Commit graph

49 commits

Author SHA1 Message Date
Ryusuke Konishi
fee5eaecca nilfs2: fix possible out-of-bounds segment allocation in resize ioctl
Syzbot reports that in its stress test for resize ioctl, the log writing
function nilfs_segctor_do_construct hits a WARN_ON in
nilfs_segctor_truncate_segments().

It turned out that there is a problem with the current implementation of
the resize ioctl, which changes the writable range on the device (the
range of allocatable segments) at the end of the resize process.

This order is necessary for file system expansion to avoid corrupting the
superblock at trailing edge.  However, in the case of a file system
shrink, if log writes occur after truncating out-of-bounds trailing
segments and before the resize is complete, segments may be allocated from
the truncated space.

The userspace resize tool was fine as it limits the range of allocatable
segments before performing the resize, but it can run into this issue if
the resize ioctl is called alone.

Fix this issue by changing nilfs_sufile_resize() to update the range of
allocatable segments immediately after successful truncation of segment
space in case of file system shrink.

Link: https://lkml.kernel.org/r/20230524094348.3784-1-konishi.ryusuke@gmail.com
Fixes: 4e33f9eab0 ("nilfs2: implement resize ioctl")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+33494cd0df2ec2931851@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/0000000000005434c405fbbafdc5@google.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 11:31:51 -07:00
Chen Zhongjin
512c5ca01a nilfs2: fix nilfs_sufile_mark_dirty() not set segment usage as dirty
When extending segments, nilfs_sufile_alloc() is called to get an
unassigned segment, then mark it as dirty to avoid accidentally allocating
the same segment in the future.

But for some special cases such as a corrupted image it can be unreliable.
If such corruption of the dirty state of the segment occurs, nilfs2 may
reallocate a segment that is in use and pick the same segment for writing
twice at the same time.

This will cause the problem reported by syzkaller:
https://syzkaller.appspot.com/bug?id=c7c4748e11ffcc367cef04f76e02e931833cbd24

This case started with segbuf1.segnum = 3, nextnum = 4 when constructed. 
It supposed segment 4 has already been allocated and marked as dirty.

However the dirty state was corrupted and segment 4 usage was not dirty. 
For the first time nilfs_segctor_extend_segments() segment 4 was allocated
again, which made segbuf2 and next segbuf3 had same segment 4.

sb_getblk() will get same bh for segbuf2 and segbuf3, and this bh is added
to both buffer lists of two segbuf.  It makes the lists broken which
causes NULL pointer dereference.

Fix the problem by setting usage as dirty every time in
nilfs_sufile_mark_dirty(), which is called during constructing current
segment to be written out and before allocating next segment.

[chenzhongjin@huawei.com: add lock protection per Ryusuke]
  Link: https://lkml.kernel.org/r/20221121091141.214703-1-chenzhongjin@huawei.com
Link: https://lkml.kernel.org/r/20221118063304.140187-1-chenzhongjin@huawei.com
Fixes: 9ff05123e3 ("nilfs2: segment constructor")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reported-by: <syzbot+77e4f0...@syzkaller.appspotmail.com>
Reported-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-22 18:50:45 -08:00
Christoph Hellwig
44abff2c0b block: decouple REQ_OP_SECURE_ERASE from REQ_OP_DISCARD
Secure erase is a very different operation from discard in that it is
a data integrity operation vs hint.  Fully split the limits and helper
infrastructure to make the separation more clear.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> [nifs2]
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> [f2fs]
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Acked-by: Chao Yu <chao@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-27-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-17 19:49:59 -06:00
Ryusuke Konishi
94ee1d9151 nilfs2: remove filenames from file comments
Remove filenames that are not particularly useful in file comments, and
suppress checkpatch warnings

  WARNING: It's generally not useful to have the filename in the file

Link: https://lkml.kernel.org/r/1635151862-11547-3-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Qing Wang <wangqing@vivo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-09 10:02:52 -08:00
Wang Hai
64ead5201e nilfs2: fix some kernel-doc warnings for nilfs2
Fixes the following W=1 kernel build warning(s):

fs/nilfs2/bmap.c:378: warning: Excess function parameter 'bhp' description in 'nilfs_bmap_assign'
fs/nilfs2/cpfile.c:907: warning: Excess function parameter 'status' description in 'nilfs_cpfile_change_cpmode'
fs/nilfs2/cpfile.c:946: warning: Excess function parameter 'stat' description in 'nilfs_cpfile_get_stat'
fs/nilfs2/page.c:76: warning: Excess function parameter 'inode' description in 'nilfs_forget_buffer'
fs/nilfs2/sufile.c:563: warning: Excess function parameter 'stat' description in 'nilfs_sufile_get_stat'

Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/1601386269-2423-1-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-16 11:11:22 -07:00
Joe Perches
a1d0747a39 nilfs2: use a more common logging style
Add macros for nilfs_<level>(sb, fmt, ...) and convert the uses of
'nilfs_msg(sb, KERN_<LEVEL>, ...)' to 'nilfs_<level>(sb, ...)' so nilfs2
uses a logging style more like the typical kernel logging style.

Miscellanea:

o Realign arguments for these uses

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1595860111-3920-4-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 10:58:01 -07:00
Ryusuke Konishi
ae98043f5f nilfs2: convert to SPDX license tags
Remove the verbose license text from NILFS2 files and replace them with
SPDX tags.  This does not change the license of any of the code.

Link: http://lkml.kernel.org/r/1535624528-5982-1-git-send-email-konishi.ryusuke@lab.ntt.co.jp
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-09-04 16:45:02 -07:00
Arnd Bergmann
fb04b91bc2 nilfs2: use time64_t internally
The superblock and segment timestamps are used only internally in nilfs2
and can be read out using sysfs.

Since we are using the old 'get_seconds()' interface and store the data
as timestamps, the behavior differs slightly between 64-bit and 32-bit
kernels, the latter will show incorrect timestamps after 2038 in sysfs,
and presumably fail completely in 2106 as comparisons go wrong.

This changes nilfs2 to use time64_t with ktime_get_real_seconds() to
handle timestamps, making the behavior consistent and correct on both
32-bit and 64-bit machines.

The on-disk format already uses 64-bit timestamps, so nothing changes
there.

Link: http://lkml.kernel.org/r/20180122211050.1286441-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06 18:32:45 -08:00
Ryusuke Konishi
4d685f930a nilfs2: align block comments of nilfs_sufile_truncate_range() at *
Fix the following checkpatch warning:

 WARNING: Block comments should align the * on each line
 #633: FILE: sufile.c:633:
 +/**
 +  * nilfs_sufile_truncate_range - truncate range of segment array

Link: http://lkml.kernel.org/r/1509367935-3086-4-git-send-email-konishi.ryusuke@lab.ntt.co.jp
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17 16:10:03 -08:00
Ryusuke Konishi
e63e88bc53 nilfs2: move ioctl interface and disk layout to uapi separately
The header file "include/linux/nilfs2_fs.h" is composed of parts for
ioctl and disk format, and both are intended to be shared with user
space programs.

This moves them to the uapi directory "include/uapi/linux" splitting the
file to "nilfs2_api.h" and "nilfs2_ondisk.h".  The following minor
changes are accompanied by this migration:

 - nilfs_direct_node struct in nilfs2/direct.h is converged to
   nilfs2_ondisk.h because it's an on-disk structure.
 - inline functions nilfs_rec_len_from_disk() and
   nilfs_rec_len_to_disk() are moved to nilfs2/dir.c.

Link: http://lkml.kernel.org/r/1465825507-3407-4-git-send-email-konishi.ryusuke@lab.ntt.co.jp
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02 19:35:21 -04:00
Ryusuke Konishi
4ce5c3426c nilfs2: use BIT() macro
Replace bit shifts by BIT macro for clarity.

Link: http://lkml.kernel.org/r/1465825507-3407-3-git-send-email-konishi.ryusuke@lab.ntt.co.jp
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02 19:35:21 -04:00
Ryusuke Konishi
feee880fa5 nilfs2: reduce bare use of printk() with nilfs_msg()
Replace most use of printk() in nilfs2 implementation with nilfs_msg(),
and reduce the following checkpatch.pl warning:

  "WARNING: Prefer [subsystem eg: netdev]_crit([subsystem]dev, ...
   then dev_crit(dev, ... then pr_crit(...  to printk(KERN_CRIT ..."

