Commit graph

221 commits

Author SHA1 Message Date
Duje Mihanović
979663c3d2 clk: mmp: Remove old non-OF clock drivers
There are no MMP2, PXA168 or PXA910 boards still using board files which
would use these drivers, so remove them.

Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Link: https://lore.kernel.org/r/20230804-drop-old-mmp-clk-v1-1-0c07db6cee90@skole.hr
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-08-22 14:13:11 -07:00
Arnd Bergmann
1ea35b3557 ARM: s3c: remove s3c24xx specific hacks
A number of device drivers reference CONFIG_ARM_S3C24XX_CPUFREQ or
similar symbols that are no longer available with the platform gone,
though the drivers themselves are still used on newer platforms,
so remove these hacks.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-16 09:26:05 +01:00
Arnd Bergmann
c3848db316 ARM: davinci: drop DAVINCI_DMxxx references
Support for all the dm3xx/dm64xx SoCs is no longer
available, so drop all other references to those.

Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-12 10:53:12 +01:00
Linus Torvalds
2fcd8f108f This is the final part of the clk patches for this merge window.
The clk rate range series needed another week to fully bake. Maxime
 fixed the bug that broke clk notifiers and prevented this from being
 included in the first pull request. He also added a unit test on top to
 make sure it doesn't break so easily again. The majority of the series
 fixes up how the clk_set_rate_*() APIs work, particularly around when
 the rate constraints are dropped and how they move around when
 reparenting clks. Overall it's a much needed improvement to the clk rate
 range APIs that used to be pretty broken if you looked sideways.
 
 Beyond the core changes there are a few driver fixes for a compilation
 issue or improper data causing clks to fail to register or have the
 wrong parents. These are good to get in before the first -rc so that the
 system actually boots on the affected devices.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmNLfwARHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSW1uhAA0QMgI8Ywv18PfZi2vWGpAO9sB62DfmdU
 sbmsXrfEHdJmXmqT66Ydr8area6loeCagK4Vm/dEcgsf2DwI/xCdDra/ARZjLU49
 9VjgC332YLZzk6bHXsY2eqCA2TS6nV4ZoVsonkQv2vezYNLNk7FTgByzIcWpYiY8
 RuKEVHnp2yWwk5HrX+pELR0dMDCLTB3p+WVHmnQpyYVK+rcfaSNuDxLTSNXb3yEl
 tGTUu4eL09FMwyRZ4iGmRXpvzIacbthYmnGmEtnOYDeFV3k3wBwHPbEizstvS0MI
 vv89aHdsOnGgTdzPUZtA6UppByajyoDKbYzb3hw8pUPNNykbq6XmaeBTV7U2O9De
 ihfeHVlDjN2HCv1HXfDsCaqlD6WM25T+pmKPT45Zj9b+rKkxloVxsOBuLmMzDgNd
 fa1X3qfGfzm5jpZ1SVSTLdRSqOT5Q00nzAgQailUiDoumgdTSN5ZDNPHcIv/Crvn
 me+pabVldp0tgYvuNWYr46u7ugwnzUMBVJfnQ+xZTl8xqLQ/yRmkkhB/rsS5RDY1
 z6NZ66JyHpSwnaev4Ozjyj8GlRdgDUVHGa/4Vm1jJSbUb7THZGSzjCklZXPxkn8I
 VqHNJN+luzaf6bKe85yrgUJKOi8NMZZS//MKWDnOdhDqgqtI0pM4hJX+Tvb2Bc4B
 2SA7XzHesKg=
 =ZG8Y
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull more clk updates from Stephen Boyd:
 "This is the final part of the clk patches for this merge window.

  The clk rate range series needed another week to fully bake. Maxime
  fixed the bug that broke clk notifiers and prevented this from being
  included in the first pull request. He also added a unit test on top
  to make sure it doesn't break so easily again. The majority of the
  series fixes up how the clk_set_rate_*() APIs work, particularly
  around when the rate constraints are dropped and how they move around
  when reparenting clks. Overall it's a much needed improvement to the
  clk rate range APIs that used to be pretty broken if you looked
  sideways.

  Beyond the core changes there are a few driver fixes for a compilation
  issue or improper data causing clks to fail to register or have the
  wrong parents. These are good to get in before the first -rc so that
  the system actually boots on the affected devices"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (31 commits)
  clk: tegra: Fix Tegra PWM parent clock
  clk: at91: fix the build with binutils 2.27
  clk: qcom: gcc-msm8660: Drop hardcoded fixed board clocks
  clk: mediatek: clk-mux: Add .determine_rate() callback
  clk: tests: Add tests for notifiers
  clk: Update req_rate on __clk_recalc_rates()
  clk: tests: Add missing test case for ranges
  clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d
  clk: Introduce the clk_hw_get_rate_range function
  clk: Zero the clk_rate_request structure
  clk: Stop forwarding clk_rate_requests to the parent
  clk: Constify clk_has_parent()
  clk: Introduce clk_core_has_parent()
  clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock
  clk: Add our request boundaries in clk_core_init_rate_req
  clk: Introduce clk_hw_init_rate_request()
  clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller
  clk: Change clk_core_init_rate_req prototype
  clk: Set req_rate on reparenting
  clk: Take into account uncached clocks in clk_set_rate_range()
  ...
2022-10-16 11:08:19 -07:00
Linus Torvalds
ca1aaf9937 ARM: fixes for 6.1
These are three fixes for build warnings that came in during the
 merge window.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmNJxugACgkQmmx57+YA
 GNmFXxAAnjfruTyGp5zM0SyNxnVI6cncTiS4KjfANYXxPCZmU7frxxzjYB+dk8x8
 U8AUjJvupdQ7m1DuAR3708h70GBiRttmvw5wZgB8ln3SX+KuEHo+2O/WkxqR+rYg
 IXCUdZCs+20638hahXpedHh9jTNPbXfgkzxFbhQX7uSNfwhAIgHd55JbT4lrqdIk
 6Eguls15Zlm94O/v9oWW07jQIIxts2VjSaH13llG0tVyMQiRX4ExI3Wra/JWI9Tv
 nqJD6E6Nmv55ei0uAVBS7KHS/kUOtRNJGH2CcM/CN1+2o38mRuC+0gda5Lk2tzzB
 saxh7BjXOzJtw8Jrh9FBTptyAUKS5FwvFqnSOwq5Wt9VqFYchYxarv2D/xKPP7FN
 77bn3Ea36kICRLL10Z3khaiabyRbS2vyUBgLGgGSZ21F//GU0GyIRy4hPCA8NATu
 8a4iAxYs80eNdGl2qLQsvvfh7xe9swwvfm34vm75LbUTonn9+KE2p9K4Hry1KwhO
 ZNrrO6MXjcCN3S0UhL1d9/fh8yBsKgP5c9IKLVbAlQzpdxTW81LYz4UKGytHI0Mi
 7vPEmz5mvrr9Fpo7+HesjXzwhNu1yo2R4DL24hmApwwm5cxPcfkhW7X1WmMNFqPx
 kwnad5ONLDdL5Fum7j/OluqAHalP1uKvuWS5Rou1MnEYV9Dkvhk=
 =HTmF
 -----END PGP SIGNATURE-----

