Commit graph

443 commits

Author SHA1 Message Date
Atul Kumar Pant
b1a0f64cc6 audit: move trailing statements to next line
Fixes following checkpatch.pl issue:
ERROR: trailing statements should be on next line

Signed-off-by: Atul Kumar Pant <atulpant.linux@gmail.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
2023-08-15 18:16:14 -04:00
Xiu Jianfeng
be4187faa8 audit: include security.h unconditionally
The ifdef-else logic is already in the header file, so include it
unconditionally, no functional changes here.

Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
[PM: fixed misspelling in the subject]
Signed-off-by: Paul Moore <paul@paul-moore.com>
2023-07-20 15:06:58 -04:00
wuchi
501e4bb102 audit: use time_after to compare time
Using time_{*} macro to compare time is better

Signed-off-by: wuchi <wuchi.zero@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2022-08-29 19:47:03 -04:00
Xiu Jianfeng
546093206b audit: make is_audit_feature_set() static
Currently nobody use is_audit_feature_set() outside this file, so make
it static.

Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2022-06-13 14:08:57 -04:00
Shreenidhi Shedi
5ee6cfdd11 audit: remove redundant data_len check
data_len is already getting checked if it's less than 2 earlier in this
function.

Signed-off-by: Shreenidhi Shedi <sshedi@vmware.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2022-06-07 15:41:34 -04:00
Paul Moore
f26d043313 audit: improve audit queue handling when "audit=1" on cmdline
When an admin enables audit at early boot via the "audit=1" kernel
command line the audit queue behavior is slightly different; the
audit subsystem goes to greater lengths to avoid dropping records,
which unfortunately can result in problems when the audit daemon is
forcibly stopped for an extended period of time.

This patch makes a number of changes designed to improve the audit
queuing behavior so that leaving the audit daemon in a stopped state
for an extended period does not cause a significant impact to the
system.

- kauditd_send_queue() is now limited to looping through the
  passed queue only once per call.  This not only prevents the
  function from looping indefinitely when records are returned
  to the current queue, it also allows any recovery handling in
  kauditd_thread() to take place when kauditd_send_queue()
  returns.

- Transient netlink send errors seen as -EAGAIN now cause the
  record to be returned to the retry queue instead of going to
  the hold queue.  The intention of the hold queue is to store,
  perhaps for an extended period of time, the events which led
  up to the audit daemon going offline.  The retry queue remains
  a temporary queue intended to protect against transient issues
  between the kernel and the audit daemon.

- The retry queue is now limited by the audit_backlog_limit
  setting, the same as the other queues.  This allows admins
  to bound the size of all of the audit queues on the system.

- kauditd_rehold_skb() now returns records to the end of the
  hold queue to ensure ordering is preserved in the face of
  recent changes to kauditd_send_queue().

Cc: stable@vger.kernel.org
Fixes: 5b52330bbf ("audit: fix auditd/kernel connection state tracking")
Fixes: f4b3ee3c85 ("audit: improve robustness of the audit queue handling")
Reported-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Tested-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2022-01-25 13:22:51 -05:00
Linus Torvalds
5d7e52237c audit/stable-5.17 PR 20220110
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmHceicUHHBhdWxAcGF1
 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXO6GxAApAREftcLXl3mpn2vmqmEw3/kUeXt
 0OPTUU9vb/eJCFAcWV3RpMMH5ThUC+yVS6is2XX0+Bekj5xgUWsfsriH61JAqEN9
 juWuApWDuwdceSJTUzaz1JXgRMYbkBbkOyvSnIQWLTUQ/mrvx/g3K1SJWBss/ftN
 ngYeB2V1E7XHofRW4pi5W2ZXb7Lcb0OPSY3prVjaeVivg/GKeW5gogoOAQ1D4JLu
 NFwmeH0GD1dNUnonfDzNMzQWbWZ+DUE/g0PKwdaVfEOq3bU3Y2DDTwnOvwpqjT2B
 EsWJxp49ArpR+OyiJGRfcMB/TpuvPaljZviGaJrpgh/EiVxTDHOzH3MTsRpdVcmk
 MxzN7TT47zFzf2LzVrgcsK6RjlGXiieqFdYLD1VjXfwJboKALSwBE9Mb/3120xxV
 NINfaaAN3ow8c2jwnfL/WwePK5JBr62d/xwv2O+8WrydoEmC9E1veM+l5zLN3cdC
 Y5Wm6JJbVYaydG+6MROr0yPHn9IuUSnUrybpryv/Cez3VM1k6hCpmqJn5SXqYGEu
 3sXQi42sPBUU4gfSct8EhnPBNeFyLWGO/7BvaLWWXl09RMvfRyZtExtfNThBosSc
 C8WTCicCB3yuQweehaKVzBFAuuE7hdGgdkxh7B50uFbAgGHgViXtAa2WBcemwwwM
 wWOG8HOJJPh/DjY=
 =kz+D
 -----END PGP SIGNATURE-----

Merge tag 'audit-pr-20220110' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit

Pull audit updates from Paul Moore:
 "Four audit patches for v5.17:

   - Harden the code through additional use of the struct_size() macro
     and zero-length arrays to flexible-array conversions.

   - Ensure that processes which generate userspace audit records are
     not exempt from the kernel's audit throttling when the audit queues
     are being overrun"

