should_we_balance is called for the decision to do load-balancing.
When sched ticks invoke this function, only one CPU should return
true. However, in the current code, two CPUs can return true. The
following situation, where b means busy and i means idle, is an
example, because CPU 0 and CPU 2 return true.
[0, 1] [2, 3]
b b i b
This fix checks if there exists an idle CPU with busy sibling(s)
after looking for a CPU on an idle core. If some idle CPUs with busy
siblings are found, just the first one should do load-balancing.
Fixes: b1bfeab9b0 ("sched/fair: Consider the idle state of the whole core for load balance")
Signed-off-by: Keisuke Nishimura <keisuke.nishimura@inria.fr>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.vnet.ibm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20231031133821.1570861-1-keisuke.nishimura@inria.fr
vruntime of the (on_rq && !0-lag) entity needs to be adjusted when
it gets re-weighted, and the calculations can be simplified based
on the fact that re-weight won't change the w-average of all the
entities. Please check the proofs in comments.
But adjusting vruntime can also cause position change in RB-tree
hence require re-queue to fix up which might be costly. This might
be avoided by deferring adjustment to the time the entity actually
leaves tree (dequeue/pick), but that will negatively affect task
selection and probably not good enough either.
Fixes: 147f3efaa2 ("sched/fair: Implement an EEVDF-like scheduling policy")
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231107090510.71322-2-wuyun.abel@bytedance.com
there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- "kdump: use generic functions to simplify crashkernel reservation in
arch", from Baoquan He. This is mainly cleanups and consolidation of
the "crashkernel=" kernel parameter handling.
- After much discussion, David Laight's "minmax: Relax type checks in
min() and max()" is here. Hopefully reduces some typecasting and the
use of min_t() and max_t().
- A group of patches from Oleg Nesterov which clean up and slightly fix
our handling of reads from /proc/PID/task/... and which remove
task_struct.therad_group.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZUQP9wAKCRDdBJ7gKXxA
jmOAAQDh8sxagQYocoVsSm28ICqXFeaY9Co1jzBIDdNesAvYVwD/c2DHRqJHEiS4
63BNcG3+hM9nwGJHb5lyh5m79nBMRg0=
=On4u
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"As usual, lots of singleton and doubleton patches all over the tree
and there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- 'kdump: use generic functions to simplify crashkernel reservation
in arch', from Baoquan He. This is mainly cleanups and
consolidation of the 'crashkernel=' kernel parameter handling
- After much discussion, David Laight's 'minmax: Relax type checks in
min() and max()' is here. Hopefully reduces some typecasting and
the use of min_t() and max_t()
- A group of patches from Oleg Nesterov which clean up and slightly
fix our handling of reads from /proc/PID/task/... and which remove
task_struct.thread_group"
* tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (64 commits)
scripts/gdb/vmalloc: disable on no-MMU
scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n
.mailmap: add address mapping for Tomeu Vizoso
mailmap: update email address for Claudiu Beznea
tools/testing/selftests/mm/run_vmtests.sh: lower the ptrace permissions
.mailmap: map Benjamin Poirier's address
scripts/gdb: add lx_current support for riscv
ocfs2: fix a spelling typo in comment
proc: test ProtectionKey in proc-empty-vm test
proc: fix proc-empty-vm test with vsyscall
fs/proc/base.c: remove unneeded semicolon
do_io_accounting: use sig->stats_lock
do_io_accounting: use __for_each_thread()
ocfs2: replace BUG_ON() at ocfs2_num_free_extents() with ocfs2_error()
ocfs2: fix a typo in a comment
scripts/show_delta: add __main__ judgement before main code
treewide: mark stuff as __ro_after_init
fs: ocfs2: check status values
proc: test /proc/${pid}/statm
compiler.h: move __is_constexpr() to compiler.h
...
included in this merge do the following:
- Kemeng Shi has contributed some compation maintenance work in the
series "Fixes and cleanups to compaction".
- Joel Fernandes has a patchset ("Optimize mremap during mutual
alignment within PMD") which fixes an obscure issue with mremap()'s
pagetable handling during a subsequent exec(), based upon an
implementation which Linus suggested.
- More DAMON/DAMOS maintenance and feature work from SeongJae Park i the
following patch series:
mm/damon: misc fixups for documents, comments and its tracepoint
mm/damon: add a tracepoint for damos apply target regions
mm/damon: provide pseudo-moving sum based access rate
mm/damon: implement DAMOS apply intervals
mm/damon/core-test: Fix memory leaks in core-test
mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
- In the series "Do not try to access unaccepted memory" Adrian Hunter
provides some fixups for the recently-added "unaccepted memory' feature.
To increase the feature's checking coverage. "Plug a few gaps where
RAM is exposed without checking if it is unaccepted memory".
- In the series "cleanups for lockless slab shrink" Qi Zheng has done
some maintenance work which is preparation for the lockless slab
shrinking code.
- Qi Zheng has redone the earlier (and reverted) attempt to make slab
shrinking lockless in the series "use refcount+RCU method to implement
lockless slab shrink".
- David Hildenbrand contributes some maintenance work for the rmap code
in the series "Anon rmap cleanups".
- Kefeng Wang does more folio conversions and some maintenance work in
the migration code. Series "mm: migrate: more folio conversion and
unification".
- Matthew Wilcox has fixed an issue in the buffer_head code which was
causing long stalls under some heavy memory/IO loads. Some cleanups
were added on the way. Series "Add and use bdev_getblk()".
- In the series "Use nth_page() in place of direct struct page
manipulation" Zi Yan has fixed a potential issue with the direct
manipulation of hugetlb page frames.
- In the series "mm: hugetlb: Skip initialization of gigantic tail
struct pages if freed by HVO" has improved our handling of gigantic
pages in the hugetlb vmmemmep optimizaton code. This provides
significant boot time improvements when significant amounts of gigantic
pages are in use.
- Matthew Wilcox has sent the series "Small hugetlb cleanups" - code
rationalization and folio conversions in the hugetlb code.
- Yin Fengwei has improved mlock()'s handling of large folios in the
series "support large folio for mlock"
- In the series "Expose swapcache stat for memcg v1" Liu Shixin has
added statistics for memcg v1 users which are available (and useful)
under memcg v2.
- Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
prctl so that userspace may direct the kernel to not automatically
propagate the denial to child processes. The series is named "MDWE
without inheritance".
- Kefeng Wang has provided the series "mm: convert numa balancing
functions to use a folio" which does what it says.
- In the series "mm/ksm: add fork-exec support for prctl" Stefan Roesch
makes is possible for a process to propagate KSM treatment across
exec().
- Huang Ying has enhanced memory tiering's calculation of memory
distances. This is used to permit the dax/kmem driver to use "high
bandwidth memory" in addition to Optane Data Center Persistent Memory
Modules (DCPMM). The series is named "memory tiering: calculate
abstract distance based on ACPI HMAT"
- In the series "Smart scanning mode for KSM" Stefan Roesch has
optimized KSM by teaching it to retain and use some historical
information from previous scans.
- Yosry Ahmed has fixed some inconsistencies in memcg statistics in the
series "mm: memcg: fix tracking of pending stats updates values".
- In the series "Implement IOCTL to get and optionally clear info about
PTEs" Peter Xu has added an ioctl to /proc/<pid>/pagemap which permits
us to atomically read-then-clear page softdirty state. This is mainly
used by CRIU.
- Hugh Dickins contributed the series "shmem,tmpfs: general maintenance"
- a bunch of relatively minor maintenance tweaks to this code.
- Matthew Wilcox has increased the use of the VMA lock over file-backed
page faults in the series "Handle more faults under the VMA lock". Some
rationalizations of the fault path became possible as a result.
- In the series "mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()" David Hildenbrand has implemented some cleanups
and folio conversions.
- In the series "various improvements to the GUP interface" Lorenzo
Stoakes has simplified and improved the GUP interface with an eye to
providing groundwork for future improvements.
- Andrey Konovalov has sent along the series "kasan: assorted fixes and
improvements" which does those things.
- Some page allocator maintenance work from Kemeng Shi in the series
"Two minor cleanups to break_down_buddy_pages".
- In thes series "New selftest for mm" Breno Leitao has developed
another MM self test which tickles a race we had between madvise() and
page faults.
- In the series "Add folio_end_read" Matthew Wilcox provides cleanups
and an optimization to the core pagecache code.
- Nhat Pham has added memcg accounting for hugetlb memory in the series
"hugetlb memcg accounting".
- Cleanups and rationalizations to the pagemap code from Lorenzo
Stoakes, in the series "Abstract vma_merge() and split_vma()".
- Audra Mitchell has fixed issues in the procfs page_owner code's new
timestamping feature which was causing some misbehaviours. In the
series "Fix page_owner's use of free timestamps".
- Lorenzo Stoakes has fixed the handling of new mappings of sealed files
in the series "permit write-sealed memfd read-only shared mappings".