Merge tag 'arm-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "These are three fixes for build warnings that came in during the merge
  window"

* tag 'arm-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: mmp: Make some symbols static
  ARM: spear6xx: Staticize few definitions
  clk: spear: Move prototype to accessible header
2022-10-14 13:44:53 -07:00
Kefeng Wang
57d849636a clk: at91: fix the build with binutils 2.27
There is an issue when build with older versions of binutils 2.27.0,

arch/arm/mach-at91/pm_suspend.S: Assembler messages:
arch/arm/mach-at91/pm_suspend.S:1086: Error: garbage following instruction -- `ldr tmp1,=0x00020010UL'

Use UL() macro to fix the issue in assembly file.

Fixes: 4fd36e4583 ("ARM: at91: pm: add plla disable/enable support for sam9x60")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Link: https://lore.kernel.org/r/20221012030635.13140-1-wangkefeng.wang@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-14 13:39:23 -07:00
Viresh Kumar
9afd20a5a1
clk: spear: Move prototype to accessible header
Fixes the following W=1 kernel build warning(s):

 drivers/clk/spear/spear6xx_clock.c:116:13: warning: no previous prototype for function 'spear6xx_clk_init' [-Wmissing-prototypes]

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-10 10:37:58 +02:00
Lukas Bulwahn
12198d9179 clk: davinci: remove PLL and PSC clocks for DaVinci DM644x and DM646x
Commit 7dd3376448 ("ARM: davinci: Delete DM644x board files") and commit
b4aed01de4 ("ARM: davinci: Delete DM646x board files") removes the
support for DaVinci DM644x and DM646x boards.

Hence, remove the PLL and PSC clock descriptions for those boards as well.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20220720082934.17741-1-lukas.bulwahn@gmail.com
Reviewed-by: David Lechner <david@lechnology.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-31 18:07:56 -07:00
Thomas Gleixner
5a729246e5 treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE
Based on the normalized pattern:

    this program is free software you can redistribute it and/or modify it
    under the terms of the gnu general public license version 2 as
    published by the free software foundation  this program is distributed
    as is without any warranty of any kind whether express or implied
    without even the implied warranty of merchantability or fitness for a
    particular purpose see the gnu general public license for more details

extracted by the scancode license scanner the SPDX license identifier

    GPL-2.0-only

has been chosen to replace the boilerplate/reference.

Reviewed-by: Allison Randal <allison@lohutok.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 14:51:36 +02:00
Arnd Bergmann
3c816d950a ARM: pxa: move clk register definitions to driver
The clock register definitions are now used (almost) exclusively in the
clk driver, and that relies on no other mach/*.h header files any more.

Remove the dependency on mach/pxa*-regs.h by addressing the registers
as offsets from a void __iomem * pointer, which is either passed from
a board file, or (for the moment) ioremapped at boot time from a hardcoded
address in case of DT (this should be moved into the DT of course).

Cc: linux-clk@vger.kernel.org
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-07 22:55:49 +02:00
Arnd Bergmann
5c6603e741 cpufreq: pxa3: move clk register access to clk driver
The driver needs some low-level register access for setting
the core and bus frequencies. These registers are owned
by the clk driver, so move the low-level access into that
driver with a slightly higher-level interface and avoid
any machine header file dependencies.

Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-07 22:55:49 +02:00
Linus Torvalds
6a34fdcca4 RTC for 5.18
Subsystem:
  - remove uie_unsupported, all users have been converted to clear
    RTC_FEATURE_UPDATE_INTERRUPT and provide a reason
  - RTCs with an alarm with a resolution of a minute are now letting the core
    handle rounding down the alarm time
  - fix use-after-free on device removal
 
 New driver:
  - OP-TEE RTC PTA
 
 Drivers:
  - sun6i: Add H616 support
  - cmos: Fix the AltCentury for AMD platforms
  - spear: set range
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEBqsFVZXh8s/0O5JiY6TcMGxwOjIFAmJGJ0wACgkQY6TcMGxw
 OjKAXQ/9EId70uY/kUQv2Ay2+NysfSFYpDoerf1V55vGyN+n/pxX14bUxTx0Ivse
 47ROcWSP94MSw9cExNvujkpY/V6xaQI3/jxWC60f5ngHzAwIArmmDdWMSLDmRJYi
 mg07Hp9bSTIgXVzBdlAJc6vSRDmznKB44TTrz6GvulLJROAy9jNJwefuxwsV9Ftl
 I6PcRtYGn5poPpp7yLi1IZ1m0gWJJVze9IsJWJjTRSzh9xAYnjOsMR5H8fyMLjh9
 1KjiHwV1c5En4HtrMrYPXOdeLTgNfCdfHaLRRhZRSE+dTK4551TbYbeG2GtKWkdR
 Xvybwik2kghde8+/sh6hhg59NGkfMkzLByc41P0VWfDEscyi3z+YXot2OOV+FfkI
 XpDPab+a2IQaGFYEa4sGVloFP4e9er5uRHRPkT6bX07plACMwV1wLSRqCK/RriV6
 HYImdP7/aA4t/OlmVdliyiyOZfO+oHX/z8hhkNbTJc5HpvgViDEKKEsOEef6OcRh
 j+p8ej6iaVt1wjYpfghHYanFzVPi98zGH0QMS9GmHbS+VetGYxzUVyKgzAsOMwYA
 RwTunNkQQqgiz+C4n2s/PDD4ZuNDFDFaEE+3RReaw/9LGkR007TCxwcNBEGde+B6
 1W4B9tNMGLI/hHulv7WYNrP/5Y/QPEuPiu+FxhwpNm5tDg1Ur70=
 =7E0a
 -----END PGP SIGNATURE-----

Merge tag 'rtc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "The bulk of the patches are about replacing the uie_unsupported struct
  rtc_device member by a feature bit.

