commit 428080c9b1 upstream.
In preparation for implementing rigorous build time checks to enforce
that only code that can support it will be called from the early 1:1
mapping of memory, move SEV init code that is called in this manner to
the .head.text section.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240227151907.387873-19-ardb+git@google.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0f4a1e8098 upstream.
SEV-SNP requires encrypted memory to be validated before access.
Because the ROM memory range is not part of the e820 table, it is not
pre-validated by the BIOS. Therefore, if a SEV-SNP guest kernel wishes
to access this range, the guest must first validate the range.
The current SEV-SNP code does indeed scan the ROM range during early
boot and thus attempts to validate the ROM range in probe_roms().
However, this behavior is neither sufficient nor necessary for the
following reasons:
* With regards to sufficiency, if EFI_CONFIG_TABLES are not enabled and
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK is set, the kernel will
attempt to access the memory at SMBIOS_ENTRY_POINT_SCAN_START (which
falls in the ROM range) prior to validation.
For example, Project Oak Stage 0 provides a minimal guest firmware
that currently meets these configuration conditions, meaning guests
booting atop Oak Stage 0 firmware encounter a problematic call chain
during dmi_setup() -> dmi_scan_machine() that results in a crash
during boot if SEV-SNP is enabled.
* With regards to necessity, SEV-SNP guests generally read garbage
(which changes across boots) from the ROM range, meaning these scans
are unnecessary. The guest reads garbage because the legacy ROM range
is unencrypted data but is accessed via an encrypted PMD during early
boot (where the PMD is marked as encrypted due to potentially mapping
actually-encrypted data in other PMD-contained ranges).
In one exceptional case, EISA probing treats the ROM range as
unencrypted data, which is inconsistent with other probing.
Continuing to allow SEV-SNP guests to use garbage and to inconsistently
classify ROM range encryption status can trigger undesirable behavior.
For instance, if garbage bytes appear to be a valid signature, memory
may be unnecessarily reserved for the ROM range. Future code or other
use cases may result in more problematic (arbitrary) behavior that
should be avoided.
While one solution would be to overhaul the early PMD mapping to always
treat the ROM region of the PMD as unencrypted, SEV-SNP guests do not
currently rely on data from the ROM region during early boot (and even
if they did, they would be mostly relying on garbage data anyways).
As a simpler solution, skip the ROM range scans (and the otherwise-
necessary range validation) during SEV-SNP guest early boot. The
potential SEV-SNP guest crash due to lack of ROM range validation is
thus avoided by simply not accessing the ROM range.
In most cases, skip the scans by overriding problematic x86_init
functions during sme_early_init() to SNP-safe variants, which can be
likened to x86_init overrides done for other platforms (ex: Xen); such
overrides also avoid the spread of cc_platform_has() checks throughout
the tree.
In the exceptional EISA case, still use cc_platform_has() for the
simplest change, given (1) checks for guest type (ex: Xen domain status)
are already performed here, and (2) these checks occur in a subsys
initcall instead of an x86_init function.
[ bp: Massage commit message, remove "we"s. ]
Fixes: 9704c07bf9 ("x86/kernel: Validate ROM memory before accessing when SEV-SNP is active")
Signed-off-by: Kevin Loughlin <kevinloughlin@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20240313121546.2964854-1-kevinloughlin@google.com
Signed-off-by: Kevin Loughlin <kevinloughlin@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The bare metal decompressor code was never really intended to run in a
hosted environment such as the EFI boot services, and does a few things
that are becoming problematic in the context of EFI boot now that the
logo requirements are getting tighter: EFI executables will no longer be
allowed to consist of a single executable section that is mapped with
read, write and execute permissions if they are intended for use in a
context where Secure Boot is enabled (and where Microsoft's set of
certificates is used, i.e., every x86 PC built to run Windows).
To avoid stepping on reserved memory before having inspected the E820
tables, and to ensure the correct placement when running a kernel build
that is non-relocatable, the bare metal decompressor moves its own
executable image to the end of the allocation that was reserved for it,
in order to perform the decompression in place. This means the region in
question requires both write and execute permissions, which either need
to be given upfront (which EFI will no longer permit), or need to be
applied on demand using the existing page fault handling framework.
