Commit graph

401547 commits

Author SHA1 Message Date
Mel Gorman
0255d49184 mm: Account for a THP NUMA hinting update as one PTE update
A THP PMD update is accounted for as 512 pages updated in vmstat.  This is
large difference when estimating the cost of automatic NUMA balancing and
can be misleading when comparing results that had collapsed versus split
THP. This patch addresses the accounting issue.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1381141781-10992-10-git-send-email-mgorman@suse.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-29 11:38:17 +01:00
Mel Gorman
3f926ab945 mm: Close races between THP migration and PMD numa clearing
THP migration uses the page lock to guard against parallel allocations
but there are cases like this still open

  Task A					Task B
  ---------------------				---------------------
  do_huge_pmd_numa_page				do_huge_pmd_numa_page
  lock_page
  mpol_misplaced == -1
  unlock_page
  goto clear_pmdnuma
						lock_page
						mpol_misplaced == 2
						migrate_misplaced_transhuge
  pmd = pmd_mknonnuma
  set_pmd_at

During hours of testing, one crashed with weird errors and while I have
no direct evidence, I suspect something like the race above happened.
This patch extends the page lock to being held until the pmd_numa is
cleared to prevent migration starting in parallel while the pmd_numa is
being cleared. It also flushes the old pmd entry and orders pagetable
insertion before rmap insertion.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1381141781-10992-9-git-send-email-mgorman@suse.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-29 11:38:05 +01:00
Mel Gorman
c61109e34f mm: numa: Sanitize task_numa_fault() callsites
There are three callers of task_numa_fault():

 - do_huge_pmd_numa_page():
     Accounts against the current node, not the node where the
     page resides, unless we migrated, in which case it accounts
     against the node we migrated to.

 - do_numa_page():
     Accounts against the current node, not the node where the
     page resides, unless we migrated, in which case it accounts
     against the node we migrated to.

 - do_pmd_numa_page():
     Accounts not at all when the page isn't migrated, otherwise
     accounts against the node we migrated towards.

This seems wrong to me; all three sites should have the same
sementaics, furthermore we should accounts against where the page
really is, we already know where the task is.

So modify all three sites to always account; we did after all receive
the fault; and always account to where the page is after migration,
regardless of success.

They all still differ on when they clear the PTE/PMD; ideally that
would get sorted too.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1381141781-10992-8-git-send-email-mgorman@suse.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-29 11:37:52 +01:00
Mel Gorman
587fe586f4 mm: Prevent parallel splits during THP migration
THP migrations are serialised by the page lock but on its own that does
not prevent THP splits. If the page is split during THP migration then
the pmd_same checks will prevent page table corruption but the unlock page
and other fix-ups potentially will cause corruption. This patch takes the
anon_vma lock to prevent parallel splits during migration.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1381141781-10992-7-git-send-email-mgorman@suse.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-29 11:37:39 +01:00
Mel Gorman
42836f5f8b mm: Wait for THP migrations to complete during NUMA hinting faults
The locking for migrating THP is unusual. While normal page migration
prevents parallel accesses using a migration PTE, THP migration relies on
a combination of the page_table_lock, the page lock and the existance of
the NUMA hinting PTE to guarantee safety but there is a bug in the scheme.

If a THP page is currently being migrated and another thread traps a
fault on the same page it checks if the page is misplaced. If it is not,
then pmd_numa is cleared. The problem is that it checks if the page is
misplaced without holding the page lock meaning that the racing thread
can be migrating the THP when the second thread clears the NUMA bit
and faults a stale page.

This patch checks if the page is potentially being migrated and stalls
using the lock_page if it is potentially being migrated before checking
if the page is misplaced or not.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1381141781-10992-6-git-send-email-mgorman@suse.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-29 11:37:19 +01:00
Mel Gorman
1dd49bfa34 mm: numa: Do not account for a hinting fault if we raced
If another task handled a hinting fault in parallel then do not double
account for it.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1381141781-10992-5-git-send-email-mgorman@suse.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-29 11:37:05 +01:00
Ingo Molnar
aac898548d Merge branch 'perf/urgent' into perf/core
Conflicts:
	tools/perf/builtin-record.c
	tools/perf/builtin-top.c
	tools/perf/util/hist.h
2013-10-29 11:23:32 +01:00
Ingo Molnar
cd65718712 perf/urgent fixes:
. Add color overhead for stdio output buffer, which fixes
   --stdio output being chopped up on the hot (red) entries,
   fix from Jiri Olsa.
 
 . Get 'perf record -g -a sleep 1' working again, removing the
   need for -- separating perf options from the workload, restoring
   ages old behaviour, fix from Jiri Olsa.
   More patches allowing ~/.perfconfig setting up of default
   callchain collecting method ("fp" or "dwarf") left for next
   merge window.
 
 . Fixup mmap event consumption, where we were acking the
   consumption by writing the tail before actually accessing
   the event, which could lead to using overwritten records
   in things like 'perf record --call-graph'.  from Zhouyi Zhou.
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJSbrexAAoJENZQFvNTUqpA+MIP/1dMAat/+jAobBvy9s69rJbT
 OV2QxqS5haA6rjbyogY7AiaCM/bSFO9dpLDF31NUTc3s6hiMsHnXnogQxvGGrBzT
 lzj45V9/a8XXl8Wxbpv0z4mI7ppNR3KjJdkBTsuqso5GivzMuG/8/N7ZxYB8kSlL
 vnWLRBKiBa/sDKIhKy5oEqmMMa+kPmwIXGZiKFxWkNMjmBtK80SB7MtPernhLNGf
 wj6EEulphPR1s8VHXqZIoijEvgw2vEXDTFapKd53EV+UPCII13NW7gicgPXyiWrY
 BIRW4Pwl98y9qHEc5gSq5Eotcl9JhIPQVegTSnvx8jJ7x0bYrxmChb/I9eAjWQcj
 YQAKGqUoQGu0PJv8TeIoGsxNMFxeeeMKzf275KKc5g6Les6gIHYKOmW7RPXHIIA7
 DHGYOJ808jMrNFmAkKNmxQGbE7forMFj6CPDgGpGezqTUbGsszpzga2QQgI0QmrY
 l8aPUsirF5cZ67vPk7dnUt58FayfKMdGME2dkU352hjOL1V5EeVdxx46zZsPQNyQ
 evQvkGBmRm6WFi6Sybjc6i4Gkn9F1O5sNDtEDbSQ6aZH5tNnktzLoufPrWwHKV95
 GzEHpCuAeZbagPF6WSxpNTb2xfScPb6PfveGm0gbypwl/KaAr47w8VCWJiuvpSOv
 yV83qEooKW0LUn4JXrH3
 =U+a8
 -----END PGP SIGNATURE-----

Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

 * Add color overhead for stdio output buffer, which fixes
   --stdio output being chopped up on the hot (red) entries,
   fix from Jiri Olsa.

