Commit graph

82 commits

Author SHA1 Message Date
Steven Whitehouse
8d1235852b GFS2: Make . and .. qstrs constant
Rather than calculating the qstrs for . and .. each time
we need them, its better to keep a constant version of
these and just refer to them when required.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
2010-09-20 11:21:09 +01:00
Steven Whitehouse
a2e0f79939 GFS2: Remove i_disksize
With the update of the truncate code, ip->i_disksize and
inode->i_size are merely copies of each other. This means
we can remove ip->i_disksize and use inode->i_size exclusively
reducing the size of a GFS2 inode by 8 bytes.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-09-20 11:18:29 +01:00
David Rientjes
4244b52e18 GFS2: remove dependency on __GFP_NOFAIL
The k[mc]allocs in dr_split_leaf() and dir_double_exhash() are failable,
so remove __GFP_NOFAIL from their masks.

Cc: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-07-29 09:37:18 +01:00
Steven Whitehouse
d2a97a4e99 GFS2: Use kmalloc when possible for ->readdir()
If we don't need a huge amount of memory in ->readdir() then
we can use kmalloc rather than vmalloc to allocate it. This
should cut down on the greater overheads associated with
vmalloc for smaller directories.

We may be able to eliminate vmalloc entirely at some stage,
but this is easy to do right away.

Also using GFP_NOFS to avoid any issues wrt to deleting inodes
while under a glock, and suggestion from Linus to factor out
the alloc/dealloc.

I've given this a test with a variety of different sized
directories and it seems to work ok.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-28 11:10:03 -07:00
Bob Peterson
728a756b8f GFS2: rename causes kernel Oops
This patch fixes a kernel Oops in the GFS2 rename code.

The problem was in the way the gfs2 directory code was trying
to re-use sentinel directory entries.

In the failing case, gfs2's rename function was renaming a
file to another name that had the same non-trivial length.
The file being renamed happened to be the first directory
entry on the leaf block.

First, the rename code (gfs2_rename in ops_inode.c) found the
original directory entry and decided it could do its job by
simply replacing the directory entry with another.  Therefore
it determined correctly that no block allocations were needed.

Next, the rename code deleted the old directory entry prior to
replacing it with the new name.  Therefore, the soon-to-be
replaced directory entry was temporarily made into a directory
entry "sentinel" or a place holder at the start of a leaf block.

Lastly, it went to re-add the replacement directory entry in
that leaf block.  However, when gfs2_dirent_find_space was
looking for space in the leaf block, it used the wrong value
for the sentinel.  That threw off its calculations so later
it decides it can't really re-use the sentinel and therefore
must allocate a new leaf block.  But because it previously decided
to re-use the directory entry, it didn't waste the time to
grab a new block allocation for the inode.  Therefore, the
inode's i_alloc pointer was still NULL and it crashes trying to
reference it.

In the case of sentinel directory entries, the entire dirent is
reused, not just the "free space" portion of it, and therefore
the function gfs2_dirent_find_space should use the value 0
rather than GFS2_DIRENT_SIZE(0) for the actual dirent size.

Fixing this calculation enables the reproducer programs to work
properly.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-07-15 09:07:56 +01:00
Bob Peterson
1a0eae8848 GFS2: glock livelock
This patch fixes a couple gfs2 problems with the reclaiming of
unlinked dinodes.  First, there were a couple of livelocks where
everything would come to a halt waiting for a glock that was
seemingly held by a process that no longer existed.  In fact, the
process did exist, it just had the wrong pid number in the holder
information.  Second, there was a lock ordering problem between
inode locking and glock locking.  Third, glock/inode contention
could sometimes cause inodes to be improperly marked invalid by
iget_failed.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2010-04-14 16:48:05 +01:00
Steven Whitehouse
1579343a73 GFS2: Remove dirent_first() function
This function only had one caller left, and that caller only
called it for leaf blocks, hence one branch of the "if" was
never taken. In addition the call to get_left had already
verified the metadata type, so the function can be reduced
to a single line of code in its caller.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-12-03 11:57:23 +00:00
Steven Whitehouse
0901097834 GFS2: Improve resource group error handling
This patch improves the error handling in the case where we
discover that the summary information in the resource group
doesn't match the bitmap information while in the process of
allocating blocks. Originally this resulted in a kernel bug,
but this patch changes that so that we return -EIO and print
some messages explaining what went wrong, and how to fix it.