However, the physical placement of the kernel is usually randomized
anyway, and even if it isn't, a dedicated decompression output buffer
can be allocated anywhere in memory using EFI APIs when still running in
the boot services, given that EFI support already implies a relocatable
kernel. This means that decompression in place is never necessary, nor
is moving the compressed image from one end to the other.
Since EFI already maps all of memory 1:1, it is also unnecessary to
create new page tables or handle page faults when decompressing the
kernel. That means there is also no need to replace the special
exception handlers for SEV. Generally, there is little need to do
any of the things that the decompressor does beyond
- initialize SEV encryption, if needed,
- perform the 4/5 level paging switch, if needed,
- decompress the kernel
- relocate the kernel
So do all of this from the EFI stub code, and avoid the bare metal
decompressor altogether.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230807162720.545787-24-ardb@kernel.org
Before refactoring the EFI stub boot flow to avoid the legacy bare metal
decompressor, duplicate the SNP feature check in the EFI stub before
handing over to the kernel proper.
The SNP feature check can be performed while running under the EFI boot
services, which means it can force the boot to fail gracefully and
return an error to the bootloader if the loaded kernel does not
implement support for all the features that the hypervisor enabled.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230807162720.545787-23-ardb@kernel.org
the usage patterns are becoming apparent
-----BEGIN PGP SIGNATURE-----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=Aj6p
-----END PGP SIGNATURE-----
Merge tag 'x86_sev_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- Some SEV and CC platform helpers cleanup and simplifications now that
the usage patterns are becoming apparent
[ I'm sure I'm the only one that has gets confused by all the TLAs, but
in case there are others: here SEV is AMD's "Secure Encrypted
Virtualization" and CC is generic "Confidential Computing".
There's also Intel SGX (Software Guard Extensions) and TDX (Trust
Domain Extensions), along with all the vendor memory encryption
extensions (SME, TSME, TME, and WTF).
And then we have arm64 with RMA and CCA, and I probably forgot another
dozen or so related acronyms - Linus ]
* tag 'x86_sev_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/coco: Get rid of accessor functions
x86/sev: Get rid of special sev_es_enable_key
x86/coco: Mark cc_platform_has() and descendants noinstr
Add SNP-specific hooks to the unaccepted memory support in the boot
path (__accept_memory()) and the core kernel (accept_memory()) in order
to support booting SNP guests when unaccepted memory is present. Without
this support, SNP guests will fail to boot and/or panic() when unaccepted
memory is present in the EFI memory map.
The process of accepting memory under SNP involves invoking the hypervisor
to perform a page state change for the page to private memory and then
issuing a PVALIDATE instruction to accept the page.
Since the boot path and the core kernel paths perform similar operations,
move the pvalidate_pages() and vmgexit_psc() functions into sev-shared.c
to avoid code duplication.
Create the new header file arch/x86/boot/compressed/sev.h because adding
the function declaration to any of the existing SEV related header files
pulls in too many other header files, causing the build to fail.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/a52fa69f460fd1876d70074b20ad68210dfc31dd.1686063086.git.thomas.lendacky@amd.com
In advance of providing support for unaccepted memory, request 2M Page
State Change (PSC) requests when the address range allows for it. By using
a 2M page size, more PSC operations can be handled in a single request to
the hypervisor. The hypervisor will determine if it can accommodate the
larger request by checking the mapping in the nested page table. If mapped
as a large page, then the 2M page request can be performed, otherwise the
2M page request will be broken down into 512 4K page requests. This is
still more efficient than having the guest perform multiple PSC requests
in order to process the 512 4K pages.
In conjunction with the 2M PSC requests, attempt to perform the associated
PVALIDATE instruction of the page using the 2M page size. If PVALIDATE
fails with a size mismatch, then fallback to validating 512 4K pages. To
do this, page validation is modified to work with the PSC structure and
not just a virtual address range.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/050d17b460dfc237b51d72082e5df4498d3513cb.1686063086.git.thomas.lendacky@amd.com
When calculating an end address based on an unsigned int number of pages,
any value greater than or equal to 0x100000 that is shift PAGE_SHIFT bits
results in a 0 value, resulting in an invalid end address. Change the
number of pages variable in various routines from an unsigned int to an
unsigned long to calculate the end address correctly.
