The mod_start and mod_len fields of struct extent_map were introduced by
commit 4e2f84e63d ("Btrfs: improve fsync by filtering extents that we
want") in order to avoid too low performance when fsyncing a file that
keeps getting extent maps merge, because it resulted in each fsync logging
again csum ranges that were already merged before.
We don't need this anymore as extent maps in the list of modified extents
are never merged with other extent maps and once we log an extent map we
remove it from the list of modified extent maps, so it's never logged
twice.
So remove the mod_start and mod_len fields from struct extent_map and use
instead the start and len fields when logging checksums in the fast fsync
path. This also makes EXTENT_FLAG_FILLING unused so remove it as well.
Running the reproducer from the commit mentioned before, with a larger
number of extents and against a null block device, so that IO is fast
and we can better see any impact from searching checksums items and
logging them, gave the following results from dd:
Before this change:
409600000 bytes (410 MB, 391 MiB) copied, 22.948 s, 17.8 MB/s
After this change:
409600000 bytes (410 MB, 391 MiB) copied, 22.9997 s, 17.8 MB/s
So no changes in throughput.
The test was done in a release kernel (non-debug, Debian's default kernel
config) and its steps are the following:
$ mkfs.btrfs -f /dev/nullb0
$ mount /dev/sdb /mnt
$ dd if=/dev/zero of=/mnt/foobar bs=4k count=100000 oflag=sync
$ umount /mnt
This also reduces the size of struct extent_map from 128 bytes down to 112
bytes, so now we can have 36 extents maps per 4K page instead of 32.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Some of the operations after the free might convert more PERTRANS
metadata. Do the freeing as late as possible to eliminate a source of
leaked PERTRANS metadata.
This helps with the pass rate of generic/269 and generic/475.
Reviewed-by: Qu Wenruo <qwu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
For both compression and decompression paths, we always require a
"struct page **pages" and "unsigned long nr_pages", this involves quite
some part of the btrfs compression paths:
- All the compression entry points
- compressed_bio structure
This affects both compression and decompression.
- async_extent structure
Unfortunately with all those involved parts, there is no good way to
split the conversion into smaller patches while still passing compiling.
So do this in one big conversion in one go.
Please note this is direct page->folio conversion, no change on the page
sized folio requirement yet.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor style fixups ]
Signed-off-by: David Sterba <dsterba@suse.com>
The new helper will do the same thing as btrfs_alloc_page_array(), but
with folios.
One extra difference is, there is no extra helper for bulk allocation,
thus it may not be as efficient as the page version.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since insert_inline_extent() now only accepts a single page, it's much
easier to convert it to use folio interfaces.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since our inline extent cannot accept anything larger than a sector,
there is really no need to pass all the compressed pages to
insert_inline_extent().
And just in case, expand the ASSERT()s to make sure we only try inline
with compressed size no larger than sectorsize.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we have two wrappers to allocate and free a page for
compression usage:
- btrfs_alloc_compr_page()
- btrfs_free_compr_page()
The allocator would try to grab a page from the pool, and only allocate
a new page if the pool is empty.
The reclaimer would check if the pool is full, and if not full it would
put the page into the pool.
This patch converts both helpers to use folio interfaces, and allowing
further conversion of compression path to folios.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For all the supported compression algorithms, the compression path would
always need to grab the page cache, then do the compression.
Normally we would get a page reference without any problem, since the
write path should have already locked the pages in the write range.
For the sake of error handling, we should handle the page cache miss
case.
Adds a common wrapper, btrfs_compress_find_get_page(), which calls
find_get_page(), and do the error handling along with an error message.
Callers inside compression path would only need to call
btrfs_compress_find_get_page(), and error out if it returned any error.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nowadays before starting a reflink operation we do this:
1) Take the VFS lock of the inodes in exclusive mode (a rw semaphore);
2) Take the mmap lock of the inodes (struct btrfs_inode::i_mmap_lock);
3) Flush all delalloc in the source and target ranges;
4) Wait for all ordered extents in the source and target ranges to
complete;
5) Lock the source and destination ranges in the inodes' io trees.
