct acpi_resource*, union aml_resource*, struct acpi_rsconvert_info*) ../../third_party/acpica/source/components/resources/rsmisc.c:257 <platform-bus-x86.so>+0x2d0b6d #5 0x00002357f60ea5a9 in acpi_rs_convert_aml_to_resources(u8*, u32, u32, u8, void**) ../../third_party/acpica/source/components/resources/rslist.c:137 <platform-bus-x86.so>+0x2cd5a9 #6 0x00002357f6113d09 in acpi_ut_walk_aml_resources(struct acpi_walk_state*, u8*, acpi_size, acpi_walk_aml_callback, void**) ../../third_party/acpica/source/components/utilities/utresrc.c:234 <platform-bus-x86.so>+0x2f6d09 #7 0x00002357f60e5806 in acpi_rs_create_resource_list(union acpi_operand_object*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rscreate.c:199 <platform-bus-x86.so>+0x2c8806 #8 0x00002357f60f0e52 in acpi_rs_get_method_data(acpi_handle, const char*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rsutils.c:770 <platform-bus-x86.so>+0x2d3e52 #9 0x00002357f60f11cd in acpi_walk_resources(acpi_handle, char*, acpi_walk_resource_callback, void*) ../../third_party/acpica/source/components/resources/rsxface.c:731 <platform-bus-x86.so>+0x2d41cd #10 0x00002357f5f08d48 in acpi::acpi_impl::walk_resources(acpi::acpi_impl*, acpi_handle, const char*, acpi::Acpi::resources_callable) ../../src/devices/board/lib/acpi/acpi-impl.cc:41 <platform-bus-x86.so>+0xebd48 #11 0x00002357f5f0e94d in acpi::device_builder::gather_resources(acpi::device_builder*, acpi::Acpi*, fidl::any_arena&, acpi::Manager*, acpi::device_builder::gather_resources_callback) ../../src/devices/board/lib/acpi/device-builder.cc:52 <platform-bus-x86.so>+0xf194d #12 0x00002357f5f9aaf2 in acpi::Manager::configure_discovered_devices(acpi::Manager*) ../../src/devices/board/lib/acpi/manager.cc:75 <platform-bus-x86.so>+0x17daf2 #13 0x00002357f5ec2b44 in publish_acpi_devices(acpi::Manager*, zx_device_t*, zx_device_t*) ../../src/devices/board/drivers/x86/acpi-nswalk.cc:102 <platform-bus-x86.so>+0xa5b44 #14 0x00002357f5ed46f7 in x86::X86::do_init(x86::X86*) ../../src/devices/board/drivers/x86/x86.cc:65 <platform-bus-x86.so>+0xb76f7 #15.1 0x00002357f5ede8ea in λ(x86::X86::ddk_init::(anon class)*) ../../src/devices/board/drivers/x86/x86.cc:82 <platform-bus-x86.so>+0xc18ea #15 0x00002357f5ede8ea in fit::internal::target<(lambda at../../src/devices/board/drivers/x86/x86.cc:81:19), false, false, void>::invoke(void*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:181 <platform-bus-x86.so>+0xc18ea #16.2 0x00002357f61237cc in fit::internal::function_base<16UL, false, void()>::invoke(const fit::internal::function_base<16UL, false, void ()>*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:505 <platform-bus-x86.so>+0x3067cc #16.1 0x00002357f61237cc in fit::function_impl<16UL, false, void()>::operator()(const fit::function_impl<16UL, false, void ()>*) ../../sdk/lib/fit/include/lib/fit/function.h:300 <platform-bus-x86.so>+0x3067cc #16 0x00002357f61237cc in async::internal::retained_task::Handler(async_dispatcher_t*, async_task_t*, zx_status_t) ../../zircon/system/ulib/async/task.cc:25 <platform-bus-x86.so>+0x3067cc #17.1 0x000023df096b1d91 in λ(const driver_runtime::Dispatcher::post_task::(anon class)*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/dispatcher.cc:715 <libdriver_runtime.so>+0x4bd91 #17 0x000023df096b1d91 in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:714:7), true, false, void, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int>::invoke(void*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0x4bd91 #18 0x000023df096aabc9 in fit::internal::function_base<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int)>::invoke(const fit::internal::function_base<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int)>*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:505 <libdriver_runtime.so>+0x44bc9 #19 0x000023df096aa8dd in fit::callback_impl<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int)>::operator()(fit::callback_impl<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int)>*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/function.h:451 <libdriver_runtime.so>+0x448dd #20 0x000023df0969b6a6 in driver_runtime::callback_request::Call(driver_runtime::callback_request*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/callback_request.h:67 <libdriver_runtime.so>+0x356a6 #21 0x000023df096a24c8 in driver_runtime::Dispatcher::dispatch_callback(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >) ../../src/devices/bin/driver_runtime/dispatcher.cc:1093 <libdriver_runtime.so>+0x3c4c8 #22 0x000023df096a32c1 in driver_runtime::Dispatcher::dispatch_callbacks(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:1169 <libdriver_runtime.so>+0x3d2c1 #23.1 0x000023df096ae81e in λ(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>, const driver_runtime::Dispatcher::create_with_adder::(anon class)*) ../../src/devices/bin/driver_runtime/dispatcher.cc:338 <libdriver_runtime.so>+0x4881e #23 0x000023df096ae81e in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:337:7), true, false, void, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>>::invoke(void*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0x4881e #24 0x000023df096aae7e in fit::internal::function_base<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>)>::invoke(const fit::internal::function_base<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>)>*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:505 <libdriver_runtime.so>+0x44e7e #25.1 0x000023df096a4964 in fit::function_impl<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>)>::operator()(const fit::function_impl<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>)>*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/function.h:300 <libdriver_runtime.so>+0x3e964 #25 0x000023df096a4964 in driver_runtime::Dispatcher::event_waiter::invoke_callback(driver_runtime::Dispatcher::event_waiter*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.h:299 <libdriver_runtime.so>+0x3e964 #26 0x000023df096a435d in driver_runtime::Dispatcher::event_waiter::handle_event(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/dispatcher.cc:1259 <libdriver_runtime.so>+0x3e35d #27.1 0x000023df096aec00 in async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event(async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>*, zx_status_t, zx_packet_signal_t const*, async_dispatcher_t*, async::wait_base*) ../../src/devices/bin/driver_runtime/async_loop_owned_event_handler.h:59 <libdriver_runtime.so>+0x48c00 #27 0x000023df096aec00 in async::wait_method<async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>, &async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event>::call_handler(async_dispatcher_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../zircon/system/ulib/async/include/lib/async/cpp/wait.h:201 <libdriver_runtime.so>+0x48c00 #28.1 0x000023df096d0ead in async_loop_run_once(async_loop_t*, zx_time_t) ../../zircon/system/ulib/async-loop/loop.c:415 <libdriver_runtime.so>+0x6aead #28 0x000023df096d0ead in async_loop_run(async_loop_t*, zx_time_t, _Bool) ../../zircon/system/ulib/async-loop/loop.c:288 <libdriver_runtime.so>+0x6aead #29 0x000023df096d278f in async_loop_run_thread(void*) ../../zircon/system/ulib/async-loop/loop.c:840 <libdriver_runtime.so>+0x6c78f #30 0x0000424c7690eedc in start_c11(void*) ../../zircon/third_party/ulib/musl/pthread/pthread_create.c:55 <libc.so>+0xd7edc #31 0x0000424c76a3f96d in thread_trampoline(uintptr_t, uintptr_t) ../../zircon/system/ulib/runtime/thread.cc:100 <libc.so>+0x20896d and #0 0x000020883e0b9c01 in acpi_rs_convert_aml_to_resource(struct acpi_resource*, union aml_resource*, struct acpi_rsconvert_info*) ../../third_party/acpica/source/components/resources/rsmisc.c:334 <platform-bus-x86.so>+0x2d0c01 #1.2 0x000022cae2d8677f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f #1.1 0x000022cae2d8677f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f #1 0x000022cae2d8677f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f #2 0x000022cae2d87385 in handletype_mismatch_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:137 <libclang_rt.asan.so>+0x3e385 #3 0x000022cae2d86ead in compiler-rt/lib/ubsan/ubsan_handlers.cpp:142 <libclang_rt.asan.so>+0x3dead #4 0x000020883e0b9c01 in acpi_rs_convert_aml_to_resource(struct acpi_resource*, union aml_resource*, struct acpi_rsconvert_info*) ../../third_party/acpica/source/components/resources/rsmisc.c:334 <platform-bus-x86.so>+0x2d0c01 #5 0x000020883e0b65a9 in acpi_rs_convert_aml_to_resources(u8*, u32, u32, u8, void**) ../../third_party/acpica/source/components/resources/rslist.c:137 <platform-bus-x86.so>+0x2cd5a9 #6 0x000020883e0dfd89 in acpi_ut_walk_aml_resources(struct acpi_walk_state*, u8*, acpi_size, acpi_walk_aml_callback, void**) ../../third_party/acpica/source/components/utilities/utresrc.c:234 <platform-bus-x86.so>+0x2f6d89 #7 0x000020883e0b1806 in acpi_rs_create_resource_list(union acpi_operand_object*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rscreate.c:199 <platform-bus-x86.so>+0x2c8806 #8 0x000020883e0bced2 in acpi_rs_get_method_data(acpi_handle, const char*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rsutils.c:770 <platform-bus-x86.so>+0x2d3ed2 #9 0x000020883e0bd24d in acpi_walk_resources(acpi_handle, char*, acpi_walk_resource_callback, void*) ../../third_party/acpica/source/components/resources/rsxface.c:731 <platform-bus-x86.so>+0x2d424d #10 0x000020883ded4d48 in acpi::acpi_impl::walk_resources(acpi::acpi_impl*, acpi_handle, const char*, acpi::Acpi::resources_callable) ../../src/devices/board/lib/acpi/acpi-impl.cc:41 <platform-bus-x86.so>+0xebd48 #11 0x000020883deda94d in acpi::device_builder::gather_resources(acpi::device_builder*, acpi::Acpi*, fidl::any_arena&, acpi::Manager*, acpi::device_builder::gather_resources_callback) ../../src/devices/board/lib/acpi/device-builder.cc:52 <platform-bus-x86.so>+0xf194d #12 0x000020883df66af2 in acpi::Manager::configure_discovered_devices(acpi::Manager*) ../../src/devices/board/lib/acpi/manager.cc:75 <platform-bus-x86.so>+0x17daf2 #13 0x000020883de8eb44 in publish_acpi_devices(acpi::Manager*, zx_device_t*, zx_device_t*) ../../src/devices/board/drivers/x86/acpi-nswalk.cc:102 <platform-bus-x86.so>+0xa5b44 #14 0x000020883dea06f7 in x86::X86::do_init(x86::X86*) ../../src/devices/board/drivers/x86/x86.cc:65 <platform-bus-x86.so>+0xb76f7 #15.1 0x000020883deaa8ea in λ(x86::X86::ddk_init::(anon class)*) ../../src/devices/board/drivers/x86/x86.cc:82 <platform-bus-x86.so>+0xc18ea #15 0x000020883deaa8ea in fit::internal::target<(lambda at../../src/devices/board/drivers/x86/x86.cc:81:19), false, false, void>::invoke(void*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:181 <platform-bus-x86.so>+0xc18ea #16.2 0x000020883e0ef84c in fit::internal::function_base<16UL, false, void()>::invoke(const fit::internal::function_base<16UL, false, void ()>*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:505 <platform-bus-x86.so>+0x30684c #16.1 0x000020883e0ef84c in fit::function_impl<16UL, false, void()>::operator()(const fit::function_impl<16UL, false, void ()>*) ../../sdk/lib/fit/include/lib/fit/function.h:300 <platform-bus-x86.so>+0x30684c #16 0x000020883e0ef84c in async::internal::retained_task::Handler(async_dispatcher_t*, async_task_t*, zx_status_t) ../../zircon/system/ulib/async/task.cc:25 <platform-bus-x86.so>+0x30684c #17.1 0x000021ae7c20cd91 in λ(const driver_runtime::Dispatcher::post_task::(anon class)*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/dispatcher.cc:715 <libdriver_runtime.so>+0x4bd91 #17 0x000021ae7c20cd91 in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:714:7), true, false, void, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int>::invoke(void*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0x4bd91 #18 0x000021ae7c205bc9 in fit::internal::function_base<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int)>::invoke(const fit::internal::function_base<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int)>*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:505 <libdriver_runtime.so>+0x44bc9 #19 0x000021ae7c2058dd in fit::callback_impl<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int)>::operator()(fit::callback_impl<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int)>*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/function.h:451 <libdriver_runtime.so>+0x448dd #20 0x000021ae7c1f66a6 in driver_runtime::callback_request::Call(driver_runtime::callback_request*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/callback_request.h:67 <libdriver_runtime.so>+0x356a6 #21 0x000021ae7c1fd4c8 in driver_runtime::Dispatcher::dispatch_callback(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >) ../../src/devices/bin/driver_runtime/dispatcher.cc:1093 <libdriver_runtime.so>+0x3c4c8 #22 0x000021ae7c1fe2c1 in driver_runtime::Dispatcher::dispatch_callbacks(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:1169 <libdriver_runtime.so>+0x3d2c1 #23.1 0x000021ae7c20981e in λ(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>, const driver_runtime::Dispatcher::create_with_adder::(anon class)*) ../../src/devices/bin/driver_runtime/dispatcher.cc:338 <libdriver_runtime.so>+0x4881e #23 0x000021ae7c20981e in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:337:7), true, false, void, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>>::invoke(void*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0x4881e #24 0x000021ae7c205e7e in fit::internal::function_base<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>)>::invoke(const fit::internal::function_base<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>)>*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:505 <libdriver_runtime.so>+0x44e7e #25.1 0x000021ae7c1ff964 in fit::function_impl<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>)>::operator()(const fit::function_impl<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>)>*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/function.h:300 <libdriver_runtime.so>+0x3e964 #25 0x000021ae7c1ff964 in driver_runtime::Dispatcher::event_waiter::invoke_callback(driver_runtime::Dispatcher::event_waiter*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.h:299 <libdriver_runtime.so>+0x3e964 #26 0x000021ae7c1ff35d in driver_runtime::Dispatcher::event_waiter::handle_event(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/dispatcher.cc:1259 <libdriver_runtime.so>+0x3e35d #27.1 0x000021ae7c209c00 in async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event(async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>*, zx_status_t, zx_packet_signal_t const*, async_dispatcher_t*, async::wait_base*) ../../src/devices/bin/driver_runtime/async_loop_owned_event_handler.h:59 <libdriver_runtime.so>+0x48c00 #27 0x000021ae7c209c00 in async::wait_method<async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>, &async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event>::call_handler(async_dispatcher_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../zircon/system/ulib/async/include/lib/async/cpp/wait.h:201 <libdriver_runtime.so>+0x48c00 #28.1 0x000021ae7c22bead in async_loop_run_once(async_loop_t*, zx_time_t) ../../zircon/system/ulib/async-loop/loop.c:415 <libdriver_runtime.so>+0x6aead #28 0x000021ae7c22bead in async_loop_run(async_loop_t*, zx_time_t, _Bool) ../../zircon/system/ulib/async-loop/loop.c:288 <libdriver_runtime.so>+0x6aead #29 0x000021ae7c22d78f in async_loop_run_thread(void*) ../../zircon/system/ulib/async-loop/loop.c:840 <libdriver_runtime.so>+0x6c78f #30 0x000042b2518e3edc in start_c11(void*) ../../zircon/third_party/ulib/musl/pthread/pthread_create.c:55 <libc.so>+0xd7edc #31 0x000042b251a1496d in thread_trampoline(uintptr_t, uintptr_t) ../../zircon/system/ulib/runtime/thread.cc:100 <libc.so>+0x20896d Link: https://github.com/acpica/acpica/commit/b3317239 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Tamir Duberstein
|
bf44c56a99 |
ACPICA: Avoid undefined behavior: member access within misaligned address
ACPICA commit 8ea5ada64b48dada42dbd5f0f58a9ce18f882ede Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x000020d00518f81a in acpi_rs_convert_aml_to_resources(u8*, u32, u32, u8, void**) ../../third_party/acpica/source/components/resources/rslist.c:104 <platform-bus-x86.so>+0x2cd81a #1.2 0x00002348b567277f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f #1.1 0x00002348b567277f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f #1 0x00002348b567277f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f #2 0x00002348b5673385 in handletype_mismatch_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:137 <libclang_rt.asan.so>+0x3e385 #3 0x00002348b5672ead in compiler-rt/lib/ubsan/ubsan_handlers.cpp:142 <libclang_rt.asan.so>+0x3dead #4 0x000020d00518f81a in acpi_rs_convert_aml_to_resources(u8*, u32, u32, u8, void**) ../../third_party/acpica/source/components/resources/rslist.c:104 <platform-bus-x86.so>+0x2cd81a #5 0x000020d0051b8ea9 in acpi_ut_walk_aml_resources(struct acpi_walk_state*, u8*, acpi_size, acpi_walk_aml_callback, void**) ../../third_party/acpica/source/components/utilities/utresrc.c:234 <platform-bus-x86.so>+0x2f6ea9 #6 0x000020d00518a806 in acpi_rs_create_resource_list(union acpi_operand_object*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rscreate.c:199 <platform-bus-x86.so>+0x2c8806 #7 0x000020d005195ff2 in acpi_rs_get_method_data(acpi_handle, const char*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rsutils.c:770 <platform-bus-x86.so>+0x2d3ff2 #8 0x000020d00519636d in acpi_walk_resources(acpi_handle, char*, acpi_walk_resource_callback, void*) ../../third_party/acpica/source/components/resources/rsxface.c:731 <platform-bus-x86.so>+0x2d436d #9 0x000020d004fadd48 in acpi::acpi_impl::walk_resources(acpi::acpi_impl*, acpi_handle, const char*, acpi::Acpi::resources_callable) ../../src/devices/board/lib/acpi/acpi-impl.cc:41 <platform-bus-x86.so>+0xebd48 #10 0x000020d004fb394d in acpi::device_builder::gather_resources(acpi::device_builder*, acpi::Acpi*, fidl::any_arena&, acpi::Manager*, acpi::device_builder::gather_resources_callback) ../../src/devices/board/lib/acpi/device-builder.cc:52 <platform-bus-x86.so>+0xf194d #11 0x000020d00503faf2 in acpi::Manager::configure_discovered_devices(acpi::Manager*) ../../src/devices/board/lib/acpi/manager.cc:75 <platform-bus-x86.so>+0x17daf2 #12 0x000020d004f67b44 in publish_acpi_devices(acpi::Manager*, zx_device_t*, zx_device_t*) ../../src/devices/board/drivers/x86/acpi-nswalk.cc:102 <platform-bus-x86.so>+0xa5b44 #13 0x000020d004f796f7 in x86::X86::do_init(x86::X86*) ../../src/devices/board/drivers/x86/x86.cc:65 <platform-bus-x86.so>+0xb76f7 #14.1 0x000020d004f838ea in λ(x86::X86::ddk_init::(anon class)*) ../../src/devices/board/drivers/x86/x86.cc:82 <platform-bus-x86.so>+0xc18ea #14 0x000020d004f838ea in fit::internal::target<(lambda at../../src/devices/board/drivers/x86/x86.cc:81:19), false, false, void>::invoke(void*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:181 <platform-bus-x86.so>+0xc18ea #15.2 0x000020d0051c896c in fit::internal::function_base<16UL, false, void()>::invoke(const fit::internal::function_base<16UL, false, void ()>*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:505 <platform-bus-x86.so>+0x30696c #15.1 0x000020d0051c896c in fit::function_impl<16UL, false, void()>::operator()(const fit::function_impl<16UL, false, void ()>*) ../../sdk/lib/fit/include/lib/fit/function.h:300 <platform-bus-x86.so>+0x30696c #15 0x000020d0051c896c in async::internal::retained_task::Handler(async_dispatcher_t*, async_task_t*, zx_status_t) ../../zircon/system/ulib/async/task.cc:25 <platform-bus-x86.so>+0x30696c #16.1 0x00002061a33d3d91 in λ(const driver_runtime::Dispatcher::post_task::(anon class)*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/dispatcher.cc:715 <libdriver_runtime.so>+0x4bd91 #16 0x00002061a33d3d91 in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:714:7), true, false, void, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int>::invoke(void*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0x4bd91 #17 0x00002061a33ccbc9 in fit::internal::function_base<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int)>::invoke(const fit::internal::function_base<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int)>*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:505 <libdriver_runtime.so>+0x44bc9 #18 0x00002061a33cc8dd in fit::callback_impl<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int)>::operator()(fit::callback_impl<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int)>*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/function.h:451 <libdriver_runtime.so>+0x448dd #19 0x00002061a33bd6a6 in driver_runtime::callback_request::Call(driver_runtime::callback_request*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/callback_request.h:67 <libdriver_runtime.so>+0x356a6 #20 0x00002061a33c44c8 in driver_runtime::Dispatcher::dispatch_callback(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >) ../../src/devices/bin/driver_runtime/dispatcher.cc:1093 <libdriver_runtime.so>+0x3c4c8 #21 0x00002061a33c52c1 in driver_runtime::Dispatcher::dispatch_callbacks(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:1169 <libdriver_runtime.so>+0x3d2c1 #22.1 0x00002061a33d081e in λ(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>, const driver_runtime::Dispatcher::create_with_adder::(anon class)*) ../../src/devices/bin/driver_runtime/dispatcher.cc:338 <libdriver_runtime.so>+0x4881e #22 0x00002061a33d081e in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:337:7), true, false, void, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>>::invoke(void*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0x4881e #23 0x00002061a33cce7e in fit::internal::function_base<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>)>::invoke(const fit::internal::function_base<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>)>*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:505 <libdriver_runtime.so>+0x44e7e #24.1 0x00002061a33c6964 in fit::function_impl<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>)>::operator()(const fit::function_impl<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>)>*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/function.h:300 <libdriver_runtime.so>+0x3e964 #24 0x00002061a33c6964 in driver_runtime::Dispatcher::event_waiter::invoke_callback(driver_runtime::Dispatcher::event_waiter*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.h:299 <libdriver_runtime.so>+0x3e964 #25 0x00002061a33c635d in driver_runtime::Dispatcher::event_waiter::handle_event(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/dispatcher.cc:1259 <libdriver_runtime.so>+0x3e35d #26.1 0x00002061a33d0c00 in async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event(async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>*, zx_status_t, zx_packet_signal_t const*, async_dispatcher_t*, async::wait_base*) ../../src/devices/bin/driver_runtime/async_loop_owned_event_handler.h:59 <libdriver_runtime.so>+0x48c00 #26 0x00002061a33d0c00 in async::wait_method<async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>, &async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event>::call_handler(async_dispatcher_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../zircon/system/ulib/async/include/lib/async/cpp/wait.h:201 <libdriver_runtime.so>+0x48c00 #27.1 0x00002061a33f2ead in async_loop_run_once(async_loop_t*, zx_time_t) ../../zircon/system/ulib/async-loop/loop.c:415 <libdriver_runtime.so>+0x6aead #27 0x00002061a33f2ead in async_loop_run(async_loop_t*, zx_time_t, _Bool) ../../zircon/system/ulib/async-loop/loop.c:288 <libdriver_runtime.so>+0x6aead #28 0x00002061a33f478f in async_loop_run_thread(void*) ../../zircon/system/ulib/async-loop/loop.c:840 <libdriver_runtime.so>+0x6c78f #29 0x00004262135b7edc in start_c11(void*) ../../zircon/third_party/ulib/musl/pthread/pthread_create.c:55 <libc.so>+0xd7edc #30 0x00004262136e896d in thread_trampoline(uintptr_t, uintptr_t) ../../zircon/system/ulib/runtime/thread.cc:100 <libc.so>+0x20896d Link: https://github.com/acpica/acpica/commit/8ea5ada6 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Tamir Duberstein
|
5bd2315bd2 |
ACPICA: Avoid undefined behavior: member access within misaligned address
ACPICA commit 60cbb20c009fd67e7b973d67b5dcb4a7b12681d9 Before this change we see the following UBSAN stack traces in Fuchsia: #0 0x0000219ce3426bd7 in acpi_rs_get_list_length(u8*, u32, acpi_size*) ../../third_party/acpica/source/components/resources/rscalc.c:631 <platform-bus-x86.so>+0x2cbbd7 #1.2 0x00002240d84b077f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f #1.1 0x00002240d84b077f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f #1 0x00002240d84b077f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f #2 0x00002240d84b1385 in handletype_mismatch_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:137 <libclang_rt.asan.so>+0x3e385 #3 0x00002240d84b0ead in compiler-rt/lib/ubsan/ubsan_handlers.cpp:142 <libclang_rt.asan.so>+0x3dead #4 0x0000219ce3426bd7 in acpi_rs_get_list_length(u8*, u32, acpi_size*) ../../third_party/acpica/source/components/resources/rscalc.c:631 <platform-bus-x86.so>+0x2cbbd7 #5 0x0000219ce3423777 in acpi_rs_create_resource_list(union acpi_operand_object*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rscreate.c:178 <platform-bus-x86.so>+0x2c8777 #6 0x0000219ce342f1b2 in acpi_rs_get_method_data(acpi_handle, const char*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rsutils.c:770 <platform-bus-x86.so>+0x2d41b2 #7 0x0000219ce342f52d in acpi_walk_resources(acpi_handle, char*, acpi_walk_resource_callback, void*) ../../third_party/acpica/source/components/resources/rsxface.c:731 <platform-bus-x86.so>+0x2d452d #8 0x0000219ce3246d48 in acpi::acpi_impl::walk_resources(acpi::acpi_impl*, acpi_handle, const char*, acpi::Acpi::resources_callable) ../../src/devices/board/lib/acpi/acpi-impl.cc:41 <platform-bus-x86.so>+0xebd48 #9 0x0000219ce324c94d in acpi::device_builder::gather_resources(acpi::device_builder*, acpi::Acpi*, fidl::any_arena&, acpi::Manager*, acpi::device_builder::gather_resources_callback) ../../src/devices/board/lib/acpi/device-builder.cc:52 <platform-bus-x86.so>+0xf194d #10 0x0000219ce32d8af2 in acpi::Manager::configure_discovered_devices(acpi::Manager*) ../../src/devices/board/lib/acpi/manager.cc:75 <platform-bus-x86.so>+0x17daf2 #11 0x0000219ce3200b44 in publish_acpi_devices(acpi::Manager*, zx_device_t*, zx_device_t*) ../../src/devices/board/drivers/x86/acpi-nswalk.cc:102 <platform-bus-x86.so>+0xa5b44 #12 0x0000219ce32126f7 in x86::X86::do_init(x86::X86*) ../../src/devices/board/drivers/x86/x86.cc:65 <platform-bus-x86.so>+0xb76f7 #13.1 0x0000219ce321c8ea in λ(x86::X86::ddk_init::(anon class)*) ../../src/devices/board/drivers/x86/x86.cc:82 <platform-bus-x86.so>+0xc18ea #13 0x0000219ce321c8ea in fit::internal::target<(lambda at../../src/devices/board/drivers/x86/x86.cc:81:19), false, false, void>::invoke(void*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:181 <platform-bus-x86.so>+0xc18ea #14.2 0x0000219ce3461b2c in fit::internal::function_base<16UL, false, void()>::invoke(const fit::internal::function_base<16UL, false, void ()>*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:505 <platform-bus-x86.so>+0x306b2c #14.1 0x0000219ce3461b2c in fit::function_impl<16UL, false, void()>::operator()(const fit::function_impl<16UL, false, void ()>*) ../../sdk/lib/fit/include/lib/fit/function.h:300 <platform-bus-x86.so>+0x306b2c #14 0x0000219ce3461b2c in async::internal::retained_task::Handler(async_dispatcher_t*, async_task_t*, zx_status_t) ../../zircon/system/ulib/async/task.cc:25 <platform-bus-x86.so>+0x306b2c #15.1 0x000022cc55016d91 in λ(const driver_runtime::Dispatcher::post_task::(anon class)*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/dispatcher.cc:715 <libdriver_runtime.so>+0x4bd91 #15 0x000022cc55016d91 in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:714:7), true, false, void, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int>::invoke(void*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0x4bd91 #16 0x000022cc5500fbc9 in fit::internal::function_base<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int)>::invoke(const fit::internal::function_base<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int)>*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:505 <libdriver_runtime.so>+0x44bc9 #17 0x000022cc5500f8dd in fit::callback_impl<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int)>::operator()(fit::callback_impl<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int)>*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/function.h:451 <libdriver_runtime.so>+0x448dd #18 0x000022cc550006a6 in driver_runtime::callback_request::Call(driver_runtime::callback_request*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/callback_request.h:67 <libdriver_runtime.so>+0x356a6 #19 0x000022cc550074c8 in driver_runtime::Dispatcher::dispatch_callback(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >) ../../src/devices/bin/driver_runtime/dispatcher.cc:1093 <libdriver_runtime.so>+0x3c4c8 #20 0x000022cc550082c1 in driver_runtime::Dispatcher::dispatch_callbacks(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:1169 <libdriver_runtime.so>+0x3d2c1 #21.1 0x000022cc5501381e in λ(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>, const driver_runtime::Dispatcher::create_with_adder::(anon class)*) ../../src/devices/bin/driver_runtime/dispatcher.cc:338 <libdriver_runtime.so>+0x4881e #21 0x000022cc5501381e in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:337:7), true, false, void, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>>::invoke(void*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0x4881e #22 0x000022cc5500fe7e in fit::internal::function_base<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>)>::invoke(const fit::internal::function_base<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>)>*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:505 <libdriver_runtime.so>+0x44e7e #23.1 0x000022cc55009964 in fit::function_impl<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>)>::operator()(const fit::function_impl<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>)>*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/function.h:300 <libdriver_runtime.so>+0x3e964 #23 0x000022cc55009964 in driver_runtime::Dispatcher::event_waiter::invoke_callback(driver_runtime::Dispatcher::event_waiter*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.h:299 <libdriver_runtime.so>+0x3e964 #24 0x000022cc5500935d in driver_runtime::Dispatcher::event_waiter::handle_event(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/dispatcher.cc:1259 <libdriver_runtime.so>+0x3e35d #25.1 0x000022cc55013c00 in async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event(async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>*, zx_status_t, zx_packet_signal_t const*, async_dispatcher_t*, async::wait_base*) ../../src/devices/bin/driver_runtime/async_loop_owned_event_handler.h:59 <libdriver_runtime.so>+0x48c00 #25 0x000022cc55013c00 in async::wait_method<async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>, &async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event>::call_handler(async_dispatcher_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../zircon/system/ulib/async/include/lib/async/cpp/wait.h:201 <libdriver_runtime.so>+0x48c00 #26.1 0x000022cc55035ead in async_loop_run_once(async_loop_t*, zx_time_t) ../../zircon/system/ulib/async-loop/loop.c:415 <libdriver_runtime.so>+0x6aead #26 0x000022cc55035ead in async_loop_run(async_loop_t*, zx_time_t, _Bool) ../../zircon/system/ulib/async-loop/loop.c:288 <libdriver_runtime.so>+0x6aead #27 0x000022cc5503778f in async_loop_run_thread(void*) ../../zircon/system/ulib/async-loop/loop.c:840 <libdriver_runtime.so>+0x6c78f #28 0x000042d43f9f1edc in start_c11(void*) ../../zircon/third_party/ulib/musl/pthread/pthread_create.c:55 <libc.so>+0xd7edc #29 0x000042d43fb2296d in thread_trampoline(uintptr_t, uintptr_t) ../../zircon/system/ulib/runtime/thread.cc:100 <libc.so>+0x20896d and #0 0x000022db2bfa3753 in acpi_rs_get_list_length(u8*, u32, acpi_size*) ../../third_party/acpica/source/components/resources/rscalc.c:704 <platform-bus-x86.so>+0x2cb753 #1.2 0x000020c421f9777f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f #1.1 0x000020c421f9777f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f #1 0x000020c421f9777f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f #2 0x000020c421f98385 in handletype_mismatch_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:137 <libclang_rt.asan.so>+0x3e385 #3 0x000020c421f97ead in compiler-rt/lib/ubsan/ubsan_handlers.cpp:142 <libclang_rt.asan.so>+0x3dead #4 0x000022db2bfa3753 in acpi_rs_get_list_length(u8*, u32, acpi_size*) ../../third_party/acpica/source/components/resources/rscalc.c:704 <platform-bus-x86.so>+0x2cb753 #5 0x000022db2bfa0777 in acpi_rs_create_resource_list(union acpi_operand_object*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rscreate.c:178 <platform-bus-x86.so>+0x2c8777 #6 0x000022db2bfac0f2 in acpi_rs_get_method_data(acpi_handle, const char*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rsutils.c:770 <platform-bus-x86.so>+0x2d40f2 #7 0x000022db2bfac46d in acpi_walk_resources(acpi_handle, char*, acpi_walk_resource_callback, void*) ../../third_party/acpica/source/components/resources/rsxface.c:731 <platform-bus-x86.so>+0x2d446d #8 0x000022db2bdc3d48 in acpi::acpi_impl::walk_resources(acpi::acpi_impl*, acpi_handle, const char*, acpi::Acpi::resources_callable) ../../src/devices/board/lib/acpi/acpi-impl.cc:41 <platform-bus-x86.so>+0xebd48 #9 0x000022db2bdc994d in acpi::device_builder::gather_resources(acpi::device_builder*, acpi::Acpi*, fidl::any_arena&, acpi::Manager*, acpi::device_builder::gather_resources_callback) ../../src/devices/board/lib/acpi/device-builder.cc:52 <platform-bus-x86.so>+0xf194d #10 0x000022db2be55af2 in acpi::Manager::configure_discovered_devices(acpi::Manager*) ../../src/devices/board/lib/acpi/manager.cc:75 <platform-bus-x86.so>+0x17daf2 #11 0x000022db2bd7db44 in publish_acpi_devices(acpi::Manager*, zx_device_t*, zx_device_t*) ../../src/devices/board/drivers/x86/acpi-nswalk.cc:102 <platform-bus-x86.so>+0xa5b44 #12 0x000022db2bd8f6f7 in x86::X86::do_init(x86::X86*) ../../src/devices/board/drivers/x86/x86.cc:65 <platform-bus-x86.so>+0xb76f7 #13.1 0x000022db2bd998ea in λ(x86::X86::ddk_init::(anon class)*) ../../src/devices/board/drivers/x86/x86.cc:82 <platform-bus-x86.so>+0xc18ea #13 0x000022db2bd998ea in fit::internal::target<(lambda at../../src/devices/board/drivers/x86/x86.cc:81:19), false, false, void>::invoke(void*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:181 <platform-bus-x86.so>+0xc18ea #14.2 0x000022db2bfdea6c in fit::internal::function_base<16UL, false, void()>::invoke(const fit::internal::function_base<16UL, false, void ()>*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:505 <platform-bus-x86.so>+0x306a6c #14.1 0x000022db2bfdea6c in fit::function_impl<16UL, false, void()>::operator()(const fit::function_impl<16UL, false, void ()>*) ../../sdk/lib/fit/include/lib/fit/function.h:300 <platform-bus-x86.so>+0x306a6c #14 0x000022db2bfdea6c in async::internal::retained_task::Handler(async_dispatcher_t*, async_task_t*, zx_status_t) ../../zircon/system/ulib/async/task.cc:25 <platform-bus-x86.so>+0x306a6c #15.1 0x0000216d819f2d91 in λ(const driver_runtime::Dispatcher::post_task::(anon class)*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/dispatcher.cc:715 <libdriver_runtime.so>+0x4bd91 #15 0x0000216d819f2d91 in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:714:7), true, false, void, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int>::invoke(void*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0x4bd91 #16 0x0000216d819ebbc9 in fit::internal::function_base<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int)>::invoke(const fit::internal::function_base<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int)>*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:505 <libdriver_runtime.so>+0x44bc9 #17 0x0000216d819eb8dd in fit::callback_impl<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int)>::operator()(fit::callback_impl<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int)>*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/function.h:451 <libdriver_runtime.so>+0x448dd #18 0x0000216d819dc6a6 in driver_runtime::callback_request::Call(driver_runtime::callback_request*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/callback_request.h:67 <libdriver_runtime.so>+0x356a6 #19 0x0000216d819e34c8 in driver_runtime::Dispatcher::dispatch_callback(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >) ../../src/devices/bin/driver_runtime/dispatcher.cc:1093 <libdriver_runtime.so>+0x3c4c8 #20 0x0000216d819e42c1 in driver_runtime::Dispatcher::dispatch_callbacks(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:1169 <libdriver_runtime.so>+0x3d2c1 #21.1 0x0000216d819ef81e in λ(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>, const driver_runtime::Dispatcher::create_with_adder::(anon class)*) ../../src/devices/bin/driver_runtime/dispatcher.cc:338 <libdriver_runtime.so>+0x4881e #21 0x0000216d819ef81e in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:337:7), true, false, void, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>>::invoke(void*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0x4881e #22 0x0000216d819ebe7e in fit::internal::function_base<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>)>::invoke(const fit::internal::function_base<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>)>*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:505 <libdriver_runtime.so>+0x44e7e #23.1 0x0000216d819e5964 in fit::function_impl<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>)>::operator()(const fit::function_impl<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>)>*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/function.h:300 <libdriver_runtime.so>+0x3e964 #23 0x0000216d819e5964 in driver_runtime::Dispatcher::event_waiter::invoke_callback(driver_runtime::Dispatcher::event_waiter*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.h:299 <libdriver_runtime.so>+0x3e964 #24 0x0000216d819e535d in driver_runtime::Dispatcher::event_waiter::handle_event(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/dispatcher.cc:1259 <libdriver_runtime.so>+0x3e35d #25.1 0x0000216d819efc00 in async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event(async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>*, zx_status_t, zx_packet_signal_t const*, async_dispatcher_t*, async::wait_base*) ../../src/devices/bin/driver_runtime/async_loop_owned_event_handler.h:59 <libdriver_runtime.so>+0x48c00 #25 0x0000216d819efc00 in async::wait_method<async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>, &async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event>::call_handler(async_dispatcher_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../zircon/system/ulib/async/include/lib/async/cpp/wait.h:201 <libdriver_runtime.so>+0x48c00 #26.1 0x0000216d81a11ead in async_loop_run_once(async_loop_t*, zx_time_t) ../../zircon/system/ulib/async-loop/loop.c:415 <libdriver_runtime.so>+0x6aead #26 0x0000216d81a11ead in async_loop_run(async_loop_t*, zx_time_t, _Bool) ../../zircon/system/ulib/async-loop/loop.c:288 <libdriver_runtime.so>+0x6aead #27 0x0000216d81a1378f in async_loop_run_thread(void*) ../../zircon/system/ulib/async-loop/loop.c:840 <libdriver_runtime.so>+0x6c78f #28 0x0000417ba4b4bedc in start_c11(void*) ../../zircon/third_party/ulib/musl/pthread/pthread_create.c:55 <libc.so>+0xd7edc #29 0x0000417ba4c7c96d in thread_trampoline(uintptr_t, uintptr_t) ../../zircon/system/ulib/runtime/thread.cc:100 <libc.so>+0x20896d Link: https://github.com/acpica/acpica/commit/60cbb20c Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Tamir Duberstein