We also remember locally not to try and allocate from the
same rgrp again, so that a subsequent allocation in a
different rgrp should succeed.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-05-20 10:48:47 +01:00
Steven Whitehouse
f057f6cdf6 GFS2: Merge lock_dlm module into GFS2
This is the big patch that I've been working on for some time
now. There are many reasons for wanting to make this change
such as:
 o Reducing overhead by eliminating duplicated fields between structures
 o Simplifcation of the code (reduces the code size by a fair bit)
 o The locking interface is now the DLM interface itself as proposed
   some time ago.
 o Fewer lookups of glocks when processing replies from the DLM
 o Fewer memory allocations/deallocations for each glock
 o Scope to do further optimisations in the future (but this patch is
   more than big enough for now!)

Please note that (a) this patch relates to the lock_dlm module and
not the DLM itself, that is still a separate module; and (b) that
we retain the ability to build GFS2 as a standalone single node
filesystem with out requiring the DLM.

This patch needs a lot of testing, hence my keeping it I restarted
my -git tree after the last merge window. That way, this has the maximum
exposure before its merged. This is (modulo a few minor bug fixes) the
same patch that I've been posting on and off the the last three months
and its passed a number of different tests so far.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-03-24 11:21:14 +00:00
Steven Whitehouse
383f01fbf4 GFS2: Banish struct gfs2_dinode_host
The final field in gfs2_dinode_host was the i_flags field. Thats
renamed to i_diskflags in order to avoid confusion with the existing
inode flags, and moved into the inode proper at a suitable location
to avoid creating a "hole".

At that point struct gfs2_dinode_host is no longer needed and as
promised (quite some time ago!) it can now be removed completely.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-01-05 07:38:59 +00:00
Steven Whitehouse
c9e9888677 GFS2: Move i_size from gfs2_dinode_host and rename it to i_disksize
This patch moved the i_size field from the gfs2_dinode_host and
following the ext3 convention renames it i_disksize.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-01-05 07:38:58 +00:00
Steven Whitehouse
ad6203f2b4 GFS2: Move "entries" into "proper" inode
This moves the directory entry count into the proper inode.
Potentially we could get this to share the space used by
something else in the future, but this is one more step
on the way to removing the gfs2_dinode_host structure.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-01-05 07:38:56 +00:00
Josef Bacik
16c5f06f15 [GFS2] fix GFP_KERNEL misuses
There are several places where GFP_KERNEL allocations happen under a glock,
which will result in hangs if we're under memory pressure and go to re-enter the
fs in order to flush stuff out.  This patch changes the culprits to GFS_NOFS to
keep this problem from happening.  Thank you,

Signed-off-by: Josef Bacik <jbacik@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-04-10 09:55:26 +01:00
Cyrill Gorcunov
182fe5abd8 [GFS2] possible null pointer dereference fixup
gfs2_alloc_get may fail so we have to check it to prevent
NULL pointer dereference.

Signed-off-by: Cyrill Gorcunov <gorcunov@gamil.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31 10:41:28 +01:00
Steven Whitehouse
9b8c81d1de [GFS2] Allow bmap to allocate extents
We've supported mapping of extents when no block allocation is required
for some time. This patch extends that to mapping of extents when an
allocation has been requested. In that case we try to allocate as many
blocks as are requested, but we might return fewer in case there is
something preventing us from returning the complete amount (e.g. an
already allocated block is in the way).

Currently the only code path which can actually request multiple data
blocks in a single bmap call is the page_mkwrite path and even then it
only happens if there are multiple blocks per page. What this patch does
do however, is merge the allocation requests for metadata (growing the
metadata tree in either height or depth) with the allocation of the data
blocks in the case that both are needed. This results in lower overheads
even in the single block allocation case.

