The check for a present page in printk_prot():
if (!pgprot_val(prot)) {
/* Not present */
is bogus. If a PTE is set to PAGE_NONE then the pgprot_val is not zero and
the entry is decoded in bogus ways, e.g. as RX GLB. That is confusing when
analyzing mapping correctness. Check for the present bit to make an
informed decision.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The recent cpu_entry_area changes fail to compile on 32-bit when BIGSMP=y
and NR_CPUS=512, because the fixmap area becomes too big.
Limit the number of CPUs with BIGSMP to 64, which is already way to big for
32-bit, but it's at least a working limitation.
We performed a quick survey of 32-bit-only machines that might be affected
by this change negatively, but found none.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
During driver init, various registers are saved to allow restoration
after an FLR or gen3 bump. Some of these registers are not available
in some circumstances (i.e. Virtual machines).
This bug makes the driver unusable when the PCI device is passed into
a VM, it fails during probe.
Delete unnecessary register read/write, and only access register if
the capability exists.
Cc: <stable@vger.kernel.org> # 4.14.x
Fixes: a618b7e40a ("IB/hfi1: Move saving PCI values to a separate function")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Following commit 9427ecbed4 ("gpio: Rework of_gpiochip_set_names()
to use device property accessors"), "gpio-line-names" DT property is
not retrieved anymore when chip->parent is not set by the driver.
This is due to OF based property reads having been replaced by device
based property reads.
This patch fixes that by making use of
fwnode_property_read_string_array() instead of
device_property_read_string_array() and handing over either
of_fwnode_handle(chip->of_node) or dev_fwnode(chip->parent)
to that function.
Fixes: 9427ecbed4 ("gpio: Rework of_gpiochip_set_names() to use device property accessors")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Revert changes introduced by commit f0fbe7bce7 ("gpio: Move irqdomain
into struct gpio_irq_chip") as they are not aplicable to this driver.
Reported-by: Russell King - ARM Linux <linux@armlinux.org.uk>
Fixes: f0fbe7bce7 ("gpio: Move irqdomain into struct gpio_irq_chip")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Since the commit 97cc2ed27e ("ALSA: hda - Fix yet another i915
pointer leftover in error path") cleared hdac_acomp pointer, the
WARN_ON() non-NULL check in snd_hdac_i915_register_notifier() may give
a false-positive warning, as the function gets called no matter
whether the component is registered or not. For fixing it, let's get
rid of the spurious WARN_ON().
Fixes: 97cc2ed27e ("ALSA: hda - Fix yet another i915 pointer leftover in error path")
Cc: <stable@vger.kernel.org>
Reported-by: Kouta Okamoto <kouta.okamoto@toshiba.co.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are two front mics on this machine, and current driver assign
the same name Mic to both of them, but pulseaudio can't handle them.
As a workaround, we change the location for one of them, then the
driver will assign "Front Mic" and "Mic" for them.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It has the codec alc256, and add its pin definition to pin quirk
table to let it apply ALC255_FIXUP_DELL1_MIC_NO_PRESENCE.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is a headset jack on the front panel, when we plug a headset
into it, the headset mic can't trigger unsol events, and
read_pin_sense() can't detect its presence too. So add this fixup
to fix this issue.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When we migrate a VM from a POWER8 host (XICS) to a POWER9 host
(XICS-on-XIVE), we have an error:
qemu-kvm: Unable to restore KVM interrupt controller state \
(0xff000000) for CPU 0: Invalid argument
This is because kvmppc_xics_set_icp() checks the new state
is internaly consistent, and especially:
...
1129 if (xisr == 0) {
1130 if (pending_pri != 0xff)
1131 return -EINVAL;
...
On the other side, kvmppc_xive_get_icp() doesn't set
neither the pending_pri value, nor the xisr value (set to 0)
(and kvmppc_xive_set_icp() ignores the pending_pri value)
As xisr is 0, pending_pri must be set to 0xff.
