Commit graph

91 commits

Author SHA1 Message Date
Linus Torvalds
0191b625ca Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1429 commits)
  net: Allow dependancies of FDDI & Tokenring to be modular.
  igb: Fix build warning when DCA is disabled.
  net: Fix warning fallout from recent NAPI interface changes.
  gro: Fix potential use after free
  sfc: If AN is enabled, always read speed/duplex from the AN advertising bits
  sfc: When disabling the NIC, close the device rather than unregistering it
  sfc: SFT9001: Add cable diagnostics
  sfc: Add support for multiple PHY self-tests
  sfc: Merge top-level functions for self-tests
  sfc: Clean up PHY mode management in loopback self-test
  sfc: Fix unreliable link detection in some loopback modes
  sfc: Generate unique names for per-NIC workqueues
  802.3ad: use standard ethhdr instead of ad_header
  802.3ad: generalize out mac address initializer
  802.3ad: initialize ports LACPDU from const initializer
  802.3ad: remove typedef around ad_system
  802.3ad: turn ports is_individual into a bool
  802.3ad: turn ports is_enabled into a bool
  802.3ad: make ntt bool
  ixgbe: Fix set_ringparam in ixgbe to use the same memory pools.
  ...

Fixed trivial IPv4/6 address printing conflicts in fs/cifs/connect.c due
to the conversion to %pI (in this networking merge) and the addition of
doing IPv6 addresses (from the earlier merge of CIFS).
2008-12-28 12:49:40 -08:00
Qinghuang Feng
cf005b1d0e net: remove redundant argument comments
Remove redundant argument comments in files of net/*

Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-21 17:15:03 -08:00
James Morris
f3a5c54701 Merge branch 'master' into next
Conflicts:
	fs/cifs/misc.c

Merge to resolve above, per the patch below.

Signed-off-by: James Morris <jmorris@namei.org>

diff --cc fs/cifs/misc.c
index ec36410,addd1dc..0000000
--- a/fs/cifs/misc.c
+++ b/fs/cifs/misc.c
@@@ -347,13 -338,13 +338,13 @@@ header_assemble(struct smb_hdr *buffer
  		/*  BB Add support for establishing new tCon and SMB Session  */
  		/*      with userid/password pairs found on the smb session   */
  		/*	for other target tcp/ip addresses 		BB    */
 -				if (current->fsuid != treeCon->ses->linux_uid) {
 +				if (current_fsuid() != treeCon->ses->linux_uid) {
  					cFYI(1, ("Multiuser mode and UID "
  						 "did not match tcon uid"));
- 					read_lock(&GlobalSMBSeslock);
- 					list_for_each(temp_item, &GlobalSMBSessionList) {
- 						ses = list_entry(temp_item, struct cifsSesInfo, cifsSessionList);
+ 					read_lock(&cifs_tcp_ses_lock);
+ 					list_for_each(temp_item, &treeCon->ses->server->smb_ses_list) {
+ 						ses = list_entry(temp_item, struct cifsSesInfo, smb_ses_list);
 -						if (ses->linux_uid == current->fsuid) {
 +						if (ses->linux_uid == current_fsuid()) {
  							if (ses->server == treeCon->ses->server) {
  								cFYI(1, ("found matching uid substitute right smb_uid"));
  								buffer->Uid = ses->Suid;
2008-11-18 18:52:37 +11:00
Randy Dunlap
4ff429e658 9p: restrict RDMA usage
linux-next:

Make 9p's RDMA option depend on INET since it uses Infiniband rdma_*
functions and that code depends on INET.  Otherwise 9p can try to
use symbols which don't exist.

ERROR: "rdma_destroy_id" [net/9p/9pnet_rdma.ko] undefined!
ERROR: "rdma_connect" [net/9p/9pnet_rdma.ko] undefined!
ERROR: "rdma_create_id" [net/9p/9pnet_rdma.ko] undefined!
ERROR: "rdma_create_qp" [net/9p/9pnet_rdma.ko] undefined!
ERROR: "rdma_resolve_route" [net/9p/9pnet_rdma.ko] undefined!
ERROR: "rdma_disconnect" [net/9p/9pnet_rdma.ko] undefined!
ERROR: "rdma_resolve_addr" [net/9p/9pnet_rdma.ko] undefined!