  Subsystem:

   - remove uie_unsupported, all users have been converted to clear
     RTC_FEATURE_UPDATE_INTERRUPT and provide a reason

   - RTCs with an alarm with a resolution of a minute are now letting
     the core handle rounding down the alarm time

   - fix use-after-free on device removal

  New driver:

   - OP-TEE RTC PTA

  Drivers:

   - sun6i: Add H616 support

   - cmos: Fix the AltCentury for AMD platforms

   - spear: set range"

* tag 'rtc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (56 commits)
  rtc: check if __rtc_read_time was successful
  rtc: gamecube: Fix refcount leak in gamecube_rtc_read_offset_from_sram
  rtc: mc146818-lib: Fix the AltCentury for AMD platforms
  rtc: optee: add RTC driver for OP-TEE RTC PTA
  rtc: pm8xxx: Return -ENODEV if set_time disallowed
  rtc: pm8xxx: Attach wake irq to device
  clk: sunxi-ng: sun6i-rtc: include clk/sunxi-ng.h
  rtc: remove uie_unsupported
  rtc: xgene: stop using uie_unsupported
  rtc: hym8563: switch to RTC_FEATURE_UPDATE_INTERRUPT
  rtc: hym8563: let the core handle the alarm resolution
  rtc: hym8563: switch to devm_rtc_allocate_device
  rtc: efi: switch to RTC_FEATURE_UPDATE_INTERRUPT
  rtc: efi: switch to devm_rtc_allocate_device
  rtc: add new RTC_FEATURE_ALARM_WAKEUP_ONLY feature
  rtc: spear: fix spear_rtc_read_time
  rtc: spear: drop uie_unsupported
  rtc: spear: set range
  rtc: spear: switch to devm_rtc_allocate_device
  rtc: pcf8563: switch to RTC_FEATURE_UPDATE_INTERRUPT
  ...
2022-04-01 09:37:18 -07:00
Samuel Holland
d91612d7f0 clk: sunxi-ng: Add support for the sun6i RTC clocks
The RTC power domain in sun6i and newer SoCs manages the 16 MHz RC
oscillator (called "IOSC" or "osc16M") and the optional 32 kHz crystal
oscillator (called "LOSC" or "osc32k"). Starting with the H6, this power
domain also handles the 24 MHz DCXO (called variously "HOSC", "dcxo24M",
or "osc24M") as well. The H6 also adds a calibration circuit for IOSC.

Later SoCs introduce further variations on the design:
 - H616 adds an additional mux for the 32 kHz fanout source.
 - R329 adds an additional mux for the RTC timekeeping clock, a clock
   for the SPI bus between power domains inside the RTC, and removes the
   IOSC calibration functionality.

Take advantage of the CCU framework to handle this increased complexity.
This driver is intended to be a drop-in replacement for the existing RTC
clock provider. So some runtime adjustment of the clock parents is
needed, both to handle hardware differences, and to support the old
binding which omitted some of the input clocks.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220203021736.13434-6-samuel@sholland.org
2022-03-23 19:58:38 +01:00
Claudiu Beznea
9584e7263e ARM: at91: PM: add cpu idle support for sama7g5
Add CPU idle support for SAMA7G5. Support will make use of PMC_CPU_RATIO
register to divide the CPU clock by 16 before switching it to idle and
use automatic self-refresh option of DDR controller.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220113144900.906370-5-claudiu.beznea@microchip.com
2022-02-25 12:36:25 +01:00
Samuel Holland
91389c3905
clk: sunxi-ng: Allow the CCU core to be built as a module
Like the individual CCU drivers, it can be beneficial for memory
consumption of cross-platform configurations to only load the CCU core
on the relevant platform. For example, a generic arm64 kernel sees the
following improvement when building the CCU core and drivers as modules:

  before:
    text      data     bss     dec       hex      filename
    13882360  5251670  360800  19494830  12977ae  vmlinux

  after:
    text      data     bss     dec       hex      filename
    13734787  5086442  360800  19182029  124b1cd  vmlinux

So the result is a 390KB total reduction in kernel image size.

The one early clock provider (sun5i) requires the core to be built in.

Now that loading the MMC driver will trigger loading the CCU core, the
MMC timing mode functions do not need a compile-time fallback.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20211119033338.25486-5-samuel@sholland.org
2021-11-23 10:29:05 +01:00
Thierry Reding
4ad81f6ef8 clk: tegra: Add stubs needed for compile testing
These stubs are needed to allow the tegra-cpuidle driver to be
compile-tested.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-10-05 19:08:11 +02:00
Claudiu Beznea
ec03f18cc2 clk: at91: add register definition for sama7g5's master clock
Add register definitions for SAMA7G5's master clock. These would be
also used by architecture specific power saving code.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210719080317.1045832-3-claudiu.beznea@microchip.com
2021-07-19 14:28:56 +02:00
Stephen Boyd
029eae234b Merge branches 'clk-legacy', 'clk-vc5', 'clk-allwinner', 'clk-nvidia' and 'clk-imx' into clk-next
* clk-legacy:
  clkdev: remove unused clkdev_alloc() interfaces
  clkdev: remove CONFIG_CLKDEV_LOOKUP
  m68k: coldfire: remove private clk_get/clk_put
  m68k: coldfire: use clkdev_lookup on most coldfire
  mips: ralink: convert to CONFIG_COMMON_CLK
  mips: ar7: convert to CONFIG_COMMON_CLK
  mips: ar7: convert to clkdev_lookup

* clk-vc5:
  clk: vc5: fix output disabling when enabling a FOD

* clk-allwinner:
  clk: sunxi-ng: v3s: fix incorrect postdivider on pll-audio

* clk-nvidia:
  clk: tegra: clk-tegra124-dfll-fcpu: don't use devm functions for regulator
  clk: tegra: tegra124-emc: Fix clock imbalance in emc_set_timing()
  clk: tegra: Add stubs needed for compile-testing
  clk: tegra: Don't deassert reset on enabling clocks
  clk: tegra: Mark external clocks as not having reset control
  clk: tegra: cclk: Handle thermal DIV2 CPU frequency throttling
  clk: tegra: Don't allow zero clock rate for PLLs
  clk: tegra: Halve SCLK rate on Tegra20
  clk: tegra: Ensure that PLLU configuration is applied properly
  clk: tegra: Fix refcounting of gate clocks
  clk: tegra30: Use 300MHz for video decoder by default

* clk-imx:
  clk: imx8mq: remove SYS PLL 1/2 clock gates
  clk: imx: scu: Do not enable runtime PM for CPU clks
  clk: imx: scu: add parent save and restore
  clk: imx: scu: Only save DC SS clock using non-cached clock rate
  clk: imx: scu: Add A72 frequency scaling support
  clk: imx: scu: Add A53 frequency scaling support
  clk: imx: scu: bypass pi_pll enable status restore
  clk: imx: scu: detach pd if can't power up
  clk: imx: scu: bypass cpu clock save and restore
  clk: imx: scu: add parallel port clock ops
  clk: imx: scu: add more scu clocks
  clk: imx: scu: add enet rgmii gpr clocks
  clk: imx8qm: add clock valid resource checking
  clk: imx8qxp: add clock valid checking mechnism
  clk: imx: scu: add gpr clocks support
  clk: imx: scu: remove legacy scu clock binding support
  dt-bindings: arm: imx: scu: drop deprecated legacy clock binding
  dt-bindings: arm: imx: scu: fix naming typo of clk compatible string
  clk: imx: Remove the audio ipg clock from imx8mp
2021-06-29 13:33:10 -07:00
Dario Binacchi
0899431f95 clk: ti: add am33xx/am43xx spread spectrum clock support
The patch enables spread spectrum clocking (SSC) for MPU and LCD PLLs.
As reported by the TI spruh73x/spruhl7x RM, SSC is only supported for
the DISP/LCD and MPU PLLs on am33xx/am43xx. SSC is not supported for
DDR, PER, and CORE PLLs.