This patch also fixes a minor checkpatch warning "WARNING: quoted string
split across lines" that often accompanies the prior warning, and amends
message format as needed.

Link: http://lkml.kernel.org/r/1464875891-5443-5-git-send-email-konishi.ryusuke@lab.ntt.co.jp
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02 19:35:17 -04:00
Ryusuke Konishi
4ad364ca1c nilfs2: add missing line spacing
Clean up checkpatch.pl warnings "WARNING: Missing a blank line after
declarations" from nilfs2.

Link: http://lkml.kernel.org/r/1461935747-10380-11-git-send-email-konishi.ryusuke@lab.ntt.co.jp
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-23 17:04:14 -07:00
Ryusuke Konishi
4b420ab4ee nilfs2: clean up old e-mail addresses
E-mail addresses of osrg.net domain are no longer available.  This
removes them from authorship notices and prevents reporters from being
confused.

Link: http://lkml.kernel.org/r/1461935747-10380-5-git-send-email-konishi.ryusuke@lab.ntt.co.jp
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-23 17:04:14 -07:00
Ryusuke Konishi
5726d0b454 nilfs2: remove FSF mailing address from GPL notices
This removes the extra paragraph which mentions FSF address in GPL
notices from source code of nilfs2 and avoids the checkpatch.pl error
related to it.

Link: http://lkml.kernel.org/r/1461935747-10380-4-git-send-email-konishi.ryusuke@lab.ntt.co.jp
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-23 17:04:14 -07:00
Ryusuke Konishi
f19e78dee9 nilfs2: remove space before comma
Fix checkpatch.pl error "ERROR: space prohibited before that ','
(ctx:WxW)" at nilfs_sufile_set_suinfo().

This also fixes checkpatch.pl warning "WARNING: Prefer 'unsigned int' to
bare use of 'unsigned'" at nilfs_sufile_set_suinfo() and
nilfs_sufile_get_suinfo().

Link: http://lkml.kernel.org/r/1461935747-10380-3-git-send-email-konishi.ryusuke@lab.ntt.co.jp
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-23 17:04:14 -07:00
Ryusuke Konishi
09ef29e0f6 nilfs2: fix gcc unused-but-set-variable warnings
Fix the following build warnings:

 $ make W=1
 [...]
   CC [M]  fs/nilfs2/btree.o
 fs/nilfs2/btree.c: In function 'nilfs_btree_split':
 fs/nilfs2/btree.c:923:8: warning: variable 'newptr' set but not used [-Wunused-but-set-variable]
   __u64 newptr;
         ^
 fs/nilfs2/btree.c:922:8: warning: variable 'newkey' set but not used [-Wunused-but-set-variable]
   __u64 newkey;
         ^
   CC [M]  fs/nilfs2/dat.o
 fs/nilfs2/dat.c: In function 'nilfs_dat_prepare_end':
 fs/nilfs2/dat.c:158:8: warning: variable 'start' set but not used [-Wunused-but-set-variable]
   __u64 start;
         ^
   CC [M]  fs/nilfs2/segment.o
 fs/nilfs2/segment.c: In function 'nilfs_segctor_do_immediate_flush':
 fs/nilfs2/segment.c:2433:6: warning: variable 'err' set but not used [-Wunused-but-set-variable]
   int err;
       ^
   CC [M]  fs/nilfs2/sufile.o
 fs/nilfs2/sufile.c: In function 'nilfs_sufile_alloc':
 fs/nilfs2/sufile.c:320:27: warning: variable 'ncleansegs' set but not used [-Wunused-but-set-variable]
   unsigned long nsegments, ncleansegs, nsus, cnt;
                            ^
   CC [M]  fs/nilfs2/alloc.o
 fs/nilfs2/alloc.c: In function 'nilfs_palloc_prepare_alloc_entry':
 fs/nilfs2/alloc.c:478:38: warning: variable 'groups_per_desc_block' set but not used [-Wunused-but-set-variable]
   unsigned long n, entries_per_group, groups_per_desc_block;
                                       ^

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Hitoshi Mitake
83eec5e6dd nilfs2: add tracepoints for analyzing sufile manipulation
This patch adds tracepoints which would be useful for analyzing segment
usage from a perspective of high level sufile manipulation (check, alloc,
free).  sufile is an important in-place updated metadata file, so
analyzing the behavior would be useful for performance turning.