In step 5 we lock the source range because:
1) We needed to serialize against mmap writes, but that is not needed
anymore because nowadays we do that through the inode's i_mmap_lock
(step 2). This happens since commit 8c99516a8c ("btrfs: exclude mmaps
while doing remap");
2) To serialize against a concurrent relocation and avoid generating
a delayed ref for an extent that was just dropped by relocation, see
commit d8b5524242 ("Btrfs: fix race between reflink/dedupe and
relocation").
Locking the source range however blocks any concurrent reads for that
range and makes test case generic/733 fail.
So instead of locking the source range during reflinks, make relocation
read lock the inode's i_mmap_lock, so that it serializes with a concurrent
reflink while still able to run concurrently with mmap writes and allow
concurrent reads too.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This check "if (inherit->num_qgroups > PAGE_SIZE)" is confusing and
unnecessary.
The problem with the check is that static checkers flag it as a
potential mixup of between units of bytes vs number of elements.
Fortunately, the check can safely be deleted because the next check is
correct and applies an even stricter limit:
if (size != struct_size(inherit, qgroups, inherit->num_qgroups))
return -EINVAL;
The "inherit" struct ends in a variable array of __u64 and
"inherit->num_qgroups" is the number of elements in the array. At the
start of the function we check that:
if (size < sizeof(*inherit) || size > PAGE_SIZE)
return -EINVAL;
Thus, since we verify that the whole struct fits within one page, that
means that the number of elements in the inherit->qgroups[] array must
be less than PAGE_SIZE.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use folio instead of page in put_file_data(). Add a warning in case
higher order folio is found, this will be implemented in the future.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Convert page references to folios and call the respective folio
functions. Since find_or_create_page() takes a mask argument, call
__filemap_get_folio() instead of filemap_grab_folio().
The patch assumes folio size is PAGE_SIZE, add a warning in case it's a
higher order that will be implemented in the future.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Convert usage of page to folio in prealloc_file_extent_cluster()
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Unify naming of return value to the preferred way.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Unify naming of return value to the preferred way.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Unify naming of return value to the preferred way.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Unify naming of return value to the preferred way.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Unify naming of return value to the preferred way.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Unify naming of return value to the preferred way.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Unify naming of return value to the preferred way.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Unify naming of return value to the preferred way.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Unify naming of return value to the preferred way.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Unify naming of return value to the preferred way.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Unify naming of return value to the preferred way.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We recently tracked down a race condition that triggered a read for an
extent buffer with EXTENT_BUFFER_UPTODATE already set. While this read
was in progress, other concurrent readers would see the UPTODATE bit and
return early as if the read was already complete, making accesses to the
extent buffer conflict with the read operation that was overwriting it.
Add a WARN_ON() to end_bbio_meta_read() for this situation to make
similar races easier to spot in the future.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Tavian Barnes <tavianator@tavianator.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We are clearing the bit and waking up any waiters in two different
places. Factor that code out into a static helper function.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Tavian Barnes <tavianator@tavianator.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When unlocking a write lock on a drew lock, at btrfs_drew_write_unlock(),
it's pointless to wake up tasks waiting to acquire a read lock if we
didn't decrement the 'writers' counter down to 0, since a read lock can
only be acquired when the counter reaches a value of 0. Doing so is
harmless from a functional point of view, but it's not efficient due to
unnecessarily waking up tasks just for them to sleep again on the
waitqueue.
So change this to wake up readers only if we decremented the 'writers'
counter to 0.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's no point in having a static writepages callback in inode.c that
does nothing besides calling extent_writepages from extent_io.c.
So just remove the callback at inode.c and rename extent_writepages()
to btrfs_writepages().
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's no point in having a static readahead callback in inode.c that
does nothing besides calling extent_readahead() from extent_io.c.
So just remove the callback at inode.c and rename extent_readahead()
to btrfs_readahead().
