Currently extent status tree doesn't cache extent hole when a write
looks up in extent tree to make sure whether a block has been allocated
or not. In this case, we don't put extent hole in extent cache because
later this extent might be removed and a new delayed extent might be
added back. But it will cause a defect when we do a lot of writes. If
we don't put extent hole in extent cache, the following writes also need
to access extent tree to look at whether or not a block has been
allocated. It brings a cache miss. This commit fixes this defect.
Also if the inode doesn't have any extent, this extent hole will be
cached as well.
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
For bigalloc filesystems we have to check whether newly requested inode
block isn't already part of a cluster for which we already have delayed
allocation reservation. This check happens in ext4_ext_map_blocks() and
that function sets EXT4_MAP_FROM_CLUSTER if that's the case. However if
ext4_da_map_blocks() finds in extent cache information about the block,
we don't call into ext4_ext_map_blocks() and thus we always end up
getting new reservation even if the space for cluster is already
reserved. This results in overreservation and premature ENOSPC reports.
Fix the problem by checking for existing cluster reservation already in
ext4_da_map_blocks(). That simplifies the logic and actually allows us
to get rid of the EXT4_MAP_FROM_CLUSTER flag completely.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Convert the ext4_has_group_desc_csum predicate to look for a checksum
driver instead of the metadata_csum flag and change the bg checksum
calculation function to look for GDT_CSUM before taking the crc16
path.
Without this patch, if we mount with ^uninit_bg,^metadata_csum and
later metadata_csum gets turned on by accident, the block group
checksum functions will incorrectly assume that checksumming is
enabled (metadata_csum) but that crc16 should be used
(!s_chksum_driver). This is totally wrong, so fix the predicate
and the checksum formula selection.
(Granted, if the metadata_csum feature bit gets enabled on a live FS
then something underhanded is going on, but we could at least avoid
writing garbage into the on-disk fields.)
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dmitry Monakhov <dmonakhov@openvz.org>
Cc: stable@vger.kernel.org
Besides the fact that this replacement improves code readability
it also protects from errors caused direct EXT4_S(sb)->s_es manipulation
which may result attempt to use uninitialized csum machinery.
#Testcase_BEGIN
IMG=/dev/ram0
MNT=/mnt
mkfs.ext4 $IMG
mount $IMG $MNT
#Enable feature directly on disk, on mounted fs
tune2fs -O metadata_csum $IMG
# Provoke metadata update, likey result in OOPS
touch $MNT/test
umount $MNT
#Testcase_END
# Replacement script
@@
expression E;
@@
- EXT4_HAS_RO_COMPAT_FEATURE(E, EXT4_FEATURE_RO_COMPAT_METADATA_CSUM)
+ ext4_has_metadata_csum(E)
https://bugzilla.kernel.org/show_bug.cgi?id=82201
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
If there is a corrupted file system which has directory entries that
point at reserved, metadata inodes, prohibit them from being used by
treating them the same way we treat Boot Loader inodes --- that is,
mark them to be bad inodes. This prohibits them from being opened,
deleted, or modified via chmod, chown, utimes, etc.
In particular, this prevents a corrupted file system which has a
directory entry which points at the journal inode from being deleted
and its blocks released, after which point Much Hilarity Ensues.
Reported-by: Sami Liedes <sami.liedes@iki.fi>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
MAXQUOTAS value defines maximum number of quota types VFS supports.
This isn't necessarily the number of types ext4 supports. Although
ext4 will support project quotas, use ext4 private definition for
consistency with other filesystems.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Having done a full regression test, we can now drop the
DELALLOC_RESERVED state flag.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
This commit adds some statictics in extent status tree shrinker. The
purpose to add these is that we want to collect more details when we
encounter a stall caused by extent status tree shrinker. Here we count
the following statictics:
stats:
the number of all objects on all extent status trees
the number of reclaimable objects on lru list
cache hits/misses
the last sorted interval
the number of inodes on lru list
average:
scan time for shrinking some objects
the number of shrunk objects
maximum:
the inode that has max nr. of objects on lru list
the maximum scan time for shrinking some objects
The output looks like below:
$ cat /proc/fs/ext4/sda1/es_shrinker_info
stats:
28228 objects
6341 reclaimable objects
5281/631 cache hits/misses
586 ms last sorted interval
250 inodes on lru list
average:
153 us scan time
128 shrunk objects
maximum:
255 inode (255 objects, 198 reclaimable)
125723 us max scan time
If the lru list has never been sorted, the following line will not be
printed:
586ms last sorted interval
If there is an empty lru list, the following lines also will not be
printed:
250 inodes on lru list
...
maximum:
255 inode (255 objects, 198 reclaimable)
0 us max scan time
Meanwhile in this commit a new trace point is defined to print some
details in __ext4_es_shrink().