example of usage (a case of allocation):

$ sudo bin/tpoint nilfs2:nilfs2_segment_usage_allocated
Tracing nilfs2:nilfs2_segment_usage_allocated. Ctrl-C to end.
        segctord-17800 [002] ...1 10671.867294: nilfs2_segment_usage_allocated: sufile = ffff880054f908a8 segnum = 2
        segctord-17800 [002] ...1 10675.073477: nilfs2_segment_usage_allocated: sufile = ffff880054f908a8 segnum = 3

Signed-off-by: Hitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benixon Dhas <benixon.dhas@wdc.com>
Cc: TK Kato <TK.Kato@wdc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Ryusuke Konishi
0ec060d188 nilfs2: verify metadata sizes read from disk
Add code to check sizes of on-disk data of metadata files such as inode
size, segment usage size, DAT entry size, and checkpoint size.  Although
these sizes are read from disk, the current implementation doesn't check
them.

If these sizes are not sane on disk, it can cause out-of-range access to
metadata or memory access overrun on metadata block buffers due to
overflow in sundry calculations.

Both lower limit and upper limit of metadata sizes are verified to
prevent these issues.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Andreas Rohner <andreas.rohner@gmx.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:26 -07:00
Andreas Rohner
82e11e857b nilfs2: add nilfs_sufile_trim_fs to trim clean segs
Add nilfs_sufile_trim_fs(), which takes an fstrim_range structure and
calls blkdev_issue_discard for every clean segment in the specified
range.  The range is truncated to file system block boundaries.

Signed-off-by: Andreas Rohner <andreas.rohner@gmx.net>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:25 -07:00
Andreas Rohner
00e9ffcd27 nilfs2: add nilfs_sufile_set_suinfo to update segment usage
Introduce nilfs_sufile_set_suinfo(), which expects an array of
nilfs_suinfo_update structures and updates the segment usage information
accordingly.

This is basically a helper function for the newly introduced
NILFS_IOCTL_SET_SUINFO ioctl.

[konishi.ryusuke@lab.ntt.co.jp: use put_bh() instead of brelse() because we know bh != NULL]
Signed-off-by: Andreas Rohner <andreas.rohner@gmx.net>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:25 -07:00
Vyacheslav Dubeyko
f5974c8f8c nilfs2: add omitted comments for different structures in driver implementation
Add omitted comments for different structures in driver implementation.

Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-30 17:25:19 -07:00
Cong Wang
7b9c0976ac nilfs2: remove the second argument of k[un]map_atomic()
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20 21:48:24 +08:00
Ryusuke Konishi
5fc7b14177 nilfs2: use mark_buffer_dirty to mark btnode or meta data dirty
This replaces nilfs_mdt_mark_buffer_dirty and nilfs_btnode_mark_dirty
macros with mark_buffer_dirty and gets rid of nilfs_mark_buffer_dirty,
an own mark buffer dirty function.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-05-10 22:21:57 +09:00
Ryusuke Konishi
0ef28f9aec nilfs2: get rid of NILFS_I_NILFS
This replaces all references of NILFS_I_NILFS(inode)->ns_bdev with
inode->i_sb->s_bdev and unfolds remaining uses of NILFS_I_NILFS inline
function.

Before 2.6.37, referring to a nilfs object from inodes needed a
conditional judgement, and NILFS_I_NILFS was helpful to simplify it.
But now we can simply do it by going through a super block instance
like inode->i_sb->s_fs_info.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-05-10 22:21:56 +09:00
Ryusuke Konishi
4e33f9eab0 nilfs2: implement resize ioctl
This adds resize ioctl which makes online resize possible.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-05-10 22:21:46 +09:00
Ryusuke Konishi
78eb64c247 nilfs2: add truncation routine of segment usage file
When shrinking the filesystem, segments to be truncated must be test
if they are busy or not, and unneeded sufile block should be deleted.
This adds routines for the truncation.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-05-10 22:21:45 +09:00
Ryusuke Konishi
619205da5b nilfs2: add ioctl which limits range of segment to be allocated
This adds a new ioctl command which limits range of segment to be
allocated.  This is intended to gather data whithin a range of the
partition before shrinking the filesystem, or to control new log
location for some purpose.