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The __btrfs_tree_lock() and __btrfs_tree_read_lock() are using a naming
with a double underscore prefix, which is specially not proper for
exported functions. Remove the double underscore prefix from their name
and add the "_nested" suffix.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The functions btrfs_tree_lock() and btrfs_tree_read_lock() are very
trivial so that can be made inline and avoid call overhead, as they
are very often called inside critical sections (when searching a btree
for example, attempting to lock a child node/leaf while holding a lock
on the parent).
So make them static inline, which even reduces the size of the btrfs
module a little bit.
Before this change:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1718786 156276 16920 1891982 1cde8e fs/btrfs/btrfs.ko
After this change:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1718650 156260 16920 1891830 1cddf6 fs/btrfs/btrfs.ko
Running fs_mark also showed a tiny improvement with this script:
$ cat test.sh
#!/bin/bash
DEV=/dev/nullb0
MNT=/mnt/nullb0
FILES=100000
THREADS=$(nproc --all)
echo "performance" | \
tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
umount $DEV &> /dev/null
mkfs.btrfs -f $DEV
mount $DEV $MNT
OPTS="-S 0 -L 5 -n $FILES -s 0 -t $THREADS -k"
for ((i = 1; i <= $THREADS; i++)); do
OPTS="$OPTS -d $MNT/d$i"
done
fs_mark $OPTS
umount $MNT
Before this change:
FSUse% Count Size Files/sec App Overhead
10 1200000 0 180894.0 10705410
16 2400000 0 228211.4 10765738
23 3600000 0 215969.6 11011072
30 4800000 0 199077.1 11145587
46 6000000 0 176624.1 11658470
After this change:
FSUse% Count Size Files/sec App Overhead
10 1200000 0 185312.3 10708377
16 2400000 0 229320.4 10858013
23 3600000 0 217958.7 11006167
30 4800000 0 205122.9 11112899
46 6000000 0 178039.1 11438852
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When creating a snapshot we first check with btrfs_lookup_dir_item() if
there is a name collision in the parent directory and then return an error
if there's a collision. Then later on when trying to insert a dir item for
the snapshot we BUG_ON() if the return value is -EEXIST or -EOVERFLOW:
static noinline int create_pending_snapshot(...)
{
(...)
/* check if there is a file/dir which has the same name. */
dir_item = btrfs_lookup_dir_item(...);
(...)
ret = btrfs_insert_dir_item(...);
/* We have check then name at the beginning, so it is impossible. */
BUG_ON(ret == -EEXIST || ret == -EOVERFLOW);
if (ret) {
btrfs_abort_transaction(trans, ret);
goto fail;
}
(...)
}
It's impossible to get the -EEXIST because we previously checked for a
potential collision with btrfs_lookup_dir_item() and we know that after
that no one could have added a colliding name because at this point the
transaction is in its critical section, state TRANS_STATE_COMMIT_DOING,
so no one can join this transaction to add a colliding name and neither
can anyone start a new transaction to do that.
As for the -EOVERFLOW, that can't happen as long as we have the extended
references feature enabled, which is a mkfs default for many years now.
In either case, the BUG_ON() is excessive as we can properly deal with
any error and can abort the transaction and jump to the 'fail' label,
in which case we'll also get the useful stack trace (just like a BUG_ON())
from the abort if the error is either -EEXIST or -EOVERFLOW.
So remove the BUG_ON().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=2no9
-----END PGP SIGNATURE-----
Merge tag 'for-6.9-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Two more fixes, both have some visible effects on user space:
- add check if quotas are enabled when passing qgroup inheritance
info, this affects snapper that could fail to create a snapshot
- do check for leaf/node flag WRITTEN earlier so that nodes are
completely validated before access, this used to be done by
integrity checker but it's been removed and left an unhandled case"
* tag 'for-6.9-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: make sure that WRITTEN is set on all metadata blocks
btrfs: qgroup: do not check qgroup inherit if qgroup is disabled
This reverts commit 07ed11afb6.
Stephen Rostedt reports:
"I went to run my tests on my VMs and the tests hung on boot up.
