Commit graph

113 commits

Author SHA1 Message Date
Suman Anna
315491e5d6 remoteproc: add IOMMU hardware capability flag
The remoteproc framework currently relies on iommu_present() on
the bus the device is on, to perform MMU management. However, this
logic doesn't scale for multi-arch, especially for processors that
do not have an IOMMU. Replace this logic instead by using a h/w
capability flag for the presence of IOMMU in the rproc structure.

This issue is seen on OMAP platforms when trying to add a remoteproc
driver for a small Cortex M3 called the WkupM3 used for suspend /
resume management on TI AM335/AM437x SoCs. This processor does not
have an MMU. Same is the case with another processor subsystem
PRU-ICSS on AM335/AM437x. All these are platform devices, and the
current iommu_present check will not scale for the same kernel image
to support OMAP4/OMAP5 and AM335/AM437x.

The existing platform implementation drivers - OMAP remoteproc, STE
Modem remoteproc and DA8xx remoteproc, are updated as well to properly
configure the newly added rproc field.

Cc: Robert Tivy <rtivy@ti.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Suman Anna <s-anna@ti.com>
[small change in the commit title and in a single comment]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2015-03-12 10:43:26 +02:00
Linus Torvalds
e6b5be2be4 Driver core patches for 3.19-rc1
Here's the set of driver core patches for 3.19-rc1.
 
 They are dominated by the removal of the .owner field in platform
 drivers.  They touch a lot of files, but they are "simple" changes, just
 removing a line in a structure.
 
 Other than that, a few minor driver core and debugfs changes.  There are
 some ath9k patches coming in through this tree that have been acked by
 the wireless maintainers as they relied on the debugfs changes.
 
 Everything has been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlSOD20ACgkQMUfUDdst+ylLPACg2QrW1oHhdTMT9WI8jihlHVRM
 53kAoLeteByQ3iVwWurwwseRPiWa8+MI
 =OVRS
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core update from Greg KH:
 "Here's the set of driver core patches for 3.19-rc1.

  They are dominated by the removal of the .owner field in platform
  drivers.  They touch a lot of files, but they are "simple" changes,
  just removing a line in a structure.

  Other than that, a few minor driver core and debugfs changes.  There
  are some ath9k patches coming in through this tree that have been
  acked by the wireless maintainers as they relied on the debugfs
  changes.

  Everything has been in linux-next for a while"

* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
  Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
  fs: debugfs: add forward declaration for struct device type
  firmware class: Deletion of an unnecessary check before the function call "vunmap"
  firmware loader: fix hung task warning dump
  devcoredump: provide a one-way disable function
  device: Add dev_<level>_once variants
  ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
  ath: use seq_file api for ath9k debugfs files
  debugfs: add helper function to create device related seq_file
  drivers/base: cacheinfo: remove noisy error boot message
  Revert "core: platform: add warning if driver has no owner"
  drivers: base: support cpu cache information interface to userspace via sysfs
  drivers: base: add cpu_device_create to support per-cpu devices
  topology: replace custom attribute macros with standard DEVICE_ATTR*
  cpumask: factor out show_cpumap into separate helper function
  driver core: Fix unbalanced device reference in drivers_probe
  driver core: fix race with userland in device_add()
  sysfs/kernfs: make read requests on pre-alloc files use the buffer.
  sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
  fs: sysfs: return EGBIG on write if offset is larger than file size
  ...
2014-12-14 16:10:09 -08:00
Linus Torvalds
6b9e2cea42 virtio: virtio 1.0 support, misc patches
This adds a lot of infrastructure for virtio 1.0 support.
 Notable missing pieces: virtio pci, virtio balloon (needs spec extension),
 vhost scsi.
 
 Plus, there are some minor fixes in a couple of places.
 
 Cc: David Miller <davem@davemloft.net>
 Cc: Rusty Russell <rusty@rustcorp.com.au>
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUh1CVAAoJECgfDbjSjVRpWZcH/2+EGPyng7Lca820UHA0cU1U
 u4D8CAAwOGaVdnUUo8ox1eon3LNB2UgRtgsl3rBDR3YTgFfNPrfuYdnHO0dYIDc1
 lS26NuPrVrTX0lA+OBPe2nlKrsrOkn8aw1kxG9Y0gKtNg/+HAGNW5e2eE7R/LrA5
 94XbWZ8g9Yf4GPG1iFmih9vQvvN0E68zcUlojfCnllySgaIEYr8nTiGQBWpRgJat
 fCqFAp1HMDZzGJQO+m1/Vw0OftTRVybyfai59e6uUTa8x1djvzPb/1MvREqQjegM
 ylSuofIVyj7JPu++FbAjd9mikkb53GSc8ql3YmWNZLdr69rnkzP0GdzQvrdheAo=
 =RtrR
 -----END PGP SIGNATURE-----

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

Pull virtio updates from Michael Tsirkin:
 "virtio: virtio 1.0 support, misc patches

  This adds a lot of infrastructure for virtio 1.0 support.  Notable
  missing pieces: virtio pci, virtio balloon (needs spec extension),
  vhost scsi.