* tag 'audit-pr-20220110' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: replace zero-length array with flexible-array member
  audit: use struct_size() helper in audit_[send|make]_reply()
  audit: ensure userspace is penalized the same as the kernel when under pressure
  audit: use struct_size() helper in kmalloc()
2022-01-11 13:08:21 -08:00
Linus Torvalds
a135ce4400 selinux/stable-5.17 PR 20220110
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmHcekAUHHBhdWxAcGF1
 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXNMAQ//TlHhQPEkPYZwD0EPXQIkl5IxGZfR
 DSg24OMzrh+x/jKVYhMXuW6BlnF10wd2ocG0DNAt9weF22PLrbDsxbzAAnv+MLXM
 wCzWLmgKpPpbaG57oa17LMcswDjVr8YbxXPOvyZJ/G3YsWDarH8Ezot8iNlVUkOh
 oqjjXTy0dyLUB/FsW7sIGWa3O18SkbI4pDQxL2vcpdDbvPtAY94kNG3bKTONK/kn
 OxLrjKscTtu6EuSdFhMqwcUxpfqvqUDrEfiSdNruMlT0/DixHgFlJA8WHXjn7Wpq
 XTbqdFrClfpmIiTrPSSszLrZAceegTdefDAf5wgfTxmcfYKiPDF9kPu5UPX1rAgO
 hSoXvGvPjez+RzyXmv9S292lkhV4tz/Wg0YlxZ0LUWif/CSZEyeGGoFZs8080Ukl
 1C/oNrByriaGGRLVwKNGOg5x/UkP1ipnorNnAiiIhw+xkzfXm12RdisUyUgLh9+w
 WsfsC9BJkXMpuvfkgya5PJ677wVNou4ZtJX+2MV8CfGEKTAJp/X/HKh3tWkQFYKx
 35QLVO1LD6gJZlSZZTsjZDxUyPwSd8e55GSFn1qKIHuC2jKjSkwCE7JfErIrI/W0
 js6HKO2ak7oMTWjxRizANyKI/yva/DeMl+mKCC4QV0xmwlm5JsOe7mYSCNGws7AV
 A2qYX7S1xKbLTGI=
 =8H+p
 -----END PGP SIGNATURE-----

Merge tag 'selinux-pr-20220110' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux

Pull selinux updates from Paul Moore:
 "Nothing too significant, but five SELinux patches for v5.17 that do
  the following:

   - Harden the code through additional use of the struct_size() macro

   - Plug some memory leaks

   - Clean up the code via removal of the security_add_mnt_opt() LSM
     hook and minor tweaks to selinux_add_opt()

   - Rename security_task_getsecid_subj() to better reflect its actual
     behavior/use - now called security_current_getsecid_subj()"

* tag 'selinux-pr-20220110' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: minor tweaks to selinux_add_opt()
  selinux: fix potential memleak in selinux_add_opt()
  security,selinux: remove security_add_mnt_opt()
  selinux: Use struct_size() helper in kmalloc()
  lsm: security_task_getsecid_subj() -> security_current_getsecid_subj()
2022-01-11 13:03:06 -08:00
Xiu Jianfeng
30561b51cc audit: use struct_size() helper in audit_[send|make]_reply()
Make use of struct_size() helper instead of an open-coded calculation.

Link: https://github.com/KSPP/linux/issues/160
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-12-20 14:42:11 -05:00
Paul Moore
f4b3ee3c85 audit: improve robustness of the audit queue handling
If the audit daemon were ever to get stuck in a stopped state the
kernel's kauditd_thread() could get blocked attempting to send audit
records to the userspace audit daemon.  With the kernel thread
blocked it is possible that the audit queue could grow unbounded as
certain audit record generating events must be exempt from the queue
limits else the system enter a deadlock state.

This patch resolves this problem by lowering the kernel thread's
socket sending timeout from MAX_SCHEDULE_TIMEOUT to HZ/10 and tweaks
the kauditd_send_queue() function to better manage the various audit
queues when connection problems occur between the kernel and the
audit daemon.  With this patch, the backlog may temporarily grow
beyond the defined limits when the audit daemon is stopped and the
system is under heavy audit pressure, but kauditd_thread() will
continue to make progress and drain the queues as it would for other
connection problems.  For example, with the audit daemon put into a
stopped state and the system configured to audit every syscall it
was still possible to shutdown the system without a kernel panic,
deadlock, etc.; granted, the system was slow to shutdown but that is
to be expected given the extreme pressure of recording every syscall.

The timeout value of HZ/10 was chosen primarily through
experimentation and this developer's "gut feeling".  There is likely
no one perfect value, but as this scenario is limited in scope (root
privileges would be needed to send SIGSTOP to the audit daemon), it
is likely not worth exposing this as a tunable at present.  This can
always be done at a later date if it proves necessary.

Cc: stable@vger.kernel.org
Fixes: 5b52330bbf ("audit: fix auditd/kernel connection state tracking")
Reported-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Tested-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-12-15 13:16:39 -05:00
Paul Moore
8f110f5306 audit: ensure userspace is penalized the same as the kernel when under pressure
Due to the audit control mutex necessary for serializing audit
userspace messages we haven't been able to block/penalize userspace
processes that attempt to send audit records while the system is
under audit pressure.  The result is that privileged userspace
applications have a priority boost with respect to audit as they are
not bound by the same audit queue throttling as the other tasks on
the system.

This patch attempts to restore some balance to the system when under
audit pressure by blocking these privileged userspace tasks after
they have finished their audit processing, and dropped the audit
control mutex, but before they return to userspace.

Reported-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Tested-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-12-15 13:10:32 -05:00
Xiu Jianfeng
bc6e60a4fc audit: use struct_size() helper in kmalloc()
Make use of struct_size() helper instead of an open-coded calucation.

Link: https://github.com/KSPP/linux/issues/160
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-12-14 17:39:42 -05:00
Paul Moore
6326948f94 lsm: security_task_getsecid_subj() -> security_current_getsecid_subj()
The security_task_getsecid_subj() LSM hook invites misuse by allowing
callers to specify a task even though the hook is only safe when the
current task is referenced.  Fix this by removing the task_struct
argument to the hook, requiring LSM implementations to use the
current task.  While we are changing the hook declaration we also
rename the function to security_current_getsecid_subj() in an effort
to reinforce that the hook captures the subjective credentials of the
current task and not an arbitrary task on the system.

Reviewed-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-11-22 17:52:47 -05:00
Paul Moore
4ebd7651bf lsm: separate security_task_getsecid() into subjective and objective variants
Of the three LSMs that implement the security_task_getsecid() LSM
hook, all three LSMs provide the task's objective security
credentials.  This turns out to be unfortunate as most of the hook's
callers seem to expect the task's subjective credentials, although
a small handful of callers do correctly expect the objective
credentials.

This patch is the first step towards fixing the problem: it splits
the existing security_task_getsecid() hook into two variants, one
for the subjective creds, one for the objective creds.

  void security_task_getsecid_subj(struct task_struct *p,
				   u32 *secid);
  void security_task_getsecid_obj(struct task_struct *p,
				  u32 *secid);

While this patch does fix all of the callers to use the correct
variant, in order to keep this patch focused on the callers and to
ease review, the LSMs continue to use the same implementation for
both hooks.  The net effect is that this patch should not change
the behavior of the kernel in any way, it will be up to the latter
LSM specific patches in this series to change the hook
implementations and return the correct credentials.

