This patch built on top of Commit 299603e837
("net-gro: Prepare GRO stack for the upcoming tunneling support") to add
the support of the standard GRE (RFC1701/RFC2784/RFC2890) to the GRO
stack. It also serves as an example for supporting other encapsulation
protocols in the GRO stack in the future.
The patch supports version 0 and all the flags (key, csum, seq#) but
will flush any pkt with the S (seq#) flag. This is because the S flag
is not support by GSO, and a GRO pkt may end up in the forwarding path,
thus requiring GSO support to break it up correctly.
Currently the "packet_offload" structure only contains L3 (ETH_P_IP/
ETH_P_IPV6) GRO offload support so the encapped pkts are limited to
IP pkts (i.e., w/o L2 hdr). But support for other protocol type can
be easily added, so is the support for GRE variations like NVGRE.
The patch also support csum offload. Specifically if the csum flag is on
and the h/w is capable of checksumming the payload (CHECKSUM_COMPLETE),
the code will take advantage of the csum computed by the h/w when
validating the GRE csum.
Note that commit 60769a5dcd "ipv4: gre:
add GRO capability" already introduces GRO capability to IPv4 GRE
tunnels, using the gro_cells infrastructure. But GRO is done after
GRE hdr has been removed (i.e., decapped). The following patch applies
GRO when pkts first come in (before hitting the GRE tunnel code). There
is some performance advantage for applying GRO as early as possible.
Also this approach is transparent to other subsystem like Open vSwitch
where GRE decap is handled outside of the IP stack hence making it
harder for the gro_cells stuff to apply. On the other hand, some NICs
are still not capable of hashing on the inner hdr of a GRE pkt (RSS).
In that case the GRO processing of pkts from the same remote host will
all happen on the same CPU and the performance may be suboptimal.
I'm including some rough preliminary performance numbers below. Note
that the performance will be highly dependent on traffic load, mix as
usual. Moreover it also depends on NIC offload features hence the
following is by no means a comprehesive study. Local testing and tuning
will be needed to decide the best setting.
All tests spawned 50 copies of netperf TCP_STREAM and ran for 30 secs.
(super_netperf 50 -H 192.168.1.18 -l 30)
An IP GRE tunnel with only the key flag on (e.g., ip tunnel add gre1
mode gre local 10.246.17.18 remote 10.246.17.17 ttl 255 key 123)
is configured.
The GRO support for pkts AFTER decap are controlled through the device
feature of the GRE device (e.g., ethtool -K gre1 gro on/off).
1.1 ethtool -K gre1 gro off; ethtool -K eth0 gro off
thruput: 9.16Gbps
CPU utilization: 19%
1.2 ethtool -K gre1 gro on; ethtool -K eth0 gro off
thruput: 5.9Gbps
CPU utilization: 15%
1.3 ethtool -K gre1 gro off; ethtool -K eth0 gro on
thruput: 9.26Gbps
CPU utilization: 12-13%
1.4 ethtool -K gre1 gro on; ethtool -K eth0 gro on
thruput: 9.26Gbps
CPU utilization: 10%
The following tests were performed on a different NIC that is capable of
csum offload. I.e., the h/w is capable of computing IP payload csum
(CHECKSUM_COMPLETE).
2.1 ethtool -K gre1 gro on (hence will use gro_cells)
2.1.1 ethtool -K eth0 gro off; csum offload disabled
thruput: 8.53Gbps
CPU utilization: 9%
2.1.2 ethtool -K eth0 gro off; csum offload enabled
thruput: 8.97Gbps
CPU utilization: 7-8%
2.1.3 ethtool -K eth0 gro on; csum offload disabled
thruput: 8.83Gbps
CPU utilization: 5-6%
2.1.4 ethtool -K eth0 gro on; csum offload enabled
thruput: 8.98Gbps
CPU utilization: 5%
2.2 ethtool -K gre1 gro off
2.2.1 ethtool -K eth0 gro off; csum offload disabled
thruput: 5.93Gbps
CPU utilization: 9%
2.2.2 ethtool -K eth0 gro off; csum offload enabled
thruput: 5.62Gbps
CPU utilization: 8%
2.2.3 ethtool -K eth0 gro on; csum offload disabled
thruput: 7.69Gbps
CPU utilization: 8%
2.2.4 ethtool -K eth0 gro on; csum offload enabled
thruput: 8.96Gbps
CPU utilization: 5-6%
Signed-off-by: H.K. Jerry Chu <hkchu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When lo is brought up, new ifa is created. Then, devconf and neigh values
bitfield should be set so later changes of default values would not
affect lo values.