  Plus, there are some minor fixes in a couple of places.

  Note: some net drivers are affected by these patches.  David said he's
  fine with merging these patches through my tree.

  Rusty's on vacation, he acked using my tree for these, too"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (70 commits)
  virtio_ccw: finalize_features error handling
  virtio_ccw: future-proof finalize_features
  virtio_pci: rename virtio_pci -> virtio_pci_common
  virtio_pci: update file descriptions and copyright
  virtio_pci: split out legacy device support
  virtio_pci: setup config vector indirectly
  virtio_pci: setup vqs indirectly
  virtio_pci: delete vqs indirectly
  virtio_pci: use priv for vq notification
  virtio_pci: free up vq->priv
  virtio_pci: fix coding style for structs
  virtio_pci: add isr field
  virtio: drop legacy_only driver flag
  virtio_balloon: drop legacy_only driver flag
  virtio_ccw: rev 1 devices set VIRTIO_F_VERSION_1
  virtio: allow finalize_features to fail
  virtio_ccw: legacy: don't negotiate rev 1/features
  virtio: add API to detect legacy devices
  virtio_console: fix sparse warnings
  vhost: remove unnecessary forward declarations in vhost.h
  ...
2014-12-11 12:20:31 -08:00
Michael S. Tsirkin
5c609a5ef0 virtio: allow finalize_features to fail
This will make it easy for transports to validate features and return
failure.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-12-09 16:32:32 +02:00
Michael S. Tsirkin
93d389f820 virtio: assert 32 bit features in transports
At this point, no transports set any of the high 32 feature bits.
Since transports generally can't (yet) cope with such bits, add BUG_ON
checks to make sure they are not set by mistake.

Based on rproc patch by Rusty.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-12-09 12:05:24 +02:00
Michael S. Tsirkin
d025477368 virtio: add support for 64 bit features.
Change u32 to u64, and use BIT_ULL and 1ULL everywhere.

Note: transports are unchanged, and only set low 32 bit.
This guarantees that no transport sets e.g. VERSION_1
by mistake without proper support.

Based on patch by Rusty.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-12-09 12:05:24 +02:00
Michael S. Tsirkin
e16e12be34 virtio: use u32, not bitmap for features
It seemed like a good idea to use bitmap for features
in struct virtio_device, but it's actually a pain,
and seems to become even more painful when we get more
than 32 feature bits.  Just change it to a u32 for now.

Based on patch by Rusty.

Suggested-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-12-09 12:05:23 +02:00
Suman Anna
8841a66aaa mailbox/omap: adapt to the new mailbox framework
The OMAP mailbox driver and its existing clients (remoteproc
for OMAP4+) are adapted to use the generic mailbox framework.

The main changes for the adaptation are:
  - The tasklet used for Tx is replaced with the state machine from
    the generic mailbox framework. The workqueue used for processing
    the received messages stays intact for minimizing the effects on
    the OMAP mailbox clients.
  - The existing exported client API, omap_mbox_get, omap_mbox_put and
    omap_mbox_send_msg are deleted, as the framework provides equivalent
    functionality. A OMAP-specific omap_mbox_request_channel is added
    though to support non-DT way of requesting mailboxes.
  - The OMAP mailbox driver is integrated with the mailbox framework
    through the proper implementations of mbox_chan_ops, except for
    .last_tx_done and .peek_data. The OMAP mailbox driver does not need
    these ops, as it is completely interrupt driven.
  - The OMAP mailbox driver uses a custom of_xlate controller ops that
    allows phandles for the pargs specifier instead of indexing to avoid
    any channel registration order dependencies.
  - The new framework does not support multiple clients operating on a
    single channel, so the reference counting logic is simplified.
  - The remoteproc driver (current client) is adapted to use the new API.
    The notifier callbacks used within this client is replaced with the
    regular callbacks from the newer framework.
  - The exported OMAP mailbox API are limited to omap_mbox_save_ctx,
    omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq,
    with the signature modified to take in the new mbox_chan handle instead
    of the OMAP specific omap_mbox handle. The first 2 will be removed when
    the OMAP mailbox driver is adapted to runtime_pm. The other exported
    API omap_mbox_request_channel will be removed once existing legacy
    users are converted to DT.

