Commit Graph

30 Commits

Author SHA1 Message Date
NeilBrown baa3477f06 staging: mt7621-dts: add support for second network interface
The mt7621 has two network interfaces, one that connects to an
internal switch, and one that can connect to either that switch
or an external phy, or possibly an internal phy.

The Gnubee-PC2 has an external phy for use with the second interface.

This patch add some support for the second interface to mt7621.dtsi
and add a gbpc2.dts which makes use of this.  This allows the second
interface to be used.

I don't fully understand how to configure this interface - the
documentation is thin - so there could well be room for improvement
here.

Signed-off-by: NeilBrown <neil@brown.name>
Link: https://lore.kernel.org/r/156194178766.1430.12784163026696670896.stgit@noble.brown
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03 18:28:29 +02:00
NeilBrown cf8e49ae20 staging: mt7621-dts: update sdhci config.
The mtk-sd driver has been updated to support
the IP in the mt7621, so update our configuration
to work with it.

Signed-off-by: NeilBrown <neil@brown.name>
Link: https://lore.kernel.org/r/156194178761.1430.1625105851941268306.stgit@noble.brown
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03 18:28:29 +02:00
Sergio Paracuellos fd69d7faae staging: mt7621-dts: add gpio perst to pcie bindings node
Driver has been changed to use perts gpio reset instead of
perst builtin behaviour. Update device tree accordly.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-20 14:45:50 +02:00
Geert Uytterhoeven 0c20037c67 staging: Add missing newline at end of file
"git diff" says:

    \ No newline at end of file

after modifying the files.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-18 08:59:40 +02:00
Greg Kroah-Hartman 97ed8eab2a staging: add missing SPDX lines to Makefile files
There are a few remaining drivers/staging/*/Makefile files that do not
have SPDX identifiers in them.  Add the correct GPL-2.0 identifier to
them to make scanning tools happy.

Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-03 11:10:15 +02:00
Greg Kroah-Hartman 99b75a4e32 staging: add missing SPDX lines to Kconfig files
There are a few remaining drivers/staging/*/Kconfig files that do not
have SPDX identifiers in them.  Add the correct GPL-2.0 identifier to
them to make scanning tools happy.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-03 11:10:15 +02:00
Sergio Paracuellos 7d304e1cdf staging: mt7621-dts: simplify pcie phy bindings
If each phy port doesn't have its own resources, then we don't need
child nodes. Handle it using #phy-cells to 1 for both phy's.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-29 17:22:54 +01:00
NeilBrown ef2719d35a staging: mt7621-dts: update ethernet settings.
The ethernet in mt7621 is now supported by
 drivers/net/ethernet/mediatek/

which provides support for the integrated switch through DSA.

This requires some devicetree changes, and particularly allows
a board dts to identify which switch ports are present.

The second CPU interface - gmac1 - doesn't work yet, so the device
tree information may not be correct.  The phy (which is present on the
gnubee-pc2) can negotiate and report connection speed etc, but no
traffic flows.

The gnubee-pc1 has two network ports which are 'black' and 'blue'.
There are connected to switch ports 0 and 4 respectively.

Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-18 07:05:24 +01:00
Sergio Paracuellos cdd8814491 staging: mt7621-dts: add general pcie reset line to pcie bindings
Add general pci reset line to pcie bindings to use reset_control properly
in driver code.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19 11:13:08 +01:00
Sergio Paracuellos ca87a3bf73 staging: mt7621-dts: fix pci phy register addresses
Both pci-phy0 and pci-phy1 are using bad addresses to search
for its registers. Use proper register values.