The one thing which we can't handle here at the moment is unstuffing. I
would like to be able to do that, but the problem which arises is that
in order to unstuff one has to get a locked page from the page cache
which results in locking problems in the (usual) case that the caller is
holding the page lock on the page it wishes to map. So that case will
have to be addressed in future patches.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31 10:41:14 +01:00
Marcin Slusarz
bb16b342b2 [GFS2] be*_add_cpu conversion
replace all:
big_endian_variable = cpu_to_beX(beX_to_cpu(big_endian_variable) +
					expression_in_cpu_byteorder);
with:
	beX_add_cpu(&big_endian_variable, expression_in_cpu_byteorder);
generated with semantic patch

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31 10:41:03 +01:00
Steven Whitehouse
77658aad22 [GFS2] Eliminate (almost) duplicate field from gfs2_inode
The blocks counter is almost a duplicate of the i_blocks
field in the VFS inode. The only difference is that i_blocks
can be only 32bits long for 32bit arch without large single file
support. Since GFS2 doesn't handle the non-large single file
case (for 32 bit anyway) this adds a new config dependency on
64BIT || LSF. This has always been the case, however we've never
explicitly said so before.

Even if we do add support for the non-LSF case, we will still
not require this field to be duplicated since we will not be
able to access oversized files anyway.

So the net result of all this is that we shave 8 bytes from a gfs2_inode
and get our config deps correct.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31 10:40:55 +01:00
Steven Whitehouse
b45e41d7d5 [GFS2] Add extent allocation to block allocator
Rather than having to allocate a single block at a time, this patch
allows the block allocator to allocate an extent. Since there is
no difference (so far as the block allocator is concerned) between
data blocks and indirect blocks, it is posible to allocate a single
extent and for the caller to unrevoke just the blocks required
for indirect blocks.

Currently the only bit of GFS2 to make use of this feature is the
build height function. The intention is that gfs2_block_map will
be changed to make use of this feature in future patches.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31 10:40:47 +01:00
Steven Whitehouse
1639431a3f [GFS2] Merge gfs2_alloc_meta and gfs2_alloc_data
Thanks to the preceeding patches, the only difference between
these two functions is their name. We can thus merge them
and call the new function gfs2_alloc_block to reflect the
fact that it can allocate either kind of block.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31 10:40:45 +01:00
Steven Whitehouse
5731be53e3 [GFS2] Update gfs2_trans_add_unrevoke to accept extents
By adding an extra argument to gfs2_trans_add_unrevoke we can now
specify an extent length of blocks to unrevoke. This means that
we only need to make one pass through the list for each extent
rather than each block. Currently the only extent length which
is used is 1, but that will change in the future.

Also gfs2_trans_add_unrevoke is removed from gfs2_alloc_meta
since its the only difference between this and gfs2_alloc_data
which is left. This will allow a future patch to merge these
two functions into one (i.e. one call to allocate both data
and metadata in a single extent in the future).

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31 10:40:42 +01:00
Steven Whitehouse
9a0045088d [GFS2] Shrink & rename di_depth
This patch forms a pair with the previous patch which shrunk
di_height. Like that patch di_depth is renamed i_depth and moved
into struct gfs2_inode directly. Also the field goes from 16 bits
to 8 bits since it is also limited to a max value which is rather
small (17 in this case). In addition we also now validate the field
against this maximum value when its read in.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31 10:40:31 +01:00
Bob Peterson
fe6c991c52 [GFS2] Get rid of unneeded parameter in gfs2_rlist_alloc
This patch removed the unnecessary parameter from function
gfs2_rlist_alloc.  The parameter was always passed in as 0.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31 10:39:49 +01:00
David Howells
e231c2ee64 Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p)
Convert instances of ERR_PTR(PTR_ERR(p)) to ERR_CAST(p) using:

perl -spi -e 's/ERR_PTR[(]PTR_ERR[(](.*)[)][)]/ERR_CAST(\1)/' `grep -rl 'ERR_PTR[(]*PTR_ERR' fs crypto net security`

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:26 -08:00
Steven Whitehouse
6dbd822487 [GFS2] Reduce inode size by moving i_alloc out of line
It is possible to reduce the size of GFS2 inodes by taking the i_alloc
structure out of the gfs2_inode. This patch allocates the i_alloc
structure whenever its needed, and frees it afterward. This decreases
the amount of low memory we use at the expense of requiring a memory
allocation for each page or partial page that we write. A quick test
with postmark shows that the overhead is not measurable and I also note
that OCFS2 use the same approach.