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Drop EXT4_EX_NOFREE_ON_ERR from ext4_ext_create_new_leaf(),
ext4_split_extent(), ext4_convert_unwritten_extents_endio().
This requires fixing all of their callers to potentially
ext4_ext_find_extent() to free the struct ext4_ext_path object in case
of an error, and there are interlocking dependencies all the way up to
ext4_ext_map_blocks(), ext4_swap_extents(), and
ext4_ext_remove_space().
Once this is done, we can drop the EXT4_EX_NOFREE_ON_ERR flag since it
is no longer necessary.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Right now, there are a places where it is all to easy to leak memory
on an error path, via a usage like this:
struct ext4_ext_path *path = NULL
while (...) {
...
path = ext4_ext_find_extent(inode, block, path, 0);
if (IS_ERR(path)) {
/* oops, if path was non-NULL before the call to
ext4_ext_find_extent, we've leaked it! :-( */
...
return PTR_ERR(path);
}
...
}
Unfortunately, there some code paths where we are doing the following
instead:
path = ext4_ext_find_extent(inode, block, orig_path, 0);
and where it's important that we _not_ free orig_path in the case
where ext4_ext_find_extent() returns an error.
So change the function signature of ext4_ext_find_extent() so that it
takes a struct ext4_ext_path ** for its third argument, and by
default, on an error, it will free the struct ext4_ext_path, and then
zero out the struct ext4_ext_path * pointer. In order to avoid
causing problems, we add a flag EXT4_EX_NOFREE_ON_ERR which causes
ext4_ext_find_extent() to use the original behavior of forcing the
caller to deal with freeing the original path pointer on the error
case.
The goal is to get rid of EXT4_EX_NOFREE_ON_ERR entirely, but this
allows for a gentle transition and makes the patches easier to verify.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit b8a8684502 introduced an accidental flag aliasing between
EXT4_EX_NOCACHE and EXT4_GET_BLOCKS_CONVERT_UNWRITTEN.
Fortunately, this didn't introduce any untorward side effects --- we
got lucky. Nevertheless, fix this and leave a warning to hopefully
avoid this from happening in the future.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_move_extents is too complex for review. It has duplicate almost
each function available in the rest of other codebase. It has useless
artificial restriction orig_offset == donor_offset. But in fact logic
of ext4_move_extents is very simple:
Iterate extents one by one (similar to ext4_fill_fiemap_extents)
->Iterate each page covered extent (similar to generic_perform_write)
->swap extents for covered by page (can be shared with IOC_MOVE_DATA)
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This allows us to make mext_next_extent static and potentially get rid
of it.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If we run into some kind of error, such as ENOMEM, while calling
ext4_getblk() or ext4_dx_find_entry(), we need to make sure this error
gets propagated up to ext4_find_entry() and then to its callers. This
way, transient errors such as ENOMEM can get propagated to the VFS.
This is important so that the system calls return the appropriate
error, and also so that in the case of ext4_lookup(), we return an
error instead of a NULL inode, since that will result in a negative
dentry cache entry that will stick around long past the OOM condition
which caused a transient ENOMEM error.
Google-Bug-Id: #17142205
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Before converting an inline directory to a regular directory, check
the directory entries to make sure they're not obviously broken.
This helps us to avoid a BUG_ON if one of the dirents is trashed.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Now ext4_has_inline_data() is used in wide spread codepaths. So we need
to make it as a inline function to avoid burning some CPU cycles.
Change in text size:
text data bss dec hex filename
before: 326110 19258 5528 350896 55ab0 fs/ext4/ext4.o
after: 326227 19258 5528 351013 55b25 fs/ext4/ext4.o
I use the following script to measure the CPU usage.
