Commit Graph

650 Commits

Author SHA1 Message Date
Guenter Roeck 3ba9d977a9 hwmon: (it87) Add support for IT8620E
IT8620E is mostly compatible to IT7828F. Add generic support for it.

IT8620E supports up to 6 fan tachometers and 6 pwm controls.
Support for the 6th tachometer and for the additional pwm controls
are addded in separate patches.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-04-05 06:01:00 -07:00
Guenter Roeck 4ee07157d6 hwmon: (it87) Add support for IT8790E
IT8790E is a super-IO chip with three fan tachometers. It is mostly
compatible to IT8728F, but only supports three fan tachometers
instead of five.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-04-05 06:00:59 -07:00
Vadim V. Vlasov 9c947d25c9 hwmon: Add Nuvoton NCT7904 hwmon driver
The NCT7904D is a hardware monitor supporting up to 20 voltage sensors,
internal temperature sensor, Intel PECI and AMD SB-TSI CPU temperature
interface, up to 12 fan tachometer inputs, up to 4 fan control channels
with SmartFan.

Signed-off-by: Vadim V. Vlasov <vvlasov@dev.rtsoft.ru>
[Guenter Roeck: Fixed whitespace errors, dropped redundant comment]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09 09:59:36 -07:00
Thomas Lorblanches a0c1424acb hwmon: (it87) Add support for IT8786E
IT8786E is mostly compatible with IT8771 / IT8772.
Parameters determined by testing various combinations.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Thomas Lorblanches <zlika_ese@hotmail.com>
[Guenter Roeck: merged from github, addressed review comments]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09 09:59:36 -07:00
Guenter Roeck 0ea2f1db8e hwmon: (jc42) Add support for additional IDT temperature sensors
TS3000GB0 has a new device ID (0x2913). Since IDT's datasheets suggest
that the upper 8 bit of the device ID reflect the chip ID and the lower
8 bit reflect the version number, modify the code to accept all chips
with ID 0x29xx.

Also add support for TS3001 and TSE2004.

Some of the datasheets for older chips are no longer available from
the IDT web site, so replace explicit links in the documentation with
a generic note.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09 09:59:35 -07:00
Guenter Roeck 7bc32d298b hwmon: (it87) Add support for IT8781F
IT8781F is mostly compatible to IT8782F. Major difference is that it only
supports four instead of six UART channels, and therefore does not share
the uart6 pins.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09 09:59:35 -07:00
Kevin Hilman add513be1c hwmon: (ina2xx) Add ina231 compatible string
Add support for "ina231" as compatible string, and update
Documentation and Kconfig accordingly.

Tested with the Exynos5422-based odroid-xu3 board which has on-board
INA231 sensors.

Signed-off-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-01-25 21:23:59 -08:00
Bartosz Golaszewski 72a87a47a8 hwmon: (ina2xx) implement update_interval attribute for ina226
This attribute allows to configure the update interval of ina226. Although
the bus and shunt voltage conversion times remain hardcoded to 1.1 ms, we can
now modify said interval by changing the averaging rate.

While we're at it - add an additional variable to ina2xx_data, which holds
the current configuration settings - this way we'll be able to restore the
configuration in case of an unexpected chip reset.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-01-25 21:23:59 -08:00
Bartosz Golaszewski 8a5fc79513 hwmon: (ina2xx) make shunt resistance configurable at run-time
The shunt resistance can only be set via platform_data or device tree. This
isn't suitable for devices in which the shunt resistance can change/isn't
known at boot-time.

Add a sysfs attribute that allows to read and set the shunt resistance.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-01-25 21:23:59 -08:00
Guenter Roeck 907a6d5824 hwmon: (tmp401) Detect TMP435 on all addresses it supports
TMP435 supports a range of I2C addresses, not just 0x4c.

Cc: Patrick Titiano <ptitiano@baylibre.com>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-12-08 06:48:37 -08:00
Patrick Titiano 06adbaec2a hwmon: (tmp401) Add support for TI TMP435
Signed-off-by: Patrick Titiano <ptitiano@baylibre.com>
[Bartosz Golaszewski: prepared for submission, code review fixes]
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
[Guenter Roeck: Merged two patches into one]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-12-04 10:59:42 -08:00
Guenter Roeck dfcd4c53be hwmon: (lm95234) Add support for LM95233
LM95233 is similar to LM95234, but it only supports two
instead of four external temperature sensors.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-12-02 06:11:53 -08:00
Guenter Roeck 162a8dfe73 hwmon: (lm95245) Add support for LM95235
LM95235 is register compatible to LM95245.

Also update link to LM95245 data sheet, and drop the link to the
datasheet from the driver source to simplify code maintenance.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-12-02 03:44:18 -08:00
Guenter Roeck 8aefb93f09 hwmon: (nct6775) Add support for NCT6792D
NCT6792D is similar to NCT6791D. Only beep control and temperature
monitoring registers are different.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-11-30 20:13:13 -08:00
Guenter Roeck b6e6dd8e9f hwmon: (nct6775) Documentation updates
Document support for NCT6102D/NCT6104D/NCT6106D and NCT6791D.
Document that NCT5573D is compatible to NCT6775F with the same chip ID.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-11-30 20:13:13 -08:00
Michael Thalmeier 799fc60214 hwmon: (lm75) Add support for the NXP LM75B
It is basically a faster lm75 with improved (11 bit) resolution.

Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-11-30 20:13:13 -08:00
Guenter Roeck 3434f37835 hwmon: Driver for Nuvoton NCT7802Y
NCT7802Y is an I2C based hardware monitoring chip from Nuvoton.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-11-30 20:13:13 -08:00
Guenter Roeck 7ad8966f4f Immutable branch between MFD, HWMON, LEDs and Watchdog for v3.18
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUItc7AAoJEFGvii+H/HdhxTEP/A0Gg35acsBa8JPWUGuTcGTi
 GHDdnDh1sJtJWadKhs+JV9tOX80YY/5OaHr0TKXcb0eAZopqG4G4yyJXmju+rkFn
 sp4nQ4QzM8gNzmVpo6K45xdZw913QQbVcwDThnZwq1xMHVvMT2TFZ+PQLXZ2e2kN
 HRs65Ftw9geNlZ6cLSXPa+fmhbhC90izXRYB/+eSv9LfxJkARVBtRwVkjLnbe52h
 V7gm/sqcdLs4S0Iauv3qPCjmNCtLWjzJsjq+umiEmmwRvWXGHcLWxCSbmrMsi075
 VmMTY1G+ys2OaNo4wpMEx3s2+Cg/dxyMKfuJn3Zz+Wk196v4UaQWFKBfH8IcjcuJ
 zKy9RntFZ6Esut/PeaMlk7nlgkSXOEbQZFcMDhn8LFwL8LzVDUIMtmcIEsfwHfme
 SWGt6lYUkeSC0yxdylYtIvAKVhkSInkg0z7YiChB0eHflBgWsNn4r8v5iGk9yAXu
 keR9sQlXKS2gFbMtZ8e+VgNVqPmapJx+1E1F5/JbjVpiQG+fzsleHi9UF91pyLJL
 IGZM51l2FEMBMuKSNEUy+mcLX4Y/63iEg3fGvv5nX52A0MVrL47ADDJSEoaZoUpg
 Yz3AW/+yYKi5cmcZ7sUirrCHawvfIYGeR1jZjYaIk8lAeqjFHTDzayIXUoOoQfN7
 vi+fRCxYLA/Z/Rnfylmt
 =keMM
 -----END PGP SIGNATURE-----

Merge tag 'mfd-hwmon-leds-watchdog-v3.18' into hwmon-next

Immutable branch between MFD, HWMON, LEDs and Watchdog for v3.18
2014-09-24 09:25:06 -07:00
Andreas Werner 964356938f hwmon: (menf21bmc) Introduce MEN14F021P00 BMC HWMON driver
Added driver to support the 14F021P00 BMC Hardware Monitoring.
The BMC is a Board Management Controller including monitoring of the
board voltages.

Signed-off-by: Andreas Werner <andreas.werner@men.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-09-24 15:36:33 +01:00
Aravind Gopalakrishnan f89ce2706d hwmon: (k10temp) Add support for F15h M60h
This patch adds temperature monitoring support for F15h M60h processor.
 - Add new pci device id for the relevant processor
 - The functionality of REG_REPORTED_TEMPERATURE is moved to
   D0F0xBC_xD820_0CA4 [Reported Temperature Control]
   - So, use this to get CUR_TEMP value
   - Since we need an indirect register access, protect this with
     a mutex lock
 - Add Kconfig, Doc entries to indicate support for this processor.

Signed-off-by: Aravind Gopalakrishnan <aravind.gopalakrishnan@amd.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
[Guenter Roeck: Declare new mutex and function static]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-09-22 11:14:52 -07:00
Kamil Debski d82d57767c hwmon: Add pwm-fan driver
The pwm-fan driver enables control of fans connected to PWM lines.
This driver uses the PWM framework, so it is compatible with all
PWM devices that provide drivers through the PWM framework.

Signed-off-by: Kamil Debski <k.debski@samsung.com>
Reviewed-by: Varka Bhadram <varkabhadram@gmail.com>
Reviewed-by: Tobias Klauser <tklauser@distanz.ch>
[Guenter Roeck: Last argument to devm_of_pwm_get is pointer, use NULL]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-08-04 07:01:38 -07:00
Neelesh Gupta 24c1aa8587 hwmon: (powerpc/powernv) hwmon driver for power, fan rpm, voltage and temperature
This patch adds basic kernel support for reading power values, fan
speed rpm, voltage and temperature data on powernv platforms which
will be exported to user space through sysfs interface.