In the future I'd like to solve the problem by shrinking down the size
of the members of the i_alloc structure, but for now, this reduces the
immediate problem of using too much low-memory on x86 and doesn't add
too much overhead.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25 08:18:25 +00:00
Benjamin Marzinski
7a9f53b3c1 [GFS2] Alternate gfs2_iget to avoid looking up inodes being freed
There is a possible deadlock between two processes on the same node, where one
process is deleting an inode, and another process is looking for allocated but
unused inodes to delete in order to create more space.

process A does an iput() on inode X, and it's i_count drops to 0. This causes
iput_final() to be called, which puts an inode into state I_FREEING at
generic_delete_inode(). There no point between when iput_final() is called, and
when I_FREEING is set where GFS2 could acquire any glocks. Once I_FREEING is
set, no other process on that node can successfully look up that inode until
the delete finishes.

process B locks the the resource group for the same inode in get_local_rgrp(),
which is called by gfs2_inplace_reserve_i()

process A tries to lock the resource group for the inode in
gfs2_dinode_dealloc(), but it's already locked by process B

process B waits in find_inode for the inode to have the I_FREEING state cleared.

Deadlock.

This patch solves the problem by adding an alternative to gfs2_iget(),
gfs2_iget_skip(), that simply skips any inodes that are in the I_FREEING
state.o The alternate test function is just like the original one, except that
it fails if the inode is being freed, and sets a skipped flag. The alternate
set function is just like the original, except that it fails if the skipped
flag is set. Only try_rgrp_unlink() calls gfs2_iget_skip() instead of
gfs2_iget().

Signed-off-by: Benjamin E. Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-10-10 08:56:29 +01:00
Steven Whitehouse
382e6e256b [GFS2] Add a missing gfs2_trans_add_bh()
This was missing from the dir_split_leaf() function although in
most cases its not a problem due to other functions having
already previously called gfs2_trans_add_bh. This makes certain
that it is correct.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Wendy Cheng <wcheng@redhat.com>
2007-10-10 08:55:32 +01:00
Wendy Cheng
bb9bcf0616 [GFS2] Obtaining no_formal_ino from directory entry
GFS2 lookup code doesn't ask for inode shared glock. This implies during
in-memory inode creation for existing file, GFS2 will not disk-read in
the inode contents. This leaves no_formal_ino un-initialized during
lookup time. The un-initialized no_formal_ino is subsequently encoded
into file handle. Clients will get ESTALE error whenever it tries to
access these files.

Signed-off-by: S. Wendy Cheng <wcheng@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:24:08 +01:00
Steven Whitehouse
4bd91ba181 [GFS2] Add nanosecond timestamp feature
This adds a nanosecond timestamp feature to the GFS2 filesystem. Due
to the way that the on-disk format works, older filesystems will just
appear to have this field set to zero. When mounted by an older version
of GFS2, the filesystem will simply ignore the extra fields so that
it will again appear to have whole second resolution, so that its
trivially backward compatible.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:23:12 +01:00
Steven Whitehouse
bb8d8a6f54 [GFS2] Fix sign problem in quota/statfs and cleanup _host structures
This patch fixes some sign issues which were accidentally introduced
into the quota & statfs code during the endianess annotation process.
Also included is a general clean up which moves all of the _host
structures out of gfs2_ondisk.h (where they should not have been to
start with) and into the places where they are actually used (often only
one place). Also those _host structures which are not required any more
are removed entirely (which is the eventual plan for all of them).

The conversion routines from ondisk.c are also moved into the places
where they are actually used, which for almost every one, was just one
single place, so all those are now static functions. This also cleans up
the end of gfs2_ondisk.h which no longer needs the #ifdef __KERNEL__.

The net result is a reduction of about 100 lines of code, many functions
now marked static plus the bug fixes as mentioned above. For good
measure I ran the code through sparse after making these changes to
check that there are no warnings generated.

This fixes Red Hat bz #239686

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:23:10 +01:00
Steven Whitehouse
dbb7cae2a3 [GFS2] Clean up inode number handling
This patch cleans up the inode number handling code. The main difference
is that instead of looking up the inodes using a struct gfs2_inum_host
we now use just the no_addr member of this structure. The tests relating
to no_formal_ino can then be done by the calling code. This has
advantages in that we want to do different things in different code
paths if the no_formal_ino doesn't match. In the NFS patch we want to
return -ESTALE, but in the ->lookup() path, its a bug in the fs if the
no_formal_ino doesn't match and thus we can withdraw in this case.