Calculating the required values and setting the registers accordingly
was taken from the set_mpu_spreadspectrum routine contained in the
arch/arm/mach-omap2/am33xx/clock_am33xx.c file of the u-boot project.

In locked condition, DPLL output clock = CLKINP *[M/N]. In case of
SSC enabled, the reference manual explains that there is a restriction
of range of M values. Since the omap2_dpll_round_rate routine attempts
to select the minimum possible N, the value of M obtained is not
guaranteed to be within the range required. With the new "ti,min-div"
parameter it is possible to increase N and consequently M to satisfy the
constraint imposed by SSC.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Tero Kristo <kristo@kernel.org>
Link: https://lore.kernel.org/r/20210606202253.31649-6-dariobin@libero.it
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-08 17:49:16 -07:00
Dmitry Osipenko
e848edae31 clk: tegra: Add stubs needed for compile-testing
Add stubs needed for compile-testing of Tegra memory drivers.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-06-01 13:37:40 +02:00
JC Kuo
54443ef6f5 clk: tegra: Add PLLE HW power sequencer control
PLLE has a hardware power sequencer logic which is a state machine
that can power on/off PLLE without any software intervention. The
sequencer has two inputs, one from XUSB UPHY PLL and the other from
SATA UPHY PLL. PLLE provides reference clock to XUSB and SATA UPHY
PLLs. When both of the downstream PLLs are powered-off, PLLE hardware
power sequencer will automatically power off PLLE for power saving.

XUSB and SATA UPHY PLLs also have their own hardware power sequencer
logic. XUSB UPHY PLL is shared between XUSB SuperSpeed ports and PCIE
controllers. The XUSB UPHY PLL hardware power sequencer has inputs
from XUSB and PCIE. When all of the XUSB SuperSpeed ports and PCIE
controllers are in low power state, XUSB UPHY PLL hardware power
sequencer automatically power off PLL and flags idle to PLLE hardware
power sequencer. Similar applies to SATA UPHY PLL.

PLLE hardware power sequencer has to be enabled after both downstream
sequencers are enabled.

This commit adds two helper functions:
1. tegra210_plle_hw_sequence_start() for XUSB PADCTL driver to enable
   PLLE hardware sequencer at proper time.

2. tegra210_plle_hw_sequence_is_enabled() for XUSB PADCTL driver to
   check whether PLLE hardware sequencer has been enabled or not.

Signed-off-by: JC Kuo <jckuo@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-03-24 14:01:58 +01:00
Linus Torvalds
28b9aaac4c This is all driver updates, the majority of which is a bunch of new Qualcomm
clk drivers that dominate the diffstat because we add support for six SoCs from
 that particular vendor. The other big change is the removal of various clk
 drivers that are no longer used now that the kernel is dropping support for
 those SoCs. Beyond that there's the usual non-critical fixes for existing
 drivers and a good number of patches from Lee Jones that cleanup a bunch of W=1
 enabled builds.
 
 Removed Drivers:
  - Remove efm32 clk driver
  - Remove tango4 clk driver
  - Remove zte zx clk driver
  - Remove sirf prima2/atlast clk drivers
  - Remove u300 clk driver
 
 New Drivers:
  - PLL support on MStar/SigmaStar ARMv7 SoCs
  - CPU clks for Qualcomm SDX55
  - GCC and RPMh clks for Qualcomm SC8180x and SC7280 SoCs
  - GCC clks for Qualcomm SM8350
  - GPU clks for Qualcomm SDM660/SDM630
 
 Updates:
  - Video clk fixups on Qualcomm SM8250
  - Improvements for multimedia clks on Qualcomm MSM8998
  - Fix many warnings with W=1 enabled builds under drivers/clk/
  - Support crystal load capacitance for Versaclock VC5
  - Add a "skip recall" DT binding for Silicon Labs' si570 to avoid glitches at boot
  - Convert Xilinx VCU clk driver to a proper clk provider driver
  - Expose Xilinx ZynqMP clk driver to more platforms
  - Amlogic pll driver fixup
  - Amlogic meson8b clock controller dt support clean up
  - Remove mipi clk from the Amlogic axg clock controller
  - New Rockchip rk3368 clock ids related to camera input
  - Use pr_notice() instead of pr_warn() on i.MX6Q pre-boot ldb_di_clk reparenting
  - A series from Liu Ying that adds some SCU clocks support for i.MX8qxp
    DC0/MIPI-LVDS subsystems
  - A series from Lucas Stach that adds PLL monitor clocks for i.MX8MQ, and
    clkout1/2 support for i.MX8MM/MN
  - Add I2c and Ethernet (RAVB) clocks on Renesas R-Car V3U
  - Add timer (TMU) clocks on most Renesas R-Car Gen3 SoCs
  - Add video-related (FCPVD/VSPD/VSPX), watchdog (RWDT), serial
    (HSCIF), pincontrol/GPIO (PFC/GPIO), SPI (MSIOF), SDHI, and DMA
    (SYS-DMAC) clocks on Renesas R-Car V3U
  - Add support for the USB 2.0 clock selector on Renesas RZ/G2 SoCs
  - Allwinner H616 SoC clk support
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmAwFu8RHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSXiWQ/+LbMeJF5zSvK240XcWomyS+kmImqKPT6e
 +l9Lt5xEPc+KzfMFHGAv+b6vMZCYevMIjBYCleiQ3oSh3sICFJmcCI8AkwQ62aQC
 32VL0z8U956SxmlCcgIgHK3yKUDSZcNC9FtfGRIRzR6srx+Eu/8TK007RpAYn2bQ
 PZYzOjiueSjOpjTRry2WGiCvpwRaJ7XrGj7P4rshO5eKpML1hYAv84vm12QrkoTR
 j7B73x1bOYf4NUBGGzYH5kw6tDO4mZvR+0TdyjI2Yg+SvHSdkpv9pxgRSAFus6rv
 sY/EjUCmCgp+y/MuMRvMA7vk6+THTqF9v4HqE0+izUI+dIoeDmsFVPr3UXGhqmtm
 wmdsMuG/cMhj1rIFz+1aNXQjdbitwmTCyqbiyt+6fOH3NkrP4vQACzQlxeBS2n6o
 E02lMwvMEoLcBMQyWLG+IWasIYWp7L2FlTOGOHxlAkZxJwNmynfaWYafoaIfOtBk
 qtk3ZjNFo3av94AWuKieeWdOj3CY3LGhQqwVuJudOzfvcBu3UybCfceHIwXuIWk1
 msUOh2RA7CTXn7XYPszwEbOlWugKvUc46rTfDBXsmgir7sIIgVXK65SO9xPWd7Bz
 b7MDtrQwSTNYecxjI6uUPRrzKM6xSnL8I69lxaUWT1ScXFcOjqOgc6iwSfLNj4lh
 FFCMY5koKMw=
 =dDCt
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This is all driver updates, the majority of which is a bunch of new
  Qualcomm clk drivers that dominate the diffstat because we add support
  for six SoCs from that particular vendor.