- Mike Kravetz has optimized the hugetlb vmemmap optimization in the
series "Batch hugetlb vmemmap modification operations".
- Some buffer_head folio conversions and cleanups from Matthew Wilcox in
the series "Finish the create_empty_buffers() transition".
- As a page allocator performance optimization Huang Ying has added
automatic tuning to the allocator's per-cpu-pages feature, in the series
"mm: PCP high auto-tuning".
- Roman Gushchin has contributed the patchset "mm: improve performance
of accounted kernel memory allocations" which improves their performance
by ~30% as measured by a micro-benchmark.
- folio conversions from Kefeng Wang in the series "mm: convert page
cpupid functions to folios".
- Some kmemleak fixups in Liu Shixin's series "Some bugfix about
kmemleak".
- Qi Zheng has improved our handling of memoryless nodes by keeping them
off the allocation fallback list. This is done in the series "handle
memoryless nodes more appropriately".
- khugepaged conversions from Vishal Moola in the series "Some
khugepaged folio conversions".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZULEMwAKCRDdBJ7gKXxA
jhQHAQCYpD3g849x69DmHnHWHm/EHQLvQmRMDeYZI+nx/sCJOwEAw4AKg0Oemv9y
FgeUPAD1oasg6CP+INZvCj34waNxwAc=
=E+Y4
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Kemeng Shi has contributed some compation maintenance work in the
series 'Fixes and cleanups to compaction'
- Joel Fernandes has a patchset ('Optimize mremap during mutual
alignment within PMD') which fixes an obscure issue with mremap()'s
pagetable handling during a subsequent exec(), based upon an
implementation which Linus suggested
- More DAMON/DAMOS maintenance and feature work from SeongJae Park i
the following patch series:
mm/damon: misc fixups for documents, comments and its tracepoint
mm/damon: add a tracepoint for damos apply target regions
mm/damon: provide pseudo-moving sum based access rate
mm/damon: implement DAMOS apply intervals
mm/damon/core-test: Fix memory leaks in core-test
mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
- In the series 'Do not try to access unaccepted memory' Adrian
Hunter provides some fixups for the recently-added 'unaccepted
memory' feature. To increase the feature's checking coverage. 'Plug
a few gaps where RAM is exposed without checking if it is
unaccepted memory'
- In the series 'cleanups for lockless slab shrink' Qi Zheng has done
some maintenance work which is preparation for the lockless slab
shrinking code
- Qi Zheng has redone the earlier (and reverted) attempt to make slab
shrinking lockless in the series 'use refcount+RCU method to
implement lockless slab shrink'
- David Hildenbrand contributes some maintenance work for the rmap
code in the series 'Anon rmap cleanups'
- Kefeng Wang does more folio conversions and some maintenance work
in the migration code. Series 'mm: migrate: more folio conversion
and unification'
- Matthew Wilcox has fixed an issue in the buffer_head code which was
causing long stalls under some heavy memory/IO loads. Some cleanups
were added on the way. Series 'Add and use bdev_getblk()'
- In the series 'Use nth_page() in place of direct struct page
manipulation' Zi Yan has fixed a potential issue with the direct
manipulation of hugetlb page frames
- In the series 'mm: hugetlb: Skip initialization of gigantic tail
struct pages if freed by HVO' has improved our handling of gigantic
pages in the hugetlb vmmemmep optimizaton code. This provides
significant boot time improvements when significant amounts of
gigantic pages are in use
- Matthew Wilcox has sent the series 'Small hugetlb cleanups' - code
rationalization and folio conversions in the hugetlb code
- Yin Fengwei has improved mlock()'s handling of large folios in the
series 'support large folio for mlock'
- In the series 'Expose swapcache stat for memcg v1' Liu Shixin has
added statistics for memcg v1 users which are available (and
useful) under memcg v2
- Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
prctl so that userspace may direct the kernel to not automatically
propagate the denial to child processes. The series is named 'MDWE
without inheritance'
- Kefeng Wang has provided the series 'mm: convert numa balancing
functions to use a folio' which does what it says
- In the series 'mm/ksm: add fork-exec support for prctl' Stefan
Roesch makes is possible for a process to propagate KSM treatment
across exec()
- Huang Ying has enhanced memory tiering's calculation of memory
distances. This is used to permit the dax/kmem driver to use 'high
bandwidth memory' in addition to Optane Data Center Persistent
Memory Modules (DCPMM). The series is named 'memory tiering:
calculate abstract distance based on ACPI HMAT'
- In the series 'Smart scanning mode for KSM' Stefan Roesch has
optimized KSM by teaching it to retain and use some historical
information from previous scans
- Yosry Ahmed has fixed some inconsistencies in memcg statistics in
the series 'mm: memcg: fix tracking of pending stats updates
values'
- In the series 'Implement IOCTL to get and optionally clear info
about PTEs' Peter Xu has added an ioctl to /proc/<pid>/pagemap
which permits us to atomically read-then-clear page softdirty
state. This is mainly used by CRIU
- Hugh Dickins contributed the series 'shmem,tmpfs: general
maintenance', a bunch of relatively minor maintenance tweaks to
this code
- Matthew Wilcox has increased the use of the VMA lock over
file-backed page faults in the series 'Handle more faults under the
VMA lock'. Some rationalizations of the fault path became possible
as a result
- In the series 'mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()' David Hildenbrand has implemented some
cleanups and folio conversions
- In the series 'various improvements to the GUP interface' Lorenzo
Stoakes has simplified and improved the GUP interface with an eye
to providing groundwork for future improvements
- Andrey Konovalov has sent along the series 'kasan: assorted fixes
and improvements' which does those things
- Some page allocator maintenance work from Kemeng Shi in the series
'Two minor cleanups to break_down_buddy_pages'
- In thes series 'New selftest for mm' Breno Leitao has developed
another MM self test which tickles a race we had between madvise()
and page faults
- In the series 'Add folio_end_read' Matthew Wilcox provides cleanups
and an optimization to the core pagecache code
- Nhat Pham has added memcg accounting for hugetlb memory in the
series 'hugetlb memcg accounting'
- Cleanups and rationalizations to the pagemap code from Lorenzo
Stoakes, in the series 'Abstract vma_merge() and split_vma()'
- Audra Mitchell has fixed issues in the procfs page_owner code's new
timestamping feature which was causing some misbehaviours. In the
series 'Fix page_owner's use of free timestamps'
- Lorenzo Stoakes has fixed the handling of new mappings of sealed
files in the series 'permit write-sealed memfd read-only shared
mappings'
- Mike Kravetz has optimized the hugetlb vmemmap optimization in the
series 'Batch hugetlb vmemmap modification operations'
- Some buffer_head folio conversions and cleanups from Matthew Wilcox
in the series 'Finish the create_empty_buffers() transition'
- As a page allocator performance optimization Huang Ying has added
automatic tuning to the allocator's per-cpu-pages feature, in the
series 'mm: PCP high auto-tuning'
- Roman Gushchin has contributed the patchset 'mm: improve
performance of accounted kernel memory allocations' which improves
their performance by ~30% as measured by a micro-benchmark
- folio conversions from Kefeng Wang in the series 'mm: convert page
cpupid functions to folios'
- Some kmemleak fixups in Liu Shixin's series 'Some bugfix about
kmemleak'
- Qi Zheng has improved our handling of memoryless nodes by keeping
them off the allocation fallback list. This is done in the series
'handle memoryless nodes more appropriately'
- khugepaged conversions from Vishal Moola in the series 'Some
khugepaged folio conversions'"
[ bcachefs conflicts with the dynamically allocated shrinkers have been
resolved as per Stephen Rothwell in
https://lore.kernel.org/all/20230913093553.4290421e@canb.auug.org.au/
with help from Qi Zheng.
The clone3 test filtering conflict was half-arsed by yours truly ]
* tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (406 commits)
mm/damon/sysfs: update monitoring target regions for online input commit
mm/damon/sysfs: remove requested targets when online-commit inputs
selftests: add a sanity check for zswap
Documentation: maple_tree: fix word spelling error
mm/vmalloc: fix the unchecked dereference warning in vread_iter()
zswap: export compression failure stats
Documentation: ubsan: drop "the" from article title
mempolicy: migration attempt to match interleave nodes
mempolicy: mmap_lock is not needed while migrating folios
mempolicy: alloc_pages_mpol() for NUMA policy without vma
mm: add page_rmappable_folio() wrapper
mempolicy: remove confusing MPOL_MF_LAZY dead code
mempolicy: mpol_shared_policy_init() without pseudo-vma
mempolicy trivia: use pgoff_t in shared mempolicy tree
mempolicy trivia: slightly more consistent naming
mempolicy trivia: delete those ancient pr_debug()s
mempolicy: fix migrate_pages(2) syscall return nr_failed
kernfs: drop shared NUMA mempolicy hooks
hugetlbfs: drop shared NUMA mempolicy pretence
mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets()
...