Test results:
-------------
[root@tul163p1 ~]# sensors
ibmpowernv-isa-0000
Adapter: ISA adapter
fan1:        5465 RPM  (min =    0 RPM)
fan2:        5152 RPM  (min =    0 RPM)
fan3:        5521 RPM  (min =    0 RPM)
fan4:        4891 RPM  (min =    0 RPM)
fan5:           0 RPM  (min =    0 RPM)
fan6:           0 RPM  (min =    0 RPM)
fan7:        7480 RPM  (min =    0 RPM)
fan8:        7944 RPM  (min =    0 RPM)
temp1:        +39.0°C  (high =  +0.0°C)
power1:      190.00 W

[root@tul163p1 ~]# ls /sys/devices/platform/
alarmtimer  ibmpowernv.0  power  rtc-generic  serial8250  uevent
[root@tul163p1 ~]# ls /sys/devices/platform/ibmpowernv.0/hwmon/hwmon0/
device	    fan2_min	fan4_min    fan6_min	fan8_min   power
fan1_fault  fan3_fault	fan5_fault  fan7_fault	in1_fault  power1_input
fan1_input  fan3_input	fan5_input  fan7_input	in2_fault  subsystem
fan1_min    fan3_min	fan5_min    fan7_min	in3_fault  temp1_input
fan2_fault  fan4_fault	fan6_fault  fan8_fault	in4_fault  temp1_max
fan2_input  fan4_input	fan6_input  fan8_input	name	   uevent
[root@tul163p1 ~]# ls /sys/class/hwmon/hwmon0/
device	    fan2_min	fan4_min    fan6_min	fan8_min   power
fan1_fault  fan3_fault	fan5_fault  fan7_fault	in1_fault  power1_input
fan1_input  fan3_input	fan5_input  fan7_input	in2_fault  subsystem
fan1_min    fan3_min	fan5_min    fan7_min	in3_fault  temp1_input
fan2_fault  fan4_fault	fan6_fault  fan8_fault	in4_fault  temp1_max
fan2_input  fan4_input	fan6_input  fan8_input	name	   uevent
[root@tul163p1 ~]#

Signed-off-by: Neelesh Gupta <neelegup@linux.vnet.ibm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-08-04 07:01:38 -07:00
Zhu, Richard \(NSN - CN/Beijing\) a8bfeceb0c hwmon: (pmbus) Add tps40422 front-end driver
For TI power management chip TPS40422, READ_TEMPERATURE_2 command is supported on
page 1 of the chip, but the original driver(pmbus.c) only tried to detect this command
on page 0, this will lead to a result that the temperature sensor in page 1 couldn't
be detected. This change is to isolate the tps40422 driver from pmbus.c into a solo
front-end driver.

Signed-off-by: Zhu Laiwen <richard.zhu@nsn.com>
[Guenter Roeck: Dropped unnecessary license text (fixes checkpatch warning)]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-08-04 07:01:38 -07:00
Guenter Roeck 05c77ab240 hwmon: (tmp421) Add support for TMP441 and TMP442
TMP441 and TMP442 are compatible to TMP421 and TMP422.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
2014-08-04 07:01:38 -07:00
Guenter Roeck a63ee9d83b hwmon: (tmp421) Strengthen detect function
Not all supported chips support the entire I2C address range.
Only accept specific chips at the addresses supported by that chip.
Check for invalid values in conversion rate and status registers.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
2014-08-04 07:01:37 -07:00
Johannes Pointner ed67f0872b hwmon: (ntc_thermistor) Support B57330V2103 from EPCOS
This patch adds support for the ntc thermistor B57330V2103 from EPCOS.

Signed-off-by: Johannes Pointner <johannes.pointner@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-08-04 07:01:35 -07:00
Frans Klaver c83959f89f hwmon: (lm75) Add support for TMP112
TMP112 is compatible to LM75.

Signed-off-by: Frans Klaver <frans.klaver@xsens.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-08-04 07:01:34 -07:00
Heiko Schocher d17a7dca04 hwmon: Driver for TI TMP103 temperature sensor
Driver for the TI TMP103.

The TI TMP103 is similar to the TMP102.  It differs from the TMP102
by having only 8 bit registers.

Signed-off-by: Heiko Schocher <hs@denx.de>
[linux@roeck-us.net: Select REGMAP_I2C in Kconfig]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-08-04 07:01:33 -07:00
Scott Kanowitz f4ff415564 hwmon: Add support for Lattice's POWR1220 power manager IC
This patch adds support for Lattice's POWR1220 power manager IC. Read
access to all the ADCs on the chip are supported through the hwmon
sysfs files.

Signed-off-by: Scott Kanowitz <skanowitz@echo360.com>
[Guenter Roeck: Removed some extra ( )]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-08-04 07:01:33 -07:00
Naveen Krishna Chatradhi 8b6f5e0f19 hwmon: (ntc_thermistor) Use the manufacturer name properly
Murata Manufacturing Co., Ltd is the vendor for
NTC (Negative Temperature coefficient) based Thermistors.
But, the driver extensively uses "NTC" as the vendor name.

This patch corrects the vendor name also updates the
compatibility strings according to the vendor-prefix.txt

Note: Drivers continue to support the previous compatible strings
but further addition of these compatible strings in device tree
is deprecated.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-06-25 07:09:13 -07:00
Tomas Pop 1a539d372e hwmon: add support for Sensirion SHTC1 sensor
Add support for Sensirion SHTC1 and compatible temperature and humidity
sensors.

Signed-off-by: Tomas Pop <tomas.pop@sensirion.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-06-12 08:36:48 -07:00
Linus Torvalds f456205265 New driver for NCT6683D
New chip support to existing drivers:
 	Add support for STTS2004 and AT30TSE004 to jc42 driver
 	Add support for EMC1402/EMC1412/EMC1422 to emc1403 driver
 
 Other notable changes:
 	Document hwmon kernel API
 	Convert jc42, lm70, lm75, lm77, lm83, lm92, max1619, tmp421,
 	and tmp102 drivers to use new hwmon API functions
 	Replace function macros in lm80, lm92, and jc42 drivers with
 	real code
 	Convert emc1403 driver to use regmap, add support for additional
 	attributes, and add device IDs for EMC1412, EMC1413, and EMC1414
 	Various additional cleanup and minor bug fixes in several drivers
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTjUZbAAoJEMsfJm/On5mBnY4P/A15UCpfNzNa/tYzHUYtb0/Y
 7yI6fEWhgSegiWuWl3I7jOJrz+uU2emrIdOVW1ci8Y7WNjoL+TWYTlvvwf0OYwMz
 k7duMcNWcIOzBAm+swyaKvPQjoLcxtKYn+pSCxb1dzVkjzpelnjHctBNnfbvrNQt
 FCMs+t2azIZGkgNf9G1U/uV702/vKKYWrBc69/EB3osDxSRLKvM2sPqnScxmBR6q
 oohZ5pxbpDhO0gXc9s7AprUFf4puMEWw6eul3QPMzBAgZqh44iOv+yNvJk6pjG5L
 FwWkand4U2BVMGY3+dnBCeA8fsYq9owPCK8WN+5NI1W+CLMnKQFHK4iOEDbiaSHH
 PsgGrFnj5ArVxcmPKUQ3l2nWQcwXUvuBTxRmc707HNLt93y2JrdIncdSnhNR5PVk
 nlUNwTXCqfQmv0aY/yTDIzrgYfXXxhngaw59kEZXBPyO7rH7IcXZw6sq/scn8+G3
 Nd8lHLaFOAZwZVNU1hUWkow88t/NwkW/CZ2c2796pjsjAuJfBS1P+C4hkkUQ7+QB
 SavLg8S9E+Ienxacx2tZs8OdcAXsvlrHMeM0TTiWLbKPosDz3FbwbPeqlCpcVQAY
 kSPIXA+l1Dps0v8Yf6pdJCL1eX1jyzdfA+YKMT0aCPALTQYEPQXAE4Nced+qCZ52
 1vm6eTqDAf1KQfOmxxxT
 =dytt
 -----END PGP SIGNATURE-----

Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging into next

Pull hwmon updates from Guenter Roeck:
 "New driver for NCT6683D

  New chip support to existing drivers:
   - add support for STTS2004 and AT30TSE004 to jc42 driver
   - add support for EMC1402/EMC1412/EMC1422 to emc1403 driver

  Other notable changes:
   - document hwmon kernel API
   - convert jc42, lm70, lm75, lm77, lm83, lm92, max1619, tmp421, and
     tmp102 drivers to use new hwmon API functions
   - replace function macros in lm80, lm92, and jc42 drivers with real
     code
   - convert emc1403 driver to use regmap, add support for additional
     attributes, and add device IDs for EMC1412, EMC1413, and EMC1414
   - various additional cleanup and minor bug fixes in several drivers"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (60 commits)
  hwmon: (nct6775) Fix probe unwind paths to properly unregister platform devices
  hwmon: (nct6683) Fix probe unwind paths to properly unregister platform devices
  hwmon: (ultra45_env) Introduce managed version of kzalloc
  hwmon: Driver for NCT6683D
  hwmon: (lm80) Rearrange code to avoid forward declarations
  hwmon: (lm80) Convert fan display function macros into functions
  hwmon: (lm80) Convert voltage display function macros into functions
  hwmon: (lm80) Convert temperature display function macros into functions
  hwmon: (lm80) Normalize all temperature values to 16 bit
  hwmon: (lm80) Simplify TEMP_FROM_REG
  hwmon: (lm83) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (lm83) Rearange code to avoid forward declarations
  hwmon: (lm83) Drop FSF address
  hwmon: (max1619) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (max1619) Drop function macros
  hwmon: (max1619) Rearrange code to avoid forward declarations
  hwmon: (max1619) Drop FSF address
  hwmon: (max1619) Fix critical alarm display
  hwmon: (jc42) Add support for STTS2004 and AT30TSE004
  hwmon: (jc42) Convert function macros into functions
  ...
2014-06-03 11:09:43 -07:00
Jean Delvare 0132514588 hwmon: Document temp[1-*]_min_hyst sysfs attribute
The temp[1-*]_min_hyst sysfs attribute is already implemented by 3
hwmon drivers (adt7x10, lm77 and lm92) but was missing from the
standard interface.

Also add temp[1-*]_lcrit_hyst for consistency, even though no driver
implement that one for the time being.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2014-05-25 17:23:07 +02:00
Guenter Roeck 41082d66bf hwmon: Driver for NCT6683D
Nuvoton NCT6683D is an eSIO with hardware monitoring capabilities.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21 16:02:27 -07:00
Guenter Roeck 175c490c9e hwmon: (jc42) Add support for STTS2004 and AT30TSE004
Also fix links to datasheets for other supported sensors from
ST Microelectronics, and add links to several Atmel datasheets.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21 16:02:25 -07:00
Guenter Roeck 84899d394e hwmon: (emc1403) Make all hyst attributes except for temp1_crit_hyst read-only
All chips in this chip series only support a single hysteresis value. Having
multiple writable hysteresis attributes is therefore confusing, since a single
write affects all hysteresis temperatures. Make all but one (temp1_crit_hyst)
read-only.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21 16:02:24 -07:00
Guenter Roeck 57d60b1b7e hwmon: (emc1403) Add driver documentation
With the driver now supporting several chip variants,
it is about time to document what is supported.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21 16:02:23 -07:00
Guenter Roeck a9622663e0 hwmon: Document hwmon kernel API
The hwmon subsystem has been around for a while. Time to document
its kernel API.

Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21 16:02:23 -07:00
Guenter Roeck 50bf46509f hwmon: (lm77) Do not preserve hysteresis when updating critical temp limit
Updating the hysteresis value when updating the critical temperature limit
was following the rule of 'least surprise'. However, it had the undesirable
side effect of changing the hysteresis for all other attributes, which
defeats the purpose of least surprise. In addition, it could result in
invalid hysteresis values if the resulting hysteresis was too large. In such
cases the resulting hysteresis ended up changed anyway, which again defeats
the purpose. So drop that code and document the new behavior.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21 16:02:20 -07:00
Linus Torvalds 3e76b749ea Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
Pull hwmon updates from Jean Delvare:
 "This includes a number of driver conversions to
  devm_hwmon_device_register_with_groups, a few cleanups, and
  support for the ITE IT8623E"

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: (it87) Add support for IT8623E
  hwmon: (it87) Fix IT8603E define name
  hwmon: (lm90) Convert to use hwmon_device_register_with_groups
  hwmon: (lm90) Create all sysfs groups in one call
  hwmon: (lm90) Always use the dev variable in the probe function
  hwmon: (lm90) Create most optional attributes with sysfs_create_group
  hwmon: Avoid initializing the same field twice
  hwmon: (pc87360) Avoid initializing the same field twice
  hwmon: (lm80) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (adm1021) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (lm63) Avoid initializing the same field twice
  hwmon: (lm63) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (lm63) Create all sysfs groups in one call
  hwmon: (lm63) Introduce 'dev' variable to point to client->dev
  hwmon: (lm63) Add additional sysfs group for temp2_type attribute
  hwmon: (f71805f) Fix author's address
2014-04-05 18:45:11 -07:00
Rudolf Marek 574e9bd8fa hwmon: (it87) Add support for IT8623E
Add support for the IT8623E found on Asus motherboards. It has same
hardware monitoring block as IT8603E.

Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
2014-04-04 18:01:35 +02:00
Aravind Gopalakrishnan ec0159503a hwmon: (k10temp) Add support for AMD F16 M30h processor
Adding new PCI ID to support AMD F16 M30h processor (Mullins).
While at it, modify Kconfig and Doc files to reflect the
support for newer processors

Note: PCI ID for this processor will make it into pci_ids.h
as part of this patch:
http://marc.info/?l=linux-kernel&m=139291362126057&w=2
which should be pulled into 3.15 when merge window opens
(It currently sits in 'for-next' branch of bp.git-
https://git.kernel.org/cgit/linux/kernel/git/bp/bp.git/log/?h=for-next)

Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-04-02 22:09:14 -07:00
Guenter Roeck f76992b00a hwmon: (pmbus/ltc2978) Add support for LTM4676
The chip's programming interface is quite similar to LTC3880
and supports the same set of sensors.

Reviewed-by: Robert Coulson <rob.coulson@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-03-19 18:59:40 -07:00
Guenter Roeck a41a8927e7 hwmon: (lm95245) Make temp2_crit_hyst read-only
The hysteresis register is shared among both temperature sensors.
This means changing one also affects the other. To avoid confusion,
established way to express this is to make only the first instance writable
and keep all other instances as read-only. Otherwise users may be
confused that changing the second writable value also affects the first,
while it is more obvious that a writable value may affect a different
read-only value.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
2014-03-03 08:01:06 -08:00
Guenter Roeck b4c9c1a798 hwmon: Driver for TI ADC128D818
ADC128D818 is a System Monitor with Temperature Sensor. It is similar to LM80
and LM96080, but has 16 bit wide sensor registers and no fan speed monitoring.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-03-03 08:01:04 -08:00
Guenter Roeck 6700ce035f hwmon: Driver for Linear Technologies LTC2945
LTC2945 is a system monitor that measures current, voltage, and power.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-03-03 08:01:03 -08:00
Guenter Roeck 69e1ded651 hwmon: Driver for Linear Technologies LTC4260
LTC4260 is a Positive Voltage Hot Swap Controller.
The driver currently only supports voltage monitoring, not voltage control.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-03-03 08:01:03 -08:00
Jean Delvare 7c81c60f37 Update Jean Delvare's e-mail address
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2014-01-29 20:40:08 +01:00
Rudolf Marek c145d5c628 hwmon: (it87) Add support for the ITE IT8603E
Add support for IT8603E.

This closes bug #57861:
https://bugzilla.kernel.org/show_bug.cgi?id=57861

[JD: Fixes and clean-ups.]

Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2014-01-29 20:40:08 +01:00
Linus Torvalds 16cd9d1c0f Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
Pull hwmon fixes and updates from Jean Delvare:
 "All lm90 driver fixes and improvements"

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  Documentation: dt: hwmon: Add OF document for LM90
  hwmon: (lm90) Add power control
  hwmon: (lm90) Add support for TI TMP451
  hwmon: (lm90) Use enums for the indexes of temp8 and temp11
  hwmon: (lm90) Add support to handle IRQ
  hwmon: (lm90) Define status bits
  hwmon: (lm90) Fix max6696 alarm handling
2013-11-15 16:35:10 -08:00
Wei Ni 1daaceb26d hwmon: (lm90) Add support for TI TMP451
TI TMP451 is mostly compatible with ADT7461, except for
local temperature low byte and max conversion rate.
Add support to the LM90 driver.

Signed-off-by: Wei Ni <wni@nvidia.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2013-11-15 10:40:39 +01:00
Guenter Roeck 3f08d7f49f hwmon: (pmbus/ltc2978): Add support for LTC2978A
Detect LTC2978A chip ID. Treat it as LC2978.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-10-18 09:12:03 -07:00
Guenter Roeck c24c407e96 hwmon: (pmbus/ltc2978): Add support for LTC2977
LTC2977 is a pin compatible replacement for LTC2978.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-10-18 09:12:03 -07:00
Guenter Roeck c8ccab7ab5 hwmon: (pmbus/lm25066) Add support for LM25063
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-10-18 09:12:02 -07:00
Linus Torvalds 7b4022fa17 Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
Pull hwmon fixes from Jean Delvare.

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: (emc6w201) Do not declare enum variable
  hwmon: (w83792d) Update module author
2013-09-07 10:54:19 -07:00
Linus Torvalds 2e515bf096 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree from Jiri Kosina:
 "The usual trivial updates all over the tree -- mostly typo fixes and
  documentation updates"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (52 commits)
  doc: Documentation/cputopology.txt fix typo
  treewide: Convert retrun typos to return
  Fix comment typo for init_cma_reserved_pageblock
  Documentation/trace: Correcting and extending tracepoint documentation
  mm/hotplug: fix a typo in Documentation/memory-hotplug.txt
  power: Documentation: Update s2ram link
  doc: fix a typo in Documentation/00-INDEX
  Documentation/printk-formats.txt: No casts needed for u64/s64
  doc: Fix typo "is is" in Documentations
  treewide: Fix printks with 0x%#
  zram: doc fixes
  Documentation/kmemcheck: update kmemcheck documentation
  doc: documentation/hwspinlock.txt fix typo
  PM / Hibernate: add section for resume options
  doc: filesystems : Fix typo in Documentations/filesystems
  scsi/megaraid fixed several typos in comments
  ppc: init_32: Fix error typo "CONFIG_START_KERNEL"
  treewide: Add __GFP_NOWARN to k.alloc calls with v.alloc fallbacks
  page_isolation: Fix a comment typo in test_pages_isolated()
  doc: fix a typo about irq affinity
  ...
2013-09-06 09:36:28 -07:00
Shane Huang f85b520510 hwmon: (w83792d) Update module author
w83792d was written by me in 2004, I'd like to update my first name
into my current one to keep consistent, and delete invalid address.

Signed-off-by: Shane Huang <shane.huang@amd.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2013-09-06 14:05:42 +02:00
William Markezana f060c658b8 hwmon: (htu21) Add Measurement Specialties HTU21D support
Signed-off-by: William Markezana <william.markezana@meas-spec.com>
[Guenter Roeck - minor formatting changes]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-08-29 09:09:12 -07:00
Wei Hu 30b146d1cb hwmon: (k10temp) Add support for Fam16h (Kabini)
The temperature reporting interface stays the same, so we just
add the PCI-ID to the list.

Verified on AMD Olive Hill.

Signed-off-by: Wei Hu <wei@aristanetworks.com>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-08-27 08:28:01 -07:00
Masanari Iida ac20ad14c3 doc: Fix typo "is is" in Documentations
Fix double words "is is" in Documentations.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Rob Landley <rob@landley.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-08-27 10:50:52 +02:00
Stefan Huber 780d7bd4eb Documentation/hwmon/abituguru-datasheet fix a typo
Corrected the word adventerous to adventurous.

Signed-off-by: Stefan Huber <steffhip@gmail.com>
Signed-off-by: Matthias Schid <aircrach115@gmail.com>
Signed-off-by: Simon Puels <simon.puels@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-08-20 12:41:10 +02:00
Evgeniy Dushistov 60c1f31fc5 hwmon: (ads1015) Add support for ADS1115
This patch adds support for ads1115 device to ads1015 driver.
Based on work of Emiliano Carnati <carnatiatebneuro.com>.
Tested on ARM CPU based board.

Signed-off-by: Evgeniy A. Dushistov <dushistov@mail.ru>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-08-11 22:10:40 -07:00
Linus Torvalds ddcf6600b1 New driver to support GMT G762/G763 pwm fan controllers
Add support for DS1631, DS1721, and DS1731 to ds1621 driver
 Remove detect function from ds1621 driver as unreliable
 Bug fixes in nct6775, iio_hwmon, and adm1021 drivers
 Remove redundant platform_set_drvdata in various drivers
 Add device tree support to ina2xx driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJR0I8LAAoJEMsfJm/On5mBPp8P+wedtxZpljmca+YnuBnZnnZN
 7HLFdGvbwOA+ThfYx7UhpyRgJ+D4ggB0jTiVCPHGUJzmwYjEVk5e9qZkIX/1fBIB
 Iun9TZdJPG+fYFkr8H91dnJcaeELog76yOvx3VRU1QYO11L1wx56oJ2b3a+lnIb5
 UNyovFhvJuZ4jDpzQNUGY5/CMScj2rtPiRPT5NC/3HoSmkXFuV1uw4nhn3C79ycR
 NoZFyjFi7J1hCTB7ExoHHSQBGdLFDXQiEZqNaQS4WXnW1jmiTsQl0rRLoP5KqUDU
 3NovVA557nOfOHAjB98nQrBM7Syn2jKYeZP+M5OR1iKIXxv5uUs/Ajmpnk5x2t1d
 Wf5uHW99SEDTn19U8icgOO4zLvNX0lSXHs+FC6hzKTpLp/FLVjP2uOYj9TcxtPzn
 pLAYsE5UIySH4ybJ0Jdf2pKA+8D2eAOVo1joFhaoz8qFjMNdSxBlf8/xOUsBaJoi
 dAQ/SmWc9z0Tk03Hxn1b/XVKHLbb3AIpPTe1PCK9bUBzLQyZp2UmBmSPHIVxdjO/
 zyRABp64pkoVMqomJPzujEgT2NaqSfr+wwLyUOPBtmaMM8N6aOUlRjrJyOHrSrmB
 3CTT23h8xp8lEgjezQ0jYlhNQPgpGmlu/yuFfL2GyqRw00clAkUem0BrstZg0EOD
 lepSJCaSpyqr3jfhIBwN
 =OdGw
 -----END PGP SIGNATURE-----

Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 - new driver to support GMT G762/G763 pwm fan controllers
 - add support for DS1631, DS1721, and DS1731 to ds1621 driver
 - remove detect function from ds1621 driver as unreliable
 - bug fixes in nct6775, iio_hwmon, and adm1021 drivers
 - remove redundant platform_set_drvdata in various drivers
 - add device tree support to ina2xx driver

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (ds1621) Fix temperature rounding operations
  hwmon: (nct6775) Drop unsupported fan alarm attributes for NCT6775
  hwmon: (nct6775) Fix temperature alarm attributes
  Add support for GMT G762/G763 PWM fan controllers
  hwmon: (ina2xx) Add device tree support to pass the shunt resistor
  hwmon: (ds1621) Update documentation
  hwmon: (ds1621) Add DS1731 chip support to ds1621 driver
  hwmon: (iio_hwmon) add alias table
  hwmon: (adm1021) Do not create min sysfs attributes for LM84
  hwmon: (ds1621) Remove detect function
  hwmon: (ds1621) Add ds1631 chip support to ds1621 driver and documentation
  hwmon: (ds1621) Add ds1721 update interval sysfs attribute
  hwmon: (ds1621) Add ds1721 chip support
  hwmon: (w83627ehf) Remove redundant platform_set_drvdata()
  hwmon: (ntc_thermistor) Remove redundant platform_set_drvdata()
  hwmon: (i5k_amb) Remove redundant platform_set_drvdata()
  hwmon: (coretemp) Remove redundant platform_set_drvdata()
  hwmon: (abituguru3) Remove redundant platform_set_drvdata()
2013-07-03 19:56:35 -07:00
Arnaud Ebalard 594fbe713b Add support for GMT G762/G763 PWM fan controllers
GMT G762/763 fan speed PWM controller is connected directly to a fan
and performs closed-loop or open-loop control of the fan speed. Two
modes - PWM or DC - are supported by the chip. Introduced driver
provides various knobs to control the operations of the chip (via
sysfs interface). Specific characteristics of the system can be passed
either using board init code or via DT. Documentation for both the
driver and DT bindings are also provided.

Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Tested-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-06-27 10:31:42 -07:00
Tang Yuantian 31e7ad74f6 hwmon: (ina2xx) Add device tree support to pass the shunt resistor
Adding another way that is device tree to pass the shunt resistor
value to driver except for platform data.

Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
[Guenter Roeck: Added missing of.h include]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-06-27 10:31:42 -07:00
Robert Coulson 87438c2c54 hwmon: (ds1621) Update documentation
Replace some written information with tables to improve readability
and to simplify adding newer devices in the future.

Signed-off-by: Robert Coulson <rob.coulson@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-06-27 10:31:40 -07:00
Robert Coulson 260f81ffc1 hwmon: (ds1621) Add DS1731 chip support to ds1621 driver
These changes add DS1731 chip support to the ds1621 driver,
Kconfig, and documentation.

Signed-off-by: Robert Coulson <rob.coulson@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-06-27 10:30:43 -07:00
Robert Coulson ed7c34e89d hwmon: (ds1621) Remove detect function
Due to a lack of device and vendor identification registers, the
Dallas/Maxim DS16xx devices cannot be uniquely detected, sometimes
resulting in false positives. Therefore, the detect function is
being removed in favor of explicit device instantiation.

Signed-off-by: Robert Coulson <rob.coulson@gmail.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-06-27 10:29:02 -07:00
Robert Coulson 79c1cc1c90 hwmon: (ds1621) Add ds1631 chip support to ds1621 driver and documentation
Add definitions, information, and code for ds1631 chip support
to the ds1621 driver.

Signed-off-by: Robert Coulson <rob.coulson@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-06-27 10:29:02 -07:00
Robert Coulson 3a8fe33155 hwmon: (ds1621) Add ds1721 update interval sysfs attribute
The ds1721 device can be configured for 9..12 bit resolutions;
add a sysfs attribute for userspace to configure this attribute.
The definition, description, details, and usage are shown in the
documentation and were crafted from an LM73 driver patch done by
Chris Verges & Guenter Roeck).

Signed-off-by: Robert Coulson <rob.coulson@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-06-27 10:29:01 -07:00
Robert Coulson cd6c8a4297 hwmon: (ds1621) Add ds1721 chip support
Update the ds1621 documentation, driver, and Kconfig with
ds1721 chip support.

Signed-off-by: Robert Coulson <rob.coulson@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-06-27 10:28:59 -07:00
Stephen Rothwell 40b313608a Finally eradicate CONFIG_HOTPLUG
Ever since commit 45f035ab9b ("CONFIG_HOTPLUG should be always on"),
it has been basically impossible to build a kernel with CONFIG_HOTPLUG
turned off.  Remove all the remaining references to it.

Cc: Russell King <linux@arm.linux.org.uk>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03 14:20:18 -07:00
Jean Delvare 3fbc81e3c0 hwmon: (lm75) Add support for the Dallas/Maxim DS7505
Basically it's the same as the original DS75 but much faster.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
2013-05-04 14:49:36 +02:00
Jean Delvare 0cd2c72d76 hwmon: (lm75) Tune resolution and sample time per chip
Most LM75-compatible chips can either sample much faster or with a
much better resolution than the original LM75 chip. So far the lm75
driver did not let the user take benefit of these improvements. Do it
now.

I decided to almost always configure the chip to use the best
resolution possible, which also means the longest sample time. The
only chips for which I didn't are the DS75, DS1775 and STDS75, because
they are really too slow in 12-bit mode (1.2 to 1.5 second worst case)
so I went for 11-bit mode as a more reasonable tradeoff. This choice is
dictated by the fact that the hwmon subsystem is meant for system
monitoring, it has never been supposed to be ultra-fast, and as a
matter of fact we do cache the sampled values in almost all drivers.

If anyone isn't pleased with these default settings, they can always
introduce a platform data structure or DT support for the lm75. That
being said, it seems nobody ever complained that the driver wouldn't
refresh the value faster than every 1.5 second, and the change made
it faster for all chips even in 12-bit mode, so I don't expect any
complaint.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
2013-05-04 14:49:36 +02:00
Linus Torvalds 151173e8ce Highlights:
- OpenFirmware/DeviceTree support for the Power Supply core: the core now
   automatically populates supplied_from hierarchy from the device tree.
   With these patches chargers and batteries can now lookup each other
   without the board files support shim. Rhyland Klein at NVIDIA did the
   work;
 
 - New ST-Ericsson ABX500 hwmon driver. The driver is heavily using the
   AB85xx core and depends on some recent changes to it, so that is why the
   driver comes through the battery tree. It has an appropriate ack from
   the hwmon maintainer (i.e. Guenter Roeck). Martin Persson at ST-Ericsson
   and Hongbo Zhang at Linaro authored the driver;
 
 - Final bits to sync AB85xx ST-Ericsson changes into mainline. The changes
   touch mfd parts, but these were acked by the appropriate MFD maintainer
   (i.e. Samuel Ortiz). Lee Jones at Linaro did most of the work and lead
   the submission process.
 
 Minor changes, but still worth mentioning:
 
 - Battery temperature reporting fix for Nokia N900 phones;
 - Versatile Express poweroff driver moved into drivers/power/reset/.
 - Tree-wise: use devm_kzalloc() where appropriate;
 - Tree-wise: dev_pm_ops cleanups/fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJRf1BPAAoJEGgI9fZJve1bwyoP/3Gv+qStzbN7mUtIVEvH3EAe
 aVJwlODFzEZjk5xoiw7Dc8PuBE8O948hWOnQyCuUQ8+OfK6SyNIjexPYy3Z25a0F
 cX9JMj7rtPWHvxo2q/YuKwBPZoxj/JIPyxwUT7akwXoHAV059fvcy9R1DfFX2Qur
 hSP0NXTg+guvEpxGV4bC2l+LWZPmDFK9n0RsorttYaBvsiRDWl0c2TY2byofYlBw
 ++m/rI8Qgl8db8pKq/WDue62HtMt3kmZj6ZIgej3Wb0+GIRmYHMyPIyAkf82Wlw2
 g2sGNPT7cstrSNOozegzJ7UghJObcYDFf10NCgvFMNjmAT1dAwdneQHEWy6Ek7pT
 9X3e0LmaFqVbufFp4xFiLkMutsCLLTnGyXIbzs7RkTm3XBVIUqiDWtI6I6X44ohG
 6PJn8vUlufu7owXrqFpgSBar2U1vfoQdhInmz4hbQeff0qn2nX/BGNwhxYptZ549
 TudsI9WGzJ6fvYQ56zh6+BfiA0FmjhUiSKOtrXImrhxE6gUf3IOJyMQlkxLx5t8D
 uuhBmO0J6kDi2lqF6alOEo+UDefJj4mUJn2tnIdis90+lNQlSV02GEtiwFT1zt1z
 LFW0xshQkxZ4lMa28h35FB1/Z11ApUOe4Es+OKADDJhAnxdZzXcAwIRyPRRPgdsy
 jTnJno+Kxk9wXLcekxVE
 =5BdE
 -----END PGP SIGNATURE-----

Merge tag 'for-v3.10' of git://git.infradead.org/battery-2.6

Pull battery updates from Anton Vorontsov:
 "Highlights:

   - OpenFirmware/DeviceTree support for the Power Supply core: the core
     now automatically populates supplied_from hierarchy from the device
     tree.  With these patches chargers and batteries can now lookup
     each other without the board files support shim.  Rhyland Klein at
     NVIDIA did the work

   - New ST-Ericsson ABX500 hwmon driver.  The driver is heavily using
     the AB85xx core and depends on some recent changes to it, so that
     is why the driver comes through the battery tree.  It has an
     appropriate ack from the hwmon maintainer (i.e.  Guenter Roeck).
     Martin Persson at ST-Ericsson and Hongbo Zhang at Linaro authored
     the driver

   - Final bits to sync AB85xx ST-Ericsson changes into mainline.  The
     changes touch mfd parts, but these were acked by the appropriate
     MFD maintainer (ie Samuel Ortiz).  Lee Jones at Linaro did most of
     the work and lead the submission process.