Unfortunately, the most I ever got out was:
[ 93.607888] Testing event system initcall: OK
[ 93.667730] Running tests on all trace events:
[ 93.669757] Testing all events: OK
[ 95.631064] ------------[ cut here ]------------
Timed out after 60 seconds"
and further debugging points to a possible circular locking dependency
between the console_owner locking and the worker pool locking.
Reverting the commit allows Steve's VM to boot to completion again.
[ This may obviously result in the "[TTM] Buffer eviction failed"
messages again, which was the reason for that original revert. But at
this point this seems preferable to a non-booting system... ]
Reported-and-bisected-by: Steven Rostedt <rostedt@goodmis.org>
Link: https://lore.kernel.org/all/20240502081641.457aa25f@gandalf.local.home/
Acked-by: Maxime Ripard <mripard@kernel.org>
Cc: Alex Constantino <dreaming.about.electric.sheep@gmail.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Timo Lindfors <timo.lindfors@iki.fi>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmY4pYcACgkQu+CwddJF
iJpdxAf/eRUaRSJ2mI2XbK8yzvzCmWMU7xh5uMTCfXIKzvf5sBV5xXRLKi+owJ+k
artBjIHzZ7Y0DFS3dJboY1iyjpTMzC8Mn1kWUNV+7N44FaOaICckBgi7q2iyayQG
O/aukwwCh4dDpQqY0LeLg39UicLU4uS/8NDkII6CJQTep6tpbtvLGxONwlkbd9x2
9EDPC1Y3p2M0N7P12pJs/nwRx7vxdHTmBcE72OU6wq7sWLou2vzSVBzWlFfnEURD
Kbq3/7y6WRhSmz05WCJ+BGEMSvwjM9YMn56LfHDa/mGCySH2/Wr/d39hVTv746zG
66anLCU/NpqtzTn5wM3vunKRh+K3Eg==
=+O33
-----END PGP SIGNATURE-----
Merge tag 'slab-for-6.9-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fixes from Vlastimil Babka:
- Fix for cleanup infrastructure (Dan Carpenter)
This makes the __free(kfree) cleanup hooks not crash on error
pointers.
- SLUB fix for freepointer checking (Nicolas Bouchinet)
This fixes a recently introduced bug that manifests when
init_on_free, CONFIG_SLAB_FREELIST_HARDENED and consistency checks
(slub_debug=F) are all enabled, and results in false-positive
freepointer corrupt reports for caches that store freepointer outside
of the object area.
* tag 'slab-for-6.9-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slab: make __free(kfree) accept error pointers
mm/slub: avoid zeroing outside-object freepointer for single free
* A couple of non-critical build fixes to Character LCD library
* Miscellaneous fixes here and there
The following is an automated git shortlog grouped by driver:
charlcd:
- Don't rebuild when CONFIG_PANEL_BOOT_MESSAGE=y
- Add missing MODULE_DESCRIPTION()
linedisp:
- Group display drivers together
seg-led-gpio:
- Convert to platform remove callback returning void
-----BEGIN PGP SIGNATURE-----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=gP6u
-----END PGP SIGNATURE-----
Merge tag 'auxdisplay-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay
Pull auxdisplay fixes from Andy Shevchenko:
- A couple of non-critical build fixes to Character LCD library
- Miscellaneous fixes here and there
* tag 'auxdisplay-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay:
auxdisplay: charlcd: Don't rebuild when CONFIG_PANEL_BOOT_MESSAGE=y
auxdisplay: charlcd: Add missing MODULE_DESCRIPTION()
auxdisplay: seg-led-gpio: Convert to platform remove callback returning void
auxdisplay: linedisp: Group display drivers together
epoll can call out to vfs_poll() with a file pointer that may race with
the last 'fput()'. That would make f_count go down to zero, and while
the ep->mtx locking means that the resulting file pointer tear-down will
be blocked until the poll returns, it means that f_count is already
dead, and any use of it won't actually get a reference to the file any
more: it's dead regardless.
Make sure we have a valid ref on the file pointer before we call down to
vfs_poll() from the epoll routines.