|
218387e6cf |
ACPICA: Avoid undefined behavior: member access within misaligned address
ACPICA commit 7b23bdc37432f0b7fb6c3b6aa76debdcb7eb18c3 Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x00002132da6299a1 in acpi_ut_validate_resource(struct acpi_walk_state*, void*, u8*) ../../third_party/acpica/source/components/utilities/utresrc.c:426 <platform-bus-x86.so>+0x2f79a1 #1.2 0x000023e6cd58577f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f #1.1 0x000023e6cd58577f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f #1 0x000023e6cd58577f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f #2 0x000023e6cd586385 in handletype_mismatch_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:137 <libclang_rt.asan.so>+0x3e385 #3 0x000023e6cd585ead in compiler-rt/lib/ubsan/ubsan_handlers.cpp:142 <libclang_rt.asan.so>+0x3dead #4 0x00002132da6299a1 in acpi_ut_validate_resource(struct acpi_walk_state*, void*, u8*) ../../third_party/acpica/source/components/utilities/utresrc.c:426 <platform-bus-x86.so>+0x2f79a1 #5 0x00002132da628ffe in acpi_ut_walk_aml_resources(struct acpi_walk_state*, u8*, acpi_size, acpi_walk_aml_callback, void**) ../../third_party/acpica/source/components/utilities/utresrc.c:216 <platform-bus-x86.so>+0x2f6ffe #6 0x00002132da5b2405 in acpi_ex_concat_template(union acpi_operand_object*, union acpi_operand_object*, union acpi_operand_object**, struct acpi_walk_state*) ../../third_party/acpica/source/components/executer/exconcat.c:414 <platform-bus-x86.so>+0x280405 #7 0x00002132da5ad5a4 in acpi_ex_opcode_2A_1T_1R(struct acpi_walk_state*) ../../third_party/acpica/source/components/executer/exoparg2.c:383 <platform-bus-x86.so>+0x27b5a4 #8 0x00002132da57ee7d in acpi_ds_exec_end_op(struct acpi_walk_state*) ../../third_party/acpica/source/components/dispatcher/dswexec.c:482 <platform-bus-x86.so>+0x24ce7d #9 0x00002132da5ed196 in acpi_ps_parse_loop(struct acpi_walk_state*) ../../third_party/acpica/source/components/parser/psloop.c:554 <platform-bus-x86.so>+0x2bb196 #10 0x00002132da5ea458 in acpi_ps_parse_aml(struct acpi_walk_state*) ../../third_party/acpica/source/components/parser/psparse.c:525 <platform-bus-x86.so>+0x2b8458 #11 0x00002132da5f8a92 in acpi_ps_execute_method(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/parser/psxface.c:244 <platform-bus-x86.so>+0x2c6a92 #12 0x00002132da55c2b2 in acpi_ns_evaluate(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/namespace/nseval.c:250 <platform-bus-x86.so>+0x22a2b2 #13 0x00002132da61fd45 in acpi_ut_evaluate_object(struct acpi_namespace_node*, const char*, u32, union acpi_operand_object**) ../../third_party/acpica/source/components/utilities/uteval.c:100 <platform-bus-x86.so>+0x2edd45 #14 0x00002132da606197 in acpi_rs_get_method_data(acpi_handle, const char*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rsutils.c:757 <platform-bus-x86.so>+0x2d4197 #15 0x00002132da60652d in acpi_walk_resources(acpi_handle, char*, acpi_walk_resource_callback, void*) ../../third_party/acpica/source/components/resources/rsxface.c:731 <platform-bus-x86.so>+0x2d452d #16 0x00002132da41dd48 in acpi::acpi_impl::walk_resources(acpi::acpi_impl*, acpi_handle, const char*, acpi::Acpi::resources_callable) ../../src/devices/board/lib/acpi/acpi-impl.cc:41 <platform-bus-x86.so>+0xebd48 #17 0x00002132da42394d in acpi::device_builder::gather_resources(acpi::device_builder*, acpi::Acpi*, fidl::any_arena&, acpi::Manager*, acpi::device_builder::gather_resources_callback) ../../src/devices/board/lib/acpi/device-builder.cc:52 <platform-bus-x86.so>+0xf194d #18 0x00002132da4afaf2 in acpi::Manager::configure_discovered_devices(acpi::Manager*) ../../src/devices/board/lib/acpi/manager.cc:75 <platform-bus-x86.so>+0x17daf2 #19 0x00002132da3d7b44 in publish_acpi_devices(acpi::Manager*, zx_device_t*, zx_device_t*) ../../src/devices/board/drivers/x86/acpi-nswalk.cc:102 <platform-bus-x86.so>+0xa5b44 #20 0x00002132da3e96f7 in x86::X86::do_init(x86::X86*) ../../src/devices/board/drivers/x86/x86.cc:65 <platform-bus-x86.so>+0xb76f7 #21.1 0x00002132da3f38ea in λ(x86::X86::ddk_init::(anon class)*) ../../src/devices/board/drivers/x86/x86.cc:82 <platform-bus-x86.so>+0xc18ea #21 0x00002132da3f38ea in fit::internal::target<(lambda at../../src/devices/board/drivers/x86/x86.cc:81:19), false, false, void>::invoke(void*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:181 <platform-bus-x86.so>+0xc18ea #22.2 0x00002132da638c6c in fit::internal::function_base<16UL, false, void()>::invoke(const fit::internal::function_base<16UL, false, void ()>*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:505 <platform-bus-x86.so>+0x306c6c #22.1 0x00002132da638c6c in fit::function_impl<16UL, false, void()>::operator()(const fit::function_impl<16UL, false, void ()>*) ../../sdk/lib/fit/include/lib/fit/function.h:300 <platform-bus-x86.so>+0x306c6c #22 0x00002132da638c6c in async::internal::retained_task::Handler(async_dispatcher_t*, async_task_t*, zx_status_t) ../../zircon/system/ulib/async/task.cc:25 <platform-bus-x86.so>+0x306c6c #23.1 0x000022c67b305d91 in λ(const driver_runtime::Dispatcher::post_task::(anon class)*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/dispatcher.cc:715 <libdriver_runtime.so>+0x4bd91 #23 0x000022c67b305d91 in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:714:7), true, false, void, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int>::invoke(void*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0x4bd91 #24 0x000022c67b2febc9 in fit::internal::function_base<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int)>::invoke(const fit::internal::function_base<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int)>*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:505 <libdriver_runtime.so>+0x44bc9 #25 0x000022c67b2fe8dd in fit::callback_impl<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int)>::operator()(fit::callback_impl<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int)>*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/function.h:451 <libdriver_runtime.so>+0x448dd #26 0x000022c67b2ef6a6 in driver_runtime::callback_request::Call(driver_runtime::callback_request*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/callback_request.h:67 <libdriver_runtime.so>+0x356a6 #27 0x000022c67b2f64c8 in driver_runtime::Dispatcher::dispatch_callback(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >) ../../src/devices/bin/driver_runtime/dispatcher.cc:1093 <libdriver_runtime.so>+0x3c4c8 #28 0x000022c67b2f72c1 in driver_runtime::Dispatcher::dispatch_callbacks(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:1169 <libdriver_runtime.so>+0x3d2c1 #29.1 0x000022c67b30281e in λ(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>, const driver_runtime::Dispatcher::create_with_adder::(anon class)*) ../../src/devices/bin/driver_runtime/dispatcher.cc:338 <libdriver_runtime.so>+0x4881e #29 0x000022c67b30281e in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:337:7), true, false, void, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>>::invoke(void*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0x4881e #30 0x000022c67b2fee7e in fit::internal::function_base<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>)>::invoke(const fit::internal::function_base<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>)>*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:505 <libdriver_runtime.so>+0x44e7e #31.1 0x000022c67b2f8964 in fit::function_impl<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>)>::operator()(const fit::function_impl<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>)>*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/function.h:300 <libdriver_runtime.so>+0x3e964 #31 0x000022c67b2f8964 in driver_runtime::Dispatcher::event_waiter::invoke_callback(driver_runtime::Dispatcher::event_waiter*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.h:299 <libdriver_runtime.so>+0x3e964 #32 0x000022c67b2f835d in driver_runtime::Dispatcher::event_waiter::handle_event(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/dispatcher.cc:1259 <libdriver_runtime.so>+0x3e35d #33.1 0x000022c67b302c00 in async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event(async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>*, zx_status_t, zx_packet_signal_t const*, async_dispatcher_t*, async::wait_base*) ../../src/devices/bin/driver_runtime/async_loop_owned_event_handler.h:59 <libdriver_runtime.so>+0x48c00 #33 0x000022c67b302c00 in async::wait_method<async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>, &async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event>::call_handler(async_dispatcher_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../zircon/system/ulib/async/include/lib/async/cpp/wait.h:201 <libdriver_runtime.so>+0x48c00 #34.1 0x000022c67b324ead in async_loop_run_once(async_loop_t*, zx_time_t) ../../zircon/system/ulib/async-loop/loop.c:415 <libdriver_runtime.so>+0x6aead #34 0x000022c67b324ead in async_loop_run(async_loop_t*, zx_time_t, _Bool) ../../zircon/system/ulib/async-loop/loop.c:288 <libdriver_runtime.so>+0x6aead #35 0x000022c67b32678f in async_loop_run_thread(void*) ../../zircon/system/ulib/async-loop/loop.c:840 <libdriver_runtime.so>+0x6c78f #36 0x0000431cc3246edc in start_c11(void*) ../../zircon/third_party/ulib/musl/pthread/pthread_create.c:55 <libc.so>+0xd7edc #37 0x0000431cc337796d in thread_trampoline(uintptr_t, uintptr_t) ../../zircon/system/ulib/runtime/thread.cc:100 <libc.so>+0x20896d Link: https://github.com/acpica/acpica/commit/7b23bdc3 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Tamir Duberstein
|
24d9609b3c |
ACPICA: Avoid undefined behavior: member access within misaligned address
ACPICA commit c14708336bd18552b28643575de7b5beb9b864e9 Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x0000220c98288eba in acpi_rs_get_address_common(struct acpi_resource*, union aml_resource*) ../../third_party/acpica/source/components/resources/rsaddr.c:331 <platform-bus-x86.so>+0x8f6eba #1.2 0x000023625f46077f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f #1.1 0x000023625f46077f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f #1 0x000023625f46077f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f #2 0x000023625f461385 in handletype_mismatch_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:137 <libclang_rt.asan.so>+0x3e385 #3 0x000023625f460ead in compiler-rt/lib/ubsan/ubsan_handlers.cpp:142 <libclang_rt.asan.so>+0x3dead #4 0x0000220c98288eba in acpi_rs_get_address_common(struct acpi_resource*, union aml_resource*) ../../third_party/acpica/source/components/resources/rsaddr.c:331 <platform-bus-x86.so>+0x8f6eba #5 0x0000220c9828ea57 in acpi_rs_convert_aml_to_resource(struct acpi_resource*, union aml_resource*, struct acpi_rsconvert_info*) ../../third_party/acpica/source/components/resources/rsmisc.c:352 <platform-bus-x86.so>+0x8fca57 #6 0x0000220c9828992c in acpi_rs_convert_aml_to_resources(u8*, u32, u32, u8, void**) ../../third_party/acpica/source/components/resources/rslist.c:132 <platform-bus-x86.so>+0x8f792c #7 0x0000220c982d1cfc in acpi_ut_walk_aml_resources(struct acpi_walk_state*, u8*, acpi_size, acpi_walk_aml_callback, void**) ../../third_party/acpica/source/components/utilities/utresrc.c:234 <platform-bus-x86.so>+0x93fcfc #8 0x0000220c98281e46 in acpi_rs_create_resource_list(union acpi_operand_object*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rscreate.c:199 <platform-bus-x86.so>+0x8efe46 #9 0x0000220c98293b51 in acpi_rs_get_method_data(acpi_handle, const char*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rsutils.c:770 <platform-bus-x86.so>+0x901b51 #10 0x0000220c9829438d in acpi_walk_resources(acpi_handle, char*, acpi_walk_resource_callback, void*) ../../third_party/acpica/source/components/resources/rsxface.c:731 <platform-bus-x86.so>+0x90238d #11 0x0000220c97db272b in acpi::acpi_impl::walk_resources(acpi::acpi_impl*, acpi_handle, const char*, acpi::Acpi::resources_callable) ../../src/devices/board/lib/acpi/acpi-impl.cc:41 <platform-bus-x86.so>+0x42072b #12 0x0000220c97dcec59 in acpi::device_builder::gather_resources(acpi::device_builder*, acpi::Acpi*, fidl::any_arena&, acpi::Manager*, acpi::device_builder::gather_resources_callback) ../../src/devices/board/lib/acpi/device-builder.cc:52 <platform-bus-x86.so>+0x43cc59 #13 0x0000220c97f94a3f in acpi::Manager::configure_discovered_devices(acpi::Manager*) ../../src/devices/board/lib/acpi/manager.cc:75 <platform-bus-x86.so>+0x602a3f #14 0x0000220c97c642c7 in publish_acpi_devices(acpi::Manager*, zx_device_t*, zx_device_t*) ../../src/devices/board/drivers/x86/acpi-nswalk.cc:102 <platform-bus-x86.so>+0x2d22c7 #15 0x0000220c97caf3e6 in x86::X86::do_init(x86::X86*) ../../src/devices/board/drivers/x86/x86.cc:65 <platform-bus-x86.so>+0x31d3e6 #16 0x0000220c97cd72ae in λ(x86::X86::ddk_init::(anon class)*) ../../src/devices/board/drivers/x86/x86.cc:82 <platform-bus-x86.so>+0x3452ae #17 0x0000220c97cd7223 in fit::internal::target<(lambda at../../src/devices/board/drivers/x86/x86.cc:81:19), false, false, void>::invoke(void*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:181 <platform-bus-x86.so>+0x345223 #18 0x0000220c97f48eb0 in fit::internal::function_base<16UL, false, void()>::invoke(const fit::internal::function_base<16UL, false, void ()>*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:505 <platform-bus-x86.so>+0x5b6eb0 #19 0x0000220c97f48d2a in fit::function_impl<16UL, false, void()>::operator()(const fit::function_impl<16UL, false, void ()>*) ../../sdk/lib/fit/include/lib/fit/function.h:300 <platform-bus-x86.so>+0x5b6d2a #20 0x0000220c982f9245 in async::internal::retained_task::Handler(async_dispatcher_t*, async_task_t*, zx_status_t) ../../zircon/system/ulib/async/task.cc:25 <platform-bus-x86.so>+0x967245 #21 0x000022e2aa1cd91e in λ(const driver_runtime::Dispatcher::post_task::(anon class)*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/dispatcher.cc:715 <libdriver_runtime.so>+0xed91e #22 0x000022e2aa1cd621 in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:714:7), true, false, void, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int>::invoke(void*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0xed621 #23 0x000022e2aa1a8482 in fit::internal::function_base<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int)>::invoke(const fit::internal::function_base<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int)>*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:505 <libdriver_runtime.so>+0xc8482 #24 0x000022e2aa1a80f8 in fit::callback_impl<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int)>::operator()(fit::callback_impl<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int)>*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/function.h:451 <libdriver_runtime.so>+0xc80f8 #25 0x000022e2aa17fc76 in driver_runtime::callback_request::Call(driver_runtime::callback_request*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/callback_request.h:67 <libdriver_runtime.so>+0x9fc76 #26 0x000022e2aa18c7ef in driver_runtime::Dispatcher::dispatch_callback(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >) ../../src/devices/bin/driver_runtime/dispatcher.cc:1093 <libdriver_runtime.so>+0xac7ef #27 0x000022e2aa18fd67 in driver_runtime::Dispatcher::dispatch_callbacks(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:1169 <libdriver_runtime.so>+0xafd67 #28 0x000022e2aa1bc9a2 in λ(const driver_runtime::Dispatcher::create_with_adder::(anon class)*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:338 <libdriver_runtime.so>+0xdc9a2 #29 0x000022e2aa1bc6d2 in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:337:7), true, false, void, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>>::invoke(void*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0xdc6d2 #30 0x000022e2aa1aa1e5 in fit::internal::function_base<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>)>::invoke(const fit::internal::function_base<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>)>*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:505 <libdriver_runtime.so>+0xca1e5 #31 0x000022e2aa1a9e32 in fit::function_impl<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>)>::operator()(const fit::function_impl<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>)>*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/function.h:300 <libdriver_runtime.so>+0xc9e32 #32 0x000022e2aa193444 in driver_runtime::Dispatcher::event_waiter::invoke_callback(driver_runtime::Dispatcher::event_waiter*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.h:299 <libdriver_runtime.so>+0xb3444 #33 0x000022e2aa192feb in driver_runtime::Dispatcher::event_waiter::handle_event(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/dispatcher.cc:1259 <libdriver_runtime.so>+0xb2feb #34 0x000022e2aa1bcf74 in async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event(async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>*, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/async_loop_owned_event_handler.h:59 <libdriver_runtime.so>+0xdcf74 #35 0x000022e2aa1bd1cb in async::wait_method<async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>, &async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event>::call_handler(async_dispatcher_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../zircon/system/ulib/async/include/lib/async/cpp/wait.h:201 <libdriver_runtime.so>+0xdd1cb #36 0x000022e2aa2303a9 in async_loop_dispatch_wait(async_loop_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../zircon/system/ulib/async-loop/loop.c:381 <libdriver_runtime.so>+0x1503a9 #37 0x000022e2aa229a82 in async_loop_run_once(async_loop_t*, zx_time_t) ../../zircon/system/ulib/async-loop/loop.c:330 <libdriver_runtime.so>+0x149a82 #38 0x000022e2aa229102 in async_loop_run(async_loop_t*, zx_time_t, _Bool) ../../zircon/system/ulib/async-loop/loop.c:288 <libdriver_runtime.so>+0x149102 #39 0x000022e2aa22aeb7 in async_loop_run_thread(void*) ../../zircon/system/ulib/async-loop/loop.c:840 <libdriver_runtime.so>+0x14aeb7 #40 0x000041a874980f1c in start_c11(void*) ../../zircon/third_party/ulib/musl/pthread/pthread_create.c:55 <libc.so>+0xd7f1c #41 0x000041a874aabe8d in thread_trampoline(uintptr_t, uintptr_t) ../../zircon/system/ulib/runtime/thread.cc:100 <libc.so>+0x202e8d Link: https://github.com/acpica/acpica/commit/c1470833 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Tamir Duberstein
|
05bb0167c8 |
ACPICA: Avoid undefined behavior: applying zero offset to null pointer
ACPICA commit 770653e3ba67c30a629ca7d12e352d83c2541b1e Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 #1.2 0x000020d0f660777f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f #1.1 0x000020d0f660777f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f #1 0x000020d0f660777f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f #2 0x000020d0f660b96d in handlepointer_overflow_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:809 <libclang_rt.asan.so>+0x4196d #3 0x000020d0f660b50d in compiler-rt/lib/ubsan/ubsan_handlers.cpp:815 <libclang_rt.asan.so>+0x4150d #4 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 #5 0x000021e4213e2369 in acpi_ds_call_control_method(struct acpi_thread_state*, struct acpi_walk_state*, union acpi_parse_object*) ../../third_party/acpica/source/components/dispatcher/dsmethod.c:605 <platform-bus-x86.so>+0x262369 #6 0x000021e421437fac in acpi_ps_parse_aml(struct acpi_walk_state*) ../../third_party/acpica/source/components/parser/psparse.c:550 <platform-bus-x86.so>+0x2b7fac #7 0x000021e4214464d2 in acpi_ps_execute_method(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/parser/psxface.c:244 <platform-bus-x86.so>+0x2c64d2 #8 0x000021e4213aa052 in acpi_ns_evaluate(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/namespace/nseval.c:250 <platform-bus-x86.so>+0x22a052 #9 0x000021e421413dd8 in acpi_ns_init_one_device(acpi_handle, u32, void*, void**) ../../third_party/acpica/source/components/namespace/nsinit.c:735 <platform-bus-x86.so>+0x293dd8 #10 0x000021e421429e98 in acpi_ns_walk_namespace(acpi_object_type, acpi_handle, u32, u32, acpi_walk_callback, acpi_walk_callback, void*, void**) ../../third_party/acpica/source/components/namespace/nswalk.c:298 <platform-bus-x86.so>+0x2a9e98 #11 0x000021e4214131ac in acpi_ns_initialize_devices(u32) ../../third_party/acpica/source/components/namespace/nsinit.c:268 <platform-bus-x86.so>+0x2931ac #12 0x000021e42147c40d in acpi_initialize_objects(u32) ../../third_party/acpica/source/components/utilities/utxfinit.c:304 <platform-bus-x86.so>+0x2fc40d #13 0x000021e42126d603 in acpi::acpi_impl::initialize_acpi(acpi::acpi_impl*) ../../src/devices/board/lib/acpi/acpi-impl.cc:224 <platform-bus-x86.so>+0xed603 Add a simple check that avoids incrementing a pointer by zero, but otherwise behaves as before. Note that our findings are against ACPICA 20221020, but the same code exists on master. Link: https://github.com/acpica/acpica/commit/770653e3 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Tamir Duberstein
|
d56ba92b0c |
ACPICA: Avoid undefined behavior: load of misaligned address
ACPICA commit 807665510f1ea71bbdc063c27782a1da56e8e10a Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x00002234800696e6 in acpi_tb_get_root_table_entry(u8*, u32) ../../third_party/acpica/source/components/tables/tbutils.c:231 <platform-bus-x86.so>+0x9106e6 #1.2 0x0000233d72c8777f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f #1.1 0x0000233d72c8777f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f #1 0x0000233d72c8777f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f #2 0x0000233d72c88385 in handletype_mismatch_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:137 <libclang_rt.asan.so>+0x3e385 #3 0x0000233d72c87ead in compiler-rt/lib/ubsan/ubsan_handlers.cpp:142 <libclang_rt.asan.so>+0x3dead #4 0x00002234800696e6 in acpi_tb_get_root_table_entry(u8*, u32) ../../third_party/acpica/source/components/tables/tbutils.c:231 <platform-bus-x86.so>+0x9106e6 #5 0x00002234800691dd in acpi_tb_parse_root_table(acpi_physical_address) ../../third_party/acpica/source/components/tables/tbutils.c:385 <platform-bus-x86.so>+0x9101dd #6 0x0000223480070b06 in acpi_initialize_tables(struct acpi_table_desc*, u32, u8) ../../third_party/acpica/source/components/tables/tbxface.c:160 <platform-bus-x86.so>+0x917b06 #7 0x000022347fb803b4 in acpi::acpi_impl::initialize_acpi(acpi::acpi_impl*) ../../src/devices/board/lib/acpi/acpi-impl.cc:200 <platform-bus-x86.so>+0x4273b4 #8 0x000022347fa30d14 in x86::X86::early_acpi_init(x86::X86*) ../../src/devices/board/drivers/x86/init.cc:34 <platform-bus-x86.so>+0x2d7d14 #9 0x000022347fa310cf in x86::X86::early_init(x86::X86*) ../../src/devices/board/drivers/x86/init.cc:43 <platform-bus-x86.so>+0x2d80cf #10 0x000022347fa79410 in x86::X86::Bind(x86::X86*) ../../src/devices/board/drivers/x86/x86.cc:144 <platform-bus-x86.so>+0x320410 #11 0x000022347fa78ec0 in x86::X86::create_and_bind(void*, zx_device_t*) ../../src/devices/board/drivers/x86/x86.cc:123 <platform-bus-x86.so>+0x31fec0 #12 0x000020dc8908502f in λ(const zx_driver::bind_op::(anon class)*) ../../src/devices/bin/driver_host/zx_driver.cc:36 <<application>>+0x41502f #13 0x000020dc89084e03 in fit::internal::target<(lambda at../../src/devices/bin/driver_host/zx_driver.cc:34:61), false, false, void>::invoke(void*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:181 <<application>>+0x414e03 #14 0x000020dc8935a930 in fit::internal::function_base<16UL, false, void()>::invoke(const fit::internal::function_base<16UL, false, void ()>*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:505 <<application>>+0x6ea930 #15 0x000020dc893e2f8a in fit::function_impl<16UL, false, void()>::operator()(const fit::function_impl<16UL, false, void ()>*) ../../sdk/lib/fit/include/lib/fit/function.h:300 <<application>>+0x772f8a #16 0x000020dc8948dec5 in async::internal::retained_task::Handler(async_dispatcher_t*, async_task_t*, zx_status_t) ../../zircon/system/ulib/async/task.cc:25 <<application>>+0x81dec5 #17 0x000023ab5abcf91e in λ(const driver_runtime::Dispatcher::post_task::(anon class)*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/dispatcher.cc:715 <libdriver_runtime.so>+0xed91e #18 0x000023ab5abcf621 in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:714:7), true, false, void, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int>::invoke(void*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0xed621 #19 0x000023ab5abaa482 in fit::internal::function_base<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int)>::invoke(const fit::internal::function_base<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int)>*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:505 <libdriver_runtime.so>+0xc8482 #20 0x000023ab5abaa0f8 in fit::callback_impl<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int)>::operator()(fit::callback_impl<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int)>*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/function.h:451 <libdriver_runtime.so>+0xc80f8 #21 0x000023ab5ab81c76 in driver_runtime::callback_request::Call(driver_runtime::callback_request*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/callback_request.h:67 <libdriver_runtime.so>+0x9fc76 #22 0x000023ab5ab8e7ef in driver_runtime::Dispatcher::dispatch_callback(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >) ../../src/devices/bin/driver_runtime/dispatcher.cc:1093 <libdriver_runtime.so>+0xac7ef #23 0x000023ab5ab91d67 in driver_runtime::Dispatcher::dispatch_callbacks(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:1169 <libdriver_runtime.so>+0xafd67 #24 0x000023ab5abbe9a2 in λ(const driver_runtime::Dispatcher::create_with_adder::(anon class)*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:338 <libdriver_runtime.so>+0xdc9a2 #25 0x000023ab5abbe6d2 in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:337:7), true, false, void, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>>::invoke(void*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0xdc6d2 #26 0x000023ab5abac1e5 in fit::internal::function_base<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>)>::invoke(const fit::internal::function_base<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>)>*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:505 <libdriver_runtime.so>+0xca1e5 #27 0x000023ab5ababe32 in fit::function_impl<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>)>::operator()(const fit::function_impl<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>)>*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/function.h:300 <libdriver_runtime.so>+0xc9e32 #28 0x000023ab5ab95444 in driver_runtime::Dispatcher::event_waiter::invoke_callback(driver_runtime::Dispatcher::event_waiter*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.h:299 <libdriver_runtime.so>+0xb3444 #29 0x000023ab5ab94feb in driver_runtime::Dispatcher::event_waiter::handle_event(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/dispatcher.cc:1259 <libdriver_runtime.so>+0xb2feb #30 0x000023ab5abbef74 in async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event(async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>*, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/async_loop_owned_event_handler.h:59 <libdriver_runtime.so>+0xdcf74 #31 0x000023ab5abbf1cb in async::wait_method<async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>, &async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event>::call_handler(async_dispatcher_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../zircon/system/ulib/async/include/lib/async/cpp/wait.h:201 <libdriver_runtime.so>+0xdd1cb #32 0x000023ab5ac323a9 in async_loop_dispatch_wait(async_loop_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../zircon/system/ulib/async-loop/loop.c:381 <libdriver_runtime.so>+0x1503a9 #33 0x000023ab5ac2ba82 in async_loop_run_once(async_loop_t*, zx_time_t) ../../zircon/system/ulib/async-loop/loop.c:330 <libdriver_runtime.so>+0x149a82 #34 0x000023ab5ac2b102 in async_loop_run(async_loop_t*, zx_time_t, _Bool) ../../zircon/system/ulib/async-loop/loop.c:288 <libdriver_runtime.so>+0x149102 #35 0x000023ab5ac2ceb7 in async_loop_run_thread(void*) ../../zircon/system/ulib/async-loop/loop.c:840 <libdriver_runtime.so>+0x14aeb7 #36 0x000040b3be411f1c in start_c11(void*) ../../zircon/third_party/ulib/musl/pthread/pthread_create.c:55 <libc.so>+0xd7f1c #37 0x000040b3be53ce8d in thread_trampoline(uintptr_t, uintptr_t) ../../zircon/system/ulib/runtime/thread.cc:100 <libc.so>+0x202e8d Link: https://github.com/acpica/acpica/commit/80766551 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Niyas Sait
|
520d4a0ee5 |
ACPICA: add support for ClockInput resource (v6.5)
ACPICA commit 661feab5ee01a34af95a389a18c82e79f1aba05a Link: https://github.com/acpica/acpica/commit/661feab5 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Bob Moore
|
612c293284 |
ACPICA: Update all copyrights/signons to 2023
ACPICA commit 25bddd1824b1e450829468a64bbdcb38074ba3d2 Copyright updates to 2023. Link: https://github.com/acpica/acpica/commit/25bddd18 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Pedro Falcato
|
9737ff46f7 |
ACPICA: acpisrc: Add missing tables to astable
ACPICA commit d4a2c93198cdd9c6f4a83798345851fee96d5ca5 Also renames struct acpi_data_table_mapping's struct to struct acpi_data_table_mapping, just so conversion goes smoothly. Link: https://github.com/acpica/acpica/commit/d4a2c931 Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Xiongfeng Wang
|
9db8a1c217 |
ACPICA: Add missing macro ACPI_FUNCTION_TRACE() for acpi_ns_repair_HID()
ACPICA commit 2d85f3d30cdf9ceeb516e76bdc3c5c5d1d9b9fea The following commit add function tracing macros for the namespace repiar mechanism. commit 87b8dba05b4cf8c111948327023c710e2b6b5a05 Add function trace macros to improve namespace debugging But it missed the trace macro for the entry of ns_repair_HID(). Let's add it. Link: https://github.com/acpica/acpica/commit/2d85f3d3 Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Hans de Goede
|
a5b2781dca |
ACPI: video: Add acpi_backlight=video quirk for Lenovo ThinkPad W530
The Lenovo ThinkPad W530 uses a nvidia k1000m GPU. When this gets used together with one of the older nvidia binary driver series (the latest series does not support it), then backlight control does not work. This is caused by commit |
||
|
Hans de Goede
|
2699107989 |
ACPI: video: Add acpi_backlight=video quirk for Apple iMac14,1 and iMac14,2
On the Apple iMac14,1 and iMac14,2 all-in-ones (monitors with builtin "PC")
the connection between the GPU and the panel is seen by the GPU driver as
regular DP instead of eDP, causing the GPU driver to never call
acpi_video_register_backlight().
