Add KUnit tests for the contiguous physical memory regions merging
functionality from the Nitro Enclaves misc device logic.
We can build the test binary with the following configuration:
CONFIG_KUNIT=y
CONFIG_NITRO_ENCLAVES=m
CONFIG_NITRO_ENCLAVES_MISC_DEV_TEST=y
and install the nitro_enclaves module to run the testcases.
We'll see the following message using dmesg if everything goes well:
[...] # Subtest: ne_misc_dev_test
[...] 1..1
[...] (NULL device *): Physical mem region address is not 2 MiB aligned
[...] (NULL device *): Physical mem region size is not multiple of 2 MiB
[...] (NULL device *): Physical mem region address is not 2 MiB aligned
[...] ok 1 - ne_misc_dev_test_merge_phys_contig_memory_regions
[...] ok 1 - ne_misc_dev_test
Reviewed-by: Andra Paraschiv <andraprs@amazon.com>
Signed-off-by: Longpeng <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20211107140918.2106-5-longpeng2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the initial setup for the KUnit tests that will target the Nitro
Enclaves misc device functionality.
Reviewed-by: Andra Paraschiv <andraprs@amazon.com>
Signed-off-by: Longpeng <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20211107140918.2106-4-longpeng2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sanity check the physical memory regions during the merge of contiguous
regions. Thus we can test the physical memory regions setup logic
individually, including the error cases coming from the sanity checks.
Reviewed-by: Andra Paraschiv <andraprs@amazon.com>
Signed-off-by: Longpeng <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20211107140918.2106-3-longpeng2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There can be cases when there are more memory regions that need to be
set for an enclave than the maximum supported number of memory regions
per enclave. One example can be when the memory regions are backed by 2
MiB hugepages (the minimum supported hugepage size).
Let's merge the adjacent regions if they are physically contiguous. This
way the final number of memory regions is less than before merging and
could potentially avoid reaching maximum.
Reviewed-by: Andra Paraschiv <andraprs@amazon.com>
Signed-off-by: Longpeng <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20211107140918.2106-2-longpeng2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
This was generated with coccinelle:
@@
expression E;
@@
- flush_workqueue(E);
destroy_workqueue(E);
Reviewed-by: Andra Paraschiv <andraprs@amazon.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/d57f5c7e362837a8dfcde0d726a76b56f114e619.1636736947.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update the codebase formatting to fix the reports from the checkpatch
script, to match the open parenthesis.
Reviewed-by: George-Aurelian Popescu <popegeo@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20210827154930.40608-6-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update the copyright statement to include 2021, as a change has been
made over this year.
Check commit d874742f6a ("nitro_enclaves: Set Bus Master for the NE
PCI device") for the codebase update from this file (ne_pci_dev.c).
Reviewed-by: George-Aurelian Popescu <popegeo@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20210827154930.40608-5-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the reported issue from the kernel-doc script, to have a comment per
identifier.
Reviewed-by: George-Aurelian Popescu <popegeo@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20210827154930.40608-4-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable Bus Master for the NE PCI device, according to the PCI spec
for submitting memory or I/O requests:
Master Enable – Controls the ability of a PCI Express
Endpoint to issue Memory and I/O Read/Write Requests, and
the ability of a Root or Switch Port to forward Memory and
I/O Read/Write Requests in the Upstream direction
Cc: Andra Paraschiv <andraprs@amazon.com>
Cc: Alexandru Vasile <lexnv@amazon.com>
Cc: Alexandru Ciobotaru <alcioa@amazon.com>
Reviewed-by: Andra Paraschiv <andraprs@amazon.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20210621004046.1419-1-longpeng2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A failing usercopy of the slot uid will lead to a stale entry in the
file descriptor table as put_unused_fd() won't release it. This enables
userland to refer to a dangling 'file' object through that still valid
file descriptor, leading to all kinds of use-after-free exploitation
scenarios.
Exchanging put_unused_fd() for close_fd(), ksys_close() or alike won't
solve the underlying issue, as the file descriptor might have been
replaced in the meantime, e.g. via userland calling close() on it
(leading to a NULL pointer dereference in the error handling code as
'fget(enclave_fd)' will return a NULL pointer) or by dup2()'ing a
completely different file object to that very file descriptor, leading
to the same situation: a dangling file descriptor pointing to a freed
object -- just in this case to a file object of user's choosing.
Generally speaking, after the call to fd_install() the file descriptor
is live and userland is free to do whatever with it. We cannot rely on
it to still refer to our enclave object afterwards. In fact, by abusing
userfaultfd() userland can hit the condition without any racing and
abuse the error handling in the nitro code as it pleases.