Signed-off-by: Suman Anna <s-anna@ti.com>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-27 12:51:04 +05:30
Wolfram Sang
51aa31b49f remoteproc: drop owner assignment from platform_drivers
A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20 16:21:29 +02:00
Arnd Bergmann
8c0945240e remoteproc: da8xx: don't select CMA on no-MMU
We can only use CMA on systems that have an MMU, because of
the requirement to use memory migration. NOMMU systems are
rather constrained to start with, but it seems reasonable
to assume that DMA allocations can still succeed in the
constrained case for remoteproc on NOMMU, so this patch
changes the da8xx implementation to not rely on CMA when
the MMU is disabled.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Robert Tivy <rtivy@ti.com>
2014-06-17 17:09:36 +02:00
Jingoo Han
bd88acba5f remoteproc/ste_modem: staticize local symbols
These local symbols are used only in this file.
Fix the following sparse warnings:

drivers/remoteproc/ste_modem_rproc.c:167:27: warning: symbol 'sproc_fw_ops' was not declared. Should it be static?
drivers/remoteproc/ste_modem_rproc.c:196:25: warning: symbol 'sproc_dev_cb' was not declared. Should it be static?

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
[standartize patch title]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2014-02-24 11:16:16 +02:00
Julia Lawall
0ddc5ec1c1 remoteproc/davinci: simplify use of devm_ioremap_resource
Remove unneeded error handling on the result of a call to
platform_get_resource when the value is passed to devm_ioremap_resource.

Move the call to platform_get_resource adjacent to the call to
devm_ioremap_resource to make the connection between them more clear.

A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression pdev,res,n,e,e1;
expression ret != 0;
identifier l;
@@

- res = platform_get_resource(pdev, IORESOURCE_MEM, n);
  ... when != res
- if (res == NULL) { ... \(goto l;\|return ret;\) }
  ... when != res
+ res = platform_get_resource(pdev, IORESOURCE_MEM, n);
  e = devm_ioremap_resource(e1, res);
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
[simplify patch title]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2014-02-24 11:10:24 +02:00
Uwe Kleine-König
5d658bfdb4 remoteproc/davinci: drop needless devm_clk_put
The comment above disable_irq says that it is needed to ensure that the
"devm subsystem might end up releasing things before freeing the irq,
thus allowing an interrupt to sneak in while the device is being
removed." disable_irq is enough for this purpose and there is no need to
manually free the reference to the clock.

Cc: Robert Tivy <rtivy@ti.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
[moved the Cc line into the commit message]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2014-02-24 11:00:55 +02:00
Heinz Graalfs
46f9c2b925 virtio_ring: change host notification API
Currently a host kick error is silently ignored and not reflected in
the virtqueue of a particular virtio device.

Changing the notify API for guest->host notification seems to be one
prerequisite in order to be able to handle such errors in the context
where the kick is triggered.

This patch changes the notify API. The notify function must return a
bool return value. It returns false if the host notification failed.

Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-10-29 11:28:11 +10:30
Rusty Russell
60d676c007 remoteproc: don't use PTR_RET().
We've already tested that it's an error.

Cc: Robert Tivy <rtivy@ti.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-07-15 11:25:04 +09:30
Linus Torvalds
0edcd16a4d Trivial remoteproc fixes by Suman Anna, Wei Yongjun and Thomas Meyer.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJR3XhWAAoJELLolMlTRIoMwI8QALCsx4CUra3x56M4ZzP2Hvq/
 rIabfAGqzEwWKPRlyuPciraNfRmBmyRHkXjfJ+MI6Ct1u25ryZaPWSu4pCaYOYjJ
 1AX0nEC/JUiKdizxSLupOs40VG4wJkR6CfbvxqxwE+KpB72kQ2acH8RuZfUpxfHJ
 NE+rb7QtZXJGOj2DJZIjJcBSBWtA4YWblddjDQMlAeihMz/XT7zTB/q0WpiGH1JR
 0oEgE7BaQmV0794JXPHqfVXJ/wh1yDkfB0W/I+rV6hICC8SQOorJ8hhK8pBJJ28S
 /XjXigGb0ycrmhNwM0TbL5IAgu71OT2mFsi3pwRi62pINBh+QErMcwIOlAtPU0hW
 vdNiScoQFcNsFD4kiiDOUyqEzUkOulH5Tu4nJ2QXLQKEkEf7Q1LOYOaxH0u/4/oS
 RQ7HnR1IZO0gnoBKUyNl4NWQL4pcs2XIhdpoXBMXN3c8Ge6xOcguM59sR1GQaT15
 CF82MHSPqgzyKjwx0qPEi24wDZ7GdYx5nKzuALg7IA4hhQmr541wswjBdtneQ4H7
 GK8lj7wVECZimdStxptDJjp3iHEfpfUYx8hGr9fJi0bhUhGSniZn4xGG94qoERNq
 xWSmlVyd1ePt5wSXt+mfIMdScjXBcvWB4k0QSaZVsFP8oCJ+PLjvuPEXSEB9ude4
 88WZMJGjQhnE3Y5EUZr9
 =dN3q
 -----END PGP SIGNATURE-----