#!/bin/bash
shm_base='/dev/shm'
img=${shm_base}/ext4-img
mnt=/mnt/loop
e2fsprgs_base=$HOME/e2fsprogs
mkfs=${e2fsprgs_base}/misc/mke2fs
fsck=${e2fsprgs_base}/e2fsck/e2fsck
sudo umount $mnt
dd if=/dev/zero of=$img bs=4k count=3145728
${mkfs} -t ext4 -O inline_data -F $img
sudo mount -t ext4 -o loop $img $mnt
# start testing...
testdir="${mnt}/testdir"
mkdir $testdir
cd $testdir
echo "start testing..."
for ((cnt=0;cnt<100;cnt++)); do
for ((i=0;i<5;i++)); do
for ((j=0;j<5;j++)); do
for ((k=0;k<5;k++)); do
for ((l=0;l<5;l++)); do
mkdir -p $i/$j/$k/$l
echo "$i-$j-$k-$l" > $i/$j/$k/$l/testfile
done
done
done
done
ls -R $testdir > /dev/null
rm -rf $testdir/*
done
The result of `perf top -G -U` is as below.
vanilla:
13.92% [ext4] [k] ext4_do_update_inode
9.36% [ext4] [k] __ext4_get_inode_loc
4.07% [ext4] [k] ftrace_define_fields_ext4_writepages
3.83% [ext4] [k] __ext4_handle_dirty_metadata
3.42% [ext4] [k] ext4_get_inode_flags
2.71% [ext4] [k] ext4_mark_iloc_dirty
2.46% [ext4] [k] ftrace_define_fields_ext4_direct_IO_enter
2.26% [ext4] [k] ext4_get_inode_loc
2.22% [ext4] [k] ext4_has_inline_data
[...]
After applied the patch, we don't see ext4_has_inline_data() because it
has been inlined and perf couldn't sample it. Although it doesn't mean
that the CPU cycles can be saved but at least the overhead of function
calls can be eliminated. So IMHO we'd better inline this function.
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently punch hole code on files with direct/indirect mapping has some
problems which may lead to a data loss. For example (from Jan Kara):
fallocate -n -p 10240000 4096
will punch the range 10240000 - 12632064 instead of the range 1024000 -
10244096.
Also the code is a bit weird and it's not using infrastructure provided
by indirect.c, but rather creating it's own way.
This patch fixes the issues as well as making the operation to run 4
times faster from my testing (punching out 60GB file). It uses similar
approach used in ext4_ind_truncate() which takes advantage of
ext4_free_branches() function.
Also rename the ext4_free_hole_blocks() to something more sensible, like
the equivalent we have for extent mapped files. Call it
ext4_ind_remove_space().
This has been tested mostly with fsx and some xfstests which are testing
punch hole but does not require unwritten extents which are not
supported with direct/indirect mapping. Not problems showed up even with
1024k block size.
CC: stable@vger.kernel.org
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit 27dd438542 ("ext4: introduce reserved space") reserves 2% of
the file system space to make sure metadata allocations will always
succeed. Given that, tracking the reservation of metadata blocks is
no longer necessary.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Pull vfs updates from Al Viro:
"This the bunch that sat in -next + lock_parent() fix. This is the
minimal set; there's more pending stuff.
In particular, I really hope to get acct.c fixes merged this cycle -
we need that to deal sanely with delayed-mntput stuff. In the next
pile, hopefully - that series is fairly short and localized
(kernel/acct.c, fs/super.c and fs/namespace.c). In this pile: more
iov_iter work. Most of prereqs for ->splice_write with sane locking
order are there and Kent's dio rewrite would also fit nicely on top of
this pile"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (70 commits)
lock_parent: don't step on stale ->d_parent of all-but-freed one
kill generic_file_splice_write()
ceph: switch to iter_file_splice_write()
shmem: switch to iter_file_splice_write()
nfs: switch to iter_splice_write_file()
fs/splice.c: remove unneeded exports
ocfs2: switch to iter_file_splice_write()
->splice_write() via ->write_iter()
bio_vec-backed iov_iter
optimize copy_page_{to,from}_iter()
bury generic_file_aio_{read,write}
lustre: get rid of messing with iovecs
ceph: switch to ->write_iter()
ceph_sync_direct_write: stop poking into iov_iter guts
ceph_sync_read: stop poking into iov_iter guts
new helper: copy_page_from_iter()
fuse: switch to ->write_iter()
btrfs: switch to ->write_iter()
ocfs2: switch to ->write_iter()
xfs: switch to ->write_iter()
...
I have been running make namespacecheck to look for unneeded globals, and
found these in ext4.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The ext4_bg_has_super() function doesn't know about the new rules for
where backup superblocks go on a sparse_super2 filesystem. Therefore,
block bitmap initialization doesn't know that it shouldn't reserve
space for backups in groups that are never going to contain backups.