Link: https://lore.kernel.org/lkml/0000000000002d631f0615918f1e@google.com/
Reported-by: syzbot+045b454ab35fd82a35fb@syzkaller.appspotmail.com
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
in the versal EDAC driver
-----BEGIN PGP SIGNATURE-----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=0/mm
-----END PGP SIGNATURE-----
Merge tag 'edac_urgent_for_v6.9_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
- Fix error logging and check user-supplied data when injecting an
error in the versal EDAC driver
* tag 'edac_urgent_for_v6.9_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/versal: Do not log total error counts
EDAC/versal: Check user-supplied data before injecting an error
EDAC/versal: Do not register for NOC errors
- Fix incorrect delay handling in the plpks (keystore) code.
- Fix a panic when an LPAR boots with a frozen PE.
Thanks to: Andrew Donnellan, Gaurav Batra, Nageswara R Sastry, Nayna Jain.
-----BEGIN PGP SIGNATURE-----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=nXL6
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix incorrect delay handling in the plpks (keystore) code
- Fix a panic when an LPAR boots with a frozen PE
Thanks to Andrew Donnellan, Gaurav Batra, Nageswara R Sastry, and Nayna
Jain.
* tag 'powerpc-6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries/iommu: LPAR panics during boot up with a frozen PE
powerpc/pseries: make max polling consistent for longer H_CALLs
- Remove the broken vsyscall emulation code from
the page fault code.
- Fix kexec crash triggered by certain SEV RMP
table layouts.
- Fix unchecked MSR access error when disabling
the x2APIC via iommu=off.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=o9E8
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2024-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Remove the broken vsyscall emulation code from
the page fault code
- Fix kexec crash triggered by certain SEV RMP
table layouts
- Fix unchecked MSR access error when disabling
the x2APIC via iommu=off
* tag 'x86-urgent-2024-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Remove broken vsyscall emulation code from the page fault code
x86/apic: Don't access the APIC when disabling x2APIC
x86/sev: Add callback to apply RMP table fixups for kexec
x86/e820: Add a new e820 table update helper
Here are some small char/misc/other driver fixes and new device ids for
6.9-rc7 that resolve some reported problems.
Included in here are:
- iio driver fixes
- mei driver fix and new device ids
- dyndbg bugfix
- pvpanic-pci driver bugfix
- slimbus driver bugfix
- fpga new device id
All have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZjdD2Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk38wCeJeUXW4/yQ4BTj7cHir0aOowVs+UAnAxCUwzt
NpooaVg3v9tzLtvAOp1O
=YfmA
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc/other driver fixes and new device ids
for 6.9-rc7 that resolve some reported problems.
Included in here are:
- iio driver fixes
- mei driver fix and new device ids
- dyndbg bugfix
- pvpanic-pci driver bugfix
- slimbus driver bugfix
- fpga new device id
All have been in linux-next with no reported problems"
* tag 'char-misc-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
slimbus: qcom-ngd-ctrl: Add timeout for wait operation
dyndbg: fix old BUG_ON in >control parser
misc/pvpanic-pci: register attributes via pci_driver
fpga: dfl-pci: add PCI subdevice ID for Intel D5005 card
mei: me: add lunar lake point M DID
mei: pxp: match against PCI_CLASS_DISPLAY_OTHER
iio:imu: adis16475: Fix sync mode setting
iio: accel: mxc4005: Reset chip on probe() and resume()
iio: accel: mxc4005: Interrupt handling fixes
dt-bindings: iio: health: maxim,max30102: fix compatible check
iio: pressure: Fixes SPI support for BMP3xx devices
iio: pressure: Fixes BME280 SPI driver data
Here are some small USB driver fixes for reported problems for 6.9-rc7.