(GPU drivers only call acpi_video_register_backlight() when an internal
panel is detected, to avoid non working acpi_video# devices getting
registered on desktops which unfortunately is a real issue.)
Fix the missing acpi_video# backlight device on these all-in-ones by
adding a acpi_backlight=video DMI quirk, so that video.ko will
immediately register the backlight device instead of waiting for
an acpi_video_register_backlight() call.
Fixes:
|
||
|
Hans de Goede
|
e506731c8f |
ACPI: video: Make acpi_backlight=video work independent from GPU driver
Commit |
||
|
Hans de Goede
|
78dfc9d1d1 |
ACPI: video: Add auto_detect arg to __acpi_video_get_backlight_type()
Allow callers of __acpi_video_get_backlight_type() to pass a pointer
to a bool which will get set to false if the backlight-type comes from
the cmdline or a DMI quirk and set to true if auto-detection was used.
And make __acpi_video_get_backlight_type() non static so that it can
be called directly outside of video_detect.c .
While at it turn the acpi_video_get_backlight_type() and
acpi_video_backlight_use_native() wrappers into static inline functions
in include/acpi/video.h, so that we need to export one less symbol.
Fixes:
|
||
|
Miquel Raynal
|
673aa1ed1c |
of: Rename of_modalias_node()
This helper does not produce a real modalias, but tries to get the "product" compatible part of the "vendor,product" compatibles only. It is far from creating a purely useful modalias string and does not seem to be used like that directly anyway, so let's try to give this helper a more meaningful name before moving there a real modalias helper (already existing under of/device.c). Also update the various documentations to refer to the strings as "aliases" rather than "modaliases" which has a real meaning in the Linux kernel. There is no functional change. Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Len Brown <lenb@kernel.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Sebastian Reichel <sre@kernel.org> Cc: Wolfram Sang <wsa@kernel.org> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Sebastian Reichel <sre@kernel.org> Link: https://lore.kernel.org/r/20230404172148.82422-9-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
cd8fe5b6db |
Merge 6.3-rc5 into driver-core-next
We need the fixes in here for testing, as well as the driver core changes for documentation updates to build on. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Rafael J. Wysocki
|
d4d8516624 | Merge back Intel thermal driver changes for 6.4-rc1. | ||
|
Jean-Philippe Brucker
|
47d2668418 |
ACPI: VIOT: Initialize the correct IOMMU fwspec
When setting up DMA for a PCI device, we need to initialize its
iommu_fwspec with all possible alias RIDs (such as PCI bridges). To do
this we use pci_for_each_dma_alias() which calls
viot_pci_dev_iommu_init(). This function incorrectly initializes the
fwspec of the bridge instead of the device being configured. Fix it by
passing the original device as context to pci_for_each_dma_alias().
Fixes:
|
||
|
Jiangshan Yi
|
0dc9a71557 |
ACPI: thermal: Replace ternary operator with min_t()
Modify the code in accordance with the coccicheck warning: drivers/acpi/thermal.c:422: WARNING opportunity for min(). min_t() macro is defined in include/linux/minmax.h. It avoids multiple evaluations of the arguments when non-constant and performs strict type-checking. Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn> [ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Armin Wolf
|
3bd554e03e |
ACPI: SBS: Fix handling of Smart Battery Selectors
The "Smart Battery Selector" standard says that when writing SelectorState (0x1), the nibbles which should not be modified need to be masked with 0xff. This is necessary since in contrast to a "Smart Battery Manager", the last three nibbles are writable. Failing to do so might trigger the following cycle: 1. Host accidentally changes power source of the system (3rd nibble) when selecting a battery. 2. Power source is invalid, Selector changes to another power source. 3. Selector notifies host that it changed the power source. 4. Host re-reads some batteries. 5. goto 1 for each re-read battery. This loop might also be entered when a battery which is not present is selected for SMBus access. In the end some workqueues fill up, which causes the system to lockup upon suspend/shutdown. Fix this by correctly masking the value to be written, and avoid selecting batteries which are absent. Tested on a Acer Travelmate 4002WLMi. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Armin Wolf
|
e5b492c6bb |
ACPI: EC: Fix oops when removing custom query handlers
When removing custom query handlers, the handler might still be used inside the EC query workqueue, causing a kernel oops if the module holding the callback function was already unloaded. Fix this by flushing the EC query workqueue when removing custom query handlers. Tested on a Acer Travelmate 4002WLMi Signed-off-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Armin Wolf
|
28f7b85895 |
ACPI: EC: Limit explicit removal of query handlers to custom query handlers
According to the ACPI spec part 5.6.4.1.2, EC query handlers discovered thru ACPI should not be removed when a driver removes his custom query handler. On the Acer Travelmate 4002WLMi for example, such a query handler is used as a fallback to handle the EC SMBus alert when no driver is present. Change acpi_ec_remove_query_handlers() so that only custom query handlers are removed then remove_all is false. Query handlers discovered thru ACPI will still get removed when remove_all is true, which happens on device removal. Also add a simple check to ensure that acpi_ec_add_query_handler() is always called with either handle or func being set, since custom query handlers are detected based whether handlers->func is set or not. Tested on a Acer Travelmate 4002WLMi. Signed-off-by: Armin Wolf <W_Armin@gmx.de> [ rjw: Comment adjustment ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Andy Shevchenko
|
dcf0c2e06a |
ACPI: SPCR: Amend indentation
1) Remove unnecessary blank lines. 2) Reformat one comment for consistency. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Andy Shevchenko
|
1fbd9029c8 |
ACPI: property: Refactor acpi_data_prop_read_single()
Refactor acpi_data_prop_read_single() for decreased indentation and better structure. No functional changes intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Shuai Xue
|
f1e65718ec |
ACPI: APEI: EINJ: warn on invalid argument when explicitly indicated by platform
OSPM executes an EXECUTE_OPERATION action to instruct the platform to begin the injection operation, then executes a GET_COMMAND_STATUS action to determine the status of the completed operation. The ACPI Specification documented error codes[1] are: 0 = Success (Linux #define EINJ_STATUS_SUCCESS) 1 = Unknown failure (Linux #define EINJ_STATUS_FAIL) 2 = Invalid Access (Linux #define EINJ_STATUS_INVAL) The original code report -EBUSY for both "Unknown Failure" and "Invalid Access" cases. Actually, firmware could do some platform dependent sanity checks and returns different error codes, e.g. "Invalid Access" to indicate to the user that the parameters they supplied cannot be used for injection. To this end, fix to return -EINVAL in the __einj_error_inject() error handling case instead of always -EBUSY, when explicitly indicated by the platform in the status of the completed operation. [1] ACPI Specification 6.5 18.6.1. Error Injection Table Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Kuppuswamy Sathyanarayanan
|
4f855dcead |
ACPI: sysfs: Enable ACPI sysfs support for CCEL records
The Confidential Computing Event Log (CCEL) table provides the address and length of the CCEL records area in UEFI reserved memory. To allow user space access to these records, expose a sysfs interface similar to the BERT table. More details about the CCEL table can be found in the ACPI specification r6.5 [1], sec 5.2.34. Link: https://uefi.org/specs/ACPI/6.5/05_ACPI_Software_Programming_Model.html#cc-event-log-acpi-table # [1] Co-developed-by: Haibo Xu <haibo1.xu@intel.com> Signed-off-by: Haibo Xu <haibo1.xu@intel.com> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Rafael J. Wysocki
|
c56610a869 |
ACPI: bus: Rework system-level device notification handling
For ACPI drivers that provide a ->notify() callback and set ACPI_DRIVER_ALL_NOTIFY_EVENTS in their flags, that callback can be invoked while either the ->add() or the ->remove() callback is running without any synchronization at the bus type level which is counter to the common-sense expectation that notification handling should only be enabled when the driver is actually bound to the device. As a result, if the driver is not careful enough, it's ->notify() callback may crash when it is invoked too early or too late [1]. This issue has been amplified by commit |
||
|
Rafael J. Wysocki
|
ce07727aff | Merge back thermal control material for 6.4-rc1. | ||
|
Linus Torvalds
|
fd3d06ff5f |
Thermal control fixes for 6.3-rc4
- Restore the thermal core behavior regarding zero-temperature trip
points to avoid a driver regression (Ido Schimmel).
- Fix a recent regression in the ACPI processor driver preventing it
from changing the number of CPU cooling device states exposed via
sysfs after the given CPU cooling device has been registered (Rafael
Wysocki).
-----BEGIN PGP SIGNATURE-----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=aBq5
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These address two recent regressions related to thermal control.
Specifics:
- Restore the thermal core behavior regarding zero-temperature trip
points to avoid a driver regression (Ido Schimmel)
- Fix a recent regression in the ACPI processor driver preventing it
from changing the number of CPU cooling device states exposed via
sysfs after the given CPU cooling device has been registered
(Rafael Wysocki)"
* tag 'thermal-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Restore behavior regarding invalid trip points
ACPI: processor: thermal: Update CPU cooling devices on cpufreq policy changes
thermal: core: Introduce thermal_cooling_device_update()
thermal: core: Introduce thermal_cooling_device_present()
ACPI: processor: Reorder acpi_processor_driver_init()
|
||
|
Rafael J. Wysocki
|
8dbfa057b3 |
Merge branch 'acpi-video'
Merge an ACPI backlight quirk for Acer Aspire 3830TG (Hans de Goede). * acpi-video: ACPI: video: Add backlight=native DMI quirk for Acer Aspire 3830TG |
||
|
Aymeric Wibo
|
2d0ab14634 |
ACPI: resource: Add Medion S17413 to IRQ override quirk
Add DMI info of the Medion S17413 (board M1xA) to the IRQ override quirk table. This fixes the keyboard not working on these laptops. Link: https://bugzilla.kernel.org/show_bug.cgi?id=213031 Signed-off-by: Aymeric Wibo <obiwac@gmail.com> [ rjw: Fixed up white space ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Greg Kroah-Hartman
|
af48ab8b39 |
ACPI: LPIT: move to use bus_get_dev_root()
Direct access to the struct bus_type dev_root pointer is going away soon so replace that with a call to bus_get_dev_root() instead, which is what it is there for. Cc: Len Brown <lenb@kernel.org> Cc: linux-acpi@vger.kernel.org Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20230322083646.2937580-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Andy Shevchenko
|
da30a34a0e |
ACPI: SPCR: Prefix error messages with FW_BUG
The table values that are not defined in the specification are considered non-fatal errors in the code. However, they are firmware bugs, so point this out in the messages by prefixing them with FW_BUG. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Roger Pau Monne
|
073828e954 |
ACPI: processor: Fix evaluating _PDC method when running as Xen dom0
In ACPI systems, the OS can direct power management, as opposed to the
firmware. This OS-directed Power Management is called OSPM. Part of
telling the firmware that the OS going to direct power management is
making ACPI "_PDC" (Processor Driver Capabilities) calls. These _PDC
methods must be evaluated for every processor object. If these _PDC
calls are not completed for every processor it can lead to
inconsistency and later failures in things like the CPU frequency
driver.
In a Xen system, the dom0 kernel is responsible for system-wide power
management. The dom0 kernel is in charge of OSPM. However, the
number of CPUs available to dom0 can be different than the number of
CPUs physically present on the system.
This leads to a problem: the dom0 kernel needs to evaluate _PDC for
all the processors, but it can't always see them.
In dom0 kernels, ignore the existing ACPI method for determining if a
processor is physically present because it might not be accurate.
Instead, ask the hypervisor for this information.
Fix this by introducing a custom function to use when running as Xen
dom0 in order to check whether a processor object matches a CPU that's
online. Such checking is done using the existing information fetched
by the Xen pCPU subsystem, extending it to also store the ACPI ID.
This ensures that _PDC method gets evaluated for all physically online
CPUs, regardless of the number of CPUs made available to dom0.
Fixes:
|
||
|
Rafael J. Wysocki
|
22c52fa515 |
ACPI: processor: thermal: Update CPU cooling devices on cpufreq policy changes
When a cpufreq policy appears or goes away, the CPU cooling devices for
the CPUs covered by that policy need to be updated so that the new
processor_get_max_state() value is stored as max_state and the
statistics in sysfs are rearranged for each of them.
Do that accordingly in acpi_thermal_cpufreq_init() and
acpi_thermal_cpufreq_exit().
Fixes: a365105c685c("thermal: sysfs: Reuse cdev->max_state")
Reported-by: Wang, Quanxian <quanxian.wang@intel.com>
Link: https://lore.kernel.org/linux-pm/53ec1f06f61c984100868926f282647e57ecfb2d.camel@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
|
||
|
Rafael J. Wysocki
|
c0e0421a60 |
ACPI: processor: Reorder acpi_processor_driver_init()
The cpufreq policy notifier in the ACPI processor driver may as
well be registered before the driver itself, which causes
acpi_processor_cpufreq_init to be true (unless the notifier
registration fails, which is unlikely at that point) when the
ACPI CPU thermal cooling devices are registered, so the
processor_get_max_state() result does not change while
acpi_processor_driver_init() is running.
Change the ordering in acpi_processor_driver_init() accordingly
to prevent the max_state value from remaining 0 permanently for all
ACPI CPU cooling devices due to setting acpi_processor_cpufreq_init
too late. [Note that processor_get_max_state() may still return
different values at different times after this change, depending on
the cpufreq driver registration time, but that issue needs to be
addressed separately.]
Fixes: a365105c685c("thermal: sysfs: Reuse cdev->max_state")
Reported-by: Wang, Quanxian <quanxian.wang@intel.com>
Link: https://lore.kernel.org/linux-pm/53ec1f06f61c984100868926f282647e57ecfb2d.camel@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
|
||
|
Hans de Goede
|
5e7a3bf65d |
ACPI: video: Add backlight=native DMI quirk for Acer Aspire 3830TG
The Acer Aspire 3830TG predates Windows 8, so it defaults to using acpi_video# for backlight control, but this is non functional on this model. Add a DMI quirk to use the native backlight interface which does work properly. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Petr Pavlu
|
691a637123 |
ACPI: cpufreq: Use platform devices to load ACPI PPC and PCC drivers
The acpi-cpufreq and pcc-cpufreq drivers are loaded through per-CPU
module aliases. This can result in many unnecessary load requests during
boot if another frequency module, such as intel_pstate, is already
active. For instance, on a typical Intel system, one can observe that
udev makes 2x#CPUs attempts to insert acpi_cpufreq and 1x#CPUs attempts
for pcc_cpufreq. All these tries then fail if another frequency module
is already registered.
In the worst case, without the recent fix in commit
|
||
|
Tony Luck
|
fe6603cafa |
ACPI: APEI: EINJ: Add CXL error types
ACPI 6.5 added six new error types for CXL. See chapter 18 table 18.30. Add strings for the new types so that Linux will list them in the /sys/kernel/debug/apei/einj/available_error_types file. It seems no other changes are needed. Linux already accepts the CXL codes (on a BIOS that advertises them). Signed-off-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Simon Gaiser
|
f2cba54a7f |
ACPI: s2idle: Log when enabling wakeup IRQ fails
enable_irq_wake() can fail. Previously acpi_s2idle_prepare() silently ignored it's return code. Based on [1] we should try to continue even in case of an error, so just log a warning for now. Discovered when trying to go into s2idle under Xen. This leads to a system that can't be woken, since xen-pirq currently doesn't support setting wakeup IRQs [2]. With this you get at least some helpful log message if you have access to console messages. Link: https://lore.kernel.org/linux-acpi/20230313125344.2893-1-simon@invisiblethingslab.com/ # v1 Link: https://lore.kernel.org/linux-acpi/CAJZ5v0jahjt58nP6P5+xRdtD_ndYPvq4ecMVz6nfGu9tf5iaUw@mail.gmail.com/ # [1] Link: https://lore.kernel.org/xen-devel/20230313134102.3157-1-simon@invisiblethingslab.com/ # [2] Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com> [ rjw: Adjust white space ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Kang Chen
|
4dea41775d |
ACPI: processor: Check for null return of devm_kzalloc() in fch_misc_setup()
devm_kzalloc() may fail, clk_data->name might be NULL and will cause a NULL pointer dereference later. Signed-off-by: Kang Chen <void0red@gmail.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Wyes Karny
|
c984f5d5d4 |
ACPI: CPPC: Add auto select register read/write support
For some AMD shared memory based systems, the autonomous selection bit needed to be set explicitly. Add autonomous selection register related APIs to acpi driver, which amd_pstate driver uses later. Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Wyes Karny <wyes.karny@amd.com> [ rjw: Fixed up kerneldoc comments, white space adjustment, subject edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Wyes Karny
|
76531df5e1 |
ACPI: CPPC: Add min and max perf register writing support
Currently writing of min and max perf register is deferred in cppc_set_perf function. In CPPC guided mode, these registers needed to be written to guide the platform about min and max perf levels. Add this support to make guided mode work properly on AMD shared memory systems. Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Wyes Karny <wyes.karny@amd.com> [ rjw: Fixed up a multiline comment, subject edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Rafael J. Wysocki
|
f36cc6cd65 |
Merge branches 'acpi-video', 'acpi-x86', 'acpi-tools' and 'acpi-docs'
Merge a new ACPI backlight quirk, new ACPI quirks for I2C device enumeration on some platforms, a pfrut utility fix and an ACPI documentation fix for 6.3-rc3: - Add backlight=native DMI quirk for Dell Vostro 15 3535 to the ACPI video driver (Chia-Lin Kao). - Add ACPI quirks for I2C devices enumeration on Lenovo Yoga Book X90 and Acer Iconia One 7 B1-750 (Hans de Goede). - Fix handling of invalid command line option values in the ACPI pfrut utility (Chen Yu). - Fix references to I2C device data type in the ACPI documentation for device enumeration (Andy Shevchenko). * acpi-video: ACPI: video: Add backlight=native DMI quirk for Dell Vostro 15 3535 * acpi-x86: ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Book X90 ACPI: x86: Add skip i2c clients quirk for Acer Iconia One 7 B1-750 ACPI: x86: Introduce an acpi_quirk_skip_gpio_event_handlers() helper * acpi-tools: ACPI: tools: pfrut: Check if the input of level and type is in the right numeric range * acpi-docs: ACPI: docs: enumeration: Correct reference to the I²C device data type |
||
|
Sudeep Holla
|
91d7b60a65 |
ACPI: PPTT: Fix to avoid sleep in the atomic context when PPTT is absent
Commit |
||
|
Hans de Goede
|
1a1e7540cf |
ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Book X90
The Lenovo Yoga Book X90 is a x86 tablet which ships with Android x86 as factory OS. The Android x86 kernel fork ignores I2C devices described in the DSDT, except for the PMIC and Audio codecs. As usual the Lenovo Yoga Book X90's DSDT contains a bunch of extra I2C devices which are not actually there, causing various resource conflicts. Add an ACPI_QUIRK_SKIP_I2C_CLIENTS quirk for the Lenovo Yoga Book X90 to the acpi_quirk_skip_dmi_ids table to woraround this. The DSDT also contains broken ACPI GPIO event handlers, disable those too. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net> |
||
|
Hans de Goede
|
a5cb0695c5 |
ACPI: x86: Add skip i2c clients quirk for Acer Iconia One 7 B1-750
The Acer Iconia One 7 B1-750 is a x86 tablet which ships with Android x86 as factory OS. The Android x86 kernel fork ignores I2C devices described in the DSDT, except for the PMIC and Audio codecs. As usual the Acer Iconia One 7 B1-750's DSDT contains a bunch of extra I2C devices which are not actually there, causing various resource conflicts. Add an ACPI_QUIRK_SKIP_I2C_CLIENTS quirk for the Acer Iconia One 7 B1-750 to the acpi_quirk_skip_dmi_ids table to woraround this. The DSDT also contains broken ACPI GPIO event handlers, disable those too. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net> |
||
|
Hans de Goede
|
5adc409340 |
ACPI: x86: Introduce an acpi_quirk_skip_gpio_event_handlers() helper
x86 ACPI boards which ship with only Android as their factory image usually have pretty broken ACPI tables, relying on everything being hardcoded in the factory kernel image and often disabling parts of the ACPI enumeration kernel code to avoid the broken tables causing issues. Part of this broken ACPI code is that sometimes these boards have _AEI ACPI GPIO event handlers which are broken. So far this has been dealt with in the platform/x86/x86-android-tablets.c module, which contains various workarounds for these devices, by it calling acpi_gpiochip_free_interrupts() on gpiochip-s with troublesome handlers to disable the handlers. But in some cases this is too late, if the handlers are of the edge type then gpiolib-acpi.c's code will already have run them at boot. This can cause issues such as GPIOs ending up as owned by "ACPI:OpRegion", making them unavailable for drivers which actually need them. Boards with these broken ACPI tables are already listed in drivers/acpi/x86/utils.c for e.g. acpi_quirk_skip_i2c_client_enumeration(). Extend the quirks mechanism for a new acpi_quirk_skip_gpio_event_handlers() helper, this re-uses the DMI-ids rather then having to duplicate the same DMI table in gpiolib-acpi.c . Also add the new ACPI_QUIRK_SKIP_GPIO_EVENT_HANDLERS quirk to existing boards with troublesome ACPI gpio event handlers, so that the current acpi_gpiochip_free_interrupts() hack can be removed from x86-android-tablets.c . Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net> |
||
|
Chia-Lin Kao (AceLan)
|
89b0411481 |
ACPI: video: Add backlight=native DMI quirk for Dell Vostro 15 3535
Sometimes the system boots up with a acpi_video0 backlight interface which doesn't work. So add Dell Vostro 15 3535 into the video_detect_dmi_table to set it to native explicitly. Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com> Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net> |
||
|
Daniel Lezcano
|
3034f859b9 |
thermal: Add a thermal zone id accessor
In order to get the thermal zone id but without directly accessing the thermal zone device structure, add an accessor. Use the accessor in the hwmon_scmi and acpi_thermal. No functional change intented. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Daniel Lezcano
|
3d4e1bad78 |
thermal/core: Use the thermal zone 'devdata' accessor in remaining drivers
The thermal zone device structure is exposed to the different drivers and obviously they access the internals while that should be restricted to the core thermal code. In order to self-encapsulate the thermal core code, we need to prevent the drivers accessing directly the thermal zone structure and provide accessor functions to deal with. Use the devdata accessor introduced in the previous patch. No functional changes intended. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> #mlxsw Acked-by: Gregory Greenman <gregory.greenman@intel.com> #iwlwifi Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> #power_supply Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> #ahci Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Linus Torvalds
|
44b6f565e7 |
More ACPI updates for 6.3-rc1
- Add an ACPI IRQ override quirk for Asus Expertbook B2402FBA (Vojtech
Hejsek).
- Drop a suspend-to-idle quirk for HP Elitebook G9 that is not needed
any more after a firmware update (Mario Limonciello).
- Add all Cezanne systems to the list for forcing StorageD3Enable,
because they all need the same quirk (Mario Limonciello).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmQCNtISHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxYDIP/j8D71rA8caGRsIBOA46+V2449Viaf/v
2x9y/cW/g6UOkKN90t3eqNENX78H8eE3LLneCKwT2r/AAHRMzvtuzYe5IhAFvc9l
iU1knKhdVS/RJU0ir/uE4eeh0OwkL28W8NttsM1lSRuRZ0PTL1a6SCXmIs0qeN3K
RQRJw42FMhiWz7tVGz+Xqoko3IiEh6Ci/40Km5VHUjrdYcoO8Ew01XSxUjB+SbJj
giUGSuGfnGXrDUqLU7GnceS0cXm7iYeujpaws4vgsxKNzt5KvPlQ+xJjXe4q4pU/
vrqRd+xsNn4getHlxZiFzjG0t1w4L42bc4j/Xnr5MnZ1GoRs1fO4lNJjkHniBB+z
d/ROggg+jm3TwoFfWEZ7r4s6WhnfSyzADnqPP5h489RPtAbAFCdNkEvVFs0MZZT5
xJavVXaaLjmC9Nx+XpGa8/4Hf+7dQwtO/ts0S9Rmcxf90TDbqTaic8vNEw9M0Fed
aONjuCyxZMwjbpn6g+KuFzgS4KjSMBRmrLgD3Z+P4QJ1P5hRaK4yZRP2rHeELosK
gTP8QBEXrj2N5I4SnlSzj6AGw5LHiEI2crDFLzZjAUUMdCDo9R1N63Zfpcf6INHi
1+GCfO/jlTTUbGT0+NRaqCLWSuMeTnfKO5Beow4FsOIUuOLpDHl3bAir5YrtwNS+
iHMhDzp00rRs
=D8xL
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These update ACPI quirks for some x86 platforms and add an IRQ
override quirk for one more system.
Specifics:
- Add an ACPI IRQ override quirk for Asus Expertbook B2402FBA
(Vojtech Hejsek)
- Drop a suspend-to-idle quirk for HP Elitebook G9 that is not needed
any more after a firmware update (Mario Limonciello)
- Add all Cezanne systems to the list for forcing StorageD3Enable,
because they all need the same quirk (Mario Limonciello)"
* tag 'acpi-6.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: x86: utils: Add Cezanne to the list for forcing StorageD3Enable
ACPI: x86: Drop quirk for HP Elitebook
ACPI: resource: Skip IRQ override on Asus Expertbook B2402FBA
|
||
|
Rafael J. Wysocki
|
57b76324c2 |
Merge branches 'acpi-pm' and 'acpi-x86'
Merge additional ACPI quirks for x86 systems: - Drop a suspend-to-idle quirk for HP Elitebook G9 that is not needed any more after a firmware update (Mario Limonciello). - Add all Cezanne systems to the list for forcing StorageD3Enable, because they all need the same quirk (Mario Limonciello). * acpi-pm: ACPI: x86: Drop quirk for HP Elitebook * acpi-x86: ACPI: x86: utils: Add Cezanne to the list for forcing StorageD3Enable |
||
|
Mario Limonciello
|
e2a5636448 |
ACPI: x86: utils: Add Cezanne to the list for forcing StorageD3Enable
commit
|
||
|
Mario Limonciello
|
e32d546c48 |
ACPI: x86: Drop quirk for HP Elitebook
There was a quirk in `acpi/x86/s2idle.c` for an HP Elitebook G9 platforms to force AMD GUID codepath instead of Microsoft codepath. This was due to a bug with WCN6855 WLAN firmware interaction with the system. This bug is fixed by WCN6855 firmware: WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Remove the quirk as it's no longer necessary with this firmware. Link: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/commit/?id=c7a57ef688f7d99d8338a5d8edddc8836ff0e6de Tested-by: Anson Tsao <anson.tsao@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Linus Torvalds
|
7c3dc440b1 |
cxl for v6.3
- CXL RAM region enumeration: instantiate 'struct cxl_region' objects
for platform firmware created memory regions
- CXL RAM region provisioning: complement the existing PMEM region
creation support with RAM region support
- "Soft Reservation" policy change: Online (memory hot-add)
soft-reserved memory (EFI_MEMORY_SP) by default, but still allow for
setting aside such memory for dedicated access via device-dax.
- CXL Events and Interrupts: Takeover CXL event handling from
platform-firmware (ACPI calls this CXL Memory Error Reporting) and
export CXL Events via Linux Trace Events.
- Convey CXL _OSC results to drivers: Similar to PCI, let the CXL
subsystem interrogate the result of CXL _OSC negotiation.
- Emulate CXL DVSEC Range Registers as "decoders": Allow for
first-generation devices that pre-date the definition of the CXL HDM
Decoder Capability to translate the CXL DVSEC Range Registers into
'struct cxl_decoder' objects.
- Set timestamp: Per spec, set the device timestamp in case of hotplug,
or if platform-firwmare failed to set it.
- General fixups: linux-next build issues, non-urgent fixes for
pre-production hardware, unit test fixes, spelling and debug message
improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCY/WYcgAKCRDfioYZHlFs
Z6m3APkBUtiEEm1o8ikdu5llUS1OTLBwqjJDwGMTyf8X/WDXhgD+J2mLsCgARS7X
5IS0RAtefutrW5sQpUucPM7QiLuraAY=
=kOXC
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) updates from Dan Williams:
"To date Linux has been dependent on platform-firmware to map CXL RAM
regions and handle events / errors from devices. With this update we
can now parse / update the CXL memory layout, and report events /
errors from devices. This is a precursor for the CXL subsystem to
handle the end-to-end "RAS" flow for CXL memory. i.e. the flow that
for DDR-attached-DRAM is handled by the EDAC driver where it maps
system physical address events to a field-replaceable-unit (FRU /
endpoint device). In general, CXL has the potential to standardize
what has historically been a pile of memory-controller-specific error
handling logic.
Another change of note is the default policy for handling RAM-backed
device-dax instances. Previously the default access mode was "device",
mmap(2) a device special file to access memory. The new default is
"kmem" where the address range is assigned to the core-mm via
add_memory_driver_managed(). This saves typical users from wondering
why their platform memory is not visible via free(1) and stuck behind
a device-file. At the same time it allows expert users to deploy
policy to, for example, get dedicated access to high performance
memory, or hide low performance memory from general purpose kernel
allocations. This affects not only CXL, but also systems with
high-bandwidth-memory that platform-firmware tags with the
EFI_MEMORY_SP (special purpose) designation.
Summary:
- CXL RAM region enumeration: instantiate 'struct cxl_region' objects
for platform firmware created memory regions
- CXL RAM region provisioning: complement the existing PMEM region
creation support with RAM region support
- "Soft Reservation" policy change: Online (memory hot-add)
soft-reserved memory (EFI_MEMORY_SP) by default, but still allow
for setting aside such memory for dedicated access via device-dax.
- CXL Events and Interrupts: Takeover CXL event handling from
platform-firmware (ACPI calls this CXL Memory Error Reporting) and
export CXL Events via Linux Trace Events.
- Convey CXL _OSC results to drivers: Similar to PCI, let the CXL
subsystem interrogate the result of CXL _OSC negotiation.
- Emulate CXL DVSEC Range Registers as "decoders": Allow for
first-generation devices that pre-date the definition of the CXL
HDM Decoder Capability to translate the CXL DVSEC Range Registers
into 'struct cxl_decoder' objects.
- Set timestamp: Per spec, set the device timestamp in case of
hotplug, or if platform-firwmare failed to set it.