I used an if/endif block so that the menu items would remain
presented together.

Also correct an article adjective.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-11-14 16:14:27 -06:00
James Morris
2b82892565 Merge branch 'master' into next
Conflicts:
	security/keys/internal.h
	security/keys/process_keys.c
	security/keys/request_key.c

Fixed conflicts above by using the non 'tsk' versions.

Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 11:29:12 +11:00
David Howells
f8b9d53a31 CRED: Wrap task credential accesses in 9P2000 filesystem
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.

Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().

Change some task->e?[ug]id to task_e?[ug]id().  In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Reviewed-by: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Cc: v9fs-developer@lists.sourceforge.net
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:38:44 +11:00
Randy Dunlap
b0d5fdef52 net/9p: fix printk format warnings
Fix printk format warnings in net/9p.
Built cleanly on 7 arches.

net/9p/client.c:820: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64'
net/9p/client.c:820: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64'
net/9p/client.c:867: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64'
net/9p/client.c:867: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64'
net/9p/client.c:932: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64'
net/9p/client.c:932: warning: format '%llx' expects type 'long long unsigned int', but argument 6 has type 'u64'
net/9p/client.c:982: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64'
net/9p/client.c:982: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64'
net/9p/client.c:1025: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64'
net/9p/client.c:1025: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64'
net/9p/client.c:1227: warning: format '%llx' expects type 'long long unsigned int', but argument 7 has type 'u64'
net/9p/client.c:1227: warning: format '%llx' expects type 'long long unsigned int', but argument 12 has type 'u64'
net/9p/client.c:1227: warning: format '%llx' expects type 'long long unsigned int', but argument 8 has type 'u64'
net/9p/client.c:1227: warning: format '%llx' expects type 'long long unsigned int', but argument 13 has type 'u64'
net/9p/client.c:1252: warning: format '%llx' expects type 'long long unsigned int', but argument 7 has type 'u64'
net/9p/client.c:1252: warning: format '%llx' expects type 'long long unsigned int', but argument 12 has type 'u64'
net/9p/client.c:1252: warning: format '%llx' expects type 'long long unsigned int', but argument 8 has type 'u64'
net/9p/client.c:1252: warning: format '%llx' expects type 'long long unsigned int', but argument 13 has type 'u64'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-11-05 13:19:07 -06:00
Roel Kluin
9f3e9bbe62 unsigned fid->fid cannot be negative
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-11-05 13:19:07 -06:00
Huang Weiyi
1558c62149 9p: rdma: remove duplicated #include
Removed duplicated #include <rdma/ib_verbs.h> in
net/9p/trans_rdma.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-11-05 13:19:07 -06:00
Tom Tucker
45abdf1c7b p9: Fix leak of waitqueue in request allocation path
If a T or R fcall cannot be allocated, the function returns an error
but neglects to free the wait queue that was successfully allocated.

If it comes through again a second time this wq will be overwritten
with a new allocation and the old allocation will be leaked.

Also, if the client is subsequently closed, the close path will
attempt to clean up these allocations, so set the req fields to
NULL to avoid duplicate free.

Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-11-05 13:19:06 -06:00
Tom Tucker
82b189eaaf 9p: Remove unneeded free of fcall for Flush
T and R fcall are reused until the client is destroyed. There does
not need to be a special case for Flush

Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-11-05 13:19:06 -06:00
Tom Tucker
cac23d6505 9p: Make all client spin locks IRQ safe
The client lock must be IRQ safe. Some of the lock acquisition paths
took regular spin locks.

Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-11-05 13:19:06 -06:00
Tom Tucker
517ac45af4 9p: rdma: Set trans prior to requesting async connection ops
The RDMA connection manager is fundamentally asynchronous.
Since the async callback context is the client pointer, the
transport in the client struct needs to be set prior to calling
the first async op.

Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-11-05 13:19:06 -06:00
Eric Van Hensbergen
e45c5405e1 9p: fix sparse warnings
Several sparse warnings were introduced by patches accepted during the merge
window which weren't caught.  This patch fixes those warnings.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-22 18:54:47 -05:00
Tom Tucker
fc79d4b104 9p: rdma: RDMA Transport Support for 9P
This patch implements the RDMA transport provider for 9P. It allows
mounts to be performed over iWARP and IB capable network interfaces.

Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: Latchesar Ionkov <lionkov@lanl.gov>
2008-10-22 18:47:39 -05:00
Eric Van Hensbergen
0b15a3a528 9p: fix debug build error
Fixes build problem with 9p when building with debug disabled.
Also contains some fixes for warnings which pop up when 
CONFIG_NET_9P_DEBUG is disabled.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-22 18:47:40 -05:00
Eric Van Hensbergen
7eb923b80c 9p: add more conservative locking
During the reorganization some of the multi-theaded locking assumptions were
accidently relaxed.  This patch moves us back towards a more conservative 
locking strategy.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-17 12:45:40 -05:00
Eric Van Hensbergen
f0a0ac2ee5 9p: fix oops in protocol stat parsing error path.
When we get an error on parsing a stat due to a protocol bug, 
we can generate an oops during cleanup because we didn't 
initialize the string pointers in the stat structure.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-17 12:45:23 -05:00
Eric Van Hensbergen
e7f4b8f1a5 9p: Improve debug support
The new debug support lacks some of the information that the previous fcprint
code provided -- this patch focuses on better presentation of debug data along
with more helpful debug along error paths.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-17 16:20:07 -05:00
Eric Van Hensbergen
02da398b95 9p: eliminate depricated conv functions
Remove depricated conv functions which have been replaced with new 
protocol routines.

This patch also reworks the one instance of the file-system code which
directly calls conversion routines (to accomplish unpacking dirreads).

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-17 11:06:57 -05:00
Eric Van Hensbergen
51a87c552d 9p: rework client code to use new protocol support functions
Now that the new protocol functions are in place, this patch switches
the client code to using the new support code.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-17 11:04:45 -05:00
Eric Van Hensbergen
cb198131b0 9p: remove unnecessary tag field from p9_req_t structure
This removes the vestigial tag field from the p9_req_t structure.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-17 11:04:45 -05:00
Eric Van Hensbergen
51d71f9f7a 9p: remove 9p fcall debug prints
One of the current debug options allows users to get a verbose dump of fcalls.
This isn't really necessary as correctly parsed protocol frames can be printed
as part of the code in the client functions.  The consolidated printfcalls
structure would require new entries to be added for every extension.  This
patch removes the debug print methods and their use.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-17 11:04:44 -05:00
Eric Van Hensbergen
ace51c4dd2 9p: add new protocol support code
This adds a new protocol processing support code based on Anthony Liguori's
9p library code.  This code performs protocol marshalling/unmarshalling using
printf like strings to represent protocol elements.  It is my intent to use
them to replace the current functions in conv.c as well as the 
p9_create_* functions.

This should make the client implementation much more clear, and also make it
much easier to add new protocol extensions by limiting the number of places
in which changes need to be made.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-17 11:04:44 -05:00
Eric Van Hensbergen
6936bf60d2 9p: encapsulate version function
Alsmot all 9P client wire functions have their own (set of) functions.
Tversion is an exception as its encapsulated into the client_create code.

This patch moves the protocol specifics of this to a function to match the
rest of the code.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-17 11:04:43 -05:00
Eric Van Hensbergen
06b55b464e 9p: move dirread to fs layer
Currently reading a directory is implemented in the client code.
This function is not actually a wire operation, but a meta operation 
which calls read operations and processes the results.

This patch moves this functionality to the fs layer and calls component
wire operations instead of constructing their packets.  This provides a 
cleaner separation and will help when we reorganize the client functions
and protocol processing methods.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-17 11:04:43 -05:00
Eric Van Hensbergen
fbedadc16e 9p: move readn meta-function from client to fs layer
There are a couple of methods in the client code which aren't actually
wire operations.  To keep things organized cleaner, these operations are
being moved to the fs layer.

