These methods indirect the actual DAX read/write path. In the end pmem
uses magic flush and mc safe variants and fuse and dcssblk use plain ones
while device mapper picks redirects to the underlying device.
Add set_dax_nocache() and set_dax_nomc() APIs to control which copy
routines are used to remove indirect call from the read/write fast path
as well as a lot of boilerplate code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com> [virtiofs]
Link: https://lore.kernel.org/r/20211215084508.435401-5-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Remove the last user of ->bdev in dax.c by requiring the file system to
pass in an address that already includes the DAX offset. As part of the
only set ->bdev or ->daxdev when actually required in the ->iomap_begin
methods.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> [erofs]
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-27-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add a flag so that the file system can easily detect DAX operations
based just on the iomap operation requested instead of looking at
inode state using IS_DAX. This will be needed to apply the to be
added partition offset only for operations that actually use DAX,
but not things like fiemap that are based on the block device.
In the long run it should also allow turning the bdev, dax_dev
and inline_data into a union.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-25-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Unshare the DAX and iomap buffered I/O page zeroing code. This code
previously did a IS_DAX check deep inside the iomap code, which in
fact was the only DAX check in the code. Instead move these checks
into the callers. Most callers already have DAX special casing anyway
and XFS will need it for reflink support as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-19-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Factor out a helper for the "manual" zeroing of a DAX range to clean
up dax_iomap_zero a lot.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-18-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The file relative offset must have the same alignment as the storage
offset, so use that and get rid of the call to iomap_sector.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-17-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Replace the two steps of dax_iomap_sector and bdev_dax_pgoff with a
single dax_iomap_pgoff helper that avoids lots of cumbersome sector
conversions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-15-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Just pass the vm_fault and iomap_iter structures, and figure out the rest
locally. Note that this requires moving dax_iomap_sector up in the file.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-14-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Despite its name copy_user_page expected kernel addresses, which is what
we already have.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-13-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
- Simplify the bio_end_page usage in the buffered IO code.
- Support reading inline data at nonzero offsets for erofs.
- Fix some typos and bad grammar.
- Convert kmap_atomic usage in the inline data read path.
- Add some extra inline data input checking.
- Fix a memory corruption bug stemming from iomap_swapfile_activate
trying to activate more pages than mm was expecting.
- Pass errnos through the page writeback code so that writeback errors
are reported correctly instead of being munged to EIO.
- Replace iomap_apply with a open-coded iterator loops to reduce the
number of indirect calls by a third to a half.
- Refactor the fsdax code to use iomap iterators instead of the
open-coded iomap_apply code that it had before.
- Format file range iomap tracepoint data in hexadecimal and
standardize the names used in the pretty-print string.
-----BEGIN PGP SIGNATURE-----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=iVns
-----END PGP SIGNATURE-----
Merge tag 'iomap-5.15-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap updates from Darrick Wong:
"The most notable externally visible change for this cycle is the
addition of support for reads to inline tail fragments of files, which
was requested by the erofs developers; and a correction for a kernel
memory corruption bug if the sysadmin tries to activate a swapfile
with more pages than the swapfile header suggests.
We also now report writeback completion errors to the file mapping
correctly, instead of munging all errors into EIO.
Internally, the bulk of the changes are Christoph's patchset to reduce
the indirect function call count by a third to a half by converting
iomap iteration from a loop pattern to a generator/consumer pattern.
As an added bonus, fsdax no longer open-codes iomap apply loops.
Summary:
- Simplify the bio_end_page usage in the buffered IO code.
- Support reading inline data at nonzero offsets for erofs.
- Fix some typos and bad grammar.
- Convert kmap_atomic usage in the inline data read path.
- Add some extra inline data input checking.
- Fix a memory corruption bug stemming from iomap_swapfile_activate
trying to activate more pages than mm was expecting.
- Pass errnos through the page writeback code so that writeback
errors are reported correctly instead of being munged to EIO.
- Replace iomap_apply with a open-coded iterator loops to reduce the
number of indirect calls by a third to a half.