In order to later fix bz #201012, we need to be able to look up an inode
without knowing no_formal_ino, as the only information that is known to
us is the on-disk location of the inode in question.

This patch will also help us to fix bz #236099 at a later date by
cleaning up a lot of the code in that area.

There are no user visible changes as a result of this patch and there
are no changes to the on-disk format either.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:22:24 +01:00
akpm@linux-foundation.org
f391a4ead6 [GFS2] printk warning fixes
alpha:

fs/gfs2/dir.c: In function 'gfs2_dir_read_leaf':
fs/gfs2/dir.c:1322: warning: format '%llu' expects type 'long long unsigned int', but argument 3 has type 'sector_t'
fs/gfs2/dir.c: In function 'gfs2_dir_read':
fs/gfs2/dir.c:1455: warning: format '%llu' expects type 'long long unsigned int', but argument 3 has type '__u64'

Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-01 09:11:48 +01:00
Steven Whitehouse
bdd19a22f8 [GFS2] Patch to detect corrupt number of dir entries in leaf and/or inode blocks
This patch detects when the number of entries in a leaf block or inode
block (in the case of stuffed directories) is corrupt and informs the
user. It prevents us from running off the end of the array thats been
allocated for the sorting in this case,

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-01 09:11:30 +01:00
Tim Schmielau
cd354f1ae7 [PATCH] remove many unneeded #includes of sched.h
After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there.  Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.

To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.

Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm.  I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:54 -08:00
Eric Sandeen
ddfe062783 [GFS2] use CURRENT_TIME_SEC instead of get_seconds in gfs2
I was looking something else up and came across this...

I don't honestly have a good reason to change it other than to make it
like every other Linux filesystem in this regard.  ;-)  It doesn't
functionally change anything, but makes some lines shorter. :)

I'm also curious; why does gfs2 have 64-bits of on-disk timestamps, but
not in timespec_t format, and only stores second resolutions?  Seems like
you're halfway to sub-second resolutions already.

I suppose if that gets implemented then all of the below should
instead be CURRENT_TIME not CURRENT_TIME_SEC.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:37:38 -05:00
Steven Whitehouse
3699e3a44b [GFS2] Clean up/speed up readdir
This removes the extra filldir callback which gfs2 was using to
enclose an attempt at readahead for inodes during readdir. The
code was too complicated and also hurts performance badly in the
case that the getdents64/readdir call isn't being followed by
stat() and it wasn't even getting it right all the time when it
was.

As a result, on my test box an "ls" of a directory containing 250000
files fell from about 7mins (freshly mounted, so nothing cached) to
between about 15 to 25 seconds. When the directory content was cached,
the time taken fell from about 3mins to about 4 or 5 seconds.

Interestingly in the cached case, running "ls -l" once reduced the time
taken for subsequent runs of "ls" to about 6 secs even without this
patch. Now it turns out that there was a special case of glocks being
used for prefetching the metadata, but because of the timeouts for these
locks (set to 10 secs) the metadata was being timed out before it was
being used and this the prefetch code was constantly trying to prefetch
the same data over and over.

Calling "ls -l" meant that the inodes were brought into memory and once
the inodes are cached, the glocks are not disposed of until the inodes
are pushed out of the cache, thus extending the lifetime of the glocks,
and thus bringing down the time for subsequent runs of "ls"
considerably.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:37:04 -05:00
Steven Whitehouse
5e7d65cd9d [GFS2] Make sentinel dirents compatible with gfs1
When deleting directory entries, we set the inum.no_addr to zero
in a dirent when its the first dirent in a block and thus cannot
be merged into the previous dirent as is the usual case. In gfs1,
inum.no_formal_ino was used instead.

This patch changes gfs2 to set both inum.no_addr and inum.no_formal_ino
to zero. It also changes the test from just looking at inum.no_addr to
look at both inum.no_addr and inum.no_formal_ino and a sentinel is
now considered to be a dirent in which _either_ (or both) of them
is set to zero.