This patch moves the readn meta-function (which executes multiple wire
reads until a buffer is full) to the fs layer.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-17 11:04:43 -05:00
Eric Van Hensbergen
0fc9655ec6 9p: consolidate read/write functions
Currently there are two separate versions of read and write.  One for
dealing with user buffers and the other for dealing with kernel buffers.
There is a tremendous amount of code duplication in the otherwise
identical versions of these functions.  This patch adds an additional
user buffer parameter to read and write and conditionalizes handling of
the buffer on whether the kernel buffer or the user buffer is populated.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-17 11:04:42 -05:00
Tejun Heo
95820a3651 9p: drop broken unused error path from p9_conn_create()
Post p9_fd_poll() error path which checks m->poll_waddr[i] for PTR_ERR
value has the following problems.

* It's completely unused.  Error value is set iff NULL @wait_address
  has been specified to p9_pollwait() which is guaranteed not to
  happen.

* It dereferences @m after deallocating it (introduced by 571ffeaf and
  spotted by Raja R Harinath.

* It returned the wrong value on error.  It should return
  poll_waddr[i] but it returnes poll_waddr (introduced by 571ffeaf).

* p9_mux_poll_stop() doesn't handle PTR_ERR value.  It will try to
  operate on the PTR_ERR value as if it's a normal pointer and cause
  oops.

As the error path is bogus in the first place, there's no reason to
hold onto it.  Kill it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Raja R Harinath <harinath@hurrynot.org>
2008-10-17 11:04:42 -05:00
Eric Van Hensbergen
91b8534fa8 9p: make rpc code common and rework flush code
This code moves the rpc function to the common client base,
reorganizes the flush code to be more simple and stable, and
makes the necessary adjustments to the underlying transports
to adapt to the new structure.

This reduces the overall amount of code duplication between the
transports and should make adding new transports more straightforward.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-17 11:04:42 -05:00
Eric Van Hensbergen
1b0a763bdd 9p: use the rcall structure passed in the request in trans_fd read_work
This patch reworks the read_work function to enable it to directly use a passed
in rcall structure.  This should help allow us to remove unnecessary copies
in the future.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-17 11:04:42 -05:00
Eric Van Hensbergen
673d62cdaa 9p: apply common request code to trans_fd
Apply the now common p9_req_t structure to the fd transport.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-17 11:04:42 -05:00
Eric Van Hensbergen
ff683452f7 9p: apply common tagpool handling to trans_fd
Simplify trans_fd by using new common client tagpool structure.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-17 11:04:42 -05:00
Eric Van Hensbergen
fea511a644 9p: move request management to client code
The virtio transport uses a simplified request management system
that I want to use for all transports.  This patch adapts and moves the
exisiting code for managing requests to the client common code.
Later patches will apply these mechanisms to the other transports.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-17 11:04:42 -05:00
Eric Van Hensbergen
044c776884 9p: eliminate callback complexity
The current trans_fd rpc mechanisms use a dynamic callback mechanism which
introduces a lot of complexity which only accomodates a single special case.
This patch removes much of that complexity in favor of a simple exception
mechanism to deal with flushes.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-17 11:04:41 -05:00
Eric Van Hensbergen
21c003687e 9p: consolidate mux_rpc and request structure
Currently, trans_fd has two structures (p9_req and p9_mux-rpc)
which contain mostly duplicate data.

This patch consolidates these two structures and removes p9_mux_rpc.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-17 11:04:41 -05:00
Eric Van Hensbergen
5503ac5659 9p: remove unnecessary prototypes
Cleanup files by reordering functions in order to remove need for
unnecessary function prototypes.

There are no code changes here, just functions being moved around and
prototypes being eliminated.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-17 11:04:41 -05:00
Eric Van Hensbergen
bead27f0a8 9p: remove duplicate client state
Now that we are passing client state into the transport modules, remove
duplicate state which is present in transport private structures.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-17 11:04:41 -05:00
Eric Van Hensbergen
8b81ef589a 9p: consolidate transport structure
Right now there is a transport module structure which provides per-transport
type functions and data and a transport structure which contains per-instance
public data as well as function pointers to instance specific functions.