- Refactor the fsdax code to use iomap iterators instead of the
open-coded iomap_apply code that it had before.
- Format file range iomap tracepoint data in hexadecimal and
standardize the names used in the pretty-print string"
* tag 'iomap-5.15-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (41 commits)
iomap: standardize tracepoint formatting and storage
mm/swap: consider max pages in iomap_swapfile_add_extent
iomap: move loop control code to iter.c
iomap: constify iomap_iter_srcmap
fsdax: switch the fault handlers to use iomap_iter
fsdax: factor out a dax_fault_actor() helper
fsdax: factor out helpers to simplify the dax fault code
iomap: rework unshare flag
iomap: pass an iomap_iter to various buffered I/O helpers
iomap: remove iomap_apply
fsdax: switch dax_iomap_rw to use iomap_iter
iomap: switch iomap_swapfile_activate to use iomap_iter
iomap: switch iomap_seek_data to use iomap_iter
iomap: switch iomap_seek_hole to use iomap_iter
iomap: switch iomap_bmap to use iomap_iter
iomap: switch iomap_fiemap to use iomap_iter
iomap: switch __iomap_dio_rw to use iomap_iter
iomap: switch iomap_page_mkwrite to use iomap_iter
iomap: switch iomap_zero_range to use iomap_iter
iomap: switch iomap_file_unshare to use iomap_iter
...
Avoid the open coded calls to ->iomap_begin and ->iomap_end and call
iomap_iter instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The core logic in the two dax page fault functions is similar. So, move
the logic into a common helper function. Also, to facilitate the
addition of new features, such as CoW, switch-case is no longer used to
handle different iomap types.
Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The dax page fault code is too long and a bit difficult to read. And it
is hard to understand when we trying to add new features. Some of the
PTE/PMD codes have similar logic. So, factor out helper functions to
simplify the code.
Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
[hch: minor cleanups]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Switch the dax_iomap_rw implementation to use iomap_iter.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
dax_direct_access() takes a number of pages. PHYS_PFN(PAGE_SIZE) is a
very round about way to specify '1'.
Change the nr_pages parameter to the explicit value of '1'.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20210525172428.3634316-3-ira.weiny@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
grab_mapping_entry() has a bug in handling of ENOMEM condition. Suppose
we have a PMD entry at index i which we are downgrading to a PTE entry.
grab_mapping_entry() will set pmd_downgrade to true, lock the entry, clear
the entry in xarray, and decrement mapping->nrpages. The it will call:
entry = dax_make_entry(pfn_to_pfn_t(0), flags);
dax_lock_entry(xas, entry);
which inserts new PTE entry into xarray. However this may fail allocating
the new node. We handle this by:
if (xas_nomem(xas, mapping_gfp_mask(mapping) & ~__GFP_HIGHMEM))
goto retry;
however pmd_downgrade stays set to true even though 'entry' returned from
get_unlocked_entry() will be NULL now. And we will go again through the
downgrade branch. This is mostly harmless except that mapping->nrpages is
decremented again and we temporarily have an invalid entry stored in
xarray. Fix the problem by setting pmd_downgrade to false each time we
lookup the entry we work with so that it matches the entry we found.
Link: https://lkml.kernel.org/r/20210622160015.18004-1-jack@suse.cz
Fixes: b15cd80068 ("dax: Convert page fault handlers to XArray")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Fix a hang condition (missed wakeups with virtiofs when invalidating
entries)
-----BEGIN PGP SIGNATURE-----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=cWwB
-----END PGP SIGNATURE-----
Merge tag 'dax-fixes-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull dax fixes from Dan Williams:
"A fix for a hang condition due to missed wakeups in the filesystem-dax
core when exercised by virtiofs.
This bug has been there from the beginning, but the condition has
not triggered on other filesystems since they hold a lock over
invalidation events"
* tag 'dax-fixes-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: Wake up all waiters after invalidating dax entry
dax: Add a wakeup mode parameter to put_unlocked_entry()
dax: Add an enum for specifying dax wakup mode
I am seeing missed wakeups which ultimately lead to a deadlock when I am
using virtiofs with DAX enabled and running "make -j". I had to mount
virtiofs as rootfs and also reduce to dax window size to 256M to reproduce
the problem consistently.