Acked-by: Mimi Zohar <zohar@linux.ibm.com> (IMA)
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-03-22 15:23:32 -04:00
Davidlohr Bueso
c1de44631e audit: Remove leftover reference to the audit_tasklet
This was replaced with a kauditd_wait kthread long ago,
back in:

     b7d1125817 (AUDIT: Send netlink messages from a separate kernel thread)

Update the stale comment.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-01-15 11:58:10 -05:00
Zheng Yongjun
a1b861faa6 kernel/audit: convert comma to semicolon
Replace a comma between expression statements by a semicolon.

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-01-04 19:37:35 -05:00
Yejune Deng
6b3211842a audit: replace atomic_add_return()
atomic_inc_return() is a little neater

Signed-off-by: Yejune Deng <yejune.deng@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-12-02 22:52:16 -05:00
Alex Shi
ba59eae723 audit: fix macros warnings
Some unused macros could cause gcc warning:
kernel/audit.c:68:0: warning: macro "AUDIT_UNINITIALIZED" is not used
[-Wunused-macros]
kernel/auditsc.c:104:0: warning: macro "AUDIT_AUX_IPCPERM" is not used
[-Wunused-macros]
kernel/auditsc.c:82:0: warning: macro "AUDITSC_INVALID" is not used
[-Wunused-macros]

AUDIT_UNINITIALIZED and AUDITSC_INVALID are still meaningful and should
be in incorporated.

Just remove AUDIT_AUX_IPCPERM.

Thanks comments from Richard Guy Briggs and Paul Moore.

Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Richard Guy Briggs <rgb@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: linux-audit@redhat.com
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-11-24 23:28:02 -05:00
Richard Guy Briggs
6d915476e6 audit: trigger accompanying records when no rules present
When there are no audit rules registered, mandatory records (config,
etc.) are missing their accompanying records (syscall, proctitle, etc.).

This is due to audit context dummy set on syscall entry based on absence
of rules that signals that no other records are to be printed.  Clear the dummy
bit if any record is generated, open coding this in audit_log_start().

The proctitle context and dummy checks are pointless since the
proctitle record will not be printed if no syscall records are printed.

The fds array is reset to -1 after the first syscall to indicate it
isn't valid any more, but was never set to -1 when the context was
allocated to indicate it wasn't yet valid.

Check ctx->pwd in audit_log_name().

The audit_inode* functions can be called without going through
getname_flags() or getname_kernel() that sets audit_names and cwd, so
set the cwd in audit_alloc_name() if it has not already been done so due to
audit_names being valid and purge all other audit_getcwd() calls.

Revert the LSM dump_common_audit_data() LSM_AUDIT_DATA_* cases from the
ghak96 patch since they are no longer necessary due to cwd coverage in
audit_alloc_name().

Thanks to bauen1 <j2468h@googlemail.com> for reporting LSM situations in
which context->cwd is not valid, inadvertantly fixed by the ghak96 patch.

Please see upstream github issue
https://github.com/linux-audit/audit-kernel/issues/120
This is also related to upstream github issue
https://github.com/linux-audit/audit-kernel/issues/96

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-10-27 21:02:57 -04:00
Mauro Carvalho Chehab
cbb5262192 audit: fix a kernel-doc markup
typo:
	kauditd_print_skb -> kauditd_printk_skb

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-10-27 21:02:54 -04:00
Xu Wang
c072035164 audit: Remove redundant null check
Because kfree_skb already checked NULL skb parameter,
so the additional check is unnecessary, just remove it.

Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-08-26 09:10:39 -04:00
Jules Irenge
265c32072b audit: uninitialize variable audit_sig_sid
Checkpatch tool reports

"ERROR: do not initialise globals/statics to 0"

To fix this, audit_sig_sid is uninitialized
As this is stored in the .bss section,
the compiler can initialize the variable automatically.

Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-08-17 20:28:17 -04:00
Jules Irenge
6b87024f76 audit: change unnecessary globals into statics
Variables sig_pid, audit_sig_uid and audit_sig_sid
are only used in the audit.c file across the kernel
Hence it appears no reason for declaring them as globals
This patch removes their global declarations from the .h file
and change them into static in the .c file.

Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-08-17 20:26:58 -04:00
Linus Torvalds
fd76a74d94 audit/stable-5.9 PR 20200803
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAl8okpIUHHBhdWxAcGF1
 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXNqOQ/8D+m9Ykcby3csEKsp8YtsaukEu62U
 lRVaxzRNO9wwB24aFwDFuJnIkmsSi/s/O4nBsy2mw+Apn+uDCvHQ9tBU07vlNn2f
 lu27YaTya7YGlqoe315xijd8tyoX99k8cpQeixvAVr9/jdR09yka7SJ8O7X9mjV7
 +SUVDiKCplPKpiwCCRS9cqD7F64T6y35XKzbrzYqdP0UOF2XelZo/Evt5rDRvWUf
 5qDN2tP+iM/Fvu5lCfczFwAeivfAdxjQ11n783hx8Ms2qyiaKQCzbEwjqAslmkbs
 1k/+ED0NjzXX1ne0JZaz/bk0wsMnmOoa8o+NDcyd7Za/cj5prUZi7kBy+xry4YV8
 qKJ40Lk0flCWgUpm6bkYVOByIYHk0gmfBNvjilqf25NR/eOC/9e9ir8PywvYUW/7
 kvVK37+N/a3LnFj80sZpIeqqnNU8z9PV1i7//5/kDuKvz94Bq83TJDO6pPKvqDtC
 njQfCFoHwdEeF8OalK793lIiYaoODqvbkWKChKMqziODJ4ZP8AW06gXpEbEWn7G3
 TTnJx7hqzR9t90vBQJeO3Fromfn+9TDlZVdX+EGO8gIqUiLGr0r7LPPep4VkDbNw
 LxMYKeC2cgRp8Z+XXPDxfXSDL2psTwg6CXcDrXcYnUyBo/yerpBvbJkeaR0h+UR0
 j6cvMX+T39X2JXM=
 =Xs3M
 -----END PGP SIGNATURE-----