To fix the above issues, defer the call to fd_install() until all
possible errors are handled. In this case it's just the usercopy, so do
it directly in ne_create_vm_ioctl() itself.
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210429165941.27020-2-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update the assigned value of the poll result to be EPOLLHUP instead of
POLLHUP to match the __poll_t type.
While at it, simplify the logic of setting the mask result of the poll
function.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20201102173622.32169-1-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add Makefile for the Nitro Enclaves driver, considering the option set
in the kernel config.
Changelog
v9 -> v10
* Update commit message to include the changelog before the SoB tag(s).
v8 -> v9
* Remove -Wall flags, could use W=1 as an option for this.
v7 -> v8
* No changes.
v6 -> v7
* No changes.
v5 -> v6
* No changes.
v4 -> v5
* No changes.
v3 -> v4
* No changes.
v2 -> v3
* Remove the GPL additional wording as SPDX-License-Identifier is
already in place.
v1 -> v2
* Update path to Makefile to match the drivers/virt/nitro_enclaves
directory.
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20200921121732.44291-16-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add kernel config entry for Nitro Enclaves, including dependencies.
Changelog
v9 -> v10
* Update commit message to include the changelog before the SoB tag(s).
v8 -> v9
* No changes.
v7 -> v8
* No changes.
v6 -> v7
* Remove, for now, the dependency on ARM64 arch. x86 is currently
supported, with Arm to come afterwards. The NE kernel driver can be
built for aarch64 arch.
v5 -> v6
* No changes.
v4 -> v5
* Add arch dependency for Arm / x86.
v3 -> v4
* Add PCI and SMP dependencies.
v2 -> v3
* Remove the GPL additional wording as SPDX-License-Identifier is
already in place.
v1 -> v2
* Update path to Kconfig to match the drivers/virt/nitro_enclaves
directory.
* Update help in Kconfig.
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20200921121732.44291-15-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An enclave is associated with an fd that is returned after the enclave
creation logic is completed. This enclave fd is further used to setup
enclave resources. Once the enclave needs to be terminated, the enclave
fd is closed.
Add logic for enclave termination, that is mapped to the enclave fd
release callback. Free the internal enclave info used for bookkeeping.
Changelog
v9 -> v10
* Update commit message to include the changelog before the SoB tag(s).
v8 -> v9
* Use the ne_devs data structure to get the refs for the NE PCI device.
v7 -> v8
* No changes.
v6 -> v7
* Remove the pci_dev_put() call as the NE misc device parent field is
used now to get the NE PCI device.
* Update the naming and add more comments to make more clear the logic
of handling full CPU cores and dedicating them to the enclave.
v5 -> v6
* Update documentation to kernel-doc format.
* Use directly put_page() instead of unpin_user_pages(), to match the
get_user_pages() calls.
v4 -> v5
* Release the reference to the NE PCI device on enclave fd release.
* Adapt the logic to cpumask enclave vCPU ids and CPU cores.
* Remove sanity checks for situations that shouldn't happen, only if
buggy system or broken logic at all.
v3 -> v4
* Use dev_err instead of custom NE log pattern.
v2 -> v3
* Remove the WARN_ON calls.
* Update static calls sanity checks.
* Update kzfree() calls to kfree().
v1 -> v2
* Add log pattern for NE.
* Remove the BUG_ON calls.
* Update goto labels to match their purpose.
* Add early exit in release() if there was a slot alloc error in the fd
creation path.
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Alexandru Vasile <lexnv@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20200921121732.44291-14-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After all the enclave resources are set, the enclave is ready for
beginning to run.
Add ioctl command logic for starting an enclave after all its resources,
memory regions and CPUs, have been set.
The enclave start information includes the local channel addressing -
vsock CID - and the flags associated with the enclave.
Changelog
v9 -> v10
* Update commit message to include the changelog before the SoB tag(s).
v8 -> v9
* Use the ne_devs data structure to get the refs for the NE PCI device.
v7 -> v8
* Add check for invalid enclave CID value e.g. well-known CIDs and
parent VM CID.
* Add custom error code for incorrect flag in enclave start info and
invalid enclave CID.
v6 -> v7
* Update the naming and add more comments to make more clear the logic
of handling full CPU cores and dedicating them to the enclave.
v5 -> v6
* Check for invalid enclave start flags.
* Update documentation to kernel-doc format.
v4 -> v5
* Add early exit on enclave start ioctl function call error.