  The other big change is the removal of various clk drivers that are no
  longer used now that the kernel is dropping support for those SoCs.

  Beyond that there's the usual non-critical fixes for existing drivers
  and a good number of patches from Lee Jones that cleanup a bunch of
  W=1 enabled builds.

  Removed Drivers:
   - Remove efm32 clk driver
   - Remove tango4 clk driver
   - Remove zte zx clk driver
   - Remove sirf prima2/atlast clk drivers
   - Remove u300 clk driver

  New Drivers:
   - PLL support on MStar/SigmaStar ARMv7 SoCs
   - CPU clks for Qualcomm SDX55
   - GCC and RPMh clks for Qualcomm SC8180x and SC7280 SoCs
   - GCC clks for Qualcomm SM8350
   - GPU clks for Qualcomm SDM660/SDM630

  Updates:
   - Video clk fixups on Qualcomm SM8250
   - Improvements for multimedia clks on Qualcomm MSM8998
   - Fix many warnings with W=1 enabled builds under drivers/clk/
   - Support crystal load capacitance for Versaclock VC5
   - Add a "skip recall" DT binding for Silicon Labs' si570 to avoid
     glitches at boot
   - Convert Xilinx VCU clk driver to a proper clk provider driver
   - Expose Xilinx ZynqMP clk driver to more platforms
   - Amlogic pll driver fixup
   - Amlogic meson8b clock controller dt support clean up
   - Remove mipi clk from the Amlogic axg clock controller
   - New Rockchip rk3368 clock ids related to camera input
   - Use pr_notice() instead of pr_warn() on i.MX6Q pre-boot ldb_di_clk
     reparenting
   - A series from Liu Ying that adds some SCU clocks support for
     i.MX8qxp DC0/MIPI-LVDS subsystems
   - A series from Lucas Stach that adds PLL monitor clocks for i.MX8MQ,
     and clkout1/2 support for i.MX8MM/MN
   - Add I2c and Ethernet (RAVB) clocks on Renesas R-Car V3U
   - Add timer (TMU) clocks on most Renesas R-Car Gen3 SoCs
   - Add video-related (FCPVD/VSPD/VSPX), watchdog (RWDT), serial
     (HSCIF), pincontrol/GPIO (PFC/GPIO), SPI (MSIOF), SDHI, and DMA
     (SYS-DMAC) clocks on Renesas R-Car V3U
   - Add support for the USB 2.0 clock selector on Renesas RZ/G2 SoCs
   - Allwinner H616 SoC clk support"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (171 commits)
  clk: mstar: msc313-mpll: Fix format specifier
  clk: mstar: Allow MStar clk drivers to be compile tested
  clk: qoriq: use macros to generate pll_mask
  clk: qcom: Add Global Clock controller (GCC) driver for SC7280
  dt-bindings: clock: Add SC7280 GCC clock binding
  clk: qcom: rpmh: Add support for RPMH clocks on SC7280
  dt-bindings: clock: Add RPMHCC bindings for SC7280
  clk: qcom: gcc-sm8350: add gdsc
  dt-bindings: clock: Add QCOM SDM630 and SDM660 graphics clock bindings
  clk: qcom: Add SDM660 GPU Clock Controller (GPUCC) driver
  clk: qcom: mmcc-msm8996: Migrate gfx3d clock to clk_rcg2_gfx3d
  clk: qcom: rcg2: Stop hardcoding gfx3d pingpong parent numbers
  dt-bindings: clock: Add support for the SDM630 and SDM660 mmcc
  clk: qcom: Add SDM660 Multimedia Clock Controller (MMCC) driver
  clk: qcom: gcc-sdm660: Mark GPU CFG AHB clock as critical
  clk: qcom: gcc-sdm660: Mark MMSS NoC CFG AHB clock as critical
  clk: qcom: gpucc-msm8998: Allow fabia gpupll0 rate setting
  clk: qcom: gpucc-msm8998: Add resets, cxc, fix flags on gpu_gx_gdsc
  clk: qcom: gdsc: Implement NO_RET_PERIPH flag
  clk: mstar: MStar/SigmaStar MPLL driver
  ...
2021-02-22 09:45:23 -08:00
Stephen Boyd
4d5c4ae329 Merge branches 'clk-socfpga', 'clk-mstar', 'clk-qcom' and 'clk-warnings' into clk-next
- PLL support on MStar/SigmaStar ARMv7 SoCs
 - CPU clks for Qualcomm SDX55
 - GCC and RPMh clks for Qualcomm SC8180x and SC7280 SoCs
 - GCC clks for Qualcomm SM8350
 - Video clk fixups on Qualcomm SM8250
 - GPU clks for Qualcomm SDM660/SDM630
 - Improvements for multimedia clks on Qualcomm MSM8998
 - Fix many warnings with W=1 enabled builds under drivers/clk/

* clk-socfpga:
  clk: socfpga: agilex: add clock driver for eASIC N5X platform
  dt-bindings: documentation: add clock bindings information for eASIC N5X

* clk-mstar:
  clk: mstar: msc313-mpll: Fix format specifier
  clk: mstar: Allow MStar clk drivers to be compile tested
  clk: mstar: MStar/SigmaStar MPLL driver
  clk: fixed: add devm helper for clk_hw_register_fixed_factor()
  dt-bindings: clk: mstar msc313 mpll binding description
  dt-bindings: clk: mstar msc313 mpll binding header

