cleanup the s390's use of the timer API
- del_timer() contains timer_pending() condition
- mod_timer(timer, expires) is equivalent to:
del_timer(timer);
timer->expires = expires;
add_timer(timer);
If the timer is inactive it will be activated, using add_timer() on
condition !timer_pending(&private->timer) is redundant.
Just cleanup, no logic change.
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Link: https://lore.kernel.org/r/20220322030057.1243196-1-liaoyu15@huawei.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Provide physical addresses whenever the hardware interface
expects it or a 32-bit value used for tracking.
Variable sclp_early_sccb gets initialized in the decompressor
and points to an address in physcal memory. Yet, it is used
as virtual memory pointer and therefore should be converted.
Note, the other two __bootdata variables sclp_info_sccb and
sclp_info_sccb_valid contain plain data, but no pointers and
do need any special care.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Add __nonstring annotation, since the missing string termination for
id member of sclp_trace_entry is intended. This way we get rid of this
warning:
drivers/s390/char/sclp.c:84:9: warning: ‘strncpy’ output truncated before terminating nul copying 4 bytes from a string of the same length [-Wstringop-truncation]
84 | strncpy(e.id, id, sizeof(e.id));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Add tracing of interactions between the SCLP base driver, firmware and
other drivers to support problem determination in case of SCLP-related
issues.
For that purpose this patch introduces two new s390dbf debug areas:
- sclp: An abbreviated log of all common interactions
- sclp_err: A full log of failed or abnormal interactions
Tracing of full SCCB contents can be enabled for the sclp area by
setting its debug level to maximum (6).
Overview of added trace events:
* Firmware interaction:
- SRV1: Service call about to be issued
- SRV2: Service call was issued
- INT: Interrupt received
* Driver interaction:
- RQAD: Request was added
- RQOK: Request success
- RQAB: Request aborted
- RQTM: Request timed out
- REG: Event listener registered
- UREG: Event listener unregistered
- EVNT: Event callback
- STCG: State-change callback
* Abnormal events:
- TMO: A timeout occurred
- UNEX: Unexpected SCCB completion
* Other (not traced at default level):
- SYN1: Synchronous wait start
- SYN2: Synchronous wait end
Since the SCLP interface is used by console drivers this patch also
moves s390dbf printks outside the critical section protected by debug
area locks to prevent a potential deadlock that would otherwise be
introduced between console_owner --> sclp_lock --> sclp_debug.lock.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
- Rework inline asm to get rid of error prone "register asm" constructs,
which are problematic especially when code instrumentation is enabled. In
particular introduce and use register pair union to allocate even/odd
register pairs. Unfortunately this breaks compatibility with older
clang compilers and minimum clang version for s390 has been raised to 13.
https://lore.kernel.org/linux-next/CAK7LNARuSmPCEy-ak0erPrPTgZdGVypBROFhtw+=3spoGoYsyw@mail.gmail.com/
- Fix gcc 11 warnings, which triggered various minor reworks all over
the code.
- Add zstd kernel image compression support.
- Rework boot CPU lowcore handling.
- De-duplicate and move kernel memory layout setup logic earlier.
- Few fixes in preparation for FORTIFY_SOURCE performing compile-time
and run-time field bounds checking for mem functions.
- Remove broken and unused power management support leftovers in s390
drivers.
- Disable stack-protector for decompressor and purgatory to fix buildroot
build.
- Fix vt220 sclp console name to match the char device name.
- Enable HAVE_IOREMAP_PROT and add zpci_set_irq()/zpci_clear_irq() in
zPCI code.
- Remove some implausible WARN_ON_ONCEs and remove arch specific counter
transaction call backs in favour of default transaction handling in
perf code.
- Extend/add new uevents for online/config/mode state changes of
AP card / queue device in zcrypt.
- Minor entry and ccwgroup code improvements.
- Other small various fixes and improvements all over the code.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmDhuTEACgkQjYWKoQLX
FBjVlggAgDFBkDjlyfvrm4xzmHi7BJMmhrTJIONsSz+3tcA4/u5kE+Hrdrqxm0Uh
ZH4MXBxn4q4Fmoomhu5w5ZDe8o2ip0aN9fFNdsBoP8hurmQbL/IbdTnBETKMrKpV
XpogU2G7p+2nQ0+9+o6PS/vWlZhI88NVh8dWyRd2+5/XdMycgLv2Qm7NpQoACVw1
CbUvxP2PlpZ0wltLvNBKPg1xXMZa3GS0wbVUsS2jiWcr/3VzCqfTHenZJ/RadoE6
axG99QXCbLDMsJgVQcXtlI8K6Z461fAwbNtWZWC+Uq7o5pYuUFW1dovMg9WWF+7T
lFNqXyyNy5wwITRkvuzjlVTE8yzYYg==
=ADZ4
-----END PGP SIGNATURE-----
Merge tag 's390-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Rework inline asm to get rid of error prone "register asm"
constructs, which are problematic especially when code
instrumentation is enabled.