* Move sanity checks in the enclave start ioctl function, outside of the
switch-case block.
* Remove log on copy_from_user() / copy_to_user() failure.
v3 -> v4
* Use dev_err instead of custom NE log pattern.
* Update the naming for the ioctl command from metadata to info.
* Check for minimum enclave memory size.
v2 -> v3
* Remove the WARN_ON calls.
* Update static calls sanity checks.
v1 -> v2
* Add log pattern for NE.
* Check if enclave state is init when starting an enclave.
* Remove the BUG_ON calls.
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Alexandru Vasile <lexnv@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20200921121732.44291-13-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Another resource that is being set for an enclave is memory. User space
memory regions, that need to be backed by contiguous memory regions,
are associated with the enclave.
One solution for allocating / reserving contiguous memory regions, that
is used for integration, is hugetlbfs. The user space process that is
associated with the enclave passes to the driver these memory regions.
The enclave memory regions need to be from the same NUMA node as the
enclave CPUs.
Add ioctl command logic for setting user space memory region for an
enclave.
Changelog
v9 -> v10
* Update commit message to include the changelog before the SoB tag(s).
v8 -> v9
* Use the ne_devs data structure to get the refs for the NE PCI device.
v7 -> v8
* Add early check, while getting user pages, to be multiple of 2 MiB for
the pages that back the user space memory region.
* Add custom error code for incorrect user space memory region flag.
* Include in a separate function the sanity checks for each page of the
user space memory region.
v6 -> v7
* Update check for duplicate user space memory regions to cover
additional possible scenarios.
v5 -> v6
* Check for max number of pages allocated for the internal data
structure for pages.
* Check for invalid memory region flags.
* Check for aligned physical memory regions.
* Update documentation to kernel-doc format.
* Check for duplicate user space memory regions.
* Use directly put_page() instead of unpin_user_pages(), to match the
get_user_pages() calls.
v4 -> v5
* Add early exit on set memory region ioctl function call error.
* Remove log on copy_from_user() failure.
* Exit without unpinning the pages on NE PCI dev request failure as
memory regions from the user space range may have already been added.
* Add check for the memory region user space address to be 2 MiB
aligned.
* Update logic to not have a hardcoded check for 2 MiB memory regions.
v3 -> v4
* Check enclave memory regions are from the same NUMA node as the
enclave CPUs.
* Use dev_err instead of custom NE log pattern.
* Update the NE ioctl call to match the decoupling from the KVM API.
v2 -> v3
* Remove the WARN_ON calls.
* Update static calls sanity checks.
* Update kzfree() calls to kfree().
v1 -> v2
* Add log pattern for NE.
* Update goto labels to match their purpose.
* Remove the BUG_ON calls.
* Check if enclave max memory regions is reached when setting an enclave
memory region.
* Check if enclave state is init when setting an enclave memory region.
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Alexandru Vasile <lexnv@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20200921121732.44291-12-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before setting the memory regions for the enclave, the enclave image
needs to be placed in memory. After the memory regions are set, this
memory cannot be used anymore by the VM, being carved out.
Add ioctl command logic to get the offset in enclave memory where to
place the enclave image. Then the user space tooling copies the enclave
image in the memory using the given memory offset.
Changelog
v9 -> v10
* Update commit message to include the changelog before the SoB tag(s).
v8 -> v9
* No changes.
v7 -> v8
* Add custom error code for incorrect enclave image load info flag.
v6 -> v7
* No changes.
v5 -> v6
* Check for invalid enclave image load flags.
v4 -> v5
* Check for the enclave not being started when invoking this ioctl call.
* Remove log on copy_from_user() / copy_to_user() failure.
v3 -> v4
* Use dev_err instead of custom NE log pattern.
* Set enclave image load offset based on flags.
* Update the naming for the ioctl command from metadata to info.
v2 -> v3
* No changes.
v1 -> v2
* New in v2.
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20200921121732.44291-11-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An enclave, before being started, has its resources set. One of its
resources is CPU.
A NE CPU pool is set and enclave CPUs are chosen from it. Offline the
CPUs from the NE CPU pool during the pool setup and online them back
during the NE CPU pool teardown. The CPU offline is necessary so that
there would not be more vCPUs than physical CPUs available to the
primary / parent VM. In that case the CPUs would be overcommitted and
would change the initial configuration of the primary / parent VM of
having dedicated vCPUs to physical CPUs.