Merge tag 'audit-pr-20200803' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit

Pull audit updates from Paul Moore:
 "Aside from some smaller bug fixes, here are the highlights:

   - add a new backlog wait metric to the audit status message, this is
     intended to help admins determine how long processes have been
     waiting for the audit backlog queue to clear

   - generate audit records for nftables configuration changes

   - generate CWD audit records for for the relevant LSM audit records"

* tag 'audit-pr-20200803' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: report audit wait metric in audit status reply
  audit: purge audit_log_string from the intra-kernel audit API
  audit: issue CWD record to accompany LSM_AUDIT_DATA_* records
  audit: use the proper gfp flags in the audit_log_nfcfg() calls
  audit: remove unused !CONFIG_AUDITSYSCALL __audit_inode* stubs
  audit: add gfp parameter to audit_log_nfcfg
  audit: log nftables configuration change events
  audit: Use struct_size() helper in alloc_chunk
2020-08-04 14:20:26 -07:00
Linus Torvalds
99ea1521a0 Remove uninitialized_var() macro for v5.9-rc1
- Clean up non-trivial uses of uninitialized_var()
 - Update documentation and checkpatch for uninitialized_var() removal
 - Treewide removal of uninitialized_var()
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAl8oYLQWHGtlZXNjb29r
 QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJsfjEACvf0D3WL3H7sLHtZ2HeMwOgAzq
 il08t6vUscINQwiIIK3Be43ok3uQ1Q+bj8sr2gSYTwunV2IYHFferzgzhyMMno3o
 XBIGd1E+v1E4DGBOiRXJvacBivKrfvrdZ7AWiGlVBKfg2E0fL1aQbe9AYJ6eJSbp
 UGqkBkE207dugS5SQcwrlk1tWKUL089lhDAPd7iy/5RK76OsLRCJFzIerLHF2ZK2
 BwvA+NWXVQI6pNZ0aRtEtbbxwEU4X+2J/uaXH5kJDszMwRrgBT2qoedVu5LXFPi8
 +B84IzM2lii1HAFbrFlRyL/EMueVFzieN40EOB6O8wt60Y4iCy5wOUzAdZwFuSTI
 h0xT3JI8BWtpB3W+ryas9cl9GoOHHtPA8dShuV+Y+Q2bWe1Fs6kTl2Z4m4zKq56z
 63wQCdveFOkqiCLZb8s6FhnS11wKtAX4czvXRXaUPgdVQS1Ibyba851CRHIEY+9I
 AbtogoPN8FXzLsJn7pIxHR4ADz+eZ0dQ18f2hhQpP6/co65bYizNP5H3h+t9hGHG
 k3r2k8T+jpFPaddpZMvRvIVD8O2HvJZQTyY6Vvneuv6pnQWtr2DqPFn2YooRnzoa
 dbBMtpon+vYz6OWokC5QNWLqHWqvY9TmMfcVFUXE4AFse8vh4wJ8jJCNOFVp8On+
 drhmmImUr1YylrtVOw==
 =xHmk
 -----END PGP SIGNATURE-----

Merge tag 'uninit-macro-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull uninitialized_var() macro removal from Kees Cook:
 "This is long overdue, and has hidden too many bugs over the years. The
  series has several "by hand" fixes, and then a trivial treewide
  replacement.

   - Clean up non-trivial uses of uninitialized_var()

   - Update documentation and checkpatch for uninitialized_var() removal

   - Treewide removal of uninitialized_var()"

* tag 'uninit-macro-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  compiler: Remove uninitialized_var() macro
  treewide: Remove uninitialized_var() usage
  checkpatch: Remove awareness of uninitialized_var() macro
  mm/debug_vm_pgtable: Remove uninitialized_var() usage
  f2fs: Eliminate usage of uninitialized_var() macro
  media: sur40: Remove uninitialized_var() usage
  KVM: PPC: Book3S PR: Remove uninitialized_var() usage
  clk: spear: Remove uninitialized_var() usage
  clk: st: Remove uninitialized_var() usage
  spi: davinci: Remove uninitialized_var() usage
  ide: Remove uninitialized_var() usage
  rtlwifi: rtl8192cu: Remove uninitialized_var() usage
  b43: Remove uninitialized_var() usage
  drbd: Remove uninitialized_var() usage
  x86/mm/numa: Remove uninitialized_var() usage
  docs: deprecated.rst: Add uninitialized_var()
2020-08-04 13:49:43 -07:00
Linus Torvalds
d3590ebf6f audit/stable-5.8 PR 20200729
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAl8hgm0UHHBhdWxAcGF1
 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXPc4xAAxWSkLThFbdC+dWA8cFQvyJhXdcl6
 C3ALyBnx2hyr/MxJ9OcfYDl8TMafKFkXzq4+2vLiZPl/UBSpnr47ralUHl+aAh+I
 cZdV9bF3aSlsb4mIEg3H03xkPBCWfTR+UMzdrYAgqxyeYoZ/VteR1O3yWi80caQK
 vh2UlbuPyiEsz1A21ems88dDw28RkzETNFmBARSh7cPrvGorQNJKYGkMNqsVpUbb
 elx+DCSh4J+QYqByeQUY64L1n7jHGQkTpdZaVA7FhBeAilelL6PIa4qpyHU28VGg
 ZzOWJBkZwYz1lVEhHu1h3Jzv9dwTzzyopJ/YpPZUsvZ+GPuIfYmY+C1InkMvGd4S
 Ytj9WO+rNpvJR8EWUhl1O7J/0HN+dy3MGst9MkJOMea0gsgf9cTgnIEohFawYZRt
 t1pKB2VximglOx2IRVK/2//8u/s8d7c5/5uVY4akS++tbrk5j8uPcO+4wIf/njMM
 WqfUT58M6oY9mQkErewNrZEi2CHBg71GT4hJQ+1qnyrTSe9WfrmA01m/pIUNHzu3
 j1hhZH2KCT5IKF4b5dA2DmssorfVgC1VnAoa0UM9jC+awqSYI83S20d8EF48msIW
 XqEUSURh/bfn3T9Y75YVsNJ6EOvrhsf9TSCb43oNhAXBv0+XgO3bKOpBB6W+UIZ7
 86vGfemi82Rt+Sk=
 =zLU9
 -----END PGP SIGNATURE-----

Merge tag 'audit-pr-20200729' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit

Pull audit fixes from Paul Moore:
 "One small audit fix that you can hopefully merge before v5.8 is
  released. Unfortunately it is a revert of a patch that went in during
  the v5.7 window and we just recently started to see some bug reports
  relating to that commit.