The ia64 architecture gets its well-earned retirement as planned,
now that there is one last (mostly) working release that will
be maintained as an LTS kernel.
The architecture specific system call tables are updated for
the added map_shadow_stack() syscall and to remove references
to the long-gone sys_lookup_dcookie() syscall.
-----BEGIN PGP SIGNATURE-----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=H1vH
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull ia64 removal and asm-generic updates from Arnd Bergmann:
- The ia64 architecture gets its well-earned retirement as planned,
now that there is one last (mostly) working release that will be
maintained as an LTS kernel.
- The architecture specific system call tables are updated for the
added map_shadow_stack() syscall and to remove references to the
long-gone sys_lookup_dcookie() syscall.
* tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
hexagon: Remove unusable symbols from the ptrace.h uapi
asm-generic: Fix spelling of architecture
arch: Reserve map_shadow_stack() syscall number for all architectures
syscalls: Cleanup references to sys_lookup_dcookie()
Documentation: Drop or replace remaining mentions of IA64
lib/raid6: Drop IA64 support
Documentation: Drop IA64 from feature descriptions
kernel: Drop IA64 support from sig_fault handlers
arch: Remove Itanium (IA-64) architecture
- Add support for several Qualcomm SoC versions and other similar
changes (Christian Marangi, Dmitry Baryshkov, Luca Weiss, Neil
Armstrong, Richard Acayan, Robert Marko, Rohit Agarwal, Stephan
Gerhold and Varadarajan Narayanan).
- Clean up the tegra cpufreq driver (Sumit Gupta).
- Use of_property_read_reg() to parse "reg" in pmac32 driver (Rob
Herring).
- Add support for TI's am62p5 Soc (Bryan Brattlof).
- Make ARM_BRCMSTB_AVS_CPUFREQ depends on !ARM_SCMI_CPUFREQ (Florian
Fainelli).
- Update Kconfig to mention i.MX7 as well (Alexander Stein).
- Revise global turbo disable check in intel_pstate (Srinivas
Pandruvada).
- Carry out initialization of sg_cpu in the schedutil cpufreq governor
in one loop (Liao Chang).
- Simplify the condition for storing 'down_threshold' in the
conservative cpufreq governor (Liao Chang).
- Use fine-grained mutex in the userspace cpufreq governor (Liao
Chang).
- Move is_managed indicator in the userspace cpufreq governor into a
per-policy structure (Liao Chang).
- Rebuild sched-domains when removing cpufreq driver (Pierre Gondois).
- Fix buffer overflow detection in trans_stats() (Christian Marangi).
- Switch to dev_pm_opp_find_freq_(ceil/floor)_indexed() APIs to support
specific devices like UFS which handle multiple clocks through OPP
(Operating Performance Point) framework (Manivannan Sadhasivam).
- Add perf support to the Rockchip DFI (DDR Monitor Module) devfreq-
event driver:
* Generalize rockchip-dfi.c to support new RK3568/RK3588 using
different DDR type (Sascha Hauer).
* Convert DT binding document format to yaml (Sascha Hauer).
* Add perf support for DFI (a unit suitable for measuring DDR
utilization) to rockchip-dfi.c to extend DFI usage (Sascha Hauer).
- Add locking to the OPP handling code in the Mediatek CCI devfreq
driver, because the voltage of shared OPP might be changed by
multiple drivers (Mark Tseng, Dan Carpenter).
- Use device_get_match_data() in the Samsung Exynos PPMU devfreq-event
driver (Rob Herring).
- Extend support for the opp-level beyond required-opps (Ulf Hansson).
- Add dev_pm_opp_find_level_floor() (Krishna chaitanya chundru).
- dt-bindings: Allow opp-peak-kBpsfor kryo CPUs, support Qualcomm Krait
SoCs and document named opp-microvolt property (Bjorn Andersson,
Dmitry Baryshkov and Christian Marangi).
- Fix -Wunsequenced warning _of_add_opp_table_v1() (Nathan Chancellor).
- General cleanup of OPP code (Viresh Kumar).
- Use __get_safe_page() rather than touching the list in hibernation
snapshot code (Brian Geffon).
- Fix symbol export for _SIMPLE_ variants of _PM_OPS() (Raag Jadav).
- Clean up sync_read handling in snapshot_write_next() (Brian Geffon).
- Fix kerneldoc comments for swsusp_check() and swsusp_close() to
better match code (Christoph Hellwig).
- Downgrade BIOS locked limits pr_warn() in the Intel RAPL power
capping driver to pr_debug() (Ville Syrjälä).
- Change the minimum python version for the intel_pstate_tracer utility
from 2.7 to 3.6 (Doug Smythies).
-----BEGIN PGP SIGNATURE-----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=h8my
-----END PGP SIGNATURE-----
Merge tag 'pm-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add new hardware support (new Qualcomm SoC versions in cpufreq,
RK3568/RK3588 in devfreq), extend the OPP (operating performance
points) framework, improve cpufreq governors, fix issues and clean up
code (most of the changes are in cpufreq and devfreq).
Specifics:
- Add support for several Qualcomm SoC versions and other similar
changes (Christian Marangi, Dmitry Baryshkov, Luca Weiss, Neil
Armstrong, Richard Acayan, Robert Marko, Rohit Agarwal, Stephan
Gerhold and Varadarajan Narayanan)
- Clean up the tegra cpufreq driver (Sumit Gupta)
- Use of_property_read_reg() to parse "reg" in pmac32 driver (Rob
Herring)
- Add support for TI's am62p5 Soc (Bryan Brattlof)
- Make ARM_BRCMSTB_AVS_CPUFREQ depends on !ARM_SCMI_CPUFREQ (Florian
Fainelli)
- Update Kconfig to mention i.MX7 as well (Alexander Stein)
- Revise global turbo disable check in intel_pstate (Srinivas
Pandruvada)
- Carry out initialization of sg_cpu in the schedutil cpufreq
governor in one loop (Liao Chang)
- Simplify the condition for storing 'down_threshold' in the
conservative cpufreq governor (Liao Chang)
- Use fine-grained mutex in the userspace cpufreq governor (Liao
Chang)
- Move is_managed indicator in the userspace cpufreq governor into a
per-policy structure (Liao Chang)
- Rebuild sched-domains when removing cpufreq driver (Pierre Gondois)
- Fix buffer overflow detection in trans_stats() (Christian Marangi)
- Switch to dev_pm_opp_find_freq_(ceil/floor)_indexed() APIs to
support specific devices like UFS which handle multiple clocks
through OPP (Operating Performance Point) framework (Manivannan
Sadhasivam)
- Add perf support to the Rockchip DFI (DDR Monitor Module) devfreq-
event driver:
* Generalize rockchip-dfi.c to support new RK3568/RK3588 using
different DDR type (Sascha Hauer).
* Convert DT binding document format to yaml (Sascha Hauer).
* Add perf support for DFI (a unit suitable for measuring DDR
utilization) to rockchip-dfi.c to extend DFI usage (Sascha
Hauer)
- Add locking to the OPP handling code in the Mediatek CCI devfreq
driver, because the voltage of shared OPP might be changed by
multiple drivers (Mark Tseng, Dan Carpenter)
- Use device_get_match_data() in the Samsung Exynos PPMU
devfreq-event driver (Rob Herring)
- Extend support for the opp-level beyond required-opps (Ulf Hansson)
- Add dev_pm_opp_find_level_floor() (Krishna chaitanya chundru)
- dt-bindings: Allow opp-peak-kBpsfor kryo CPUs, support Qualcomm
Krait SoCs and document named opp-microvolt property (Bjorn
Andersson, Dmitry Baryshkov and Christian Marangi)
- Fix -Wunsequenced warning _of_add_opp_table_v1() (Nathan
Chancellor)
- General cleanup of OPP code (Viresh Kumar)
- Use __get_safe_page() rather than touching the list in hibernation
snapshot code (Brian Geffon)
- Fix symbol export for _SIMPLE_ variants of _PM_OPS() (Raag Jadav)
- Clean up sync_read handling in snapshot_write_next() (Brian Geffon)
- Fix kerneldoc comments for swsusp_check() and swsusp_close() to
better match code (Christoph Hellwig)
- Downgrade BIOS locked limits pr_warn() in the Intel RAPL power
capping driver to pr_debug() (Ville Syrjälä)
- Change the minimum python version for the intel_pstate_tracer
utility from 2.7 to 3.6 (Doug Smythies)"
* tag 'pm-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (82 commits)
dt-bindings: cpufreq: qcom-hw: document SM8650 CPUFREQ Hardware
cpufreq: arm: Kconfig: Add i.MX7 to supported SoC for ARM_IMX_CPUFREQ_DT
cpufreq: qcom-nvmem: add support for IPQ8064
cpufreq: qcom-nvmem: also accept operating-points-v2-krait-cpu
cpufreq: qcom-nvmem: drop pvs_ver for format a fuses
dt-bindings: cpufreq: qcom-cpufreq-nvmem: Document krait-cpu
cpufreq: qcom-nvmem: add support for IPQ6018
dt-bindings: cpufreq: qcom-cpufreq-nvmem: document IPQ6018
cpufreq: qcom-nvmem: Add MSM8909
cpufreq: qcom-nvmem: Simplify driver data allocation
powercap: intel_rapl: Downgrade BIOS locked limits pr_warn() to pr_debug()
cpufreq: stats: Fix buffer overflow detection in trans_stats()
dt-bindings: devfreq: event: rockchip,dfi: Add rk3588 support
dt-bindings: devfreq: event: rockchip,dfi: Add rk3568 support
dt-bindings: devfreq: event: convert Rockchip DFI binding to yaml
PM / devfreq: rockchip-dfi: add support for RK3588
PM / devfreq: rockchip-dfi: account for multiple DDRMON_CTRL registers
PM / devfreq: rockchip-dfi: make register stride SoC specific
PM / devfreq: rockchip-dfi: Add perf support
PM / devfreq: rockchip-dfi: give variable a better name
...