* clk-qcom: (42 commits)
  clk: qcom: Add Global Clock controller (GCC) driver for SC7280
  dt-bindings: clock: Add SC7280 GCC clock binding
  clk: qcom: rpmh: Add support for RPMH clocks on SC7280
  dt-bindings: clock: Add RPMHCC bindings for SC7280
  clk: qcom: gcc-sm8350: add gdsc
  dt-bindings: clock: Add QCOM SDM630 and SDM660 graphics clock bindings
  clk: qcom: Add SDM660 GPU Clock Controller (GPUCC) driver
  clk: qcom: mmcc-msm8996: Migrate gfx3d clock to clk_rcg2_gfx3d
  clk: qcom: rcg2: Stop hardcoding gfx3d pingpong parent numbers
  dt-bindings: clock: Add support for the SDM630 and SDM660 mmcc
  clk: qcom: Add SDM660 Multimedia Clock Controller (MMCC) driver
  clk: qcom: gcc-sdm660: Mark GPU CFG AHB clock as critical
  clk: qcom: gcc-sdm660: Mark MMSS NoC CFG AHB clock as critical
  clk: qcom: gpucc-msm8998: Allow fabia gpupll0 rate setting
  clk: qcom: gpucc-msm8998: Add resets, cxc, fix flags on gpu_gx_gdsc
  clk: qcom: gdsc: Implement NO_RET_PERIPH flag
  clk: qcom: mmcc-msm8998: Set bimc_smmu_gdsc always on
  clk: qcom: mmcc-msm8998: Add hardware clockgating registers to some clks
  clk: qcom: gcc-msm8998: Fix Alpha PLL type for all GPLLs
  clk: qcom: gcc-msm8998: Mark gpu_cfg_ahb_clk as critical
  ...

* clk-warnings: (27 commits)
  clk: zynq: clkc: Remove various instances of an unused variable 'clk'
  clk: versatile: clk-icst: Fix worthy struct documentation block
  clk: ti: gate: Fix possible doc-rot in 'omap36xx_gate_clk_enable_with_hsdiv_restore'
  clk: ti: dpll: Fix misnaming of '_register_dpll()'s 'user' parameter
  clk: ti: clockdomain: Fix description for 'omap2_init_clk_clkdm's hw param
  clk: st: clkgen-fsyn: Fix worthy struct documentation demote partially filled one
  clk: st: clkgen-pll: Demote unpopulated kernel-doc header
  clk: mvebu: ap-cpu-clk: Demote non-conformant kernel-doc header
  clk: socfpga: clk-pll-a10: Remove set but unused variable 'rc'
  clk: socfpga: clk-pll: Remove unused variable 'rc'
  clk: sifive: fu540-prci: Declare static const variable 'prci_clk_fu540' where it's used
  clk: bcm: clk-iproc-pll: Demote kernel-doc abuse
  clk: zynqmp: divider: Add missing description for 'max_div'
  clk: spear: Move prototype to accessible header
  clk: qcom: clk-rpm: Remove a bunch of superfluous code
  clk: clk-xgene: Add description for 'mask' and fix formatting for 'flags'
  clk: qcom: mmcc-msm8974: Remove unused static const tables 'mmcc_xo_mmpll0_1_2_gpll0{map}'
  clk: clk-npcm7xx: Remove unused static const tables 'npcm7xx_gates' and 'npcm7xx_divs_fx'
  clk: clk-fixed-mmio: Demote obvious kernel-doc abuse
  clk: qcom: gcc-ipq4019: Remove unused variable 'ret'
  ...
2021-02-16 14:09:24 -08:00
Lee Jones
f2ad937b62 clk: spear: Move prototype to accessible header
Fixes the following W=1 kernel build warning(s):

 drivers/clk/spear/spear1310_clock.c:385:13: warning: no previous prototype for ‘spear1310_clk_init’ [-Wmissing-prototypes]
 drivers/clk/spear/spear1340_clock.c:442:13: warning: no previous prototype for ‘spear1340_clk_init’ [-Wmissing-prototypes]

Cc: Viresh Kumar <vireshk@kernel.org>
Cc: Shiraz Hashim <shiraz.linux.kernel@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210126124540.3320214-20-lee.jones@linaro.org
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-11 11:56:06 -08:00
Lee Jones
de5774d192 clk: imx: Move 'imx6sl_set_wait_clk()'s prototype out to accessible header
Fixes the following W=1 kernel build warning(s):

 drivers/clk/imx/clk-imx6sl.c:156:6: warning: no previous prototype for ‘imx6sl_set_wait_clk’ [-Wmissing-prototypes]

Cc: Russell King <linux@armlinux.org.uk>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-30 22:13:23 +08:00
Dmitry Osipenko
281462e593 memory: tegra124-emc: Make driver modular
Add modularization support to the Tegra124 EMC driver, which now can be
compiled as a loadable kernel module.

Note that EMC clock must be registered at clk-init time, otherwise PLLM
will be disabled as unused clock at boot time if EMC driver is compiled
as a module. Hence add a prepare/complete callbacks. similarly to what is
done for the Tegra20/30 EMC drivers.

Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20201228154920.18846-2-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2021-01-05 18:00:09 +01:00
Krzysztof Kozlowski
e44cdff051 clk: samsung: Allow compile testing of Exynos, S3C64xx and S5Pv210
So far all Exynos, S3C64xx and S5Pv210 clock units were selected by
respective SOC/ARCH Kconfig option.  On a kernel built for selected
SoCs, this allowed to build only limited set of matching clock drivers.
However compile testing was not possible in such case as Makefile object
depends on SOC/ARCH option.

Add separate Kconfig options for each of them to be able to compile
test.

Link: https://lore.kernel.org/r/20201119164509.754851-1-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2020-11-23 10:25:45 +01:00
Krzysztof Kozlowski
16b17fcf77 clk: samsung: s3c24xx: declare s3c24xx_common_clk_init() in shared header
The s3c2410_common_clk_init() and others are defined and used by the
clk-s3c24xx driver and also used in the mach-s3c24xx machine code.  Move
the declaration to a header to fix W=1 build warnings:

    drivers/clk/samsung/clk-s3c2410.c:320:13: warning: no previous prototype for 's3c2410_common_clk_init' [-Wmissing-prototypes]
      320 | void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f,
    drivers/clk/samsung/clk-s3c2412.c:205:13: warning: no previous prototype for 's3c2412_common_clk_init' [-Wmissing-prototypes]
      205 | void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f,
    drivers/clk/samsung/clk-s3c2443.c:341:13: warning: no previous prototype for 's3c2443_common_clk_init' [-Wmissing-prototypes]
      341 | void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f,

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
2020-08-17 18:54:33 +02:00
Krzysztof Kozlowski
c2fe8ebb33 clk: samsung: s3c64xx: declare s3c64xx_clk_init() in shared header
The s3c64xx_clk_init() is defined and used by the clk-s3c64xx driver and
also used in the mach-s3c64xx machine code.  Move the declaration to a
header to fix W=1 build warning:

    drivers/clk/samsung/clk-s3c64xx.c:391:13: warning: no previous prototype for 's3c64xx_clk_init' [-Wmissing-prototypes]
      391 | void __init s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f,