  We are working on a proper fix, but I'm not yet clear on when that
  will be ready and we need to fix the v5.7 kernels anyway, so in the
  interest of time a revert seemed like the best solution right now"

* tag 'audit-pr-20200729' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  revert: 1320a4052e ("audit: trigger accompanying records when no rules present")
2020-07-29 12:35:36 -07:00
Paul Moore
8ac68dc455 revert: 1320a4052e ("audit: trigger accompanying records when no rules present")
Unfortunately the commit listed in the subject line above failed
to ensure that the task's audit_context was properly initialized/set
before enabling the "accompanying records".  Depending on the
situation, the resulting audit_context could have invalid values in
some of it's fields which could cause a kernel panic/oops when the
task/syscall exists and the audit records are generated.

We will revisit the original patch, with the necessary fixes, in a
future kernel but right now we just want to fix the kernel panic
with the least amount of added risk.

Cc: stable@vger.kernel.org
Fixes: 1320a4052e ("audit: trigger accompanying records when no rules present")
Reported-by: j2468h@googlemail.com
Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-07-29 10:00:36 -04:00
Max Englander
b43870c74f audit: report audit wait metric in audit status reply
In environments where the preservation of audit events and predictable
usage of system memory are prioritized, admins may use a combination of
--backlog_wait_time and -b options at the risk of degraded performance
resulting from backlog waiting. In some cases, this risk may be
preferred to lost events or unbounded memory usage. Ideally, this risk
can be mitigated by making adjustments when backlog waiting is detected.

However, detection can be difficult using the currently available
metrics. For example, an admin attempting to debug degraded performance
may falsely believe a full backlog indicates backlog waiting. It may
turn out the backlog frequently fills up but drains quickly.

To make it easier to reliably track degraded performance to backlog
waiting, this patch makes the following changes:

Add a new field backlog_wait_time_total to the audit status reply.
Initialize this field to zero. Add to this field the total time spent
by the current task on scheduled timeouts while the backlog limit is
exceeded. Reset field to zero upon request via AUDIT_SET.

Tested on Ubuntu 18.04 using complementary changes to the
audit-userspace and audit-testsuite:
- https://github.com/linux-audit/audit-userspace/pull/134
- https://github.com/linux-audit/audit-testsuite/pull/97

Signed-off-by: Max Englander <max.englander@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-07-21 11:21:44 -04:00
Richard Guy Briggs
f1d9b23cab audit: purge audit_log_string from the intra-kernel audit API
audit_log_string() was inteded to be an internal audit function and
since there are only two internal uses, remove them.  Purge all external
uses of it by restructuring code to use an existing audit_log_format()
or using audit_log_format().

Please see the upstream issue
https://github.com/linux-audit/audit-kernel/issues/84

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-07-21 11:12:31 -04:00
Kees Cook
3f649ab728 treewide: Remove uninitialized_var() usage
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.

In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:

git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \
	xargs perl -pi -e \
		's/\buninitialized_var\(([^\)]+)\)/\1/g;
		 s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;'

drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.

No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.

[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/

Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5
Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB
Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers
Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-16 12:35:15 -07:00
Linus Torvalds
9d99b1647f audit/stable-5.8 PR 20200601
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAl7VnKEUHHBhdWxAcGF1
 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXMbHA/+PQmrPdzPvkLAjjf1y3LXvyEIAXIQ
 h2r8SxHa7iGyF6vVPz+ya7ux0KAm8wCVdfkokWG5jxjwK7pysS6gx9JzBVK7dbhD
 FsKBSoq9+to9fYlaCyX7vn85C7kK5oGrwS/ECos0BHBpij8ukLgvPQu+PDs7d4xW
 1X2Nrgqnc7M4L8ayzXTQX0fDWcOkapzaN86+R+Lavb4hO/FownaYbuCFn+1mdzux
 ZNBpt3/y1pM6vi5YBkI1rkauBCmkl/YSX/mf/EwDNlQ0XmcadGQ6z7iwjyiE826g
 etCHWD3cgQH7Zzz6CxBNX8Xbq0nIQueHHiFYpVyy9lf4xleFvnfFDebrs8Q9TB6G
 jTWU8okioUKPZyRDaRuIAmCf/LBQRsMkIYTU3w6J0ZqsBycTw3NXPiQArmlxZESM
 HquxWpKoZytRiw581hiSGKNqY+R3FvA+Jroc/7bWfNOE3IdFxegvCsC3giKJf1rY
 AlQitehql9a5jp7A57+477WRYOygYRnd+ntMD5KqR90QSIcQXeg0/lFKhco+zc2p
 bXbWLE+aaOTGCeC+3Eow3T7FMWmrIn6ccKgM84+WT7YQYtRqUYu3RIZbnlYXN7uH
 8xGXT6ccPcEwIjgyF87J0KyGhrbT1N91Jd2jMJkEry9OLAn/yr+pUBQtAa456MMi
 JYevS4atZaUqgvw=
 =iLfC
 -----END PGP SIGNATURE-----

Merge tag 'audit-pr-20200601' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit

Pull audit updates from Paul Moore:
 "Summary of the significant patches:

   - Record information about binds/unbinds to the audit multicast
     socket. This helps identify which processes have/had access to the
     information in the audit stream.

   - Cleanup and add some additional information to the netfilter
     configuration events collected by audit.