Note that the same behaviour is in ipv6. Also note that this is likely
not an issue in many distros (for example Fedora 19) because userspace
sets address to lo manually before bringing it up.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
GRO/GSO layers can be enabled on a node, even if said
node is only forwarding packets.
This patch permits GSO (and upcoming GRO) support for GRE
encapsulated packets, even if the host has no GRE tunnel setup.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: H.K. Jerry Chu <hkchu@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c
net/ipv6/ip6_tunnel.c
net/ipv6/ip6_vti.c
ipv6 tunnel statistic bug fixes conflicting with consolidation into
generic sw per-cpu net stats.
qlogic conflict between queue counting bug fix and the addition
of multiple MAC address support.
Signed-off-by: David S. Miller <davem@davemloft.net>
TCP out_of_order_queue lock is not used, as queue manipulation
happens with socket lock held and we therefore use the lockless
skb queue routines (as __skb_queue_head())
We can use __skb_queue_head_init() instead of skb_queue_head_init()
to make this more consistent.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says: <pablo@netfilter.org>
====================
nftables updates for net-next
The following patchset contains nftables updates for your net-next tree,
they are:
* Add set operation to the meta expression by means of the select_ops()
infrastructure, this allows us to set the packet mark among other things.
From Arturo Borrero Gonzalez.
* Fix wrong format in sscanf in nf_tables_set_alloc_name(), from Daniel
Borkmann.
* Add new queue expression to nf_tables. These comes with two previous patches
to prepare this new feature, one to add mask in nf_tables_core to
evaluate the queue verdict appropriately and another to refactor common
code with xt_NFQUEUE, from Eric Leblond.
* Do not hide nftables from Kconfig if nfnetlink is not enabled, also from
Eric Leblond.
* Add the reject expression to nf_tables, this adds the missing TCP RST
support. It comes with an initial patch to refactor common code with
xt_NFQUEUE, again from Eric Leblond.
* Remove an unused variable assignment in nf_tables_dump_set(), from Michal
Nazarewicz.
* Remove the nft_meta_target code, now that Arturo added the set operation
to the meta expression, from me.
* Add help information for nf_tables to Kconfig, also from me.
* Allow to dump all sets by specifying NFPROTO_UNSPEC, similar feature is
available to other nf_tables objects, requested by Arturo, from me.
* Expose the table usage counter, so we can know how many chains are using
this table without dumping the list of chains, from Tomasz Bursztyka.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
netfilter/IPVS updates for net-next
The following patchset contains Netfilter updates for your net-next tree,
they are:
* Add full port randomization support. Some crazy researchers found a way
to reconstruct the secure ephemeral ports that are allocated in random mode
by sending off-path bursts of UDP packets to overrun the socket buffer of
the DNS resolver to trigger retransmissions, then if the timing for the
DNS resolution done by a client is larger than usual, then they conclude
that the port that received the burst of UDP packets is the one that was
opened. It seems a bit aggressive method to me but it seems to work for
them. As a result, Daniel Borkmann and Hannes Frederic Sowa came up with a
new NAT mode to fully randomize ports using prandom.
* Add a new classifier to x_tables based on the socket net_cls set via
cgroups. These includes two patches to prepare the field as requested by
Zefan Li. Also from Daniel Borkmann.
* Use prandom instead of get_random_bytes in several locations of the
netfilter code, from Florian Westphal.
* Allow to use the CTA_MARK_MASK in ctnetlink when mangling the conntrack
mark, also from Florian Westphal.
* Fix compilation warning due to unused variable in IPVS, from Geert
Uytterhoeven.
* Add support for UID/GID via nfnetlink_queue, from Valentina Giusti.
* Add IPComp extension to x_tables, from Fan Du.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
They are same, so unify them as one, pcpu_sw_netstats.
Define pcpu_sw_netstat in netdevice.h, remove pcpu_tstats
from if_tunnel and remove br_cpu_netstats from br_private.h
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
percpu route cache eliminates share of dst refcnt between CPUs.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Avoid doing a route lookup on every packet being tunneled.
In ip_tunnel.c cache the route returned from ip_route_output if
the tunnel is "connected" so that all the rouitng parameters are
taken from tunnel parms for a packet. Specifically, not NBMA tunnel
and tos is from tunnel parms (not inner packet).