- General fixups: linux-next build issues, non-urgent fixes for
pre-production hardware, unit test fixes, spelling and debug
message improvements"
* tag 'cxl-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (66 commits)
dax/kmem: Fix leak of memory-hotplug resources
cxl/mem: Add kdoc param for event log driver state
cxl/trace: Add serial number to trace points
cxl/trace: Add host output to trace points
cxl/trace: Standardize device information output
cxl/pci: Remove locked check for dvsec_range_allowed()
cxl/hdm: Add emulation when HDM decoders are not committed
cxl/hdm: Create emulated cxl_hdm for devices that do not have HDM decoders
cxl/hdm: Emulate HDM decoder from DVSEC range registers
cxl/pci: Refactor cxl_hdm_decode_init()
cxl/port: Export cxl_dvsec_rr_decode() to cxl_port
cxl/pci: Break out range register decoding from cxl_hdm_decode_init()
cxl: add RAS status unmasking for CXL
cxl: remove unnecessary calling of pci_enable_pcie_error_reporting()
dax/hmem: build hmem device support as module if possible
dax: cxl: add CXL_REGION dependency
cxl: avoid returning uninitialized error code
cxl/pmem: Fix nvdimm registration races
cxl/mem: Fix UAPI command comment
cxl/uapi: Tag commands from cxl_query_cmd()
...
|
||
|
Linus Torvalds
|
90ddb3f034 |
pci-v6.3-changes
-----BEGIN PGP SIGNATURE-----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=/y4d
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Rework portdrv shutdown so it disables interrupts but doesn't
disable bus mastering, which leads to hangs on Loongson LS7A
- Add mechanism to prevent Max_Read_Request_Size (MRRS) increases,
again to avoid hardware issues on Loongson LS7A (and likely other
devices based on DesignWare IP)
- Ignore devices with a firmware (DT or ACPI) node that says the
device is disabled
Resource management:
- Distribute spare resources to unconfigured hotplug bridges at
boot-time (not just when hot-adding such a bridge), which makes
hot-adding devices to docks work better. Tried this in v6.1 but had
to revert for regressions, so try again
- Fix root bus issue that dropped resources that happened to end
at 0, e.g., [bus 00]
PCI device hotplug:
- Remove device locking when marking device as disconnected so this
doesn't have to wait for concurrent driver bind/unbind to complete
- Quirk more Qualcomm bridges that don't fully implement the PCIe
Slot Status 'Command Completed' bit
Power management:
- Account for _S0W of the target bridge in acpi_pci_bridge_d3() so we
don't miss hot-add notifications for USB4 docks, Thunderbolt, etc
Reset:
- Observe delay after reset, e.g., resuming from system sleep,
regardless of whether a bridge can suspend to D3cold at runtime
- Wait for secondary bus to become ready after a bridge reset
Virtualization:
- Avoid FLR on some AMD FCH AHCI adapters where it doesn't work
- Allow independent IOMMU groups for some Wangxun NICs that prevent
peer-to-peer transactions but don't advertise an ACS Capability
Error handling:
- Configure End-to-End-CRC (ECRC) only if Linux owns the AER
Capability
- Remove redundant Device Control Error Reporting Enable in the AER
service driver since this is already done for all devices during
enumeration
ASPM:
- Add pci_enable_link_state() interface to allow drivers to enable
ASPM link state
Endpoint framework:
- Move dra7xx and tegra194 linkup processing from hard IRQ to
threaded IRQ handler
- Add a separate lock for endpoint controller list of endpoint
function drivers to prevent deadlock in callbacks
- Pass events from endpoint controller to endpoint function drivers
via callbacks instead of notifiers
Synopsys DesignWare eDMA controller driver (acked by Vinod):
- Fix CPU vs PCI address issues
- Fix source vs destination address issues
- Fix issues with interleaved transfer semantics
- Fix channel count initialization issue (issue still exists in
several other drivers)
- Clean up and improve debugfs usage so it will work on platforms
with several eDMA devices
Baikal T-1 PCIe controller driver:
- Set a 64-bit DMA mask
Freescale i.MX6 PCIe controller driver:
- Add i.MX8MM, i.MX8MQ, i.MX8MP endpoint mode DT binding and driver
support
Intel VMD host bridge driver:
- Add quirk to configure PCIe ASPM and LTR. This is normally done by
BIOS, and will be for future products
Marvell MVEBU PCIe controller driver:
- Mark this driver as broken in Kconfig since bugs prevent its daily
usage
MediaTek MT7621 PCIe controller driver:
- Delay PHY port initialization to improve boot reliability for ZBT
WE1326, ZBT WF3526-P, and some Netgear models
Qualcomm PCIe controller driver:
- Add MSM8998 DT compatible string
- Unify MSM8996 and MSM8998 clock orderings
- Add SM8350 DT binding and driver support
- Add IPQ8074 Gen3 DT binding and driver support
- Correct qcom,perst-regs in DT binding
- Add qcom_pcie_host_deinit() so the PHY is powered off and
regulators and clocks are disabled on late host-init errors
Socionext UniPhier Pro5 controller driver:
- Clean up uniphier-ep reg, clocks, resets, and their names in DT
binding
Synopsys DesignWare PCIe controller driver:
- Restrict coherent DMA mask to 32 bits for MSI, but allow controller
drivers to set 64-bit streaming DMA mask
- Add eDMA engine support in both Root Port and Endpoint controllers
Miscellaneous:
- Remove MODULE_LICENSE from boolean drivers so they don't look like
modules so modprobe can complain about them"
* tag 'pci-v6.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (86 commits)
PCI: dwc: Add Root Port and Endpoint controller eDMA engine support
PCI: bt1: Set 64-bit DMA mask
PCI: dwc: Restrict only coherent DMA mask for MSI address allocation
dmaengine: dw-edma: Prepare dw_edma_probe() for builtin callers
dmaengine: dw-edma: Depend on DW_EDMA instead of selecting it
dmaengine: dw-edma: Add mem-mapped LL-entries support
PCI: Remove MODULE_LICENSE so boolean drivers don't look like modules
PCI: hv: Drop duplicate PCI_MSI dependency
PCI/P2PDMA: Annotate RCU dereference
PCI/sysfs: Constify struct kobj_type pci_slot_ktype
PCI: hotplug: Allow marking devices as disconnected during bind/unbind
PCI: pciehp: Add Qualcomm quirk for Command Completed erratum
PCI: qcom: Add IPQ8074 Gen3 port support
dt-bindings: PCI: qcom: Add IPQ8074 Gen3 port
dt-bindings: PCI: qcom: Sort compatibles alphabetically
PCI: qcom: Fix host-init error handling
PCI: qcom: Add SM8350 support
dt-bindings: PCI: qcom: Add SM8350
dt-bindings: PCI: qcom-ep: Correct qcom,perst-regs
dt-bindings: PCI: qcom: Unify MSM8996 and MSM8998 clock order
...
|
||
|
Linus Torvalds
|
a93e884edf |
Driver core changes for 6.3-rc1
Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work falls
into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be moved
into read-only memory (i.e. const) The recent work with Rust has
pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only making
things safer overall. This is the contuation of that work (started
last release with kobject changes) in moving struct bus_type to be
constant. We didn't quite make it for this release, but the
remaining patches will be finished up for the release after this
one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/ipdg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynL3gCgwzbcWu0So3piZyLiJKxsVo9C2EsAn3sZ9gN6
6oeFOjD3JDju3cQsfGgd
=Su6W
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work
falls into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be
moved into read-only memory (i.e. const) The recent work with Rust
has pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only
making things safer overall. This is the contuation of that work
(started last release with kobject changes) in moving struct
bus_type to be constant. We didn't quite make it for this release,
but the remaining patches will be finished up for the release after
this one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems"
[ Geert Uytterhoeven points out that that last sentence isn't true, and
that there's a pending report that has a fix that is queued up - Linus ]
* tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits)
debugfs: drop inline constant formatting for ERR_PTR(-ERROR)
OPP: fix error checking in opp_migrate_dentry()
debugfs: update comment of debugfs_rename()
i3c: fix device.h kernel-doc warnings
dma-mapping: no need to pass a bus_type into get_arch_dma_ops()
driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place
Revert "driver core: add error handling for devtmpfs_create_node()"
Revert "devtmpfs: add debug info to handle()"
Revert "devtmpfs: remove return value of devtmpfs_delete_node()"
driver core: cpu: don't hand-override the uevent bus_type callback.
devtmpfs: remove return value of devtmpfs_delete_node()
devtmpfs: add debug info to handle()
driver core: add error handling for devtmpfs_create_node()
driver core: bus: update my copyright notice
driver core: bus: add bus_get_dev_root() function
driver core: bus: constify bus_unregister()
driver core: bus: constify some internal functions
driver core: bus: constify bus_get_kset()
driver core: bus: constify bus_register/unregister_notifier()
driver core: remove private pointer from struct bus_type
...
|
||
|
Linus Torvalds
|
3822a7c409 |
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()") which
does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter". These filters provide users
with finer-grained control over DAMOS's actions. SeongJae has also done
some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series "mm:
support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with swap
PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with his
series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings. The previous BPF-based approach had
shortcomings. See "mm: In-kernel support for memory-deny-write-execute
(MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a per-node
basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage during
compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in ths
series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's series
"mm, arch: add generic implementation of pfn_valid() for FLATMEM" and
"fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest of
the kernel in the series "Simplify the external interface for GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the series
"mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY/PoPQAKCRDdBJ7gKXxA
jlvpAPsFECUBBl20qSue2zCYWnHC7Yk4q9ytTkPB/MMDrFEN9wD/SNKEm2UoK6/K
DmxHkn0LAitGgJRS/W9w81yrgig9tAQ=
=MlGs
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
|
||
|
Vojtech Hejsek
|
65eb2867f5 |
ACPI: resource: Skip IRQ override on Asus Expertbook B2402FBA
The Asus Expertbook B2502FBA has IRQ 1 described as Active_Low in its ACPI table. However, the kernel overrides this and sets it to Edge_High, which prevents the internal keyboard from working properly. Adding this laptop model to the override_table fixes the issue. Signed-off-by: Vojtech Hejsek <hejsekvojtech@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Linus Torvalds
|
8bf1a529cd |
arm64 updates for 6.3:
- Support for arm64 SME 2 and 2.1. SME2 introduces a new 512-bit architectural register (ZT0, for the look-up table feature) that Linux needs to save/restore. - Include TPIDR2 in the signal context and add the corresponding kselftests. - Perf updates: Arm SPEv1.2 support, HiSilicon uncore PMU updates, ACPI support to the Marvell DDR and TAD PMU drivers, reset DTM_PMU_CONFIG (ARM CMN) at probe time. - Support for DYNAMIC_FTRACE_WITH_CALL_OPS on arm64. - Permit EFI boot with MMU and caches on. Instead of cleaning the entire loaded kernel image to the PoC and disabling the MMU and caches before branching to the kernel bare metal entry point, leave the MMU and caches enabled and rely on EFI's cacheable 1:1 mapping of all of system RAM to populate the initial page tables. - Expose the AArch32 (compat) ELF_HWCAP features to user in an arm64 kernel (the arm32 kernel only defines the values). - Harden the arm64 shadow call stack pointer handling: stash the shadow stack pointer in the task struct on interrupt, load it directly from this structure. - Signal handling cleanups to remove redundant validation of size information and avoid reading the same data from userspace twice. - Refactor the hwcap macros to make use of the automatically generated ID registers. It should make new hwcaps writing less error prone. - Further arm64 sysreg conversion and some fixes. - arm64 kselftest fixes and improvements. - Pointer authentication cleanups: don't sign leaf functions, unify asm-arch manipulation. - Pseudo-NMI code generation optimisations. - Minor fixes for SME and TPIDR2 handling. - Miscellaneous updates: ARCH_FORCE_MAX_ORDER is now selectable, replace strtobool() to kstrtobool() in the cpufeature.c code, apply dynamic shadow call stack in two passes, intercept pfn changes in set_pte_at() without the required break-before-make sequence, attempt to dump all instructions on unhandled kernel faults. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAmP0/QsACgkQa9axLQDI XvG+gA/+JDVEH9wRzAIZvbp9hSuohPc48xgAmIMP1eiVB0/5qeRjYAJwS33H0rXS BPC2kj9IBy/eQeM9ICg0nFd0zYznSVacITqe6NrqeJ1F+ftS4rrHdfxd+J7kIoCs V2L8e+BJvmHdhmNV2qMAgJdGlfxfQBA7fv2cy52HKYcouoOh1AUVR/x+yXVXAsCd qJP3+dlUKccgm/oc5unEC1eZ49u8O+EoasqOyfG6K5udMgzhEX3K6imT9J3hw0WT UjstYkx5uGS/prUrRCQAX96VCHoZmzEDKtQuHkHvQXEYXsYPF3ldbR2CziNJnHe7 QfSkjJlt8HAtExA+BkwEe9i0MQO/2VF5qsa2e4fA6l7uqGu3LOtS/jJd23C9n9fR Id8aBMeN6S8+MjqRA9L2uf4t6e4ISEHoG9ZRdc4WOwloxEEiJoIeun+7bHdOSZLj AFdHFCz4NXiiwC0UP0xPDI2YeCLqt5np7HmnrUqwzRpVO8UUagiJD8TIpcBSjBN9 J68eidenHUW7/SlIeaMKE2lmo8AUEAJs9AorDSugF19/ThJcQdx7vT2UAZjeVB3j 1dbbwajnlDOk/w8PQC4thFp5/MDlfst0htS3WRwa+vgkweE2EAdTU4hUZ8qEP7FQ smhYtlT1xUSTYDTqoaG/U2OWR6/UU79wP0jgcOsHXTuyYrtPI/Q= =VmXL -----END PGP SIGNATURE----- Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - Support for arm64 SME 2 and 2.1. SME2 introduces a new 512-bit architectural register (ZT0, for the look-up table feature) that Linux needs to save/restore - Include TPIDR2 in the signal context and add the corresponding kselftests - Perf updates: Arm SPEv1.2 support, HiSilicon uncore PMU updates, ACPI support to the Marvell DDR and TAD PMU drivers, reset DTM_PMU_CONFIG (ARM CMN) at probe time - Support for DYNAMIC_FTRACE_WITH_CALL_OPS on arm64 - Permit EFI boot with MMU and caches on. Instead of cleaning the entire loaded kernel image to the PoC and disabling the MMU and caches before branching to the kernel bare metal entry point, leave the MMU and caches enabled and rely on EFI's cacheable 1:1 mapping of all of system RAM to populate the initial page tables - Expose the AArch32 (compat) ELF_HWCAP features to user in an arm64 kernel (the arm32 kernel only defines the values) - Harden the arm64 shadow call stack pointer handling: stash the shadow stack pointer in the task struct on interrupt, load it directly from this structure - Signal handling cleanups to remove redundant validation of size information and avoid reading the same data from userspace twice - Refactor the hwcap macros to make use of the automatically generated ID registers. It should make new hwcaps writing less error prone - Further arm64 sysreg conversion and some fixes - arm64 kselftest fixes and improvements - Pointer authentication cleanups: don't sign leaf functions, unify asm-arch manipulation - Pseudo-NMI code generation optimisations - Minor fixes for SME and TPIDR2 handling - Miscellaneous updates: ARCH_FORCE_MAX_ORDER is now selectable, replace strtobool() to kstrtobool() in the cpufeature.c code, apply dynamic shadow call stack in two passes, intercept pfn changes in set_pte_at() without the required break-before-make sequence, attempt to dump all instructions on unhandled kernel faults * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (130 commits) arm64: fix .idmap.text assertion for large kernels kselftest/arm64: Don't require FA64 for streaming SVE+ZA tests kselftest/arm64: Copy whole EXTRA context arm64: kprobes: Drop ID map text from kprobes blacklist perf: arm_spe: Print the version of SPE detected perf: arm_spe: Add support for SPEv1.2 inverted event filtering perf: Add perf_event_attr::config3 arm64/sme: Fix __finalise_el2 SMEver check drivers/perf: fsl_imx8_ddr_perf: Remove set-but-not-used variable arm64/signal: Only read new data when parsing the ZT context arm64/signal: Only read new data when parsing the ZA context arm64/signal: Only read new data when parsing the SVE context arm64/signal: Avoid rereading context frame sizes arm64/signal: Make interface for restore_fpsimd_context() consistent arm64/signal: Remove redundant size validation from parse_user_sigframe() arm64/signal: Don't redundantly verify FPSIMD magic arm64/cpufeature: Use helper macros to specify hwcaps arm64/cpufeature: Always use symbolic name for feature value in hwcaps arm64/sysreg: Initial unsigned annotations for ID registers arm64/sysreg: Initial annotation of signed ID registers ... |
||
|
Linus Torvalds
|
88af9b164c |
ACPI updates for 6.3-rc1
- Drop port I/O validation for some regions to avoid AML failures due
to rejections of legitimate port I/O writes (Mario Limonciello).
- Constify acpi_get_handle() pathname argument to allow its callers to
pass const pathnames to it (Sakari Ailus).
- Prevent acpi_ns_simple_repair() from crashing in some cases when
AE_AML_NO_RETURN_VALUE should be returned (Daniil Tatianin).
- Fix typo in CDAT DSMAS struct definition (Lukas Wunner).
- Drop an unnecessary (void *) conversion from the ACPI processor
driver (Zhou jie).
- Modify the ACPI processor performance library code to use the "no
limit" frequency QoS as appropriate and adjust the intel_pstate
driver accordingly (Rafael Wysocki).
- Add support for NBFT to the ACPI table parser (Stuart Hayes).
- Introduce list of known non-PNP devices to avoid enumerating some of
them as PNP devices (Rafael Wysocki).
- Add x86 ACPI paths to the ACPI entry in MAINTAINERS to allow scripts
to report the actual maintainers information (Rafael Wysocki).
- Add two more entries to the ACPI IRQ override quirk list (Adam
Niederer, Werner Sembach).
- Add a pmic_i2c_address entry for Intel Bay Trail Crystal Cove to
allow intel_soc_pmic_exec_mipi_pmic_seq_element() to be used with
the Bay Trail Crystal Cove PMIC OpRegion driver (Hans de Goede).
- Add comments with DSDT power OpRegion field names to the ACPI PMIC
driver (Hans de Goede).
- Fix string termination handling in the ACPI battery driver (Armin
Wolf).
- Limit error type to 32-bit width in the ACPI APEI error injection
code (Shuai Xue).
- Fix Lenovo Ideapad Z570 DMI match in the ACPI backlight driver (Hans
de Goede).
- Silence missing prototype warnings in some places in the ACPI-related
code (Ammar Faizi).
- Make kobj_type structures used in the ACPI code constant (Thomas
Weißschuh).
- Correct spelling in firmware-guide/ACPI (Randy Dunlap).
- Clarify the meaning of Explicit and Implicit in the _DSD GPIO
properties documentation (Andy Shevchenko).
- Fix some kernel-doc comments in the ACPI CPPC library code (Yang Li).
-----BEGIN PGP SIGNATURE-----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=BoTs
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These fix a frequency limit issue in the ACPI processor performance
library code, fix a few issues in the ACPICA code, improve Crystal
Cove support in the ACPI PMIC driver, fix string handling in the ACPI
battery driver, add IRQ override quirks for a few machines more, fix
other assorted problems and clean up code and documentation.
Specifics:
- Drop port I/O validation for some regions to avoid AML failures due
to rejections of legitimate port I/O writes (Mario Limonciello)
- Constify acpi_get_handle() pathname argument to allow its callers
to pass const pathnames to it (Sakari Ailus)
- Prevent acpi_ns_simple_repair() from crashing in some cases when
AE_AML_NO_RETURN_VALUE should be returned (Daniil Tatianin)
- Fix typo in CDAT DSMAS struct definition (Lukas Wunner)
- Drop an unnecessary (void *) conversion from the ACPI processor
driver (Zhou jie)
- Modify the ACPI processor performance library code to use the "no
limit" frequency QoS as appropriate and adjust the intel_pstate
driver accordingly (Rafael Wysocki)
- Add support for NBFT to the ACPI table parser (Stuart Hayes)
- Introduce list of known non-PNP devices to avoid enumerating some
of them as PNP devices (Rafael Wysocki)
- Add x86 ACPI paths to the ACPI entry in MAINTAINERS to allow
scripts to report the actual maintainers information (Rafael
Wysocki)
- Add two more entries to the ACPI IRQ override quirk list (Adam
Niederer, Werner Sembach)
- Add a pmic_i2c_address entry for Intel Bay Trail Crystal Cove to
allow intel_soc_pmic_exec_mipi_pmic_seq_element() to be used with
the Bay Trail Crystal Cove PMIC OpRegion driver (Hans de Goede)
- Add comments with DSDT power OpRegion field names to the ACPI PMIC
driver (Hans de Goede)
- Fix string termination handling in the ACPI battery driver (Armin
Wolf)
- Limit error type to 32-bit width in the ACPI APEI error injection
code (Shuai Xue)
- Fix Lenovo Ideapad Z570 DMI match in the ACPI backlight driver
(Hans de Goede)
- Silence missing prototype warnings in some places in the
ACPI-related code (Ammar Faizi)
- Make kobj_type structures used in the ACPI code constant (Thomas
Weißschuh)
- Correct spelling in firmware-guide/ACPI (Randy Dunlap)
- Clarify the meaning of Explicit and Implicit in the _DSD GPIO
properties documentation (Andy Shevchenko)
- Fix some kernel-doc comments in the ACPI CPPC library code (Yang
Li)"
* tag 'acpi-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (25 commits)
ACPI: make kobj_type structures constant
Documentation: firmware-guide: gpio-properties: Clarify Explicit and Implicit
ACPICA: Fix typo in CDAT DSMAS struct definition
ACPI: resource: Do IRQ override on all TongFang GMxRGxx
ACPI: resource: Add IRQ overrides for MAINGEAR Vector Pro 2 models
ACPI: CPPC: Fix some kernel-doc comments
ACPI: video: Fix Lenovo Ideapad Z570 DMI match
Documentation: firmware-guide/ACPI: correct spelling
ACPI: PMIC: Add comments with DSDT power opregion field names
ACPI: battery: Increase maximum string length
ACPI: battery: Fix buffer overread if not NUL-terminated
ACPI: APEI: EINJ: Limit error type to 32-bit width
MAINTAINERS: Add x86 ACPI paths to the ACPI entry
ACPI: battery: Fix missing NUL-termination with large strings
ACPI: PNP: Introduce list of known non-PNP devices
ACPICA: nsrepair: handle cases without a return value correctly
ACPI: Silence missing prototype warnings
cpufreq: intel_pstate: Drop ACPI _PSS states table patching
ACPI: processor: perflib: Avoid updating frequency QoS unnecessarily
ACPI: processor: perflib: Use the "no limit" frequency QoS
...
|
||
|
Linus Torvalds
|
2504ba8b01 |
Power management updates for 6.3-rc1
- Add EPP support to the AMD P-state cpufreq driver (Perry Yuan, Wyes
Karny, Arnd Bergmann, Bagas Sanjaya).
- Drop the custom cpufreq driver for loongson1 that is not necessary
any more and the corresponding cpufreq platform device (Keguang
Zhang).
- Remove "select SRCU" from system sleep, cpufreq and OPP Kconfig
entries (Paul E. McKenney).
- Enable thermal cooling for Tegra194 (Yi-Wei Wang).
- Register module device table and add missing compatibles for
cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss).
- Various dt binding updates for qcom-cpufreq-nvmem and opp-v2-kryo-cpu
(Christian Marangi).
- Make kobj_type structure in the cpufreq core constant (Thomas
Weißschuh).
- Make cpufreq_unregister_driver() return void (Uwe Kleine-König).
- Make the TEO cpuidle governor check CPU utilization in order to refine
idle state selection (Kajetan Puchalski).
- Make Kconfig select the haltpoll cpuidle governor when the haltpoll
cpuidle driver is selected and replace a default_idle() call in that
driver with arch_cpu_idle() to allow MWAIT to be used (Li RongQing).
- Add Emerald Rapids Xeon support to the intel_idle driver (Artem
Bityutskiy).
- Add ARCH_SUSPEND_POSSIBLE dependencies for ARMv4 cpuidle drivers to
avoid randconfig build failures (Arnd Bergmann).
- Make kobj_type structures used in the cpuidle sysfs interface
constant (Thomas Weißschuh).
- Make the cpuidle driver registration code update microsecond values
of idle state parameters in accordance with their nanosecond values
if they are provided (Rafael Wysocki).
- Make the PSCI cpuidle driver prevent topology CPUs from being
suspended on PREEMPT_RT (Krzysztof Kozlowski).
- Document that pm_runtime_force_suspend() cannot be used with
DPM_FLAG_SMART_SUSPEND (Richard Fitzgerald).
- Add EXPORT macros for exporting PM functions from drivers (Richard
Fitzgerald).
- Remove /** from non-kernel-doc comments in hibernation code (Randy
Dunlap).
- Fix possible name leak in powercap_register_zone() (Yang Yingliang).
- Add Meteor Lake and Emerald Rapids support to the intel_rapl power
capping driver (Zhang Rui).
- Modify the idle_inject power capping facility to support 100% idle
injection (Srinivas Pandruvada).
- Fix large time windows handling in the intel_rapl power capping
driver (Zhang Rui).
- Fix memory leaks with using debugfs_lookup() in the generic PM
domains and Energy Model code (Greg Kroah-Hartman).
- Add missing 'cache-unified' property in the example for kryo OPP
bindings (Rob Herring).
- Fix error checking in opp_migrate_dentry() (Qi Zheng).
- Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad
Dybcio).
- Modify some power management utilities to use the canonical ftrace
path (Ross Zwisler).
- Correct spelling problems for Documentation/power/ as reported by
codespell (Randy Dunlap).
-----BEGIN PGP SIGNATURE-----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=lZLx
-----END PGP SIGNATURE-----
Merge tag 'pm-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add EPP support to the AMD P-state cpufreq driver, add support
for new platforms to the Intel RAPL power capping driver, intel_idle
and the Qualcomm cpufreq driver, enable thermal cooling for Tegra194,
drop the custom cpufreq driver for loongson1 that is not necessary any
more (and the corresponding cpufreq platform device), fix assorted
issues and clean up code.
Specifics:
- Add EPP support to the AMD P-state cpufreq driver (Perry Yuan, Wyes
Karny, Arnd Bergmann, Bagas Sanjaya)
- Drop the custom cpufreq driver for loongson1 that is not necessary
any more and the corresponding cpufreq platform device (Keguang
Zhang)
- Remove "select SRCU" from system sleep, cpufreq and OPP Kconfig
entries (Paul E. McKenney)
- Enable thermal cooling for Tegra194 (Yi-Wei Wang)
- Register module device table and add missing compatibles for
cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss)
- Various dt binding updates for qcom-cpufreq-nvmem and
opp-v2-kryo-cpu (Christian Marangi)
- Make kobj_type structure in the cpufreq core constant (Thomas
Weißschuh)
- Make cpufreq_unregister_driver() return void (Uwe Kleine-König)
- Make the TEO cpuidle governor check CPU utilization in order to
refine idle state selection (Kajetan Puchalski)
- Make Kconfig select the haltpoll cpuidle governor when the haltpoll
cpuidle driver is selected and replace a default_idle() call in
that driver with arch_cpu_idle() to allow MWAIT to be used (Li
RongQing)
- Add Emerald Rapids Xeon support to the intel_idle driver (Artem
Bityutskiy)
- Add ARCH_SUSPEND_POSSIBLE dependencies for ARMv4 cpuidle drivers to
avoid randconfig build failures (Arnd Bergmann)
- Make kobj_type structures used in the cpuidle sysfs interface
constant (Thomas Weißschuh)
- Make the cpuidle driver registration code update microsecond values
of idle state parameters in accordance with their nanosecond values
if they are provided (Rafael Wysocki)
- Make the PSCI cpuidle driver prevent topology CPUs from being
suspended on PREEMPT_RT (Krzysztof Kozlowski)
- Document that pm_runtime_force_suspend() cannot be used with
DPM_FLAG_SMART_SUSPEND (Richard Fitzgerald)
- Add EXPORT macros for exporting PM functions from drivers (Richard
Fitzgerald)
- Remove /** from non-kernel-doc comments in hibernation code (Randy
Dunlap)
- Fix possible name leak in powercap_register_zone() (Yang Yingliang)
- Add Meteor Lake and Emerald Rapids support to the intel_rapl power
capping driver (Zhang Rui)
- Modify the idle_inject power capping facility to support 100% idle
injection (Srinivas Pandruvada)
- Fix large time windows handling in the intel_rapl power capping
driver (Zhang Rui)
- Fix memory leaks with using debugfs_lookup() in the generic PM
domains and Energy Model code (Greg Kroah-Hartman)
- Add missing 'cache-unified' property in the example for kryo OPP
bindings (Rob Herring)
- Fix error checking in opp_migrate_dentry() (Qi Zheng)
- Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad
Dybcio)
- Modify some power management utilities to use the canonical ftrace
path (Ross Zwisler)
- Correct spelling problems for Documentation/power/ as reported by
codespell (Randy Dunlap)"
* tag 'pm-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits)
Documentation: amd-pstate: disambiguate user space sections
cpufreq: amd-pstate: Fix invalid write to MSR_AMD_CPPC_REQ
dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum
dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional
dt-bindings: cpufreq: qcom-cpufreq-nvmem: specify supported opp tables
PM: Add EXPORT macros for exporting PM functions
cpuidle: psci: Do not suspend topology CPUs on PREEMPT_RT
MIPS: loongson32: Drop obsolete cpufreq platform device
powercap: intel_rapl: Fix handling for large time window
cpuidle: driver: Update microsecond values of state parameters as needed
cpuidle: sysfs: make kobj_type structures constant
cpuidle: add ARCH_SUSPEND_POSSIBLE dependencies
PM: EM: fix memory leak with using debugfs_lookup()
PM: domains: fix memory leak with using debugfs_lookup()
cpufreq: Make kobj_type structure constant
cpufreq: davinci: Fix clk use after free
cpufreq: amd-pstate: avoid uninitialized variable use
cpufreq: Make cpufreq_unregister_driver() return void
OPP: fix error checking in opp_migrate_dentry()
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM8550 compatible
...
|
||
|
Linus Torvalds
|
1f2d9ffc7a |
Scheduler updates in this cycle are:
- Improve the scalability of the CFS bandwidth unthrottling logic
with large number of CPUs.
- Fix & rework various cpuidle routines, simplify interaction with
the generic scheduler code. Add __cpuidle methods as noinstr to
objtool's noinstr detection and fix boatloads of cpuidle bugs & quirks.
- Add new ABI: introduce MEMBARRIER_CMD_GET_REGISTRATIONS,
to query previously issued registrations.
- Limit scheduler slice duration to the sysctl_sched_latency period,
to improve scheduling granularity with a large number of SCHED_IDLE
tasks.
- Debuggability enhancement on sys_exit(): warn about disabled IRQs,
but also enable them to prevent a cascade of followup problems and
repeat warnings.
- Fix the rescheduling logic in prio_changed_dl().
- Micro-optimize cpufreq and sched-util methods.
- Micro-optimize ttwu_runnable()
- Micro-optimize the idle-scanning in update_numa_stats(),
select_idle_capacity() and steal_cookie_task().
- Update the RSEQ code & self-tests
- Constify various scheduler methods
- Remove unused methods
- Refine __init tags
- Documentation updates
- ... Misc other cleanups, fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=l1nN
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Improve the scalability of the CFS bandwidth unthrottling logic with
large number of CPUs.
- Fix & rework various cpuidle routines, simplify interaction with the
generic scheduler code. Add __cpuidle methods as noinstr to objtool's
noinstr detection and fix boatloads of cpuidle bugs & quirks.
- Add new ABI: introduce MEMBARRIER_CMD_GET_REGISTRATIONS, to query
previously issued registrations.
- Limit scheduler slice duration to the sysctl_sched_latency period, to
improve scheduling granularity with a large number of SCHED_IDLE
tasks.
- Debuggability enhancement on sys_exit(): warn about disabled IRQs,
but also enable them to prevent a cascade of followup problems and
repeat warnings.
- Fix the rescheduling logic in prio_changed_dl().
- Micro-optimize cpufreq and sched-util methods.
- Micro-optimize ttwu_runnable()
- Micro-optimize the idle-scanning in update_numa_stats(),
select_idle_capacity() and steal_cookie_task().