   - Fix some of the audit error handling code so we don't leak network
     namespace references"

* tag 'audit-pr-20200601' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: add subj creds to NETFILTER_CFG record to
  audit: Replace zero-length array with flexible-array
  audit: make symbol 'audit_nfcfgs' static
  netfilter: add audit table unregister actions
  audit: tidy and extend netfilter_cfg x_tables
  audit: log audit netlink multicast bind and unbind
  audit: fix a net reference leak in audit_list_rules_send()
  audit: fix a net reference leak in audit_send_reply()
2020-06-02 17:13:37 -07:00
Richard Guy Briggs
9d2161bed4 audit: log audit netlink multicast bind and unbind
Log information about programs connecting to and disconnecting from the
audit netlink multicast socket. This is needed so that during
investigations a security officer can tell who or what had access to the
audit trail.  This helps to meet the FAU_SAR.2 requirement for Common
Criteria.

Here is the systemd startup event:
type=PROCTITLE msg=audit(2020-04-22 10:10:21.787:10) : proctitle=/init
type=SYSCALL msg=audit(2020-04-22 10:10:21.787:10) : arch=x86_64 syscall=bind success=yes exit=0 a0=0x19 a1=0x555f4aac7e90 a2=0xc a3=0x7ffcb792ff44 items=0 ppid=0 pid=1 auid=unset uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=root fsgid=root tty=(none) ses=unset comm=systemd exe=/usr/lib/systemd/systemd subj=kernel key=(null)
type=UNKNOWN[1335] msg=audit(2020-04-22 10:10:21.787:10) : pid=1 uid=root auid=unset tty=(none) ses=unset subj=kernel comm=systemd exe=/usr/lib/systemd/systemd nl-mcgrp=1 op=connect res=yes

And events from the test suite that just uses close():
type=PROCTITLE msg=audit(2020-04-22 11:47:08.501:442) : proctitle=/usr/bin/perl -w amcast_joinpart/test
type=SYSCALL msg=audit(2020-04-22 11:47:08.501:442) : arch=x86_64 syscall=bind success=yes exit=0 a0=0x7 a1=0x563004378760 a2=0xc a3=0x0 items=0 ppid=815 pid=818 auid=root uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=root fsgid=root tty=ttyS0 ses=1 comm=perl exe=/usr/bin/perl subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 key=(null)
type=UNKNOWN[1335] msg=audit(2020-04-22 11:47:08.501:442) : pid=818 uid=root auid=root tty=ttyS0 ses=1 subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 comm=perl exe=/usr/bin/perl nl-mcgrp=1 op=connect res=yes

type=UNKNOWN[1335] msg=audit(2020-04-22 11:47:08.501:443) : pid=818 uid=root auid=root tty=ttyS0 ses=1 subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 comm=perl exe=/usr/bin/perl nl-mcgrp=1 op=disconnect res=yes

And the events from the test suite using setsockopt with NETLINK_DROP_MEMBERSHIP:
type=PROCTITLE msg=audit(2020-04-22 11:39:53.291:439) : proctitle=/usr/bin/perl -w amcast_joinpart/test
type=SYSCALL msg=audit(2020-04-22 11:39:53.291:439) : arch=x86_64 syscall=bind success=yes exit=0 a0=0x7 a1=0x5560877c2d20 a2=0xc a3=0x0 items=0 ppid=772 pid=775 auid=root uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=root fsgid=root tty=ttyS0 ses=1 comm=perl exe=/usr/bin/perl subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 key=(null)
type=UNKNOWN[1335] msg=audit(2020-04-22 11:39:53.291:439) : pid=775 uid=root auid=root tty=ttyS0 ses=1 subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 comm=perl exe=/usr/bin/perl nl-mcgrp=1 op=connect res=yes

type=PROCTITLE msg=audit(2020-04-22 11:39:53.292:440) : proctitle=/usr/bin/perl -w amcast_joinpart/test
type=SYSCALL msg=audit(2020-04-22 11:39:53.292:440) : arch=x86_64 syscall=setsockopt success=yes exit=0 a0=0x7 a1=SOL_NETLINK a2=0x2 a3=0x7ffc8366f000 items=0 ppid=772 pid=775 auid=root uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=root fsgid=root tty=ttyS0 ses=1 comm=perl exe=/usr/bin/perl subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 key=(null)
type=UNKNOWN[1335] msg=audit(2020-04-22 11:39:53.292:440) : pid=775 uid=root auid=root tty=ttyS0 ses=1 subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 comm=perl exe=/usr/bin/perl nl-mcgrp=1 op=disconnect res=yes

Please see the upstream issue tracker at
  https://github.com/linux-audit/audit-kernel/issues/28
With the feature description at
  https://github.com/linux-audit/audit-kernel/wiki/RFE-Audit-Multicast-Socket-Join-Part
The testsuite support is at
  https://github.com/rgbriggs/audit-testsuite/compare/ghak28-mcast-part-join
  https://github.com/linux-audit/audit-testsuite/pull/93
And the userspace support patch is at
  https://github.com/linux-audit/audit-userspace/pull/114

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-04-27 18:49:31 -04:00
Paul Moore
3054d06719 audit: fix a net reference leak in audit_list_rules_send()
If audit_list_rules_send() fails when trying to create a new thread
to send the rules it also fails to cleanup properly, leaking a
reference to a net structure.  This patch fixes the error patch and
renames audit_send_list() to audit_send_list_thread() to better
match its cousin, audit_send_reply_thread().

Reported-by: teroincn@gmail.com
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-04-22 15:23:10 -04:00
Paul Moore
a48b284b40 audit: fix a net reference leak in audit_send_reply()
If audit_send_reply() fails when trying to create a new thread to
send the reply it also fails to cleanup properly, leaking a reference
to a net structure.  This patch fixes the error path and makes a
handful of other cleanups that came up while fixing the code.

Reported-by: teroincn@gmail.com
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-04-20 19:33:56 -04:00
Paul Moore
763dafc520 audit: check the length of userspace generated audit records
Commit 7561252892 ("audit: always check the netlink payload length
in audit_receive_msg()") fixed a number of missing message length
checks, but forgot to check the length of userspace generated audit
records.  The good news is that you need CAP_AUDIT_WRITE to submit
userspace audit records, which is generally only given to trusted
processes, so the impact should be limited.