The result of this is e2fsck complaining about the block bitmap being
incorrect (fortunately not in a way that results in cross-linked
files), so fix the whole thing.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When we perform a data integrity sync we tag all the dirty pages with
PAGECACHE_TAG_TOWRITE at start of ext4_da_writepages. Later we check
for this tag in write_cache_pages_da and creates a struct
mpage_da_data containing contiguously indexed pages tagged with this
tag and sync these pages with a call to mpage_da_map_and_submit. This
process is done in while loop until all the PAGECACHE_TAG_TOWRITE
pages are synced. We also do journal start and stop in each iteration.
journal_stop could initiate journal commit which would call
ext4_writepage which in turn will call ext4_bio_write_page even for
delayed OR unwritten buffers. When ext4_bio_write_page is called for
such buffers, even though it does not sync them but it clears the
PAGECACHE_TAG_TOWRITE of the corresponding page and hence these pages
are also not synced by the currently running data integrity sync. We
will end up with dirty pages although sync is completed.
This could cause a potential data loss when the sync call is followed
by a truncate_pagecache call, which is exactly the case in
collapse_range. (It will cause generic/127 failure in xfstests)
To avoid this issue, we can use set_page_writeback_keepwrite instead of
set_page_writeback, which doesn't clear TOWRITE tag.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
To avoid potential data races, use a spinlock which protects the raw
(on-disk) inode.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Currently in ext4 there is quite a mess when it comes to naming
unwritten extents. Sometimes we call it uninitialized and sometimes we
refer to it as unwritten.
The right name for the extent which has been allocated but does not
contain any written data is _unwritten_. Other file systems are
using this name consistently, even the buffer head state refers to it as
unwritten. We need to fix this confusion in ext4.
This commit changes every reference to an uninitialized extent (meaning
allocated but unwritten) to unwritten extent. This includes comments,
function names and variable names. It even covers abbreviation of the
word uninitialized (such as uninit) and some misspellings.
This commit does not change any of the code paths at all. This has been
confirmed by comparing md5sums of the assembly code of each object file
after all the function names were stripped from it.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently EXT4_MAP_UNINIT is used in dioread_nolock case to mark the
cases where we're using dioread_nolock and we're writing into either
unallocated, or unwritten extent, because we need to make sure that
any DIO write into that inode will wait for the extent conversion.
However EXT4_MAP_UNINIT is not only entirely misleading name but also
unnecessary because we can check for EXT4_MAP_UNWRITTEN in the
dioread_nolock case instead.
This commit removes EXT4_MAP_UNINIT flag.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The function ext4_update_i_disksize() is used in only one place, in
the function mpage_map_and_submit_extent(). Move its code to simplify
the code paths, and also move the call to ext4_mark_inode_dirty() into
the i_data_sem's critical region, to be consistent with all of the
other places where we update i_disksize. That way, we also keep the
raw_inode's i_disksize protected, to avoid the following race:
CPU #1 CPU #2
down_write(&i_data_sem)
Modify i_disk_size
up_write(&i_data_sem)
down_write(&i_data_sem)
Modify i_disk_size
Copy i_disk_size to on-disk inode
up_write(&i_data_sem)
Copy i_disk_size to on-disk inode
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
It's only called within inode.c, so make it static, remove its prototype
from ext4.h and move it above all of its callers so it doesn't need a
prototype within inode.c.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Set a in-memory superblock flag to indicate whether the file system is
designed to support the Hurd.
Also, add a sanity check to make sure the 64-bit feature is not set
for Hurd file systems, since i_file_acl_high conflicts with a
Hurd-specific field.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch adds new interfaces to create and destory cache,
ext4_xattr_create_cache() and ext4_xattr_destroy_cache(), and remove
the cache creation and destory calls from ex4_init_xattr() and
ext4_exitxattr() in fs/ext4/xattr.c.
fs/ext4/super.c has been changed so that when a filesystem is mounted
a cache is allocated and attched to its ext4_sb_info structure.
fs/mbcache.c has been changed so that only one slab allocator is
allocated and used by all mbcache structures.
Signed-off-by: T. Makphaibulchoke <tmac@hp.com>
Introduce new FALLOC_FL_ZERO_RANGE flag for fallocate. This has the same
functionality as xfs ioctl XFS_IOC_ZERO_RANGE.
