After calling dma_map_single(), we must also call dma_mapping_error().
This fixes the following warning when compiling with CONFIG_DMA_API_DEBUG:
[ 311.241478] WARNING: CPU: 0 PID: 428 at kernel/dma/debug.c:1027 check_unmap+0x79c/0x96c
[ 311.249547] DMA-API: mxs-dcp 2280000.crypto: device driver failed to check map error[device address=0x00000000860cb080] [size=32 bytes] [mapped as single]
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2,
and <crypto/sha3.h> contains declarations for SHA-3.
This organization is inconsistent, but more importantly SHA-1 is no
longer considered to be cryptographically secure. So to the extent
possible, SHA-1 shouldn't be grouped together with any of the other SHA
versions, and usage of it should be phased out.
Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and
<crypto/sha2.h>, and make everyone explicitly specify whether they want
the declarations for SHA-1, SHA-2, or both.
This avoids making the SHA-1 declarations visible to files that don't
want anything to do with SHA-1. It also prepares for potentially moving
sha1.h into a new insecure/ or dangerous/ directory.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Even though the mxs-dcp driver implements asynchronous versions of
ecb(aes) and cbc(aes), the fallbacks it allocates are required to be
synchronous. Given that SIMD based software implementations are usually
asynchronous as well, even though they rarely complete asynchronously
(this typically only happens in cases where the request was made from
softirq context, while SIMD was already in use in the task context that
it interrupted), these implementations are disregarded, and either the
generic C version or another table based version implemented in assembler
is selected instead.
Since falling back to synchronous AES is not only a performance issue, but
potentially a security issue as well (due to the fact that table based AES
is not time invariant), let's fix this, by allocating an ordinary skcipher
as the fallback, and invoke it with the completion routine that was given
to the outer request.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The incorrect traversal of the scatterlist, during the linearization phase
lead to computing the hash value of the wrong input buffer.
New implementation uses scatterwalk_map_and_copy()
to address this issue.
Cc: <stable@vger.kernel.org>
Fixes: 15b59e7c37 ("crypto: mxs - Add Freescale MXS DCP driver")
Signed-off-by: Rosioru Dragos <dragos.rosioru@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CRYPTO_TFM_RES_* flags were apparently meant as a way to make the
->setkey() functions provide more information about errors. But these
flags weren't actually being used or tested, and in many cases they
weren't being set correctly anyway. So they've now been removed.
Also, if someone ever actually needs to start better distinguishing
->setkey() errors (which is somewhat unlikely, as this has been unneeded
for a long time), we'd be much better off just defining different return
values, like -EINVAL if the key is invalid for the algorithm vs.
-EKEYREJECTED if the key was rejected by a policy like "no weak keys".
That would be much simpler, less error-prone, and easier to test.
So just remove CRYPTO_TFM_RES_MASK and all the unneeded logic that
propagates these flags around.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 7a7ffe65c8 ("crypto: skcipher - Add top-level skcipher interface")
dated 20 august 2015 introduced the new skcipher API which is supposed to
replace both blkcipher and ablkcipher. While all consumers of the API have
been converted long ago, some producers of the ablkcipher remain, forcing
us to keep the ablkcipher support routines alive, along with the matching
code to expose [a]blkciphers via the skcipher API.
So switch this driver to the skcipher API, allowing us to finally drop the
ablkcipher code in the near future.
Tested-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.
// <smpl>
@@
expression ret;
struct platform_device *E;
@@
ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);
if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>
While we're here, remove braces on if statements that only have one
statement (manually).