Fixes: 5e5ccff60a ("x86/sev: Add helper for validating pages in early enc attribute changes")
Fixes: dc3f3d2474 ("x86/mm: Validate memory when changing the C-bit")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/6a6e4eea0e1414402bac747744984fa4e9c01bb6.1686063086.git.thomas.lendacky@amd.com
A SEV-ES guest is active on AMD when CC_ATTR_GUEST_STATE_ENCRYPT is set.
I.e., MSR_AMD64_SEV, bit 1, SEV_ES_Enabled. So no need for a special
static key.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230328201712.25852-3-bp@alien8.de
The GHCB specification declares that the firmware error value for
a guest request will be stored in the lower 32 bits of EXIT_INFO_2. The
upper 32 bits are for the VMM's own error code. The fw_err argument to
snp_guest_issue_request() is thus a misnomer, and callers will need
access to all 64 bits.
The type of unsigned long also causes problems, since sw_exit_info2 is
u64 (unsigned long long) vs the argument's unsigned long*. Change this
type for issuing the guest request. Pass the ioctl command struct's error
field directly instead of in a local variable, since an incomplete guest
request may not set the error code, and uninitialized stack memory would
be written back to user space.
The firmware might not even be called, so bookend the call with the no
firmware call error and clear the error.
Since the "fw_err" field is really exitinfo2 split into the upper bits'
vmm error code and lower bits' firmware error code, convert the 64 bit
value to a union.
[ bp:
- Massage commit message
- adjust code
- Fix a build issue as
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202303070609.vX6wp2Af-lkp@intel.com
- print exitinfo2 in hex
Tom:
- Correct -EIO exit case. ]
Signed-off-by: Dionna Glaze <dionnaglaze@google.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230214164638.1189804-5-dionnaglaze@google.com
Link: https://lore.kernel.org/r/20230307192449.24732-12-bp@alien8.de
Mark both the function prototype and definition as noreturn in order to
prevent the compiler from doing transformations which confuse objtool
like so:
vmlinux.o: warning: objtool: sme_enable+0x71: unreachable instruction
This triggers with gcc-12.
Add it and sev_es_terminate() to the objtool noreturn tracking array
too. Sort it while at it.
Suggested-by: Michael Matz <matz@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220824152420.20547-1-bp@alien8.de
This reverts commit 007faec014.
Now that hyperv does its own protocol negotiation:
49d6a3c062 ("x86/Hyper-V: Add SEV negotiate protocol support in Isolation VM")
revert this exposure of the sev_es_ghcb_hv_call() helper.
Cc: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by：Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/r/20220614014553.1915929-1-ltykernel@gmail.com
The GHCB specification section 2.7 states that when SEV-SNP is enabled,
a guest should not rely on the hypervisor to provide the address of the
AP jump table. Instead, if a guest BIOS wants to provide an AP jump
table, it should record the address in the SNP secrets page so the guest
operating system can obtain it directly from there.
Fix this on the guest kernel side by having SNP guests use the AP jump
table address published in the secrets page rather than issuing a GHCB
request to get it.
[ mroth:
- Improve error handling when ioremap()/memremap() return NULL
- Don't mix function calls with declarations
- Add missing __init
- Tweak commit message ]
Fixes: 0afb6b660a ("x86/sev: Use SEV-SNP AP creation to start secondary CPUs")
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220422135624.114172-3-michael.roth@amd.com
During patch review, it was decided the SNP guest driver name should not
be SEV-SNP specific, but should be generic for use with anything SEV.
However, this feedback was missed and the driver name, and many of the
driver functions and structures, are SEV-SNP name specific. Rename the
driver to "sev-guest" (to match the misc device that is created) and
update some of the function and structure names, too.
While in the file, adjust the one pr_err() message to be a dev_err()
message so that the message, if issued, uses the driver name.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/307710bb5515c9088a19fd0b930268c7300479b2.1650464054.git.thomas.lendacky@amd.com
Version 2 of the GHCB specification provides a Non Automatic Exit (NAE)
event type that can be used by the SEV-SNP guest to communicate with the
PSP without risk from a malicious hypervisor who wishes to read, alter,
drop or replay the messages sent.
SNP_LAUNCH_UPDATE can insert two special pages into the guest’s memory:
the secrets page and the CPUID page. The PSP firmware populates the
contents of the secrets page. The secrets page contains encryption keys
used by the guest to interact with the firmware. Because the secrets
page is encrypted with the guest’s memory encryption key, the hypervisor
cannot read the keys. See SEV-SNP firmware spec for further details on
the secrets page format.