- Fair scheduler (SCHED_OTHER) improvements:
- Remove the old and now unused SIS_PROP code & option
- Scan cluster before LLC in the wake-up path
- Use candidate prev/recent_used CPU if scanning failed for cluster wakeup
- NUMA scheduling improvements:
- Improve the VMA access-PID code to better skip/scan VMAs
- Extend tracing to cover VMA-skipping decisions
- Improve/fix the recently introduced sched_numa_find_nth_cpu() code
- Generalize numa_map_to_online_node()
- Energy scheduling improvements:
- Remove the EM_MAX_COMPLEXITY limit
- Add tracepoints to track energy computation
- Make the behavior of the 'sched_energy_aware' sysctl more consistent
- Consolidate and clean up access to a CPU's max compute capacity
- Fix uclamp code corner cases
- RT scheduling improvements:
- Drive dl_rq->overloaded with dl_rq->pushable_dl_tasks updates
- Drive the ->rto_mask with rt_rq->pushable_tasks updates
- Scheduler scalability improvements:
- Rate-limit updates to tg->load_avg
- On x86 disable IBRS when CPU is offline to improve single-threaded performance
- Micro-optimize in_task() and in_interrupt()
- Micro-optimize the PSI code
- Avoid updating PSI triggers and ->rtpoll_total when there are no state changes
- Core scheduler infrastructure improvements:
- Use saved_state to reduce some spurious freezer wakeups
- Bring in a handful of fast-headers improvements to scheduler headers
- Make the scheduler UAPI headers more widely usable by user-space
- Simplify the control flow of scheduler syscalls by using lock guards
- Fix sched_setaffinity() vs. CPU hotplug race
- Scheduler debuggability improvements:
- Disallow writing invalid values to sched_rt_period_us
- Fix a race in the rq-clock debugging code triggering warnings
- Fix a warning in the bandwidth distribution code
- Micro-optimize in_atomic_preempt_off() checks
- Enforce that the tasklist_lock is held in for_each_thread()
- Print the TGID in sched_show_task()
- Remove the /proc/sys/kernel/sched_child_runs_first sysctl
- Misc cleanups & fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=GDqb
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Fair scheduler (SCHED_OTHER) improvements:
- Remove the old and now unused SIS_PROP code & option
- Scan cluster before LLC in the wake-up path
- Use candidate prev/recent_used CPU if scanning failed for cluster
wakeup
NUMA scheduling improvements:
- Improve the VMA access-PID code to better skip/scan VMAs
- Extend tracing to cover VMA-skipping decisions
- Improve/fix the recently introduced sched_numa_find_nth_cpu() code
- Generalize numa_map_to_online_node()
Energy scheduling improvements:
- Remove the EM_MAX_COMPLEXITY limit
- Add tracepoints to track energy computation
- Make the behavior of the 'sched_energy_aware' sysctl more
consistent
- Consolidate and clean up access to a CPU's max compute capacity
- Fix uclamp code corner cases
RT scheduling improvements:
- Drive dl_rq->overloaded with dl_rq->pushable_dl_tasks updates
- Drive the ->rto_mask with rt_rq->pushable_tasks updates
Scheduler scalability improvements:
- Rate-limit updates to tg->load_avg
- On x86 disable IBRS when CPU is offline to improve single-threaded
performance
- Micro-optimize in_task() and in_interrupt()
- Micro-optimize the PSI code
- Avoid updating PSI triggers and ->rtpoll_total when there are no
state changes
Core scheduler infrastructure improvements:
- Use saved_state to reduce some spurious freezer wakeups
- Bring in a handful of fast-headers improvements to scheduler
headers
- Make the scheduler UAPI headers more widely usable by user-space
- Simplify the control flow of scheduler syscalls by using lock
guards
- Fix sched_setaffinity() vs. CPU hotplug race
Scheduler debuggability improvements:
- Disallow writing invalid values to sched_rt_period_us
- Fix a race in the rq-clock debugging code triggering warnings
- Fix a warning in the bandwidth distribution code
- Micro-optimize in_atomic_preempt_off() checks
- Enforce that the tasklist_lock is held in for_each_thread()
- Print the TGID in sched_show_task()
- Remove the /proc/sys/kernel/sched_child_runs_first sysctl
... and misc cleanups & fixes"
* tag 'sched-core-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (82 commits)
sched/fair: Remove SIS_PROP
sched/fair: Use candidate prev/recent_used CPU if scanning failed for cluster wakeup
sched/fair: Scan cluster before scanning LLC in wake-up path
sched: Add cpus_share_resources API
sched/core: Fix RQCF_ACT_SKIP leak
sched/fair: Remove unused 'curr' argument from pick_next_entity()
sched/nohz: Update comments about NEWILB_KICK
sched/fair: Remove duplicate #include
sched/psi: Update poll => rtpoll in relevant comments
sched: Make PELT acronym definition searchable
sched: Fix stop_one_cpu_nowait() vs hotplug
sched/psi: Bail out early from irq time accounting
sched/topology: Rename 'DIE' domain to 'PKG'
sched/psi: Delete the 'update_total' function parameter from update_triggers()
sched/psi: Avoid updating PSI triggers and ->rtpoll_total when there are no state changes
sched/headers: Remove comment referring to rq::cpu_load, since this has been removed
sched/numa: Complete scanning of inactive VMAs when there is no alternative
sched/numa: Complete scanning of partial VMAs regardless of PID activity
sched/numa: Move up the access pid reset logic
sched/numa: Trace decisions related to skipping VMAs
...
- Futex improvements:
- Add the 'futex2' syscall ABI, which is an attempt to get away from the
multiplex syscall and adds a little room for extentions, while lifting
some limitations.
- Fix futex PI recursive rt_mutex waiter state bug
- Fix inter-process shared futexes on no-MMU systems
- Use folios instead of pages
- Micro-optimizations of locking primitives:
- Improve arch_spin_value_unlocked() on asm-generic ticket spinlock
architectures, to improve lockref code generation.
- Improve the x86-32 lockref_get_not_zero() main loop by adding
build-time CMPXCHG8B support detection for the relevant lockref code,
and by better interfacing the CMPXCHG8B assembly code with the compiler.
- Introduce arch_sync_try_cmpxchg() on x86 to improve sync_try_cmpxchg()
code generation. Convert some sync_cmpxchg() users to sync_try_cmpxchg().
- Micro-optimize rcuref_put_slowpath()
- Locking debuggability improvements:
- Improve CONFIG_DEBUG_RT_MUTEXES=y to have a fast-path as well
- Enforce atomicity of sched_submit_work(), which is de-facto atomic but
was un-enforced previously.
- Extend <linux/cleanup.h>'s no_free_ptr() with __must_check semantics
- Fix ww_mutex self-tests
- Clean up const-propagation in <linux/seqlock.h> and simplify
the API-instantiation macros a bit.
- RT locking improvements:
- Provide the rt_mutex_*_schedule() primitives/helpers and use them
in the rtmutex code to avoid recursion vs. rtlock on the PI state.
- Add nested blocking lockdep asserts to rt_mutex_lock(), rtlock_lock()
and rwbase_read_lock().
- Plus misc fixes & cleanups
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=36Ff
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Info Molnar:
"Futex improvements:
- Add the 'futex2' syscall ABI, which is an attempt to get away from
the multiplex syscall and adds a little room for extentions, while
lifting some limitations.