In particular introduce and use register pair union to allocate
even/odd register pairs. Unfortunately this breaks compatibility with
older clang compilers and minimum clang version for s390 has been
raised to 13.
https://lore.kernel.org/linux-next/CAK7LNARuSmPCEy-ak0erPrPTgZdGVypBROFhtw+=3spoGoYsyw@mail.gmail.com/
- Fix gcc 11 warnings, which triggered various minor reworks all over
the code.
- Add zstd kernel image compression support.
- Rework boot CPU lowcore handling.
- De-duplicate and move kernel memory layout setup logic earlier.
- Few fixes in preparation for FORTIFY_SOURCE performing compile-time
and run-time field bounds checking for mem functions.
- Remove broken and unused power management support leftovers in s390
drivers.
- Disable stack-protector for decompressor and purgatory to fix
buildroot build.
- Fix vt220 sclp console name to match the char device name.
- Enable HAVE_IOREMAP_PROT and add zpci_set_irq()/zpci_clear_irq() in
zPCI code.
- Remove some implausible WARN_ON_ONCEs and remove arch specific
counter transaction call backs in favour of default transaction
handling in perf code.
- Extend/add new uevents for online/config/mode state changes of AP
card / queue device in zcrypt.
- Minor entry and ccwgroup code improvements.
- Other small various fixes and improvements all over the code.
* tag 's390-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (91 commits)
s390/dasd: use register pair instead of register asm
s390/qdio: get rid of register asm
s390/ioasm: use symbolic names for asm operands
s390/ioasm: get rid of register asm
s390/cmf: get rid of register asm
s390/lib,string: get rid of register asm
s390/lib,uaccess: get rid of register asm
s390/string: get rid of register asm
s390/cmpxchg: use register pair instead of register asm
s390/mm,pages-states: get rid of register asm
s390/lib,xor: get rid of register asm
s390/timex: get rid of register asm
s390/hypfs: use register pair instead of register asm
s390/zcrypt: Switch to flexible array member
s390/speculation: Use statically initialized const for instructions
virtio/s390: get rid of open-coded kvm hypercall
s390/pci: add zpci_set_irq()/zpci_clear_irq()
scripts/min-tool-version.sh: Raise minimum clang version to 13.0.0 for s390
s390/ipl: use register pair instead of register asm
s390/mem_detect: fix tprot() program check new psw handling
...
kernel.h is being used as a dump for all kinds of stuff for a long time.
Here is the attempt to start cleaning it up by splitting out panic and
oops helpers.
There are several purposes of doing this:
- dropping dependency in bug.h
- dropping a loop by moving out panic_notifier.h
- unload kernel.h from something which has its own domain
At the same time convert users tree-wide to use new headers, although for
the time being include new header back to kernel.h to avoid twisted
indirected includes for existing users.
[akpm@linux-foundation.org: thread_info.h needs limits.h]
[andriy.shevchenko@linux.intel.com: ia64 fix]
Link: https://lkml.kernel.org/r/20210520130557.55277-1-andriy.shevchenko@linux.intel.com
Link: https://lkml.kernel.org/r/20210511074137.33666-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Co-developed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Power management support was removed for s390 with
commit 394216275c ("s390: remove broken hibernate / power management
support").
Remove leftover sclp base-related power management code. Note that we
keep the registration of the sclp platform driver since it is used to
externalize non-PM related attributes in sysfs.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The sccbs for init/read/sdias/early have to be located below 2 GB, and
they are currently defined as a static buffer.
With a relocatable kernel that could reside at any place in memory, this
will no longer guarantee the location below 2 GB, so use a dynamic
GFP_DMA allocation instead.
The sclp_early_sccb buffer needs special handling, as it can be used
very early, and by both the decompressor and also the decompressed
kernel. Therefore, a fixed 4 KB buffer is introduced at 0x11000, the
former PARMAREA_END. The new PARMAREA_END is now 0x12000, and it is
renamed to HEAD_END, as it is rather the end of head.S and not the end
of the parmarea.