- Update the RSEQ code & self-tests
- Constify various scheduler methods
- Remove unused methods
- Refine __init tags
- Documentation updates
- Misc other cleanups, fixes
* tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (110 commits)
sched/rt: pick_next_rt_entity(): check list_entry
sched/deadline: Add more reschedule cases to prio_changed_dl()
sched/fair: sanitize vruntime of entity being placed
sched/fair: Remove capacity inversion detection
sched/fair: unlink misfit task from cpu overutilized
objtool: mem*() are not uaccess safe
cpuidle: Fix poll_idle() noinstr annotation
sched/clock: Make local_clock() noinstr
sched/clock/x86: Mark sched_clock() noinstr
x86/pvclock: Improve atomic update of last_value in pvclock_clocksource_read()
x86/atomics: Always inline arch_atomic64*()
cpuidle: tracing, preempt: Squash _rcuidle tracing
cpuidle: tracing: Warn about !rcu_is_watching()
cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG
cpuidle: drivers: firmware: psci: Dont instrument suspend code
KVM: selftests: Fix build of rseq test
exit: Detect and fix irq disabled state in oops
cpuidle, arm64: Fix the ARM64 cpuidle logic
cpuidle: mvebu: Fix duplicate flags assignment
sched/fair: Limit sched slice duration
...
|
||
|
Rafael J. Wysocki
|
f32309c4d0 |
Merge branches 'acpi-video', 'acpi-misc' and 'acpi-docs'
Merge ACPI backlight driver changes, miscellaneous ACPI-related changes and ACPI-related documentation updates for 6.3-rc1: - Fix Lenovo Ideapad Z570 DMI match in the ACPI backlight driver (Hans de Goede). - Silence missing prototype warnings in some places in the ACPI-related code (Ammar Faizi). - Make kobj_type structures used in the ACPI code constant (Thomas Weißschuh). - Correct spelling in firmware-guide/ACPI (Randy Dunlap). - Clarify the meaning of Explicit and Implicit in the _DSD GPIO properties documentation (Andy Shevchenko). * acpi-video: ACPI: video: Fix Lenovo Ideapad Z570 DMI match * acpi-misc: ACPI: make kobj_type structures constant ACPI: Silence missing prototype warnings * acpi-docs: Documentation: firmware-guide: gpio-properties: Clarify Explicit and Implicit Documentation: firmware-guide/ACPI: correct spelling |
||
|
Rafael J. Wysocki
|
b7ab6b91b9 |
Merge branches 'acpi-resource', 'acpi-pmic', 'acpi-battery' and 'acpi-apei'
Merge ACPI resources handling changes, ACPI PMIC and battery drivers changes and ACPI APEI changes for 6.3-rc1: - Add two more entries to the ACPI IRQ override quirk list (Adam Niederer, Werner Sembach). - Add a pmic_i2c_address entry for Intel Bay Trail Crystal Cove to allow intel_soc_pmic_exec_mipi_pmic_seq_element() to be used with the Bay Trail Crystal Cove PMIC OpRegion driver (Hans de Goede). - Add comments with DSDT power OpRegion field names to the ACPI PMIC driver (Hans de Goede). - Fix string termination handling in the ACPI battery driver (Armin Wolf). - Limit error type to 32-bit width in the ACPI APEI error injection code (Shuai Xue). * acpi-resource: ACPI: resource: Do IRQ override on all TongFang GMxRGxx ACPI: resource: Add IRQ overrides for MAINGEAR Vector Pro 2 models * acpi-pmic: ACPI: PMIC: Add comments with DSDT power opregion field names ACPI: PMIC: Add pmic_i2c_address to BYT Crystal Cove support * acpi-battery: ACPI: battery: Increase maximum string length ACPI: battery: Fix buffer overread if not NUL-terminated ACPI: battery: Fix missing NUL-termination with large strings * acpi-apei: ACPI: APEI: EINJ: Limit error type to 32-bit width |
||
|
Rafael J. Wysocki
|
9f4512c2ae |
Merge branches 'acpi-processor', 'acpi-tables', 'acpi-pnp' and 'acpi-maintainers'
Merge ACPI processor driver changes, ACPI table parser changes, ACPI device enumeration changes related to PNP and a MAINTAINERS update related to ACPI for 6.3-rc1: - Drop an unnecessary (void *) conversion from the ACPI processor driver (Zhou jie). - Modify the ACPI processor performance library code to use the "no limit" frequency QoS as appropriate and adjust the intel_pstate driver accordingly (Rafael Wysocki). - Add support for NBFT to the ACPI table parser (Stuart Hayes). - Introduce list of known non-PNP devices to avoid enumerating some of them as PNP devices (Rafael Wysocki). - Add x86 ACPI paths to the ACPI entry in MAINTAINERS to allow scripts to report the actual maintainers information (Rafael Wysocki). * acpi-processor: cpufreq: intel_pstate: Drop ACPI _PSS states table patching ACPI: processor: perflib: Avoid updating frequency QoS unnecessarily ACPI: processor: perflib: Use the "no limit" frequency QoS ACPI: processor: idle: Drop unnecessary (void *) conversion * acpi-tables: ACPI: tables: Add support for NBFT * acpi-pnp: ACPI: PNP: Introduce list of known non-PNP devices * acpi-maintainers: MAINTAINERS: Add x86 ACPI paths to the ACPI entry |
||
|
Rafael J. Wysocki
|
391712d753 |
Merge branch 'acpica'
Merge ACPICA changes for 6.3-rc1: - Drop port I/O validation for some regions to avoid AML failures due to rejections of legitimate port I/O writes (Mario Limonciello). - Constify acpi_get_handle() pathname argument to allow its callers to pass conts pathnames to it (Sakari Ailus). - Prevent acpi_ns_simple_repair() from crashing in some cases when AE_AML_NO_RETURN_VALUE should be returned (Daniil Tatianin). - Fix typo in CDAT DSMAS struct definition (Lukas Wunner). * acpica: ACPICA: Fix typo in CDAT DSMAS struct definition ACPICA: nsrepair: handle cases without a return value correctly ACPICA: Constify pathname argument for acpi_get_handle() ACPICA: Drop port I/O validation for some regions |
||
|
Thomas Weißschuh
|
a527b01117 |
ACPI: make kobj_type structures constant
Since commit
|
||
|
Rafael J. Wysocki
|
3500e221d5 | Merge back cpufreq material for 6.3-rc1. | ||
|
Werner Sembach
|
17bb7046e7 |
ACPI: resource: Do IRQ override on all TongFang GMxRGxx
Apply commit |
||
|
Adam Niederer
|
cb18703c17 |
ACPI: resource: Add IRQ overrides for MAINGEAR Vector Pro 2 models
Fix a regression introduced by commit |
||
|
Linus Torvalds
|
95232dd9ae |
libnvdimm fixes for 6.2
- Resolve the conflict between KMSAN and NVDIMM with respect to
reserving pmem namespace / volume capacity for larger
sizeof(struct page)
- Fix a lockdep warning in the the NFIT code
- Fix a kernel-doc build warning
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCY+b8BQAKCRDfioYZHlFs
Z+W4AQDNd/WepR9MiDZsDx+Kbte2WEpf3lHvP8Nzi9hspnlpQwD8Ds/rV4y4XGW5
/CXl6fqrs4A6O9jtz4FxCu+ZCy5YvAI=
=SiUf
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-fixes-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A fix for an issue that could causes users to inadvertantly reserve
too much capacity when debugging the KMSAN and persistent memory
namespace, a lockdep fix, and a kernel-doc build warning:
- Resolve the conflict between KMSAN and NVDIMM with respect to
reserving pmem namespace / volume capacity for larger sizeof(struct
page)
- Fix a lockdep warning in the the NFIT code
- Fix a kernel-doc build warning"
* tag 'libnvdimm-fixes-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm: Support sizeof(struct page) > MAX_STRUCT_PAGE_SIZE
ACPI: NFIT: fix a potential deadlock during NFIT teardown
dax: super.c: fix kernel-doc bad line warning
|
||
|
Dan Williams
|
b8b9ffced0 |
Merge branch 'for-6.3/cxl-ram-region' into cxl/next
Include the support for enumerating and provisioning ram regions for v6.3. This also include a default policy change for ram / volatile device-dax instances to assign them to the dax_kmem driver by default. |
||
|
Dan Williams
|
7dab174e2e |
dax/hmem: Move hmem device registration to dax_hmem.ko
In preparation for the CXL region driver to take over the responsibility of registering device-dax instances for CXL regions, move the registration of "hmem" devices to dax_hmem.ko. Previously the builtin component of this enabling (drivers/dax/hmem/device.o) would register platform devices for each address range and trigger the dax_hmem.ko module to load and attach device-dax instances to those devices. Now, the ranges are collected from the HMAT and EFI memory map walking, but the device creation is deferred. A new "hmem_platform" device is created which triggers dax_hmem.ko to load and register the platform devices. Tested-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/167602002771.1924368.5653558226424530127.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
|
Dan Williams
|
df2798bc77 |
dax/hmem: Move HMAT and Soft reservation probe initcall level
In preparation for moving more filtering of "hmem" ranges into the dax_hmem.ko module, update the initcall levels. HMAT range registration moves to subsys_initcall() to be done before Soft Reservation probing, and Soft Reservation probing is moved to device_initcall() to be done before dax_hmem.ko initialization if it is built-in. Tested-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/167602001107.1924368.11562316181038595611.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
|
Suren Baghdasaryan
|
1c71222e5f |
mm: replace vma->vm_flags direct modifications with modifier calls
Replace direct modifications to vma->vm_flags with calls to modifier functions to be able to track flag changes and to keep vma locking correctness. [akpm@linux-foundation.org: fix drivers/misc/open-dice.c, per Hyeonggon Yoo] Link: https://lkml.kernel.org/r/20230126193752.297968-5-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjun Roy <arjunroy@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Minchan Kim <minchan@google.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Oskolkov <posk@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Punit Agrawal <punit.agrawal@bytedance.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Song Liu <songliubraving@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Yang Li
|
fda7be2068 |
ACPI: CPPC: Fix some kernel-doc comments
Add the description of @pcc_ss_id in pcc_data_alloc(). Add the description of @cpu_num in cppc_get_transition_latency(). clear the below warnings: drivers/acpi/cppc_acpi.c:607: warning: Function parameter or member 'pcc_ss_id' not described in 'pcc_data_alloc' drivers/acpi/cppc_acpi.c:1616: warning: Function parameter or member 'cpu_num' not described in 'cppc_get_transition_latency' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3983 Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> [ rjw: Dropped redundant empty code lines, minor edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Rafael J. Wysocki
|
ced3960aa0 | Merge back cpufreq material for 6.3-rc1. | ||
|
Dan Williams
|
5485eb9559 |
Merge branch 'for-6.3/cxl' into cxl/next
Merge the general CXL updates with fixes targeting v6.2-rc for v6.3. Resolve a conflict with the fix and move of cxl_report_and_clear() from pci.c to core/pci.c. |
||
|
Hans de Goede
|
2d11eae42d |
ACPI: video: Fix Lenovo Ideapad Z570 DMI match
Multiple Ideapad Z570 variants need acpi_backlight=native to force native use on these pre Windows 8 machines since acpi_video backlight control does not work here. The original DMI quirk matches on a product_name of "102434U" but other variants may have different product_name-s such as e.g. "1024D9U". Move to checking product_version instead as is more or less standard for Lenovo DMI quirks for similar reasons. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Perry Yuan
|
7bc1fcd399 |
ACPI: CPPC: Add AMD pstate energy performance preference cppc control
Add support for setting and querying EPP preferences to the generic CPPC driver. This enables downstream drivers such as amd-pstate to discover and use these values. Downstream drivers that want to use the new symbols cppc_get_epp_caps and cppc_set_epp_perf for querying and setting EPP preferences will need to call cppc_set_epp_perf to enable the EPP function firstly. Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Wyes Karny <wyes.karny@amd.com> Tested-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Perry Yuan <Perry.Yuan@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Ingo Molnar
|
57a30218fa |
Linux 6.2-rc6
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmPW7E8eHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGf7MIAI0JnHN9WvtEukSZ E6j6+cEGWxsvD6q0g3GPolaKOCw7hlv0pWcFJFcUAt0jebspMdxV2oUGJ8RYW7Lg nCcHvEVswGKLAQtQSWw52qotW6fUfMPsNYYB5l31sm1sKH4Cgss0W7l2HxO/1LvG TSeNHX53vNAZ8pVnFYEWCSXC9bzrmU/VALF2EV00cdICmfvjlgkELGXoLKJJWzUp s63fBHYGGURSgwIWOKStoO6HNo0j/F/wcSMx8leY8qDUtVKHj4v24EvSgxUSDBER ch3LiSQ6qf4sw/z7pqruKFthKOrlNmcc0phjiES0xwwGiNhLv0z3rAhc4OM2cgYh SDc/Y/c= =zpaD -----END PGP SIGNATURE----- Merge tag 'v6.2-rc6' into sched/core, to pick up fixes Pick up fixes before merging another batch of cpuidle updates. Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Hans de Goede
|
7de6c3fb6d |
ACPI: PMIC: Add comments with DSDT power opregion field names
The DSDTs of CHT devices using the Dollar Cove TI PMIC, all use LDO1 - LDO14 names for the DSDT power opregion field names. Add comments with these fields to make it easier to see which PMIC registers are being set by ACPI code using these. Note that LDO4 is missing and the mapped registers jump from 0x43 to 0x45 to match. This matches with how the fields are declared in the DSDT where LDO4 is skipped too. Note there is no hole in the field addresses, LDO4 is simply just not defined on either side. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Armin Wolf
|
91507d25a6 |
ACPI: battery: Increase maximum string length
On the Dell Inspiron 3505, the battery model name is represented as a hex string containing seven numbers, causing it to be larger than the current maximum string length (32). Increase this length to 64 to avoid truncating the string in such cases. Also introduce a common define for the length. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Armin Wolf
|
a1a32ded28 |
ACPI: battery: Fix buffer overread if not NUL-terminated
If a buffer containing ASCII characters is not NUL-terminated (which is perfectly legal according to the ACPI specification), the ACPI battery driver might not honor its length. Fix this by limiting the amount of data to be copied to the buffer length while also using strscpy() to make sure that the resulting string is always NUL-terminated. Also replace strncpy() vs strscpy(). Signed-off-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Shuai Xue
|
53fc7e80f3 |
ACPI: APEI: EINJ: Limit error type to 32-bit width
The bit map of error types to inject is 32-bit width [1]. Add parameter check to reflect the fact. [1] ACPI Specification 6.4, Section 18.6.4. Error Types Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Linus Torvalds
|
bc6bc34b10 |
- Start checking for -mindirect-branch-cs-prefix clang support too now that LLVM
16 will support it - Fix a NULL ptr deref when suspending with Xen PV - Have a SEV-SNP guest check explicitly for features enabled by the hypervisor and fail gracefully if some are unsupported by the guest instead of failing in a non-obvious and hard-to-debug way - Fix a MSI descriptor leakage under Xen - Mark Xen's MSI domain as supporting MSI-X - Prevent legacy PIC interrupts from being resent in software by marking them level triggered, as they should be, which lead to a NULL ptr deref -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmPWdaAACgkQEsHwGGHe VUrHUBAAvRh7cDVKvr2wPNJ+9RFjPFubcLq/+4yTe4Bu14wnYn8+gb2S7P2bPJWl TxbZhJGV2IeYyB+aJybjGwX96AzE5lWD6epQLRLI/BOVmqLA8Eyw9te0NEQDd9Wq hgY1/hhUmLdpXubq09YjIht5nlxVZ+JFfppouTR7LVtZl7MFvQbAOU8rWzpcbm7l UlA4GLakFeOYpbI5g+zzsZ1a1M0cSz8wQ43plD5aAtNy2wKbWiA4QDXJo9J7+ZQg 1FmOHZ3ChPjEhf9k/N2uAZ6RUHVEDIJ7hDfsM3j/qsKGzCV4cho2Ify+0PFWo4pt FO2bRh1yDFqdz4m6ulhnmuMnoRnEuswwrTzrG+HYu1ntpUt72dULmmRBpJ0s6C7W BHpCThNWIlcfHbLNY+VAOJ2hiOqfU/8ld+8R0sn7xmomjgCRYHh9kDGOeuvh1hJl jfITDuL2gjcj3Ph6+xh6KvOga41ff3EcxkfvqolZ/emRllPiDWsKYXVgUIl22FHt 23xH7gutPCp27MdoXM1EaWs5s/PQfctvm4LrW6XS8IjWURLo4RrkU6y7YD5VKVy8 KCKcpF+JMdE1Ao1WpMFfjDG4ObyMYyqnD790nQVM1e5kIhOpeWaa7WzkGFRyIo6Q 5BU3GGDyMT8SHy7NFhQL62YJe0P2ZctNIDjiTQlYDnWWhjmvk8I= =4QMN -----END PGP SIGNATURE----- Merge tag 'x86_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Start checking for -mindirect-branch-cs-prefix clang support too now that LLVM 16 will support it - Fix a NULL ptr deref when suspending with Xen PV - Have a SEV-SNP guest check explicitly for features enabled by the hypervisor and fail gracefully if some are unsupported by the guest instead of failing in a non-obvious and hard-to-debug way - Fix a MSI descriptor leakage under Xen - Mark Xen's MSI domain as supporting MSI-X - Prevent legacy PIC interrupts from being resent in software by marking them level triggered, as they should be, which lead to a NULL ptr deref * tag 'x86_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/build: Move '-mindirect-branch-cs-prefix' out of GCC-only block acpi: Fix suspend with Xen PV x86/sev: Add SEV-SNP guest feature negotiation support x86/pci/xen: Fixup fallout from the PCI/MSI overhaul x86/pci/xen: Set MSI_FLAG_PCI_MSIX support in Xen MSI domain x86/i8259: Mark legacy PIC interrupts with IRQ_LEVEL |
||
|
Linus Torvalds
|
04ad927cac |
ACPI fixes for 6.2-rc6
Add ACPI backlight handling quirks for 3 machines (Hans de Goede). -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmPT4IsSHHJqd0Byand5 c29ja2kubmV0AAoJEILEb/54YlRxmecQAKvr5Y5bxgNbB1P0dElL/XAJNT4HuKPz nDEqj8rHbY+QwHtpbxRsglUggUE+9tGvNJseNivRMacPfk+rm4+zeSUSFBbbMGTM 6DicU8iThkvG9VZpH2fVlYq7nkS+yZeM5yv7HOInSNFyi00bAo3vCWiGQh94q/rS 6UuZWPyIi8zG/hqVQsJN8nRe+rJYmVVCRZtJ/tf/VJnYJ8fPj8sX2Z6KsDZ0kp3J E0wb9ULo0S68zmJu/oOAv5e/wXSm8mmz6fok1TA+KEfGkawVE9Y9DmKRIzQD2nl8 S45e6Y2jjQ8qE9IK1hZp8bhtuefyhhW+7eVunMoh55FbizMfK2whyh73g62pzVJk bnLF9YFjOh76uYjtBtbvVy8CN5HPMPgqqsLSJU2NZH/dscd6J6k02xzm0ZT7DViq IoFCEmpP2GDZX9o7WfomykiH1R95I3q2LPJoRO2W+ybRvhNJA4PlZkAXjpNOHFSy 6hT+EeHHGHCirpgbBQCprT+/a1+Sy3doi33B3EeiQrmQ8PLRw1RCaMfU+XLXME+s uSquxwMnanFxc5agb/8N1MuiudJrElCKn7CdnELPxa3Ah/OU/GHjCRKfebcTq/ec nHhAr3YJr8Dbf1cc9o9Tt1OKkUCB68XONnZAN2yAqmoKBdFam8FM7SAgQsLMI3ie aotAO41hOC++ =Uc6L -----END PGP SIGNATURE----- Merge tag 'acpi-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "Add ACPI backlight handling quirks for 3 machines (Hans de Goede)" * tag 'acpi-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: video: Add backlight=native DMI quirk for Asus U46E ACPI: video: Add backlight=native DMI quirk for HP EliteBook 8460p ACPI: video: Add backlight=native DMI quirk for HP Pavilion g6-1d80nr |
||
|
Greg Kroah-Hartman
|
2a81ada32f |
driver core: make struct bus_type.uevent() take a const *
The uevent() callback in struct bus_type should not be modifying the device that is passed into it, so mark it as a const * and propagate the function signature changes out into all relevant subsystems that use this callback. Acked-by: Rafael J. Wysocki <rafael@kernel.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230111113018.459199-16-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
162736b0d7 |
driver core: make struct device_type.uevent() take a const *
The uevent() callback in struct device_type should not be modifying the device that is passed into it, so mark it as a const * and propagate the function signature changes out into all relevant subsystems that use this callback. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Andreas Noever <andreas.noever@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Bard Liao <yung-chuan.liao@linux.intel.com> Cc: Chaitanya Kulkarni <kch@nvidia.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jilin Yuan <yuanjilin@cdjrlc.com> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Len Brown <lenb@kernel.org> Cc: Mark Gross <markgross@kernel.org> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Maximilian Luz <luzmaximilian@gmail.com> Cc: Michael Jamet <michael.jamet@intel.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Sanyog Kale <sanyog.r.kale@intel.com> Cc: Sean Young <sean@mess.org> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Won Chung <wonchung@google.com> Cc: Yehezkel Bernat <YehezkelShB@gmail.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> # for Thunderbolt Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Wolfram Sang <wsa@kernel.org> Acked-by: Vinod Koul <vkoul@kernel.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230111113018.459199-6-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Vishal Verma
|
fb6df4366f |
ACPI: NFIT: fix a potential deadlock during NFIT teardown
Lockdep reports that acpi_nfit_shutdown() may deadlock against an
opportune acpi_nfit_scrub(). acpi_nfit_scrub () is run from inside a
'work' and therefore has already acquired workqueue-internal locks. It
also acquiires acpi_desc->init_mutex. acpi_nfit_shutdown() first
acquires init_mutex, and was subsequently attempting to cancel any
pending workqueue items. This reversed locking order causes a potential
deadlock:
======================================================
WARNING: possible circular locking dependency detected
6.2.0-rc3 #116 Tainted: G O N
------------------------------------------------------
libndctl/1958 is trying to acquire lock:
ffff888129b461c0 ((work_completion)(&(&acpi_desc->dwork)->work)){+.+.}-{0:0}, at: __flush_work+0x43/0x450
but task is already holding lock:
ffff888129b460e8 (&acpi_desc->init_mutex){+.+.}-{3:3}, at: acpi_nfit_shutdown+0x87/0xd0 [nfit]
which lock already depends on the new lock.
...
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&acpi_desc->init_mutex);
lock((work_completion)(&(&acpi_desc->dwork)->work));
lock(&acpi_desc->init_mutex);
lock((work_completion)(&(&acpi_desc->dwork)->work));
*** DEADLOCK ***
Since the workqueue manipulation is protected by its own internal locking,
the cancellation of pending work doesn't need to be done under
acpi_desc->init_mutex. Move cancel_delayed_work_sync() outside the
init_mutex to fix the deadlock. Any work that starts after
acpi_nfit_shutdown() drops the lock will see ARS_CANCEL, and the
cancel_delayed_work_sync() will safely flush it out.
Reported-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/20230112-acpi_nfit_lockdep-v1-1-660be4dd10be@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
||
|
Hans de Goede
|
b0935f110c |
ACPI: video: Fix apple gmux detection
Some apple laptop models have an ACPI device with a HID of APP000B
and that device has an IO resource (so it does not describe the new
unsupported MMIO based gmux type), but there actually is no gmux
in the laptop at all.
The gmux_probe() function of the actual apple-gmux driver has code
to detect this, this code has been factored out into a new
apple_gmux_detect() helper in apple-gmux.h.
Use this new function to fix acpi_video_get_backlight_type() wrongly
returning apple_gmux as type on the following laptops:
MacBookPro5,4
https://pastebin.com/8Xjq7RhS
MacBookPro8,1
https://linux-hardware.org/?probe=e513cfbadb&log=dmesg
MacBookPro9,2
https://bugzilla.kernel.org/attachment.cgi?id=278961
MacBookPro10,2
https://lkml.org/lkml/2014/9/22/657
MacBookPro11,2
https://forums.fedora-fr.org/viewtopic.php?id=70142
MacBookPro11,4
https://raw.githubusercontent.com/im-0/investigate-card-reader-suspend-problem-on-mbp11.4/mast
Fixes:
|
||
|
Mark Rutland
|
8f9e0a5281 |
ACPI: Don't build ACPICA with '-Os'
The ACPICA code has been built with '-Os' since the beginning of git history, though there's no explanatory comment as to why. This is unfortunate as GCC drops the alignment specificed by '-falign-functions=N' when '-Os' is used, as reported in GCC bug 88345: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=88345 This prevents CONFIG_FUNCTION_ALIGNMENT and CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B from having their expected effect on the ACPICA code. This is doubly unfortunate as in subsequent patches arm64 will depend upon CONFIG_FUNCTION_ALIGNMENT for its ftrace implementation. Drop the '-Os' flag when building the ACPICA code. With this removed, the code builds cleanly and works correctly in testing so far. I've tested this by selecting CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B=y, building and booting a kernel using ACPI, and looking for misaligned text symbols: * arm64: Before, v6.2-rc3: # uname -rm 6.2.0-rc3 aarch64 # grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l 5009 Before, v6.2-rc3 + fixed __cold: # uname -rm 6.2.0-rc3-00001-g2a2bedf8bfa9 aarch64 # grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l 919 After: # uname -rm 6.2.0-rc3-00002-g267bddc38572 aarch64 # grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l 323 # grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | grep acpi | wc -l 0 * x86_64: Before, v6.2-rc3: # uname -rm 6.2.0-rc3 x86_64 # grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l 11537 Before, v6.2-rc3 + fixed __cold: # uname -rm 6.2.0-rc3-00001-g2a2bedf8bfa9 x86_64 # grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l 2805 After: # uname -rm 6.2.0-rc3-00002-g267bddc38572 x86_64 # grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l 1357 # grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | grep acpi | wc -l 0 With the patch applied, the remaining unaligned text labels are a combination of static call trampolines and labels in assembly, which can be dealt with in subsequent patches. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Florent Revest <revest@chromium.org> Cc: Len Brown <lenb@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Deacon <will@kernel.org> Cc: linux-acpi@vger.kernel.org Link: https://lore.kernel.org/r/20230123134603.1064407-4-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Hans de Goede
|
e6b3086fdd |
ACPI: video: Add backlight=native DMI quirk for Asus U46E
The Asus U46E backlight tables have a set of interesting problems:
1. Its ACPI tables do make _OSI ("Windows 2012") checks, so
acpi_osi_is_win8() should return true.
But the tables have 2 sets of _OSI calls, one from the usual global
_INI method setting a global OSYS variable and a second set of _OSI
calls from a MSOS method and the MSOS method is the only one calling
_OSI ("Windows 2012").
The MSOS method only gets called in the following cases:
1. From some Asus specific WMI methods
2. From _DOD, which only runs after acpi_video_get_backlight_type()
has already been called by the i915 driver
3. From other ACPI video bus methods which never run (see below)
4. From some EC query callbacks
So when i915 calls acpi_video_get_backlight_type() MSOS has never run
and acpi_osi_is_win8() returns false, so acpi_video_get_backlight_type()
returns acpi_video as the desired backlight type, which causes
the intel_backlight device to not register.
2. _DOD effectively does this:
Return (Package (0x01)
{
0x0400
})
causing acpi_video_device_in_dod() to return false, which causes
the acpi_video backlight device to not register.
Leaving the user with no backlight device at all. Note that before 6.1.y
the i915 driver would register the intel_backlight device unconditionally
and since that then was the only backlight device userspace would use that.
Add a backlight=native DMI quirk for this special laptop to restore
the old (and working) behavior of the intel_backlight device registering.
Fixes:
|
||
|
Hans de Goede
|
9dcb34234b |
ACPI: video: Add backlight=native DMI quirk for HP EliteBook 8460p
The HP EliteBook 8460p predates Windows 8, so it defaults to using
acpi_video# for backlight control.
Starting with the 6.1.y kernels the native radeon_bl0 backlight is hidden
in this case instead of relying on userspace preferring acpi_video# over
native backlight devices.
It turns out that for the acpi_video# interface to work on
the HP EliteBook 8460p, the brightness needs to be set at least once
through the native interface, which now no longer is done breaking
backlight control.
The native interface however always works without problems, so add
a quirk to use native backlight on the EliteBook 8460p to fix this.
Fixes:
|
||
|
Hans de Goede
|
d77596d432 |
ACPI: video: Add backlight=native DMI quirk for HP Pavilion g6-1d80nr
The HP Pavilion g6-1d80nr predates Windows 8, so it defaults to using acpi_video# for backlight control, but this is non functional on this model. Add a DMI quirk to use the native backlight interface which does work properly. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Greg Kroah-Hartman
|
f89fd04323 |
Merge 6.2-rc5 into driver-core-next
We need the driver core fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Rafael J. Wysocki
|
3bdd346ebd |
Merge branches 'acpi-prm' and 'acpi-video'
Merge an ACPI PRM (platform runtime) support fix and an ACPI backlight quirk for 6.2-rc5: - Check whether EFI runtime is available when registering the ACPI PRM address space handler and when running it (Ard Biesheuvel). - Add backlight=native DMI quirk for Acer Aspire 4810T to the ACPI video driver (Hans de Goede). * acpi-prm: ACPI: PRM: Check whether EFI runtime is available * acpi-video: ACPI: video: Add backlight=native DMI quirk for Acer Aspire 4810T |
||
|
Greg Kroah-Hartman
|
2e4a4e3628 |
cacheinfo and arch_topology updates for v6.3
The main change is to build the cache topology information for all
the CPUs from the primary CPU. Currently the cacheinfo for secondary CPUs
is created during the early boot on the respective CPU itself. Preemption
and interrupts are disabled at this stage. On PREEMPT_RT kernels, allocating
memory and even parsing the PPTT table for ACPI based systems triggers a:
'BUG: sleeping function called from invalid context'
To prevent this bug, the cacheinfo is now allocated from the primary CPU
when preemption and interrupts are enabled and before booting secondary
CPUs. The cache levels/leaves are computed from DT/ACPI PPTT information
only, without relying on any architecture specific mechanism if done so
early.
The other minor change included here is to handle shared caches at
different levels when not all the CPUs on the system have the same
cache hierarchy.
-----BEGIN PGP SIGNATURE-----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=nH4b
-----END PGP SIGNATURE-----
Merge tag 'archtopo-cacheinfo-updates-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into driver-core-next
Sudeep writes:
"cacheinfo and arch_topology updates for v6.3
The main change is to build the cache topology information for all
the CPUs from the primary CPU. Currently the cacheinfo for secondary CPUs
is created during the early boot on the respective CPU itself. Preemption
and interrupts are disabled at this stage. On PREEMPT_RT kernels, allocating
memory and even parsing the PPTT table for ACPI based systems triggers a:
'BUG: sleeping function called from invalid context'
To prevent this bug, the cacheinfo is now allocated from the primary CPU
when preemption and interrupts are enabled and before booting secondary
CPUs. The cache levels/leaves are computed from DT/ACPI PPTT information
only, without relying on any architecture specific mechanism if done so
early.
The other minor change included here is to handle shared caches at
different levels when not all the CPUs on the system have the same
cache hierarchy."
* tag 'archtopo-cacheinfo-updates-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
cacheinfo: Fix shared_cpu_map to handle shared caches at different levels
arch_topology: Build cacheinfo from primary CPU
ACPI: PPTT: Update acpi_find_last_cache_level() to acpi_get_cache_info()
ACPI: PPTT: Remove acpi_find_cache_levels()
cacheinfo: Check 'cache-unified' property to count cache leaves
cacheinfo: Return error code in init_of_cache_level()
cacheinfo: Use RISC-V's init_cache_level() as generic OF implementation
|
||
|
Juergen Gross
|
fe0ba8c23f |
acpi: Fix suspend with Xen PV
Commit |
||
|
Armin Wolf
|
f2ac14b5f1 |
ACPI: battery: Fix missing NUL-termination with large strings
When encountering a string bigger than the destination buffer (32 bytes),
the string is not properly NUL-terminated, causing buffer overreads later.
This for example happens on the Inspiron 3505, where the battery
model name is larger than 32 bytes, which leads to sysfs showing
the model name together with the serial number string (which is
NUL-terminated and thus prevents worse).
Fix this by using strscpy() which ensures that the result is
always NUL-terminated.
Fixes:
|
||
|
Ard Biesheuvel
|
182da6f2b8 |
ACPI: PRM: Check whether EFI runtime is available
The ACPI PRM address space handler calls efi_call_virt_pointer() to
execute PRM firmware code, but doing so is only permitted when the EFI
runtime environment is available. Otherwise, such calls are guaranteed
to result in a crash, and must therefore be avoided.
Given that the EFI runtime services may become unavailable after a crash
occurring in the firmware, we need to check this each time the PRM
address space handler is invoked. If the EFI runtime services were not
available at registration time to being with, don't install the address
space handler at all.
Fixes:
|
||
|
Pierre Gondois
|
bd500361a9 |
ACPI: PPTT: Update acpi_find_last_cache_level() to acpi_get_cache_info()
acpi_find_last_cache_level() allows to find the last level of cache for a given CPU. The function is only called on arm64 ACPI based platforms to check for cache information that would be missing in the CLIDR_EL1 register. To allow populating (struct cpu_cacheinfo).num_leaves by only parsing a PPTT, update acpi_find_last_cache_level() to get the 'split_levels', i.e. the number of cache levels being split in data/instruction caches. It is assumed that there will not be data/instruction caches above a unified cache. If a split level consist of one data cache and no instruction cache (or opposite), then the missing cache will still be populated by default with minimal cache information, and maximal cpumask (all non-existing caches have the same fw_token). Suggested-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Pierre Gondois <pierre.gondois@arm.com> Reviewed-by: Jeremy Linton <jeremy.linton@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Link: https://lore.kernel.org/r/20230104183033.755668-6-pierre.gondois@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> |
||
|
Pierre Gondois
|
fa4d566a60 |
ACPI: PPTT: Remove acpi_find_cache_levels()
acpi_find_cache_levels() is used at a single place and is short enough to be merged into the calling function. The removal allows an easier renaming of the calling function in the next patch. Also reorder the local variables in the 'reversed Christmas tree' order. Signed-off-by: Pierre Gondois <pierre.gondois@arm.com> Reviewed-by: Jeremy Linton <jeremy.linton@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Link: https://lore.kernel.org/r/20230104183033.755668-5-pierre.gondois@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> |
||
|
Hans de Goede
|
8ba5fc4c15 |
ACPI: video: Add backlight=native DMI quirk for Acer Aspire 4810T
The Acer Aspire 4810T predates Windows 8, so it defaults to using acpi_video# for backlight control, but this is non functional on this model. Add a DMI quirk to use the native backlight interface which does work properly. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Rafael J. Wysocki
|
28a35ac2f5 |
ACPI: PNP: Introduce list of known non-PNP devices
In some cases, PNP device IDs from acpi_pnp_device_ids[] are returned by _CID for devices for which matching platform drivers are present in the kernel and should be bound to them. However, the IDs coming from _CID cause the PNP scan handler to attach to those devices which prevents platform device objects from being created for them. Address this by introducing a list of known non-PNP device IDs into acpi_pnp.c such that if a device ID is there in that list, it cannot be attached to by the PNP scan handler and add the platform runtime update and telemetry device IDs to that list to start with. Reported-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Zhang Yang <Yang5.zhang@intel.com> |
||
|
Rafael J. Wysocki
|
8133844a8f |
PCI/ACPI: Account for _S0W of the target bridge in acpi_pci_bridge_d3()
It is questionable to allow a PCI bridge to go into D3 if it has _S0W returning D2 or a shallower power state, so modify acpi_pci_bridge_d3(() to always take the return value of _S0W for the target bridge into account. That is, make it return 'false' if _S0W returns D2 or a shallower power state for the target bridge regardless of its ancestor Root Port properties. Of course, this also causes 'false' to be returned if the Root Port itself is the target and its _S0W returns D2 or a shallower power state. However, still allow bridges without _S0W that are power-manageable via ACPI to enter D3 to retain the current code behavior in that case. This fixes problems where a hotplug notification is missed because a bridge is in D3. That means hot-added devices such as USB4 docks (and the devices they contain) and Thunderbolt 3 devices may not work. Link: https://lore.kernel.org/linux-pci/20221031223356.32570-1-mario.limonciello@amd.com/ Link: https://lore.kernel.org/r/12155458.O9o76ZdvQC@kreacher Reported-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Peter Zijlstra
|
6a123d6ae6 |
cpuidle, ACPI: Make noinstr clean
objtool found cases where ACPI methods called out into instrumentation code: vmlinux.o: warning: objtool: io_idle+0xc: call to __inb.isra.0() leaves .noinstr.text section vmlinux.o: warning: objtool: acpi_idle_enter+0xfe: call to num_online_cpus() leaves .noinstr.text section vmlinux.o: warning: objtool: acpi_idle_enter+0x115: call to acpi_idle_fallback_to_c1.isra.0() leaves .noinstr.text section Fix this by: marking the IO in/out, acpi_idle_fallback_to_c1() and num_online_cpus() methods as __always_inline. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20230112195541.294846301@infradead.org |
||
|
Peter Zijlstra
|
8ce78470bf |
acpi_idle: Remove tracing
All the idle routines are called with RCU disabled, as such there must not be any tracing inside. While there; clean-up the io-port idle thing. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20230112195540.251666856@infradead.org |
||
|
Peter Zijlstra
|
a01353cf18 |
cpuidle: Fix ct_idle_*() usage
The whole disable-RCU, enable-IRQS dance is very intricate since changing IRQ state is traced, which depends on RCU. Add two helpers for the cpuidle case that mirror the entry code: ct_cpuidle_enter() ct_cpuidle_exit() And fix all the cases where the enter/exit dance was buggy. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20230112195540.130014793@infradead.org |
||
|
Peter Zijlstra
|
0c5ffc3d7b |
cpuidle, dt: Push RCU-idle into driver
Doing RCU-idle outside the driver, only to then temporarily enable it again before going idle is suboptimal. Notably: this converts all dt_init_idle_driver() and __CPU_PM_CPU_IDLE_ENTER() users for they are inextrably intertwined. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20230112195540.068981667@infradead.org |
||
|
Rafael J. Wysocki
|
df3a71aba4 |
Merge branches 'acpi-resource' and 'acpi-video'
Merge an ACPI resource management quirk and an ACPI backlight driver fix for 6.2-rc4: - Skip ACPI IRQ override on Asus Expertbook B2402CBA (Tamim Khan). - Add missing support for manual selection of NVidia-WMI-EC or Apple GMUX backlight in the kernel command line to the ACPI backlight driver (Hans de Goede). * acpi-resource: ACPI: resource: Skip IRQ override on Asus Expertbook B2402CBA * acpi-video: ACPI: video: Allow selecting NVidia-WMI-EC or Apple GMUX backlight from the cmdline |
||
|
Hans de Goede
|
f64e4275ef |
ACPI: Fix selecting wrong ACPI fwnode for the iGPU on some Dell laptops
The Dell Latitude E6430 both with and without the optional NVidia dGPU
has a bug in its ACPI tables which is causing Linux to assign the wrong
ACPI fwnode / companion to the pci_device for the i915 iGPU.