This resolves Red Hat bugzillas: #215809, #211465

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30 10:36:20 -05:00
Steven Whitehouse
9e2dbdac3d [GFS2] Remove gfs2_inode_attr_in
This function wasn't really doing the right thing. There was no need
to update the inode size at this point and the updating of the
i_blocks field has now been moved to the places where di_blocks is
updated. A result of this patch and some those preceeding it is that
unlocking a glock is now a much more efficient process, since there
is no longer any requirement to copy data from the gfs2 inode into
the vfs inode at this point.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30 10:34:52 -05:00
Steven Whitehouse
a9583c7983 [GFS2] Shrink gfs2_inode (7) - di_payload_format
This is almost never used. Its there for backward
compatibility with GFS1. It doesn't need its own
field since it can always be calculated from the
inode mode & flags. This saves a bit more space
in the gfs2_inode.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30 10:34:26 -05:00
Steven Whitehouse
1a7b1eed58 [GFS2] Shrink gfs2_inode (6) - di_atime/di_mtime/di_ctime
Remove the di_[amc]time fields and use inode->i_[amc]time
fields instead. This saves 24 bytes from the gfs2_inode.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30 10:34:23 -05:00
Steven Whitehouse
539e5d6b7a [GFS2] Change argument of gfs2_dinode_out
Everywhere this was called, a struct gfs2_inode was available,
but despite that, it was always called with a struct gfs2_dinode
as an argument. By making this change it paves the way to start
eliminating fields duplicated between the kernel's struct inode
and the struct gfs2_dinode.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30 10:33:54 -05:00
Al Viro
b44b84d765 [GFS2] gfs2 misc endianness annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30 10:33:46 -05:00
Al Viro
629a21e7ec [GFS2] split and annotate gfs2_inum
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30 10:33:32 -05:00
Adrian Bunk
b7d8ac3e17 [GFS2] gfs2_dir_read_data(): fix uninitialized variable usage
In the "if (extlen)" case, "bh" was used uninitialized.

This patch changes the code to what seems to have been intended.

Spotted by the Coverity checker.

This patch also removes a pointless "bh = NULL" asignment (the variable
is never accessed again after this point).

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-10-20 09:16:20 -04:00
Adrian Bunk
348acd48f0 [GFS2] fs/gfs2/dir.c:gfs2_dir_write_data(): don't use an uninitialized variable
In the "if (extlen)" case, "new" might be used uninitialized.

Looking at the code, it should be initialized to 0.

Spotted by the Coverity checker.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-10-20 09:15:31 -04:00
Adrian Bunk
abbdbd2065 [GFS2] fs/gfs2/dir.c:gfs2_dir_write_data(): remove dead code
The Coverity checker spotted this obviously dead code.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-10-20 09:14:42 -04:00
Al Viro
a2d7d021d7 [GFS2] gfs2 endianness bug: be16 assigned to be32 field
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-10-20 09:14:08 -04:00
Steven Whitehouse
907b9bceb4 [GFS2/DLM] Fix trailing whitespace
As per Andrew Morton's request, removed trailing whitespace.

Cc: Andrew Morton <akpm@osdl.org>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-25 09:26:04 -04:00
Steven Whitehouse
7276b3b0c7 [GFS2] Tidy up meta_io code
Fix a bug in the directory reading code, where we might have dereferenced
a NULL pointer in case of OOM. Updated the directory code to use the new
& improved version of gfs2_meta_ra() which now returns the first block
that was being read. Previously it was releasing it requiring following
code to grab the block again at each point it was called.

Also turned off readahead on directory lookups since we are reading a
hash table, and therefore reading the entries in order is very
unlikely. Readahead is still used for all other calls to the
directory reading function (e.g. when growing the hash table).

Removed the DIO_START constant. Everywhere this was used, it was
used to unconditionally start i/o aside from a couple of places, so
I've removed it and made the couple of exceptions to this rule into
separate functions.

Also hunted through the other DIO flags and removed them as arguments
from functions which were always called with the same combination of
arguments.

Updated gfs2_meta_indirect_buffer to be a bit more efficient and
hopefully also be a bit easier to read.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-21 17:05:23 -04:00
Fabio Massimo Di Nitto
7d308590ae [GFS2] Export lm_interface to kernel headers
lm_interface.h has a few out of the tree clients such as GFS1
and userland tools.

Right now, these clients keeps a copy of the file in their build tree
that can go out of sync.

Move lm_interface.h to include/linux, export it to userland and
clean up fs/gfs2 to use the new location.

Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-19 08:45:18 -04:00
Jan Engelhardt
c53921248c [GFS2] More style changes
Remove redundant brackets

Signed-off-by: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-07 09:42:56 -04:00