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The following code is not used in current upstream code.
Some of this seems to be old hooks, other might be used by some
out of tree module (which I don't care about breaking), and
the need_ipv4_conntrack was used by old NAT code but no longer
called.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
VM to VM GSO traffic is broken if it goes through VXLAN or GRE
tunnel and the physical NIC on the host supports hardware VXLAN/GRE
GSO offload (e.g. bnx2x and next-gen mlx4).
Two issues -
(VXLAN) VM traffic has SKB_GSO_DODGY and SKB_GSO_UDP_TUNNEL with
SKB_GSO_TCP/UDP set depending on the inner protocol. GSO header
integrity check fails in udp4_ufo_fragment if inner protocol is
TCP. Also gso_segs is calculated incorrectly using skb->len that
includes tunnel header. Fix: robust check should only be applied
to the inner packet.
(VXLAN & GRE) Once GSO header integrity check passes, NULL segs
is returned and the original skb is sent to hardware. However the
tunnel header is already pulled. Fix: tunnel header needs to be
restored so that hardware can perform GSO properly on the original
packet.
Signed-off-by: Wei-Chun Chao <weichunc@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gratuitous arp packets are useful in switchover scenarios to update
client arp tables as quickly as possible. Currently, the mac address
of a neighbour is only updated after a locktime period has elapsed
since the last update. In most use cases such delays are unacceptable
for network admins. Moreover, the "updated" field of the neighbour
stucture doesn't record the last time the address of a neighbour
changed but records any change that happens to the neighbour. This is
clearly a bug since locktime uses that field as meaning "addr_updated".
With this observation, I was able to perpetuate a stale address by
sending a stream of gratuitous arp packets spaced less than locktime
apart. With this change the address is updated when a gratuitous arp
is received and the arp_accept sysctl is set.
Signed-off-by: Salam Noureddine <noureddine@aristanetworks.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch moves nft_reject_ipv4 to nft_reject and adds support
for IPv6 protocol. This patch uses functions included in nf_reject.h
to implement reject by TCP reset.
The code has to be build as a module if NF_TABLES_IPV6 is also a
module to avoid compilation error due to usage of IPv6 functions.
This has been done in Kconfig by using the construct:
depends on NF_TABLES_IPV6 || !NF_TABLES_IPV6
This seems a bit weird in terms of syntax but works perfectly.
Signed-off-by: Eric Leblond <eric@regit.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch prepares the addition of TCP reset support in
the nft_reject module by moving reusable code into a header
file.
Signed-off-by: Eric Leblond <eric@regit.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Remove leftover code that is not used anywhere in current tree.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The following are only used in one file:
tcp_connect_init
tcp_set_rto
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't export ping_table or ping_v4_sendmsg. Both are only used
inside ping code.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
inetpeer_invalidate_family defined but never used
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't export arp_invalidate, only used in arp.c
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make fib_detect_death function static only used in one file.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This cleanup the comments in tcp_yeah.c.
1.The old link is dead,use a new one to instead.
2.'lin' add nothing useful,remove it.
3.do not use C99 // comments.
Signed-off-by: Weilong Chen <chenweilong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix checkpatch errors like:
ERROR: spaces required around that XXX
Signed-off-by: Weilong Chen <chenweilong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We report different pmtu values back on the first write and on further
writes on an corked socket.
Also don't include the dst.header_len (respectively exthdrlen) as this
should already be dealt with by the interface mtu of the outgoing
(virtual) interface and policy of that interface should dictate if
fragmentation should happen.
Instead reduce the pmtu data by IP options as we do for IPv6. Make the
same changes for ip_append_data, where we did not care about options or
dst.header_len at all.
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use same field for both IPv4 (proxy_arp) and IPv6 (proxy_ndp)
so fix it before API is set to be a common name
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem noticed a TCP_RR regression caused by TCP autocorking
on a Mellanox test bed. MLX4_EN_TX_COAL_TIME is 16 us, which can be
right above RTT between hosts.
We can receive a ACK for a packet still in NIC TX ring buffer or in a
softnet completion queue.
Fix this by always pushing the skb if it is at the head of write queue.