  Minor changes, but still worth mentioning:

   - Battery temperature reporting fix for Nokia N900 phones
   - Versatile Express poweroff driver moved into drivers/power/reset/
   - Tree-wide: use devm_kzalloc() where appropriate
   - Tree-wide: dev_pm_ops cleanups/fixes"

* tag 'for-v3.10' of git://git.infradead.org/battery-2.6: (112 commits)
  pm2301-charger: Fix suspend/resume
  charger-manager: Use kmemdup instead of kzalloc + memcpy
  power_supply: Populate supplied_from hierarchy from the device tree
  power_supply: Add core support for supplied_from
  power_supply: Define Binding for power-supplies
  rx51_battery: Fix reporting temperature
  hwmon: Add ST-Ericsson ABX500 hwmon driver
  ab8500_bmdata: Export abx500_res_to_temp tables for hwmon
  ab8500_{bmdata,fg}: Add const attributes to some data arrays
  ab8500_bmdata: Eliminate CamelCase warning of some variables
  ab8500_btemp: Make ab8500_btemp_get* interfaces public
  goldfish_battery: Use resource_size()
  lp8788-charger: Use PAGE_SIZE for the sysfs read operation
  max8925_power: Use devm_kzalloc()
  da9030_battery: Use devm_kzalloc()
  da9052-battery: Use devm_kzalloc()
  ds2760_battery: Use devm_kzalloc()
  ds2780_battery: Use devm_kzalloc()
  gpio-charger: Use devm_kzalloc()
  isp1704_charger: Use devm_kzalloc()
  ...
2013-04-30 15:15:24 -07:00
Guenter Roeck 29dd3b64b9 hwmon: (tmp401) Add support for TMP432
TMP432 is similar to TMP431 with a second external temperature sensor.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2013-04-21 08:56:48 -07:00
Hongbo Zhang 0bbb06ed56 hwmon: Add ST-Ericsson ABX500 hwmon driver
Each of ST-Ericsson X500 chip set series consists of both ABX500 and DBX500
chips. This is ABX500 hwmon driver, where the abx500.c is a common layer for
all ABX500s, and the ab8500.c is specific for AB8500 chip. Under this designed
structure, other chip specific files can be added simply using the same common
layer abx500.c.

Signed-off-by: Hongbo Zhang <hongbo.zhang@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-04-16 18:27:52 -07:00
Masanari Iida 1754e4c5c7 documentation: hwmon: Fix typo in documentation/hwmon
Correct spelling typo in Documentation/hwmon

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-12 18:24:09 -07:00
Guenter Roeck 2c7fd30da2 hwmon: (nct6775) Expand scope of supported chips
NCT6775, NCT6776, and NCT6779 have a number of variants with the same
chip ID but different chip labels. Add text "or compatible" to the
message displayed when the driver is loaded and rephrase the Kconfig
entry to reflect that it also supports compatible chips.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:42 -07:00
Guenter Roeck e1eb49063b hwmon: Add driver for LM95234
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:42 -07:00
Guenter Roeck a1fac92b8b hwmon: (tmp401) Add support for TMP431
TMP431 is compatible to TMP401.

Also add support for additional I2C addresses supported by TMP411B
and TMP411C.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2013-04-07 21:16:42 -07:00
Guenter Roeck 58615a94f6 hwmon: (pmbus/lm25066) Add support for LM25056
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:41 -07:00
Guenter Roeck a7c69118bd hwmon: (pmbus/lm25066) Report VAUX as vmon
So far the driver reported the voltage on VAUX as "vout2". This was not
entirely appropriate as it is not an output voltage, and complicates
the code. Use the new virtual "VMON" register set and report the voltage
as "vmon" instead.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:41 -07:00
Guenter Roeck fd9175d2f6 hwmon: (pmbus/ltc2978) Add support for LTC2974 and LTC3883
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:41 -07:00
Guenter Roeck 8c770f3a47 hwmon: (pmbus/ltc2978) Clean up documentation
Some sysfs attributes are only supported on LTC2978 and not on LTC3880.
Update documentation to reflect which attributes are supported for which chips.

Output current attributes supported on LTC3880 were described as providing
input current values. Fix text to reflect that the attributes provide output
current values.

"reset history" attribute descriptions were misleading and seemed to imply
that all history was reset when writing a single attribute. Replace with more
accurate text.

Replace 'internal temperature" with "chip temperature". Temperature limits
not only apply to the chip temperature, but also to external temperatures
on LTC3880, so remove the word "chip" from the attribute description.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:41 -07:00
Guenter Roeck bbd8decd41 hwmon: (nct6775) Add support for weighted fan control
The NCT677X series support weighted fan control. In this mode, a secondary
temperature source is used in addition to the primary temperature source to
control fan speed. Add support for this feature.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:39 -07:00
Guenter Roeck cdcaeceb74 hwmon: (nct6775) Add support for automatic fan control
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:39 -07:00
Guenter Roeck 77eb5b3703 hwmon: (nct6775) Add support for pwm, pwm_mode, and pwm_enable
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:39 -07:00
Guenter Roeck 1c65dc365e hwmon: (nct6775) Add support for fan speed attributes
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:39 -07:00
Guenter Roeck 9de2e2e84e hwmon: Driver for Nuvoton NCT6775F, NCT6776F, and NCT6779D
This driver will replace the w83627ehf driver for NCT6775F and NCT6776F,
and provides support for NCT6779D.

This patch provides support for voltage monitor attributes.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:38 -07:00
Lars-Peter Clausen 51c2a4871c hwmon: (adt7410) Add support for the adt7310/adt7320
The adt7310/adt7320 is the SPI version of the adt7410/adt7420. The register map
layout is a bit different, i.e. the register addresses differ between the two
variants, but the bit layouts of the individual registers are identical. So both
chip variants can easily be supported by the same driver. The issue of non
matching register address layouts is solved by a simple look-up table which
translates the I2C addresses to the SPI addresses.

The patch moves the bulk of the adt7410 driver to a common module that will be
shared by the adt7410 and adt7310 drivers. This common module implements the
driver logic and uses a set of virtual functions to perform IO access. The
adt7410 and adt7310 driver modules provide proper implementations of these IO
accessor functions for I2C respective SPI.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:38 -07:00
Jean Delvare 25eba81b7f hwmon: (lm75) Fix tcn75 prefix
The TCN75 has its own prefix for a long time now.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2013-03-18 21:19:49 +01:00
Jean Delvare ab302bb0b8 hwmon: (adt7410) Document ADT7420 support
The adt7410 driver supports the ADT7420, but its documentation file
makes no mention of that. Add this refrence, and a brief a description
of the differences between the ADT7410 and the ADT7420.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-03-03 21:45:48 -08:00
Guenter Roeck 6d21a41656 hwmon: (pmbus/ltc2978) Update datasheet links
Links to datasheets are no longer valid. Provide links to product information
instead (which provides links to the datasheets and is hopefully more
persistent).

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2013-03-03 21:45:47 -08:00
Guenter Roeck e3333e572f hwmon: Update my e-mail address in driver documentation
Most of the hwmon driver documentation still listed my old invalid e-mail
address. Fix it.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2013-03-03 21:45:47 -08:00
Guenter Roeck d476828037 hwmon: (jc42) Add support for MCP98244
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
2013-02-06 09:58:07 -08:00
Guenter Roeck 50115ac9b6 hwmon: (pmbus/max34440) Add support for MAX34460 and MAX34461
MAX34460 is a PMBus 12-Channel Voltage Monitor & Sequencer.
MAX34461 is a PMBus 16-Channel Voltage Monitor & Sequencer.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06 09:58:06 -08:00
Guenter Roeck 1640eaecc4 hwmon: (pmbus/zl6100) Add support for VMON/VDRV
Some of the ZL6100 compatible chips support monitoring a separate voltage pin,
VMON (ZL2004) or VDRV (ZL91xx). Report it as in2 / vmon.

The chips support implicit warning limits for VMON/VDRV, as percentage of the
respective critical voltage. Support by reading/writing the critical voltages
and calculating the associated warning voltages.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06 09:58:05 -08:00
Guenter Roeck ceeadc5c51 hwmon: Driver for Texas Instruments INA209
Add support for the TI / Burr-Brown INA209 voltage / current / power
monitor.

Cc: Paul Hays <haysp@magma.net>
Cc: Ira W. Snyder <iws@ovro.caltech.edu>
Tested-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06 09:57:59 -08:00
Chris Verges 2bf9233a10 hwmon: (lm73) Add support for max/min alarms
Add support for temp1_min_alarm and temp1_max_alarm

Signed-off-by: Chris Verges <kg4ysn@gmail.com>
[linux@roeck-us.net: cleanup; dropped platform data and interrupt support]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06 09:57:58 -08:00
Chris Verges 8c14d126ae hwmon: (lm73) Add 'update_interval' attribute
The LM73 supports four A/D conversion resolutions.  The default used by
the existing lm73 driver is the chip's default, 11-bit (0.25 C/LSB).
This patch enables changing of this resolution from userspace via the
update_interval sysfs attribute.  Full details on usage are included in
Documentation/hwmon/lm73.

Signed-off-by: Chris Verges <kg4ysn@gmail.com>
[linux@roeck-us.net: cleanup]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06 09:57:57 -08:00
Guenter Roeck b06367070d hwmon: (it87) Add support for IT8771E and IT8772E
Assume that IT8771E and IT8772E are fully compatible with IT8728F.

IT8771E support contributed by Kelly Anderson.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
2013-02-06 09:57:56 -08:00
Guenter Roeck 5372d2d71c hwmon: Driver for Maxim MAX6697 and compatibles
Add support for MAX6581, MAX6602, MAX6622, MAX6636, MAX6689, MAX6693,
MAX6694, MAX6697, MAX6698, and MAX6699 temperature sensors

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
2013-02-06 09:57:56 -08:00
Guenter Roeck 9e3970fba9 hwmon: (coretemp) Document and add support for additional CPU models
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-01-25 21:03:55 -08:00
Guenter Roeck c25fb81629 hwmon: Retire SENSORS_LIMIT
SENSORS_LIMIT and clamp_val have the same functionality, so retire SENSORS_LIMIT
as it is no longer needed.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2013-01-25 21:03:54 -08:00
Guenter Roeck 5d8d2f2bdb hwmon: (it87) Report thermal sensor type as Intel PECI if appropriate
IT8721 and IT8728 support Intel PECI temperature reporting. Each sensor
can be programmed to display the temperature reported on the PECI interface.

If configured for Intel PECI, the driver reported the wrong sensor type for
the respective thermal sensor. Fix the code to correctly report it as
"Intel PECI (6)".