- Fix futex PI recursive rt_mutex waiter state bug
- Fix inter-process shared futexes on no-MMU systems
- Use folios instead of pages
Micro-optimizations of locking primitives:
- Improve arch_spin_value_unlocked() on asm-generic ticket spinlock
architectures, to improve lockref code generation
- Improve the x86-32 lockref_get_not_zero() main loop by adding
build-time CMPXCHG8B support detection for the relevant lockref
code, and by better interfacing the CMPXCHG8B assembly code with
the compiler
- Introduce arch_sync_try_cmpxchg() on x86 to improve
sync_try_cmpxchg() code generation. Convert some sync_cmpxchg()
users to sync_try_cmpxchg().
- Micro-optimize rcuref_put_slowpath()
Locking debuggability improvements:
- Improve CONFIG_DEBUG_RT_MUTEXES=y to have a fast-path as well
- Enforce atomicity of sched_submit_work(), which is de-facto atomic
but was un-enforced previously.
- Extend <linux/cleanup.h>'s no_free_ptr() with __must_check
semantics
- Fix ww_mutex self-tests
- Clean up const-propagation in <linux/seqlock.h> and simplify the
API-instantiation macros a bit
RT locking improvements:
- Provide the rt_mutex_*_schedule() primitives/helpers and use them
in the rtmutex code to avoid recursion vs. rtlock on the PI state.
- Add nested blocking lockdep asserts to rt_mutex_lock(),
rtlock_lock() and rwbase_read_lock()
.. plus misc fixes & cleanups"
* tag 'locking-core-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
futex: Don't include process MM in futex key on no-MMU
locking/seqlock: Fix grammar in comment
alpha: Fix up new futex syscall numbers
locking/seqlock: Propagate 'const' pointers within read-only methods, remove forced type casts
locking/lockdep: Fix string sizing bug that triggers a format-truncation compiler-warning
locking/seqlock: Change __seqprop() to return the function pointer
locking/seqlock: Simplify SEQCOUNT_LOCKNAME()
locking/atomics: Use atomic_try_cmpxchg_release() to micro-optimize rcuref_put_slowpath()
locking/atomic, xen: Use sync_try_cmpxchg() instead of sync_cmpxchg()
locking/atomic/x86: Introduce arch_sync_try_cmpxchg()
locking/atomic: Add generic support for sync_try_cmpxchg() and its fallback
locking/seqlock: Fix typo in comment
futex/requeue: Remove unnecessary ‘NULL’ initialization from futex_proxy_trylock_atomic()
locking/local, arch: Rewrite local_add_unless() as a static inline function
locking/debug: Fix debugfs API return value checks to use IS_ERR()
locking/ww_mutex/test: Make sure we bail out instead of livelock
locking/ww_mutex/test: Fix potential workqueue corruption
locking/ww_mutex/test: Use prng instead of rng to avoid hangs at bootup
futex: Add sys_futex_requeue()
futex: Add flags2 argument to futex_requeue()
...
Merge cpufreq updates for 6.7-rc1:
- Add support for several Qualcomm SoC versions and other similar
changes (Christian Marangi, Dmitry Baryshkov, Luca Weiss, Neil
Armstrong, Richard Acayan, Robert Marko, Rohit Agarwal, Stephan
Gerhold and Varadarajan Narayanan).
- Clean up the tegra cpufreq driver (Sumit Gupta).
- Use of_property_read_reg() to parse "reg" in pmac32 driver (Rob
Herring).
- Add support for TI's am62p5 Soc (Bryan Brattlof).
- Make ARM_BRCMSTB_AVS_CPUFREQ depends on !ARM_SCMI_CPUFREQ (Florian
Fainelli).
- Update Kconfig to mention i.MX7 as well (Alexander Stein).
- Revise global turbo disable check in intel_pstate (Srinivas
Pandruvada).
- Carry out initialization of sg_cpu in the schedutil cpufreq governor
in one loop (Liao Chang).
- Simplify the condition for storing 'down_threshold' in the
conservative cpufreq governor (Liao Chang).
- Use fine-grained mutex in the userspace cpufreq governor (Liao
Chang).
- Move is_managed indicator in the userspace cpufreq governor into a
per-policy structure (Liao Chang).
- Rebuild sched-domains when removing cpufreq driver (Pierre Gondois).
- Fix buffer overflow detection in trans_stats() (Christian Marangi).
* pm-cpufreq: (32 commits)
dt-bindings: cpufreq: qcom-hw: document SM8650 CPUFREQ Hardware
cpufreq: arm: Kconfig: Add i.MX7 to supported SoC for ARM_IMX_CPUFREQ_DT
cpufreq: qcom-nvmem: add support for IPQ8064
cpufreq: qcom-nvmem: also accept operating-points-v2-krait-cpu
cpufreq: qcom-nvmem: drop pvs_ver for format a fuses
dt-bindings: cpufreq: qcom-cpufreq-nvmem: Document krait-cpu
cpufreq: qcom-nvmem: add support for IPQ6018
dt-bindings: cpufreq: qcom-cpufreq-nvmem: document IPQ6018
cpufreq: qcom-nvmem: Add MSM8909
cpufreq: qcom-nvmem: Simplify driver data allocation
cpufreq: stats: Fix buffer overflow detection in trans_stats()
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SDX75 compatible
cpufreq: ARM_BRCMSTB_AVS_CPUFREQ cannot be used with ARM_SCMI_CPUFREQ
cpufreq: ti-cpufreq: Add opp support for am62p5 SoCs
cpufreq: dt-platdev: add am62p5 to blocklist
cpufreq: tegra194: remove redundant AND with cpu_online_mask
cpufreq: tegra194: use refclk delta based loop instead of udelay
cpufreq: tegra194: save CPU data to avoid repeated SMP calls
cpufreq: Rebuild sched-domains when removing cpufreq driver
cpufreq: userspace: Move is_managed indicator into per-policy structure
...
Convert to use folio_xchg_last_cpupid() in should_numa_migrate_memory().
Link: https://lkml.kernel.org/r/20231018140806.2783514-14-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert to use folio_xchg_access_time() in numa_hint_fault_latency().
Link: https://lkml.kernel.org/r/20231018140806.2783514-9-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Chen Yu reports a hackbench regression of cluster wakeup when
hackbench threads equal to the CPU number [1]. Analysis shows
it's because we wake up more on the target CPU even if the
prev_cpu is a good wakeup candidate and leads to the decrease
of the CPU utilization.
Generally if the task's prev_cpu is idle we'll wake up the task
on it without scanning. On cluster machines we'll try to wake up
the task in the same cluster of the target for better cache
affinity, so if the prev_cpu is idle but not sharing the same
cluster with the target we'll still try to find an idle CPU within
the cluster. This will improve the performance at low loads on
cluster machines. But in the issue above, if the prev_cpu is idle
but not in the cluster with the target CPU, we'll try to scan an
idle one in the cluster. But since the system is busy, we're
likely to fail the scanning and use target instead, even if
the prev_cpu is idle. Then leads to the regression.
This patch solves this in 2 steps:
o record the prev_cpu/recent_used_cpu if they're good wakeup
candidates but not sharing the cluster with the target.
o on scanning failure use the prev_cpu/recent_used_cpu if
they're recorded as idle
[1] https://lore.kernel.org/all/ZGzDLuVaHR1PAYDt@chenyu5-mobl1/
Closes: https://lore.kernel.org/all/ZGsLy83wPIpamy6x@chenyu5-mobl1/
Reported-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Tested-and-reviewed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20231019033323.54147-4-yangyicong@huawei.com
For platforms having clusters like Kunpeng920, CPUs within the same cluster
have lower latency when synchronizing and accessing shared resources like
cache. Thus, this patch tries to find an idle cpu within the cluster of the
target CPU before scanning the whole LLC to gain lower latency. This
will be implemented in 2 steps in select_idle_sibling():
1. When the prev_cpu/recent_used_cpu are good wakeup candidates, use them
if they're sharing cluster with the target CPU. Otherwise trying to
scan for an idle CPU in the target's cluster.
2. Scanning the cluster prior to the LLC of the target CPU for an
idle CPU to wakeup.
Testing has been done on Kunpeng920 by pinning tasks to one numa and two
numa. On Kunpeng920, Each numa has 8 clusters and each cluster has 4 CPUs.