 * Get 'perf record -g -a sleep 1' working again, removing the
   need for -- separating perf options from the workload, restoring
   ages old behaviour, fix from Jiri Olsa.
   More patches allowing ~/.perfconfig setting up of default
   callchain collecting method ("fp" or "dwarf") left for next
   merge window.

 * Fixup mmap event consumption, where we were acking the
   consumption by writing the tail before actually accessing
   the event, which could lead to using overwritten records
   in things like 'perf record --call-graph'. From Zhouyi Zhou.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-29 09:06:07 +01:00
Linus Torvalds
c9ca72fc56 Xtensa patchset for v3.12-rc6
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJSXuCxAAoJEI9vqH3mFV2sdWwP/11xVQFtzoT01k9P4fZeFCMT
 +dGztMBY6bODMEyeC9raX6sJhuOYNivS2IBFJ4qv9p+kcCplYE0EsB3MfOQ60NdV
 eV2DdnHrPKgIPUutGf7mcZ5bXB8q8HEuEFn0ONsCdNTAxzrcLxaPZU3MeGhSfL0H
 d/RPPmSW8+vLEMWUe58EB2J8Z1DJye4O0pbxskjGA64KrLssKBG3LWBQBdTsihkE
 r2olYYT0j7osJ7loLbyll/CcacQTfJbQT8Xd0Y7MbLYR/G6EVMwb6PkzkFnUPMIQ
 zLwMAOgL8/E250p4ab0Wy8vf9rW+938qR93oZEyO8TRDdF/mYNQb+GK+ZKUrMrxg
 eZ/pOhKQ+xUKtt23xrvbXR3nTnI9AfiJ1nhuO4UmX5WIhyJXDcYYk+rujlEduxGm
 IJ7p5cRWBdqC+iIiSzQJjyW4drIXU6QJ+ureOGo0vBcBJsLRbUFYLt+08Rb60/d1
 zgS8L7DpKRUZlIrbD6/HxyUimJCTGERsvTSDZYCYs1+ri/YKV4a8Ukfsl8bWLbhd
 Le5PyMeusWaM6MHCIOJPys2SpsKGl9UCaVr7Nz1Lr6HIqZJUN61rNVSIcUpufiqt
 hPSYtljmz6746Z6QvNW0OD8+qE5foplCnv94Oqj9tb24gHfINPXkjiaEKhPDICi0
 6cCQj4pCsjjlzXXmn5Fp
 =sopZ
 -----END PGP SIGNATURE-----

Merge tag 'xtensa-next-20131015' of git://github.com/czankel/xtensa-linux

Pull Xtensa patchset from Chris Zankel:
 "The main patch fixes a bug that can cause a kernel panic, and was
  introduced in rc1.  The other two have been discovered by a uclibc
  test and 'coccinelle'"

* tag 'xtensa-next-20131015' of git://github.com/czankel/xtensa-linux:
  xtensa: Cocci spatch "noderef"
  xtensa: don't use alternate signal stack on threads
  xtensa: fix fast_syscall_spill_registers_fixup
2013-10-28 16:58:05 -07:00
Linus Torvalds
5d914a959d SCSI fixes on 20131028
This is a set of four patches that revert functionality introduced in the
 merge window to sg.  The locking changes turned out to introduce this bug:
 
     [  205.372901] [ BUG: lock held when returning to user space! ]
 [...]
     [  205.373285]  #0:  (&sdp->o_sem){.+.+..}, at: [<ffffffff8161e650>] sg_open+0x3a0/0x4d0
 
 The fix is large, so at this late stage we'd like to revert the functionality
 and start again in the next merge window.
 
 Signed-off-by: James Bottomley <JBottomley@Parallels.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQEcBAABAgAGBQJSbneXAAoJEDeqqVYsXL0Mr+AIAJRkPeIzyX59Y16nAlxY8tZj
 MCYFZ9v9TiVEXm2+AM/Z/Y6jVYG3wgkRzZARyOxeNeRsyWFMsm74WQG5AIopwL5B
 liN9tMlcxl3Ofdh9Ww1Os7AaIhm3xmiRTNsNirNxgh5Y3+XH8MMTv5QR97XIt5Ys
 arDJUAJKtYJIcgMbYpDdQ7vb8deNsrwC0mQ2vbdox6tMKn8wIigsyZKI/+55imJP
 uPZjruhFQxhzMzi5+kR8q/Y2hj+2Lo0pSIEWjO2K/xqLzMI/8IkCwx5gYnNdxONE
 Rrj/6VevFd0w3G9EWb8d4HhptyTMFkq4D8XoSxepSFdA1Ti4kVixwXw+PRdEU/I=
 =pSy2
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "This is a set of four patches that revert functionality introduced in
  the merge window to sg.  The locking changes turned out to introduce
  this bug:

      [  205.372901] [ BUG: lock held when returning to user space! ]
   [...]
      [  205.373285]  #0:  (&sdp->o_sem){.+.+..}, at: [<ffffffff8161e650>] sg_open+0x3a0/0x4d0

  The fix is large, so at this late stage we'd like to revert the
  functionality and start again in the next merge window"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  [SCSI] Revert "sg: use rwsem to solve race during exclusive open"
  [SCSI] Revert "sg: no need sg_open_exclusive_lock"
  [SCSI] Revert "sg: checking sdp->detached isn't protected when open"
  [SCSI] Revert "sg: push file descriptor list locking down to per-device locking"
2013-10-28 16:57:13 -07:00
Zhouyi Zhou
8e50d384cc perf tools: Fixup mmap event consumption
The tail position of the event buffer should only be modified after
actually use that event.

If not the event buffer could be invalid before use, and segment fault
occurs when invoking perf top -G.