The enclave CPUs need to be full cores and from the same NUMA node. CPU
0 and its siblings have to remain available to the primary / parent VM.
Add ioctl command logic for setting an enclave vCPU.
Changelog
v9 -> v10
* Update commit message to include the changelog before the SoB tag(s).
v8 -> v9
* Use the ne_devs data structure to get the refs for the NE PCI device.
v7 -> v8
* No changes.
v6 -> v7
* Check for error return value when setting the kernel parameter string.
* Use the NE misc device parent field to get the NE PCI device.
* Update the naming and add more comments to make more clear the logic
of handling full CPU cores and dedicating them to the enclave.
* Calculate the number of threads per core and not use smp_num_siblings
that is x86 specific.
v5 -> v6
* Check CPUs are from the same NUMA node before going through CPU
siblings during the NE CPU pool setup.
* Update documentation to kernel-doc format.
v4 -> v5
* Set empty string in case of invalid NE CPU pool.
* Clear NE CPU pool mask on pool setup failure.
* Setup NE CPU cores out of the NE CPU pool.
* Early exit on NE CPU pool setup if enclave(s) already running.
* Remove sanity checks for situations that shouldn't happen, only if
buggy system or broken logic at all.
* Add check for maximum vCPU id possible before looking into the CPU
pool.
* Remove log on copy_from_user() / copy_to_user() failure and on admin
capability check for setting the NE CPU pool.
* Update the ioctl call to not create a file descriptor for the vCPU.
* Split the CPU pool usage logic in 2 separate functions - one to get a
CPU from the pool and the other to check the given CPU is available in
the pool.
v3 -> v4
* Setup the NE CPU pool at runtime via a sysfs file for the kernel
parameter.
* Check enclave CPUs to be from the same NUMA node.
* Use dev_err instead of custom NE log pattern.
* Update the NE ioctl call to match the decoupling from the KVM API.
v2 -> v3
* Remove the WARN_ON calls.
* Update static calls sanity checks.
* Update kzfree() calls to kfree().
* Remove file ops that do nothing for now - open, ioctl and release.
v1 -> v2
* Add log pattern for NE.
* Update goto labels to match their purpose.
* Remove the BUG_ON calls.
* Check if enclave state is init when setting enclave vCPU.
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Alexandru Vasile <lexnv@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20200921121732.44291-10-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add ioctl command logic for enclave VM creation. It triggers a slot
allocation. The enclave resources will be associated with this slot and
it will be used as an identifier for triggering enclave run.
Return a file descriptor, namely enclave fd. This is further used by the
associated user space enclave process to set enclave resources and
trigger enclave termination.
The poll function is implemented in order to notify the enclave process
when an enclave exits without a specific enclave termination command
trigger e.g. when an enclave crashes.
Changelog
v9 -> v10
* Update commit message to include the changelog before the SoB tag(s).
v8 -> v9
* Use the ne_devs data structure to get the refs for the NE PCI device.
v7 -> v8
* No changes.
v6 -> v7
* Use the NE misc device parent field to get the NE PCI device.
* Update the naming and add more comments to make more clear the logic
of handling full CPU cores and dedicating them to the enclave.
v5 -> v6
* Update the code base to init the ioctl function in this patch.
* Update documentation to kernel-doc format.
v4 -> v5
* Release the reference to the NE PCI device on create VM error.
* Close enclave fd on copy_to_user() failure; rename fd to enclave fd
while at it.
* Remove sanity checks for situations that shouldn't happen, only if
buggy system or broken logic at all.
* Remove log on copy_to_user() failure.
v3 -> v4
* Use dev_err instead of custom NE log pattern.
* Update the NE ioctl call to match the decoupling from the KVM API.
* Add metadata for the NUMA node for the enclave memory and CPUs.
v2 -> v3
* Remove the WARN_ON calls.
* Update static calls sanity checks.
* Update kzfree() calls to kfree().
* Remove file ops that do nothing for now - open.
v1 -> v2
* Add log pattern for NE.
* Update goto labels to match their purpose.
* Remove the BUG_ON calls.
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Alexandru Vasile <lexnv@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20200921121732.44291-9-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Nitro Enclaves driver provides an ioctl interface to the user space
for enclave lifetime management e.g. enclave creation / termination and
setting enclave resources such as memory and CPU.
This ioctl interface is mapped to a Nitro Enclaves misc device.
Changelog
v9 -> v10
* Update commit message to include the changelog before the SoB tag(s).
v8 -> v9
* Use the ne_devs data structure to get the refs for the NE misc device
in the NE PCI device driver logic.
v7 -> v8
* Add define for the CID of the primary / parent VM.