Included in here are:
- usb core fixes for found issues
- typec driver fixes for reported problems
- usb gadget driver fixes for reported problems
- xhci build fixes
- dwc3 driver fixes for reported issues
All of these have been in linux-next this past week with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZjdEhQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylZ0wCgpMcwSdBww3xH3JHwYjukeW8EPKYAn3N3CBb+
s/e/cETFHgg8RpWq38Sy
=/6D3
-----END PGP SIGNATURE-----
Merge tag 'usb-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes for reported problems for
6.9-rc7. Included in here are:
- usb core fixes for found issues
- typec driver fixes for reported problems
- usb gadget driver fixes for reported problems
- xhci build fixes
- dwc3 driver fixes for reported issues
All of these have been in linux-next this past week with no reported
problems"
* tag 'usb-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: tcpm: Check for port partner validity before consuming it
usb: typec: tcpm: enforce ready state when queueing alt mode vdm
usb: typec: tcpm: unregister existing source caps before re-registration
usb: typec: tcpm: clear pd_event queue in PORT_RESET
usb: typec: tcpm: queue correct sop type in tcpm_queue_vdm_unlocked
usb: Fix regression caused by invalid ep0 maxpacket in virtual SuperSpeed device
usb: ohci: Prevent missed ohci interrupts
usb: typec: qcom-pmic: fix pdphy start() error handling
usb: typec: qcom-pmic: fix use-after-free on late probe errors
usb: gadget: f_fs: Fix a race condition when processing setup packets.
USB: core: Fix access violation during port device removal
usb: dwc3: core: Prevent phy suspend during init
usb: xhci-plat: Don't include xhci.h
usb: gadget: uvc: use correct buffer size when parsing configfs lists
usb: gadget: composite: fix OS descriptors w_value logic
usb: gadget: f_fs: Fix race between aio_cancel() and AIO request complete
- a new ID for ASUS ROG RAIKIRI controllers added to xpad driver
- amimouse driver structure annotated with __refdata to prevent section
mismatch warnings.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZjb8AwAKCRBAj56VGEWX
nEyMAP99BLxJkuEq6nyiHuAvXUpDAX/unCZmsCyt/p5Q2dEfGgEAoDn1Al+0EIb4
yLqu6IeHPh7YGQ/oS0CFJYrZeURyzwY=
=oso0
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a new ID for ASUS ROG RAIKIRI controllers added to xpad driver
- amimouse driver structure annotated with __refdata to prevent section
mismatch warnings.
* tag 'input-for-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: amimouse - mark driver struct with __refdata to prevent section mismatch
Input: xpad - add support for ASUS ROG RAIKIRI
- probe-events: Fix memory leak in parsing probe argument. There is a
memory leak (forget to free an allocated buffer) in a memory allocation
failure path. Fixes it to jump to the correct error handling code.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmY2NRQbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bIacH/RmSQaraWiwQmMaWT8Pp
wotOxtMYnl2uLNeVx3vn55+G1Xr/rJP3E9EBGTa+HMPky3trea07eBM5B3UnwT2y
Y75Nhm6z3SFaLBygdKmQZgyIJF1W9w6J1cfqPwPlfR3h08a/9rNojd/DKBo7fLjk
uwGAUHsB6sNhTvRF64wtr+I7V+8CGwNnApyQvf/mLnHsELerzm86nxDhXcfIvb1P
UbM4nupqrV3QYCLYdXmma34PFFJzS3ioINGn692QtHFOSEdSwJfqsNv6AU/w98zD
8o2rlSadc64Yl74vMLFRtBVS3K49VQXNgUUXjx2Gpj9/v80qn+B41HwaNSl1Lagx
lIY=
=tob5
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fix from Masami Hiramatsu:
- probe-events: Fix memory leak in parsing probe argument.
There is a memory leak (forget to free an allocated buffer) in a
memory allocation failure path. Fix it to jump to the correct error
handling code.
* tag 'probes-fixes-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/probes: Fix memory leak in traceprobe_parse_probe_arg_body()
- Fix RCU callback of freeing an eventfs_inode.
The freeing of the eventfs_inode from the kref going to zero
freed the contents of the eventfs_inode and then used kfree_rcu()
to free the inode itself. But the contents should also be protected
by RCU. Switch to a call_rcu() that calls a function to free all
of the eventfs_inode after the RCU synchronization.