Signed-off-by: Zhouyi Zhou <yizhouzhou@ict.ac.cn>
Cc: David Ahern <dsahern@gmail.com>
Cc: Zhouyi Zhou <yizhouzhou@ict.ac.cn>
Link: http://lkml.kernel.org/r/1382600613-32177-1-git-send-email-zhouzhouyi@gmail.com
[ Simplified the logic using exit gotos and renamed write_tail method to mmap_consume ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-28 16:06:00 -03:00
Jiri Olsa
ae779a6309 perf top: Split -G and --call-graph
Splitting -G and --call-graph for record command, so we could use '-G'
with no option.

The '-G' option now takes NO argument and enables the configured unwind
method, which is currently the frame pointers method.

It will be possible to configure unwind method via config file in
upcoming patches.

All current '-G' arguments is overtaken by --call-graph option.

NOTE: The documentation for top --call-graph option
      was wrongly copied from report command.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: David Ahern <dsahern@gmail.com>
Tested-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1382797536-32303-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-28 16:06:00 -03:00
Jiri Olsa
09b0fd45ff perf record: Split -g and --call-graph
Splitting -g and --call-graph for record command, so we could use '-g'
with no option.

The '-g' option now takes NO argument and enables the configured unwind
method, which is currently the frame pointers method.

It will be possible to configure unwind method via config file in
upcoming patches.

All current '-g' arguments is overtaken by --call-graph option.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: David Ahern <dsahern@gmail.com>
Tested-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1382797536-32303-2-git-send-email-jolsa@redhat.com
[ reordered -g/--call-graph on --help and expanded the man page
  according to comments by David Ahern and Namhyung Kim ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-28 16:05:59 -03:00
Jiri Olsa
9754c4f9b2 perf hists: Add color overhead for stdio output buffer
Following commit tightened up the buffer size for output to strict width
of used format columns:

  99cf666 perf hists: Fix formatting of long symbol names

This works fine until you hit color overhead output which places extra
bytes into output buffer. We need to account for color overhead in the
output buffer. Adding maximum color byte size to the output buffer size.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1382700293-1803-1-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-28 16:05:59 -03:00
Rob Pearce
645378d85e drm/i915: No LVDS hardware on Intel D410PT and D425KT
The Intel D410PT(LW) and D425KT Mini-ITX desktop boards both show up as
having LVDS but the hardware is not populated. This patch adds them to
the list of such systems. Patch is against 3.11.4

v2: Patch revised to match the D425KT exactly as the D425KTW does have
LVDS.  According to Intel's documentation, the D410PTL and D410PLTW
don't.

Signed-off-by: Rob Pearce <rob@flitspace.org.uk>
Cc: stable@vger.kernel.org
[danvet: Pimp commit message to my liking and add cc: stable.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-28 17:48:30 +01:00
Jani Nikula
c6cd2ee2d5 drm/i915/dp: workaround BIOS eDP bpp clamping issue
This isn't a real fix to the problem, but rather a stopgap measure while
trying to find a proper solution.

There are several laptops out there that fail to light up the eDP panel
in UEFI boot mode. They seem to be mostly IVB machines, including but
apparently not limited to Dell XPS 13, Asus TX300, Asus UX31A, Asus
UX32VD, Acer Aspire S7. They seem to work in CSM or legacy boot.

The difference between UEFI and CSM is that the BIOS provides a
different VBT to the kernel. The UEFI VBT typically specifies 18 bpp and
1.62 GHz link for eDP, while CSM VBT has 24 bpp and 2.7 GHz link. We end
up clamping to 18 bpp in UEFI mode, which we can fit in the 1.62 Ghz
link, and for reasons yet unknown fail to light up the panel.

Dithering from 24 to 18 bpp itself seems to work; if we use 18 bpp with
2.7 GHz link, the eDP panel lights up. So essentially this is a link
speed issue, and *not* a bpp clamping issue.

The bug raised its head since
commit 657445fe86
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Sat May 4 10:09:18 2013 +0200

    Revert "drm/i915: revert eDP bpp clamping code changes"

which started clamping bpp *before* computing the link requirements, and
thus affecting the required bandwidth. Clamping after the computations
kept the link at 2.7 GHz.

Even though the BIOS tells us to use 18 bpp through the VBT, it happily
boots up at 24 bpp and 2.7 GHz itself! Use this information to
selectively ignore the VBT provided value.

We can't ignore the VBT eDP bpp altogether, as there are other laptops
that do require the clamping to be used due to EDID reporting higher bpp
than the panel can support.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59841
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67950
Tested-by: Ulf Winkelvos <ulf@winkelvos.de>
Tested-by: jkp <jkp@iki.fi>
CC: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-28 17:48:30 +01:00
Ville Syrjälä
7195a50b5c drm/i915: Add HSW CRT output readout support
Call intel_ddi_get_config() to get the pipe_bpp settings from
DDI.

The sync polarity settings from DDI are irrelevant for CRT
output, so override them with data from the ADPA register.

Note: This is already merged in drm-intel-next-queued as

commit 6801c18c0a
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date:   Tue Sep 24 14:24:05 2013 +0300

    drm/i915: Add HSW CRT output readout support

but is required for the following edp bpp bugfix.

v2: Extract intel_crt_get_flags()

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=69691
Tested-by: Qingshuai Tian <qingshuai.tian@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-28 17:48:24 +01:00
Takashi Iwai
298402a385 ASoC: dapm: Return -ENOMEM in snd_soc_dapm_new_dai_widgets()
... instead of NULL dereferences.

Spotted by coverity CID 402004.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-28 09:33:10 -07:00
Takashi Iwai
ff18620c21 ASoC: dapm: Fix source list debugfs outputs
... due to a copy & paste error.