Cc: stable@vger.kernel.org
Fixes: 7561252892 ("audit: always check the netlink payload length in audit_receive_msg()")
Reported-by: syzbot+49e69b4d71a420ceda3e@syzkaller.appspotmail.com
Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-04-20 17:10:58 -04:00
Linus Torvalds
674d85eb2d audit/stable-5.7 PR 20200330
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAl6CZbEUHHBhdWxAcGF1
 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXMbFA//Z1Z/lXhrt9GcWz1KrjZWhGn4Emv2
 kVPZpB+HhrGmPE6z1r7gHKTZIMxmUKapZJt+uwMO8Mdns16fD8LrhLc9NXqsFB7X
 tUq5YaePTHC1MMf2TGzuvsroMT0UXeMqNb043KBvAOjHijDL28KTCMSMz1biKHdY
 0Bj1U1f18YtnjdxsvGeBbHjjlhiGbZfXNq15dbIfR/fMKpN5p/3VHi57FN7otZbD
 jN1SniJfZLTXS2PKt/I8yL63aH3UY+81CqTbNsqXpSDzgqfVZOpsp5f5X7UfPH7+
 qF8Cs4iBDm/cykPWivoPgQ65T8kCmaxYiZ5b9cEHrw08FF7Iokn4cC6VbfMOksoM
 2tCQ59LdrZ6yAqox6jMF2a8JE4UJYGQjyhjfsAgmGgqgMdvZx+3Ac2umPG/YzuIa
 79CYVJBV+mdhogGWK6OMbGGOvl6bxMBCv1CmstCXQZQYy69SJGz21mnvkpWhwYoi
 d/TH0obqpVkQYvxXi+7ExmXY+7u6igytNGEdtQRjztUCMaXBH8X7s6B/jqmO8OcG
 UTdM2gcgNFshR2r/J7FdwYoQoxIb9CNCw2DkeX45NY52m8WZMMUHd7JAb3Zr5Ggf
 XCF62oazVBDvijBtFlX4gT4VHGZ9K99qO3IMcTOc8CQKWBSvYBcAOqzSs0Bu+jel
 xD9wSJHKUfKLUsQ=
 =xLho
 -----END PGP SIGNATURE-----

Merge tag 'audit-pr-20200330' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit

Pull audit updates from Paul Moore:
 "We've got two audit patches for the v5.7 merge window with a stellar
  14 lines changed between the two patches. The patch descriptions are
  far more lengthy than the patches themselves, which is a very good
  thing for patches this size IMHO. The patches pass our test suites and
  a quick summary is below:

   - Stop logging inode information when updating an audit file watch.

     Since we are not changing the inode, or the fact that we are
     watching the associated file, the inode information is just noise
     that we can do without.

   - Fix a problem where mandatory audit records were missing their
     accompanying audit records (e.g. SYSCALL records were missing).

     The missing records often meant that we didn't have the necessary
     context to understand what was going on when the event occurred"

* tag 'audit-pr-20200330' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: trigger accompanying records when no rules present
  audit: CONFIG_CHANGE don't log internal bookkeeping as an event
2020-03-31 15:04:17 -07:00
Richard Guy Briggs
1320a4052e audit: trigger accompanying records when no rules present
When there are no audit rules registered, mandatory records (config,
etc.) are missing their accompanying records (syscall, proctitle, etc.).

This is due to audit context dummy set on syscall entry based on absence
of rules that signals that no other records are to be printed.

Clear the dummy bit if any record is generated.

The proctitle context and dummy checks are pointless since the
proctitle record will not be printed if no syscall records are printed.

Please see upstream github issue
https://github.com/linux-audit/audit-kernel/issues/120

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-03-12 10:42:51 -04:00
Paul Moore
7561252892 audit: always check the netlink payload length in audit_receive_msg()
This patch ensures that we always check the netlink payload length
in audit_receive_msg() before we take any action on the payload
itself.

Cc: stable@vger.kernel.org
Reported-by: syzbot+399c44bf1f43b8747403@syzkaller.appspotmail.com
Reported-by: syzbot+e4b12d8d202701f08b6d@syzkaller.appspotmail.com
Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-02-24 16:38:57 -05:00
Amol Grover
cb5172d96d audit: Add __rcu annotation to RCU pointer
Add __rcu annotation to RCU-protected global pointer auditd_conn.

auditd_conn is an RCU-protected global pointer,i.e., accessed
via RCU methods rcu_dereference() and rcu_assign_pointer(),
hence it must be annotated with __rcu for sparse to report
warnings/errors correctly.

Fix multiple instances of the sparse error:
error: incompatible types in comparison expression
(different address spaces)

Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Amol Grover <frextrite@gmail.com>
[PM: tweak subject line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-12-09 15:19:03 -05:00
Yunfeng Ye
c34c78dfc1 audit: remove redundant condition check in kauditd_thread()
Warning is found by the code analysis tool:
  "the condition 'if(ac && rc < 0)' is redundant: ac"

The @ac variable has been checked before. It can't be a null pointer
here, so remove the redundant condition check.

Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-10-25 11:48:14 -04:00
Kees Cook
245d73698e audit: Report suspicious O_CREAT usage
This renames the very specific audit_log_link_denied() to
audit_log_path_denied() and adds the AUDIT_* type as an argument. This
allows for the creation of the new AUDIT_ANOM_CREAT that can be used to
report the fifo/regular file creation restrictions that were introduced
in commit 30aba6656f ("namei: allow restricted O_CREAT of FIFOs and
regular files").

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-10-03 13:59:29 -04:00
Linus Torvalds
61fc5771f5 audit/stable-5.3 PR 20190702
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAl0bgNYUHHBhdWxAcGF1
 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXONcRAAqpeGVh3/eU5bmGeiOWZJ5TREx0Qf
 4M8Z3CElxtbPF4nz1nARUbH424zF91AOa0B4JVO8BFCgxWN5M3dDOLjqLLfJkfbE
 mQMmiPoua1qXTMRi/9S+3kNFYO4IL/sFFiiqY6XVcW6xIUzp3rLwEjcHC/deszP7
 /e8IqLUFAqj853W0k7qyLMRFEQVBzrABgtiSX+X06sCB8OmAVxhpevSRR1lmmfEu
 sjwuAvxexVlmojwI6HkoANyRzqJRX6y7sMGSbr10I/T9YJTk4VPfeFwSS3qBsf15
 z9gTbvFrRcXKoA9U8iG45K0lUinka9OuGxJD/AxuJv+ncyJjWqX+aokvzeo7Wmv6
 sbAyD+ikl9kxvE+sZ3l9yZEVHjFIbjmZY/gzG+ZZD2EEwKBuaQBN5mmSjrUkySJk
 sbF+oBABLptitJIa/cZJ5QHeAPR1NBqSXKhnhG26IR8iwQqpZhefa8yXpF/x3Tn8
 FckvY+YpIakOAMQ/ezVvFaaEELieiRZqqI/ShrochJzwRXHnnbCTPRtNb9NyjOeU
 DZCBASPhrYfBJz3n0fZR2HCnpMZwCSGBgmVn3jmh3YyxKnILdQ4DxKgJCv730jwh
 9T1+1g2/MW554Gted7KLlkE+aj+BzORx6XJ9H8SKmYB85NF5KnnJMiVktjfl4Jr4
 A8meV9KGwAcyBOU=
 =8HBN
 -----END PGP SIGNATURE-----