So here is the problem. put_unlocked_entry() wakes up waiters only
if entry is not null as well as !dax_is_conflict(entry). But if I
call multiple instances of invalidate_inode_pages2() in parallel,
then I can run into a situation where there are waiters on
this index but nobody will wake these waiters.
invalidate_inode_pages2()
invalidate_inode_pages2_range()
invalidate_exceptional_entry2()
dax_invalidate_mapping_entry_sync()
__dax_invalidate_entry() {
xas_lock_irq(&xas);
entry = get_unlocked_entry(&xas, 0);
...
...
dax_disassociate_entry(entry, mapping, trunc);
xas_store(&xas, NULL);
...
...
put_unlocked_entry(&xas, entry);
xas_unlock_irq(&xas);
}
Say a fault in in progress and it has locked entry at offset say "0x1c".
Now say three instances of invalidate_inode_pages2() are in progress
(A, B, C) and they all try to invalidate entry at offset "0x1c". Given
dax entry is locked, all tree instances A, B, C will wait in wait queue.
When dax fault finishes, say A is woken up. It will store NULL entry
at index "0x1c" and wake up B. When B comes along it will find "entry=0"
at page offset 0x1c and it will call put_unlocked_entry(&xas, 0). And
this means put_unlocked_entry() will not wake up next waiter, given
the current code. And that means C continues to wait and is not woken
up.
This patch fixes the issue by waking up all waiters when a dax entry
has been invalidated. This seems to fix the deadlock I am facing
and I can make forward progress.
Reported-by: Sergio Lopez <slp@redhat.com>
Fixes: ac401cc782 ("dax: New fault locking")
Reviewed-by: Jan Kara <jack@suse.cz>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Link: https://lore.kernel.org/r/20210428190314.1865312-4-vgoyal@redhat.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
As of now put_unlocked_entry() always wakes up next waiter. In next
patches we want to wake up all waiters at one callsite. Hence, add a
parameter to the function.
This patch does not introduce any change of behavior.
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Link: https://lore.kernel.org/r/20210428190314.1865312-3-vgoyal@redhat.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan mentioned that he is not very fond of passing around a boolean true/false
to specify if only next waiter should be woken up or all waiters should be
woken up. He instead prefers that we introduce an enum and make it very
explicity at the callsite itself. Easier to read code.
This patch should not introduce any change of behavior.
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Link: https://lore.kernel.org/r/20210428190314.1865312-2-vgoyal@redhat.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Patch series "Remove nrexceptional tracking", v2.
We actually use nrexceptional for very little these days. It's a minor
pain to keep in sync with nrpages, but the pain becomes much bigger with
the THP patches because we don't know how many indices a shadow entry
occupies. It's easier to just remove it than keep it accurate.
Also, we save 8 bytes per inode which is nothing to sneeze at; on my
laptop, it would improve shmem_inode_cache from 22 to 23 objects per
16kB, and inode_cache from 26 to 27 objects. Combined, that saves
a megabyte of memory from a combined usage of 25MB for both caches.
Unfortunately, ext4 doesn't cross a magic boundary, so it doesn't save
any memory for ext4.
This patch (of 4):
Instead of checking the two counters (nrpages and nrexceptional), we can
just check whether i_pages is empty.
Link: https://lkml.kernel.org/r/20201026151849.24232-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20201026151849.24232-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Vishal Verma <vishal.l.verma@intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, the follow_pfn function is exported for modules but
follow_pte is not. However, follow_pfn is very easy to misuse,
because it does not provide protections (so most of its callers
assume the page is writable!) and because it returns after having
already unlocked the page table lock.
Provide instead a simplified version of follow_pte that does
not have the pmdpp and range arguments. The older version
survives as follow_invalidate_pte() for use by fs/dax.c.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Merge __follow_pte_pmd, follow_pte_pmd and follow_pte into a single
follow_pte function and just pass two additional NULL arguments for the
two previous follow_pte callers.