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
2020-08-17 18:54:33 +02:00
Claudiu Beznea
ef396df992 clk: at91: clk-utmi: add utmi support for sama7g5
Add UTMI support for SAMA7G5. SAMA7G5's UTMI control is done via
XTALF register. Values written at bits 2..0 in this register
correspond to the on board crystal oscillator frequency.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/1595403506-8209-18-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24 02:19:08 -07:00
Claudiu Beznea
0416824edc clk: at91: add macro for pll ids mask
Add macro for PLL IDs mask.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/1595403506-8209-16-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24 02:19:08 -07:00
Claudiu Beznea
75c88143f3 clk: at91: clk-master: add master clock support for SAMA7G5
Add master clock support (MCK1..4) for SAMA7G5. SAMA7G5's PMC has
multiple master clocks feeding different subsystems. One of them
feeds image subsystem and is changeable based on image subsystem
needs.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/1595403506-8209-13-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24 02:19:08 -07:00
Joseph Lo
0ac65fc946 clk: tegra: Implement Tegra210 EMC clock
The EMC clock needs to carefully coordinate with the EMC controller
programming to make sure external memory can be properly clocked. Do so
by hooking up the EMC clock with an EMC provider that will specify which
rates are supported by the EMC and provide a callback to use for setting
the clock rate at the EMC.

Based on work by Peter De Schrijver <pdeschrijver@nvidia.com>.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-05-12 22:48:42 +02:00
Joseph Lo
a3cba697a2 clk: tegra: Export functions for EMC clock scaling
Export functions to allow accessing the CAR register required by EMC
clock scaling. These functions will be used to access the CAR register
as part of the scaling sequence.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-05-12 22:48:41 +02:00
Claudiu Beznea
e13208ab5d clk: at91: move sam9x60's PLL register offsets to PMC header
Move SAM9X60's PLL register offsets to PMC header so that the
definitions would also be available from arch/arm/mach-at91/pm_suspend.S.
This is necessary to disable/enable PLLA for SAM9X60 on suspend/resume.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/1579522208-19523-7-git-send-email-claudiu.beznea@microchip.com
2020-02-18 21:47:54 +01:00
Claudiu Beznea
0be298a939 ARM: at91: pm: add pmc_version member to at91_pm_data
This will be used to differentiate b/w different PLLs settings to be
applied in the final/first steps of the suspend/resume process by doing
PLL specific configurations.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/1579522208-19523-5-git-send-email-claudiu.beznea@microchip.com
2020-02-18 21:47:54 +01:00
Stephen Boyd
dabedfede3 Merge branches 'clk-gpio-flags', 'clk-tegra', 'clk-rockchip', 'clk-sprd' and 'clk-pxa' into clk-next
- Make gpio gate clks propagate rate setting up to parent

* clk-gpio-flags:
  clk: clk-gpio: propagate rate change to parent

* clk-tegra: (23 commits)
  clk: tegra: Use match_string() helper to simplify the code
  clk: tegra: Fix build error without CONFIG_PM_SLEEP
  clk: tegra: Add missing stubs for the case of !CONFIG_PM_SLEEP
  clk: tegra: Optimize PLLX restore on Tegra20/30
  clk: tegra: Add suspend and resume support on Tegra210
  clk: tegra: Share clk and rst register defines with Tegra clock driver
  clk: tegra: Use fence_udelay() during PLLU init
  clk: tegra: clk-dfll: Add suspend and resume support
  clk: tegra: clk-super: Add restore-context support
  clk: tegra: clk-super: Fix to enable PLLP branches to CPU
  clk: tegra: periph: Add restore_context support
  clk: tegra: Support for OSC context save and restore
  clk: tegra: pll: Save and restore pll context
  clk: tegra: pllout: Save and restore pllout context
  clk: tegra: divider: Save and restore divider rate
  clk: tegra: Reimplement SOR clocks on Tegra210
  clk: tegra: Reimplement SOR clock on Tegra124
  clk: tegra: Rename sor0_lvds to sor0_out
  clk: tegra: Move SOR0 implementation to Tegra124
  clk: tegra: Remove last remains of TEGRA210_CLK_SOR1_SRC
  ...

* clk-rockchip:
  clk: rockchip: protect the pclk_usb_grf as critical on px30
  clk: rockchip: add video-related niu clocks as critical on px30
  clk: rockchip: move px30 critical clocks to correct clock controller
  clk: rockchip: Add div50 clocks for px30 sdmmc, emmc, sdio and nandc
  clk: rockchip: Add div50 clock-ids for sdmmc on px30 and nandc
  clk: rockchip: make clk_half_divider_ops static

* clk-sprd:
  clk: sprd: Use IS_ERR() to validate the return value of syscon_regmap_lookup_by_phandle()

* clk-pxa:
  clk: pxa: fix one of the pxa RTC clocks
2019-11-27 08:15:00 -08:00
Dmitry Osipenko
5699d16055 clk: tegra: Add missing stubs for the case of !CONFIG_PM_SLEEP
The new CPUIDLE driver uses the Tegra's CLK API and that driver won't
strictly depend on CONFIG_PM_SLEEP, hence add the required stubs in
order to allow compiling of the new driver with the CONFIG_PM_SLEEP=n.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11 14:53:05 +01:00
Dmitry Osipenko
ed1a2459e2 clk: tegra: Add Tegra20/30 EMC clock implementation
A proper External Memory Controller clock rounding and parent selection
functionality is required by the EMC drivers, it is not available using
the generic clock implementation because only the Memory Controller driver
is aware of what clock rates are actually available for a particular
device. EMC drivers will have to register a Tegra-specific CLK-API
callback which will perform rounding of a requested rate. EMC clock users
won't be able to request EMC clock by getting -EPROBE_DEFER until EMC
driver is probed and the callback is set up.

The functionality is somewhat similar to the clk-emc.c which serves
Tegra124+ SoCs. The later HW generations support more parent clock sources
and the HW configuration / integration with the EMC drivers differs a tad
from the older gens, hence it's not really worth to try to squash
everything into a single source file.

Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11 14:01:22 +01:00
Tero Kristo
2209b72d41 clk: ti: clkctrl: add new exported API for checking standby info
Standby status is provided for certain clkctrl clocks to see if the
given module has entered standby or not. This is mostly needed by
remoteproc code to see if the remoteproc has entered standby and the clock
can be turned off safely.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2019-10-31 15:18:28 +02:00
Tero Kristo
22a6564f71 clk: ti: clkctrl: convert to use bit helper macros instead of bitops
This improves the readibility of the code slightly, and makes modifying
the flags bit simpler.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2019-10-31 15:18:28 +02:00
Masahiro Yamada
d7aef6ef96 clk: add include guard to clk-conf.h
Add a header include guard just in case.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Link: https://lkml.kernel.org/r/20190820030536.1181-1-yamada.masahiro@socionext.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17 10:27:46 -07:00
Thomas Gleixner
d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00
Thomas Gleixner
9c92ab6191 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282
Based on 1 normalized pattern(s):

  this software is licensed under the terms of the gnu general public
  license version 2 as published by the free software foundation and
  may be copied distributed and modified under those terms this
  program is distributed in the hope that it will be useful but
  without any warranty without even the implied warranty of
  merchantability or fitness for a particular purpose see the gnu
  general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 285 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:36:37 +02:00
Thomas Gleixner
9952f6918d treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms and conditions of the gnu general public license
  version 2 as published by the free software foundation this program
  is distributed in the hope it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details you should have received a copy of the gnu general
  public license along with this program if not see http www gnu org
  licenses

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 228 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528171438.107155473@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:29:52 -07:00
Thomas Gleixner
1a59d1b8e0 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not write to the free software foundation inc
  59 temple place suite 330 boston ma 02111 1307 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1334 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:35 -07:00
Thomas Gleixner
2874c5fd28 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:32 -07:00
Olof Johansson
faff3fcf01 AT91 SoC for 5.2
- PM changes for SAM9X60
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEADBLyYlprFuNbTVNPjnmE/d7ZC0FAly+oWgACgkQPjnmE/d7
 ZC1aZQ/+OXJh+v+38Gp+9aDkfDM8OHVR6h76gMzb38UWPqVxbR5bgclKT3mEg1j2
 blng9+3Jhy49zoOzgBmlF6NUgSGbUN5w7F7+gxvh3dt3NE0wLVUNmobUUkhk3mWO
 pSKX21TZS5AG/PmsACn2NYQ4+p2EnMOIocqlCInNvozzfoF6N/e8ImWnGGC6+rr/
 wrauPh69zFg4Djz06s1JGCcRI2kW3irtDlhxF8gEH7bovelmXRhgeRptHXQA7set
 kAmzm8xmCrlet3CCxx7xnnQ6gp//AXoTG6SAGJcDFbuDJinvtmo36o+8gGNt5fUN
 RHEbSFGthVaFFfvR9c8/XGcA9q1PvYylv+b21UklYVqRB01YMWyjUGJcb+38tbj2
 8j5tjpqzJqg8p/nIxTPlRoS+xZF7cG5TORjolzF4y0eEyouibOYn+8tqXmO0F36Q
 6rgdcHfajgks2j7AUtH8IV2d37ZF1i879qCQ5V45IVkAFKBUG8Iaa2v0DNAGWtpe
 y8pcfXpI5xIurDBKlctBxf/c6egPFKRTe4SxLJzimQaQblO4RF+cMfpmGmOe138j
 /u6h3yTaoF/2VkrR4DYCq5mZHBOON6BuBJqXWao8SK2eNZIt8LNKlN15w62qcj69
 rtDXT7FiOM4nqOlTpFqisFYCPnQS4yBga+IMMyAuMvT5FTtMi7E=
 =/W4W
 -----END PGP SIGNATURE-----

Merge tag 'at91-5.2-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/late

AT91 SoC for 5.2

 - PM changes for SAM9X60

* tag 'at91-5.2-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: at91: pm: do not disable/enable PLLA for ULP modes
  ARM: at91: pm: disable RC oscillator in ULP0
  ARM: at91: pm: add ULP1 support for SAM9X60
  ARM: at91: pm: add support for per SoC wakeup source configuration
  ARM: at91: pm: keep at91_pm_backup_init() only for SAMA5D2 SoCs
  ARM: at91: pm: initial PM support for SAM9X60
  dt-bindings: arm: atmel: add binding for SAM9X60 SoC
  ARM: at91: pm: introduce at91_soc_pm structure

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-05-16 11:05:11 -07:00
Stephen Boyd
0caf000817 Merge branch 'clk-ti' into clk-next
* clk-ti:
  clk: Remove CLK_IS_BASIC clk flag
  clk: ti: dra7: disable the RNG and TIMER12 clkctrl clocks on HS devices
  clk: ti: dra7x: prevent non-existing clkctrl clocks from registering
  ARM: omap2+: hwmod: drop CLK_IS_BASIC flag usage
  clk: ti: export the omap2_clk_is_hw_omap call
2019-05-07 11:46:02 -07:00
Stephen Boyd
ff060019f4 Merge branches 'clk-stm32f4', 'clk-tegra', 'clk-at91', 'clk-sifive-fu540' and 'clk-spdx' into clk-next
- Support for STM32F769
 - Rework AT91 sckc DT bindings
 - Fix slow RC oscillator issue on sama5d3
 - AT91 sam9x60 PMC support
 - SiFive FU540 PRCI and PLL support

* clk-stm32f4:
  clk: stm32mp1: Add ddrperfm clock
  clk: stm32: Introduce clocks of STM32F769 board

* clk-tegra:
  clk: tegra: divider: Mark Memory Controller clock as read-only
  clk: tegra: emc: Replace BUG() with WARN_ONCE()
  clk: tegra: emc: Fix EMC max-rate clamping
  clk: tegra: emc: Support multiple RAM codes
  clk: tegra: emc: Don't enable EMC clock manually
  clk: tegra124: Remove lock-enable bit from PLLM
  clk: tegra: Fix PLLM programming on Tegra124+ when PMC overrides divider
  clk: tegra: Don't enable already enabled PLLs

* clk-at91:
  clk: at91: Mark struct clk_range as const
  clk: at91: add sam9x60 pmc driver
  dt-bindings: clk: at91: add bindings for SAM9X60 pmc
  clk: at91: add sam9x60 PLL driver
  clk: at91: master: Add sam9x60 support
  clk: at91: usb: Add sam9x60 support
  clk: at91: allow configuring generated PCR layout
  clk: at91: allow configuring peripheral PCR layout
  clk: at91: sckc: handle different RC startup time
  clk: at91: modernize sckc binding
  dt-bindings: clock: at91: new sckc bindings

* clk-sifive-fu540:
  clk: sifive: add a driver for the SiFive FU540 PRCI IP block
  clk: analogbits: add Wide-Range PLL library
  dt-bindings: clk: add documentation for the SiFive PRCI driver

* clk-spdx:
  clk: sunxi-ng: Use the correct style for SPDX License Identifier
  clk: sprd: Use the correct style for SPDX License Identifier
  clk: renesas: Use the correct style for SPDX License Identifier
  clk: qcom: Use the correct style for SPDX License Identifier
  clk: davinci: Use the correct style for SPDX License Identifier
  clk: actions: Use the correct style for SPDX License Identifier
2019-05-07 11:45:29 -07:00