It can be used to convert a range of file to zeros preferably without
issuing data IO. Blocks should be preallocated for the regions that span
holes in the file, and the entire range is preferable converted to
unwritten extents
This can be also used to preallocate blocks past EOF in the same way as
with fallocate. Flag FALLOC_FL_KEEP_SIZE which should cause the inode
size to remain the same.
Also add appropriate tracepoints.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch implements fallocate's FALLOC_FL_COLLAPSE_RANGE for Ext4.
The semantics of this flag are following:
1) It collapses the range lying between offset and length by removing any data
blocks which are present in this range and than updates all the logical
offsets of extents beyond "offset + len" to nullify the hole created by
removing blocks. In short, it does not leave a hole.
2) It should be used exclusively. No other fallocate flag in combination.
3) Offset and length supplied to fallocate should be fs block size aligned
in case of xfs and ext4.
4) Collaspe range does not work beyond i_size.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Tested-by: Dongsu Park <dongsu.park@profitbricks.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the i_crtime field is not present in the inode, don't leave the
field uninitialized.
Fixes: ef7f38359 ("ext4: Add nanosecond timestamps")
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Tested-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
The missing casts can cause the high 64-bits of the physical blocks to
be lost. Set up new macros which allows us to make sure the right
thing happen, even if at some point we end up supporting larger
logical block numbers.
Thanks to the Emese Revfy and the PaX security team for reporting this
issue.
Reported-by: PaX Team <pageexec@freemail.hu>
Reported-by: Emese Revfy <re.emese@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=F4g3
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 changes from Ted Ts'o:
"Ext4 updates for 3.13. Mostly bug fixes and cleanups"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: add prototypes for macro-generated functions
ext4: return non-zero st_blocks for inline data
ext4: use prandom_u32() instead of get_random_bytes()
ext4: remove unreachable code after ext4_can_extents_be_merged()
ext4: remove unreachable code in ext4_can_extents_be_merged()
ext4: avoid bh leak in retry path of ext4_expand_extra_isize_ea()
ext4: don't count free clusters from a corrupt block group
ext4: fix FITRIM in no journal mode
ext4: drop set but otherwise unused variable from ext4_add_dirent_to_inline()
ext4: change ext4_read_inline_dir() to return 0 on success
ext4: pair trace_ext4_writepages & trace_ext4_writepages_result
ext4: add ratelimiting to ext4 messages
ext4: fix performance regression in ext4_writepages
ext4: fixup kerndoc annotation of mpage_map_and_submit_extent()
ext4: fix assertion in ext4_add_complete_io()
It isn't very easy to find the declarations for the functions created
by EXT4_INODE_BIT_FNS() because the names are generated by macros:
ext4_test_inode_flag, ext4_set_inode_flag, ext4_clear_inode_flag
ext4_test_inode_state, ext4_set_inode_state, ext4_clear_inode_state
Add explicit declarations for these functions so that grep and tags
can find them.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We want to do this elsewhere as well.
Also catch any attempts to use it for directories (where this ordering
would conflict with ancestor-first directory ordering in lock_rename).
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Dave Chinner <david@fromorbit.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In the case of a storage device that suddenly disappears, or in the
case of significant file system corruption, this can result in a huge
flood of messages being sent to the console. This can overflow the
file system containing /var/log/messages, or if a serial console is
configured, this can slow down the system so much that a hardware
watchdog can end up triggering forcing a system reboot.
Google-Bug-Id: 7258357
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Pull vfs pile 1 from Al Viro:
"Unfortunately, this merge window it'll have a be a lot of small piles -
my fault, actually, for not keeping #for-next in anything that would
resemble a sane shape ;-/
This pile: assorted fixes (the first 3 are -stable fodder, IMO) and
cleanups + %pd/%pD formats (dentry/file pathname, up to 4 last
components) + several long-standing patches from various folks.
There definitely will be a lot more (starting with Miklos'
check_submount_and_drop() series)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits)
direct-io: Handle O_(D)SYNC AIO
direct-io: Implement generic deferred AIO completions
add formats for dentry/file pathnames
kvm eventfd: switch to fdget
powerpc kvm: use fdget
switch fchmod() to fdget
switch epoll_ctl() to fdget
switch copy_module_from_fd() to fdget
git simplify nilfs check for busy subtree
ibmasmfs: don't bother passing superblock when not needed
don't pass superblock to hypfs_{mkdir,create*}
don't pass superblock to hypfs_diag_create_files
don't pass superblock to hypfs_vm_create_files()
oprofile: get rid of pointless forward declarations of struct super_block
oprofilefs_create_...() do not need superblock argument
oprofilefs_mkdir() doesn't need superblock argument
don't bother with passing superblock to oprofile_create_stats_files()
oprofile: don't bother with passing superblock to ->create_files()
don't bother passing sb to oprofile_create_files()
coh901318: don't open-code simple_read_from_buffer()
...