[sfr@canb.auug.org.au: merge fix for "s390/pci: remove races against pte updates"]
Link: https://lkml.kernel.org/r/20201111221254.7f6a3658@canb.auug.org.au
Link: https://lkml.kernel.org/r/20201029101432.47011-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCX4n0/gAKCRDh3BK/laaZ
PM3jAP4xhaix0j/y3VyaxsUqWg6ZSrjq6X0o9clGMJv27IAtjgD/fJ7ZwzTldojD
qb7N3utjLiPVRjwFmvsZ8JZ7O7PbwQ0=
=oUbZ
-----END PGP SIGNATURE-----
Merge tag 'fuse-update-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Support directly accessing host page cache from virtiofs. This can
improve I/O performance for various workloads, as well as reducing
the memory requirement by eliminating double caching. Thanks to Vivek
Goyal for doing most of the work on this.
- Allow automatic submounting inside virtiofs. This allows unique
st_dev/ st_ino values to be assigned inside the guest to files
residing on different filesystems on the host. Thanks to Max Reitz
for the patches.
- Fix an old use after free bug found by Pradeep P V K.
* tag 'fuse-update-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (25 commits)
virtiofs: calculate number of scatter-gather elements accurately
fuse: connection remove fix
fuse: implement crossmounts
fuse: Allow fuse_fill_super_common() for submounts
fuse: split fuse_mount off of fuse_conn
fuse: drop fuse_conn parameter where possible
fuse: store fuse_conn in fuse_req
fuse: add submount support to <uapi/linux/fuse.h>
fuse: fix page dereference after free
virtiofs: add logic to free up a memory range
virtiofs: maintain a list of busy elements
virtiofs: serialize truncate/punch_hole and dax fault path
virtiofs: define dax address space operations
virtiofs: add DAX mmap support
virtiofs: implement dax read/write operations
virtiofs: introduce setupmapping/removemapping commands
virtiofs: implement FUSE_INIT map_alignment field
virtiofs: keep a list of free dax memory ranges
virtiofs: add a mount option to enable dax
virtiofs: set up virtio_fs dax_device
...
Pass the full length to iomap_zero() and dax_iomap_zero(), and have
them return how many bytes they actually handled. This is preparatory
work for handling THP, although it looks like DAX could actually take
advantage of it if there's a larger contiguous area.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
virtiofs device has a range of memory which is mapped into file inodes
using dax. This memory is mapped in qemu on host and maps different
sections of real file on host. Size of this memory is limited
(determined by administrator) and depending on filesystem size, we will
soon reach a situation where all the memory is in use and we need to
reclaim some.
As part of reclaim process, we will need to make sure that there are
no active references to pages (taken by get_user_pages()) on the memory
range we are trying to reclaim. I am planning to use
dax_layout_busy_page() for this. But in current form this is per inode
and scans through all the pages of the inode.
We want to reclaim only a portion of memory (say 2MB page). So we want
to make sure that only that 2MB range of pages do not have any
references (and don't want to unmap all the pages of inode).
Hence, create a range version of this function named
dax_layout_busy_page_range() which can be used to pass a range which
needs to be unmapped.
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: linux-nvdimm@lists.01.org
Cc: Jan Kara <jack@suse.cz>
Cc: Vishal L Verma <vishal.l.verma@intel.com>
Cc: "Weiny, Ira" <ira.weiny@intel.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The argument passed to xas_set_err() to indicate an error should be negative.
Otherwise, xas_error() will return 0, and grab_mapping_entry() will return the
found entry instead of 'SIGBUS' when the entry is not in fact valid.
This would result in problems in subsequent code paths.
Link: https://lore.kernel.org/r/20200729034436.24267-1-lihao2018.fnst@cn.fujitsu.com
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: Hao Li <lihao2018.fnst@cn.fujitsu.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Passing size to copy_user_dax implies it can copy variable sizes of data
when in fact it calls copy_user_page() which is exactly a page.