Fixes: 5af5099385 ("KVM: PPC: Book3S HV: Native usage of the XIVE interrupt controller")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When restoring a pending interrupt, we are setting the Q bit to force
a retrigger in xive_finish_unmask(). But we also need to force an EOI
in this case to reach the same initial state : P=1, Q=0.
This can be done by not setting 'old_p' for pending interrupts which
will inform xive_finish_unmask() that an EOI needs to be sent.
Fixes: 5af5099385 ("KVM: PPC: Book3S HV: Native usage of the XIVE interrupt controller")
Cc: stable@vger.kernel.org # v4.12+
Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The vk cts test:
dEQP-VK.api.external.semaphore.opaque_fd.export_multiple_times_temporary
triggers a lot of
VFS: Close: file count is 0
Dave pointed out that clearing the syncobj->file from
drm_syncobj_file_release() was sufficient to silence the test, but that
opens a can of worm since we assumed that the syncobj->file was never
unset. Stop trying to reuse the same struct file for every fd pointing
to the drm_syncobj, and allocate one file for each fd instead.
v2: Fixup return handling of drm_syncobj_fd_to_handle
v2.1: [airlied: fix possible syncobj ref race]
Reported-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
drm-misc-fixes before holidays:
- fixup for the lease fixup (Keith)
- fb leak in the ww mutex fallback code (Maarten)
- sun4i fixes (Maxime, Hans)
* tag 'drm-misc-fixes-2017-12-21' of git://anongit.freedesktop.org/drm/drm-misc:
drm: move lease init after validation in drm_lease_create
drm/plane: Make framebuffer refcounting the responsibility of setplane_internal callers
drm/sun4i: hdmi: Move the mode_valid callback to the encoder
drm/sun4i: Fix error path handling
drm/sun4i: validate modes for HDMI
Pull networking fixes from David Miller"
"What's a holiday weekend without some networking bug fixes? [1]
1) Fix some eBPF JIT bugs wrt. SKB pointers across helper function
calls, from Daniel Borkmann.
2) Fix regression from errata limiting change to marvell PHY driver,
from Zhao Qiang.
3) Fix u16 overflow in SCTP, from Xin Long.
4) Fix potential memory leak during bridge newlink, from Nikolay
Aleksandrov.
5) Fix BPF selftest build on s390, from Hendrik Brueckner.
6) Don't append to cfg80211 automatically generated certs file,
always write new ones from scratch. From Thierry Reding.
7) Fix sleep in atomic in mac80211 hwsim, from Jia-Ju Bai.
8) Fix hang on tg3 MTU change with certain chips, from Brian King.
9) Add stall detection to arc emac driver and reset chip when this
happens, from Alexander Kochetkov.
10) Fix MTU limitng in GRE tunnel drivers, from Xin Long.
11) Fix stmmac timestamping bug due to mis-shifting of field. From
Fredrik Hallenberg.
12) Fix metrics match when deleting an ipv4 route. The kernel sets
some internal metrics bits which the user isn't going to set when
it makes the delete request. From Phil Sutter.
13) mvneta driver loop over RX queues limits on "txq_number" :-) Fix
from Yelena Krivosheev.
14) Fix double free and memory corruption in get_net_ns_by_id, from
Eric W. Biederman.
15) Flush ipv4 FIB tables in the reverse order. Some tables can share
their actual backing data, in particular this happens for the MAIN
and LOCAL tables. We have to kill the LOCAL table first, because
it uses MAIN's backing memory. Fix from Ido Schimmel.
16) Several eBPF verifier value tracking fixes, from Edward Cree, Jann
Horn, and Alexei Starovoitov.
17) Make changes to ipv6 autoflowlabel sysctl really propagate to
sockets, unless the socket has set the per-socket value
explicitly. From Shaohua Li.