Also, as TX completion is lockless, it's safer to perform sk_wmem_alloc
test after setting TSQ_THROTTLED.
erd:~# MIB="MIN_LATENCY,MEAN_LATENCY,MAX_LATENCY,P99_LATENCY,STDDEV_LATENCY"
erd:~# ./netperf -H remote -t TCP_RR -- -o $MIB | tail -n 1
(repeat 3 times)
Before patch :
18,1049.87,41004,39631,6295.47
17,239.52,40804,48,2912.79
18,348.40,40877,54,3573.39
After patch :
18,22.84,4606,38,16.39
17,21.56,2871,36,13.51
17,22.46,2705,37,11.83
Reported-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: f54b311142 ("tcp: auto corking")
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2013-12-19
1) Use the user supplied policy index instead of a generated one
if present. From Fan Du.
2) Make xfrm migration namespace aware. From Fan Du.
3) Make the xfrm state and policy locks namespace aware. From Fan Du.
4) Remove ancient sleeping when the SA is in acquire state,
we now queue packets to the policy instead. This replaces the
sleeping code.
5) Remove FLOWI_FLAG_CAN_SLEEP. This was used to notify xfrm about the
posibility to sleep. The sleeping code is gone, so remove it.
6) Check user specified spi for IPComp. Thr spi for IPcomp is only
16 bit wide, so check for a valid value. From Fan Du.
7) Export verify_userspi_info to check for valid user supplied spi ranges
with pfkey and netlink. From Fan Du.
8) RFC3173 states that if the total size of a compressed payload and the IPComp
header is not smaller than the size of the original payload, the IP datagram
must be sent in the original non-compressed form. These packets are dropped
by the inbound policy check because they are not transformed. Document the need
to set 'level use' for IPcomp to receive such packets anyway. From Fan Du.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub reported while working with nlmon netlink sniffer that parts of
the inet_diag_sockid are not initialized when r->idiag_family != AF_INET6.
That is, fields of r->id.idiag_src[1 ... 3], r->id.idiag_dst[1 ... 3].
In fact, it seems that we can leak 6 * sizeof(u32) byte of kernel [slab]
memory through this. At least, in udp_dump_one(), we allocate a skb in ...
rep = nlmsg_new(sizeof(struct inet_diag_msg) + ..., GFP_KERNEL);
... and then pass that to inet_sk_diag_fill() that puts the whole struct
inet_diag_msg into the skb, where we only fill out r->id.idiag_src[0],
r->id.idiag_dst[0] and leave the rest untouched:
r->id.idiag_src[0] = inet->inet_rcv_saddr;
r->id.idiag_dst[0] = inet->inet_daddr;
struct inet_diag_msg embeds struct inet_diag_sockid that is correctly /
fully filled out in IPv6 case, but for IPv4 not.
So just zero them out by using plain memset (for this little amount of
bytes it's probably not worth the extra check for idiag_family == AF_INET).
Similarly, fix also other places where we fill that out.
Reported-by: Jakub Zawadzki <darkjames-ws@darkjames.pl>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ipgre_header_parse() needs to parse the tunnel's ip header and it
uses mac_header to locate the iphdr. This got broken when gre tunneling
was refactored as mac_header is no longer updated to point to iphdr.
Introduce skb_pop_mac_header() helper to do the mac_header assignment
and use it in ipgre_rcv() to fix msg_name parsing.
Bug introduced in commit c544193214 (GRE: Refactor GRE tunneling code.)
Cc: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
This new mode discards all incoming fragmentation-needed notifications
as I guess was originally intended with this knob. To not break backward
compatibility too much, I only added a special case for mode 2 in the
receiving path.
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The other field in ipv4_config, log_martians, was converted to a
per-interface setting, so we can just remove the whole structure.
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
drivers/net/ethernet/intel/i40e/i40e_main.c
drivers/net/macvtap.c
Both minor merge hassles, simple overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
In several places 'skb->rxhash = 0' is being done to clear the
rxhash value in an skb. This does not clear l4_rxhash which could
still be set so that the rxhash wouldn't be recalculated on subsequent
call to skb_get_rxhash. This patch adds an explict function to clear
all the rxhash related information in the skb properly.
skb_clear_hash_if_not_l4 clears the rxhash only if it is not marked as
l4_rxhash.
Fixed up places where 'skb->rxhash = 0' was being called.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While investigating performance problems on small RPC workloads,
I noticed linux TCP stack was always splitting the last TSO skb
into two parts (skbs). One being a multiple of MSS, and a small one
with the Push flag. This split is done even if TCP_NODELAY is set,
or if no small packet is in flight.