We are safe because the only caller uses PAGE_SIZE anyway so just remove
the variable for clarity.
While we are at it change copy_user_dax() to copy_cow_page_dax() to make
it clear it is a singleton helper for this one case not implementing
what dax_iomap_actor() does.
Link: https://lore.kernel.org/r/20200717072056.73134-11-ira.weiny@intel.com
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Add a helper dax_ioamp_zero() to zero a range. This patch basically
merges __dax_zero_page_range() and iomap_dax_zero().
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20200228163456.1587-7-vgoyal@redhat.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Use new dax native zero page method for zeroing page if I/O is page
aligned. Otherwise fall back to direct_access() + memcpy().
This gets rid of one of the depenendency on block device in dax path.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Link: https://lore.kernel.org/r/20200228163456.1587-6-vgoyal@redhat.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
fstests generic/471 reports a failure when run with MOUNT_OPTIONS="-o
dax". The reason is that the initial pwrite to an empty file with the
RWF_NOWAIT flag set does not return -EAGAIN. It turns out that
dax_iomap_rw doesn't pass that flag through to iomap_apply.
With this patch applied, generic/471 passes for me.
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/x49r1z86e1d.fsf@segfault.boston.devel.redhat.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
As of now dax_writeback_mapping_range() takes "struct block_device" as a
parameter and dax_dev is searched from bdev name. This also involves taking
a fresh reference on dax_dev and putting that reference at the end of
function.
We are developing a new filesystem virtio-fs and using dax to access host
page cache directly. But there is no block device. IOW, we want to make
use of dax but want to get rid of this assumption that there is always
a block device associated with dax_dev.
So pass in "struct dax_device" as parameter instead of bdev.
ext2/ext4/xfs are current users and they already have a reference on
dax_device. So there is no need to take reference and drop reference to
dax_device on each call of this function.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Link: https://lore.kernel.org/r/20200103183307.GB13350@redhat.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
- Make iomap_dio_rw callers explicitly tell us if they want us to wait
- Port the xfs writeback code to iomap to complete the buffered io
library functions
- Refactor the unshare code to share common pieces
- Add support for performing copy on write with buffered writes
- Other minor fixes
- Fix unchecked return in iomap_bmap
- Fix a type casting bug in a ternary statement in iomap_dio_bio_actor
- Improve tracepoints for easier diagnostic ability
- Fix pipe page leakage in directio reads
-----BEGIN PGP SIGNATURE-----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=FRl4
-----END PGP SIGNATURE-----
Merge tag 'iomap-5.5-merge-11' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap updates from Darrick Wong:
"In this release, we hoisted as much of XFS' writeback code into iomap
as was practicable, refactored the unshare file data function, added
the ability to perform buffered io copy on write, and tweaked various
parts of the directio implementation as needed to port ext4's directio
code (that will be a separate pull).
Summary:
- Make iomap_dio_rw callers explicitly tell us if they want us to
wait
- Port the xfs writeback code to iomap to complete the buffered io
library functions
- Refactor the unshare code to share common pieces
- Add support for performing copy on write with buffered writes
- Other minor fixes
- Fix unchecked return in iomap_bmap
- Fix a type casting bug in a ternary statement in
iomap_dio_bio_actor
- Improve tracepoints for easier diagnostic ability
- Fix pipe page leakage in directio reads"
* tag 'iomap-5.5-merge-11' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (31 commits)
iomap: Fix pipe page leakage during splicing
iomap: trace iomap_appply results
iomap: fix return value of iomap_dio_bio_actor on 32bit systems
iomap: iomap_bmap should check iomap_apply return value
iomap: Fix overflow in iomap_page_mkwrite
fs/iomap: remove redundant check in iomap_dio_rw()
iomap: use a srcmap for a read-modify-write I/O
iomap: renumber IOMAP_HOLE to 0
iomap: use write_begin to read pages to unshare
iomap: move the zeroing case out of iomap_read_page_sync
iomap: ignore non-shared or non-data blocks in xfs_file_dirty
iomap: always use AOP_FLAG_NOFS in iomap_write_begin
iomap: remove the unused iomap argument to __iomap_write_end
iomap: better document the IOMAP_F_* flags
iomap: enhance writeback error message
iomap: pass a struct page to iomap_finish_page_writeback
iomap: cleanup iomap_ioend_compare
iomap: move struct iomap_page out of iomap.h
iomap: warn on inline maps in iomap_writepage_map
iomap: lift the xfs writeback code to iomap
...