Merge tag 'remoteproc-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc

Pull remoteproc fixes from Ohad Ben-Cohen:
 "Trivial remoteproc fixes by Suman Anna, Wei Yongjun and Thomas Meyer"

* tag 'remoteproc-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc:
  remoteproc: Cocci spatch "memdup.spatch"
  remoteproc: free carveout memories only after unmapping them
  remoteproc/omap: fix a sparse warning
  remoteproc: fix checkpatch errors in remoteproc code
  remoteproc: fix error return code in rproc_fw_boot()
2013-07-11 12:35:09 -07:00
Thomas Meyer
95cee62cb4 remoteproc: Cocci spatch "memdup.spatch"
Use kmemdup instead of kmalloc + memcpy.

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-07-01 17:23:58 +03:00
Suman Anna
b6356a013a remoteproc: free carveout memories only after unmapping them
It is not preferable to have the allocated pages for carveout
memories freed before they are unmapped. The code that deals
with the cleanup of carveout memories is therefore moved after
the corresponding mapping entries were cleaned up.

This is mostly a no-op since the remote processors are already
stopped when the cleanup function is called, but this will make
the cleanup code follow the exact reverse path of allocation.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-07-01 17:01:56 +03:00
Suman Anna
5797115920 remoteproc: fix checkpatch errors in remoteproc code
This patch fixes relevant checkpatch errors and warnings
in the remoteproc source files.

Signed-off-by: Suman Anna <s-anna@ti.com>
[drop 80-char-lines checkpatch fixes and update commit log accordingly]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-06-30 11:33:05 +03:00
Wei Yongjun
89970d28cb remoteproc: fix error return code in rproc_fw_boot()
Set 'ret' to -EINVAL when needed, so a sensible return value
is returned on errors.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
[fix additional instances of this bug as well, update commit log]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-06-30 11:07:13 +03:00
Suman Anna
c869c75c16 mailbox/omap: move the OMAP mailbox framework to drivers
The mailbox hardware (in OMAP) uses a queued mailbox interrupt
mechanism that provides a communication channel between processors
through a set of registers and their associated interrupt signals
by sending and receiving messages.

The OMAP mailbox framework/driver code is moved to be under
drivers/mailbox, in preparation for adapting to a common mailbox
driver framework. This allows the build for OMAP mailbox to be
enabled (it was disabled during the multi-platform support).

As part of the migration from plat and mach code:
- Kconfig symbols have been renamed to build OMAP1 or OMAP2+ drivers.
- mailbox.h under plat-omap/plat/include has been split into a public
  and private header files. The public header has only the API related
  functions and types.
- The module name mailbox.ko from plat-omap is changed to
  omap-mailbox.ko
- The module name mailbox_mach.ko from mach-omapX is changed as
    mailbox_omap1.ko for OMAP1
    mailbox_omap2.ko for OMAP2+

Cc: Tony Lindgren <tony@atomide.com>
[gregkh@linuxfoundation.org: ack for staging part]
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
2013-06-11 11:41:51 -05:00
Linus Torvalds
de9c9f86be This pull request contains:
- Some refactoring, cleanups and small improvements
   from Sjur Brændeland. The improvements are mainly
   about better supporting varios virtio properties
   (such as virtio's config space, status and features).
   I now see that I messed up while commiting one of Sjur's
   patches and erroneously put myself as the author, as well
   as letting a nasty typo sneak in. I will not fix this in
   order to avoid rebasing the patches. Sjur - sorry!
 - A new remoteproc driver for OMAP-L13x (technically a
   DaVinci platform) from Robert Tivy.
 - Extend OMAP support to OMAP5 as well, from Vincent Stehlé.
 - Fix Kconfig VIRTUALIZATION dependency, from Suman Anna
   (a non-critical fix which arrived late during the rc cycle).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRiPCwAAoJELLolMlTRIoMRoQP/ivAF3r9jPaMizky82T0mDs0
 kUPz6sz0zwb412h/IVtCo0ChJ1Jv4rVgo5u4klzDS5wfOutRiwDFIa8ZQF484nRb
 gTIFHtqy+xk82aHAR9PWi2G3QWJ9hplZ7m52aaOIG7E6BaY3EfWL7fnt5QGBAb/O
 vcR3rrj7QNQcB963PQl7cYWSX966ipzfX1g7VxFk/Ah8m9rjQp0xZgg3a5svGmq7
 5iQcdxiXm63RAfgN9kbZrxWjX5/7m1N1WOfK5CE1H2jnGObttNdhN5xr7Ky5TXyN
 sVJvoVhIbylSzDVl/LH6v/V9T/is+VCZOPs+erXVGv2vGctNY5Cs+RAVPF4bz4UC
 R9/LDRbdZtbvcKo0TiPAjsIN3t+Rg1EDBnjOImi5kN5bYASpfcoRE0hpicL51S01
 HzdT5+k3Xo5RS0EWakITc1ecc+7kfMVjLjn59/Im+bWVGhv2Lzq1pCFQ+XAcfvL9
 FrQCGYCn8QZFWBHgeDRzg1ysK4hDNPo1UkEbLTTXjFcaMLeMczSSRagCi4Fk2RjL
 QYmtDzKbm7Tc03Yi6ac7A8I2lgeQRsXNENLxtTtONu9rNKf4O0Of86KCLhtUtDqb
 6SUxn2ZvG+maXwyrqbIjak+CKphimOnOEEIxur3viuKLs4sM8yuZCzU+v56bPbdb
 Pqcdo7VOhqAwTBoW3NUp
 =IUfO
 -----END PGP SIGNATURE-----