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: <linux-crypto@vger.kernel.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 5.3:
API:
- Test shash interface directly in testmgr
- cra_driver_name is now mandatory
Algorithms:
- Replace arc4 crypto_cipher with library helper
- Implement 5 way interleave for ECB, CBC and CTR on arm64
- Add xxhash
- Add continuous self-test on noise source to drbg
- Update jitter RNG
Drivers:
- Add support for SHA204A random number generator
- Add support for 7211 in iproc-rng200
- Fix fuzz test failures in inside-secure
- Fix fuzz test failures in talitos
- Fix fuzz test failures in qat"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (143 commits)
crypto: stm32/hash - remove interruptible condition for dma
crypto: stm32/hash - Fix hmac issue more than 256 bytes
crypto: stm32/crc32 - rename driver file
crypto: amcc - remove memset after dma_alloc_coherent
crypto: ccp - Switch to SPDX license identifiers
crypto: ccp - Validate the the error value used to index error messages
crypto: doc - Fix formatting of new crypto engine content
crypto: doc - Add parameter documentation
crypto: arm64/aes-ce - implement 5 way interleave for ECB, CBC and CTR
crypto: arm64/aes-ce - add 5 way interleave routines
crypto: talitos - drop icv_ool
crypto: talitos - fix hash on SEC1.
crypto: talitos - move struct talitos_edesc into talitos.h
lib/scatterlist: Fix mapping iterator when sg->offset is greater than PAGE_SIZE
crypto/NX: Set receive window credits to max number of CRBs in RxFIFO
crypto: asymmetric_keys - select CRYPTO_HASH where needed
crypto: serpent - mark __serpent_setkey_sbox noinline
crypto: testmgr - dynamically allocate crypto_shash
crypto: testmgr - dynamically allocate testvec_config
crypto: talitos - eliminate unneeded 'done' functions at build time
...
Use devm_platform_ioremap_resource() to simplify the code a bit.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Based on 1 normalized pattern(s):
the code contained herein is licensed under the gnu general public
license you may obtain a copy of the gnu general public license
version 2 or later at the following locations http www opensource
org licenses gpl license html http www gnu org copyleft gpl html
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 161 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.383790741@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/crypto/mxs-dcp.c: In function 'dcp_chan_thread_sha':
drivers/crypto/mxs-dcp.c:707:11: warning:
variable 'fini' set but not used [-Wunused-but-set-variable]
It's not used since commit d80771c083 ("crypto: mxs-dcp - Fix wait
logic on chan threads"),so can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'err' is set in err path, but it's not returned to callers.
Don't always return -EINPROGRESS, return err.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On 6ull and 6sll the DCP block has a clock which needs to be explicitly
enabled.
Add minimal handling for this at probe/remove time.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes the following sparse warnings:
drivers/crypto/mxs-dcp.c:39:15: warning:
symbol 'sha1_null_hash' was not declared. Should it be static?
drivers/crypto/mxs-dcp.c:43:15: warning:
symbol 'sha256_null_hash' was not declared. Should it be static?
Fixes: c709eebaf5 ("crypto: mxs-dcp - Fix SHA null hashes and output length")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The DCP driver does not obey cryptlen, when doing android CTS this
results in passing to hardware input stream lengths which are not
multiple of block size.
Add a check to prevent future erroneous stream lengths from reaching the
hardware and adjust the scatterlist walking code to obey cryptlen.
Also properly copy-out the IV for chaining.
Signed-off-by: Radu Solea <radu.solea@nxp.com>
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
DCP writes at least 32 bytes in the output buffer instead of hash length
as documented. Add intermediate buffer to prevent write out of bounds.
When requested to produce null hashes DCP fails to produce valid output.
Add software workaround to bypass hardware and return valid output.
Signed-off-by: Radu Solea <radu.solea@nxp.com>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The mxs-dcp driver fails to probe if sha1/sha256 are supported:
[ 2.455404] mxs-dcp 80028000.dcp: Failed to register sha1 hash!
[ 2.464042] mxs-dcp: probe of 80028000.dcp failed with error -22
This happens because since commit 8996eafdcb ("crypto: ahash - ensure
statesize is non-zero") import/export is mandatory and ahash_prepare_alg
fails on statesize == 0.