Merge tag 'audit-pr-20190702' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit

Pull audit updates from Paul Moore:
 "This pull request is a bit early, but with some vacation time coming
  up I wanted to send this out now just in case the remote Internet Gods
  decide not to smile on me once the merge window opens. The patchset
  for v5.3 is pretty minor this time, the highlights include:

   - When the audit daemon is sent a signal, ensure we deliver
     information about the sender even when syscall auditing is not
     enabled/supported.

   - Add the ability to filter audit records based on network address
     family.

   - Tighten the audit field filtering restrictions on string based
     fields.

   - Cleanup the audit field filtering verification code.

   - Remove a few BUG() calls from the audit code"

* tag 'audit-pr-20190702' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: remove the BUG() calls in the audit rule comparison functions
  audit: enforce op for string fields
  audit: add saddr_fam filter field
  audit: re-structure audit field valid checks
  audit: deliver signal_info regarless of syscall
2019-07-08 18:55:42 -07:00
Thomas Gleixner
1a59d1b8e0 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not write to the free software foundation inc
  59 temple place suite 330 boston ma 02111 1307 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1334 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:35 -07:00
Richard Guy Briggs
b48345aafb audit: deliver signal_info regarless of syscall
When a process signals the audit daemon (shutdown, rotate, resume,
reconfig) but syscall auditing is not enabled, we still want to know the
identity of the process sending the signal to the audit daemon.

Move audit_signal_info() out of syscall auditing to general auditing but
create a new function audit_signal_info_syscall() to take care of the
syscall dependent parts for when syscall auditing is enabled.

Please see the github kernel audit issue
https://github.com/linux-audit/audit-kernel/issues/111

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-05-21 22:18:25 -04:00
Richard Guy Briggs
73e65b88fe audit: connect LOGIN record to its syscall record
Currently the AUDIT_LOGIN event is a standalone record that isn't
connected to any other records that may be part of its syscall event. To
avoid the confusion of generating two events, connect the records by
using its syscall context.

Please see the github issue
https://github.com/linux-audit/audit-kernel/issues/110

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-03-20 20:57:48 -04:00
Richard Guy Briggs
5f3d544f16 audit: remove audit_context when CONFIG_ AUDIT and not AUDITSYSCALL
Remove audit_context from struct task_struct and struct audit_buffer
when CONFIG_AUDIT is enabled but CONFIG_AUDITSYSCALL is not.

Also, audit_log_name() (and supporting inode and fcaps functions) should
have been put back in auditsc.c when soft and hard link logging was
normalized since it is only used by syscall auditing.

See github issue https://github.com/linux-audit/audit-kernel/issues/105

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-02-03 17:49:35 -05:00
Richard Guy Briggs
57d4657716 audit: ignore fcaps on umount
Don't fetch fcaps when umount2 is called to avoid a process hang while
it waits for the missing resource to (possibly never) re-appear.

Note the comment above user_path_mountpoint_at():
 * A umount is a special case for path walking. We're not actually interested
 * in the inode in this situation, and ESTALE errors can be a problem.  We
 * simply want track down the dentry and vfsmount attached at the mountpoint
 * and avoid revalidating the last component.

This can happen on ceph, cifs, 9p, lustre, fuse (gluster) or NFS.

Please see the github issue tracker
https://github.com/linux-audit/audit-kernel/issues/100

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: merge fuzz in audit_log_fcaps()]
Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-01-30 20:51:47 -05:00
Richard Guy Briggs
2fec30e245 audit: add support for fcaps v3
V3 namespaced file capabilities were introduced in
commit 8db6c34f1d ("Introduce v3 namespaced file capabilities")

Add support for these by adding the "frootid" field to the existing
fcaps fields in the NAME and BPRM_FCAPS records.

Please see github issue
https://github.com/linux-audit/audit-kernel/issues/103

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
[PM: comment tweak to fit an 80 char line width]
Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-01-25 13:31:23 -05:00
Richard Guy Briggs
4b7d248b3a audit: move loginuid and sessionid from CONFIG_AUDITSYSCALL to CONFIG_AUDIT
loginuid and sessionid (and audit_log_session_info) should be part of
CONFIG_AUDIT scope and not CONFIG_AUDITSYSCALL since it is used in
CONFIG_CHANGE, ANOM_LINK, FEATURE_CHANGE (and INTEGRITY_RULE), none of
which are otherwise dependent on AUDITSYSCALL.

Please see github issue
https://github.com/linux-audit/audit-kernel/issues/104

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: tweaked subject line for better grep'ing]
Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-01-25 13:03:23 -05:00
Richard Guy Briggs
626abcd13d audit: add syscall information to CONFIG_CHANGE records
Tie syscall information to all CONFIG_CHANGE calls since they are all a
result of user actions.

Exclude user records from syscall context:
Since the function audit_log_common_recv_msg() is shared by a number of
AUDIT_CONFIG_CHANGE and the entire range of AUDIT_USER_* record types,
and since the AUDIT_CONFIG_CHANGE message type has been converted to a
syscall accompanied record type, special-case the AUDIT_USER_* range of
messages so they remain standalone records.

See: https://github.com/linux-audit/audit-kernel/issues/59
See: https://github.com/linux-audit/audit-kernel/issues/50

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: fix line lengths in kernel/audit.c]
Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-01-18 17:53:29 -05:00