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Qemu before version 2.11 does not implement the architecture correctly,
and does not allow for a mask size of size different than 4.
This patch introduces a compatibility mode for such systems, forcing
the mask sizes to 4.
Since the mask size is currently still 4 anyway, this patch should have
no impact whatsoever by itself, but it will be needed when the mask size
is increased to 64 bits in the next patch.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Switch the layout of the event masks to be a generic buffer, and
implement accessors to retrieve the values of the masks.
This will be needed in the next patches, where we will eventually switch
the mask size to 64 bits.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Replace hardcoded instances where 32 or unsigned int (or long) is used
for SCLP event masks, and replace with sizeof(sccb_mask_t) and
sccb_mask_t respectively.
This improves readability and prepares for when we will increase
sccb_mask_t to 64 bits.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
With all callbacks converted, and the timer callback prototype
switched over, the TIMER_FUNC_TYPE cast is no longer needed,
so remove it. Conversion was done with the following scripts:
perl -pi -e 's|\(TIMER_FUNC_TYPE\)||g' \
$(git grep TIMER_FUNC_TYPE | cut -d: -f1 | sort -u)
perl -pi -e 's|\(TIMER_DATA_TYPE\)||g' \
$(git grep TIMER_DATA_TYPE | cut -d: -f1 | sort -u)
The now unused macros are also dropped from include/linux/timer.h.
Signed-off-by: Kees Cook <keescook@chromium.org>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly. Instead of creating an external static
data variable, just define a separate callback which encodes the "force
restart" desire.
Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
[heiko.carstens@de.ibm.com: get rid of compile warning]
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We are trying to get rid of DRIVER_ATTR(), and the s390 drivers'
attributes can be trivially changed to use DRIVER_ATTR_RO() and
DRIVER_ATTR_WO().
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Cc: Ursula Braun <ubraun@linux.vnet.ibm.com>
Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: <linux-s390@vger.kernel.org>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch
- unifies the old sclp early code and the sclp early printk code, so
they can use common functions
- makes sure all sclp early functions and variables have the same
"sclp_early" prefix
- converts the sclp early printk code into readable code by using
existing data structures instead of hard coded magic arrays
- splits the early sclp code into two files: sclp_early.c and
sclp_early_core.c. The core file contains everything that is
required by the kernel decompressor and may not call functions not
contained within the core file. Otherwise the result would be a
link error.
- changes interrupt handling to be completely synchronous. The old
early sclp code had a small window which allowed to receive several
interrupts instead of exactly the single expected interrupt. This
did hide a subtle potential bug, which is fixed with this large
rework.
- contains a couple of small cleanups.
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Make sure the early sclp code does not generate any sclp requests
anymore as soon as the base sclp driver is active. Otherwise both
drivers may see unexpected requests or may miss expected interrupts.
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
sclp_sync_wait() disables all external interrupt classes except for
the service signal subclass.
The static mask used for that however is wrong. It clears a couple of
bits which shouldn't be cleared and on the other hand potentially does
not clear bits which should be cleared.
Fix this by using the same generic mask like we do it in our delay
implementation.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Dropping kernel messages during a console-buffer-full condition
is preferable to halting the system until console messages are
delivered, especially for production systems.
Update default for sclp_console_drop kernel parameter accordingly.
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@linux.vnet.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Let's also move the facilities into the sclp struct, so we can avoid
another separate external variable.
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
PTR_RET is deprecated. Do not recommend its usage anymore.
Use PTR_ERR_OR_ZERO instead.
Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Use the new defines for external interruption codes to get rid
of "magic" numbers in the s390 source code. And while we're at it,
also rename the (un-)register_external_interrupt function to
something shorter so that this patch does not exceed the 80
columns all over the place.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This patch adds a timeout option for queued requests and introduces
sclp_sync_request_timeout() to use this timer. With this, blocking the
system too long, e.g. during an SE reboot, can be avoided in critical
situations like CPU and memory hotplug.
Since there is no way to cancel a running request, this timeout only
applies to queued requests that have not yet been started.
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The result of the store-clock-fast (STCKF) instruction is a bit fuzzy.
It can happen that the value stored on one CPU is smaller than the value
stored on another CPU, although the order of the stores is the other
way around. This can cause deltas of get_tod_clock() values to become
negative when they should not be.