Specifically under the PCI root bridge there are these 2 ACPI Device()s :
Scope (_SB.PCI0)
{
Device (GFX0)
{
Name (_ADR, 0x00020000) // _ADR: Address
}
...
Device (VID)
{
Name (_ADR, 0x00020000) // _ADR: Address
...
Method (_DOS, 1, NotSerialized) // _DOS: Disable Output Switching
{
VDP8 = Arg0
VDP1 (One, VDP8)
}
Method (_DOD, 0, NotSerialized) // _DOD: Display Output Devices
{
...
}
...
}
}
The non-functional GFX0 ACPI device is a problem, because this gets
returned as ACPI companion-device by acpi_find_child_device() for the iGPU.
This is a long standing problem and the i915 driver does use the ACPI
companion for some things, but works fine without it.
However since commit
|
||
|
Hans de Goede
|
420a1116ae |
ACPI: video: Allow selecting NVidia-WMI-EC or Apple GMUX backlight from the cmdline
The patches adding NVidia-WMI-EC and Apple GMUX backlight detection support to acpi_video_get_backlight_type(), forgot to update acpi_video_parse_cmdline() to allow manually selecting these from the commandline. Add support for these to acpi_video_parse_cmdline(). Fixes: |
||
|
Daniil Tatianin
|
ca843a4c79 |
ACPICA: nsrepair: handle cases without a return value correctly
Previously acpi_ns_simple_repair() would crash if expected_btypes
contained any combination of ACPI_RTYPE_NONE with a different type,
e.g | ACPI_RTYPE_INTEGER because of slightly incorrect logic in the
!return_object branch, which wouldn't return AE_AML_NO_RETURN_VALUE
for such cases.
Found by Linux Verification Center (linuxtesting.org) with the SVACE
static analysis tool.
Link: https://github.com/acpica/acpica/pull/811
Fixes:
|
||
|
Tamim Khan
|
77c7248882 |
ACPI: resource: Skip IRQ override on Asus Expertbook B2402CBA
Like the Asus Expertbook B2502CBA and various Asus Vivobook laptops, the Asus Expertbook B2402CBA has an ACPI DSDT table that describes IRQ 1 as ActiveLow while the kernel overrides it to Edge_High. This prevents the keyboard from working. To fix this issue, add this laptop to the skip_override_table so that the kernel does not override IRQ 1. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216864 Tested-by: zelenat <zelenat@gmail.com> Signed-off-by: Tamim Khan <tamim@fusetak.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Ira Weiny
|
589c335737 |
PCI/CXL: Export native CXL error reporting control
CXL _OSC Error Reporting Control is used by the OS to determine if Firmware has control of various CXL error reporting capabilities including the event logs. Expose the result of negotiating CXL Error Reporting Control in struct pci_host_bridge for consumption by the CXL drivers. Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: linux-pci@vger.kernel.org Cc: linux-acpi@vger.kernel.org Signed-off-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/20221212070627.1372402-2-ira.weiny@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
|
Linus Torvalds
|
c8451c141e |
ACPI fixes for 6.2-rc2
- Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo
14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund, Erik
Schumacher).
- Adjust ACPI video detection fallback path to prevent non-operational
ACPI backlight devices from being created on systems where the native
driver does not detect a suitable panel (Mario Limonciello).
- Fix Apple GMUX backlight detection (Hans de Goede).
- Add a low-power S0 idle (S0ix) handling quirk for HP Elitebook 865
and stop using AMD-specific low-power S0 idle code path for systems
with Rembrandt chips and newer (Mario Limonciello).
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmOvEHkSHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxamEP90CinO50RUcM6foz9G1phgtgTov3Y/M8
tvA+yymLUHN2UWmtbpLDQp1/xlCTRpZnfouzbkAzlgByMpk5xTmIT8/9gI+EjjPy
zzT8UIbaXI3EkYXCcTkikx3n6Y5N8l3Un3Ro83cUNMHiU/PjYWvfSG/lNaCiqz2n
kLuwOtbeOa3S+5VB4D4Lx6Cg6e+Q0zGGV6dXm22dSbjATDsbUelHf+uK3+dU4jc1
6cLCNrB5W30FGExmh7M9BgbQ/P4GYctUp3YWtXaDYJyl5lRYr0rd09qriLA6vmwd
gb++i8f3ThyB2ha7Hq61atvWU5F5LuGKMdQTUlbdgtGujFuBchj2Yo9RtdWC0m1/
qAVh0PnfpjgltHIroYy6+E2sNIanhpHh22LrqcXuVQgEeI7lc9c3OdJHUPJscyhg
HfDJkuvqvvl7j9gHLsJL5LPvwVEOco3oSrlmFTMBNdzx4Owd5ikhu4M0R6jbGmqQ
HO56Tne1TryFq8OoyzGTp9EJydfqjUc2TQ9TIq/Qdx2dCkMD9mKDf2AS0rBmXyzA
FICOYJPSwKKonjPFuAk3ujTLeVll0CZc76DG3ZFqBi3shZP7SAWZjiINdD/WrpyH
T5f9afOkCkFNO26mtdUOKp5+XuQMTsUYrvrlHp/c+ef37mc1nmkKPjpE81+1Ewqj
yvEDmlDKw3Q=
=rSWr
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These are new ACPI IRQ override quirks, low-power S0 idle (S0ix)
support adjustments and ACPI backlight handling fixes, mostly for
platforms using AMD chips.
Specifics:
- Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo
14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund, Erik
Schumacher).
- Adjust ACPI video detection fallback path to prevent
non-operational ACPI backlight devices from being created on
systems where the native driver does not detect a suitable panel
(Mario Limonciello).
- Fix Apple GMUX backlight detection (Hans de Goede).
- Add a low-power S0 idle (S0ix) handling quirk for HP Elitebook 865
and stop using AMD-specific low-power S0 idle code path for systems
with Rembrandt chips and newer (Mario Limonciello)"
* tag 'acpi-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: x86: s2idle: Stop using AMD specific codepath for Rembrandt+
ACPI: x86: s2idle: Force AMD GUID/_REV 2 on HP Elitebook 865
ACPI: video: Fix Apple GMUX backlight detection
ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks
ACPI: resource: do IRQ override on Lenovo 14ALC7
ACPI: resource: do IRQ override on XMG Core 15
ACPI: video: Don't enable fallback path for creating ACPI backlight by default
drm/amd/display: Report to ACPI video if no panels were found
ACPI: video: Allow GPU drivers to report no panels
|
||
|
Ammar Faizi
|
446c85af66 |
ACPI: Silence missing prototype warnings
Compiling with clang-16: drivers/acpi/acpi_lpit.c:142:6: error: no previous prototype \ for function 'acpi_init_lpit' [-Werror,-Wmissing-prototypes] drivers/acpi/ioapic.c:212:6: error: no previous prototype \ for function 'pci_ioapic_remove' [-Werror,-Wmissing-prototypes] drivers/acpi/ioapic.c:229:5: error: no previous prototype \ for function 'acpi_ioapic_remove' [-Werror,-Wmissing-prototypes] Include "internal.h" to silence them. Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Rafael J. Wysocki
|
99387b0160 |
ACPI: processor: perflib: Avoid updating frequency QoS unnecessarily
Modify acpi_processor_get_platform_limit() to avoid updating its frequency QoS request when the _PPC return value has not changed by comparing that value to the previous _PPC return value stored in the performance_platform_limit field of the struct acpi_processor corresponding to the given CPU. While at it, do the _PPC return value check against the state count earlier, to avoid setting performance_platform_limit to an invalid value, and make acpi_processor_ppc_init() use FREQ_QOS_MAX_DEFAULT_VALUE as the "no limit" frequency QoS for consistency. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Rafael J. Wysocki
|
c02d5feb6e |
ACPI: processor: perflib: Use the "no limit" frequency QoS
When _PPC returns 0, it means that the CPU frequency is not limited by the platform firmware, so make acpi_processor_get_platform_limit() update the frequency QoS request used by it to "no limit" in that case. This addresses a problem with limiting CPU frequency artificially on some systems after CPU offline/online to the frequency that corresponds to the first entry in the _PSS return package. Reported-by: Pratyush Yadav <ptyadav@amazon.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Pratyush Yadav <ptyadav@amazon.de> Tested-by: Pratyush Yadav <ptyadav@amazon.de> |
||
|
Zhou jie
|
fbf757e55a |
ACPI: processor: idle: Drop unnecessary (void *) conversion
The (void *) type pointer does not need to be cast, so don't do that in lapic_timer_check_state(). Signed-off-by: Zhou jie <zhoujie@nfschina.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Sakari Ailus
|
91fdb91ccc |
ACPICA: Constify pathname argument for acpi_get_handle()
acpi_get_handle() uses the pathname argument to find a handle related to that pathname but it does not need to modify it. Make it const, in order to be able to pass const pathname to it. Link: https://github.com/acpica/acpica/pull/773 Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Mario Limonciello
|
e1d9148582 |
ACPICA: Drop port I/O validation for some regions
Microsoft introduced support in Windows XP for blocking port I/O
to various regions. For Windows compatibility ACPICA has adopted
the same protections and will disallow writes to those
(presumably) the same regions.
On some systems the AML included with the firmware will issue 4 byte
long writes to 0x80. These writes aren't making it over because of this
blockage. The first 4 byte write attempt is rejected, and then
subsequently 1 byte at a time each offset is tried. The first at 0x80
works, but then the next 3 bytes are rejected.
This manifests in bizarre failures for devices that expected the AML to
write all 4 bytes. Trying the same AML on Windows 10 or 11 doesn't hit
this failure and all 4 bytes are written.
Either some of these regions were wrong or some point after Windows XP
some of these regions blocks have been lifted.
In the last 15 years there doesn't seem to be any reports popping up of
this error in the Windows event viewer anymore. There is no documentation
at Microsoft's developer site indicating that Windows ACPI interpreter
blocks these regions. Between the lack of documentation and the fact that
the writes actually do work in Windows 10 and 11, it's quite likely
Windows doesn't actually enforce this anymore.
So to help the issue, only enforce Windows XP specific entries if the
latest _OSI supported is Windows XP. Continue to enforce the
ALWAYS_ILLEGAL entries.
Link: https://github.com/acpica/acpica/pull/817
Fixes:
|
||
|
Hans de Goede
|
73d15a7c13 |
ACPI: PMIC: Add pmic_i2c_address to BYT Crystal Cove support
Add a pmic_i2c_address entry to intel_pmic_bytcrc.c, so that intel_soc_pmic_exec_mipi_pmic_seq_element() can be used on devices with a Bay Trail Crystal Cove PMIC OpRegion driver. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Stuart Hayes
|
6ad90f7112 |
ACPI: tables: Add support for NBFT
Add support for the NVMe Boot Firmware Table (NBFT) to facilitate booting from NVM Express namespaces which are accessed via NVMe over Fabrics (NVMe-oF). Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com> Reviewed-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Rafael J. Wysocki
|
0948a9ef1d |
Merge branches 'acpi-resource' and 'acpi-video'
Merge ACPI resource handling quirks and ACPI backlight handling fixes for 6.2-rc2: - Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo 14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund, Erik Schumacher). - Adjust ACPI video detection fallback path to prevent non-operational ACPI backlight devices from being created on systems where the native driver does not detect a suitable panel (Mario Limonciello). - Fix Apple GMUX backlight detection (Hans de Goede). * acpi-resource: ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks ACPI: resource: do IRQ override on Lenovo 14ALC7 ACPI: resource: do IRQ override on XMG Core 15 * acpi-video: ACPI: video: Fix Apple GMUX backlight detection ACPI: video: Don't enable fallback path for creating ACPI backlight by default drm/amd/display: Report to ACPI video if no panels were found ACPI: video: Allow GPU drivers to report no panels |
||
|
Steven Rostedt (Google)
|
292a089d78 |
treewide: Convert del_timer*() to timer_shutdown*()
Due to several bugs caused by timers being re-armed after they are
shutdown and just before they are freed, a new state of timers was added
called "shutdown". After a timer is set to this state, then it can no
longer be re-armed.
The following script was run to find all the trivial locations where
del_timer() or del_timer_sync() is called in the same function that the
object holding the timer is freed. It also ignores any locations where
the timer->function is modified between the del_timer*() and the free(),
as that is not considered a "trivial" case.
This was created by using a coccinelle script and the following
commands:
$ cat timer.cocci
@@
expression ptr, slab;
identifier timer, rfield;
@@
(
- del_timer(&ptr->timer);
+ timer_shutdown(&ptr->timer);
|
- del_timer_sync(&ptr->timer);
+ timer_shutdown_sync(&ptr->timer);
)
... when strict
when != ptr->timer
(
kfree_rcu(ptr, rfield);
|
kmem_cache_free(slab, ptr);
|
kfree(ptr);
)
$ spatch timer.cocci . > /tmp/t.patch
$ patch -p1 < /tmp/t.patch
Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ]
Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ]
Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Mario Limonciello
|
e555c85792 |
ACPI: x86: s2idle: Stop using AMD specific codepath for Rembrandt+
After we introduced a module parameter and quirk infrastructure for
picking the Microsoft GUID over the SOC vendor GUID we discovered
that lots and lots of systems are getting this wrong.
The table continues to grow, and is becoming unwieldy.
We don't really have any benefit to forcing vendors to populate the
AMD GUID. This is just extra work, and more and more vendors seem
to mess it up. As the Microsoft GUID is used by Windows as well,
it's very likely that it won't be messed up like this.
So drop all the quirks forcing it and the Rembrandt behavior. This
means that Cezanne or later effectively only run the Microsoft GUID
codepath with the exception of HP Elitebook 8*5 G9.
Fixes:
|
||
|
Mario Limonciello
|
3ea45390e9 |
ACPI: x86: s2idle: Force AMD GUID/_REV 2 on HP Elitebook 865
HP Elitebook 865 supports both the AMD GUID w/ _REV 2 and Microsoft GUID with _REV 0. Both have very similar code but the AMD GUID has a special workaround that is specific to a problem with spurious wakeups on systems with Qualcomm WLAN. This is believed to be a bug in the Qualcomm WLAN F/W (it doesn't affect any other WLAN H/W). If this WLAN firmware is fixed this quirk can be dropped. Cc: stable@vger.kernel.org # 6.1 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Hans de Goede
|
3cf3b7f012 |
ACPI: video: Fix Apple GMUX backlight detection
The apple-gmux driver only binds to old GMUX devices which have an
IORESOURCE_IO resource (using inb()/outb()) rather then memory-mapped
IO (IORESOURCE_MEM).
T2 MacBooks use the new style GMUX devices (with IORESOURCE_MEM access),
so these are not supported by the apple-gmux driver. This is not a problem
since they have working ACPI video backlight support.
But the apple_gmux_present() helper only checks if an ACPI device with
the "APP000B" HID is present, causing acpi_video_get_backlight_type()
to return acpi_backlight_apple_gmux disabling the acpi_video backlight
device.
Add a new apple_gmux_backlight_present() helper which checks that
the "APP000B" device actually is an old GMUX device with an IORESOURCE_IO
resource.
This fixes the acpi_video0 backlight no longer registering on T2 MacBooks.
Note people are working to add support for the new style GMUX to Linux:
https://github.com/kekrby/linux-t2/commits/wip/hybrid-graphics
Once this lands this patch should be reverted so that
acpi_video_get_backlight_type() also prefers the gmux on new style GMUX
MacBooks, but for now this is necessary to avoid regressing backlight
control on T2 Macs.
Fixes:
|
||
|
Hans de Goede
|
7203481fd1 |
ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks
The Asus ExpertBook B2502 has the same keyboard issue as Asus Vivobook
K3402ZA/K3502ZA. The kernel overrides IRQ 1 to Edge_High when it
should be Active_Low.
This patch adds the ExpertBook B2502 model to the existing
quirk list of Asus laptops with this issue.
Fixes:
|
||
|
Adrian Freund
|
f3cb9b7408 |
ACPI: resource: do IRQ override on Lenovo 14ALC7
Commit |
||
|
Erik Schumacher
|
7592b79ba4 |
ACPI: resource: do IRQ override on XMG Core 15
The Schenker XMG CORE 15 (M22) is Ryzen-6 based and needs IRQ overriding for the keyboard to work. Adding an entry for this laptop to the override_table makes the internal keyboard functional again. Signed-off-by: Erik Schumacher <ofenfisch@googlemail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Mario Limonciello
|
5aa9d943e9 |
ACPI: video: Don't enable fallback path for creating ACPI backlight by default
The ACPI video detection code has a module parameter `register_backlight_delay` which is currently configured to 8 seconds. This means that if after 8 seconds of booting no native driver has created a backlight device then the code will attempt to make an ACPI video backlight device. This was intended as a safety mechanism with the backlight overhaul that occurred in kernel 6.1, but as it doesn't appear necesssary set it to be disabled by default. Suggested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Mario Limonciello
|
00a734104a |
ACPI: video: Allow GPU drivers to report no panels
The current logic for the ACPI backlight detection will create a backlight device if no native or vendor drivers have created 8 seconds after the system has booted if the ACPI tables included backlight control methods. If the GPU drivers have loaded, they may be able to report whether any LCD panels were found. Allow using this information to factor in whether to enable the fallback logic for making an acpi_video0 backlight device. Suggested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Linus Torvalds
|
057b40f43c |
More ACPI updates for 6.2-rc1
- Avoid trying to resolve operands in AML when there are none (Amadeusz
Sławiński).
- Fix indentation in include/acpi/acpixf.h to help applying patches
from the upstream ACPICA git (Hans de Goede).
- Make it possible to install an address space handler without
evaluating _REG for Operation Regions in the given address space (Hans
de Goede).
- Defer the evaluation of _REG for ECDT described ECs till the matching
EC device in the DSDT gets parsed and acpi_ec_add() gets called for
it (Hans de Goede).
- Fix EC address space handler unregistration (Hans de Goede).
-----BEGIN PGP SIGNATURE-----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=HlyI
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These fix an AML byte code execution issue in ACPICA and two issues in
the ACPI EC driver which requires rearranging ACPICA code.
Specifics:
- Avoid trying to resolve operands in AML when there are none
(Amadeusz Sławiński)
- Fix indentation in include/acpi/acpixf.h to help applying patches
from the upstream ACPICA git (Hans de Goede)
- Make it possible to install an address space handler without
evaluating _REG for Operation Regions in the given address space
(Hans de Goede)
- Defer the evaluation of _REG for ECDT described ECs till the
matching EC device in the DSDT gets parsed and acpi_ec_add() gets
called for it (Hans de Goede)
- Fix EC address space handler unregistration (Hans de Goede)"
* tag 'acpi-6.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: Fix ECDT probe ordering issues
ACPI: EC: Fix EC address space handler unregistration
ACPICA: Allow address_space_handler Install and _REG execution as 2 separate steps
ACPICA: include/acpi/acpixf.h: Fix indentation
ACPICA: Fix operand resolution
|
||
|
Rafael J. Wysocki
|
3d03140c48 |
Merge branch 'acpi-ec'
Merge additional ACPI EC driver fixes for 6.2-rc1: - Fix EC address space handler unregistration (Hans de Goede). - Defer the evaluation of _REG for ECDT described ECs till the matching EC device in the DSDT gets parsed and acpi_ec_add() gets called for it (Hans de Goede). * acpi-ec: ACPI: EC: Fix ECDT probe ordering issues ACPI: EC: Fix EC address space handler unregistration |
||
|
Rafael J. Wysocki
|
f7eae09b50 |
Merge branch 'acpica'
Merge additional ACPICA changes for 6.2-rc1: - Avoid trying to resolve operands in AML when there are none (Amadeusz Sławiński). - Fix indentation in include/acpi/acpixf.h to help applying patches from the upstream ACPICA git (Hans de Goede). - Make it possible to install an address space handler without evaluating _REG for Operation Regions in the given address space (Hans de Goede). * acpica: ACPICA: Allow address_space_handler Install and _REG execution as 2 separate steps ACPICA: include/acpi/acpixf.h: Fix indentation ACPICA: Fix operand resolution |
||
|
Linus Torvalds
|
e2ca6ba6ba |
MM patches for 6.2-rc1.
- More userfaultfs work from Peter Xu. - Several convert-to-folios series from Sidhartha Kumar and Huang Ying. - Some filemap cleanups from Vishal Moola. - David Hildenbrand added the ability to selftest anon memory COW handling. - Some cpuset simplifications from Liu Shixin. - Addition of vmalloc tracing support by Uladzislau Rezki. - Some pagecache folioifications and simplifications from Matthew Wilcox. - A pagemap cleanup from Kefeng Wang: we have VM_ACCESS_FLAGS, so use it. - Miguel Ojeda contributed some cleanups for our use of the __no_sanitize_thread__ gcc keyword. This series shold have been in the non-MM tree, my bad. - Naoya Horiguchi improved the interaction between memory poisoning and memory section removal for huge pages. - DAMON cleanups and tuneups from SeongJae Park - Tony Luck fixed the handling of COW faults against poisoned pages. - Peter Xu utilized the PTE marker code for handling swapin errors. - Hugh Dickins reworked compound page mapcount handling, simplifying it and making it more efficient. - Removal of the autonuma savedwrite infrastructure from Nadav Amit and David Hildenbrand. - zram support for multiple compression streams from Sergey Senozhatsky. - David Hildenbrand reworked the GUP code's R/O long-term pinning so that drivers no longer need to use the FOLL_FORCE workaround which didn't work very well anyway. - Mel Gorman altered the page allocator so that local IRQs can remnain enabled during per-cpu page allocations. - Vishal Moola removed the try_to_release_page() wrapper. - Stefan Roesch added some per-BDI sysfs tunables which are used to prevent network block devices from dirtying excessive amounts of pagecache. - David Hildenbrand did some cleanup and repair work on KSM COW breaking. - Nhat Pham and Johannes Weiner have implemented writeback in zswap's zsmalloc backend. - Brian Foster has fixed a longstanding corner-case oddity in file[map]_write_and_wait_range(). - sparse-vmemmap changes for MIPS, LoongArch and NIOS2 from Feiyang Chen. - Shiyang Ruan has done some work on fsdax, to make its reflink mode work better under xfstests. Better, but still not perfect. - Christoph Hellwig has removed the .writepage() method from several filesystems. They only need .writepages(). - Yosry Ahmed wrote a series which fixes the memcg reclaim target beancounting. - David Hildenbrand has fixed some of our MM selftests for 32-bit machines. - Many singleton patches, as usual. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY5j6ZwAKCRDdBJ7gKXxA jkDYAP9qNeVqp9iuHjZNTqzMXkfmJPsw2kmy2P+VdzYVuQRcJgEAgoV9d7oMq4ml CodAgiA51qwzId3GRytIo/tfWZSezgA= =d19R -----END PGP SIGNATURE----- Merge tag 'mm-stable-2022-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - More userfaultfs work from Peter Xu - Several convert-to-folios series from Sidhartha Kumar and Huang Ying - Some filemap cleanups from Vishal Moola - David Hildenbrand added the ability to selftest anon memory COW handling - Some cpuset simplifications from Liu Shixin - Addition of vmalloc tracing support by Uladzislau Rezki - Some pagecache folioifications and simplifications from Matthew Wilcox - A pagemap cleanup from Kefeng Wang: we have VM_ACCESS_FLAGS, so use it - Miguel Ojeda contributed some cleanups for our use of the __no_sanitize_thread__ gcc keyword. This series should have been in the non-MM tree, my bad - Naoya Horiguchi improved the interaction between memory poisoning and memory section removal for huge pages - DAMON cleanups and tuneups from SeongJae Park - Tony Luck fixed the handling of COW faults against poisoned pages - Peter Xu utilized the PTE marker code for handling swapin errors - Hugh Dickins reworked compound page mapcount handling, simplifying it and making it more efficient - Removal of the autonuma savedwrite infrastructure from Nadav Amit and David Hildenbrand - zram support for multiple compression streams from Sergey Senozhatsky - David Hildenbrand reworked the GUP code's R/O long-term pinning so that drivers no longer need to use the FOLL_FORCE workaround which didn't work very well anyway - Mel Gorman altered the page allocator so that local IRQs can remnain enabled during per-cpu page allocations - Vishal Moola removed the try_to_release_page() wrapper - Stefan Roesch added some per-BDI sysfs tunables which are used to prevent network block devices from dirtying excessive amounts of pagecache - David Hildenbrand did some cleanup and repair work on KSM COW breaking - Nhat Pham and Johannes Weiner have implemented writeback in zswap's zsmalloc backend - Brian Foster has fixed a longstanding corner-case oddity in file[map]_write_and_wait_range() - sparse-vmemmap changes for MIPS, LoongArch and NIOS2 from Feiyang Chen - Shiyang Ruan has done some work on fsdax, to make its reflink mode work better under xfstests. Better, but still not perfect - Christoph Hellwig has removed the .writepage() method from several filesystems. They only need .writepages() - Yosry Ahmed wrote a series which fixes the memcg reclaim target beancounting - David Hildenbrand has fixed some of our MM selftests for 32-bit machines - Many singleton patches, as usual * tag 'mm-stable-2022-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (313 commits) mm/hugetlb: set head flag before setting compound_order in __prep_compound_gigantic_folio mm: mmu_gather: allow more than one batch of delayed rmaps mm: fix typo in struct pglist_data code comment kmsan: fix memcpy tests mm: add cond_resched() in swapin_walk_pmd_entry() mm: do not show fs mm pc for VM_LOCKONFAULT pages selftests/vm: ksm_functional_tests: fixes for 32bit selftests/vm: cow: fix compile warning on 32bit selftests/vm: madv_populate: fix missing MADV_POPULATE_(READ|WRITE) definitions mm/gup_test: fix PIN_LONGTERM_TEST_READ with highmem mm,thp,rmap: fix races between updates of subpages_mapcount mm: memcg: fix swapcached stat accounting mm: add nodes= arg to memory.reclaim mm: disable top-tier fallback to reclaim on proactive reclaim selftests: cgroup: make sure reclaim target memcg is unprotected selftests: cgroup: refactor proactive reclaim code to reclaim_until() mm: memcg: fix stale protection of reclaim target memcg mm/mmap: properly unaccount memory on mas_preallocate() failure omfs: remove ->writepage jfs: remove ->writepage ... |
||
|
Linus Torvalds
|
75f4d9af8b |
iov_iter work; most of that is about getting rid of
direction misannotations and (hopefully) preventing
more of the same for the future.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHQEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCY5ZzQAAKCRBZ7Krx/gZQ
65RZAP4nTkvOn0NZLVFkuGOx8pgJelXAvrteyAuecVL8V6CR4AD40qCVY51PJp8N
MzwiRTeqnGDxTTF7mgd//IB6hoatAA==
=bcvF
-----END PGP SIGNATURE-----
Merge tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull iov_iter updates from Al Viro:
"iov_iter work; most of that is about getting rid of direction
misannotations and (hopefully) preventing more of the same for the
future"
* tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
use less confusing names for iov_iter direction initializers
iov_iter: saner checks for attempt to copy to/from iterator
[xen] fix "direction" argument of iov_iter_kvec()
[vhost] fix 'direction' argument of iov_iter_{init,bvec}()
[target] fix iov_iter_bvec() "direction" argument
[s390] memcpy_real(): WRITE is "data source", not destination...
[s390] zcore: WRITE is "data source", not destination...
[infiniband] READ is "data destination", not source...
[fsi] WRITE is "data source", not destination...
[s390] copy_oldmem_kernel() - WRITE is "data source", not destination
csum_and_copy_to_iter(): handle ITER_DISCARD
get rid of unlikely() on page_copy_sane() calls
|
||
|
Linus Torvalds
|
7adcadb984 |
- Make ghes_edac a simple module like the rest of the EDAC drivers and
drop this forced built-in only configuration by disentangling it from GHES. Work by Jia He. - The usual small cleanups and improvements all over EDAC land -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmOXPvoACgkQEsHwGGHe VUq98xAAmhz4u9e9pXG0Ixkx25ZtnZ+YxANeQ53Hsa2gWicbcoFgL2E30gi97c1y X9W361B2Q5dYq+J/YRUnEOXlI/KMWLxzNykSvVipUFNfxXZH+PijEAArz2V35/uE 6ZISRLUYVYEtHEoUXbTogeyBmBUnIaJfYheZCluDQlWPggsDESP1qmE+FTg25OBs rDl5y+zUZYPxrWustNodVThPyhdMwGyYAUS6qYKCoNs9SNkAjGnrXoPc9j/U+cV+ qMY2dNS3uKnCujKEssQhcHucyWgCEDvmEKWMH4ItryV2UBBjpNRoM6HDe7XFKwVJ riOKX8VDrpdSdlV1jbCx9KB47BUwFygOYsFdW7gIDJ1hb8usN4nSYQNDIlZKEIQG cHNpv2XGT+pCSvyc4Iv2Fgyvnp25XensSQwQAtk5Y4/lJL1yrgcPjMOkPmRS+mmH BclDWNbL+gwqkyWxgfoivDBOetLgwJYTr2ewBr6QbBtwLB8rL4BxXIdomcoFPuxi jAxixZnTbS+Xq5S7uYK4r6KbaHGcJtwolXMGjx13IHmPfvYtTTQzfRcrBlAtQ/pV BDLoygmDVlkhSVx6bi5V5QZ06rcWYR4cRsBQ54FnBGMr730ZljgFONOHFtUab28T C+YUOaeLEYEYI0cIkkyoSuiz6avB6YvQAiyEPM0EdHZrQFwhBBw= =DFp8 -----END PGP SIGNATURE----- Merge tag 'edac_updates_for_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC updates from Borislav Petkov: - Make ghes_edac a simple module like the rest of the EDAC drivers and drop the forced built-in only configuration by disentangling it from GHES (Jia He) - The usual small cleanups and improvements all over EDAC land * tag 'edac_updates_for_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/i10nm: fix refcount leak in pci_get_dev_wrapper() EDAC/i5400: Fix typo in comment: vaious -> various EDAC/mc_sysfs: Increase legacy channel support to 12 MAINTAINERS: Make Mauro EDAC reviewer MAINTAINERS: Make Manivannan Sadhasivam the maintainer of qcom_edac EDAC/igen6: Return the correct error type when not the MC owner apei/ghes: Use xchg_release() for updating new cache slot instead of cmpxchg() EDAC: Check for GHES preference in the chipset-specific EDAC drivers EDAC/ghes: Make ghes_edac a proper module EDAC/ghes: Prepare to make ghes_edac a proper module EDAC/ghes: Add a notifier for reporting memory errors efi/cper: Export several helpers for ghes_edac to use EDAC/i5000: Mark as BROKEN |
||
|
Linus Torvalds
|
c1f0fcd85d |
cxl for 6.2
- Add the cpu_cache_invalidate_memregion() API for cache flushing in
response to physical memory reconfiguration, or memory-side data
invalidation from operations like secure erase or memory-device unlock.
- Add a facility for the kernel to warn about collisions between kernel
and userspace access to PCI configuration registers
- Add support for Restricted CXL Host (RCH) topologies (formerly CXL 1.1)
- Add handling and reporting of CXL errors reported via the PCIe AER
mechanism
- Add support for CXL Persistent Memory Security commands
- Add support for the "XOR" algorithm for CXL host bridge interleave
- Rework / simplify CXL to NVDIMM interactions
- Miscellaneous cleanups and fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCY5UpyAAKCRDfioYZHlFs
Z0ttAP4uxCjIibKsFVyexpSgI4vaZqQ9yt9NesmPwonc0XookwD+PlwP6Xc0d0Ox
t0gJ6+pwdh11NRzhcNE1pAaPcJZU4gs=
=HAQk
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl updates from Dan Williams:
"Compute Express Link (CXL) updates for 6.2.
While it may seem backwards, the CXL update this time around includes
some focus on CXL 1.x enabling where the work to date had been with
CXL 2.0 (VH topologies) in mind.
First generation CXL can mostly be supported via BIOS, similar to DDR,
however it became clear there are use cases for OS native CXL error
handling and some CXL 3.0 endpoint features can be deployed on CXL 1.x
hosts (Restricted CXL Host (RCH) topologies). So, this update brings
RCH topologies into the Linux CXL device model.
In support of the ongoing CXL 2.0+ enabling two new core kernel
facilities are added.
One is the ability for the kernel to flag collisions between userspace
access to PCI configuration registers and kernel accesses. This is
brought on by the PCIe Data-Object-Exchange (DOE) facility, a hardware
mailbox over config-cycles.
The other is a cpu_cache_invalidate_memregion() API that maps to
wbinvd_on_all_cpus() on x86. To prevent abuse it is disabled in guest
VMs and architectures that do not support it yet. The CXL paths that
need it, dynamic memory region creation and security commands (erase /
unlock), are disabled when it is not present.
As for the CXL 2.0+ this cycle the subsystem gains support Persistent
Memory Security commands, error handling in response to PCIe AER
notifications, and support for the "XOR" host bridge interleave
algorithm.
Summary:
- Add the cpu_cache_invalidate_memregion() API for cache flushing in
response to physical memory reconfiguration, or memory-side data
invalidation from operations like secure erase or memory-device
unlock.