Spotted by coverity CID 710923.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org
2013-10-28 09:32:57 -07:00
Ingo Molnar
d17cccbea9 perf/urgent fixes:
. Fix up /proc/PID/maps parsing, where perfectly fine mmap entries
   were being trown away when synthesizing PERF_RECORD_MMAP for
   preexisting threads, prevenging symbol resolution to work
   for those threads, broken in the MMAP2 removal. Reported and
   pinpointed by Markus Trippelsdorf,
 
 . Fix mem leak in the python 'perf script' backend, due to missing Py_DECREFs
   on dict entries, fix from Joseph Schuchart.
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJSbnfHAAoJENZQFvNTUqpA66kQAJUcIBvn72kmZXmw5wf0eroL
 xBsgInu9rUoP1BVlaG2HVY9Sx8z9qi0bJM01UxLPypAfJD0yho4iKsnuW0u8GtMi
 Ha+F7DQsWA0aspuRUVA/39ylwV+mcuu0isNdMm85xWxYB7XK6n7fyClbhqkLP+Y1
 YPRsEN6H+/ZVveBeZkmh2+c/KQgIBYOQcZ2EtpCOv8Je3sgqNrXoPKmrgORvOVN5
 hQg6M+VdcXtcnJ/MxlmKxUxHGTwAWRkl0GNcmYhWfULsogCX948zAAfju7+jHMbj
 RbciiaZHLa1AtArEa7OU3F0HAFqPm16T3IH848vNPoaj7Y/t349f3mTt2aloKGxb
 qt8uKSDgyZ9DeHLHMqcATh5GqV7UdmntXf8nSYFhwHfcqseAlw3DNsnU+aLx1Rrx
 iFyq7K9ADcBLYUdFn0LPZiwqpvDNutC1OZZQgtqxQfc/WYIlmBSlAyXr/jCa8kD7
 HrIeVGfI23bVKnoQjTgMMlR3lkNseiiCpPWtYFXk7YFPPVFTIGHb0ex20U83Ipbf
 G4tL5CEG19FPzpC/C6NDcq9sthaDnzV2DS6hU+IUxdSgUUXaHOu4lVRUjC0ZPQ/M
 apnWtrf38dLG72oFPWrY9fe+tGs7/BMYub2FPfqwdWHBa04J2LcFtKGxSZFTDaWN
 eziDrrvFGOguKOh+KcHV
 =/kKq
 -----END PGP SIGNATURE-----

Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

* Fix up /proc/PID/maps parsing, where perfectly fine mmap entries
  were being trown away when synthesizing PERF_RECORD_MMAP for
  preexisting threads, prevenging symbol resolution to work
  for those threads, broken in the MMAP2 removal. Reported and
  pinpointed by Markus Trippelsdorf,

* Fix mem leak in the python 'perf script' backend, due to missing Py_DECREFs
  on dict entries, fix from Joseph Schuchart.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-28 15:56:50 +01:00
Arnaldo Carvalho de Melo
2fd869f08a perf tools: Fix up /proc/PID/maps parsing
When introducing support for MMAP2 we considered more parts of each map
representation in /proc/PID/maps, and when disabling it we forgot to
reduce the number of expected parsed/assigned entries in the sscanf
call, fix it to expect the right number of desired fields, 5.

Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Based-on-a-patch-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vrbo1wik997ahjzl1chm3bdm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-28 09:38:12 -03:00
Ville Syrjälä
4f56d12ebb drm/i915: Add support for pipe_bpp readout
On CTG+ read out the pipe bpp setting from hardware and fill it into
pipe config. Also check it appropriately.

v2: Don't do the pipe_bpp extraction inside the PCH only code block on
    ILK+.
    Avoid the PIPECONF read as we already have read it for the
    PIPECONF_EANBLE check.

Note: This is already in drm-intel-next-queued as
commit 42571aefaf
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date:   Fri Sep 6 23:29:00 2013 +0300

    drm/i915: Add support for pipe_bpp readout

but is needed for the following bugfix.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-28 09:34:37 +01:00
Linus Torvalds
959f58544b Linux 3.12-rc7 2013-10-27 16:12:03 -07:00
Linus Torvalds
a2ff82065b Merge branch 'parisc-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fix from Helge Deller:
 "This is a 2-line patch to save the CPU register which holds our task
  thread info pointer before calling a firmware function and then to
  restore it again afterwards.

  This is necessary because on some 64bit machines the high-order 32bits
  are being clobbered by the firmware call, and thus we failed to bring
  up secondary CPUs (and instead crashed the kernel) in some situations
  eg if we had more than 4GB RAM.  This patch fixes a bug which has been
  since ever in the parisc linux kernel and which prevented some people
  to use a 64bit kernel"

* 'parisc-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Do not crash 64bit SMP kernels on machines with >= 4GB RAM
2013-10-27 10:45:00 -07:00
Linus Torvalds
aff22d3f1a Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
 "This tree contains a clockevents regression fix for certain ARM
  subarchitectures"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clockevents: Sanitize ticks to nsec conversion
2013-10-27 10:29:25 -07:00
Linus Torvalds
e2756f5e0f Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
 "The tree contains three fixes:

   - Two tooling fixes

   - Reversal of the new 'MMAP2' extended mmap record ABI, introduced in
     this merge window.  (Patches were proposed to fix it but it was all
     a bit late and we felt it's safer to just delay the ABI one more
     kernel release and do it right)"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Disable PERF_RECORD_MMAP2 support
  perf scripting perl: Fix build error on Fedora 12
  perf probe: Fix to initialize fname always before use it
2013-10-27 10:28:35 -07:00
Linus Torvalds
1c99ca43a4 Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Ingo Molnar:
 "This tree fixes a boot crash in CONFIG_DEBUG_MUTEXES=y kernels, on
  kernels built with GCC 3.x (there are still such distros)"

Side note: it's not just a fix for old gcc versions, it's also removing
an incredibly broken/subtle check that LLVM had issues with, and that
made no sense.

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  mutex: Avoid gcc version dependent __builtin_constant_p() usage
2013-10-27 10:18:15 -07:00
Linus Torvalds
acda24c47e Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull SCSI target fixes from Nicholas Bellinger:
 "Here are the outstanding target pending fixes for v3.12-rc7.

  This includes a number of EXTENDED_COPY related fixes as a result of
  Thomas and Doug's continuing testing and feedback.

  Also included is an important vhost/scsi fix that addresses a long
  standing issue where the 'write' parameter for get_user_pages_fast()
  was incorrectly set for virtio-scsi WRITEs -> DMA_TO_DEVICE, and not
  for virtio-scsi READs -> DMA_FROM_DEVICE.

  This resulted in random userspace segfaults and other unpleasantness
  on KVM host, and unfortunately has been an issue since the initial
  merge of vhost/scsi in v3.6.  This patch is CC'ed to stable, along
  with two other less critical items"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  vhost/scsi: Fix incorrect usage of get_user_pages_fast write parameter
  target/pscsi: fix return value check
  target: Fail XCOPY for non matching source + destination block_size
  target: Generate failure for XCOPY I/O with non-zero scsi_status
  target: Add missing XCOPY I/O operation sense_buffer
  iser-target: check device before dereferencing its variable
  target: Return an error for WRITE SAME with ANCHOR==1
  target: Fix assignment of LUN in tracepoints
  target: Reject EXTENDED_COPY when emulate_3pc is disabled
  target: Allow non zero ListID in EXTENDED_COPY parameter list
  target: Make target_do_xcopy failures return INVALID_PARAMETER_LIST
2013-10-27 10:16:33 -07:00
Linus Torvalds
63e656083d Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dmaengine fixes from Vinod Koul:
 "Here is the late fixes pull request for dmaengine while you fly back
  from KS.