We need to be more careful with store-clock-fast, this patch partially
reverts git commit e4b7b4238e666682555461fa52eecd74652f36bb "time:
always use stckf instead of stck if available". The get_tod_clock()
function now uses the store-clock-extended (STCKE) instruction.
get_tod_clock_fast() can be used if the fuzziness of store-clock-fast
is acceptable e.g. for wait loops local to a CPU.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Let's not add a function for every external interrupt subclass for
which we need reference counting. Just have two register/unregister
functions which have a subclass parameter:
void irq_subclass_register(enum irq_subclass subclass);
void irq_subclass_unregister(enum irq_subclass subclass);
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Add a character misc device "sclp_ctl" that allows to run SCCBs
from user space using the SCLP_CTL_SCCB ioctl.
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Add a kernel parameter to be able to specify the number of pages to be
used as output buffer by the line-mode sclp driver and the vt220 sclp
driver. The current number of output pages is 6, if the service element
is unavailable the boot messages alone can fill up the output buffer.
If this happens the system blocks until the service element is working
again. For a large LPAR with many devices it is sensible to have the
ability to increase the output buffer size. To help to debug this
situation add a counter for the page-pool-empty situation and make it
available as a sclp driver attribute.
To avoid the system to stall until the service element works again
add another kernel parameter to allow to drop output buffers.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Fix name clash with some common code device drivers and add "tod"
to all tod clock access function names.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Now that irq sum accounting for /proc/stat's "intr" line works again we
have the oddity that the sum field (first field) contains only the sum
of the second (external irqs) and third field (I/O interrupts).
The reason for that is that these two fields are already sums of all other
fields. So if we would sum up everything we would count every interrupt
twice.
This is broken since the split interrupt accounting was merged two years
ago: 052ff461c8 "[S390] irq: have detailed
statistics for interrupt types".
To fix this remove the split interrupt fields from /proc/stat's "intr"
line again and only have them in /proc/interrupts.
This restores the old behaviour, seems to be the only sane fix and mimics
a behaviour from other architectures where /proc/interrupts also contains
more than /proc/stat's "intr" line does.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The return value was only internally used, so it's ok to change.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
For processing under KVM it is required to detect
the actual SCLP console type in order to set it as
preferred console.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The external interrupt handlers have a parameter called ext_int_code.
Besides the name this paramter does not only contain the ext_int_code
but in addition also the "cpu address" (POP) which caused the external
interrupt.
To make the code a bit more obvious pass a struct instead so the called
function can easily distinguish between external interrupt code and
cpu address. The cpu address field however is named "subcode" since
some external interrupt sources do not pass a cpu address but a
different parameter (or none at all).
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Merge irq.c and s390_ext.c into irq.c. That way all external interrupt
related functions are together.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Interrupt sources like pfault, sclp, dasd_diag and virtio all use the
service signal external interrupt subclass mask in control register 0
to enable and disable the corresponding interrupt.
Because no reference counting is implemented each subsystem thinks it
is the only user of subclass and sets and clears the bit like it wants.
This leads to case that unloading the dasd diag module under z/VM
causes both sclp and pfault interrupts to be masked. The result will
be locked up system sooner or later.
Fix this by introducing a new way to set (register) and clear
(unregister) the service signal subclass mask bit in cr0.
Also convert all drivers.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Use register_external_interrupt() instead of register_early_external_interrupt().
The early variant is not necessary since kmalloc works already.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Up to now /proc/interrupts only has statistics for external and i/o
interrupts but doesn't split up them any further.
This patch adds a line for every single interrupt source so that it
is possible to easier tell what the machine is/was doing.
Part of the output now looks like this;
CPU0 CPU2 CPU4
EXT: 3898 4232 2305
I/O: 782 315 245
CLK: 1029 1964 727 [EXT] Clock Comparator
IPI: 2868 2267 1577 [EXT] Signal Processor
TMR: 0 0 0 [EXT] CPU Timer
TAL: 0 0 0 [EXT] Timing Alert
PFL: 0 0 0 [EXT] Pseudo Page Fault
[...]
NMI: 0 1 1 [NMI] Machine Checks
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Read external interrupts parameters from the lowcore in the first
level interrupt handler in entry[64].S.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Fix the IRQ flag handling naming. In linux/irqflags.h under one configuration,
it maps:
local_irq_enable() -> raw_local_irq_enable()
local_irq_disable() -> raw_local_irq_disable()
local_irq_save() -> raw_local_irq_save()
...
and under the other configuration, it maps:
raw_local_irq_enable() -> local_irq_enable()
raw_local_irq_disable() -> local_irq_disable()
raw_local_irq_save() -> local_irq_save()
...