This patch moves public transport visible instance data to the client
structure (which in some cases had duplicate data) and consolidates the
functions into the transport module structure.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-17 11:04:41 -05:00
Tejun Heo
992b3f1dbe 9p-trans_fd: use single poller
trans_fd used pool of upto 100 pollers to monitor the r/w fds.  The
approach makes sense in userspace back when the only available
interfaces were poll(2) and select(2).  As each event monitor -
trigger - handling iteration took O(n) where `n' is the number of
watched fds, it makes sense to spread them to many pollers such that
the `n' can be divided by the number of pollers.  However, this
doesn't make any sense in kernel because persistent edge triggered
event monitoring is how the whole thing is implemented in the kernel
in the first place.

This patch converts trans_fd to use single poller which watches all
the fds instead of the poll of pollers approach.  All the fds are
registered for monitoring on creation and only the fds with pending
events are scanned when something happens much like how epoll is
implemented.

This change makes trans_fd fd monitoring more efficient and simpler.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-10-17 11:04:41 -05:00
Steven Whitehouse
a447c09324 vfs: Use const for kernel parser table
This is a much better version of a previous patch to make the parser
tables constant. Rather than changing the typedef, we put the "const" in
all the various places where its required, allowing the __initconst
exception for nfsroot which was the cause of the previous trouble.

This was posted for review some time ago and I believe its been in -mm
since then.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Alexander Viro <aviro@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13 10:10:37 -07:00
Eric Van Hensbergen
16ec470012 9p: fix put_data error handling
Abhishek Kulkarni pointed out an inconsistency in the way
errors are returned from p9_put_data.  On deeper exploration it
seems the error handling for this path was completely wrong.
This patch adds checks for allocation problems and propagates
errors correctly.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-09-24 16:22:22 -05:00
Julia Lawall
620678244b 9p: introduce missing kfree
Error handling code following a kmalloc should free the allocated data.

The semantic match that finds the problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,l;
position p1,p2;
expression *ptr != NULL;
@@

(
if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S
|
x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
)
<... when != x
     when != if (...) { <+...x...+> }
x->f = E
...>
(
 return \(0\|<+...x...+>\|ptr\);
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-09-24 16:22:22 -05:00
Tejun Heo
206ca50de7 9p-trans_fd: fix and clean up module init/exit paths
trans_fd leaked p9_mux_wq on module unload.  Fix it.  While at it,
collapse p9_mux_global_init() into p9_trans_fd_init().  It's easier to
follow this way and the global poll_tasks array is about to removed
anyway.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-09-24 16:22:23 -05:00
Tejun Heo
ec3c68f232 9p-trans_fd: don't do fs segment mangling in p9_fd_poll()
p9_fd_poll() is never called with user pointers and f_op->poll()
doesn't expect its arguments to be from userland.  There's no need to
set kernel ds before calling f_op->poll() from p9_fd_poll().  Remove
it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-09-24 16:22:23 -05:00
Tejun Heo
571ffeafff 9p-trans_fd: clean up p9_conn_create()
* Use kzalloc() to allocate p9_conn and remove 0/NULL initializations.

* Clean up error return paths.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-09-24 16:22:23 -05:00
Tejun Heo
7dc5d24be0 9p-trans_fd: fix trans_fd::p9_conn_destroy()
p9_conn_destroy() first kills all current requests by calling
p9_conn_cancel(), then waits for the request list to be cleared by
waiting on p9_conn->equeue.  After that, polling is stopped and the
trans is destroyed.  This sequence has a few problems.

* Read and write works were never cancelled and the p9_conn can be
  destroyed while the works are running as r/w works remove requests
  from the list and dereference the p9_conn from them.

* The list emptiness wait using p9_conn->equeue wouldn't trigger
  because p9_conn_cancel() always clears all the lists and the only
  way the wait can be triggered is to have another task to issue a
  request between the slim window between p9_conn_cancel() and the
  wait, which isn't safe under the current implementation with or
  without the wait.