Add support to the core direct-io code to defer AIO completions to user
context using a workqueue. This replaces opencoded and less efficient
code in XFS and ext4 (we save a memory allocation for each direct IO)
and will be needed to properly support O_(D)SYNC for AIO.
The communication between the filesystem and the direct I/O code requires
a new buffer head flag, which is a bit ugly but not avoidable until the
direct I/O code stops abusing the buffer_head structure for communicating
with the filesystems.
Currently this creates a per-superblock unbound workqueue for these
completions, which is taken from an earlier patch by Jan Kara. I'm
not really convinced about this use and would prefer a "normal" global
workqueue with a high concurrency limit, but this needs further discussion.
JK: Fixed ext4 part, dynamic allocation of the workqueue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
If we detect either a discrepancy between the inode bitmap and the
inode counts or the inode bitmap fails to pass validation checks, mark
the block group corrupt and refuse to allocate or deallocate inodes
from the group.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When we notice a block-bitmap corruption (because of device failure or
something else), we should mark this group as corrupt and prevent
further block allocations/deallocations from it. Currently, we end up
generating one error message for every block in the bitmap. This
potentially could make the system unstable as noticed in some
bugs. With this patch, the error will be printed only the first time
and mark the entire block group as corrupted. This prevents future
access allocations/deallocations from it.
Also tested by corrupting the block
bitmap and forcefully introducing the mb_free_blocks error:
(1) create a largefile (2Gb)
$ dd if=/dev/zero of=largefile oflag=direct bs=10485760 count=200
(2) umount filesystem. use dumpe2fs to see which block-bitmaps
are in use by largefile and note their block numbers
(3) use dd to zero-out the used block bitmaps
$ dd if=/dev/zero of=/dev/hdc4 bs=4096 seek=14 count=8 oflag=direct
(4) mount the FS and delete the largefile.
(5) recreate the largefile. verify that the new largefile does not
get any blocks from the groups marked as bad.
Without the patch, we will see mb_free_blocks error for each bit in
each zero'ed out bitmap at (4). With the patch, we only see the error
once per blockgroup:
[ 309.706803] EXT4-fs error (device sdb4): ext4_mb_generate_buddy:735: group 15: 32768 clusters in bitmap, 0 in gd. blk grp corrupted.
[ 309.720824] EXT4-fs error (device sdb4): ext4_mb_generate_buddy:735: group 14: 32768 clusters in bitmap, 0 in gd. blk grp corrupted.
[ 309.732858] EXT4-fs error (device sdb4) in ext4_free_blocks:4802: IO failure
[ 309.748321] EXT4-fs error (device sdb4): ext4_mb_generate_buddy:735: group 13: 32768 clusters in bitmap, 0 in gd. blk grp corrupted.
[ 309.760331] EXT4-fs error (device sdb4) in ext4_free_blocks:4802: IO failure
[ 309.769695] EXT4-fs error (device sdb4): ext4_mb_generate_buddy:735: group 12: 32768 clusters in bitmap, 0 in gd. blk grp corrupted.
[ 309.781721] EXT4-fs error (device sdb4) in ext4_free_blocks:4802: IO failure
[ 309.798166] EXT4-fs error (device sdb4): ext4_mb_generate_buddy:735: group 11: 32768 clusters in bitmap, 0 in gd. blk grp corrupted.
[ 309.810184] EXT4-fs error (device sdb4) in ext4_free_blocks:4802: IO failure
[ 309.819532] EXT4-fs error (device sdb4): ext4_mb_generate_buddy:735: group 10: 32768 clusters in bitmap, 0 in gd. blk grp corrupted.
Google-Bug-Id: 7258357
[darrick.wong@oracle.com]
Further modifications (by Darrick) to make more obvious that this corruption
bit applies to blocks only. Set the corruption flag if the block group bitmap
verification fails.
Original-author: Aditya Kali <adityakali@google.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>