- Add a facility for the kernel to warn about collisions between
kernel and userspace access to PCI configuration registers
- Add support for Restricted CXL Host (RCH) topologies (formerly CXL
1.1)
- Add handling and reporting of CXL errors reported via the PCIe AER
mechanism
- Add support for CXL Persistent Memory Security commands
- Add support for the "XOR" algorithm for CXL host bridge interleave
- Rework / simplify CXL to NVDIMM interactions
- Miscellaneous cleanups and fixes"
* tag 'cxl-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (71 commits)
cxl/region: Fix memdev reuse check
cxl/pci: Remove endian confusion
cxl/pci: Add some type-safety to the AER trace points
cxl/security: Drop security command ioctl uapi
cxl/mbox: Add variable output size validation for internal commands
cxl/mbox: Enable cxl_mbox_send_cmd() users to validate output size
cxl/security: Fix Get Security State output payload endian handling
cxl: update names for interleave ways conversion macros
cxl: update names for interleave granularity conversion macros
cxl/acpi: Warn about an invalid CHBCR in an existing CHBS entry
tools/testing/cxl: Require cache invalidation bypass
cxl/acpi: Fail decoder add if CXIMS for HBIG is missing
cxl/region: Fix spelling mistake "memergion" -> "memregion"
cxl/regs: Fix sparse warning
cxl/acpi: Set ACPI's CXL _OSC to indicate RCD mode support
tools/testing/cxl: Add an RCH topology
cxl/port: Add RCD endpoint port enumeration
cxl/mem: Move devm_cxl_add_endpoint() from cxl_core to cxl_mem
tools/testing/cxl: Add XOR Math support to cxl_test
cxl/acpi: Support CXL XOR Interleave Math (CXIMS)
...
|
||
|
Linus Torvalds
|
456ed864fd |
ACPI updates for 6.2-rc1
- Update the ACPICA code in the kernel to the 20221020 upstream
version and fix a couple of issues in it:
* Make acpi_ex_load_op() match upstream implementation (Rafael
Wysocki).
* Add support for loong_arch-specific APICs in MADT (Huacai Chen).
* Add support for fixed PCIe wake event (Huacai Chen).
* Add EBDA pointer sanity checks (Vit Kabele).
* Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele).
* Add CCEL table support to both compiler/disassembler (Kuppuswamy
Sathyanarayanan).
* Add a couple of new UUIDs to the known UUID list (Bob Moore).
* Add support for FFH Opregion special context data (Sudeep Holla).
* Improve warning message for "invalid ACPI name" (Bob Moore).
* Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT
table (Alison Schofield).
* Prepare IORT support for revision E.e (Robin Murphy).
* Finish support for the CDAT table (Bob Moore).
* Fix error code path in acpi_ds_call_control_method() (Rafael
Wysocki).
* Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li
Zetao).
* Update the version of the ACPICA code in the kernel (Bob Moore).
- Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device
enumeration code (Giulio Benetti).
- Change the return type of the ACPI driver remove callback to void and
update its users accordingly (Dawei Li).
- Add general support for FFH address space type and implement the low-
level part of it for ARM64 (Sudeep Holla).
- Fix stale comments in the ACPI tables parsing code and make it print
more messages related to MADT (Hanjun Guo, Huacai Chen).
- Replace invocations of generic library functions with more kernel-
specific counterparts in the ACPI sysfs interface (Christophe JAILLET,
Xu Panda).
- Print full name paths of ACPI power resource objects during
enumeration (Kane Chen).
- Eliminate a compiler warning regarding a missing function prototype
in the ACPI power management code (Sudeep Holla).
- Fix and clean up the ACPI processor driver (Rafael Wysocki, Li Zhong,
Colin Ian King, Sudeep Holla).
- Add quirk for the HP Pavilion Gaming 15-cx0041ur to the ACPI EC
driver (Mia Kanashi).
- Add some mew ACPI backlight handling quirks and update some existing
ones (Hans de Goede).
- Make the ACPI backlight driver prefer the native backlight control
over vendor backlight control when possible (Hans de Goede).
- Drop unsetting ACPI APEI driver data on remove (Uwe Kleine-König).
- Use xchg_release() instead of cmpxchg() for updating new GHES cache
slots (Ard Biesheuvel).
- Clean up the ACPI APEI code (Sudeep Holla, Christophe JAILLET, Jay Lu).
- Add new I2C device enumeration quirks for Medion Lifetab S10346 and
Lenovo Yoga Tab 3 Pro (YT3-X90F) (Hans de Goede).
- Make the ACPI battery driver notify user space about adding new
battery hooks and removing the existing ones (Armin Wolf).
- Modify the pfr_update and pfr_telemetry drivers to use ACPI_FREE()
for freeing acpi_object structures to help diagnostics (Wang ShaoBo).
- Make the ACPI fan driver use sysfs_emit_at() in its sysfs interface
code (ye xingchen).
- Fix the _FIF package extraction failure handling in the ACPI fan
driver (Hanjun Guo).
- Fix the PCC mailbox handling error code path (Huisong Li).
- Avoid using PCC Opregions if there is no platform interrupt allocated
for this purpose (Huisong Li).
- Use sysfs_emit() instead of scnprintf() in the ACPI PAD driver and
CPPC library (ye xingchen).
- Fix some kernel-doc issues in the ACPI GSI processing code (Xiongfeng
Wang).
- Fix name memory leak in pnp_alloc_dev() (Yang Yingliang).
- Do not disable PNP devices on suspend when they cannot be re-enabled
on resume (Hans de Goede).
- Clean up the ACPI thermal driver a bit (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmOXV10SHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxuOwP/2zew6val2Jf7I/Yxf1iQLlRyGmhFnaH
wpltJvBjlHjAUKnPQ/kLYK9fjuUY5HVgjOE03WpwhFUpmhftYTrSkhoVkJ1Mw9Zl
RNOAEgCG484ThHiTIVp/dMPxrtfuqpdbamhWX3Q51IfXjGW8Vc/lDxIa3k/JQxyq
ko8GFPCoebJrSCfuwaAf2+xSQaf6dq4jpL/rlIk+nYMMB9mQmXhNEhc+l97NaCe8
MyCIGynyNbhGsIlwdHRvTp04EIe8h0Z1+Dyns7g/TrzHj3Aezy7QVZbn8sKdZWa1
W/Ck9QST5tfpDWyr+hUXxUJjEn4Yy+GXjM2xON0EMx5q+JD9XsOpwWOVwTR7CS5s
FwEd6I89SC8OZM86AgMtnGxygjpK24R/kGzHjhG15IQCsypc8Rvzoxl0L0YVoon/
UTkE57GzNWVzu0pY/oXJc2aT7lVqFXMFZ6ft/zHnBRnQmrcIi+xgDO5ni5KxctFN
TVFwbAMCuwVx6IOcVQCZM2g4aJw426KpUn19fKnXvPwR5UIufBaCzSKWMiYrtdXr
O5BM8ElYuyKCWGYEE0GSMjZygyDpyY6ENLH7s7P1IEmFyigBzaaGBbKm108JJq4V
eCWJYTAx8pAptsU/vfuMvEQ1ErfhZ3TTokA5Lv0uPf53VcAnWDb7EAbW6ZGMwFSI
IaV6cv6ILoqO
=GVzp
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and PNP updates from Rafael Wysocki:
"These include new code (for instance, support for the FFH address
space type and support for new firmware data structures in ACPICA),
some new quirks (mostly related to backlight handling and I2C
enumeration), a number of fixes and a fair amount of cleanups all
over.
Specifics:
- Update the ACPICA code in the kernel to the 20221020 upstream
version and fix a couple of issues in it:
- Make acpi_ex_load_op() match upstream implementation (Rafael
Wysocki)
- Add support for loong_arch-specific APICs in MADT (Huacai Chen)
- Add support for fixed PCIe wake event (Huacai Chen)
- Add EBDA pointer sanity checks (Vit Kabele)
- Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele)
- Add CCEL table support to both compiler/disassembler (Kuppuswamy
Sathyanarayanan)
- Add a couple of new UUIDs to the known UUID list (Bob Moore)
- Add support for FFH Opregion special context data (Sudeep
Holla)
- Improve warning message for "invalid ACPI name" (Bob Moore)
- Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT
table (Alison Schofield)
- Prepare IORT support for revision E.e (Robin Murphy)
- Finish support for the CDAT table (Bob Moore)
- Fix error code path in acpi_ds_call_control_method() (Rafael
Wysocki)
- Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li
Zetao)
- Update the version of the ACPICA code in the kernel (Bob Moore)
- Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device
enumeration code (Giulio Benetti)
- Change the return type of the ACPI driver remove callback to void
and update its users accordingly (Dawei Li)
- Add general support for FFH address space type and implement the
low- level part of it for ARM64 (Sudeep Holla)
- Fix stale comments in the ACPI tables parsing code and make it
print more messages related to MADT (Hanjun Guo, Huacai Chen)
- Replace invocations of generic library functions with more kernel-
specific counterparts in the ACPI sysfs interface (Christophe
JAILLET, Xu Panda)
- Print full name paths of ACPI power resource objects during
enumeration (Kane Chen)
- Eliminate a compiler warning regarding a missing function prototype
in the ACPI power management code (Sudeep Holla)
- Fix and clean up the ACPI processor driver (Rafael Wysocki, Li
Zhong, Colin Ian King, Sudeep Holla)
- Add quirk for the HP Pavilion Gaming 15-cx0041ur to the ACPI EC
driver (Mia Kanashi)
- Add some mew ACPI backlight handling quirks and update some
existing ones (Hans de Goede)
- Make the ACPI backlight driver prefer the native backlight control
over vendor backlight control when possible (Hans de Goede)
- Drop unsetting ACPI APEI driver data on remove (Uwe Kleine-König)
- Use xchg_release() instead of cmpxchg() for updating new GHES cache
slots (Ard Biesheuvel)
- Clean up the ACPI APEI code (Sudeep Holla, Christophe JAILLET, Jay
Lu)
- Add new I2C device enumeration quirks for Medion Lifetab S10346 and
Lenovo Yoga Tab 3 Pro (YT3-X90F) (Hans de Goede)
- Make the ACPI battery driver notify user space about adding new
battery hooks and removing the existing ones (Armin Wolf)
- Modify the pfr_update and pfr_telemetry drivers to use ACPI_FREE()
for freeing acpi_object structures to help diagnostics (Wang
ShaoBo)
- Make the ACPI fan driver use sysfs_emit_at() in its sysfs interface
code (ye xingchen)
- Fix the _FIF package extraction failure handling in the ACPI fan
driver (Hanjun Guo)
- Fix the PCC mailbox handling error code path (Huisong Li)
- Avoid using PCC Opregions if there is no platform interrupt
allocated for this purpose (Huisong Li)
- Use sysfs_emit() instead of scnprintf() in the ACPI PAD driver and
CPPC library (ye xingchen)
- Fix some kernel-doc issues in the ACPI GSI processing code
(Xiongfeng Wang)
- Fix name memory leak in pnp_alloc_dev() (Yang Yingliang)
- Do not disable PNP devices on suspend when they cannot be
re-enabled on resume (Hans de Goede)
- Clean up the ACPI thermal driver a bit (Rafael Wysocki)"
* tag 'acpi-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (67 commits)
ACPI: x86: Add skip i2c clients quirk for Medion Lifetab S10346
ACPI: APEI: EINJ: Refactor available_error_type_show()
ACPI: APEI: EINJ: Fix formatting errors
ACPI: processor: perflib: Adjust acpi_processor_notify_smm() return value
ACPI: processor: perflib: Rearrange acpi_processor_notify_smm()
ACPI: processor: perflib: Rearrange unregistration routine
ACPI: processor: perflib: Drop redundant parentheses
ACPI: processor: perflib: Adjust white space
ACPI: processor: idle: Drop unnecessary statements and parens
ACPI: thermal: Adjust critical.flags.valid check
ACPI: fan: Convert to use sysfs_emit_at() API
ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage()
ACPI: battery: Call power_supply_changed() when adding hooks
ACPI: use sysfs_emit() instead of scnprintf()
ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Tab 3 Pro (YT3-X90F)
ACPI: APEI: Remove a useless include
PNP: Do not disable devices on suspend when they cannot be re-enabled on resume
ACPI: processor: Silence missing prototype warnings
ACPI: processor_idle: Silence missing prototype warnings
ACPI: PM: Silence missing prototype warning
...
|
||
|
Linus Torvalds
|
9d33edb20f |
Updates for the interrupt core and driver subsystem:
- Core:
The bulk is the rework of the MSI subsystem to support per device MSI
interrupt domains. This solves conceptual problems of the current
PCI/MSI design which are in the way of providing support for PCI/MSI[-X]
and the upcoming PCI/IMS mechanism on the same device.
IMS (Interrupt Message Store] is a new specification which allows device
manufactures to provide implementation defined storage for MSI messages
contrary to the uniform and specification defined storage mechanisms for
PCI/MSI and PCI/MSI-X. IMS not only allows to overcome the size limitations
of the MSI-X table, but also gives the device manufacturer the freedom to
store the message in arbitrary places, even in host memory which is shared
with the device.
There have been several attempts to glue this into the current MSI code,
but after lengthy discussions it turned out that there is a fundamental
design problem in the current PCI/MSI-X implementation. This needs some
historical background.
When PCI/MSI[-X] support was added around 2003, interrupt management was
completely different from what we have today in the actively developed
architectures. Interrupt management was completely architecture specific
and while there were attempts to create common infrastructure the
commonalities were rudimentary and just providing shared data structures and
interfaces so that drivers could be written in an architecture agnostic
way.
The initial PCI/MSI[-X] support obviously plugged into this model which
resulted in some basic shared infrastructure in the PCI core code for
setting up MSI descriptors, which are a pure software construct for holding
data relevant for a particular MSI interrupt, but the actual association to
Linux interrupts was completely architecture specific. This model is still
supported today to keep museum architectures and notorious stranglers
alive.
In 2013 Intel tried to add support for hot-pluggable IO/APICs to the kernel,
which was creating yet another architecture specific mechanism and resulted
in an unholy mess on top of the existing horrors of x86 interrupt handling.
The x86 interrupt management code was already an incomprehensible maze of
indirections between the CPU vector management, interrupt remapping and the
actual IO/APIC and PCI/MSI[-X] implementation.
At roughly the same time ARM struggled with the ever growing SoC specific
extensions which were glued on top of the architected GIC interrupt
controller.
This resulted in a fundamental redesign of interrupt management and
provided the today prevailing concept of hierarchical interrupt
domains. This allowed to disentangle the interactions between x86 vector
domain and interrupt remapping and also allowed ARM to handle the zoo of
SoC specific interrupt components in a sane way.
The concept of hierarchical interrupt domains aims to encapsulate the
functionality of particular IP blocks which are involved in interrupt
delivery so that they become extensible and pluggable. The X86
encapsulation looks like this:
|--- device 1
[Vector]---[Remapping]---[PCI/MSI]--|...
|--- device N
where the remapping domain is an optional component and in case that it is
not available the PCI/MSI[-X] domains have the vector domain as their
parent. This reduced the required interaction between the domains pretty
much to the initialization phase where it is obviously required to
establish the proper parent relation ship in the components of the
hierarchy.
While in most cases the model is strictly representing the chain of IP
blocks and abstracting them so they can be plugged together to form a
hierarchy, the design stopped short on PCI/MSI[-X]. Looking at the hardware
it's clear that the actual PCI/MSI[-X] interrupt controller is not a global
entity, but strict a per PCI device entity.
Here we took a short cut on the hierarchical model and went for the easy
solution of providing "global" PCI/MSI domains which was possible because
the PCI/MSI[-X] handling is uniform across the devices. This also allowed
to keep the existing PCI/MSI[-X] infrastructure mostly unchanged which in
turn made it simple to keep the existing architecture specific management
alive.
A similar problem was created in the ARM world with support for IP block
specific message storage. Instead of going all the way to stack a IP block
specific domain on top of the generic MSI domain this ended in a construct
which provides a "global" platform MSI domain which allows overriding the
irq_write_msi_msg() callback per allocation.
In course of the lengthy discussions we identified other abuse of the MSI
infrastructure in wireless drivers, NTB etc. where support for
implementation specific message storage was just mindlessly glued into the
existing infrastructure. Some of this just works by chance on particular
platforms but will fail in hard to diagnose ways when the driver is used
on platforms where the underlying MSI interrupt management code does not
expect the creative abuse.
Another shortcoming of today's PCI/MSI-X support is the inability to
allocate or free individual vectors after the initial enablement of
MSI-X. This results in an works by chance implementation of VFIO (PCI
pass-through) where interrupts on the host side are not set up upfront to
avoid resource exhaustion. They are expanded at run-time when the guest
actually tries to use them. The way how this is implemented is that the
host disables MSI-X and then re-enables it with a larger number of
vectors again. That works by chance because most device drivers set up
all interrupts before the device actually will utilize them. But that's
not universally true because some drivers allocate a large enough number
of vectors but do not utilize them until it's actually required,
e.g. for acceleration support. But at that point other interrupts of the
device might be in active use and the MSI-X disable/enable dance can
just result in losing interrupts and therefore hard to diagnose subtle
problems.
Last but not least the "global" PCI/MSI-X domain approach prevents to
utilize PCI/MSI[-X] and PCI/IMS on the same device due to the fact that IMS
is not longer providing a uniform storage and configuration model.
The solution to this is to implement the missing step and switch from
global PCI/MSI domains to per device PCI/MSI domains. The resulting
hierarchy then looks like this:
|--- [PCI/MSI] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
which in turn allows to provide support for multiple domains per device:
|--- [PCI/MSI] device 1
|--- [PCI/IMS] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
|--- [PCI/IMS] device N
This work converts the MSI and PCI/MSI core and the x86 interrupt
domains to the new model, provides new interfaces for post-enable
allocation/free of MSI-X interrupts and the base framework for PCI/IMS.
PCI/IMS has been verified with the work in progress IDXD driver.
There is work in progress to convert ARM over which will replace the
platform MSI train-wreck. The cleanup of VFIO, NTB and other creative
"solutions" are in the works as well.
- Drivers:
- Updates for the LoongArch interrupt chip drivers
- Support for MTK CIRQv2
- The usual small fixes and updates all over the place
-----BEGIN PGP SIGNATURE-----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=9erA
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt core and driver subsystem:
The bulk is the rework of the MSI subsystem to support per device MSI
interrupt domains. This solves conceptual problems of the current
PCI/MSI design which are in the way of providing support for
PCI/MSI[-X] and the upcoming PCI/IMS mechanism on the same device.
IMS (Interrupt Message Store] is a new specification which allows
device manufactures to provide implementation defined storage for MSI
messages (as opposed to PCI/MSI and PCI/MSI-X that has a specified
message store which is uniform accross all devices). The PCI/MSI[-X]
uniformity allowed us to get away with "global" PCI/MSI domains.
IMS not only allows to overcome the size limitations of the MSI-X
table, but also gives the device manufacturer the freedom to store the
message in arbitrary places, even in host memory which is shared with
the device.
There have been several attempts to glue this into the current MSI
code, but after lengthy discussions it turned out that there is a
fundamental design problem in the current PCI/MSI-X implementation.
This needs some historical background.
When PCI/MSI[-X] support was added around 2003, interrupt management
was completely different from what we have today in the actively
developed architectures. Interrupt management was completely
architecture specific and while there were attempts to create common
infrastructure the commonalities were rudimentary and just providing
shared data structures and interfaces so that drivers could be written
in an architecture agnostic way.
The initial PCI/MSI[-X] support obviously plugged into this model
which resulted in some basic shared infrastructure in the PCI core
code for setting up MSI descriptors, which are a pure software
construct for holding data relevant for a particular MSI interrupt,
but the actual association to Linux interrupts was completely
architecture specific. This model is still supported today to keep
museum architectures and notorious stragglers alive.
In 2013 Intel tried to add support for hot-pluggable IO/APICs to the
kernel, which was creating yet another architecture specific mechanism
and resulted in an unholy mess on top of the existing horrors of x86
interrupt handling. The x86 interrupt management code was already an
incomprehensible maze of indirections between the CPU vector
management, interrupt remapping and the actual IO/APIC and PCI/MSI[-X]
implementation.
At roughly the same time ARM struggled with the ever growing SoC
specific extensions which were glued on top of the architected GIC
interrupt controller.
This resulted in a fundamental redesign of interrupt management and
provided the today prevailing concept of hierarchical interrupt
domains. This allowed to disentangle the interactions between x86
vector domain and interrupt remapping and also allowed ARM to handle
the zoo of SoC specific interrupt components in a sane way.
The concept of hierarchical interrupt domains aims to encapsulate the
functionality of particular IP blocks which are involved in interrupt
delivery so that they become extensible and pluggable. The X86
encapsulation looks like this:
|--- device 1
[Vector]---[Remapping]---[PCI/MSI]--|...
|--- device N
where the remapping domain is an optional component and in case that
it is not available the PCI/MSI[-X] domains have the vector domain as
their parent. This reduced the required interaction between the
domains pretty much to the initialization phase where it is obviously
required to establish the proper parent relation ship in the
components of the hierarchy.
While in most cases the model is strictly representing the chain of IP
blocks and abstracting them so they can be plugged together to form a
hierarchy, the design stopped short on PCI/MSI[-X]. Looking at the
hardware it's clear that the actual PCI/MSI[-X] interrupt controller
is not a global entity, but strict a per PCI device entity.
Here we took a short cut on the hierarchical model and went for the
easy solution of providing "global" PCI/MSI domains which was possible
because the PCI/MSI[-X] handling is uniform across the devices. This
also allowed to keep the existing PCI/MSI[-X] infrastructure mostly
unchanged which in turn made it simple to keep the existing
architecture specific management alive.
A similar problem was created in the ARM world with support for IP
block specific message storage. Instead of going all the way to stack
a IP block specific domain on top of the generic MSI domain this ended
in a construct which provides a "global" platform MSI domain which
allows overriding the irq_write_msi_msg() callback per allocation.
In course of the lengthy discussions we identified other abuse of the
MSI infrastructure in wireless drivers, NTB etc. where support for
implementation specific message storage was just mindlessly glued into
the existing infrastructure. Some of this just works by chance on
particular platforms but will fail in hard to diagnose ways when the
driver is used on platforms where the underlying MSI interrupt
management code does not expect the creative abuse.
Another shortcoming of today's PCI/MSI-X support is the inability to
allocate or free individual vectors after the initial enablement of
MSI-X. This results in an works by chance implementation of VFIO (PCI
pass-through) where interrupts on the host side are not set up upfront
to avoid resource exhaustion. They are expanded at run-time when the
guest actually tries to use them. The way how this is implemented is
that the host disables MSI-X and then re-enables it with a larger
number of vectors again. That works by chance because most device
drivers set up all interrupts before the device actually will utilize
them. But that's not universally true because some drivers allocate a
large enough number of vectors but do not utilize them until it's
actually required, e.g. for acceleration support. But at that point
other interrupts of the device might be in active use and the MSI-X
disable/enable dance can just result in losing interrupts and
therefore hard to diagnose subtle problems.
Last but not least the "global" PCI/MSI-X domain approach prevents to
utilize PCI/MSI[-X] and PCI/IMS on the same device due to the fact
that IMS is not longer providing a uniform storage and configuration
model.
The solution to this is to implement the missing step and switch from
global PCI/MSI domains to per device PCI/MSI domains. The resulting
hierarchy then looks like this:
|--- [PCI/MSI] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
which in turn allows to provide support for multiple domains per
device:
|--- [PCI/MSI] device 1
|--- [PCI/IMS] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
|--- [PCI/IMS] device N
This work converts the MSI and PCI/MSI core and the x86 interrupt
domains to the new model, provides new interfaces for post-enable
allocation/free of MSI-X interrupts and the base framework for
PCI/IMS. PCI/IMS has been verified with the work in progress IDXD
driver.
There is work in progress to convert ARM over which will replace the
platform MSI train-wreck. The cleanup of VFIO, NTB and other creative
"solutions" are in the works as well.
Drivers:
- Updates for the LoongArch interrupt chip drivers
- Support for MTK CIRQv2
- The usual small fixes and updates all over the place"
* tag 'irq-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (134 commits)
irqchip/ti-sci-inta: Fix kernel doc
irqchip/gic-v2m: Mark a few functions __init
irqchip/gic-v2m: Include arm-gic-common.h
irqchip/irq-mvebu-icu: Fix works by chance pointer assignment
iommu/amd: Enable PCI/IMS
iommu/vt-d: Enable PCI/IMS
x86/apic/msi: Enable PCI/IMS
PCI/MSI: Provide pci_ims_alloc/free_irq()
PCI/MSI: Provide IMS (Interrupt Message Store) support
genirq/msi: Provide constants for PCI/IMS support
x86/apic/msi: Enable MSI_FLAG_PCI_MSIX_ALLOC_DYN
PCI/MSI: Provide post-enable dynamic allocation interfaces for MSI-X
PCI/MSI: Provide prepare_desc() MSI domain op
PCI/MSI: Split MSI-X descriptor setup
genirq/msi: Provide MSI_FLAG_MSIX_ALLOC_DYN
genirq/msi: Provide msi_domain_alloc_irq_at()
genirq/msi: Provide msi_domain_ops:: Prepare_desc()
genirq/msi: Provide msi_desc:: Msi_data
genirq/msi: Provide struct msi_map
x86/apic/msi: Remove arch_create_remap_msi_irq_domain()
...
|
||
|
Linus Torvalds
|
7a76117f9f |
platform-drivers-x86 for v6.2-1
Highlights:
- Intel:
- PMC: Add support for Meteor Lake
- Intel On Demand: various updates
- ideapad-laptop:
- Add support for various Fn keys on new models
- Fix touchpad on/off handling in a generic way to avoid having
to add more and more quirks
- android-x86-tablets: Add support for 2 more X86 Android tablet models
- New Dell WMI DDV driver
- Miscellaneous cleanups and small bugfixes
The following is an automated git shortlog grouped by driver:
ACPI:
- battery: Pass battery hook pointer to hook callbacks
ISST:
- Fix typo in comments
Move existing HP drivers to a new hp subdir:
- Move existing HP drivers to a new hp subdir
dell:
- Add new dell-wmi-ddv driver
dell-ddv:
- Warn if ePPID has a suspicious length
- Improve buffer handling
huawei-wmi:
- remove unnecessary member
- fix return value calculation
- do not hard-code sizes
ideapad-laptop:
- Make touchpad_ctrl_via_ec a module option
- Stop writing VPCCMD_W_TOUCHPAD at probe time
- Send KEY_TOUCHPAD_TOGGLE on some models
- Only toggle ps2 aux port on/off on select models
- Do not send KEY_TOUCHPAD* events on probe / resume
- Refactor ideapad_sync_touchpad_state()
- support for more special keys in WMI
- Add new _CFG bit numbers for future use
- Revert "check for touchpad support in _CFG"
intel/pmc:
- Relocate Alder Lake PCH support
- Relocate Tiger Lake PCH support
- Relocate Ice Lake PCH support
- Relocate Cannon Lake Point PCH support
- Relocate Sunrise Point PCH support
- Move variable declarations and definitions to header and core.c
- Replace all the reg_map with init functions
intel/pmc/core:
- Add Meteor Lake support to pmc core driver
intel_scu_ipc:
- fix possible name leak in __intel_scu_ipc_register()
mxm-wmi:
- fix memleak in mxm_wmi_call_mx[ds|mx]()
platform/mellanox:
- mlxbf-pmc: Fix event typo
- Add BlueField-3 support in the tmfifo driver
platform/x86/amd:
- pmc: Add a workaround for an s0i3 issue on Cezanne
platform/x86/amd/pmf:
- pass the struct by reference
platform/x86/dell:
- alienware-wmi: Use sysfs_emit() instead of scnprintf()
platform/x86/intel:
- pmc: Fix repeated word in comment
platform/x86/intel/hid:
- Add module-params for 5 button array + SW_TABLET_MODE reporting
platform/x86/intel/sdsi:
- Add meter certificate support
- Support different GUIDs
- Hide attributes if hardware doesn't support
- Add Intel On Demand text
sony-laptop:
- Convert to use sysfs_emit_at() API
thinkpad_acpi:
- use strstarts()
- Fix max_brightness of thinklight
tools/arch/x86:
- intel_sdsi: Add support for reading meter certificates
- intel_sdsi: Add support for new GUID
- intel_sdsi: Read more On Demand registers
- intel_sdsi: Add Intel On Demand text
- intel_sdsi: Add support for reading state certificates
uv_sysfs:
- Use sysfs_emit() instead of scnprintf()
wireless-hotkey:
- use ACPI HID as phys
x86-android-tablets:
- Add Advantech MICA-071 extra button
- Add Lenovo Yoga Tab 3 (YT3-X90F) charger + fuel-gauge data
- Add Medion Lifetab S10346 data
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmOW+QgUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9yAPwf/dAYLHiC2ox5YlNTLX2DvU+jOpeBv
W+EIx4oHQz1+O9jrWMLyvS9zTwTEAf6ANLiMP3damEvtJnB72ClgFITzlJAaB4zN
yj0SdxoBRMt6zDL2QwMkwitvb5kJonLfO2H7NsMwA6f0KP1X8sio3oVRAMMVwlzz
nwDKM/VBpuxmy+d880wRRoAkgRkTsPIOwBkYdo1525NU7kkTmtrMpgM+SXQsHTJn
TB9uQnyuiq5/znh3k1Qn+OGwXQezmGz2Fb76IcW5RzUQDew6n6b3kzILee5ddynT
Pa7/ibwpV+FtZjm2kS/l4tV+WPdA+s5TSWoq7Hz0jzBX9GdOORcMZmEneg==
=z16d
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- Intel:
- PMC: Add support for Meteor Lake
- Intel On Demand: various updates
- Ideapad-laptop:
- Add support for various Fn keys on new models
- Fix touchpad on/off handling in a generic way to avoid having to
add more and more quirks
- Android x86 tablets:
- Add support for two more X86 Android tablet models
- New Dell WMI DDV driver
- Miscellaneous cleanups and small bugfixes
* tag 'platform-drivers-x86-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (52 commits)
platform/mellanox: mlxbf-pmc: Fix event typo
platform/x86: intel_scu_ipc: fix possible name leak in __intel_scu_ipc_register()
platform/x86: sony-laptop: Convert to use sysfs_emit_at() API
platform/x86/dell: alienware-wmi: Use sysfs_emit() instead of scnprintf()
platform/x86: uv_sysfs: Use sysfs_emit() instead of scnprintf()
platform/x86: mxm-wmi: fix memleak in mxm_wmi_call_mx[ds|mx]()
platform/x86: x86-android-tablets: Add Advantech MICA-071 extra button
platform/x86: x86-android-tablets: Add Lenovo Yoga Tab 3 (YT3-X90F) charger + fuel-gauge data
platform/x86: x86-android-tablets: Add Medion Lifetab S10346 data
platform/x86: wireless-hotkey: use ACPI HID as phys
platform/x86/intel/hid: Add module-params for 5 button array + SW_TABLET_MODE reporting
platform/x86: ideapad-laptop: Make touchpad_ctrl_via_ec a module option
platform/x86: ideapad-laptop: Stop writing VPCCMD_W_TOUCHPAD at probe time
platform/x86: ideapad-laptop: Send KEY_TOUCHPAD_TOGGLE on some models
platform/x86: ideapad-laptop: Only toggle ps2 aux port on/off on select models
platform/x86: ideapad-laptop: Do not send KEY_TOUCHPAD* events on probe / resume
platform/x86: ideapad-laptop: Refactor ideapad_sync_touchpad_state()
tools/arch/x86: intel_sdsi: Add support for reading meter certificates
tools/arch/x86: intel_sdsi: Add support for new GUID
tools/arch/x86: intel_sdsi: Read more On Demand registers
...
|
||
|
Linus Torvalds
|
06cff4a58e |
arm64 updates for 6.2
ACPI:
* Enable FPDT support for boot-time profiling
* Fix CPU PMU probing to work better with PREEMPT_RT
* Update SMMUv3 MSI DeviceID parsing to latest IORT spec
* APMT support for probing Arm CoreSight PMU devices
CPU features:
* Advertise new SVE instructions (v2.1)
* Advertise range prefetch instruction
* Advertise CSSC ("Common Short Sequence Compression") scalar
instructions, adding things like min, max, abs, popcount
* Enable DIT (Data Independent Timing) when running in the kernel
* More conversion of system register fields over to the generated
header
CPU misfeatures:
* Workaround for Cortex-A715 erratum #2645198
Dynamic SCS:
* Support for dynamic shadow call stacks to allow switching at
runtime between Clang's SCS implementation and the CPU's
pointer authentication feature when it is supported (complete
with scary DWARF parser!)
Tracing and debug:
* Remove static ftrace in favour of, err, dynamic ftrace!
* Seperate 'struct ftrace_regs' from 'struct pt_regs' in core
ftrace and existing arch code
* Introduce and implement FTRACE_WITH_ARGS on arm64 to replace
the old FTRACE_WITH_REGS
* Extend 'crashkernel=' parameter with default value and fallback
to placement above 4G physical if initial (low) allocation
fails
SVE:
* Optimisation to avoid disabling SVE unconditionally on syscall
entry and just zeroing the non-shared state on return instead
Exceptions:
* Rework of undefined instruction handling to avoid serialisation
on global lock (this includes emulation of user accesses to the
ID registers)
Perf and PMU:
* Support for TLP filters in Hisilicon's PCIe PMU device
* Support for the DDR PMU present in Amlogic Meson G12 SoCs
* Support for the terribly-named "CoreSight PMU" architecture
from Arm (and Nvidia's implementation of said architecture)
Misc:
* Tighten up our boot protocol for systems with memory above
52 bits physical
* Const-ify static keys to satisty jump label asm constraints
* Trivial FFA driver cleanups in preparation for v1.1 support
* Export the kernel_neon_* APIs as GPL symbols
* Harden our instruction generation routines against
instrumentation
* A bunch of robustness improvements to our arch-specific selftests
* Minor cleanups and fixes all over (kbuild, kprobes, kfence, PMU, ...)