* Update the NE PCI driver shutdown logic to include misc device
deregister.
v6 -> v7
* Set the NE PCI device the parent of the NE misc device to be able to
use it in the ioctl logic.
* Update the naming and add more comments to make more clear the logic
of handling full CPU cores and dedicating them to the enclave.
v5 -> v6
* Remove the ioctl to query API version.
* Update documentation to kernel-doc format.
v4 -> v5
* Update the size of the NE CPU pool string from 4096 to 512 chars.
v3 -> v4
* Use dev_err instead of custom NE log pattern.
* Remove the NE CPU pool init during kernel module loading, as the CPU
pool is now setup at runtime, via a sysfs file for the kernel
parameter.
* Add minimum enclave memory size definition.
v2 -> v3
* Remove the GPL additional wording as SPDX-License-Identifier is
already in place.
* Remove the WARN_ON calls.
* Remove linux/bug and linux/kvm_host includes that are not needed.
* Remove "ratelimited" from the logs that are not in the ioctl call
paths.
* Remove file ops that do nothing for now - open and release.
v1 -> v2
* Add log pattern for NE.
* Update goto labels to match their purpose.
* Update ne_cpu_pool data structure to include the global mutex.
* Update NE misc device mode to 0660.
* Check if the CPU siblings are included in the NE CPU pool, as full CPU
cores are given for the enclave(s).
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20200921121732.44291-8-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In addition to the replies sent by the Nitro Enclaves PCI device in
response to command requests, out-of-band enclave events can happen e.g.
an enclave crashes. In this case, the Nitro Enclaves driver needs to be
aware of the event and notify the corresponding user space process that
abstracts the enclave.
Register an MSI-X interrupt vector to be used for this kind of
out-of-band events. The interrupt notifies that the state of an enclave
changed and the driver logic scans the state of each running enclave to
identify for which this notification is intended.
Create an workqueue to handle the out-of-band events. Notify user space
enclave process that is using a polling mechanism on the enclave fd.
Changelog
v9 -> v10
* Update commit message to include the changelog before the SoB tag(s).
v8 -> v9
* Use the reference to the pdev directly from the ne_pci_dev instead of
the one from the enclave data structure.
v7 -> v8
* No changes.
v6 -> v7
* No changes.
v5 -> v6
* Update documentation to kernel-doc format.
v4 -> v5
* Remove sanity checks for situations that shouldn't happen, only if
buggy system or broken logic at all.
v3 -> v4
* Use dev_err instead of custom NE log pattern.
* Return IRQ_NONE when interrupts are not handled.
v2 -> v3
* Remove the WARN_ON calls.
* Update static calls sanity checks.
* Remove "ratelimited" from the logs that are not in the ioctl call
paths.
v1 -> v2
* Add log pattern for NE.
* Update goto labels to match their purpose.
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Alexandru-Catalin Vasile <lexnv@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20200921121732.44291-7-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Nitro Enclaves PCI device exposes a MMIO space that this driver
uses to submit command requests and to receive command replies e.g. for
enclave creation / termination or setting enclave resources.
Add logic for handling PCI device command requests based on the given
command type.
Register an MSI-X interrupt vector for command reply notifications to
handle this type of communication events.
Changelog
v9 -> v10
* Update commit message to include the changelog before the SoB tag(s).
v8 -> v9
* No changes.
v7 -> v8
* Update function signature for submit request and retrive reply
functions as they only returned 0, no error code.
* Include command type value in the error logs of ne_do_request().
v6 -> v7
* No changes.
v5 -> v6
* Update documentation to kernel-doc format.
v4 -> v5
* Remove sanity checks for situations that shouldn't happen, only if
buggy system or broken logic at all.
v3 -> v4
* Use dev_err instead of custom NE log pattern.
* Return IRQ_NONE when interrupts are not handled.
v2 -> v3
* Remove the WARN_ON calls.
* Update static calls sanity checks.
* Remove "ratelimited" from the logs that are not in the ioctl call
paths.
v1 -> v2
* Add log pattern for NE.
* Remove the BUG_ON calls.
* Update goto labels to match their purpose.
* Add fix for kbuild report:
https://lore.kernel.org/lkml/202004231644.xTmN4Z1z%25lkp@intel.com/
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Alexandru-Catalin Vasile <lexnv@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20200921121732.44291-6-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Nitro Enclaves PCI device is used by the kernel driver as a means of
communication with the hypervisor on the host where the primary VM and
the enclaves run. It handles requests with regard to enclave lifetime.