  We have a new dmaengine ML hosted by vger so a patch for that along
  with addition of Dave as driver mainatainer for ioat.  Other fixes are
  memeory leak fixes on edma driver, small fixes on rcar-hpbdma driver
  by Sergei"

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: edma: fix another memory leak
  dma: edma: Fix memory leak
  MAINTAINERS: add to ioatdma maintainer list
  MAINTAINERS: add the new dmaengine mailing list
2013-10-27 10:13:03 -07:00
Helge Deller
54e181e073 parisc: Do not crash 64bit SMP kernels on machines with >= 4GB RAM
Since the beginning of the parisc-linux port, sometimes 64bit SMP kernels were
not able to bring up other CPUs than the monarch CPU and instead crashed the
kernel.  The reason was unclear, esp. since it involved various machines (e.g.
J5600, J6750 and SuperDome). Testing showed, that those crashes didn't happened
when less than 4GB were installed, or if a 32bit Linux kernel was booted.

In the end, the fix for those SMP problems is trivial:
During the early phase of the initialization of the CPUs, including the monarch
CPU, the PDC_PSW firmware function to enable WIDE (=64bit) mode is called.
It's documented that this firmware function may clobber various registers, and
one one of those possibly clobbered registers is %cr30 which holds the task
thread info pointer.

Now, if %cr30 would always have been clobbered, then this bug would have been
detected much earlier. But lots of testing finally showed, that - at least for
%cr30 - on some machines only the upper 32bits of the 64bit register suddenly
turned zero after the firmware call.

So, after finding the root cause, the explanation for the various crashes
became clear:
- On 32bit SMP Linux kernels all upper 32bit were zero, so we didn't faced this
  problem.
- Monarch CPUs in 64bit mode always booted sucessfully, because the inital task
  thread info pointer was below 4GB.
- Secondary CPUs booted sucessfully on machines with less than 4GB RAM because
  the upper 32bit were zero anyay.
- Secondary CPus failed to boot if we had more than 4GB RAM and the task thread
  info pointer was located above the 4GB boundary.

Finally, the patch to fix this problem is trivial by saving the %cr30 register
before the firmware call and restoring it afterwards.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: <stable@vger.kernel.org> # 2.6.12+
Signed-off-by: Helge Deller <deller@gmx.de>
2013-10-27 15:58:44 +01:00
Linus Torvalds
20582e34c8 ACPI and power management fixes for 3.12-rc7
- Fix for rounding errors in intel_pstate causing CPU utilization to
    be underestimated from Brennan Shacklett.
 
  - intel_pstate fix to always use the correct max pstate value when
    computing the min pstate from Dirk Brandewie.
 
  - Hibernation fix for deadlocking resume in cases when the probing
    of the device containing the image is deferred from Russ Dill.
 
  - acpi-cpufreq fix to prevent the module from staying in memory
    when the driver cannot be registered and then attempting to
    unregister things that have never been registered on exit.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABCAAGBQJSatHPAAoJEILEb/54YlRxGrYP/0VplYzQX/CqDwO/folY1wiJ
 nASYG0ZhMR7wKTr75PF/9bSoTvftk+KGbx8i48DGFXsc1a8e4lCA878zu1debH0x
 +oi+qNlrRvNgwr0Eg7ALuM68zxG+b/D8vqHRqlXcnDa+rMlS/8q/l8d/D8rou49O
 pERPWLF0LI2kdRxmeOzvqo8oA1KnhUvN/nPvtFKB7LwcQU+9iY3RMAJa2i6K/zsn
 Epq76aePKz98KB6U9LZIqzshe6AQQanFr0+kz/6dHXArygVfh7+ZpByRIYcH67KK
 iR8N6O02Fq06dVLIu3Ta5Lqq5/EWBVfauLcMBTwZ2LxmZsPGUqPac02X3HpGcB3+
 1R0zWGmKpsTcs9hUGaCp9Qs2IzQvopcbnjZ6YxMkDtfZip+2FI1aaHapRT1egl8B
 xV3Yd0ZqqyAUs50tneQE9AMQ8ndae6t8gK8c3Z+EZTF0cSBuz9puQkRBGc+RdGDs
 TTaKBbgI+TY5uws6VVWEijKkQjzCsVWM+n6yW8GlRmqrpBO/yAkuw0cBB5PXnrw0
 uoSqw3+XLFrsVzeJ7V/Zi0+jpCq9qOBubO88j9EMX7tmL1xDPLECWeztAAwiFy9C
 Vwapn6qygPV5nfnMu+zDyMe/gcKcGbXmYactaLKDap0FMsRVFDY/YikN5PeJFwJF
 gLbn26BQxHcKNNUFAYr+
 =PsHF
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management fixes from
 "These fix two bugs in the intel_pstate driver, a hibernate bug leading
  to nasty resume failures sometimes and acpi-cpufreq initialization bug
  that causes problems to happen during module unload when intel_pstate
  is in use.

  Specifics:

   - Fix for rounding errors in intel_pstate causing CPU utilization to
     be underestimated from Brennan Shacklett.

   - intel_pstate fix to always use the correct max pstate value when
     computing the min pstate from Dirk Brandewie.

   - Hibernation fix for deadlocking resume in cases when the probing of
     the device containing the image is deferred from Russ Dill.

   - acpi-cpufreq fix to prevent the module from staying in memory when
     the driver cannot be registered and then attempting to unregister
     things that have never been registered on exit"

* tag 'pm+acpi-3.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  acpi-cpufreq: Fail initialization if driver cannot be registered
  PM / hibernate: Move software_resume to late_initcall_sync
  intel_pstate: Correct calculation of min pstate value
  intel_pstate: Improve accuracy by not truncating until final result
2013-10-26 04:38:47 +01:00
Takashi Iwai
1ac3293095 ALSA: hda - Fix silent headphone on Thinkpads with AD1984A codec
AD1984A codec has a couple of pins with EAPD controls, and the generic
codec driver tries to turn each of them on/off depending on the pin
active state.  However, Thinkpads seem to use EAPD of the speaker pin
as a master EAPD for controlling the mute of all outputs, including
the headphone.  This results in the dead headphone output via the
headphone plugging because it mutes the speaker and turns off EAPD.