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmOPLFAQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNPRcCACLyDTvkimiqfoPxzzgdkx/6QOvw9s3/mXg
UcTORSZBR1VnYkiMYEKVz/tTfG99dnWtD8/0k/rz48NbhBfsF2sN4ukyBBXVf0zR
fjnaVyVC11LUgBgZKPo6maV+jf/JWf9hJtpPl06KTiPb2Hw2JX4DXg+PeF8t2hGx
NLH4ekQOrlDM8mlsN5mc0YsHbiuO7Xe/NRuet8TsgU4bEvLAwO6bzOLVUMqDQZNq
bQe2ENcGVAzAf7iRJb38lj9qB/5hrQTHRXqLXMSnJyyVjQEwYca0PeJMa7x30bXF
ZZ+xQ8Wq0mxiffZraf6SE34yD4gaYS4Fziw7rqvydC15vYhzJBH1
=hV+2
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The highlights this time are support for dynamically enabling and
disabling Clang's Shadow Call Stack at boot and a long-awaited
optimisation to the way in which we handle the SVE register state on
system call entry to avoid taking unnecessary traps from userspace.
Summary:
ACPI:
- Enable FPDT support for boot-time profiling
- Fix CPU PMU probing to work better with PREEMPT_RT
- Update SMMUv3 MSI DeviceID parsing to latest IORT spec
- APMT support for probing Arm CoreSight PMU devices
CPU features:
- Advertise new SVE instructions (v2.1)
- Advertise range prefetch instruction
- Advertise CSSC ("Common Short Sequence Compression") scalar
instructions, adding things like min, max, abs, popcount
- Enable DIT (Data Independent Timing) when running in the kernel
- More conversion of system register fields over to the generated
header
CPU misfeatures:
- Workaround for Cortex-A715 erratum #2645198
Dynamic SCS:
- Support for dynamic shadow call stacks to allow switching at
runtime between Clang's SCS implementation and the CPU's pointer
authentication feature when it is supported (complete with scary
DWARF parser!)
Tracing and debug:
- Remove static ftrace in favour of, err, dynamic ftrace!
- Seperate 'struct ftrace_regs' from 'struct pt_regs' in core ftrace
and existing arch code
- Introduce and implement FTRACE_WITH_ARGS on arm64 to replace the
old FTRACE_WITH_REGS
- Extend 'crashkernel=' parameter with default value and fallback to
placement above 4G physical if initial (low) allocation fails
SVE:
- Optimisation to avoid disabling SVE unconditionally on syscall
entry and just zeroing the non-shared state on return instead
Exceptions:
- Rework of undefined instruction handling to avoid serialisation on
global lock (this includes emulation of user accesses to the ID
registers)
Perf and PMU:
- Support for TLP filters in Hisilicon's PCIe PMU device
- Support for the DDR PMU present in Amlogic Meson G12 SoCs
- Support for the terribly-named "CoreSight PMU" architecture from
Arm (and Nvidia's implementation of said architecture)
Misc:
- Tighten up our boot protocol for systems with memory above 52 bits
physical
- Const-ify static keys to satisty jump label asm constraints
- Trivial FFA driver cleanups in preparation for v1.1 support
- Export the kernel_neon_* APIs as GPL symbols
- Harden our instruction generation routines against instrumentation
- A bunch of robustness improvements to our arch-specific selftests
- Minor cleanups and fixes all over (kbuild, kprobes, kfence, PMU, ...)"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (151 commits)
arm64: kprobes: Return DBG_HOOK_ERROR if kprobes can not handle a BRK
arm64: kprobes: Let arch do_page_fault() fix up page fault in user handler
arm64: Prohibit instrumentation on arch_stack_walk()
arm64:uprobe fix the uprobe SWBP_INSN in big-endian
arm64: alternatives: add __init/__initconst to some functions/variables
arm_pmu: Drop redundant armpmu->map_event() in armpmu_event_init()
kselftest/arm64: Allow epoll_wait() to return more than one result
kselftest/arm64: Don't drain output while spawning children
kselftest/arm64: Hold fp-stress children until they're all spawned
arm64/sysreg: Remove duplicate definitions from asm/sysreg.h
arm64/sysreg: Convert ID_DFR1_EL1 to automatic generation
arm64/sysreg: Convert ID_DFR0_EL1 to automatic generation
arm64/sysreg: Convert ID_AFR0_EL1 to automatic generation
arm64/sysreg: Convert ID_MMFR5_EL1 to automatic generation
arm64/sysreg: Convert MVFR2_EL1 to automatic generation
arm64/sysreg: Convert MVFR1_EL1 to automatic generation
arm64/sysreg: Convert MVFR0_EL1 to automatic generation
arm64/sysreg: Convert ID_PFR2_EL1 to automatic generation
arm64/sysreg: Convert ID_PFR1_EL1 to automatic generation
arm64/sysreg: Convert ID_PFR0_EL1 to automatic generation
...
|
||
|
Rafael J. Wysocki
|
bee74dcbd3 |
Merge branches 'acpi-fan', 'acpi-pcc', 'acpi-misc' and 'pnp'
Merge ACPI fan driver fixes, ACPI PCC driver fixes, miscellaneous ACPI cleanups and PNP updates for 6.2-rc1: - Make the ACPI fan driver use sysfs_emit_at() in its sysfs interface code (ye xingchen). - Fix the _FIF package extraction failure handling in the ACPI fan driver (Hanjun Guo). - Fix the PCC mailbox handling error code path (Huisong Li). - Avoid using PCC Opregions if there is no platform interrupt allocated for this purpose (Huisong Li). - Use sysfs_emit() instead of scnprintf() in the ACPI PAD driver and CPPC library (ye xingchen). - Fix some kernel-doc issues in the ACPI GSI processing code (Xiongfeng Wang). - Fix name memory leak in pnp_alloc_dev() (Yang Yingliang). - Do not disable PNP devices on suspend when they cannot be re-enabled on resume (Hans de Goede). * acpi-fan: ACPI: fan: Convert to use sysfs_emit_at() API ACPI: fan: Bail out if extract package failed * acpi-pcc: mailbox: pcc: Reset pcc_chan_count to zero in case of PCC probe failure ACPI: PCC: Setup PCC Opregion handler only if platform interrupt is available * acpi-misc: ACPI: use sysfs_emit() instead of scnprintf() ACPI: irq: Fix some kernel-doc issues * pnp: PNP: Do not disable devices on suspend when they cannot be re-enabled on resume PNP: fix name memory leak in pnp_alloc_dev() |
||
|
Rafael J. Wysocki
|
39f26d1012 |
Merge branches 'acpi-apei', 'acpi-x86', 'acpi-battery' and 'acpi-pfrut'
Make ACPI APEI updates, x86-specific ACPI updates, ACPI battery driver fix and ACPI PFRU/T driver fixes for 6.2-rc1: - Drop unsetting ACPI APEI driver data on remove (Uwe Kleine-König). - Use xchg_release() instead of cmpxchg() for updating new GHES cache slots (Ard Biesheuvel). - Clean up the ACPI APEI code (Sudeep Holla, Christophe JAILLET, Jay Lu). - Add new I2C device enumeration quirks for Medion Lifetab S10346 and Lenovo Yoga Tab 3 Pro (YT3-X90F) (Hans de Goede). - Make the ACPI battery driver notify user space about adding new battery hooks and removing the existing ones (Armin Wolf). - Modify the pfr_update and pfr_telemetry drivers to use ACPI_FREE() for freeing acpi_object structures to help diagnostics (Wang ShaoBo). * acpi-apei: ACPI: APEI: EINJ: Refactor available_error_type_show() ACPI: APEI: EINJ: Fix formatting errors ACPI: APEI: Remove a useless include ACPI: APEI: Silence missing prototype warnings apei/ghes: Use xchg_release() for updating new cache slot instead of cmpxchg() ACPI: APEI: Drop unsetting driver data on remove * acpi-x86: ACPI: x86: Add skip i2c clients quirk for Medion Lifetab S10346 ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Tab 3 Pro (YT3-X90F) * acpi-battery: ACPI: battery: Call power_supply_changed() when adding hooks * acpi-pfrut: ACPI: pfr_update: use ACPI_FREE() to free acpi_object ACPI: pfr_telemetry: use ACPI_FREE() to free acpi_object |
||
|
Rafael J. Wysocki
|
6f1581810b |
Merge branches 'acpi-pm', 'acpi-processor', 'acpi-ec' and 'acpi-video'
Make ACPI power management changes, ACPI processor driver updates, ACPI EC driver quirk and ACPI backlight driver updates for 6.2-rc1: - Print full name paths of ACPI power resources objects during enumeration (Kane Chen). - Eliminate a compiler warning regarding a missing function prototype in the ACPI power management code (Sudeep Holla). - Fix and clean up the ACPI processor driver (Rafael Wysocki, Li Zhong, Colin Ian King, Sudeep Holla). - Add quirk for the HP Pavilion Gaming 15-cx0041ur to the ACPI EC driver (Mia Kanashi). - Add some mew ACPI backlight handling quirks and update some existing ones (Hans de Goede). - Make the ACPI backlight driver prefer the native backlight control over vendor backlight control when possible (Hans de Goede). * acpi-pm: ACPI: PM: Silence missing prototype warning ACPI: PM: Print full name path while adding power resource * acpi-processor: ACPI: processor: perflib: Adjust acpi_processor_notify_smm() return value ACPI: processor: perflib: Rearrange acpi_processor_notify_smm() ACPI: processor: perflib: Rearrange unregistration routine ACPI: processor: perflib: Drop redundant parentheses ACPI: processor: perflib: Adjust white space ACPI: processor: idle: Drop unnecessary statements and parens ACPI: processor: Silence missing prototype warnings ACPI: processor_idle: Silence missing prototype warnings ACPI: processor: throttling: remove variable count ACPI: processor: idle: Check acpi_fetch_acpi_dev() return value * acpi-ec: ACPI: EC: Add quirk for the HP Pavilion Gaming 15-cx0041ur * acpi-video: ACPI: video: Prefer native over vendor ACPI: video: Simplify __acpi_video_get_backlight_type() ACPI: video: Add force_native quirk for Sony Vaio VPCY11S1E ACPI: video: Add force_vendor quirk for Sony Vaio PCG-FRV35 ACPI: video: Change Sony Vaio VPCEH3U1E quirk to force_native ACPI: video: Change GIGABYTE GB-BXBT-2807 quirk to force_none ACPI: video: Add a few bugtracker links to DMI quirks |
||
|
Rafael J. Wysocki
|
45494d77f2 |
Merge branches 'acpi-scan', 'acpi-bus', 'acpi-tables' and 'acpi-sysfs'
Merge ACPI changes related to device enumeration, device object managenet, operation region handling, table parsing and sysfs interface: - Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device enumeration code (Giulio Benetti). - Change the return type of the ACPI driver remove callback to void and update its users accordingly (Dawei Li). - Add general support for FFH address space type and implement the low- level part of it for ARM64 (Sudeep Holla). - Fix stale comments in the ACPI tables parsing code and make it print more messages related to MADT (Hanjun Guo, Huacai Chen). - Replace invocations of generic library functions with more kernel- specific counterparts in the ACPI sysfs interface (Christophe JAILLET, Xu Panda). * acpi-scan: ACPI: scan: substitute empty_zero_page with helper ZERO_PAGE(0) * acpi-bus: ACPI: FFH: Silence missing prototype warnings ACPI: make remove callback of ACPI driver void ACPI: bus: Fix the _OSC capability check for FFH OpRegion arm64: Add architecture specific ACPI FFH Opregion callbacks ACPI: Implement a generic FFH Opregion handler * acpi-tables: ACPI: tables: Fix the stale comments for acpi_locate_initial_tables() ACPI: tables: Print CORE_PIC information when MADT is parsed * acpi-sysfs: ACPI: sysfs: use sysfs_emit() to instead of scnprintf() ACPI: sysfs: Use kstrtobool() instead of strtobool() |
||
|
Rafael J. Wysocki
|
888bc86e7c |
Merge branch 'acpica'
Merge ACPICA changes, including bug fixes and cleanups as well as support for some recently defined data structures, for 6.2-rc1: - Make acpi_ex_load_op() match upstream implementation (Rafael Wysocki). - Add support for loong_arch-specific APICs in MADT (Huacai Chen). - Add support for fixed PCIe wake event (Huacai Chen). - Add EBDA pointer sanity checks (Vit Kabele). - Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele). - Add CCEL table support to both compiler/disassembler (Kuppuswamy Sathyanarayanan). - Add a couple of new UUIDs to the known UUID list (Bob Moore). - Add support for FFH Opregion special context data (Sudeep Holla). - Improve warning message for "invalid ACPI name" (Bob Moore). - Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT table (Alison Schofield). - Prepare IORT support for revision E.e (Robin Murphy). - Finish support for the CDAT table (Bob Moore). - Fix error code path in acpi_ds_call_control_method() (Rafael Wysocki). - Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li Zetao). - Update the version of the ACPICA code in the kernel (Bob Moore). * acpica: ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() ACPICA: Fix error code path in acpi_ds_call_control_method() ACPICA: Update version to 20221020 ACPICA: Add utcksum.o to the acpidump Makefile Revert "LoongArch: Provisionally add ACPICA data structures" ACPICA: Finish support for the CDAT table ACPICA: IORT: Update for revision E.e ACPICA: Add CXL 3.0 structures (CXIMS & RDPAS) to the CEDT table ACPICA: Improve warning message for "invalid ACPI name" ACPICA: Add support for FFH Opregion special context data ACPICA: Add a couple of new UUIDs to the known UUID list ACPICA: iASL: Add CCEL table to both compiler/disassembler ACPICA: Do not touch VGA memory when EBDA < 1ki_b ACPICA: Check that EBDA pointer is in valid memory ACPICA: Events: Support fixed PCIe wake event ACPICA: MADT: Add loong_arch-specific APICs support ACPICA: Make acpi_ex_load_op() match upstream |
||
|
Hans de Goede
|
ab4620f58d |
ACPI: EC: Fix ECDT probe ordering issues
ACPI-2.0 says that the EC OpRegion handler must be available immediately (like the standard default OpRegion handlers): Quoting from the ACPI spec version 6.3: "6.5.4 _REG (Region) ... 2. OSPM must make Embedded Controller operation regions, accessed via the Embedded Controllers described in ECDT, available before executing any control method. These operation regions may become inaccessible after OSPM runs _REG(EmbeddedControl, 0)." So acpi_bus_init() calls acpi_ec_ecdt_probe(), which calls acpi_install_address_space_handler() to install the EC's OpRegion handler, early on. This not only installs the OpRegion handler, but also calls the EC's _REG method. The _REG method call is a problem because it may rely on initialization done by the _INI methods of one of the PCI / _SB root devs, see for example: https://bugzilla.kernel.org/show_bug.cgi?id=214899 . Generally speaking _REG methods are executed when the ACPI-device they are part of has a driver bound to it. Where as _INI methods must be executed at table load time (according to the spec). The problem here is that the early acpi_install_address_space_handler() call causes the _REG handler to run too early. To allow fixing this the ACPICA code now allows to split the OpRegion handler installation and the executing of _REG into 2 separate steps. This commit uses this ACPICA functionality to fix the EC probe ordering by delaying the executing of _REG for ECDT described ECs till the matching EC device in the DSDT gets parsed and acpi_ec_add() for it gets called. This moves the calling of _REG for the EC on devices with an ECDT to the same point in time where it is called on devices without an ECDT table. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214899 Reported-and-tested-by: Johannes Penßel <johannespenssel@posteo.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Hans de Goede
|
a5072078db |
ACPI: EC: Fix EC address space handler unregistration
When an ECDT table is present the EC address space handler gets registered on the root node. So to unregister it properly the unregister call also must be done on the root node. Store the ACPI handle used for the acpi_install_address_space_handler() call and use te same handle for the acpi_remove_address_space_handler() call. Reported-by: Rafael J. Wysocki <rafael@kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Rafael J. Wysocki
|
0634033dd1 | Merge back ACPI EC changes for 6.2-rc1 | ||
|
Hans de Goede
|
54c516aeb8 |
ACPICA: Allow address_space_handler Install and _REG execution as 2 separate steps
ACPI-2.0 says that the EC op_region handler must be available immediately (like the standard default op_region handlers): Quoting from the ACPI spec version 6.3: "6.5.4 _REG (Region) ... 2. OSPM must make Embedded Controller operation regions, accessed via the Embedded Controllers described in ECDT, available before executing any control method. These operation regions may become inaccessible after OSPM runs _REG(EmbeddedControl, 0)." So the OS must probe the ECDT described EC and install the OpRegion handler before calling acpi_enable_subsystem() and acpi_initialize_objects(). This is a problem because calling acpi_install_address_space_handler() does not just install the op_region handler, it also runs the EC's _REG method. This _REG method may rely on initialization done by the _INI methods of one of the PCI / _SB root devices. For the other early/default op_region handlers the op_region handler install and the _REG execution is split into 2 separate steps: 1. acpi_ev_install_region_handlers(), called early from acpi_load_tables() 2. acpi_ev_initialize_op_regions(), called from acpi_initialize_objects() To fix the EC op_region issue, add 2 bew functions: 1. acpi_install_address_space_handler_no_reg() 2. acpi_execute_reg_methods() to allow doing things in 2 steps for other op_region handlers, like the EC handler, too. Note that the comment describing acpi_ev_install_region_handlers() even has an alinea describing this problem. Using the new methods allows users to avoid this problem. Link: https://github.com/acpica/acpica/pull/786 Link: https://bugzilla.kernel.org/show_bug.cgi?id=214899 Reported-and-tested-by: Johannes Penßel <johannespenssel@posteo.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Amadeusz Sławiński
|
7dfb216eda |
ACPICA: Fix operand resolution
In our tests we get UBSAN warning coming from ACPI parser. This is caused by trying to resolve operands when there is none. [ 0.000000] Linux version 5.15.0-rc3chromeavsrel1.0.184+ (root@...) (gcc (Ubuntu 10.3.0-1ubuntu1~20.04) 10.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1 SMP PREEMPT Sat Oct 16 00:08:27 UTC 2021 ... [ 14.719508] ================================================================================ [ 14.719551] UBSAN: array-index-out-of-bounds in /.../linux/drivers/acpi/acpica/dswexec.c:401:12 [ 14.719594] index -1 is out of range for type 'acpi_operand_object *[9]' [ 14.719621] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.0-rc3chromeavsrel1.0.184+ #1 [ 14.719657] Hardware name: Intel Corp. Geminilake/GLK RVP2 LP4SD (07), BIOS GELKRVPA.X64.0214.B50.2009111159 09/11/2020 [ 14.719694] Call Trace: [ 14.719712] dump_stack_lvl+0x38/0x49 [ 14.719749] dump_stack+0x10/0x12 [ 14.719775] ubsan_epilogue+0x9/0x45 [ 14.719801] __ubsan_handle_out_of_bounds.cold+0x44/0x49 [ 14.719835] acpi_ds_exec_end_op+0x1d7/0x6b5 [ 14.719870] acpi_ps_parse_loop+0x942/0xb34 ... Problem happens because WalkState->NumOperands is 0 and it is used when trying to access into operands table. Actual code is: WalkState->Operands [WalkState->NumOperands -1] which causes out of bound access. Improve the check before above access to check if ACPI opcode should have any arguments (operands) at all. Link: https://github.com/acpica/acpica/pull/745 Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Rafael J. Wysocki
|
fa4e1f8804 | Merge back ACPICA changes for 6.2-rc1 | ||
|
Hans de Goede
|
ecc6aaabce |
ACPI: x86: Add skip i2c clients quirk for Medion Lifetab S10346
The Medion Lifetab S10346 is a x86 tablet which ships with Android x86 as factory OS. The Android x86 kernel fork ignores I2C devices described in the DSDT, except for the PMIC and Audio codecs. As usual the Medion Lifetab S10346's DSDT contains a bunch of extra I2C devices which are not actually there, causing various resource conflicts. Add an ACPI_QUIRK_SKIP_I2C_CLIENTS quirk for the Medion Lifetab S10346 to the acpi_quirk_skip_dmi_ids table to woraround this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Jay Lu
|
87386ee83d |
ACPI: APEI: EINJ: Refactor available_error_type_show()
Move error type descriptions into an array and loop over error types to improve readability and maintainability. Replace seq_printf() with seq_puts() as recommended by checkpatch.pl. Signed-off-by: Jay Lu <jaylu102@amd.com> Co-developed-by: Ben Cheatham <benjamin.cheatham@amd.com> Signed-off-by: Ben Cheatham <benjamin.cheatham@amd.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Jay Lu
|
37ea969386 |
ACPI: APEI: EINJ: Fix formatting errors
Checkpatch reveals warnings and an error due to missing lines and incorrect indentations. Add the missing lines after declarations and fix the suspect indentations. Signed-off-by: Jay Lu <jaylu102@amd.com> Signed-off-by: Ben Cheatham <benjamin.cheatham@amd.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Rafael J. Wysocki
|
f1a70bac90 |
ACPI: processor: perflib: Adjust acpi_processor_notify_smm() return value
Avoid returning a confusing error code from acpi_processor_notify_smm() if it is called for the second time in the case when SMM notification regarding P-state control is not supported. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Rafael J. Wysocki
|
be5c8a046c |
ACPI: processor: perflib: Rearrange acpi_processor_notify_smm()
Rearrange the code in acpi_processor_notify_smm() to consolidate error handling in it and improve the comments in there while at it. No expected functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Rafael J. Wysocki
|
5be583c695 |
ACPI: processor: perflib: Rearrange unregistration routine
Rearrange acpi_processor_unregister_performance() to follow a more common error handling pattern and drop a redundant "return" statement from the end of it. No expected functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Rafael J. Wysocki
|
d8f4ed0728 |
ACPI: processor: perflib: Drop redundant parentheses
Drop some redundant parentheses and rearrange some checks using them in the ACPI processor performance library code for better code clarity. No expected functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Rafael J. Wysocki
|
3d9e9a96ca |
ACPI: processor: perflib: Adjust white space
Some inconsistent usage of white space in the ACPI processor performance library code causes that code to be somewhat harder to read that it would have been otherwise, so adjust the white space in there to address that. No expected functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Rafael J. Wysocki
|
b697b812d4 |
ACPI: processor: idle: Drop unnecessary statements and parens
Drop a redundant "else", a "return" statement at the end of a void function and redundant parentheses around an unsigent int variable name from the ACPI processor idle driver. No expected functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Rafael J. Wysocki
|
57336224da |
ACPI: thermal: Adjust critical.flags.valid check
It is not necessary to compare critical.flags.valid to 1 in acpi_thermal_trips_update() and doing so is also inconsistent with other similar checks in that code, so simply check if the flag is not 0 instead. No expected functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Thomas Gleixner
|
6132a490f9 |
irqchip updates for 6.2
- More APCI fixes and improvements for the LoongArch architecture, adding support for the HTVEC irqchip, suspend-resume, and some PCI INTx workarounds - Initial DT support for LoongArch. I'm not even kidding. - Support for the MTK CIRQv2, a minor deviation from the original version - Error handling fixes for wpcm450, GIC... - BE detection for a FSL controller - Declare the Sifive PLIC as wake-up agnostic - Simplify fishing out the device data for the ST irqchip - Mark some data structures as __initconst in the apple-aic driver - Switch over from strtobool to kstrtobool - COMPILE_TEST fixes -----BEGIN PGP SIGNATURE----- iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAmOQsZ8PHG1hekBrZXJu ZWwub3JnAAoJECPQ0LrRPXpDQMwQAJWBLgkSHnPSJizG+KLpDSljRmkUif7j3PBk TVCwfj/xXiCUzP7PBhq2DUZWLvrKIiYl79Z6j/Jz4xlavPAVp6Cs+afxmJF2n/wy OwWF8uevHvFhKIFJUFxrSDaODWGI6afmDT7iflE3/Uz2ahVYoLkz5a10ji78N3JU peeX81i/kZE19w1aCs0sdMgzJufjK98hj55917GGv/IRBAjj2qi2tOZnPdQuE6d4 +vDiRtKDjDZYp9toaaH7DGBlBMG/yQzBhPaXtMnxH9wGK5858sYmHZroeM4FFbPR sJ/rCiaBEuvC6F1JkShKsRqT2DW1BgXYjSPxh+qhzwCOSG32DDjkj6LqVkygSoKQ MogCIkC3C4D0BIiokSdJByN1PWjoynwtYJrUkYPk4fMg7JxHYwee9dCptT81irMM +3L1mqx9CAll7YkzPVwrCbFyJF9K4ax9kjEvSH3E8xZxLKGnS9iqjQBfE9NKILCl tT6dmCJXTXsoGFjK4zz4o2N8i8aOeUz/B3GX5eYD+x0s0riXhg4kYIWFVXsxwJlX VSxBphr5fAQrdgBdOOESmiqNxPv9HuLRyR2mZ4blE4ylDa9NRUd+4UTy8x0bRmxD BO7qPof0CnrplBNEQi7kDtc91q4UxQoOV/G8LoFp454d9imMlAuPMbizTAULpWZu JxPXyrJl =fhi8 -----END PGP SIGNATURE----- Merge tag 'irqchip-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates frim Marc Zyngier: - More APCI fixes and improvements for the LoongArch architecture, adding support for the HTVEC irqchip, suspend-resume, and some PCI INTx workarounds - Initial DT support for LoongArch. I'm not even kidding. - Support for the MTK CIRQv2, a minor deviation from the original version - Error handling fixes for wpcm450, GIC... - BE detection for a FSL controller - Declare the Sifive PLIC as wake-up agnostic - Simplify fishing out the device data for the ST irqchip - Mark some data structures as __initconst in the apple-aic driver - Switch over from strtobool to kstrtobool - COMPILE_TEST fixes |
||
|
ye xingchen
|
64ee252826 |
ACPI: fan: Convert to use sysfs_emit_at() API
Follow the advice of the Documentation/filesystems/sysfs.rst and show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Dan Williams
|
02fedf1466 |
Merge branch 'for-6.2/cxl-xor' into for-6.2/cxl
Pick up support for "XOR" interleave math when parsing ACPI CFMWS window structures. Fix up conflicts with the RCH emulation already pending in cxl/next. |
||
|
Dan Williams
|
95dddcb5e8 |
Merge branch 'for-6.2/cxl-security' into for-6.2/cxl
Pick CXL PMEM security commands for v6.2. Resolve conflicts with the removal of the cxl_pmem_wq. |
||
|
Terry Bowman
|
da8380bbbe |
cxl/acpi: Set ACPI's CXL _OSC to indicate RCD mode support
ACPI uses the CXL _OSC support method to communicate the available CXL functionality to FW. The CXL _OSC support method includes a field to indicate the OS is capable of RCD mode. FW can potentially change it's operation depending on the _OSC support method reported by the OS. The ACPI driver currently only sets the ACPI _OSC support method to indicate CXL VH mode. Change the capability reported to also include CXL RCD mode. [1] CXL3.0 Table 9-26 'Interpretation of CXL _OSC Support Field' Signed-off-by: Terry Bowman <terry.bowman@amd.com> [rrichter@amd.com: Reworded patch description.] Signed-off-by: Robert Richter <rrichter@amd.com> Link: http://lore.kernel.org/r/Y4cRV/Sj0epVW7bE@rric.localdomain Link: https://lore.kernel.org/r/166993046717.1882361.10587956243041624761.stgit@dwillia2-xfh.jf.intel.com Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
|
Dan Williams
|
7db0aa8cc0 |
Merge "ACPICA: Add CXL 3.0 structures..." into for-6.2/cxl-xor
Pick up:
|
||
|
Dan Williams
|
dc370b28c8 |
nvdimm/region: Move cache management to the region driver
Now that cpu_cache_invalidate_memregion() is generically available, use it to centralize CPU cache management in the nvdimm region driver. This trades off removing redundant per-dimm CPU cache flushing with an opportunistic flush on every region disable event to cover the case of sensitive dirty data in the cache being written back to media after a secure erase / overwrite event. Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/166993221550.1995348.16843505129579060258.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
|
Li Zetao
|
470188b09e |
ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage()
There is an use-after-free reported by KASAN:
BUG: KASAN: use-after-free in acpi_ut_remove_reference+0x3b/0x82
Read of size 1 at addr ffff888112afc460 by task modprobe/2111
CPU: 0 PID: 2111 Comm: modprobe Not tainted 6.1.0-rc7-dirty
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
Call Trace:
<TASK>
kasan_report+0xae/0xe0
acpi_ut_remove_reference+0x3b/0x82
acpi_ut_copy_iobject_to_iobject+0x3be/0x3d5
acpi_ds_store_object_to_local+0x15d/0x3a0
acpi_ex_store+0x78d/0x7fd
acpi_ex_opcode_1A_1T_1R+0xbe4/0xf9b
acpi_ps_parse_aml+0x217/0x8d5
...
</TASK>
The root cause of the problem is that the acpi_operand_object
is freed when acpi_ut_walk_package_tree() fails in
acpi_ut_copy_ipackage_to_ipackage(), lead to repeated release in
acpi_ut_copy_iobject_to_iobject(). The problem was introduced
by "8aa5e56eeb61" commit, this commit is to fix memory leak in
acpi_ut_copy_iobject_to_iobject(), repeatedly adding remove
operation, lead to "acpi_operand_object" used after free.
Fix it by removing acpi_ut_remove_reference() in
acpi_ut_copy_ipackage_to_ipackage(). acpi_ut_copy_ipackage_to_ipackage()
is called to copy an internal package object into another internal
package object, when it fails, the memory of acpi_operand_object
should be freed by the caller.
Fixes:
|
||
|
Armin Wolf
|
98b0cf207b |
ACPI: battery: Call power_supply_changed() when adding hooks
If a battery hook is added to a battery, userspace software is not informed that the available properties of the battery might have changed. This for example causes upower to react slowly if a new battery hook is added during runtime. Fix this by calling power_supply_changed() if a battery hook was successfully added/removed. Tested on a Dell Inspiron 3505. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
ye xingchen
|
92266c65e0 |
ACPI: use sysfs_emit() instead of scnprintf()
Replace the open-code with sysfs_emit() to simplify the code. Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Hans de Goede
|
fe820db352 |
ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Tab 3 Pro (YT3-X90F)
The Lenovo Yoga Tab 3 Pro (YT3-X90F) is a x86 (Cherry Trail) tablet which ships with Android x86 as factory OS. The Android x86 kernel fork ignores I2C devices described in the DSDT, except for the PMIC and Audio codecs. As usual the Lenovo Yoga Tab 3 Pro's DSDT contains a bunch of extra I2C devices which are not actually there, causing various resource conflicts. Add an ACPI_QUIRK_SKIP_I2C_CLIENTS quirk for the Lenovo Yoga Tab 3 Pro to the acpi_quirk_skip_dmi_ids table to woraround this. ACPI_QUIRK_SKIP_I2C_CLIENTS handling uses i2c_acpi_known_good_ids[], so that PMICs and Audio codecs will still be enumerated properly. The Lenovo Yoga Tab 3 Pro uses a Whiskey Cove PMIC, add the INT34D3 HID for this PMIC to the i2c_acpi_known_good_ids[] list. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Christophe JAILLET
|
89da5c476d |
ACPI: APEI: Remove a useless include
This file does not use rcu, so there is no point in including <linux/rculist.h>. So just remove it. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Jianmin Lv
|
d0c50cc4b9 |
ACPI / PCI: fix LPIC IRQ model default PCI IRQ polarity
On LoongArch based systems, the PCI devices (e.g. SATA controllers and PCI-to-PCI bridge controllers) in Loongson chipsets output high-level interrupt signal to the interrupt controller they are connected (see Loongson 7A1000 Bridge User Manual v2.00, sec 5.3, "For the bridge chip, AC97 DMA interrupts are edge triggered, gpio interrupts can be configured to be level triggered or edge triggered as needed, and the rest of the interrupts are level triggered and active high."), while the IRQs are active low from the perspective of PCI (see Conventional PCI spec r3.0, sec 2.2.6, "Interrupts on PCI are optional and defined as level sensitive, asserted low."), which means that the interrupt output of PCI devices plugged into PCI-to-PCI bridges of Loongson chipset will be also converted to high-level. So high level triggered type is required to be passed to acpi_register_gsi() when creating mappings for PCI devices. Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Reviewed-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221022075955.11726-2-lvjianmin@loongson.cn |
||
|
Al Viro
|
de4eda9de2 |
use less confusing names for iov_iter direction initializers
READ/WRITE proved to be actively confusing - the meanings are "data destination, as used with read(2)" and "data source, as used with write(2)", but people keep interpreting those as "we read data from it" and "we write data to it", i.e. exactly the wrong way. Call them ITER_DEST and ITER_SOURCE - at least that is harder to misinterpret... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
||
|
Sudeep Holla
|
e78963f5c5 |
ACPI: APEI: Silence missing prototype warnings
Silence the following warnings when make W=1: | CC drivers/acpi/apei/apei-base.c | warning: no previous prototype for 'arch_apei_enable_cmcff' [-Wmissing-prototypes] | int __weak arch_apei_enable_cmcff(struct acpi_hest_header *hest_hdr, | ^ | CC drivers/acpi/apei/apei-base.c | warning: no previous prototype for 'arch_apei_report_mem_error' [-Wmissing-prototypes] | void __weak arch_apei_report_mem_error(int sev, | ^ Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Hanjun Guo
|
f2ae44ae53 |
ACPI: fan: Bail out if extract package failed
Bail out if we extract the _FIF package failed, or we will end
of referencing the garbage information in fields[], the fan control
will be in mess, fix it.
Fiexes:
|
||
|
Wang ShaoBo
|
e335beed78 |
ACPI: pfr_update: use ACPI_FREE() to free acpi_object
acpi_evaluate_dsm_typed()/acpi_evaluate_dsm() should be coupled with
ACPI_FREE() to free the ACPI memory, because we need to track the
allocation of acpi_object when ACPI_DBG_TRACK_ALLOCATIONS enabled,
so use ACPI_FREE() instead of kfree().
Fixes:
|
||
|
Wang ShaoBo
|
0f2aa7fc2a |
ACPI: pfr_telemetry: use ACPI_FREE() to free acpi_object
acpi_evaluate_dsm_typed()/acpi_evaluate_dsm() should be coupled
with ACPI_FREE() to free the ACPI memory, because we need to
track the allocation of acpi_object when ACPI_DBG_TRACK_ALLOCATIONS
enabled, so use ACPI_FREE() instead of kfree().
Fixes:
|