If a range is specified by the ioctl, segment allocator of nilfs tries
to allocate new segments from the range unless no free segments are
available there.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-05-10 22:21:45 +09:00
Ryusuke Konishi
c6e071884a nilfs2: get rid of mi_nilfs back pointer to nilfs object
This removes a back pointer to nilfs object from nilfs_mdt_info
structure that is attached to metadata files.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23 09:24:38 +09:00
Ryusuke Konishi
f1e89c86fd nilfs2: use iget for all metadata files
This makes use of iget5_locked to allocate or get inode for metadata
files to stop using own inode allocator.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23 09:24:38 +09:00
Ryusuke Konishi
7a65004bba nilfs2: fix various typos in comments
This fixes various typos I found in comments of nilfs2.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-03-14 10:29:51 +09:00
Ryusuke Konishi
f021759d74 nilfs2: clean up get/put function of a segment usage
This eliminates obsolete nilfs_get_sufile_get_segment_usage() and
nilfs_set_sufile_segment_usage() from sufile.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:51 +09:00
Ryusuke Konishi
071ec54dd7 nilfs2: move routine to set segment usage into sufile
This adds nilfs_sufile_set_segment_usage() function in sufile to
replace direct access to the sufile metadata in log writer code.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:51 +09:00
Ryusuke Konishi
61a189e9c6 nilfs2: move routine marking segment usage dirty into sufile
This adds nilfs_sufile_mark_dirty() function in sufile to replace
nilfs_touch_segusage() function in log writer code.  This is a
preparation for the further cleanup which will move out low level
sufile operations in the log writer.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:51 +09:00
Ryusuke Konishi
ef7d4757a5 nilfs2: simplify nilfs_sufile_get_ncleansegs function
Previously, this function took an status code to return possible error
codes.  The ("nilfs2: add local variable to cache the number of clean
segments") patch removed the possibility to return errors.

So, this simplifies the function definition to make it directly return
the number of clean segments.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:49 +09:00
Ryusuke Konishi
aa474a2201 nilfs2: add local variable to cache the number of clean segments
This makes it possible for sufile to get the number of clean segments
faster.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:49 +09:00
Ryusuke Konishi
7b16c8a211 nilfs2: unfold nilfs_sufile_block_get_header function
This unfolds the nilfs_sufile_block_get_header() function for
simplicity.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:48 +09:00
Ryusuke Konishi
8707df3847 nilfs2: separate read method of meta data files on super root block
Will displace nilfs_mdt_read_inode_direct function with an individual
read method: nilfs_dat_read, nilfs_sufile_read, nilfs_cpfile_read.

This provides the opportunity to initialize local variables of each
metadata file after reading the inode.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:48 +09:00
Ryusuke Konishi
79739565e1 nilfs2: separate constructor of metadata files
This will displace nilfs_mdt_new() constructor with individual
metadata file constructors like nilfs_dat_new(), new_sufile_new(),
nilfs_cpfile_new(), and nilfs_ifile_new().

This makes it possible for each metadata file to have own
intialization code.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:48 +09:00
Ryusuke Konishi
003ff182fd nilfs2: allow future expansion of metadata read out via get info ioctl
Nilfs has some ioctl commands to read out metadata from meta data
files:

 - NILFS_IOCTL_GET_CPINFO for checkpoint file,
 - NILFS_IOCTL_GET_SUINFO for segment usage file, and
 - NILFS_IOCTL_GET_VINFO for Disk Address Transalation (DAT) file,
   respectively.

Every routine on these metadata files is implemented so that it allows
future expansion of on-disk format.  But, the above ioctl commands do
not support expansion even though nilfs_argv structure can handle
arbitrary size for data exchanged via ioctl.

This allows future expansion of the following structures which give
basic format of the "get information" ioctls:

 - struct nilfs_cpinfo
 - struct nilfs_suinfo
 - struct nilfs_vinfo

So, this introduces forward compatility of such ioctl commands.

In this patch, a sanity check in nilfs_ioctl_get_info() function is
changed to accept larger data structure [1], and metadata read
routines are rewritten so that they become compatible for larger
structures; the routines will just ignore the remaining fields which
the current version of nilfs doesn't know.