The fix is to simply add spec->gen.keep_on_eapd flag.

[This is a regression fix on 3.12 where we moved the AD codec parser
 to the generic parser.  3.11 and earlier didn't show this problem
 because still static quirks have been used.]

Reported-and-tested-by: Vito Caputo <vcaputo@gnugeneration.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-26 00:30:32 +02:00
Takashi Iwai
b63eae0a6c ALSA: hda - Add missing initial vmaster hook at build_controls callback
The generic parser has a support of vmaster hook, but this is
initialized only in the init callback with the check of the presence
of the corresponding kctl.  However, since kctl is NULL at the very
first init callback that is called before build_controls callback, the
vmaster hook sync is skipped there.  Eventually this leads to the
uninitialized state depending on the hook implementation.

This patch adds a simple workaround, just calling the sync function
explicitly at build_controls callback.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-25 23:43:10 +02:00
Linus Torvalds
d255c59aab A few more last-minute regression fixes, prepared jointly by me and David
Woodhouse:
 
 * Revert pxa3xx to its old name to avoid breaking existing 'mtdparts=' boot
   strings.
 
 * Return GPMI NAND to its legacy ECC layout for backwards compatibility. We
   will revisit this in 3.13.
 
 A note from David on the latter fix: "This leaves a harmless cosmetic warning
 about an unused function. At this point in the cycle I really don't care."
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJSaqh8AAoJEFySrpd9RFgtMh4P/2vl/DUnDAjawWmsBs0kwTH2
 e3/gy1msBQoBNZBQ5VBSw3woIKrfEyrgr/mZWYhPR5N/h1UhWHVySbITJ5m86ABz
 hCfgLiA7hUs36qP3zmezOS/eqyiVMasRDeeudC+sVIrVItJjbIRhw54DLaKyilKx
 F6bFGXBG2bsgI0m2/ZDARL5CzgF/B/DE6uwBvbjPBxBgTB2ATql+bO8J5CQwF4i+
 VGPDfRjCClJg93G/KQBaiABvgReNhNHDAPTj2VLGOUhynZ4faAaak7jdWMHvxUqZ
 JkcnIqewCRvAxRDja9LwU4UiNRRT34e631o3kqDSu86CH8qC1ioCQ8r0F9ISPyV8
 bzw3spVmrvrm/O2NDnykX1FR+YJkIsaSqD77YAib/FxRDNRd/Ihgxd+r/EaMXJY4
 o/vXlPvEw9xa85j24p0P3t0otzTR8N4HtMYO4ggZL/iZ85iVl2qi7++Q5VjEfloR
 ePnE9w7qwXsyGmJQC0PCadW8vtye1AwzRVSCIM0hu11vZj+/26Q4IlIcH6Xn1g68
 yW7fUse6pcBEVJz+xyndNhWHXEwQBkmIIGNgUJs7stvbLPfaXEnmK52v0JWcoQZ+
 3tPVQBER7AqdCHBaRvzBw4dbK+W5SiCXfVTytTlDJnyKk6n3rmNVjAZDcyp5m7K2
 OmGq40fKzIjPcmzbkzoR
 =3NKt
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20131025' of git://git.infradead.org/linux-mtd

Pull final mtd fixes from Brian Norris:
 "A few more last-minute regression fixes, prepared jointly by me and
  David Woodhouse:

   - Revert pxa3xx to its old name to avoid breaking existing
     'mtdparts=' boot strings.

   - Return GPMI NAND to its legacy ECC layout for backwards
     compatibility.  We will revisit this in 3.13.

  A note from David on the latter fix: 'This leaves a harmless cosmetic
  warning about an unused function.  At this point in the cycle I really
  don't care.'"

* tag 'for-linus-20131025' of git://git.infradead.org/linux-mtd:
  mtd: gpmi: fix ECC regression
  mtd: nand: pxa3xx: Fix registered MTD name
2013-10-25 20:15:13 +01:00
Nicholas Bellinger
60a01f558a vhost/scsi: Fix incorrect usage of get_user_pages_fast write parameter
This patch addresses a long-standing bug where the get_user_pages_fast()
write parameter used for setting the underlying page table entry permission
bits was incorrectly set to write=1 for data_direction=DMA_TO_DEVICE, and
passed into get_user_pages_fast() via vhost_scsi_map_iov_to_sgl().

However, this parameter is intended to signal WRITEs to pinned userspace
PTEs for the virtio-scsi DMA_FROM_DEVICE -> READ payload case, and *not*
for the virtio-scsi DMA_TO_DEVICE -> WRITE payload case.

This bug would manifest itself as random process segmentation faults on
KVM host after repeated vhost starts + stops and/or with lots of vhost
endpoints + LUNs.

Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Asias He <asias@redhat.com>
Cc: <stable@vger.kernel.org> # 3.6+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-25 11:03:34 -07:00
Wei Yongjun
58932e96e4 target/pscsi: fix return value check
In case of error, the function scsi_host_lookup() returns NULL
pointer not ERR_PTR(). The IS_ERR() test in the return value check
should be replaced with NULL test.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-25 10:42:09 -07:00
Linus Torvalds
f55ac56d5e Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fixes (try two) from Al Viro:
 "nfsd performance regression fix + seq_file lseek(2) fix"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  seq_file: always update file->f_pos in seq_lseek()
  nfsd regression since delayed fput()
2013-10-25 18:16:47 +01:00
David Woodhouse
031e2777e0 mtd: gpmi: fix ECC regression
The "legacy" ECC layout used until 3.12-rc1 uses all the OOB area by
computing the ECC strength and ECC step size ourselves.

Commit 2febcdf84b ("mtd: gpmi: set the BCHs geometry with the ecc info")
makes the driver use the ECC info (ECC strength and ECC step size)
provided by the MTD code, and creates a different NAND ECC layout
for the BCH, and use the new ECC layout. This causes a regression:

   We can not mount the ubifs which was created by the old NAND ECC layout.

This patch fixes this issue by reverting to the legacy ECC layout.

We will probably introduce a new device-tree property to indicate that
the new ECC layout can be used. For now though, for the imminent 3.12
release, we just unconditionally revert to the 3.11 behaviour.