Example with request/response of 4K/4K
IP A > B: . ack 68432 win 2783 <nop,nop,timestamp 6524593 6525001>
IP A > B: . 65537:68433(2896) ack 69632 win 2783 <nop,nop,timestamp 6524593 6525001>
IP A > B: P 68433:69633(1200) ack 69632 win 2783 <nop,nop,timestamp 6524593 6525001>
IP B > A: . ack 68433 win 2768 <nop,nop,timestamp 6525001 6524593>
IP B > A: . 69632:72528(2896) ack 69633 win 2768 <nop,nop,timestamp 6525001 6524593>
IP B > A: P 72528:73728(1200) ack 69633 win 2768 <nop,nop,timestamp 6525001 6524593>
IP A > B: . ack 72528 win 2783 <nop,nop,timestamp 6524593 6525001>
IP A > B: . 69633:72529(2896) ack 73728 win 2783 <nop,nop,timestamp 6524593 6525001>
IP A > B: P 72529:73729(1200) ack 73728 win 2783 <nop,nop,timestamp 6524593 6525001>
We can avoid this split by including the Nagle tests at the right place.
Note : If some NIC had trouble sending TSO packets with a partial
last segment, we would have hit the problem in GRO/forwarding workload already.
tcp_minshall_update() is moved to tcp_output.c and is updated as we might
feed a TSO packet with a partial last segment.
This patch tremendously improves performance, as the traffic now looks
like :
IP A > B: . ack 98304 win 2783 <nop,nop,timestamp 6834277 6834685>
IP A > B: P 94209:98305(4096) ack 98304 win 2783 <nop,nop,timestamp 6834277 6834685>
IP B > A: . ack 98305 win 2768 <nop,nop,timestamp 6834686 6834277>
IP B > A: P 98304:102400(4096) ack 98305 win 2768 <nop,nop,timestamp 6834686 6834277>
IP A > B: . ack 102400 win 2783 <nop,nop,timestamp 6834279 6834686>
IP A > B: P 98305:102401(4096) ack 102400 win 2783 <nop,nop,timestamp 6834279 6834686>
IP B > A: . ack 102401 win 2768 <nop,nop,timestamp 6834687 6834279>
IP B > A: P 102400:106496(4096) ack 102401 win 2768 <nop,nop,timestamp 6834687 6834279>
IP A > B: . ack 106496 win 2783 <nop,nop,timestamp 6834280 6834687>
IP A > B: P 102401:106497(4096) ack 106496 win 2783 <nop,nop,timestamp 6834280 6834687>
IP B > A: . ack 106497 win 2768 <nop,nop,timestamp 6834688 6834280>
IP B > A: P 106496:110592(4096) ack 106497 win 2768 <nop,nop,timestamp 6834688 6834280>
Before :
lpq83:~# nstat >/dev/null;perf stat ./super_netperf 200 -t TCP_RR -H lpq84 -l 20 -- -r 4K,4K
280774
Performance counter stats for './super_netperf 200 -t TCP_RR -H lpq84 -l 20 -- -r 4K,4K':
205719.049006 task-clock # 9.278 CPUs utilized
8,449,968 context-switches # 0.041 M/sec
1,935,997 CPU-migrations # 0.009 M/sec
160,541 page-faults # 0.780 K/sec
548,478,722,290 cycles # 2.666 GHz [83.20%]
455,240,670,857 stalled-cycles-frontend # 83.00% frontend cycles idle [83.48%]
272,881,454,275 stalled-cycles-backend # 49.75% backend cycles idle [66.73%]
166,091,460,030 instructions # 0.30 insns per cycle
# 2.74 stalled cycles per insn [83.39%]
29,150,229,399 branches # 141.699 M/sec [83.30%]
1,943,814,026 branch-misses # 6.67% of all branches [83.32%]
22.173517844 seconds time elapsed
lpq83:~# nstat | egrep "IpOutRequests|IpExtOutOctets"
IpOutRequests 16851063 0.0
IpExtOutOctets 23878580777 0.0
After patch :
lpq83:~# nstat >/dev/null;perf stat ./super_netperf 200 -t TCP_RR -H lpq84 -l 20 -- -r 4K,4K
280877
Performance counter stats for './super_netperf 200 -t TCP_RR -H lpq84 -l 20 -- -r 4K,4K':
107496.071918 task-clock # 4.847 CPUs utilized
5,635,458 context-switches # 0.052 M/sec
1,374,707 CPU-migrations # 0.013 M/sec
160,920 page-faults # 0.001 M/sec
281,500,010,924 cycles # 2.619 GHz [83.28%]
228,865,069,307 stalled-cycles-frontend # 81.30% frontend cycles idle [83.38%]
142,462,742,658 stalled-cycles-backend # 50.61% backend cycles idle [66.81%]
95,227,712,566 instructions # 0.34 insns per cycle
# 2.40 stalled cycles per insn [83.43%]
16,209,868,171 branches # 150.795 M/sec [83.20%]
874,252,952 branch-misses # 5.39% of all branches [83.37%]
22.175821286 seconds time elapsed
lpq83:~# nstat | egrep "IpOutRequests|IpExtOutOctets"
IpOutRequests 11239428 0.0
IpExtOutOctets 23595191035 0.0
Indeed, the occupancy of tx skbs (IpExtOutOctets/IpOutRequests) is higher :
2099 instead of 1417, thus helping GRO to be more efficient when using FQ packet
scheduler.