[1] The ioctl function already has another upper limit (PAGE_SIZE
    against a structure, which appears in nilfs_ioctl_wrap_copy
    function), and this will not cause security problem.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10 23:41:11 +09:00
Ryusuke Konishi
dda54f4b87 nilfs2: add sufile function that can modify multiple segment usages
This is a preparation for the later cleanup patch ("nilfs2: remove
list of freeing segments").

This adds nilfs_sufile_updatev() to sufile, which can modify multiple
segment usages at a time.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10 23:41:09 +09:00
Ryusuke Konishi
c85399c2da nilfs2: fix possible mismatch of sufile counters on recovery
On-disk counters ndirtysegs and ncleansegs of sufile, can go wrong
after roll-forward recovery because
nilfs_prepare_segment_for_recovery() function marks segments dirty
without adjusting value of these counters.

This fixes the problem by adding a function to sufile which does the
operation adjusting the counters, and by letting the recovery function
use it.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-04-13 09:53:52 +09:00
Ryusuke Konishi
a703018f7b nilfs2: segment usage file cleanups
This will simplify sufile.c by sharing common code which repeatedly
appears in routines updating a segment usage entry; a wrapper function
nilfs_sufile_update() is introduced for the purpose, and counter
modifications are integrated to a new function
nilfs_sufile_mod_counter().

This is a preparation for the successive bugfix patch ("nilfs2: fix
possible mismatch of sufile counters on recovery").

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-04-13 09:53:51 +09:00
Ryusuke Konishi
88072faf9a nilfs2: fix wrong accounting and duplicate brelse in nilfs_sufile_set_error
The nilfs_sufile_set_error() function wrongly adjusts the number of
dirty segments instead of the number of clean segments.  In addition,
the function calls brelse() twice for the same buffer head.

This fixes these bugs.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-04-13 09:53:51 +09:00
Ryusuke Konishi
3efb55b496 nilfs2: simplify handling of active state of segments fix
This fixes a bug of ("nilfs2: simplify handling of active state of
segments") patch.  The patch did not take account that a base index is
increased in nilfs_sufile_get_suinfo() function if requested entries
go across block boundary on sufile.

Due to this bug, the active flag sometimes appears on wrong segments
and has induced malfunction of garbage collection.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-04-13 09:53:51 +09:00
Ryusuke Konishi
cece552074 nilfs2: simplify handling of active state of segments
will reduce some lines of segment constructor.  Previously, the state was
complexly controlled through a list of segments in order to keep
consistency in meta data of usage state of segments.  Instead, this
presents ``calculated'' active flags to userland cleaner program and stop
maintaining its real flag on disk.

Only by this fake flag, the cleaner cannot exactly know if each segment is
reclaimable or not.  However, the recent extension of nilfs_sustat ioctl
struct (nilfs2-extend-nilfs_sustat-ioctl-struct.patch) can prevent the
cleaner from reclaiming in-use segment wrongly.

So, now I can apply this for simplification.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:20 -07:00
Ryusuke Konishi
1f5abe7e7d nilfs2: replace BUG_ON and BUG calls triggerable from ioctl
Pekka Enberg advised me:
> It would be nice if BUG(), BUG_ON(), and panic() calls would be
> converted to proper error handling using WARN_ON() calls. The BUG()
> call in nilfs_cpfile_delete_checkpoints(), for example, looks to be
> triggerable from user-space via the ioctl() system call.

This will follow the comment and keep them to a minimum.

Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:19 -07:00
Ryusuke Konishi
2c2e52fc4f nilfs2: extend nilfs_sustat ioctl struct
This adds a new argument to the nilfs_sustat structure.

The extended field allows to delete volatile active state of segments,
which was needed to protect freshly-created segments from garbage
collection but has confused code dealing with segments.  This
extension alleviates the mess and gives room for further
simplifications.

The volatile active flag is not persistent, so it's eliminable on this
occasion without affecting compatibility other than the ioctl change.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:19 -07:00
Koji Sato
6c98cd4ecb nilfs2: segment usage file
This adds a meta data file which stores the allocation state of segments.

[konishi.ryusuke@lab.ntt.co.jp: fix wrong counting of checkpoints and dirty segments]
Signed-off-by: Koji Sato <sato.koji@lab.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:14 -07:00