Merge tag 'remoteproc-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc

Pull remoteproc update from Ohad Ben-Cohen:

 - Some refactoring, cleanups and small improvements from Sjur
   Brændeland.  The improvements are mainly about better supporting
   varios virtio properties (such as virtio's config space, status and
   features).  I now see that I messed up while commiting one of Sjur's
   patches and erroneously put myself as the author, as well as letting
   a nasty typo sneak in.  I will not fix this in order to avoid
   rebasing the patches.  Sjur - sorry!

 - A new remoteproc driver for OMAP-L13x (technically a DaVinci
   platform) from Robert Tivy.

 - Extend OMAP support to OMAP5 as well, from Vincent Stehlé.

 - Fix Kconfig VIRTUALIZATION dependency, from Suman Anna (a
   non-critical fix which arrived late during the rc cycle).

* tag 'remoteproc-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc:
  remoteproc: fix kconfig dependencies for VIRTIO
  remoteproc/davinci: add a remoteproc driver for OMAP-L13x DSP
  remoteproc: support default firmware name in rproc_alloc()
  remoteproc/omap: support OMAP5 too
  remoteproc: set vring addresses in resource table
  remoteproc: support virtio config space.
  remoteproc: perserve resource table data
  remoteproc: calculate max_notifyid by counting vrings
  remoteproc: code cleanup of resource parsing
  remoteproc: parse STE-firmware and find resource table address
  remoteproc: add find_loaded_rsc_table firmware ops
  remoteproc: refactor rproc_elf_find_rsc_table()
2013-05-07 14:04:56 -07:00
Linus Torvalds
5d434fcb25 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
 "Usual stuff, mostly comment fixes, typo fixes, printk fixes and small
  code cleanups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (45 commits)
  mm: Convert print_symbol to %pSR
  gfs2: Convert print_symbol to %pSR
  m32r: Convert print_symbol to %pSR
  iostats.txt: add easy-to-find description for field 6
  x86 cmpxchg.h: fix wrong comment
  treewide: Fix typo in printk and comments
  doc: devicetree: Fix various typos
  docbook: fix 8250 naming in device-drivers
  pata_pdc2027x: Fix compiler warning
  treewide: Fix typo in printks
  mei: Fix comments in drivers/misc/mei
  treewide: Fix typos in kernel messages
  pm44xx: Fix comment for "CONFIG_CPU_IDLE"
  doc: Fix typo "CONFIG_CGROUP_CGROUP_MEMCG_SWAP"
  mmzone: correct "pags" to "pages" in comment.
  kernel-parameters: remove outdated 'noresidual' parameter
  Remove spurious _H suffixes from ifdef comments
  sound: Remove stray pluses from Kconfig file
  radio-shark: Fix printk "CONFIG_LED_CLASS"
  doc: put proper reference to CONFIG_MODULE_SIG_ENFORCE
  ...
2013-04-30 09:36:50 -07:00
Masanari Iida
b23f7a09f9 treewide: Fix typo in printk and comments
Fix typo in printk and comments within various drivers.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-04-24 16:43:00 +02:00
Suman Anna
b9777859ec remoteproc: fix kconfig dependencies for VIRTIO
Fix this:

warning: (VIRTIO_PCI && VIRTIO_MMIO && REMOTEPROC && RPMSG) selects VIRTIO which has unmet direct dependencies (VIRTUALIZATION)

Cc: stable@vger.kernel.org
Signed-off-by: Suman Anna <s-anna@ti.com>
[edit commit log]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-04-21 16:30:22 +03:00
Robert Tivy
13be5432d8 remoteproc/davinci: add a remoteproc driver for OMAP-L13x DSP
Adding a new remoteproc driver for OMAP-L13x DSP

Signed-off-by: Robert Tivy <rtivy@ti.com>
[removed 'EXPERIMENTAL' and fixed some indentation issues]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-04-15 09:23:40 +03:00
Robert Tivy
8b4aec9ac7 remoteproc: support default firmware name in rproc_alloc()
If rproc_alloc isn't given a firmware name, look for a default
one using the "rproc-%s-fw" template.