- The tracing subsystem maps its own descriptor to a file represented by
eventfs. The freeing of this descriptor needs to know when the
last reference of an eventfs_inode is released, but currently
there is no interface for that. Add a "release" callback to
the eventfs_inode entry array that allows for freeing of data
that can be referenced by the eventfs_inode being opened.
Then increment the ref counter for this descriptor when the
eventfs_inode file is created, and decrement/free it when the
last reference to the eventfs_inode is released and the file
is removed. This prevents races between freeing the descriptor
and the opening of the eventfs file.
- Fix the permission processing of eventfs.
The change to make the permissions of eventfs default to the mount
point but keep track of when changes were made had a side effect
that could cause security concerns. When the tracefs is remounted
with a given gid or uid, all the files within it should inherit
that gid or uid. But if the admin had changed the permission of
some file within the tracefs file system, it would not get updated
by the remount. This caused the kselftest of file permissions
to fail the second time it is run. The first time, all changes
would look fine, but the second time, because the changes were
"saved", the remount did not reset them.
Create a link list of all existing tracefs inodes, and clear the
saved flags on them on a remount if the remount changes the
corresponding gid or uid fields.
This also simplifies the code by removing the distinction between the
toplevel eventfs and an instance eventfs. They should both act the
same. They were different because of a misconception due to the
remount not resetting the flags. Now that remount resets all the
files and directories to default to the root node if a uid/gid is
specified, it makes the logic simpler to implement.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZjXxzxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qqzGAQCX8g7gtngGgwSsWqPW5GmecCifwFja
k7cVEDhMYPnDeAEAkYi2ZBgJRkPsWPfMRClDK/DXP4woOo58asxtIxfTMgg=
=mCkt
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.9-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing and tracefs fixes from Steven Rostedt:
- Fix RCU callback of freeing an eventfs_inode.
The freeing of the eventfs_inode from the kref going to zero freed
the contents of the eventfs_inode and then used kfree_rcu() to free
the inode itself. But the contents should also be protected by RCU.
Switch to a call_rcu() that calls a function to free all of the
eventfs_inode after the RCU synchronization.
- The tracing subsystem maps its own descriptor to a file represented
by eventfs. The freeing of this descriptor needs to know when the
last reference of an eventfs_inode is released, but currently there
is no interface for that.
Add a "release" callback to the eventfs_inode entry array that allows
for freeing of data that can be referenced by the eventfs_inode being
opened. Then increment the ref counter for this descriptor when the
eventfs_inode file is created, and decrement/free it when the last
reference to the eventfs_inode is released and the file is removed.
This prevents races between freeing the descriptor and the opening of
the eventfs file.
- Fix the permission processing of eventfs.
The change to make the permissions of eventfs default to the mount
point but keep track of when changes were made had a side effect that
could cause security concerns. When the tracefs is remounted with a
given gid or uid, all the files within it should inherit that gid or
uid. But if the admin had changed the permission of some file within
the tracefs file system, it would not get updated by the remount.
This caused the kselftest of file permissions to fail the second time
it is run. The first time, all changes would look fine, but the
second time, because the changes were "saved", the remount did not
reset them.
Create a link list of all existing tracefs inodes, and clear the
saved flags on them on a remount if the remount changes the
corresponding gid or uid fields.
This also simplifies the code by removing the distinction between the
toplevel eventfs and an instance eventfs. They should both act the
same. They were different because of a misconception due to the
remount not resetting the flags. Now that remount resets all the
files and directories to default to the root node if a uid/gid is
specified, it makes the logic simpler to implement.