18) Fix leaks and double callback invocations of zerocopy SKBs, from
Willem de Bruijn"
[1] Is this a trick question? "Relaxing"? "Quiet"? "Fine"? - Linus.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (77 commits)
skbuff: skb_copy_ubufs must release uarg even without user frags
skbuff: orphan frags before zerocopy clone
net: reevalulate autoflowlabel setting after sysctl setting
openvswitch: Fix pop_vlan action for double tagged frames
ipv6: Honor specified parameters in fibmatch lookup
bpf: do not allow root to mangle valid pointers
selftests/bpf: add tests for recent bugfixes
bpf: fix integer overflows
bpf: don't prune branches when a scalar is replaced with a pointer
bpf: force strict alignment checks for stack pointers
bpf: fix missing error return in check_stack_boundary()
bpf: fix 32-bit ALU op verification
bpf: fix incorrect tracking of register size truncation
bpf: fix incorrect sign extension in check_alu_op()
bpf/verifier: fix bounds calculation on BPF_RSH
ipv4: Fix use-after-free when flushing FIB tables
s390/qeth: fix error handling in checksum cmd callback
tipc: remove joining group member from congested list
selftests: net: Adding config fragment CONFIG_NUMA=y
nfp: bpf: keep track of the offloaded program
...
Makefile has a LLC variable that is initialised to "llc", but can
theoretically be overridden from the command line ("make LLC=llc-6.0").
However, this fails because for LLVM probe check, "llc" is called
directly. Use the $(LLC) variable instead to fix this.
Fixes: 22c8852624 ("bpf: improve selftests and add tests for meta pointer")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The locking order of vlan_rwsem (LOCK A) and then rtnl (LOCK B),
contradicts other flows such as ipoib_open possibly causing a deadlock.
To prevent this deadlock heavy flush is called with RTNL locked and
only then tries to acquire vlan_rwsem.
This deadlock is possible only when there are child interfaces.
[ 140.941758] ======================================================
[ 140.946276] WARNING: possible circular locking dependency detected
[ 140.950950] 4.15.0-rc1+ #9 Tainted: G O
[ 140.954797] ------------------------------------------------------
[ 140.959424] kworker/u32:1/146 is trying to acquire lock:
[ 140.963450] (rtnl_mutex){+.+.}, at: [<ffffffffc083516a>] __ipoib_ib_dev_flush+0x2da/0x4e0 [ib_ipoib]
[ 140.970006]
but task is already holding lock:
[ 140.975141] (&priv->vlan_rwsem){++++}, at: [<ffffffffc0834ee1>] __ipoib_ib_dev_flush+0x51/0x4e0 [ib_ipoib]
[ 140.982105]
which lock already depends on the new lock.
[ 140.990023]
the existing dependency chain (in reverse order) is:
[ 140.998650]
-> #1 (&priv->vlan_rwsem){++++}:
[ 141.005276] down_read+0x4d/0xb0
[ 141.009560] ipoib_open+0xad/0x120 [ib_ipoib]
[ 141.014400] __dev_open+0xcb/0x140
[ 141.017919] __dev_change_flags+0x1a4/0x1e0
[ 141.022133] dev_change_flags+0x23/0x60
[ 141.025695] devinet_ioctl+0x704/0x7d0
[ 141.029156] sock_do_ioctl+0x20/0x50
[ 141.032526] sock_ioctl+0x221/0x300
[ 141.036079] do_vfs_ioctl+0xa6/0x6d0
[ 141.039656] SyS_ioctl+0x74/0x80
[ 141.042811] entry_SYSCALL_64_fastpath+0x1f/0x96
[ 141.046891]
-> #0 (rtnl_mutex){+.+.}:
[ 141.051701] lock_acquire+0xd4/0x220
[ 141.055212] __mutex_lock+0x88/0x970
[ 141.058631] __ipoib_ib_dev_flush+0x2da/0x4e0 [ib_ipoib]
[ 141.063160] __ipoib_ib_dev_flush+0x71/0x4e0 [ib_ipoib]
[ 141.067648] process_one_work+0x1f5/0x610
[ 141.071429] worker_thread+0x4a/0x3f0
[ 141.074890] kthread+0x141/0x180
[ 141.078085] ret_from_fork+0x24/0x30
[ 141.081559]
other info that might help us debug this:
[ 141.088967] Possible unsafe locking scenario:
[ 141.094280] CPU0 CPU1
[ 141.097953] ---- ----
[ 141.101640] lock(&priv->vlan_rwsem);
[ 141.104771] lock(rtnl_mutex);
[ 141.109207] lock(&priv->vlan_rwsem);
[ 141.114032] lock(rtnl_mutex);
[ 141.116800]
*** DEADLOCK ***
Fixes: b4b678b06f ("IB/ipoib: Grab rtnl lock on heavy flush when calling ndo_open/stop")
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Congestion counters are counted and queried per physical function.