Signed-off-by: Robert Tivy <rtivy@ti.com>
[add commit log, document change, use snprintf, minor style change]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-04-07 15:40:04 +03:00
Robert Tivy
c7426bce59 remoteproc: fix FW_CONFIG typo
Fix obvious typo introduced in commit e121aefa7d
("remoteproc: fix missing CONFIG_FW_LOADER configurations").

Cc: stable@vger.kernel.org
Signed-off-by: Robert Tivy <rtivy@ti.com>
[cc stable, slight subject change]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-04-07 15:11:27 +03:00
Vincent Stehlé
e5bc0294ca remoteproc/omap: support OMAP5 too
This allows building remoteproc on OMAP5 too.

Signed-off-by: Vincent Stehlé <v-stehle@ti.com>
[edit commit log]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-04-07 14:06:18 +03:00
Sjur Brændeland
c0d631570a remoteproc: set vring addresses in resource table
Set the vring addresses in the resource table so that
the remote device can read the actual addresses used.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Acked-by: Ido Yariv <ido@wizery.com>
[rebase]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-04-07 14:06:17 +03:00
Sjur Brændeland
92b38f8514 remoteproc: support virtio config space.
Support virtio configuration space and device status. The virtio
device can now access the resource table in shared memory.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Acked-by: Ido Yariv <ido@wizery.com>
[rebase and style changes]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-04-07 14:06:17 +03:00
Ohad Ben-Cohen
a2b950ac7b remoteproc: perserve resource table data
Copy resource table from first to second firmware loading.
After firmware is loaded to memory, update the vdevs resource
pointer to the resource table kept in device memory.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Acked-by: Ido Yariv <ido@wizery.com>
[rebase, terminology and style changes]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-04-07 14:06:07 +03:00
Sjur Brændeland
ba7290e016 remoteproc: calculate max_notifyid by counting vrings
Simplify handling of max_notifyid by simply counting the
number of vrings.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Acked-by: Ido Yariv <ido@wizery.com>
[small terminology changes]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-04-07 14:04:25 +03:00
Sjur Brændeland
232fcdbb45 remoteproc: code cleanup of resource parsing
Combine the almost identical functions rproc_handle_virtio_rsc
and rproc_handle_boot_rsc.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Acked-by: Ido Yariv <ido@wizery.com>
[small terminology and style changes]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-04-05 08:50:07 +03:00
Sjur Brændeland
e4b5141481 remoteproc: parse STE-firmware and find resource table address
Parse the STE firmware and scan the TOC-table to find the address
of the loaded resource table.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
[rebase patch; update terminology]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-04-05 08:50:00 +03:00
Sjur Brændeland
95f9578163 remoteproc: add find_loaded_rsc_table firmware ops
Add function find_loaded_rsc_table to firmware ops. This function
returns the location of the resource table in shared memory
after loading.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Acked-by: Ido Yariv <ido@wizery.com>
[align function name with existing terminology, update commit log]
[document new function, rebase patch, small cleanups]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-04-05 08:49:52 +03:00
Sjur Brændeland
f665b2cd3f remoteproc: refactor rproc_elf_find_rsc_table()
Refactor rproc_elf_find_rsc_table() and split out the scanning
for the section header named resource table. This is done to
prepare for loading firmware once.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Acked-by: Ido Yariv <ido@wizery.com>
[small function name change to make the code easier to read]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-04-05 08:49:44 +03:00
Sjur Brændeland
cde42e076c remoteproc: fix error path of handle_vdev
Remove the vdev entry from the list before freeing it,
otherwise rproc->vdevs will explode.

Cc: stable@vger.kernel.org
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Acked-by: Ido Yariv <ido@wizery.com>
[edit subject, minor commit log edit, cc stable]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-04-05 08:47:57 +03:00
Dmitry Tarnyagin
1cd425b660 remoteproc/ste: fix memory leak on shutdown
Fixes coherent memory leakage, caused by non-deallocated
firmware image chunk.

Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Tarnyagin <dmitry.tarnyagin@stericsson.com>
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Acked-by: Ido Yariv <ido@wizery.com>
[slightly edit subject and commit log]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-04-05 08:47:49 +03:00
Suman Anna
b39599b7cb remoteproc: fix the error check for idr_alloc
The new idr_alloc interface returns the allocated id back
on success, so fix the error path to check for negative
values. This was missed out in the newer idr interface
adoption patch, 15fc611 "remoteproc: convert to idr_alloc()".

Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-04-05 08:47:38 +03:00
Tejun Heo
15fc61106a remoteproc: convert to idr_alloc()
Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:18 -08:00
Tejun Heo
045dc40d9e remoteproc: don't use idr_remove_all()
idr_destroy() can destroy idr by itself and idr_remove_all() is being
deprecated.  Drop its usage.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:13 -08:00
Linus Torvalds
3c834b6f41 All trivial, thanks to the stuff which didn't quite make it time.
Cheers,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRLEkHAAoJENkgDmzRrbjx6K0P/3o9/iW5hkOPYpu+KV2nr0wG
 6RG0uu0DCOb/tckigYwnn5PkS7UEcJu6kDypnEgXfhcNhYiBjoGIAUEQ2jBYyzQm
 IYc4oZhxDdqigJL/FHi2zL50mkWacTdBK83udxim3eRkgW9ysBRoBFwqMruVyhZv
 474KGS4PNT8pHDOCAlrRS1I9oW2pYTuUidN+SnfVJ8gFSkH0tuHEGoJeGrtDa010
 XkiWqiTJq6pDHTM5f4Wwp/WNQ21UNDBlvRahg0nqTZXicQsvujV0Tdb+EnAfXwa+
 bssqvO4X2WqlraVK1TJteufhcdhUgt/I1+45p9eLZvOXizk7EBKxFWynE7C878GV
 dhpz8i4mc+u6aJlGoHzwvKah0zhwDtqWdbDS+LNQjRmjMK9v45ttoisU+iR1GjLt
 JpDVg73K315aWJ9RLsYu7mvZ8JY+qRFkwXqX3lZd+GdohY0DSmGMxMqJG93sLBYi
 42vyHMaBd1JY0rDVqpfzlmjnSxX+k05uB0GYB3fO0CXbPxmfXtRKz7/5wpSz0Up+
 nTCs6Xa7t5jtG9qpC4cKxyEDEwB9M6SSxi+lhrIBkeDqlFwXAv1Fean4jqqhtFwr
 HO6i1mYgy0xCVY7EmequVyWlH6/B5GVB2xTMQuAz3f8pKm+XUr6C/twROYkgoXbV
 AOVyRWtnbISDVjtVFn9c
 =KcDx
 -----END PGP SIGNATURE-----

Merge tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull virtio updates from Rusty Russell:
 "All trivial, thanks to the stuff which didn't quite make it time"

* tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  virtio_console: Initialize guest_connected=true for rproc_serial
  virtio: use module_virtio_driver.
  virtio: Add module driver macro for virtio drivers.
  virtio_console: Use virtio device index to generate port name
  virtio: make pci_device_id const
  virtio: make config_ops const
  virtio-mmio: fix wrong comment about register offset
  virtio_console: Let unconnected rproc device receive data.
2013-02-26 14:49:12 -08:00
Linus Torvalds
3298a3511f arm-soc: multiplatform support
Converting more ARM platforms to multiplatform support. This time, OMAP
 gets converted, which is a major step since this is by far the largest
 platform in terms of code size. The same thing happens to the vt8500
 platform.
 
 Conflicts include:
 * Two mach/uncompress.h files are removed, the changes made to them
   elsewhere can be discarded now.
 * Moving the OMAP4 irq_match array has context clashes with turning
   omap4_sar_ram_init into an omap_early_initcall()
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUSUyOmCrR//JCVInAQI2zRAAnDUA3ufvANykRxNIII67D0u8XAgokzx6
 hwq0ywwcQknd2aetN1khs2rY3sQ+T73CcsFzOR448YHjbWg1RCZlCzL89uUH6SdR
 Bir/NC2jYkB1vSVB7krWhZzpeHNsFfWW1bCzwJzJfNmAZp64js3sOR1kRKjMpA2z
 RGLktrFQ1JRKF/az+xnIsrleSnS2cQguPKIs5hYxPztzN/HdvbD7ZST0ttW7wqzg
 C2AA5dnWs+C++pNXyfKlN+nL1CnyLWGXbuZUejUvAxYxgtyd/gC4/aTfNi8S9RNh
 eiFTmVwl8lsWqPWx7yzyHk+p19x7ypfBgydLU/z4yC3asUJoN5jyCF6GSqzetHJB
 jpDqTp3lQzIlJPgLryq07Xe38vUeVIKvV4e8ySOsSBlKr6aRl5684HJSCAZR9SFa
 qzHavusA5JZJKf+94UbDCPNzSqzMQYnILA039M8ekvrMZhFG89St0+NLDaxVQfO/
 OrTEnwth/TJBKvOUPIuamjZzHH/RiGkumWiKrEGKOlpwHPGtdglQeziJFo8pNkwR
 hjtnwn4RPPK8FIl59fERFI1hRvhUlwuhYcA2R/WTjcZw2d+jwZPzhhun37dLMVlw
 fk5lhz0GBaRUmua4xFqJTkpOwHf2l/9wbzhEpmL4c/ZSrtjYwfeL/tY6aT9e8MZK
 INaMr7X2QTw=
 =nl4h
 -----END PGP SIGNATURE-----