* tag 'trace-v6.9-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
eventfs: Have "events" directory get permissions from its parent
eventfs: Do not treat events directory different than other directories
eventfs: Do not differentiate the toplevel events directory
tracefs: Still use mount point as default permissions for instances
tracefs: Reset permissions on remount if permissions are options
eventfs: Free all of the eventfs_inode after RCU
eventfs/tracing: Add callback for release of an eventfs_inode
- fix the combination of restricted pools and dynamic swiotlb
(Will Deacon)
-----BEGIN PGP SIGNATURE-----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=05zN
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.9-2024-05-04' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
- fix the combination of restricted pools and dynamic swiotlb
(Will Deacon)
* tag 'dma-mapping-6.9-2024-05-04' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: initialise restricted pool list_head when SWIOTLB_DYNAMIC=y
- Avoid a deadlock in the Qualcomm clk driver by making the regulator
which supplies the GDSC optional.
- Restore RPM clks on Qualcomm msm8976 by setting num_clks.
- Fix Allwinner H6 CPU rate changing logic to avoid system crashes by
temporarily reparenting the CPU clk to something that isn't being
changed.
- Set a MIPI PLL min/max rate on Allwinner A64 to fix blank screens on
some devices.
- Revert back to of_match_device() in the Samsung clkout driver to get
the match data based on the parent device's compatible string.
-----BEGIN PGP SIGNATURE-----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=yAwH
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A handful of clk driver fixes:
- Avoid a deadlock in the Qualcomm clk driver by making the regulator
which supplies the GDSC optional
- Restore RPM clks on Qualcomm msm8976 by setting num_clks
- Fix Allwinner H6 CPU rate changing logic to avoid system crashes by
temporarily reparenting the CPU clk to something that isn't being
changed
- Set a MIPI PLL min/max rate on Allwinner A64 to fix blank screens
on some devices
- Revert back to of_match_device() in the Samsung clkout driver to
get the match data based on the parent device's compatible string"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: samsung: Revert "clk: Use device_get_match_data()"
clk: sunxi-ng: a64: Set minimum and maximum rate for PLL-MIPI
clk: sunxi-ng: common: Support minimum and maximum rate
clk: sunxi-ng: h6: Reparent CPUX during PLL CPUX rate change
clk: qcom: smd-rpm: Restore msm8976 num_clk
clk: qcom: gdsc: treat optional supplies as optional
The events directory gets its permissions from the root inode. But this
can cause an inconsistency if the instances directory changes its
permissions, as the permissions of the created directories under it should
inherit the permissions of the instances directory when directories under
it are created.
Currently the behavior is:
# cd /sys/kernel/tracing
# chgrp 1002 instances
# mkdir instances/foo
# ls -l instances/foo
[..]
-r--r----- 1 root lkp 0 May 1 18:55 buffer_total_size_kb
-rw-r----- 1 root lkp 0 May 1 18:55 current_tracer
-rw-r----- 1 root lkp 0 May 1 18:55 error_log
drwxr-xr-x 1 root root 0 May 1 18:55 events
--w------- 1 root lkp 0 May 1 18:55 free_buffer
drwxr-x--- 2 root lkp 0 May 1 18:55 options
drwxr-x--- 10 root lkp 0 May 1 18:55 per_cpu
-rw-r----- 1 root lkp 0 May 1 18:55 set_event
All the files and directories under "foo" has the "lkp" group except the
"events" directory. That's because its getting its default value from the
mount point instead of its parent.
Have the "events" directory make its default value based on its parent's
permissions. That now gives:
# ls -l instances/foo
[..]
-rw-r----- 1 root lkp 0 May 1 21:16 buffer_subbuf_size_kb
-r--r----- 1 root lkp 0 May 1 21:16 buffer_total_size_kb
-rw-r----- 1 root lkp 0 May 1 21:16 current_tracer
-rw-r----- 1 root lkp 0 May 1 21:16 error_log
drwxr-xr-x 1 root lkp 0 May 1 21:16 events
--w------- 1 root lkp 0 May 1 21:16 free_buffer
drwxr-x--- 2 root lkp 0 May 1 21:16 options
drwxr-x--- 10 root lkp 0 May 1 21:16 per_cpu
-rw-r----- 1 root lkp 0 May 1 21:16 set_event
Link: https://lore.kernel.org/linux-trace-kernel/20240502200906.161887248@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 8186fff7ab ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