This patch fixes the problem by first stopping poll, which can
schedule r/w works, first and cancle r/w works which guarantees that
r/w works are not and will not run from that point and then calling
p9_conn_cancel() and do the rest of destruction.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-09-24 16:22:23 -05:00
Tejun Heo
72029fe85d 9p: implement proper trans module refcounting and unregistration
9p trans modules aren't refcounted nor were they unregistered
properly.  Fix it.

* Add 9p_trans_module->owner and reference the module on each trans
  instance creation and put it on destruction.

* Protect v9fs_trans_list with a spinlock.  This isn't strictly
  necessary as the list is manipulated only during module loading /
  unloading but it's a good idea to make the API safe.

* Unregister trans modules when the corresponding module is being
  unloaded.

* While at it, kill unnecessary EXPORT_SYMBOL on p9_trans_fd_init().

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-09-24 16:22:23 -05:00
Ulrich Drepper
a677a039be flag parameters: socket and socketpair
This patch adds support for flag values which are ORed to the type passwd
to socket and socketpair.  The additional code is minimal.  The flag
values in this implementation can and must match the O_* flags.  This
avoids overhead in the conversion.

The internal functions sock_alloc_fd and sock_map_fd get a new parameters
and all callers are changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>
#include <netinet/in.h>
#include <sys/socket.h>

#define PORT 57392

/* For Linux these must be the same.  */
#define SOCK_CLOEXEC O_CLOEXEC

int
main (void)
{
  int fd;
  fd = socket (PF_INET, SOCK_STREAM, 0);
  if (fd == -1)
    {
      puts ("socket(0) failed");
      return 1;
    }
  int coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if (coe & FD_CLOEXEC)
    {
      puts ("socket(0) set close-on-exec flag");
      return 1;
    }
  close (fd);

  fd = socket (PF_INET, SOCK_STREAM|SOCK_CLOEXEC, 0);
  if (fd == -1)
    {
      puts ("socket(SOCK_CLOEXEC) failed");
      return 1;
    }
  coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if ((coe & FD_CLOEXEC) == 0)
    {
      puts ("socket(SOCK_CLOEXEC) does not set close-on-exec flag");
      return 1;
    }
  close (fd);

  int fds[2];
  if (socketpair (PF_UNIX, SOCK_STREAM, 0, fds) == -1)
    {
      puts ("socketpair(0) failed");
      return 1;
    }
  for (int i = 0; i < 2; ++i)
    {
      coe = fcntl (fds[i], F_GETFD);
      if (coe == -1)
        {
          puts ("fcntl failed");
          return 1;
        }
      if (coe & FD_CLOEXEC)
        {
          printf ("socketpair(0) set close-on-exec flag for fds[%d]\n", i);
          return 1;
        }
      close (fds[i]);
    }

  if (socketpair (PF_UNIX, SOCK_STREAM|SOCK_CLOEXEC, 0, fds) == -1)
    {
      puts ("socketpair(SOCK_CLOEXEC) failed");
      return 1;
    }
  for (int i = 0; i < 2; ++i)
    {
      coe = fcntl (fds[i], F_GETFD);
      if (coe == -1)
        {
          puts ("fcntl failed");
          return 1;
        }
      if ((coe & FD_CLOEXEC) == 0)
        {
          printf ("socketpair(SOCK_CLOEXEC) does not set close-on-exec flag for fds[%d]\n", i);
          return 1;
        }
      close (fds[i]);
    }

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:27 -07:00
Eric Van Hensbergen
887b3ece65 9p: fix error path during early mount
There was some cleanup issues during early mount which would trigger
a kernel bug for certain types of failure.  This patch reorganizes the
cleanup to get rid of the bad behavior.

This also merges the 9pnet and 9pnet_fd modules for the purpose of
configuration and initialization.  Keeping the fd transport separate
from the core 9pnet code seemed like a good idea at the time, but in
practice has caused more harm and confusion than good.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-05-14 19:23:27 -05:00