A set of dummy import/export functions were implemented in commit
9190b6fd5d ("crypto: mxs-dcp - Add empty hash export and import") but
statesize is still zero and the driver fails to probe. That change was
apparently part of some unrelated refactoring.
Fix by actually implementing import/export.
Signed-off-by: Dan Douglass <dan.douglass@nxp.com>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the quest to remove all stack VLA usage from the kernel[1], this
replaces struct crypto_skcipher and SKCIPHER_REQUEST_ON_STACK() usage
with struct crypto_sync_skcipher and SYNC_SKCIPHER_REQUEST_ON_STACK(),
which uses a fixed stack size.
[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When compiling with CONFIG_DEBUG_ATOMIC_SLEEP=y the mxs-dcp driver
prints warnings such as:
WARNING: CPU: 0 PID: 120 at kernel/sched/core.c:7736 __might_sleep+0x98/0x9c
do not call blocking ops when !TASK_RUNNING; state=1 set at [<8081978c>] dcp_chan_thread_sha+0x3c/0x2ec
The problem is that blocking ops will manipulate current->state
themselves so it is not allowed to call them between
set_current_state(TASK_INTERRUPTIBLE) and schedule().
Fix this by converting the per-chan mutex to a spinlock (it only
protects tiny list ops anyway) and rearranging the wait logic so that
callbacks are called current->state as TASK_RUNNING. Those callbacks
will indeed call blocking ops themselves so this is required.
Cc: <stable@vger.kernel.org>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Crypto framework requires export/import in async hash. If driver do not
implement them, wrapper functions in framework will be used, and it will
cause error during ahash alg registration (unless one disables crypto
internal tests). To make change in framework and expose this requirement,
I will remove wrappers from crypto/ahash.c , but this can broke code which
depends on them. Add empty hash export and import, with the same behaviour
as in framework and expose this directly in driver. This can also prevent
OOPS when config option in Cryptographic API 'Disable run-time self tests'
will be enabled.
Signed-off-by: Kamil Konieczny <k.konieczny@partner.samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Print error message on platform_get_irq failure before return.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
return type of wait_for_completion_timeout is unsigned long not int, this
patch changes the type of ret from int to unsigned long.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Optimize the hashing operation in the MXS-DCP by doing two adjustments:
1) Given that the output buffer for the hash is now always correctly aligned,
we can just use the buffer for the DCP DMA to store the resulting hash.
We thus get rid of one copying of data. Moreover, we remove an entry from
dcp_coherent_block{} and thus lower the memory footprint of the driver.
2) We map the output buffer for the hash for DMA only in case we will output
the hash, not always, as it was now.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The DCP needs the bounce buffers, DMA descriptors and result buffers aligned
to 64 bytes (yet another hardware limitation). Make sure they are aligned by
properly aligning the structure which contains them during allocation.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We should test the error case for each platform_get_irq() assignment and
propagate the error accordingly.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
stmp_reset_block() may fail, so check its return value and propagate it in the
case of error.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Using devm_kzalloc() can make the code cleaner.
While at it, remove the devm_kzalloc error message as there is standard OOM
message done by the core.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the AES operation type and mode from async crypto context to
crypto request context. This allows for recycling of the async crypto
context for different kinds of operations.
I found this problem when I used dm-crypt, which uses the same async
crypto context (actx) for both encryption and decryption requests.
Since the requests are enqueued into the processing queue, immediatelly
storing the type of operation into async crypto context (actx) caused
corruption of this information when encryption and decryption operations
followed imediatelly one after the other. When the first operation was
dequeued, the second operation was already enqueued and overwritten the
type of operation in actx, thus causing incorrect result of the first
operation.
Fix this problem by storing the type of operation into the crypto request
context.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes the following sparse warning:
drivers/crypto/mxs-dcp.c:103:1: warning:
symbol 'global_mutex' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for the MXS DCP block. The driver currently supports
SHA-1/SHA-256 hashing and AES-128 CBC/ECB modes. The non-standard
CRC32 is not yet supported.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