Users reported a v5.3 performance regression and inability to establish
huge page mappings. A revised version of the ndctl "dax.sh" huge page
unit test identifies commit 23c84eb783 "dax: Fix missed wakeup with
PMD faults" as the source.
Update get_unlocked_entry() to check for NULL entries before checking
the entry order, otherwise NULL is misinterpreted as a present pte
conflict. The 'order' check needs to happen before the locked check as
an unlocked entry at the wrong order must fallback to lookup the correct
order.
Reported-by: Jeff Smits <jeff.smits@intel.com>
Reported-by: Doug Nelson <doug.nelson@intel.com>
Cc: <stable@vger.kernel.org>
Fixes: 23c84eb783 ("dax: Fix missed wakeup with PMD faults")
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Link: https://lore.kernel.org/r/157167532455.3945484.11971474077040503994.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The srcmap is used to identify where the read is to be performed from.
It is passed to ->iomap_begin, which can fill it in if we need to read
data for partially written blocks from a different location than the
write target. The srcmap is only supported for buffered writes so far.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
[hch: merged two patches, removed the IOMAP_F_COW flag, use iomap as
srcmap if not set, adjust length down to srcmap end as well]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Vivek:
"As of now dax_layout_busy_page() calls unmap_mapping_range() with last
argument as 1, which says even unmap cow pages. I am wondering who needs
to get rid of cow pages as well.
I noticed one interesting side affect of this. I mount xfs with -o dax and
mmaped a file with MAP_PRIVATE and wrote some data to a page which created
cow page. Then I called fallocate() on that file to zero a page of file.
fallocate() called dax_layout_busy_page() which unmapped cow pages as well
and then I tried to read back the data I wrote and what I get is old
data from persistent memory. I lost the data I had written. This
read basically resulted in new fault and read back the data from
persistent memory.
This sounds wrong. Are there any users which need to unmap cow pages
as well? If not, I am proposing changing it to not unmap cow pages.
I noticed this while while writing virtio_fs code where when I tried
to reclaim a memory range and that corrupted the executable and I
was running from virtio-fs and program got segment violation."
Dan:
"In fact the unmap_mapping_range() in this path is only to synchronize
against get_user_pages_fast() and force it to call back into the
filesystem to re-establish the mapping. COW pages should be left
untouched by dax_layout_busy_page()."
Cc: <stable@vger.kernel.org>
Fixes: 5fac7408d8 ("mm, fs, dax: handle layout changes to pinned dax mappings")
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Link: https://lore.kernel.org/r/20190802192956.GA3032@redhat.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The condition checking whether put_unlocked_entry() needs to wake up
following waiter got broken by commit 23c84eb783 ("dax: Fix missed
wakeup with PMD faults"). We need to wake the waiter whenever the passed
entry is valid (i.e., non-NULL and not special conflict entry). This
could lead to processes never being woken up when waiting for entry
lock. Fix the condition.
Cc: <stable@vger.kernel.org>
Link: http://lore.kernel.org/r/20190729120228.GC17833@quack2.suse.cz
Fixes: 23c84eb783 ("dax: Fix missed wakeup with PMD faults")
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
- Regroup the fs/iomap.c code by major functional area so that we can
start development for 5.4 from a more stable base.
-----BEGIN PGP SIGNATURE-----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=3uGR
-----END PGP SIGNATURE-----
Merge tag 'iomap-5.3-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap split/cleanup from Darrick Wong:
"As promised, here's the second part of the iomap merge for 5.3, in
which we break up iomap.c into smaller files grouped by functional
area so that it'll be easier in the long run to maintain cohesiveness
of code units and to review incoming patches. There are no functional
changes and fs/iomap.c split cleanly.