Merge tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC multiplatform support from Arnd Bergmann:
 "Converting more ARM platforms to multiplatform support.  This time,
  OMAP gets converted, which is a major step since this is by far the
  largest platform in terms of code size.  The same thing happens to the
  vt8500 platform."

* tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  net: cwdavinci_cpdma: export symbols for cpsw
  remoteproc: omap: depend on OMAP_MBOX_FWK
  [media] davinci: do not include mach/hardware.h
  ARM: OMAP2+: Make sure files with omap initcalls include soc.h
  ARM: OMAP2+: Include soc.h to drm.c to fix compiling
  ARM: OMAP2+: Fix warning for hwspinlock omap_postcore_initcall
  ARM: multi_v7_defconfig: add ARCH_ZYNQ
  ARM: multi_v7_defconfig: remove unnecessary CONFIG_GPIOLIB
  arm: vt8500: Remove remaining mach includes
  arm: vt8500: Convert debug-macro.S to be multiplatform friendly
  arm: vt8500: Remove single platform Kconfig options
  ARM: OMAP2+: Remove now obsolete uncompress.h and debug-macro.S
  ARM: OMAP2+: Add minimal support for booting vexpress
  ARM: OMAP2+: Enable ARCH_MULTIPLATFORM support
  ARM: OMAP2+: Disable code that currently does not work with multiplaform
  ARM: OMAP2+: Add multiplatform debug_ll support
  ARM: OMAP: Fix dmaengine init for multiplatform
  ARM: OMAP: Fix i2c cmdline initcall for multiplatform
  ARM: OMAP2+: Use omap initcalls
  ARM: OMAP2+: Limit omap initcalls to omap only on multiplatform kernels
2013-02-21 15:20:41 -08:00
Arnd Bergmann
0bef6c933f remoteproc: omap: depend on OMAP_MBOX_FWK
Patch a62a6e98 "ARM: OMAP2+: Disable code that currently does not work
with multiplaform" makes the OMAP_MBOX_FWK option depend on !MULTIPLATFORM,
which means we cannot simply select that symbol from OMAP_REMOTEPROC.

Turning the 'select' into 'depends on' ensures that all dependencies
are correct until OMAP_MBOX_FWK loses its dependency.

Without this patch, building allmodconfig results in:

drivers/remoteproc/omap_remoteproc.c:31:26: fatal error: plat/mailbox.h: No such file or directory

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-02-15 13:16:11 +01:00
Stephen Hemminger
9350393239 virtio: make config_ops const
It is just a table of function pointers, make it const for cleanliness and security
reasons.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-02-11 15:32:17 +10:30
Kees Cook
eb367cb620 drivers/remoteproc: remove depends on CONFIG_EXPERIMENTAL
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.

CC: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-21 14:52:44 -08:00
Greg Kroah-Hartman
0fe763c570 Drivers: misc: remove __dev* attributes.
CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-03 15:57:16 -08:00
Linus Torvalds
a2013a13e6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial branch from Jiri Kosina:
 "Usual stuff -- comment/printk typo fixes, documentation updates, dead
  code elimination."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  HOWTO: fix double words typo
  x86 mtrr: fix comment typo in mtrr_bp_init
  propagate name change to comments in kernel source
  doc: Update the name of profiling based on sysfs
  treewide: Fix typos in various drivers
  treewide: Fix typos in various Kconfig
  wireless: mwifiex: Fix typo in wireless/mwifiex driver
  messages: i2o: Fix typo in messages/i2o
  scripts/kernel-doc: check that non-void fcts describe their return value
  Kernel-doc: Convention: Use a "Return" section to describe return values
  radeon: Fix typo and copy/paste error in comments
  doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c
  various: Fix spelling of "asynchronous" in comments.
  Fix misspellings of "whether" in comments.
  eisa: Fix spelling of "asynchronous".
  various: Fix spelling of "registered" in comments.
  doc: fix quite a few typos within Documentation
  target: iscsi: fix comment typos in target/iscsi drivers
  treewide: fix typo of "suport" in various comments and Kconfig
  treewide: fix typo of "suppport" in various comments
  ...
2012-12-13 12:00:02 -08:00
Masanari Iida
9c7682075e treewide: Fix typos in various drivers
Fix typos in printk within various drivers.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-03 11:05:04 +01:00