Create a platform device that the SEV-SNP guest driver can bind to get
the platform resources such as encryption key and message id to use to
communicate with the PSP. The SEV-SNP guest driver provides a userspace
interface to get the attestation report, key derivation, extended
attestation report etc.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-43-brijesh.singh@amd.com
Version 2 of GHCB specification provides SNP_GUEST_REQUEST and
SNP_EXT_GUEST_REQUEST NAE that can be used by the SNP guest to
communicate with the PSP.
While at it, add a snp_issue_guest_request() helper that will be used by
driver or other subsystem to issue the request to PSP.
See SEV-SNP firmware and GHCB spec for more details.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-42-brijesh.singh@amd.com
Initial/preliminary detection of SEV-SNP is done via the Confidential
Computing blob. Check for it prior to the normal SEV/SME feature
initialization, and add some sanity checks to confirm it agrees with
SEV-SNP CPUID/MSR bits.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-39-brijesh.singh@amd.com
Initial/preliminary detection of SEV-SNP is done via the Confidential
Computing blob. Check for it prior to the normal SEV/SME feature
initialization, and add some sanity checks to confirm it agrees with
SEV-SNP CPUID/MSR bits.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-35-brijesh.singh@amd.com
While launching encrypted guests, the hypervisor may need to provide
some additional information during the guest boot. When booting under an
EFI-based BIOS, the EFI configuration table contains an entry for the
confidential computing blob that contains the required information.
To support booting encrypted guests on non-EFI VMs, the hypervisor
needs to pass this additional information to the guest kernel using a
different method.
For this purpose, introduce SETUP_CC_BLOB type in setup_data to hold
the physical address of the confidential computing blob location. The
boot loader or hypervisor may choose to use this method instead of an
EFI configuration table. The CC blob location scanning should give
preference to a setup_data blob over an EFI configuration table.
In AMD SEV-SNP, the CC blob contains the address of the secrets and
CPUID pages. The secrets page includes information such as a VM to PSP
communication key and the CPUID page contains PSP-filtered CPUID values.
Define the AMD SEV confidential computing blob structure.
While at it, define the EFI GUID for the confidential computing blob.
[ bp: Massage commit message, mark struct __packed. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220307213356.2797205-30-brijesh.singh@amd.com
To provide a more secure way to start APs under SEV-SNP, use the SEV-SNP
AP Creation NAE event. This allows for guest control over the AP register
state rather than trusting the hypervisor with the SEV-ES Jump Table
address.
During native_smp_prepare_cpus(), invoke an SEV-SNP function that, if
SEV-SNP is active, will set/override apic->wakeup_secondary_cpu. This
will allow the SEV-SNP AP Creation NAE event method to be used to boot
the APs. As a result of installing the override when SEV-SNP is active,
this method of starting the APs becomes the required method. The override
function will fail to start the AP if the hypervisor does not have
support for AP creation.
[ bp: Work in forgotten review comments. ]
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-23-brijesh.singh@amd.com
Add the needed functionality to change pages state from shared
to private and vice-versa using the Page State Change VMGEXIT as
documented in the GHCB spec.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-22-brijesh.singh@amd.com
early_set_memory_{encrypted,decrypted}() are used for changing the page
state from decrypted (shared) to encrypted (private) and vice versa.
When SEV-SNP is active, the page state transition needs to go through
additional steps.
If the page is transitioned from shared to private, then perform the
following after the encryption attribute is set in the page table:
1. Issue the page state change VMGEXIT to add the page as a private
in the RMP table.
2. Validate the page after its successfully added in the RMP table.
To maintain the security guarantees, if the page is transitioned from
private to shared, then perform the following before clearing the
encryption attribute from the page table.
1. Invalidate the page.
2. Issue the page state change VMGEXIT to make the page shared in the
RMP table.
early_set_memory_{encrypted,decrypted}() can be called before the GHCB
is setup so use the SNP page state MSR protocol VMGEXIT defined in the
GHCB specification to request the page state change in the RMP table.
While at it, add a helper snp_prep_memory() which will be used in
probe_roms(), in a later patch.