When working in LAG mode, CNP packets can be sent or received on both
of the functions, thus congestion counters should be aggregated from
the two physical functions.
Fixes: e1f24a79f4 ("IB/mlx5: Support congestion related counters")
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Aviv Heller <avivh@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The use of wait queues in vmw_pvrdma for handling concurrent
access to a resource leaves a race condition which can cause a use
after free bug.
Fix this by using the pattern from other drivers, complete() protected by
dec_and_test to ensure complete() is called only once.
Fixes: 29c8d9eba5 ("IB: Add vmw_pvrdma driver")
Signed-off-by: Bryan Tan <bryantan@vmware.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
refcount_dec generates a warning when the operation
causes the refcount to hit zero. Avoid this by using
refcount_dec_and_test.
Fixes: 8b10ba783c ("RDMA/vmw_pvrdma: Add shared receive queue support")
Reviewed-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Aditya Sarwade <asarwade@vmware.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Bryan Tan <bryantan@vmware.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If a wr chain was posted and needed to be flushed, only the first
wr in the chain was completed with FLUSHED status. The rest were
never completed. This caused isert to hang on shutdown due to the
missing completions which left iscsi IO commands referenced, stalling
the shutdown.
Fixes: 4fe7c2962e ("iw_cxgb4: refactor sq/rq drain logic")
Cc: stable@vger.kernel.org
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The flush/drain logic was not retaining the original wr opcode in
its completion. This can cause problems if the application uses
the completion opcode to make decisions.
Use bit 10 of the CQE header word to indicate the CQE is a special
drain completion, and save the original WR opcode in the cqe header
opcode field.
Fixes: 4fe7c2962e ("iw_cxgb4: refactor sq/rq drain logic")
Cc: stable@vger.kernel.org
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If the RECV CQE is in error, ignore the MSN check. This was causing
recvs that were flushed into the sw cq to be completed with the wrong
status (BAD_MSN instead of FLUSHED).
Cc: stable@vger.kernel.org
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Due to a spec misinterpretation, the Linux implementation of the BTT log
area had different padding scheme from other implementations, such as
UEFI and NVML.
This fixes the padding scheme, and defaults to it for new BTT layouts.
We attempt to detect the padding scheme in use when probing for an
existing BTT. If we detect the older/incompatible scheme, we continue
using it.
Reported-by: Juston Li <juston.li@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Fixes: 5212e11fde ("nd_btt: atomic sector updates")
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Recent updates to btt.h neglected to add corresponding kernel-doc lines
for new structure members. Add them.
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Saeed Mahameed says:
===================
Mellanox, mlx5 fixes 2017-12-19
The follwoing series includes some fixes for mlx5 core and etherent
driver.
Please pull and let me know if there is any problem.
This series doesn't introduce any conflict with the ongoing mlx5 for-next
submission.