Many thanks to Neal for review and ideas.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Nandita Dukkipati <nanditad@google.com>
Cc: Van Jacobson <vanj@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
The following patchset contains two Netfilter fixes for your net
tree, they are:
* Fix endianness in nft_reject, the NFTA_REJECT_TYPE netlink attributes
was not converted to network byte order as needed by all nfnetlink
subsystems, from Eric Leblond.
* Restrict SYNPROXY target to INPUT and FORWARD chains, this avoid a
possible crash due to misconfigurations, from Patrick McHardy.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Using sk_dst_lock from softirq context is not supported right now.
Instead of adding BH protection everywhere,
udp_sk_rx_dst_set() can instead use xchg(), as suggested
by David.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Fixes: 9750223102 ("udp: ipv4: must add synchronization in udp_sk_rx_dst_set()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to netconf to show changes to proxy-arp status on a per
interface basis via netlink in a manner similar to forwarding
and reverse path state.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch modifies the GRO stack to avoid the use of "network_header"
and associated macros like ip_hdr() and ipv6_hdr() in order to allow
an arbitary number of IP hdrs (v4 or v6) to be used in the
encapsulation chain. This lays the foundation for various IP
tunneling support (IP-in-IP, GRE, VXLAN, SIT,...) to be added later.
With this patch, the GRO stack traversing now is mostly based on
skb_gro_offset rather than special hdr offsets saved in skb (e.g.,
skb->network_header). As a result all but the top layer (i.e., the
the transport layer) must have hdrs of the same length in order for
a pkt to be considered for aggregation. Therefore when adding a new
encap layer (e.g., for tunneling), one must check and skip flows
(e.g., by setting NAPI_GRO_CB(p)->same_flow to 0) that have a
different hdr length.
Note that unlike the network header, the transport header can and
will continue to be set by the GRO code since there will be at
most one "transport layer" in the encap chain.
Signed-off-by: H.K. Jerry Chu <hkchu@google.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The dump function in nft_reject_ipv4 was not converting a u32
field to network order before sending it to userspace, this
needs to happen for consistency with other nf_tables and
nfnetlink subsystems.
Signed-off-by: Eric Leblond <eric@regit.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Unlike TCP, UDP input path does not hold the socket lock.
Before messing with sk->sk_rx_dst, we must use a spinlock, otherwise
multiple cpus could leak a refcount.
This patch also takes care of renewing a stale dst entry.
(When the sk->sk_rx_dst would not be used by IP early demux)
Fixes: 421b3885bf ("udp: ipv4: Add udp early demux")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Shawn Bohrer <sbohrer@rgmadvisors.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
pskb_may_pull() can reallocate skb->head, we need to move the
initialization of iph and uh pointers after its call.
Fixes: 421b3885bf ("udp: ipv4: Add udp early demux")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Shawn Bohrer <sbohrer@rgmadvisors.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Help of this function says: "in_dev: only on this interface, 0=any interface",
but since commit 39a6d06300 ("[NETNS]: Process inet_confirm_addr in the
correct namespace."), the code supposes that it will never be NULL. This
function is never called with in_dev == NULL, but it's exported and may be used
by an external module.
Because this patch restore the ability to call inet_confirm_addr() with in_dev
== NULL, I partially revert the above commit, as suggested by Julian.
CC: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