Setup the PCI device driver and add support for MSI-X interrupts.
Changelog
v9 -> v10
* Update commit message to include the changelog before the SoB tag(s).
v8 -> v9
* Init the reference to the ne_pci_dev in the ne_devs data structure.
v7 -> v8
* Add NE PCI driver shutdown logic.
v6 -> v7
* No changes.
v5 -> v6
* Update documentation to kernel-doc format.
v4 -> v5
* Remove sanity checks for situations that shouldn't happen, only if
buggy system or broken logic at all.
v3 -> v4
* Use dev_err instead of custom NE log pattern.
* Update NE PCI driver name to "nitro_enclaves".
v2 -> v3
* Remove the GPL additional wording as SPDX-License-Identifier is
already in place.
* Remove the WARN_ON calls.
* Remove linux/bug include that is not needed.
* Update static calls sanity checks.
* Remove "ratelimited" from the logs that are not in the ioctl call
paths.
* Update kzfree() calls to kfree().
v1 -> v2
* Add log pattern for NE.
* Update PCI device setup functions to receive PCI device data structure and
then get private data from it inside the functions logic.
* Remove the BUG_ON calls.
* Add teardown function for MSI-X setup.
* Update goto labels to match their purpose.
* Implement TODO for NE PCI device disable state check.
* Update function name for NE PCI device probe / remove.
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Alexandru-Catalin Vasile <lexnv@amazon.com>
Signed-off-by: Alexandru Ciobotaru <alcioa@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20200921121732.44291-5-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Nitro Enclaves driver keeps an internal info per each enclave.
This is needed to be able to manage enclave resources state, enclave
notifications and have a reference of the PCI device that handles
command requests for enclave lifetime management.
Changelog
v9 -> v10
* Update commit message to include the changelog before the SoB tag(s).
v8 -> v9
* Add data structure to keep references to both Nitro Enclaves misc and
PCI devices.
v7 -> v8
* No changes.
v6 -> v7
* Update the naming and add more comments to make more clear the logic
of handling full CPU cores and dedicating them to the enclave.
v5 -> v6
* Update documentation to kernel-doc format.
* Include in the enclave memory region data structure the user space
address and size for duplicate user space memory regions checks.
v4 -> v5
* Include enclave cores field in the enclave metadata.
* Update the vCPU ids data structure to be a cpumask instead of a list.
v3 -> v4
* Add NUMA node field for an enclave metadata as the enclave memory and
CPUs need to be from the same NUMA node.
v2 -> v3
* Remove the GPL additional wording as SPDX-License-Identifier is
already in place.
v1 -> v2
* Add enclave memory regions and vcpus count for enclave bookkeeping.
* Update ne_state comments to reflect NE_START_ENCLAVE ioctl naming
update.
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Alexandru-Catalin Vasile <lexnv@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20200921121732.44291-4-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Nitro Enclaves (NE) driver communicates with a new PCI device, that
is exposed to a virtual machine (VM) and handles commands meant for
handling enclaves lifetime e.g. creation, termination, setting memory
regions. The communication with the PCI device is handled using a MMIO
space and MSI-X interrupts.
This device communicates with the hypervisor on the host, where the VM
that spawned the enclave itself runs, e.g. to launch a VM that is used
for the enclave.
Define the MMIO space of the NE PCI device, the commands that are
provided by this device. Add an internal data structure used as private
data for the PCI device driver and the function for the PCI device
command requests handling.
Changelog
v9 -> v10
* Update commit message to include the changelog before the SoB tag(s).
v8 -> v9
* Fix indent for the NE PCI device command types enum.
v7 -> v8
* No changes.
v6 -> v7
* Update the documentation to include references to the NE PCI device id
and MMIO bar.
v5 -> v6
* Update documentation to kernel-doc format.
v4 -> v5
* Add a TODO for including flags in the request to the NE PCI device to
set a memory region for an enclave. It is not used for now.
v3 -> v4
* Remove the "packed" attribute and include padding in the NE data
structures.
v2 -> v3
* Remove the GPL additional wording as SPDX-License-Identifier is
already in place.
v1 -> v2
* Update path naming to drivers/virt/nitro_enclaves.
* Update NE_ENABLE_OFF / NE_ENABLE_ON defines.
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Alexandru-Catalin Vasile <lexnv@amazon.com>
Signed-off-by: Alexandru Ciobotaru <alcioa@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20200921121732.44291-3-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