Summary:
- Regroup the fs/iomap.c code by major functional area so that we can
start development for 5.4 from a more stable base"
* tag 'iomap-5.3-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: move internal declarations into fs/iomap/
iomap: move the main iteration code into a separate file
iomap: move the buffered IO code into a separate file
iomap: move the direct IO code into a separate file
iomap: move the SEEK_HOLE code into a separate file
iomap: move the file mapping reporting code into a separate file
iomap: move the swapfile code into a separate file
iomap: start moving code to fs/iomap/
conversion of fsdax in the v4.20 kernel.
- Add a 'resource' (root-only physical base address) sysfs attribute to
device-dax instances to correlate memory-blocks onlined via the kmem
driver with a given device instance.
-----BEGIN PGP SIGNATURE-----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=UB+H
-----END PGP SIGNATURE-----
Merge tag 'dax-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull dax updates from Dan Williams:
"The fruits of a bug hunt in the fsdax implementation with Willy and a
small feature update for device-dax:
- Fix a hang condition that started triggering after the Xarray
conversion of fsdax in the v4.20 kernel.
- Add a 'resource' (root-only physical base address) sysfs attribute
to device-dax instances to correlate memory-blocks onlined via the
kmem driver with a given device instance"
* tag 'dax-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: Fix missed wakeup with PMD faults
device-dax: Add a 'resource' attribute
Move internal function declarations out of fs/internal.h into
include/linux/iomap.h so that our transition is complete.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
RocksDB can hang indefinitely when using a DAX file. This is due to
a bug in the XArray conversion when handling a PMD fault and finding a
PTE entry. We use the wrong index in the hash and end up waiting on
the wrong waitqueue.
There's actually no need to wait; if we find a PTE entry while looking
for a PMD entry, we can return immediately as we know we should fall
back to a PTE fault (which may not conflict with the lock held).
We reuse the XA_RETRY_ENTRY to signal a conflicting entry was found.
This value can never be found in an XArray while holding its lock, so
it does not create an ambiguity.
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/CAPcyv4hwHpX-MkUEqxwdTj7wCCZCN4RV-L4jsnuwLGyL_UEG4A@mail.gmail.com
Fixes: b15cd80068 ("dax: Convert page fault handlers to XArray")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Robert Barror <robert.barror@intel.com>
Reported-by: Seema Pandit <seema.pandit@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pull locking updates from Ingo Molnar:
"The main changes in this cycle are:
- rwsem scalability improvements, phase #2, by Waiman Long, which are
rather impressive:
"On a 2-socket 40-core 80-thread Skylake system with 40 reader
and writer locking threads, the min/mean/max locking operations
done in a 5-second testing window before the patchset were:
40 readers, Iterations Min/Mean/Max = 1,807/1,808/1,810
40 writers, Iterations Min/Mean/Max = 1,807/50,344/151,255
After the patchset, they became:
40 readers, Iterations Min/Mean/Max = 30,057/31,359/32,741
40 writers, Iterations Min/Mean/Max = 94,466/95,845/97,098"
There's a lot of changes to the locking implementation that makes
it similar to qrwlock, including owner handoff for more fair
locking.
Another microbenchmark shows how across the spectrum the
improvements are:
"With a locking microbenchmark running on 5.1 based kernel, the
total locking rates (in kops/s) on a 2-socket Skylake system
with equal numbers of readers and writers (mixed) before and
after this patchset were:
# of Threads Before Patch After Patch
------------ ------------ -----------
2 2,618 4,193
4 1,202 3,726
8 802 3,622
16 729 3,359
32 319 2,826
64 102 2,744"
The changes are extensive and the patch-set has been through
several iterations addressing various locking workloads. There
might be more regressions, but unless they are pathological I
believe we want to use this new implementation as the baseline
going forward.