For -stable:
kernels >= v4.7.y
("net/mlx5e: Fix possible deadlock of VXLAN lock")
("net/mlx5e: Add refcount to VXLAN structure")
("net/mlx5e: Prevent possible races in VXLAN control flow")
("net/mlx5e: Fix features check of IPv6 traffic")
kernels >= v4.9.y
("net/mlx5: Fix error flow in CREATE_QP command")
("net/mlx5: Fix rate limit packet pacing naming and struct")
kernels >= v4.13.y
("net/mlx5: FPGA, return -EINVAL if size is zero")
kernels >= v4.14.y
("Revert "mlx5: move affinity hints assignments to generic code")
All above patches apply and compile with no issues on corresponding -stable.
===================
Signed-off-by: David S. Miller <davem@davemloft.net>
skb_copy_ubufs creates a private copy of frags[] to release its hold
on user frags, then calls uarg->callback to notify the owner.
Call uarg->callback even when no frags exist. This edge case can
happen when zerocopy_sg_from_iter finds enough room in skb_headlen
to copy all the data.
Fixes: 3ece782693 ("sock: skb_copy_ubufs support for compound pages")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Call skb_zerocopy_clone after skb_orphan_frags, to avoid duplicate
calls to skb_uarg(skb)->callback for the same data.
skb_zerocopy_clone associates skb_shinfo(skb)->uarg from frag_skb
with each segment. This is only safe for uargs that do refcounting,
which is those that pass skb_orphan_frags without dropping their
shared frags. For others, skb_orphan_frags drops the user frags and
sets the uarg to NULL, after which sock_zerocopy_clone has no effect.
Qemu hangs were reported due to duplicate vhost_net_zerocopy_callback
calls for the same data causing the vhost_net_ubuf_ref_>refcount to
drop below zero.
Link: http://lkml.kernel.org/r/<CAF=yD-LWyCD4Y0aJ9O0e_CHLR+3JOeKicRRTEVCPxgw4XOcqGQ@mail.gmail.com>
Fixes: 1f8b977ab3 ("sock: enable MSG_ZEROCOPY")
Reported-by: Andreas Hartmann <andihartmann@01019freenet.de>
Reported-by: David Hill <dhill@redhat.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull block fixes from Jens Axboe:
"It's been a few weeks, so here's a small collection of fixes that
should go into the current series.
This contains:
- NVMe pull request from Christoph, with a few important fixes.
- kyber hang fix from Omar.
- A blk-throttl fix from Shaohua, fixing a case where we double
charge a bio.
- Two call_single_data alignment fixes from me, fixing up some
unfortunate changes that went into 4.14 without being properly
reviewed on the block side (since nobody was CC'ed on the
patch...).
- A bounce buffer fix in two parts, one from me and one from Ming.
- Revert bdi debug error handling patch. It's causing boot issues for
some folks, and a week down the line, we're still no closer to a
fix. Revert this patch for now until it's figured out, then we can
retry for 4.16"
* 'for-linus' of git://git.kernel.dk/linux-block:
Revert "bdi: add error handle for bdi_debug_register"
null_blk: unalign call_single_data
block: unalign call_single_data in struct request
block-throttle: avoid double charge
block: fix blk_rq_append_bio
block: don't let passthrough IO go into .make_request_fn()
nvme: setup streams after initializing namespace head
nvme: check hw sectors before setting chunk sectors
nvme: call blk_integrity_unregister after queue is cleaned up
nvme-fc: remove double put reference if admin connect fails
nvme: set discard_alignment to zero
kyber: fix another domain token wait queue hang
- A bug in handling of SPE state for non-vhe systems
- A fix for a crash on system shutdown
- Three timer fixes, introduced by the timer optimizations for v4.15
x86 fixes:
- fix for a WARN that was introduced in 4.15
- fix for SMM when guest uses PCID
- fixes for several bugs found by syzkaller
... and a dozen papercut fixes for the kvm_stat tool.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJaO6N9AAoJEL/70l94x66DC1wH/Rf+u0Cj6ZQil6LK6Nf8bfPd
3TqrwrxUDeXwi8GzsvK14izBr1mDzidSHIO0Q4XINFRSRdaf43h3R2im/SJqvNhP
xktCmJI2CxN96oaC7kIExgwf3YKhFdLIADfbT8oR9p3xZG/+c97dkr3b4XtmVCDb
ZXdUEOcKnoW4zwpfJN30FLlq4OwYvuYVz02AEfPivZRDfhhus/TYSnuSdxH8CLNf
75ymuKyXoo/RELbimwbMk8Cm9+ey7PjlUGOgbnbXIFtmgznXhLzAOeES2B+46J5b
sMBPlmiJrn6N//lM18CC5yOBzBLGsYOoXggtw4aU/5nM4GVcFebWedpcoD4D8Jw=
=Bt8w
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"ARM fixes:
- A bug in handling of SPE state for non-vhe systems
- A fix for a crash on system shutdown
- Three timer fixes, introduced by the timer optimizations for v4.15
x86 fixes:
- fix for a WARN that was introduced in 4.15
- fix for SMM when guest uses PCID
- fixes for several bugs found by syzkaller
... and a dozen papercut fixes for the kvm_stat tool"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits)
tools/kvm_stat: sort '-f help' output
kvm: x86: fix RSM when PCID is non-zero
KVM: Fix stack-out-of-bounds read in write_mmio
KVM: arm/arm64: Fix timer enable flow
KVM: arm/arm64: Properly handle arch-timer IRQs after vtimer_save_state
KVM: arm/arm64: timer: Don't set irq as forwarded if no usable GIC
KVM: arm/arm64: Fix HYP unmapping going off limits
arm64: kvm: Prevent restoring stale PMSCR_EL1 for vcpu
KVM/x86: Check input paging mode when cs.l is set
tools/kvm_stat: add line for totals
tools/kvm_stat: stop ignoring unhandled arguments
tools/kvm_stat: suppress usage information on command line errors
tools/kvm_stat: handle invalid regular expressions
tools/kvm_stat: add hint on '-f help' to man page
tools/kvm_stat: fix child trace events accounting
tools/kvm_stat: fix extra handling of 'help' with fields filter
tools/kvm_stat: fix missing field update after filter change
tools/kvm_stat: fix drilldown in events-by-guests mode
tools/kvm_stat: fix command line option '-g'
kvm: x86: fix WARN due to uninitialized guest FPU state
...
sysctl.ip6.auto_flowlabels is default 1. In our hosts, we set it to 2.
If sockopt doesn't set autoflowlabel, outcome packets from the hosts are
supposed to not include flowlabel. This is true for normal packet, but
not for reset packet.
The reason is ipv6_pinfo.autoflowlabel is set in sock creation. Later if
we change sysctl.ip6.auto_flowlabels, the ipv6_pinfo.autoflowlabel isn't
changed, so the sock will keep the old behavior in terms of auto
flowlabel. Reset packet is suffering from this problem, because reset
packet is sent from a special control socket, which is created at boot
time. Since sysctl.ipv6.auto_flowlabels is 1 by default, the control
socket will always have its ipv6_pinfo.autoflowlabel set, even after
user set sysctl.ipv6.auto_flowlabels to 1, so reset packset will always
have flowlabel. Normal sock created before sysctl setting suffers from
the same issue. We can't even turn off autoflowlabel unless we kill all
socks in the hosts.
To fix this, if IPV6_AUTOFLOWLABEL sockopt is used, we use the
autoflowlabel setting from user, otherwise we always call
ip6_default_np_autolabel() which has the new settings of sysctl.
Note, this changes behavior a little bit. Before commit 42240901f7
(ipv6: Implement different admin modes for automatic flow labels), the
autoflowlabel behavior of a sock isn't sticky, eg, if sysctl changes,
existing connection will change autoflowlabel behavior. After that
commit, autoflowlabel behavior is sticky in the whole life of the sock.