With this patch, We noticed enhancement on tbench and netperf within one
numa or cross two numa on top of tip-sched-core commit
9b46f1abc6d4 ("sched/debug: Print 'tgid' in sched_show_task()")
tbench results (node 0):
baseline patched
1: 327.2833 372.4623 ( 13.80%)
4: 1320.5933 1479.8833 ( 12.06%)
8: 2638.4867 2921.5267 ( 10.73%)
16: 5282.7133 5891.5633 ( 11.53%)
32: 9810.6733 9877.3400 ( 0.68%)
64: 7408.9367 7447.9900 ( 0.53%)
128: 6203.2600 6191.6500 ( -0.19%)
tbench results (node 0-1):
baseline patched
1: 332.0433 372.7223 ( 12.25%)
4: 1325.4667 1477.6733 ( 11.48%)
8: 2622.9433 2897.9967 ( 10.49%)
16: 5218.6100 5878.2967 ( 12.64%)
32: 10211.7000 11494.4000 ( 12.56%)
64: 13313.7333 16740.0333 ( 25.74%)
128: 13959.1000 14533.9000 ( 4.12%)
netperf results TCP_RR (node 0):
baseline patched
1: 76546.5033 90649.9867 ( 18.42%)
4: 77292.4450 90932.7175 ( 17.65%)
8: 77367.7254 90882.3467 ( 17.47%)
16: 78519.9048 90938.8344 ( 15.82%)
32: 72169.5035 72851.6730 ( 0.95%)
64: 25911.2457 25882.2315 ( -0.11%)
128: 10752.6572 10768.6038 ( 0.15%)
netperf results TCP_RR (node 0-1):
baseline patched
1: 76857.6667 90892.2767 ( 18.26%)
4: 78236.6475 90767.3017 ( 16.02%)
8: 77929.6096 90684.1633 ( 16.37%)
16: 77438.5873 90502.5787 ( 16.87%)
32: 74205.6635 88301.5612 ( 19.00%)
64: 69827.8535 71787.6706 ( 2.81%)
128: 25281.4366 25771.3023 ( 1.94%)
netperf results UDP_RR (node 0):
baseline patched
1: 96869.8400 110800.8467 ( 14.38%)
4: 97744.9750 109680.5425 ( 12.21%)
8: 98783.9863 110409.9637 ( 11.77%)
16: 99575.0235 110636.2435 ( 11.11%)
32: 95044.7250 97622.8887 ( 2.71%)
64: 32925.2146 32644.4991 ( -0.85%)
128: 12859.2343 12824.0051 ( -0.27%)
netperf results UDP_RR (node 0-1):
baseline patched
1: 97202.4733 110190.1200 ( 13.36%)
4: 95954.0558 106245.7258 ( 10.73%)
8: 96277.1958 105206.5304 ( 9.27%)
16: 97692.7810 107927.2125 ( 10.48%)
32: 79999.6702 103550.2999 ( 29.44%)
64: 80592.7413 87284.0856 ( 8.30%)
128: 27701.5770 29914.5820 ( 7.99%)
Note neither Kunpeng920 nor x86 Jacobsville supports SMT, so the SMT branch
in the code has not been tested but it supposed to work.
Chen Yu also noticed this will improve the performance of tbench and
netperf on a 24 CPUs Jacobsville machine, there are 4 CPUs in one
cluster sharing L2 Cache.
[https://lore.kernel.org/lkml/Ytfjs+m1kUs0ScSn@worktop.programming.kicks-ass.net]
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-and-reviewed-by: Chen Yu <yu.c.chen@intel.com>
Tested-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lkml.kernel.org/r/20231019033323.54147-3-yangyicong@huawei.com
Add cpus_share_resources() API. This is the preparation for the
optimization of select_idle_cpu() on platforms with cluster scheduler
level.
On a machine with clusters cpus_share_resources() will test whether
two cpus are within the same cluster. On a non-cluster machine it
will behaves the same as cpus_share_cache(). So we use "resources"
here for cache resources.
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-and-reviewed-by: Chen Yu <yu.c.chen@intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lkml.kernel.org/r/20231019033323.54147-2-yangyicong@huawei.com
Igor Raits and Bagas Sanjaya report a RQCF_ACT_SKIP leak warning.
This warning may be triggered in the following situations:
CPU0 CPU1
__schedule()
*rq->clock_update_flags <<= 1;* unregister_fair_sched_group()
pick_next_task_fair+0x4a/0x410 destroy_cfs_bandwidth()
newidle_balance+0x115/0x3e0 for_each_possible_cpu(i) *i=0*
rq_unpin_lock(this_rq, rf) __cfsb_csd_unthrottle()
raw_spin_rq_unlock(this_rq)
rq_lock(*CPU0_rq*, &rf)
rq_clock_start_loop_update()
rq->clock_update_flags & RQCF_ACT_SKIP <--
raw_spin_rq_lock(this_rq)
The purpose of RQCF_ACT_SKIP is to skip the update rq clock,
but the update is very early in __schedule(), but we clear
RQCF_*_SKIP very late, causing it to span that gap above
and triggering this warning.
In __schedule() we can clear the RQCF_*_SKIP flag immediately
after update_rq_clock() to avoid this RQCF_ACT_SKIP leak warning.
And set rq->clock_update_flags to RQCF_UPDATED to avoid
rq->clock_update_flags < RQCF_ACT_SKIP warning that may be triggered later.
Fixes: ebb83d84e4 ("sched/core: Avoid multiple calling update_rq_clock() in __cfsb_csd_unthrottle()")
Closes: https://lore.kernel.org/all/20230913082424.73252-1-jiahao.os@bytedance.com
Reported-by: Igor Raits <igor.raits@gmail.com>
Reported-by: Bagas Sanjaya <bagasdotme@gmail.com>
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Hao Jia <jiahao.os@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/a5dd536d-041a-2ce9-f4b7-64d8d85c86dc@gmail.com
The 'curr' argument of pick_next_entity() has become unused after
the EEVDF changes.
[ mingo: Updated the changelog. ]
Signed-off-by: Yiwei Lin <s921975628@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20231020055617.42064-1-s921975628@gmail.com
How ILB is triggered without IPIs is cryptic. Out of mercy for future
code readers, document it in code comments.
The comments are derived from a discussion with Vincent in a past
review.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20231020014031.919742-2-joel@joelfernandes.org
__read_mostly predates __ro_after_init. Many variables which are marked
__read_mostly should have been __ro_after_init from day 1.
Also, mark some stuff as "const" and "__init" while I'm at it.
[akpm@linux-foundation.org: revert sysctl_nr_open_min, sysctl_nr_open_max changes due to arm warning]
[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/4f6bb9c0-abba-4ee4-a7aa-89265e886817@p183
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There are no users of wait bookmarks left, so simplify the wait
code by removing them.
Link: https://lkml.kernel.org/r/20231010035829.544242-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Benjamin Segall <bsegall@google.com>
Cc: Bin Lai <sclaibin@gmail.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The cpupid (or access time) is stored in the head page for THP, so it is
safely to make should_numa_migrate_memory() and numa_hint_fault_latency()
to take a folio. This is in preparation for large folio numa balancing.
Link: https://lkml.kernel.org/r/20230921074417.24004-7-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The PSI trigger code is now making a distinction between privileged and
unprivileged triggers, after the following commit:
65457b74aa ("sched/psi: Rename existing poll members in preparation")
But some comments have not been modified along with the code, so they
need to be updated.
This will help readers better understand the code.
Signed-off-by: Fan Yu <fan.yu9@zte.com.cn>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Peter Ziljstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/202310161920399921184@zte.com.cn
The PELT acronym definition can be found right at the top of
kernel/sched/pelt.c (of course), but it cannot be found through use of
grep -r PELT kernel/sched/
Add the acronym "(PELT)" after "Per Entity Load Tracking" at the top of
the source file.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231012125824.1260774-1-mathieu.desnoyers@efficios.com
Kuyo reported sporadic failures on a sched_setaffinity() vs CPU
hotplug stress-test -- notably affine_move_task() remains stuck in
wait_for_completion(), leading to a hung-task detector warning.
Specifically, it was reported that stop_one_cpu_nowait(.fn =
migration_cpu_stop) returns false -- this stopper is responsible for
the matching complete().
The race scenario is:
CPU0 CPU1
// doing _cpu_down()
__set_cpus_allowed_ptr()
task_rq_lock();
takedown_cpu()
stop_machine_cpuslocked(take_cpu_down..)
<PREEMPT: cpu_stopper_thread()
MULTI_STOP_PREPARE
...
__set_cpus_allowed_ptr_locked()
affine_move_task()
task_rq_unlock();
<PREEMPT: cpu_stopper_thread()\>
ack_state()
MULTI_STOP_RUN
take_cpu_down()
__cpu_disable();
stop_machine_park();
stopper->enabled = false;
/>
/>
stop_one_cpu_nowait(.fn = migration_cpu_stop);
if (stopper->enabled) // false!!!
That is, by doing stop_one_cpu_nowait() after dropping rq-lock, the
stopper thread gets a chance to preempt and allows the cpu-down for
the target CPU to complete.
OTOH, since stop_one_cpu_nowait() / cpu_stop_queue_work() needs to
issue a wakeup, it must not be ran under the scheduler locks.
Solve this apparent contradiction by keeping preemption disabled over
the unlock + queue_stopper combination:
preempt_disable();
task_rq_unlock(...);
if (!stop_pending)
stop_one_cpu_nowait(...)
preempt_enable();
This respects the lock ordering contraints while still avoiding the
above race. That is, if we find the CPU is online under rq-lock, the
targeted stop_one_cpu_nowait() must succeed.