- jump-label optimizations by Daniel Bristot de Oliveira: the primary
motivation was to remove IPI disturbance of isolated RT-workload
CPUs, which resulted in the implementation of batched jump-label
updates. Beyond the improvement of the real-time characteristics
kernel, in one test this patchset improved static key update
overhead from 57 msecs to just 1.4 msecs - which is a nice speedup
as well.
- atomic64_t cross-arch type cleanups by Mark Rutland: over the last
~10 years of atomic64_t existence the various types used by the
APIs only had to be self-consistent within each architecture -
which means they became wildly inconsistent across architectures.
Mark puts and end to this by reworking all the atomic64
implementations to use 's64' as the base type for atomic64_t, and
to ensure that this type is consistently used for parameters and
return values in the API, avoiding further problems in this area.
- A large set of small improvements to lockdep by Yuyang Du: type
cleanups, output cleanups, function return type and othr cleanups
all around the place.
- A set of percpu ops cleanups and fixes by Peter Zijlstra.
- Misc other changes - please see the Git log for more details"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (82 commits)
locking/lockdep: increase size of counters for lockdep statistics
locking/atomics: Use sed(1) instead of non-standard head(1) option
locking/lockdep: Move mark_lock() inside CONFIG_TRACE_IRQFLAGS && CONFIG_PROVE_LOCKING
x86/jump_label: Make tp_vec_nr static
x86/percpu: Optimize raw_cpu_xchg()
x86/percpu, sched/fair: Avoid local_clock()
x86/percpu, x86/irq: Relax {set,get}_irq_regs()
x86/percpu: Relax smp_processor_id()
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
locking/rwsem: Guard against making count negative
locking/rwsem: Adaptive disabling of reader optimistic spinning
locking/rwsem: Enable time-based spinning on reader-owned rwsem
locking/rwsem: Make rwsem->owner an atomic_long_t
locking/rwsem: Enable readers spinning on writer
locking/rwsem: Clarify usage of owner's nonspinaable bit
locking/rwsem: Wake up almost all readers in wait queue
locking/rwsem: More optimal RT task handling of null owner
locking/rwsem: Always release wait_lock before waking up tasks
locking/rwsem: Implement lock handoff to prevent lock starvation
locking/rwsem: Make rwsem_spin_on_owner() return owner state
...
- Fix xarray entry association for mixed mappings
-----BEGIN PGP SIGNATURE-----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=NNXl
-----END PGP SIGNATURE-----
Merge tag 'dax-fix-5.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull dax fix from Dan Williams:
"A single dax fix that has been soaking awaiting other fixes under
discussion to join it. As it is getting late in the cycle lets proceed
with this fix and save follow-on changes for post-v5.3-rc1.
- Fix xarray entry association for mixed mappings"
* tag 'dax-fix-5.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: Fix xarray entry association for mixed mappings
All callers of lockdep_assert_held_exclusive() use it to verify the
correct locking state of either a semaphore (ldisc_sem in tty,
mmap_sem for perf events, i_rwsem of inode for dax) or rwlock by
apparmor. Thus it makes sense to rename _exclusive to _write since
that's the semantics callers care. Additionally there is already
lockdep_assert_held_read(), which this new naming is more consistent with.
No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190531100651.3969-1-nborisov@suse.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When inserting entry into xarray, we store mapping and index in
corresponding struct pages for memory error handling. When it happened
that one process was mapping file at PMD granularity while another
process at PTE granularity, we could wrongly deassociate PMD range and
then reassociate PTE range leaving the rest of struct pages in PMD range
without mapping information which could later cause missed notifications
about memory errors. Fix the problem by calling the association /
deassociation code if and only if we are really going to update the
xarray (deassociating and associating zero or empty entries is just
no-op so there's no reason to complicate the code with trying to avoid
the calls for these cases).
Cc: <stable@vger.kernel.org>
Fixes: d2c997c0f1 ("fs, dax: use page->mapping to warn if truncate...")
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms and conditions of the gnu general public license
version 2 as published by the free software foundation this program
is distributed in the hope it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 263 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