[ bp: Massage commit message. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220307213356.2797205-19-brijesh.singh@amd.com
The SEV-SNP guest is required by the GHCB spec to register the GHCB's
Guest Physical Address (GPA). This is because the hypervisor may prefer
that a guest uses a consistent and/or specific GPA for the GHCB associated
with a vCPU. For more information, see the GHCB specification section
"GHCB GPA Registration".
[ bp: Cleanup comments. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-18-brijesh.singh@amd.com
The Virtual Machine Privilege Level (VMPL) feature in the SEV-SNP
architecture allows a guest VM to divide its address space into four
levels. The level can be used to provide hardware isolated abstraction
layers within a VM. VMPL0 is the highest privilege level, and VMPL3 is
the least privilege level. Certain operations must be done by the VMPL0
software, such as:
* Validate or invalidate memory range (PVALIDATE instruction)
* Allocate VMSA page (RMPADJUST instruction when VMSA=1)
The initial SNP support requires that the guest kernel is running at
VMPL0. Add such a check to verify the guest is running at level 0 before
continuing the boot. There is no easy method to query the current VMPL
level, so use the RMPADJUST instruction to determine whether the guest
is running at the VMPL0.
[ bp: Massage commit message. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-15-brijesh.singh@amd.com
An SNP-active guest uses the PVALIDATE instruction to validate or
rescind the validation of a guest page’s RMP entry. Upon completion, a
return code is stored in EAX and rFLAGS bits are set based on the return
code. If the instruction completed successfully, the carry flag (CF)
indicates if the content of the RMP were changed or not.
See AMD APM Volume 3 for additional details.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220307213356.2797205-14-brijesh.singh@amd.com
Version 2 of the GHCB specification added the advertisement of features
that are supported by the hypervisor. If the hypervisor supports SEV-SNP
then it must set the SEV-SNP features bit to indicate that the base
functionality is supported.
Check that feature bit while establishing the GHCB; if failed, terminate
the guest.
Version 2 of the GHCB specification adds several new Non-Automatic Exits
(NAEs), most of them are optional except the hypervisor feature. Now
that the hypervisor feature NAE is implemented, bump the GHCB maximum
supported protocol version.
While at it, move the GHCB protocol negotiation check from the #VC
exception handler to sev_enable() so that all feature detection happens
before the first #VC exception.
While at it, document why the GHCB page cannot be setup from
load_stage2_idt().
[ bp: Massage commit message. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-13-brijesh.singh@amd.com
The SEV-ES guest calls sev_es_negotiate_protocol() to negotiate the GHCB
protocol version before establishing the GHCB. Cache the negotiated GHCB
version so that it can be used later.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220307213356.2797205-12-brijesh.singh@amd.com
Hyper-V needs to issue the GHCB HV call in order to read/write MSRs in
Isolation VMs. For that, expose sev_es_ghcb_hv_call().
The Hyper-V Isolation VMs are unenlightened guests and run a paravisor
at VMPL0 for communicating. GHCB pages are being allocated and set up
by that paravisor. Linux gets the GHCB page's physical address via
MSR_AMD64_SEV_ES_GHCB from the paravisor and should not change it.
Add a @set_ghcb_msr parameter to sev_es_ghcb_hv_call() to control
whether the function should set the GHCB's address prior to the call or
not and export that function for use by HyperV.
[ bp: - Massage commit message
- add a struct ghcb forward declaration to fix randconfig builds. ]
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20211025122116.264793-6-ltykernel@gmail.com
The guest and the hypervisor contain separate macros to get and set
the GHCB MSR protocol and NAE event fields. Consolidate the GHCB
protocol definitions and helper macros in one place.
Leave the supported protocol version define in separate files to keep
the guest and hypervisor flexibility to support different GHCB version
in the same release.
There is no functional change intended.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lkml.kernel.org/r/20210427111636.1207-3-brijesh.singh@amd.com
SEV-SNP builds upon the SEV-ES functionality while adding new hardware
protection. Version 2 of the GHCB specification adds new NAE events that
are SEV-SNP specific. Rename the sev-es.{ch} to sev.{ch} so that all
SEV* functionality can be consolidated in one place.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lkml.kernel.org/r/20210427111636.1207-2-brijesh.singh@amd.com
2021-05-10 07:40:27 +02:00
Renamed from arch/x86/include/asm/sev-es.h (Browse further)