Fixes: 06184ba5a33a: staging: mt7621-dts: add pci-phy related bindings to board's device tree
Reported-by: NeilBrown <neil@brown.name>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19 11:12:08 +01:00
Sergio Paracuellos 06184ba5a3 staging: mt7621-dts: add pci-phy related bindings to board's device tree
New driver for pci phy has been added, as well as. pci driver has been
changed to use kernel's generic PHY API. Add related PCI PHY bindings
accordly.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-07 11:28:14 +01:00
Sergio Paracuellos bd7c95d488 staging: mt7621-dts: use standard 'groups' instead of 'group' for pinctrl bindings
Pinctrl generic functions looks for standard property 'groups' in DT to get
data and use in the driver. Change all of them.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-07 11:28:13 +01:00
NeilBrown 99c22707ef staging: mt7621-dts: avoid warnings in pinctrl definitions
The device-tree checking code sees node names  "i2c" and "spi" in the
pinctrl definition and thinks these are defining i2c or spi devices,
and complains that they look wrong.

So add a '0' to the end of each name (much like "uart" and "rgmii"
have numbers at the end) to avoid the warning.

Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-12 11:55:39 +01:00
NeilBrown 90dedc973b staging: mt7621-dts: allow gnubee to reboot cleanly.
Since commit bb276262e8 ("mtd: spi-nor: only apply reset hacks to
broken hardware"), we need to mark the spi-nor as "broken" for reboot
to work.
Note that nothing is actually broken here.  The hardware-watchdog in
the SoC isn't wired in a way that works, but then the board doesn't
claim to support a hardware watchdog - and the SPI certain isn't
"broken".

This causes an annoying warning on every boot, but that is better than
failing on ever reboot.

Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-12 11:55:39 +01:00
Sergio Paracuellos 65f679a826 staging: mt7621-dts: remove sysctl registers from pcie bindings
The sysctl register are already claimed by palmbus, so
pci fails to claim it. Remove registers accordly from DT
bindings.

Fixes: 624c5227ed0a: staging: mt7621-dts: add sysctl registers base address to pcie
Reported-by: NeilBrown <neil@brown.name>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Tested-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-26 20:59:05 +01:00
Sergio Paracuellos 624c5227ed staging: mt7621-dts: add sysctl registers base address to pcie
Add missing system control registers address in pcie node of
the device tree.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-11 11:36:15 -08:00
Sergio Paracuellos 532f14d973 staging: mt7621-dts: add pcie controller port registers
The pcie node of the device tree only contains registers
for the host-bridge and pcie port 0. Add the pcie port 1
and pcie port 2 also.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Tested-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-08 14:08:41 +02:00
Sergio Paracuellos d7461eab5a staging: mt7621-dts: use 'function' and 'group' for pinctrl bindings
According to documentation 'pinctrl-bindings.txt' bindings 'group'
and 'function' can be used directly. So replace all of them.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-06 17:33:43 +02:00
Sergio Paracuellos 6042985276 staging: mt7621-gpio: avoid use banks in device tree
Banks shouldn't be defined in DT if number of resources
per bank is not variable. We actually know that this SoC
has three banks so take that into account in order to don't
overspecify the device tree. Device tree will only have one
node making it simple. Update device tree, binding doc and
code accordly.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-28 21:50:59 +09:00
Rosen Penev d0233204fb staging: mt7621-dts: Fix remaining pcie warnings
This currently fixes the remaining dtb warnings:

Node /pcie@1e140000/pcie0 has a reg or ranges property, but no unit name
Node /pcie@1e140000/pcie1 has a reg or ranges property, but no unit name
Node /pcie@1e140000/pcie2 has a reg or ranges property, but no unit name
Node /pcie@1e140000/pcie0 node name is not "pci" or "pcie"
Node /pcie@1e140000/pcie0 missing ranges for PCI bridge (or not a bridge)
Node /pcie@1e140000/pcie0 missing bus-range for PCI bridge
Node /pcie@1e140000/pcie1 node name is not "pci" or "pcie"
Node /pcie@1e140000/pcie1 missing ranges for PCI bridge (or not a bridge)
Node /pcie@1e140000/pcie1 missing bus-range for PCI bridge
Node /pcie@1e140000/pcie2 node name is not "pci" or "pcie"
Node /pcie@1e140000/pcie2 missing ranges for PCI bridge (or not a bridge)
Node /pcie@1e140000/pcie2 missing bus-range for PCI bridge
Warning (unit_address_format): Failed prerequisite 'pci_bridge'
Warning (pci_device_reg): Failed prerequisite 'pci_bridge'
Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'

device_type was removed since according to documentation, it's deprecated
for pci(e) devices.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-28 21:50:16 +09:00
NeilBrown 1112b5b1c1 staging: mt7621-dts: convert to gpio-keys
Now that gpio-interrupts work correctly, we
can use gpio-keys instead of gpio-keys-polled
for the single push-button on the gbpc-1.

Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-17 09:05:11 +02:00
NeilBrown 97738374a3 staging: mt7621-dts: correct various clock frequencies.
The MT7621 documentation says that the sys clock - also known
as OCP clock for the Open Core Protocol - can be configured to
1/3 or 1/4 of the CPU clock.
Testing on my hardware, using the fact that the SPI clock is
based on the OCP clock and measuring transfer rates, shows
a clock of a little over 200MHz with a CPU clock of 900MHz.
So assume 1/4 is the default.

Also, the nor-flash in the gbpc1 is documented as accepting 50MHz
for request requests, and higher for other requests.  So set
maximum to 50MHz.

Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-17 09:05:11 +02:00
Sergio Paracuellos a7e09d3e8f staging: mt7621-gpio: update #interrupt-cells for the gpio node
Most gpio chips have two cells for interrupts and this should be also.
Set this property in the device tree accordly fixing this up. In order
to make this working properly the xlate function for the irq_domain must
be updated to use the  'irq_domain_xlate_twocell' one in the driver.
One more minimal change is needed two refer gpio's interrupt-parent from
other nodes which is to add new 'gpio' label in the device tree.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-01 13:16:23 +02:00
Sergio Paracuellos f910cc46f4 staging: mt7621-dts: add missing properties to gpio node
In order to let other devices reference the GPIO interrupts
if necessary properties 'interrupt-controller' and
'#interrupt-cells' becomes necessary. Add both of them to
complete gpio device tree node.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-01 11:17:05 +02:00
Sergio Paracuellos c7092ed794 staging: mt7621-dts: add interrupt device tree nodes for the gpio controller
The GPIO controller of mt7621 can receive interrupts on any
of the GPIOs, either edge or level. It then interrupts the CPU using
GIC INT12. Update device tree accordly.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-25 18:49:32 +02:00
Sergio Paracuellos 81ca7c496f staging: mt7621-dts: update gpios related entries to use 'mediatek'
Gpio driver for mt7621 is using 'mtk' as binding but in the kernel
is already defined one for this maker which is 'mediatek'. Update
device tree to use the correct one.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-25 18:49:32 +02:00
NeilBrown ab56a0d024 staging: mt7621-dts: update nor-flash info for gnubee1
The GNUBEE has 32MB flash, so set partitions accordingly.
Also remove "m25p,chunked-io" which isn't documented or
used anywhere (outside of freewrt).

Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-06 19:09:24 -07:00
NeilBrown 46d093124d staging: mt7621-pci: improve interrupt mapping
As the Interrupts for the PCI adapters are listed in
devicetree we shouldn't need to have them explicit in the code.

The simplest way to do this is to use of_irq_parse_and_map_pci()
and specify an interrupt-map which identifies the different
PCI hosts by bus/slot numbers.
This has the advantage that the hwirq number are mapped to virq
numbers for us, so the ugly hack can go.

Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-06 19:09:23 -07:00
Nishka Dasgupta 8e2ff0e4b5 staging: mt7621-dts: Replace spaces with tabs in indentation
Replace spaces with tabs in indentation.
Issue found with checkpatch.

Signed-off-by: Nishka Dasgupta <nishka.dasgupta_ug18@ashoka.edu.in>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-29 11:52:25 +02:00
NeilBrown d59578da2b staging: mt7621-dts: add dts files
Add device tree source for mt7621 and gnubee1 to
make testing easier.

Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19 19:56:02 +01:00