Apply this pattern to all similar stop_one_cpu_nowait() invocations.
Fixes: 6d337eab04 ("sched: Fix migrate_disable() vs set_cpus_allowed_ptr()")
Reported-by: "Kuyo Chang (張建文)" <Kuyo.Chang@mediatek.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: "Kuyo Chang (張建文)" <Kuyo.Chang@mediatek.com>
Link: https://lkml.kernel.org/r/20231010200442.GA16515@noisy.programming.kicks-ass.net
We could bail out early when psi was disabled.
Signed-off-by: Haifeng Xu <haifeng.xu@shopee.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Link: https://lore.kernel.org/r/20230926115722.467833-1-haifeng.xu@shopee.com
While reworking the x86 topology code Thomas tripped over creating a 'DIE' domain
for the package mask. :-)
Since these names are CONFIG_SCHED_DEBUG=y only, rename them to make the
name less ambiguous.
[ Shrikanth Hegde: rename on s390 as well. ]
[ Valentin Schneider: also rename it in the comments. ]
[ mingo: port to recent kernels & find all remaining occurances. ]
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Valentin Schneider <vschneid@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230712141056.GI3100107@hirez.programming.kicks-ass.net
The 'update_total' parameter of update_triggers() is always true after the
previous commit:
80cc1d1d5e ("sched/psi: Avoid updating PSI triggers and ->rtpoll_total when there are no state changes")
If the 'changed_states & group->rtpoll_states' condition is true,
'new_stall' in update_triggers() will be true, and then 'update_total'
should also be true.
So update_total is redundant - remove it.
[ mingo: Changelog updates ]
Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Peter Ziljstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/202310101645437859599@zte.com.cn
When psimon wakes up and there are no state changes for ->rtpoll_states,
it's unnecessary to update triggers and ->rtpoll_total because the pressures
being monitored by the user have not changed.
This will help to slightly reduce unnecessary computations of PSI.
[ mingo: Changelog updates ]
Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Peter Ziljstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/202310101641075436843@zte.com.cn
There is a comment that refers to cpu_load, however, this cpu_load was
removed with:
55627e3cd2 ("sched/core: Remove rq->cpu_load[]")
... back in 2019. The comment does not make sense with respect to this
removed array, so remove the comment.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20231010155744.1381065-1-colin.i.king@gmail.com
VMAs are skipped if there is no recent fault activity but this represents
a chicken-and-egg problem as there may be no fault activity if the PTEs
are never updated to trap NUMA hints. There is an indirect reliance on
scanning to be forced early in the lifetime of a task but this may fail
to detect changes in phase behaviour. Force inactive VMAs to be scanned
when all other eligible VMAs have been updated within the same scan
sequence.
Test results in general look good with some changes in performance, both
negative and positive, depending on whether the additional scanning and
faulting was beneficial or not to the workload. The autonuma benchmark
workload NUMA01_THREADLOCAL was picked for closer examination. The workload
creates two processes with numerous threads and thread-local storage that
is zero-filled in a loop. It exercises the corner case where unrelated
threads may skip VMAs that are thread-local to another thread and still
has some VMAs that inactive while the workload executes.
The VMA skipping activity frequency with and without the patch:
6.6.0-rc2-sched-numabtrace-v1
=============================
649 reason=scan_delay
9,094 reason=unsuitable
48,915 reason=shared_ro
143,919 reason=inaccessible
193,050 reason=pid_inactive
6.6.0-rc2-sched-numabselective-v1
=============================
146 reason=seq_completed
622 reason=ignore_pid_inactive
624 reason=scan_delay
6,570 reason=unsuitable
16,101 reason=shared_ro
27,608 reason=inaccessible
41,939 reason=pid_inactive
Note that with the patch applied, the PID activity is ignored
(ignore_pid_inactive) to ensure a VMA with some activity is completely
scanned. In addition, a small number of VMAs are scanned when no other
eligible VMA is available during a single scan window (seq_completed).
The number of times a VMA is skipped due to no PID activity from the
scanning task (pid_inactive) drops dramatically. It is expected that
this will increase the number of PTEs updated for NUMA hinting faults
as well as hinting faults but these represent PTEs that would otherwise
have been missed. The tradeoff is scan+fault overhead versus improving
locality due to migration.
On a 2-socket Cascade Lake test machine, the time to complete the
workload is as follows;
6.6.0-rc2 6.6.0-rc2
sched-numabtrace-v1 sched-numabselective-v1
Min elsp-NUMA01_THREADLOCAL 174.22 ( 0.00%) 117.64 ( 32.48%)
Amean elsp-NUMA01_THREADLOCAL 175.68 ( 0.00%) 123.34 * 29.79%*
Stddev elsp-NUMA01_THREADLOCAL 1.20 ( 0.00%) 4.06 (-238.20%)
CoeffVar elsp-NUMA01_THREADLOCAL 0.68 ( 0.00%) 3.29 (-381.70%)
Max elsp-NUMA01_THREADLOCAL 177.18 ( 0.00%) 128.03 ( 27.74%)
The time to complete the workload is reduced by almost 30%:
6.6.0-rc2 6.6.0-rc2
sched-numabtrace-v1 sched-numabselective-v1 /
Duration User 91201.80 63506.64
Duration System 2015.53 1819.78
Duration Elapsed 1234.77 868.37
In this specific case, system CPU time was not increased but it's not
universally true.
From vmstat, the NUMA scanning and fault activity is as follows;
6.6.0-rc2 6.6.0-rc2
sched-numabtrace-v1 sched-numabselective-v1
Ops NUMA base-page range updates 64272.00 26374386.00
Ops NUMA PTE updates 36624.00 55538.00
Ops NUMA PMD updates 54.00 51404.00
Ops NUMA hint faults 15504.00 75786.00
Ops NUMA hint local faults % 14860.00 56763.00
Ops NUMA hint local percent 95.85 74.90
Ops NUMA pages migrated 1629.00 6469222.00
Both the number of PTE updates and hint faults is dramatically
increased. While this is superficially unfortunate, it represents
ranges that were simply skipped without the patch. As a result
of the scanning and hinting faults, many more pages were also
migrated but as the time to completion is reduced, the overhead
is offset by the gain.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Raghavendra K T <raghavendra.kt@amd.com>
Link: https://lore.kernel.org/r/20231010083143.19593-7-mgorman@techsingularity.net
NUMA Balancing skips VMAs when the current task has not trapped a NUMA
fault within the VMA. If the VMA is skipped then mm->numa_scan_offset
advances and a task that is trapping faults within the VMA may never
fully update PTEs within the VMA.
Force tasks to update PTEs for partially scanned PTEs. The VMA will
be tagged for NUMA hints by some task but this removes some of the
benefit of tracking PID activity within a VMA. A follow-on patch
will mitigate this problem.
The test cases and machines evaluated did not trigger the corner case so
the performance results are neutral with only small changes within the
noise from normal test-to-test variance. However, the next patch makes
the corner case easier to trigger.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Raghavendra K T <raghavendra.kt@amd.com>
Link: https://lore.kernel.org/r/20231010083143.19593-6-mgorman@techsingularity.net
Recent NUMA hinting faulting activity is reset approximately every
VMA_PID_RESET_PERIOD milliseconds. However, if the current task has not
accessed a VMA then the reset check is missed and the reset is potentially
deferred forever. Check if the PID activity information should be reset
before checking if the current task recently trapped a NUMA hinting fault.
[ mgorman@techsingularity.net: Rewrite changelog ]
Suggested-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Raghavendra K T <raghavendra.kt@amd.com>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20231010083143.19593-5-mgorman@techsingularity.net
NUMA balancing skips or scans VMAs for a variety of reasons. In preparation
for completing scans of VMAs regardless of PID access, trace the reasons
why a VMA was skipped. In a later patch, the tracing will be used to track
if a VMA was forcibly scanned.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20231010083143.19593-4-mgorman@techsingularity.net
The access_pids[] field name is somewhat ambiguous as no PIDs are accessed.
Similarly, it's not clear that next_pid_reset is related to access_pids[].
Rename the fields to more accurately reflect their purpose.
[ mingo: Rename in the comments too. ]
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20231010083143.19593-3-mgorman@techsingularity.net
Move it out of the .c file into the shared scheduler-internal header file,
to gain type-checking.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Shrikanth Hegde <sshegde@linux.vnet.ibm.com>
Cc: Valentin Schneider <vschneid@redhat.com>
Link: https://lore.kernel.org/r/20231009060037.170765-3-sshegde@linux.vnet.ibm.com
The 'sched_energy_aware' sysctl is available for the admin to disable/enable
energy aware scheduling(EAS). EAS is enabled only if few conditions are
met by the platform. They are, asymmetric CPU capacity, no SMT,
schedutil CPUfreq governor, frequency invariant load tracking etc.
A platform may boot without EAS capability, but could gain such
capability at runtime. For example, changing/registering the cpufreq
governor to schedutil.