This leaves a harmless cosmetic warning about an unused function. At
this point in the cycle I really don't care.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Huang Shijie <b32955@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
Tested-by: Marek Vasut <marex@denx.de>
2013-10-25 10:09:43 -07:00
Gu Zheng
05e16745c0 seq_file: always update file->f_pos in seq_lseek()
This issue was first pointed out by Jiaxing Wang several months ago, but no
further comments:
https://lkml.org/lkml/2013/6/29/41

As we know pread() does not change f_pos, so after pread(), file->f_pos
and m->read_pos become different. And seq_lseek() does not update file->f_pos
if offset equals to m->read_pos, so after pread() and seq_lseek()(lseek to
m->read_pos), then a subsequent read may read from a wrong position, the
following program produces the problem:

    char str1[32] = { 0 };
    char str2[32] = { 0 };
    int poffset = 10;
    int count = 20;

    /*open any seq file*/
    int fd = open("/proc/modules", O_RDONLY);

    pread(fd, str1, count, poffset);
    printf("pread:%s\n", str1);

    /*seek to where m->read_pos is*/
    lseek(fd, poffset+count, SEEK_SET);

    /*supposed to read from poffset+count, but this read from position 0*/
    read(fd, str2, count);
    printf("read:%s\n", str2);

out put:
pread:
 ck_netbios_ns 12665
read:
 nf_conntrack_netbios

/proc/modules:
nf_conntrack_netbios_ns 12665 0 - Live 0xffffffffa038b000
nf_conntrack_broadcast 12589 1 nf_conntrack_netbios_ns, Live 0xffffffffa0386000

So we always update file->f_pos to offset in seq_lseek() to fix this issue.

Signed-off-by: Jiaxing Wang <hello.wjx@gmail.com>
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-10-25 10:46:40 -04:00
Rafael J. Wysocki
75c0758137 acpi-cpufreq: Fail initialization if driver cannot be registered
Make acpi_cpufreq_init() return error codes when the driver cannot be
registered so that the module doesn't stay useless in memory and so
that acpi_cpufreq_exit() doesn't attempt to unregister things that
have never been registered when the module is unloaded.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2013-10-25 16:22:47 +02:00
Linus Torvalds
4208c47199 ARM: SoC fixes for 3.12-rc
There's really only one bugfix in this branch, which is a fix for timers on
 the integrator platform. Since Linus Walleij is resurrecting support for
 the platform it seems valuable to get the fix into 3.12 even though the
 regression has been around a while.
 
 The rest are a handful of maintainers updates. If you prefer to hold those
 until 3.13 then just merge the first patch on the branch which is the fix.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSakNMAAoJEIwa5zzehBx3KscQAJPKB+kZac8rFi/n/yVrJh0P
 125QnjrkzK8jIaC3u91sJxYxro54/lH272Joz/TwLWr3ppfJRshZsDZeU164+VlF
 9kgHPKGTJU//5R07uFdI29oDVoPbaCX70KaZ31Sevk8VVGsJYasaLeO0422bp4We
 xn7WXb6XySRaV1HrwIp8/TVtwvFP2zDet6A/2G8s0tmDP0Ls3pJM1BJHfDnDN5ZY
 xkrJwRO1BwJMeHpDO5Jo7i33Wvb27ORF6x31Lrs7JL/nUdge+we/VLTwElpyyTjU
 3cqpW84Mc2HLyKy3kg8339qVxQTRvWOcXY6A1yQKH/FGL8EuBu6UjfzNsrb3aQsZ
 GzrXaM0lTLTE5dSEodnKnctllJS6u4pW6HSYnaUzAD897L7gNNny/FTYq5N7zWsj
 lssFu93m/2JMY6sc//1u08cG3nPCj3R76Q/MDtG6sWOesbHw1WgPk3YRDF6IVP5R
 FEJxEeEWp/BVAXS9Na4833rDFruyfVfUxOvXkt9sBq2tb/B2dlw7em+agWJ50fQd
 JiQTJLnCJaIu7ee7+r/XtQVtTrIBhWPpB1DlTBJs/DXU4xmKGqtih0hyJD9oNkfn
 3dmfwFruJE/qaV3Y7PEI3dbBZsLY6UrQXED4+FMqD2XaOJqV0KQC35b6nXc1BNnS
 Q8NWToYnaeFAQIfakS3s
 =7MQ0
 -----END PGP SIGNATURE-----

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "There's really only one bugfix in this branch, which is a fix for
  timers on the integrator platform.  Since Linus Walleij is
  resurrecting support for the platform it seems valuable to get the fix
  into 3.12 even though the regression has been around a while.

  The rest are a handful of maintainers updates.  If you prefer to hold
  those until 3.13 then just merge the first patch on the branch which
  is the fix"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  MAINTAINERS: Add maintainers entry for Rockchip SoCs
  MAINTAINERS: Tegra updates, and driver ownership
  MAINTAINERS: ARM: mvebu: add Sebastian Hesselbarth
  ARM: integrator: deactivate timer0 on the Integrator/CP
2013-10-25 11:49:23 +01:00
James Bottomley
065b4a2f59 [SCSI] Revert "sg: use rwsem to solve race during exclusive open"
This reverts commit 15b06f9a02.

This is one of four patches that was causing this bug

[  205.372823] ================================================
[  205.372901] [ BUG: lock held when returning to user space! ]
[  205.372979] 3.12.0-rc6-hw-debug-pagealloc+ #67 Not tainted
[  205.373055] ------------------------------------------------
[  205.373132] megarc.bin/5283 is leaving the kernel with locks still held!
[  205.373212] 1 lock held by megarc.bin/5283:
[  205.373285]  #0:  (&sdp->o_sem){.+.+..}, at: [<ffffffff8161e650>] sg_open+0x3a0/0x4d0

Cc: Vaughan Cao <vaughan.cao@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25 10:59:54 +01:00
James Bottomley
98481ff0bb [SCSI] Revert "sg: no need sg_open_exclusive_lock"
This reverts commit 00b2d9d6d0.