This is quite confusing. There should be one set of names expected of the
arch, and this should be wrapped to give another set of names that are expected
by users of this facility.
Change this to have the arch provide:
flags = arch_local_save_flags()
flags = arch_local_irq_save()
arch_local_irq_restore(flags)
arch_local_irq_disable()
arch_local_irq_enable()
arch_irqs_disabled_flags(flags)
arch_irqs_disabled()
arch_safe_halt()
Then linux/irqflags.h wraps these to provide:
raw_local_save_flags(flags)
raw_local_irq_save(flags)
raw_local_irq_restore(flags)
raw_local_irq_disable()
raw_local_irq_enable()
raw_irqs_disabled_flags(flags)
raw_irqs_disabled()
raw_safe_halt()
with type checking on the flags 'arguments', and then wraps those to provide:
local_save_flags(flags)
local_irq_save(flags)
local_irq_restore(flags)
local_irq_disable()
local_irq_enable()
irqs_disabled_flags(flags)
irqs_disabled()
safe_halt()
with tracing included if enabled.
The arch functions can now all be inline functions rather than some of them
having to be macros.
Signed-off-by: David Howells <dhowells@redhat.com> [X86, FRV, MN10300]
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [Tile]
Signed-off-by: Michal Simek <monstr@monstr.eu> [Microblaze]
Tested-by: Catalin Marinas <catalin.marinas@arm.com> [ARM]
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [AVR]
Acked-by: Tony Luck <tony.luck@intel.com> [IA-64]
Acked-by: Hirokazu Takata <takata@linux-m32r.org> [M32R]
Acked-by: Greg Ungerer <gerg@uclinux.org> [M68K/M68KNOMMU]
Acked-by: Ralf Baechle <ralf@linux-mips.org> [MIPS]
Acked-by: Kyle McMartin <kyle@mcmartin.ca> [PA-RISC]
Acked-by: Paul Mackerras <paulus@samba.org> [PowerPC]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [S390]
Acked-by: Chen Liqin <liqin.chen@sunplusct.com> [Score]
Acked-by: Matt Fleming <matt@console-pimps.org> [SH]
Acked-by: David S. Miller <davem@davemloft.net> [Sparc]
Acked-by: Chris Zankel <chris@zankel.net> [Xtensa]
Reviewed-by: Richard Henderson <rth@twiddle.net> [Alpha]
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> [H8300]
Cc: starvik@axis.com [CRIS]
Cc: jesper.nilsson@axis.com [CRIS]
Cc: linux-cris-kernel@axis.com
In particular, several occurances of funny versions of 'success',
'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address',
'beginning', 'desirable', 'separate' and 'necessary' are fixed.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Joe Perches <joe@perches.com>
Cc: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The SCLP base driver defines a new notifier call back for all upper level SCLP
drivers, like the SCLP console, etc. This guarantees that in suspend first the
upper level drivers are suspended and afterwards the SCLP base driver. For
resume it is the other way round. The SCLP base driver itself registers a
new platform device at the platform bus and gets PM notifications via
the dev_pm_ops.
In suspend, the SCLP base driver switches off the receiver and sender mask
This is done in sclp_deactivate(). After suspend all new requests will be
rejected with -EIO and no more interrupts will be received, because the masks
are switched off. For resume the sender and receiver masks are reset in
the sclp_reactivate() function.
When the SCLP console is suspended, all new messages are cached in the
sclp console buffers. In resume, all the cached messages are written to the
console. In addition to that we have an early resume function that removes
the cached messages from the suspend image.
Signed-off-by: Michael Holzheu <holzheu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Handle a malformed hardware response which some versions of the
Support Element (SE) may present during SE restart and which otherwise
would result in an endless loop in function sclp_dispatch_evbufs.
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
sclp_sync_wait wait synchronously for an sclp interrupt and disables
timer interrupts. However on the irq enter paths there is an extra
check if a timer interrupt would be due and calls the timer callback.
This would schedule softirqs in the wrong context.
So introduce local_tick_enable/disable which prevents this.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Most likely it is broken anyway because of the changes in memory
detection. Since we can't test it and there are probably better ways
that using a P390 card, remove support for it.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
In case the supported sclp facilities change
the new mask should be saved.
Cc: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Make state change events adjust the correct mask by cleaning up
naming inconsistencies. Also remove chance for lockup by removing
unnecessary mask related check before reading events.
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