At present, though platform doesn't support EAS, this sysctl returns 1
and it ends up calling build_perf_domains on write to 1 and
NOP when writing to 0. That is confusing and un-necessary.
Desired behavior would be to have this sysctl to enable/disable the EAS
on supported platform. On non-supported platform write to the sysctl
would return not supported error and read of the sysctl would return
empty. So sched_energy_aware returns empty - EAS is not possible at this moment
This will include EAS capable platforms which have at least one EAS
condition false during startup, e.g. not using the schedutil cpufreq governor
sched_energy_aware returns 0 - EAS is supported but disabled by admin.
sched_energy_aware returns 1 - EAS is supported and enabled.
User can find out the reason why EAS is not possible by checking
info messages. sched_is_eas_possible returns true if the platform
can do EAS at this moment.
Signed-off-by: Shrikanth Hegde <sshegde@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lore.kernel.org/r/20231009060037.170765-3-sshegde@linux.vnet.ibm.com
Update_triggers() always returns now + group->rtpoll_min_period, and the
return value is only used by psi_rtpoll_work(), so change update_triggers()
to a void function, let group->rtpoll_next_update = now +
group->rtpoll_min_period directly.
This will avoid unnecessary function return value passing & simplifies
the function.
[ mingo: Updated changelog ]
Suggested-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/202310092024289721617@zte.com.cn
The Energy Aware Scheduler (EAS) estimates the energy consumption
of placing a task on different CPUs. The goal is to minimize this
energy consumption. Estimating the energy of different task placements
is increasingly complex with the size of the platform.
To avoid having a slow wake-up path, EAS is only enabled if this
complexity is low enough.
The current complexity limit was set in:
b68a4c0dba ("sched/topology: Disable EAS on inappropriate platforms")
... based on the first implementation of EAS, which was re-computing
the power of the whole platform for each task placement scenario, see:
390031e4c3 ("sched/fair: Introduce an energy estimation helper function")
... but the complexity of EAS was reduced in:
eb92692b25 ("sched/fair: Speed-up energy-aware wake-ups")
... and find_energy_efficient_cpu() (feec) algorithm was updated in:
3e8c6c9aac ("sched/fair: Remove task_util from effective utilization in feec()")
find_energy_efficient_cpu() (feec) is now doing:
feec()
\_ for_each_pd(pd) [0]
// get max_spare_cap_cpu and compute_prev_delta
\_ for_each_cpu(pd) [1]
\_ eenv_pd_busy_time(pd) [2]
\_ for_each_cpu(pd)
// compute_energy(pd) without the task
\_ eenv_pd_max_util(pd, -1) [3.0]
\_ for_each_cpu(pd)
\_ em_cpu_energy(pd, -1)
\_ for_each_ps(pd)
// compute_energy(pd) with the task on prev_cpu
\_ eenv_pd_max_util(pd, prev_cpu) [3.1]
\_ for_each_cpu(pd)
\_ em_cpu_energy(pd, prev_cpu)
\_ for_each_ps(pd)
// compute_energy(pd) with the task on max_spare_cap_cpu
\_ eenv_pd_max_util(pd, max_spare_cap_cpu) [3.2]
\_ for_each_cpu(pd)
\_ em_cpu_energy(pd, max_spare_cap_cpu)
\_ for_each_ps(pd)
[3.1] happens only once since prev_cpu is unique. With the same
definitions for nr_pd, nr_cpus and nr_ps, the complexity is of:
nr_pd * (2 * [nr_cpus in pd] + 2 * ([nr_cpus in pd] + [nr_ps in pd]))
+ ([nr_cpus in pd] + [nr_ps in pd])
[0] * ( [1] + [2] + [3.0] + [3.2] )
+ [3.1]
= nr_pd * (4 * [nr_cpus in pd] + 2 * [nr_ps in pd])
+ [nr_cpus in prev pd] + nr_ps
The complexity limit was set to 2048 in:
b68a4c0dba ("sched/topology: Disable EAS on inappropriate platforms")
... to make "EAS usable up to 16 CPUs with per-CPU DVFS and less than 8
performance states each". For the same platform, the complexity would
actually be of:
16 * (4 + 2 * 7) + 1 + 7 = 296
Since the EAS complexity was greatly reduced since the limit was
introduced, bigger platforms can handle EAS.
For instance, a platform with 112 CPUs with 7 performance states
each would not reach it:
112 * (4 + 2 * 7) + 1 + 7 = 2024
To reflect this improvement in the underlying EAS code, remove
the EAS complexity check.
Note that a limit on the number of CPUs still holds against
EM_MAX_NUM_CPUS to avoid overflows during the energy estimation.
[ mingo: Updates to the changelog. ]
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20231009060037.170765-2-sshegde@linux.vnet.ibm.com
Remove the rq::cpu_capacity_orig field and use arch_scale_cpu_capacity()
instead.
The scheduler uses 3 methods to get access to a CPU's max compute capacity:
- arch_scale_cpu_capacity(cpu) which is the default way to get a CPU's capacity.
- cpu_capacity_orig field which is periodically updated with
arch_scale_cpu_capacity().
- capacity_orig_of(cpu) which encapsulates rq->cpu_capacity_orig.
There is no real need to save the value returned by arch_scale_cpu_capacity()
in struct rq. arch_scale_cpu_capacity() returns:
- either a per_cpu variable.
- or a const value for systems which have only one capacity.
Remove rq::cpu_capacity_orig and use arch_scale_cpu_capacity() everywhere.
No functional changes.
Some performance tests on Arm64:
- small SMP device (hikey): no noticeable changes
- HMP device (RB5): hackbench shows minor improvement (1-2%)
- large smp (thx2): hackbench and tbench shows minor improvement (1%)
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20231009103621.374412-2-vincent.guittot@linaro.org
Doing this matches the natural type of 'int' based calculus
in sched_rt_handler(), and also enables the adding in of a
correct upper bounds check on the sysctl interface.
[ mingo: Rewrote the changelog. ]
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20231008021538.3063250-1-yajun.deng@linux.dev
find_new_ilb() returns nr_cpu_ids on failure - which is the usual
cpumask bitops return pattern, but is weird & unnecessary in this
context: not only is it a global variable, it it is a +1 out of
bounds CPU index and also has different signedness ...
Its only user, kick_ilb(), then checks the return against nr_cpu_ids
to decide to return. There's no other use.
So instead of this, use a standard -1 return on failure to find an
idle CPU, as the argument is signed already.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Link: https://lore.kernel.org/r/20231006102518.2452758-4-mingo@kernel.org
The old pick_eevdf() could fail to find the actual earliest eligible
deadline when it descended to the right looking for min_deadline, but
it turned out that that min_deadline wasn't actually eligible. In that
case we need to go back and search through any left branches we
skipped looking for the actual best _eligible_ min_deadline.
This is more expensive, but still O(log n), and at worst should only
involve descending two branches of the rbtree.
I've run this through a userspace stress test (thank you
tools/lib/rbtree.c), so hopefully this implementation doesn't miss any
corner cases.
Fixes: 147f3efaa2 ("sched/fair: Implement an EEVDF-like scheduling policy")
Signed-off-by: Ben Segall <bsegall@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/xm261qego72d.fsf_-_@google.com
Marek and Biju reported instances of:
"EEVDF scheduling fail, picking leftmost"
which Mike correlated with cgroup scheduling and the min_deadline heap
getting corrupted; some trace output confirms:
> And yeah, min_deadline is hosed somehow:
>
> validate_cfs_rq: --- /
> __print_se: ffff88845cf48080 w: 1024 ve: -58857638 lag: 870381 vd: -55861854 vmd: -66302085 E (11372/tr)
> __print_se: ffff88810d165800 w: 25 ve: -80323686 lag: 22336429 vd: -41496434 vmd: -66302085 E (-1//autogroup-31)
> __print_se: ffff888108379000 w: 25 ve: 0 lag: -57987257 vd: 114632828 vmd: 114632828 N (-1//autogroup-33)
> validate_cfs_rq: min_deadline: -55861854 avg_vruntime: -62278313462 / 1074 = -57987256
Turns out that reweight_entity(), which tries really hard to be fast,
does not do the normal dequeue+update+enqueue pattern but *does* scale
the deadline.
However, it then fails to propagate the updated deadline value up the
heap.
Fixes: 147f3efaa2 ("sched/fair: Implement an EEVDF-like scheduling policy")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Biju Das <biju.das.jz@bp.renesas.com>
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Mike Galbraith <efault@gmx.de>
Link: https://lkml.kernel.org/r/20231006192445.GE743@noisy.programming.kicks-ass.net
Multiple blocked tasks are printed when the system hangs. They may have
the same parent pid, but belong to different task groups.
Printing tgid lets users better know whether these tasks are from the same
task group or not.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230720080516.1515297-1-yajun.deng@linux.dev