This is one of four patches that was causing this bug

[  205.372823] ================================================
[  205.372901] [ BUG: lock held when returning to user space! ]
[  205.372979] 3.12.0-rc6-hw-debug-pagealloc+ #67 Not tainted
[  205.373055] ------------------------------------------------
[  205.373132] megarc.bin/5283 is leaving the kernel with locks still held!
[  205.373212] 1 lock held by megarc.bin/5283:
[  205.373285]  #0:  (&sdp->o_sem){.+.+..}, at: [<ffffffff8161e650>] sg_open+0x3a0/0x4d0

Cc: Vaughan Cao <vaughan.cao@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25 10:59:32 +01:00
James Bottomley
bafc8ad82d [SCSI] Revert "sg: checking sdp->detached isn't protected when open"
This reverts commit e32c9e6300.

This is one of four patches that was causing this bug

[  205.372823] ================================================
[  205.372901] [ BUG: lock held when returning to user space! ]
[  205.372979] 3.12.0-rc6-hw-debug-pagealloc+ #67 Not tainted
[  205.373055] ------------------------------------------------
[  205.373132] megarc.bin/5283 is leaving the kernel with locks still held!
[  205.373212] 1 lock held by megarc.bin/5283:
[  205.373285]  #0:  (&sdp->o_sem){.+.+..}, at: [<ffffffff8161e650>] sg_open+0x3a0/0x4d0

Cc: Vaughan Cao <vaughan.cao@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25 10:59:02 +01:00
James Bottomley
c0d3b9c29e [SCSI] Revert "sg: push file descriptor list locking down to per-device locking"
This reverts commit 1f962ebcdf.

This is one of four patches that was causing this bug

[  205.372823] ================================================
[  205.372901] [ BUG: lock held when returning to user space! ]
[  205.372979] 3.12.0-rc6-hw-debug-pagealloc+ #67 Not tainted
[  205.373055] ------------------------------------------------
[  205.373132] megarc.bin/5283 is leaving the kernel with locks still held!
[  205.373212] 1 lock held by megarc.bin/5283:
[  205.373285]  #0:  (&sdp->o_sem){.+.+..}, at: [<ffffffff8161e650>] sg_open+0x3a0/0x4d0

Cc: Vaughan Cao <vaughan.cao@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25 10:58:07 +01:00
Linus Torvalds
88829dfe4b Two important fixes
- Fix long standing memory leak in the (rarely used) public key support
 - Fix large file corruption on 32 bit architectures
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABCgAGBQJSaX/HAAoJENaSAD2qAscKdpQQAI6Rvsv5y/Gj+8/9rCUnNYhw
 8YWYkOko2+cyGl6ro+nIm2nmKOuaGrjijvubOjOAe4WkMzS0EyJjku/9NT3S6KzC
 SqHC0ZeZf0jaFC9zUkUN69RY9m96Ak94HAagXO3Qm39DCSj8xijxODOVnVzkEs2x
 ylOU8OgRbD/AIDzmLxgHaOtuAmQ0GNvbVoYK6ZErVmOMENU2/67iH3OsyGD4OFpr
 Oaq1i8m7rxPmwv3QNSGhXSK6EScqs2jgM4aPWx3aG+OhYv6sGWkL8jJgPS/uSUBc
 ttD1Ou/d9yyvZPDFd9wmiHhenbCVbEdl6JAIS8zKv4NkSQ3V7AVWwAoe6JMfbREo
 U+Om7FwGLgKlZ/19+IxBMGTITuOjUkKq97vJMiYbXuWzdrZSflv5GiGGKbxchmnA
 CnfYaN1HYVcpLsbXoDTBomML7VTtbifgmY0diUJ2aJ1eTg86Gs1DXjhnuLF70Jjd
 dfuYfOKkJguuRfZ50yrpWfEQ0iOudXI1v+PrramLof33lNKWI8XeKjgDxyUrAjOZ
 UjFT639EXIRzYDIOCPZicQKdNO3BRziKi1cSnXQQp9cNTMs6/FIxK2zrQmjgqvww
 Hwj+M6czLs45lbfjQIxi3FlEAYYdXBQwrEiAu4cmt9j1bxIZnwIa7Fu0bXSxphfD
 dUo0GN7CkF45BkNvotFX
 =74EV
 -----END PGP SIGNATURE-----

Merge tag 'ecryptfs-3.12-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs

Pull ecryptfs fixes from Tyler Hicks:
 "Two important fixes
   - Fix long standing memory leak in the (rarely used) public key
     support
   - Fix large file corruption on 32 bit architectures"

* tag 'ecryptfs-3.12-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
  eCryptfs: fix 32 bit corruption issue
  ecryptfs: Fix memory leakage in keystore.c
2013-10-25 07:32:01 +01:00
Russ Dill
d3c345dbc7 PM / hibernate: Move software_resume to late_initcall_sync
software_resume is being called after deferred_probe_initcall in
drivers base. If the probing of the device that contains the resume
image is deferred, and the system has been instructed to wait for
it to show up, this wait will occur in software_resume. This causes
a deadlock.

Move software_resume into late_initcall_sync so that it happens
after all the other late_initcalls.

Signed-off-by: Russ Dill <Russ.Dill@ti.com>
Acked-by: Pavel Machek <Pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-25 01:58:49 +02:00
Ezequiel Garcia
18a84e935e mtd: nand: pxa3xx: Fix registered MTD name
In a recent commit:

  commit f455578dd9
  Author: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
  Date:   Mon Aug 12 14:14:53 2013 -0300

  mtd: nand: pxa3xx: Remove hardcoded mtd name

  There's no advantage in using a hardcoded name for the mtd device.
  Instead use the provided by the platform_device.

The MTD name was changed to use the one provided by the platform_device.
However, this can be problematic as some users want to set partitions
using the kernel parameter 'mtdparts', where the name is needed.

Therefore, to avoid regressions in users relying in 'mtdparts' we revert
the change and use the previous one 'pxa3xx_nand-0'.

While at it, let's put a big comment and prevent this change from happening
ever again.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-10-24 14:44:28 -07:00
Colin Ian King
43b7c6c6a4 eCryptfs: fix 32 bit corruption issue
Shifting page->index on 32 bit systems was overflowing, causing
data corruption of > 4GB files. Fix this by casting it first.

https://launchpad.net/bugs/1243636

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reported-by: Lars Duesing <lars.duesing@camelotsweb.de>
Cc: stable@vger.kernel.org # v3.11+
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
2013-10-24 12:36:30 -07:00
Vinod Koul
7261828776 dmaengine: edma: fix another memory leak
commit 4b6271a6 fix a menory leak but one more existed in driver so fix that

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-24 22:17:50 +05:30