With this patch, the behavior isn't sticky again.
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Tom Herbert <tom@quantonium.net>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
skb_vlan_pop() expects skb->protocol to be a valid TPID for double
tagged frames. So set skb->protocol to the TPID and let skb_vlan_pop()
shift the true ethertype into position for us.
Fixes: 5108bbaddc ("openvswitch: add processing of L3 packets")
Signed-off-by: Eric Garver <e@erig.me>
Reviewed-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The following functions:
* rf69_set_dc_cut_off_frequency,
* rf69_set_dc_cut_off_frequency_intern,
* rf69_set_dc_cut_off_frequency_during_afc
are unused and should be removed along with type enum dcc_percent which
was used only by these functions.
Signed-off-by: Marcin Ciupak <marcin.s.ciupak@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function rf69_set_ook_threshold_type is unused and should be removed
along with type enum thresholdType which was used only by that function.
Signed-off-by: Marcin Ciupak <marcin.s.ciupak@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function rf69_set_ook_threshold_step is unused and should be removed
along with type enum thresholdStep which was used only by that function.
Signed-off-by: Marcin Ciupak <marcin.s.ciupak@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function rf69_set_rx_start_timeout is unused and should be removed.
Signed-off-by: Marcin Ciupak <marcin.s.ciupak@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function rf69_set_rssi_timeout is unused and should be removed.
Signed-off-by: Marcin Ciupak <marcin.s.ciupak@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function rf69_get_payload_length is unused and should be removed.
Signed-off-by: Marcin Ciupak <marcin.s.ciupak@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Following functions:
* rf69_get_modulation
* rf69_read_reg
* rf69_write_reg
are used locally only and should be declared as static
Signed-off-by: Marcin Ciupak <marcin.s.ciupak@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes various coding style issues in the rtl8712 module as
noted by checkpatch.pl related to dereferencing over multiple lines.
It fixes the following checkpatch.pl warning:
WARNING: Avoid multiple line dereference - prefer %s
Signed-off-by: Martin Homuth <martin@martinhomuth.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix these checkpatch.pl warnings in comedidev.h:
WARNING: function definition argument '<name>' should also have an identifier name
Introduces this checkpatch.pl warning in lines 195 and 205:
WARNING: line over 80 characters
Breaking these lines would make the code less compact.
Signed-off-by: Michael Gebhard <im72ywil@cip.cs.fau.de>
Signed-off-by: David Sauerwein <la38vyti@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are two reasons for replacing 'uint32_t' with 'u32'
and 'uint64_t' with 'u64':
1) As Linus Torvalds have said we should use kernel types:
http://lkml.iu.edu/hypermail//linux/kernel/1506.0/00160.html
2) There are only few places in the lustre codebase that use such types.
In the most cases it uses 'u32' and 'u64'.
Signed-off-by: Roman Storozhenko <romeusmeister@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Do not check for NOT NULL before calling kfree because
if the pointer is NULL, no action occurs.
Done using the following semantic patch by coccinelle.
@@
expression ptr;
@@
- if (ptr != NULL)
kfree(ptr);
Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This removes checkpatch.pl warnings:
WARNING: Block comments use a trailing */ on a separate line
WARNING: Block comments should align the * on each line
WARNING: Block comments use * on subsequent lines
Signed-off-by: Mikhail Shvetsov <lameli67@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pi433_write function should return the number of processed bytes
Reported-by: Marcin Ciupak <marcin.s.ciupak@gmail.com>
Signed-off-by: Oliver Graute <oliver.graute@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The previous patch ensures Tx flow affinity for forwarded frames,
but for termination traffic the initial flow affinity is determined
based on the skb hash, which is expected to hit only a few Tx queues
when there is a small number of flows.
Instead, use XPS (transmit packet steering) to set netdevice queue
affinity to the sending core.
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