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-12-19 22:17:02 +01:00
Guenter Roeck 161d898ac9 hwmon: (it87) Introduce support for tempX_offset sysfs attribute
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-12-19 22:17:01 +01:00
Linus Torvalds a2013a13e6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial branch from Jiri Kosina:
 "Usual stuff -- comment/printk typo fixes, documentation updates, dead
  code elimination."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  HOWTO: fix double words typo
  x86 mtrr: fix comment typo in mtrr_bp_init
  propagate name change to comments in kernel source
  doc: Update the name of profiling based on sysfs
  treewide: Fix typos in various drivers
  treewide: Fix typos in various Kconfig
  wireless: mwifiex: Fix typo in wireless/mwifiex driver
  messages: i2o: Fix typo in messages/i2o
  scripts/kernel-doc: check that non-void fcts describe their return value
  Kernel-doc: Convention: Use a "Return" section to describe return values
  radeon: Fix typo and copy/paste error in comments
  doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c
  various: Fix spelling of "asynchronous" in comments.
  Fix misspellings of "whether" in comments.
  eisa: Fix spelling of "asynchronous".
  various: Fix spelling of "registered" in comments.
  doc: fix quite a few typos within Documentation
  target: iscsi: fix comment typos in target/iscsi drivers
  treewide: fix typo of "suport" in various comments and Kconfig
  treewide: fix typo of "suppport" in various comments
  ...
2012-12-13 12:00:02 -08:00
Linus Torvalds 698d601224 ARM: arm-soc: driver specific changes
A collection of mostly SoC-specific driver updates:
 - a handful of pincontrol and setup changes
 - new drivers for hwmon and reset controller for vexpress
 - timing support updates for OMAP (gpmc and other interfaces)
 - + a collection of smaller cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQySxPAAoJEIwa5zzehBx3NbgP/iI1EFKI8fK6tp7F1EeTwDYK
 tKeKFmx+Lio2z5OF0CS0qK0HODtcS2ifJ5Zz3C9VyiRBNDOuYAvDT+5bIAKsKIo3
 p0mZyYvgdbcxH30EhYY8klaUVwRyc1noxdO8vENdzoAik4EwUv5zXEKAlcBfScrA
 usCW0dhGJYKH73kgLKQvsyE9d/aV0hbcniSYoVHH1G4e6U5vG45y8pqeSrTQxfCP
 nG177/AheoCHoyoh/td0lmkAJsmXM7NpvdJTaAwKgOmEXvOCUwAcuOgOCEuc7sd/
 FG3jGLntcB9z0AtbO/YOl3+110o71KBF7gYrDDEjLD6U7zz7yhcmhGVh+FEnVa0I
 ppgReNN3jZOs7HVlDTvTXLdh5cjZU5JIpLOmHWdERAwkxakDCd07KzPo5g44XTyO
 CzZuqVFU2JNliIujoJHL2Trnj7Q54fWcgHWkWJdWBhJMsxC42xWgaukCaLDHNuBX
 Po5cqOnEnAYA0rgvQxfdfPWzJd/NN/kU/ewun0pwni3+PlzhfxFzTRcLcj4BT4By
 1S2foQUt0CVkswgFdkRlbGolSsXIlOQmKvsd8kvzldDUzn+0cxgwYHzg4T29hlmY
 zv0+sfgSxub68zfodDtdyjBWDCgrSHrf3TGjGD/4/X6Bm9Ss3hRj4LHIM7Z2BX7F
 PJgvGjAZIfuZThLkShLa
 =CwMf
 -----END PGP SIGNATURE-----

Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver specific changes from Olof Johansson:
 "A collection of mostly SoC-specific driver updates:
   - a handful of pincontrol and setup changes
   - new drivers for hwmon and reset controller for vexpress
   - timing support updates for OMAP (gpmc and other interfaces)
   - plus a collection of smaller cleanups"

* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
  ARM: ux500: fix pin warning
  ARM: OMAP2+: tusb6010: generic timing calculation
  ARM: OMAP2+: smc91x: generic timing calculation
  ARM: OMAP2+: onenand: generic timing calculation
  ARM: OMAP2+: gpmc: generic timing calculation
  ARM: OMAP2+: gpmc: handle additional timings
  ARM: OMAP2+: nand: remove redundant rounding
  gpio: samsung: use pr_* instead of printk
  ARM: ux500: fixup magnetometer pins
  ARM: ux500: add STM pin configuration
  ARM: ux500: 8500: add pinctrl support for uart1 and uart2
  ARM: ux500: cosmetic fixups for uart0
  gpio: samsung: Fix input mode setting function for GPIO int
  ARM: SAMSUNG: Insert bitmap_gpio_int member in samsung_gpio_chip
  ARM: ux500: 8500: define SDI sleep states
  ARM: vexpress: Reset driver
  ARM: ux500: 8500: update SKE keypad pinctrl table
  hwmon: Versatile Express hwmon driver
  ARM: ux500: delete duplicate macro
  ARM: ux500: 8500: add IDLE pin configuration for SPI
  ...
2012-12-13 10:59:11 -08:00
Ashish Jangam e597022353 hwmon: DA9055 HWMON driver
This is the HWMON patch for DA9055 PMIC and has got dependency on the
DA9055 MFD core.

This patch monitors the DA9055 PMIC's ADC channels vddout, junction temperature
and auxiliary channels.

This patch is functionally tested on Samsung SMDKV6410.

Signed-off-by: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
[Guenter Roeck: Dropped __devinit, __devexit, __devexit_p]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-12-05 10:55:55 -08:00
Guenter Roeck 04a87a0fbe hwmon: (coretemp) List TjMax for Z650/670 and N550/570
as per processor data sheets.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-12-05 10:55:55 -08:00
Guillaume Roguez 0962e0f1a5 hwmon: (ads7828) add support for ADS7830
The ADS7830 device is almost the same as the ADS7828,
except that it does 8-bit sampling, instead of 12-bit.
This patch extends the ads7828 driver to support this chip.

Signed-off-by: Guillaume Roguez <guillaume.roguez@savoirfairelinux.com>
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-12-05 10:55:54 -08:00
Vivien Didelot 46d7846292 hwmon: (ads7828) driver cleanup
As there is no reliable way to identify the chip, it is preferable to
remove the detect callback, to avoid misdetection.

Module parameters are not worth it here, so let's get rid of them and
add an ads7828_platform_data structure instead.

Clean the code by removing unused macros, fixing coding style issues,
avoiding function prototypes and using convenient macros such as
module_i2c_driver().

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-12-05 10:55:54 -08:00
Masanari Iida 02582e9bcc treewide: fix typo of "suport" in various comments and Kconfig
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-19 14:16:09 +01:00
Arnd Bergmann 8dbd2879e3 Merge branch 'omap/dt' into next/drivers
Needed for the omap timer changes.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-11-15 17:41:21 +01:00
Andreas Herrmann d034fbf08b hwmon, fam15h_power: Change email address, MAINTAINERS entry
Signed-off-by: Andreas Herrmann <herrmann.der.user@googlemail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-10-29 17:48:01 -07:00
Arnd Bergmann 9628d85975 Merge branch 'vexpress-drivers' of git://git.linaro.org/people/pawelmoll/linux into next/drivers
Versatile Express changes from Pawel Moll <pawel.moll@arm.com>:

* 'vexpress-drivers' of git://git.linaro.org/people/pawelmoll/linux:
  ARM: vexpress: Reset driver
  hwmon: Versatile Express hwmon driver

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-10-26 15:29:40 +02:00
Pawel Moll 48ed887724 hwmon: Versatile Express hwmon driver
hwmon framework driver for Versatile Express sensors, providing
information about board level voltage (only when regulator driver
is not configured), currents, temperature and power/energy usage.
Labels for the values can be defined as DT properties.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
2012-10-16 17:12:35 +01:00
Guenter Roeck 1102dcab84 hwmon: (coretemp) Add support for Atom CE4110/4150/4170
TjMax for the CE4100 series of Atom CPUs was previously reported to be
110 degrees C.

cpuinfo logs on the web show existing CPU types CE4110, CE4150, and CE4170,
reported as "model name : Intel(R) Atom(TM) CPU CE41{1|5|7}0 @ 1.{2|6}0GHz"
with model 28 (0x1c) and stepping 10 (0x0a). Add the three known variants
to the tjmax table.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
cc: stable@vger.kernel.org
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-10-14 15:21:33 -07:00
Kees Cook 07d3360063 Documentation/hwmon: remove CONFIG_EXPERIMENTAL
This config item has not carried much meaning for a while now and is
almost always enabled by default. As agreed during the Linux kernel
summit, remove it.

CC: Jean Delvare <khali@linux-fr.org>
CC: Guenter Roeck <linux@roeck-us.net>
CC: Rob Landley <rob@landley.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-10-14 15:21:33 -07:00
Linus Torvalds a3920a6efa Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull ACPI & Thermal updates from Len Brown:
 "The generic Linux thermal layer is gaining some new capabilities
  (generic cooling via cpufreq) and some new customers (ARM).

  Also, an ACPI EC bug fix plus a regression fix."

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (30 commits)
  tools/power/acpi/acpidump: remove duplicated include from acpidump.c
  ACPI idle, CPU hotplug: Fix NULL pointer dereference during hotplug
  cpuidle / ACPI: fix potential NULL pointer dereference
  ACPI: EC: Add a quirk for CLEVO M720T/M730T laptop
  ACPI: EC: Make the GPE storm threshold a module parameter
  thermal: Exynos: Fix NULL pointer dereference in exynos_unregister_thermal()
  Thermal: Fix bug on cpu_cooling, cooling device's id conflict problem.
  thermal: exynos: Use devm_* functions
  ARM: exynos: add thermal sensor driver platform data support
  thermal: exynos: register the tmu sensor with the kernel thermal layer
  thermal: exynos5: add exynos5250 thermal sensor driver support
  hwmon: exynos4: move thermal sensor driver to driver/thermal directory
  thermal: add generic cpufreq cooling implementation
  Fix a build error.
  thermal: Fix potential NULL pointer accesses
  thermal: add Renesas R-Car thermal sensor support
  thermal: fix potential out-of-bounds memory access
  Thermal: Introduce locking for cdev.thermal_instances list.
  Thermal: Unify the code for both active and passive cooling
  Thermal: Introduce simple arbitrator for setting device cooling state
  ...
2012-10-13 11:27:59 +09:00
Peter Meerwald 4d7e47bc83 hwmon: Fix spelling of Celsius
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-10-10 15:25:56 +02:00
Oleksij Rempel 9292f05556 hwmon: Update Alexey Fisher's name
My name was change after migration.

Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-10-10 15:25:56 +02:00
Len Brown 29b19e2504 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux into thermal
Conflicts:
	drivers/staging/omap-thermal/omap-thermal-common.
		OMAP supplied dummy TC1 and TC2,
		at the same time that the thermal tree removed them
		from thermal_zone_device_register()

	drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c
		propogate the upstream MAX_IDR_LEVEL re-name
			to prevent a build failure

	Previously-fixed-by: Stephen Rothwell <sfr@canb.auug.org.au>

Signed-off-by: Len Brown <len.brown@intel.com>
2012-10-09 01:35:52 -04:00
Amit Daniel Kachhap c48cbba6fe hwmon: exynos4: move thermal sensor driver to driver/thermal directory
This movement is needed because the hwmon entries and corresponding sysfs
interface is a duplicate of utilities already provided by
driver/thermal/thermal_sys.c.  The goal is to place it in thermal folder
and add necessary functions to use the in-kernel thermal interfaces.

Signed-off-by: Amit Daniel Kachhap <amit.kachhap@linaro.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: SangWook Ju <sw.ju@samsung.com>
Cc: Durgadoss <durgadoss.r@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2012-09-24 14:44:38 +08:00
Sven Schuchmann 592758b12f hwmon: (mcp3021) Add MCP3221 support
This Patch adds support for mcp3221 chip to the
mcp3021 driver.

Signed-off-by: Sven Schuchmann <schuchmann@schleissheimer.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-09-23 21:08:36 -07:00
Guenter Roeck dc92cd0c13 hwmon: (ina2xx) Add support for INA220 and INA230
INA220 is register compatible to INA219, and INA230 is register compatible to
INA226, so all we need to do is to add name aliases for those two chips.

Cc: Lothar Felten <l-felten@ti.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
2012-09-23 21:08:35 -07:00
Christophe Leroy a86e94dc94 hwmon: (lm70) Add support for LM71 and LM74
Add support for LM74 and LM71 to LM70 driver.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-09-23 21:08:34 -07:00
Christophe Leroy 146ab288bb hwmon: (lm70) Allow 4wire SPI bus with LM70
Removing the 3wire limitation on LM70 as the component also allows
operation on 4wire SPI bus

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-09-23 21:08:34 -07:00
Vivien Didelot 6c1fe725fd hwmon: add Maxim MAX197 support
The MAX197 is an A/D converter, made by Maxim. This driver currently
supports the MAX197, and MAX199. They are both 8-Channel, Multi-Range,
5V, 12-Bit DAS with 8+4 Bus Interface and Fault Protection.

The available ranges for the MAX197 are {0,-5V} to 5V, and {0,-10V} to
10V, while they are {0,-2V} to 2V, and {0,-4V} to 4V on the MAX199.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-09-23 21:08:33 -07:00
Hartmut Knaack 983b97bed2 hwmon: Driver for ADT7410
This patch brings basic support for the Analog Devices ADT7410 temperature
sensor. The following functionality has been implemented:

  * get current temperature
  * get/set minimum, maximum and critical temperature
  * get/set hysteresis
  * get alarm events for minimum, maximum and critical temperature

All implemented sysfs attributes have been sucessfully tested at temperatures
of 15°C to 40°C.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-09-23 21:08:33 -07:00
Iain Paton 27f8b13555 hwmon: Honeywell Humidicon HIH-6130/HIH-6131 humidity and temperature sensor driver
This is a new driver for the Honeywell Humidicon HIH-6130/HIH-6131 humidity sensor.

The driver is based on the existing Sensiron sht21 driver with the necessary changes
to the probe, update_measurements and conversion functions necessary to use the
Honeywell sensors.

There's no difference between the 6130 & 6131 other than the 6131 having an external
condensation filter attached.

Signed-off-by: Iain Paton <ipaton0@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-07-21 21:48:44 -07:00
Guenter Roeck 3fafb0ce92 hwmon: Document the use of devres functions
devres functions are the preferred means to allocate resources in hwmon drivers.
Document it.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-07-21 21:48:41 -07:00
Ashish Jangam e41f6432d1 hwmon: Driver for DA9052/53 PMIC
The DA9052 PMIC provides an Analogue to Digital Converter with 10 bits
resolution and 10 channels.

This patch monitors the DA9052 PMIC's ADC channels mostly for battery
parameters like battery temperature, junction temperature, battery
current etc.

This patch is functionally tested on Samsung SMDKV6410

Signed-off-by: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
[Guenter Roeck: __init --> __devinit for probe function]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-07-21 21:48:37 -07:00
Guenter Roeck 813441f16e hwmon: (coretemp) Document TjMax for 3rd generation i5/i7 processors
Tjmax values from Intel datasheets.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-06-17 18:05:06 +02:00
Guenter Roeck 5592906f8b hwmon: (coretemp) Add support for Atom D2000 and N2000 series CPU models
Document the Atom series D2000 and N2000 (Cedar Trail) as being supported.
List and set TjMax for those series.

Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: "R, Durgadoss" <durgadoss.r@intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-06-17 18:05:05 +02:00
Jean Delvare fcc14ac1a8 hwmon: (coretemp) Improve support of recent Atom CPU models
Document the new Atom series (Tunnel Creek and Medfield) as being
supported, and list TjMax for the Atom E600 series.

Also enable the Atom tjmax heuristic for these Atom CPU models.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Reviewed-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Alexander Stein <alexander.stein@systec-electronic.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: "R, Durgadoss" <durgadoss.r@intel.com>
2012-06-17 18:05:05 +02:00
Linus Torvalds 1259f6ee15 hwmon updates for 3.5-rc1
New driver for INA219 and INA226, added support for IT8782F and IT8783E/F to
 it87 driver, plus cleanups in a couple of drivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJPu7QNAAoJEMsfJm/On5mB/roP/1l+TKHZiUcOfoBDXIqkX18d
 8XlJywnidCtPPo4dDvssXy3MVFBb/OtIggh58ya2fmibVHdYgQMTaK+ryGYMPE6z
 5iKb7PnkBV8BzP4NiEITHYciExpEJyarl4I0Pu1Z3zgef7AB4u0JHRD7j+c18GNX
 gQuFcu39qHQxw08EmsHTnR9jKwdfladiI3xNcVzKsC6ycUq8jMP/81vNkxTkkhbP
 yZDww+AtLUHzZfiF4t8beB7n9z+u/grMLtmvurW7UUor7A/VCt2JhzD1txvG+mOP
 YHWzkcBvrYbZocb5mP+ULH9ONny4nMErUY+cSxym+5G3CNsymZxD1RqWfTfMHF21
 LVqaGOmU9PNj2GcAhV2karJQ3APVJZFocTaJpmzYtMFkGofoKdlyqV+/Hop4jqyV
 44grojWL3uh5LtOdqKy68qn/BvFEi6gEMx9f094rTDdFRTycLNBXktcGXfubK0y8
 +hUYzFWuSYjAmYHNMXrbUAH80F2/vu4cd4h3LviPfwi/BSWk78EhBfKujjhdTcDM
 /ramG3Z+2qbA6p6wZ6nwTSNSKiDkBfuf+G6dLGCaJHrPqhokAtVq8uQW5aYNTVe4
 Ihe9uPqU/UF10SkFSWyqu2FytsFJ9BDxx8LL4Rsfugka2UgvIE6WPrhIJpvJUbFE
 kXcf0Xre4HBcNjQvuGOF
 =ZX6H
 -----END PGP SIGNATURE-----

Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 "New driver for INA219 and INA226, added support for IT8782F and
  IT8783E/F to it87 driver, plus cleanups in a couple of drivers."

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (it87) Make temp3 attribute conditional for IT8782F
  hwmon: (it87) Convert to use devm_kzalloc and devm_request_region
  hwmon: INA219 and INA226 support
  hwmon: (it87) Create voltage attributes only if voltage is enabled
  hwmon: (ntc_thermistor) Fix checkpatch warning
  hwmon: (ntc_thermistor) Optimize and fix build warning
  hwmon: (ntc_thermistor) Return error code from hwmon_device_register
  hwmon: (ntc_thermistor) Convert to devm_kzalloc
  hwmon: (ad7314) Remove unused defines, and rename OFFSET to SHIFT
  acpi_power_meter: clean up code around setup_attrs
  acpi_power_meter: drop meter_rw_attrs, use common meter_attrs
  acpi_power_meter: remove duplicate code between register_{ro,rw}_attrs
  acpi_power_meter: use a {RW,RO}_SENSOR_TEMPLATE macro to clean things up
  acpi_power_meter: use the same struct {rw,ro}_sensor_template for both
  hwmon: use module_pci_driver
  hwmon: (it87) Add support for IT8782F and IT8783E/F
2012-05-23 14:15:09 -07:00
Felten, Lothar f7c2fe386a hwmon: INA219 and INA226 support
Add support for the Texas Instruments INA219 and INA226 power monitors.

Signed-off-by: Lothar Felten <l-felten@ti.com>
[guenter.roeck@ericsson.com: formatting cleanup; check for smbus word data;
 select PGA=8 for INA219]
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-05-22 06:48:02 -07:00
Guenter Roeck 0531d98b1f hwmon: (it87) Add support for IT8782F and IT8783E/F
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-05-20 19:41:48 -07:00
Masanari Iida c94bed8e19 Documentation: Fix typo in multiple files in Documentation
Correct multiple spelling typo in Documentation.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Rob Landley <rob@landley.net>
Reported-by: Anders Larsen <al@alarsen.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-16 14:37:13 +02:00
Jiri Kosina e75d660672 Merge branch 'master' into for-next
Merge with latest Linus' tree, as I have incoming patches
that fix code that is newer than current HEAD of for-next.

Conflicts:
	drivers/net/ethernet/realtek/r8169.c
2012-04-08 21:48:52 +02:00
Thomas Weber 91fe4d508f Fix typo milivolt => millivolt
Signed-off-by: Thomas Weber <thomas@tweber.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-05 16:58:23 -07:00
Andre Przywara fbc729a446 hwmon: (k10temp) Add support for AMD Trinity CPUs
The on-chip northbridge's temperature sensor of the upcoming
AMD Trinity CPUs works the same as for the previous CPUs.
Since it has a different PCI-ID, we just add the new one to the list
supported by k10temp.
This allows to use the k10temp driver on those CPUs.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Cc: stable@vger.kernel.org # 3.0+
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-04-01 10:25:56 -07:00
Xie Xiaobo 5510e62a66 hwmon: Add MCP3021 ADC driver
Add I2C driver for MCP3021 that is an ADC chip from Microchip.
The MCP3021 is a successive approximation A/D converter (ADC)
with 10-bit resolution.
The driver export the value of Vin to sysfs, the voltage unit is
mV. Through the sysfs interface, lm-sensors tool can also display
Vin voltage.

Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-03-23 10:02:20 +01:00
Uwe Kleine-Koenig 0c2732152a hwmon: (mc13783-adc) Add support for the MC13892 PMIC
Based on a patch by David Jander that mostly did s/mc13783/mc13xxx/ .

Additionally use dev_get_drvdata instead of to_platform_device +
platform_get_drvdata in mc13783_adc_read (spotted by Jean Delvare).

Cc: David Jander <david.jander@protonic.nl>
Signed-off-by: Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-03-23 10:02:19 +01:00
Guenter Roeck ae544f64cc hwmon: (lm90) Add support for GMT G781
GMT G781 is a ADM1032-compatible temperature sensor chip.
Add support to the LM90 driver.

Cc: Mike Gorchak <lestat@i.com.ua>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-03-23 10:02:18 +01:00
Linus Torvalds 31f6765266 hwmon changes for v3.4
Mostly cleanup. No new drivers this time around, but support for several chips
 added to existing drivers: TPS40400, TPS40422, MTD040, MAX34446, ZL9101M,
 ZL9117M, and LM96080. Also, added watchdog support for SCH56xx, and additional
 attributes for a couple of drivers.
 
 312869e hwmon: (sch56xx) Add support for the integrated watchdog (v2)
 840e191 hwmon: (w83627ehf) Add support for temperature offset registers
 86dda17 hwmon: (jc42) Remove unnecessary device IDs
 3360a10 hwmon: (zl6100) Add support for ZL9101M and ZL9117M
 9271126 hwmon: (adm1275) Add support for ADM1075
 590defe hwmon: (max34440) Add support for MAX34446
 60b873e hwmon: (pmbus) Add more virtual registers
 2163340 hwmon: (pmbus) Add support for Lineage Power MDT040
 c5f35c9 hwmon: (pmbus) Add support for TI TPS40400 and TPS40422
 56aad5d hwmon: (max34440) Add support for 'lowest' output voltage attribute
 f15df57 hwmon: (jc42) Convert to use devm_kzalloc
 918ddef hwmon: (max16065) Convert to use devm_kzalloc
 b8a5a7c hwmon: (smm665) Convert to use devm_kzalloc
 3683928 hwmon: (ltc4261) Convert to use devm_kzalloc
 dd285ad hwmon: (pmbus) Simplify remove functions
 8b313ca hwmon: (pmbus) Convert pmbus drivers to use devm_kzalloc
 07404aa hwmon: (lineage-pem) Convert to use devm_kzalloc
 f352df6 hwmon: (hwmon-vid) Fix checkpatch issues
 3230f70 hwmon: (hwmon-vid) Add new entries to VRM model table
 9908ad4 hwmon: (lm80) Add detection of NatSemi/TI LM96080
 0e190b7 hwmon: (lm87) Get rid of macro-generated functions
 8652a26 hwmon: (lm87) Reorganize the code
 0fc86ec hwmon: (applesmc) Silence uninitialized warnings
 7599d32 hwmon: (lm70) Fix: do not use assignment in if condition
 e200c14 hwmon: (lm70) Register hwmon device after creating attribute files, and remove it first
 01d9def hwmon: (w83l786ng) Fix multi-line comments
 130067d hwmon: (w83l785ts) Fix multi-line comments
 7950133 hwmon: (w83781d) Fix: do not use assignment in if condition
 aff6e00 hwmon: (w83781d) Fix multi-line comments
 2a52dd6 hwmon: (smsc47b397) Fix multi-line comments
 36564ef hwmon: (pc87427) Fix multi-line comments
 b6707b7 hwmon: (max1668) Fix multi-line comments
 1160631 hwmon: (lm80) Fix multi-line comments
 bf0f3a0 hwmon: (emc2103) Fix multi-line comments
 fbb6670 hwmon: (adm1031) Fix multi-line comments
 94b991d hwmon: (adm1029) Fix multi-line comments
 27b9de3 hwmon: (w83627hf) Fix checkpatch issues
 ca3ccad hwmon: (w83l786ng) Fix checkpatch issues
 47efe87 hwmon: (w83793) Fix checkpatch issues
 d174368 hwmon: (w83792d) Fix checkpatch issues
 2185696 hwmon: (vt1211) Fix: do not use assignment in if condition
 b162c03 hwmon: (vt1211) Fix checkpatch issues
 9004ac8 hwmon: (via686a) Fix checkpatch issues
 bce2778 hwmon: (pc87360) Fix: do not use assignment in if condition
 449a7a0 hwmon: (pc87360) Fix checkpatch issues
 8958dfb hwmon: (max1619): Fix checkpatch issues
 09770b2 hwmon: (lm85) Fix checkpatch issues
 9b03079 hwmon: (lm78) Fix checkpatch issues
 02fe2fd hwmon: (lm77) Fix checkpatch issues
 f445a9a hwmon: (gl520sm) Fix: do not use assignment in if condition
 43da3d1 hwmon: (gl520sm) Fix checkpatch issues
 228f8e0 hwmon: (gl518sm) Fix checkpatch issues
 c8de836 hwmon: (dme1737) Fix checkpatch issues
 8c10369 hwmon: (asb100): Fix checkpatch issues
 c387e4e hwmon: (adm9240) Fix checkpatch issues
 86aa3e2 hwmon: (adm1026) Fix checkpatch issues
 21d2a8f hwmon: (adm1021) Fix checkpatch issues
 1bd385d hwmon: (abituguru) Fix checkpatch issues
 8969e84 hwmon: (w83627ehf) Fix multi-line comments
 51683ee hwmon: (max1111) Fix multi-line comments
 1b05d22 hwmon: (ltc4151) Fix multi-line comments
 1b9c491 hwmon: (g760a) Fix multi-line comments
 20eaf72 hwmon: (f71882fg) Fix multi-line comments
 4bebced hwmon: (emc1403) Fix multi-line comments
 ca3c7b6 hwmon: (amc6821) Fix multi-line comments
 10775d1 hwmon: (ads7871) Fix multi-line comments
 d13d623 hwmon: (ads7828) Fix multi-line comments
 562fca2 hwmon: (abituguru3) Fix multi-line comments
 ec1c319 hwmon: (w83791d) Fix checkpatch issues
 a80b10c hwmon: (ultra45_env) Fix checkpatch issues
 4d387df hwmon: (thmc50) Fix checkpatch issues
 85a0c0d hwmon: (smsc47m1) Fix checkpatch issues
 7e61268 hwmon: (smsc47m1) Fix: do not use assignment in if condition
 7cc3cb6 hwmon: (smsc47m192) Fix checkpatch issues
 8fda79e hwmon: (sis5595) Fix checkpatch issues
 5725608 hwmon: (pcf8591) Fix checkpatch issues
 2804a4c hwmon: (lm93) Fix checkpatch issues
 a318afd hwmon: (lm92) Fix checkpatch issues
 073f1e6c hwmon: (lm87) Fix: do not use assignment in if condition
 c6370db hwmon: (lm87) Fix checkpatch issues
 525ad37 hwmon: (fschmd) Fix checkpatch issues
 f24d548 hwmon: (atxp1) Fix checkpatch issues
 724cc33 hwmon: (adt7462) Fix checkpatch issues
 790fa38 hwmon: (ltc4215) Fix multi-line comments
 430b4fc hwmon: (ltc4245) Fix multi-line comments
 a68abd3 hwmon: (wm8350-hwmon) Constify fixed string array
 85ebfd3 hwmon: (applesmc) Fix multi-line comments
 75bdc93 hwmon: (asus_atk0110) Fix multi-line comments
 3c4c497 hwmon: (it87) Constify fixed string arrays
 8deeac8 hwmon: (ad7414) Fix multi-line comments
 5d577db hwmon: (jc42) Fix multi-line comments
 780affe hwmon: (coretemp) Fix checkpatch error
 3af2861 hwmon: (pc87360) Fix multi-line comments
 07de3df hwmon: (wm831x-hwmon) Fix multi-line comments
 3c22e23 hwmon: (smm665) Fix checkpatch error
 3c56b06 hwmon: (asc7621) Fix multi-line comments
 4a0d71c hwmon: (it87) Fix multi-line comments
 86d566e hwmon: (hwmon-vid) Fix multi-line comments
 5ed0488 hwmon: (hwmon) Fix multi-line comments
 19f2c05 hwmon: (ds1621) Fix checkpatch issues
 91efffe hwmon: convert drivers/hwmon/* to use module_spi_driver()
 f0967ee hwmon: convert drivers/hwmon/* to use module_i2c_driver()
 61ba031 hwmon: (vt8231) Fix multi-line comments
 9ed5bc2 hwmon: (adt7475) Fix multi-line comments
 2fff084 hwmon: (f71805f) Fix checkpatch issues
 703af96 hwmon: (max6650) Fix multi-line comments
 c531eb3 hwmon: (w83781d) Fix checkpatch issues
 2b22de5 hwmon: (adm1025) Fix checkpatch issues
 7973841 hwmon: (abituguru3) Fix checkpatch issues
 65fe5c7 hwmon: (vt8231) Fix checkpatch issues
 bafda5d hwmon: (max6650) Fix checkpatch issues
 0117c3f hwmon: (pmbus) Replace strict_strtol with kstrtol
 b3789a0 hwmon: (lm83) fix checkpatch issues
 93092a6 hwmon: (k8temp) fix checkpatch issues
 96585f1 hwmon: (lm80) reset device if error occurred
 6a9e7c4c hwmon: (lm80) fix checkpatch warnings
 6b904b6 hwmon: (adt7470) fix checkpatch issues
 e6a83db hwmon: (adt7411) fix checkpatch issues
 56c24af hwmon: (lm70) fix checkpatch issues
 1dc3708 hwmon: (f71882fg) fix checkpatch issues
 c6e8ac0 hwmon: (asus_atk0110) fix checkpatch issues
 99b8c83 hwmon: (adt7475) fix checkpatch issues
 b2ae8f8 hwmon: (smm665) fix checkpatch issues
 c9e1498 hwmon: (sht15) fix checkpatch issues
 0910b28 hwmon: (ibmaem) fix checkpatch issues
 dcb7cb9 hwmon: (ad7414) fix checkpatch issues
 e91aef2 hwmon: (ad7418) fix checkpatch issues
 5996542 hwmon: (w83l785ts) fix checkpatch issues
 a6100f6 hwmon: (wm831x-hwmon) fix checkpatch issues
 839a9ee hwmon: fix checkpatch issues
 08f5090 hwmon: (adm1029) fix checkpatch issues
 4d7c5d4 hwmon: (g760a) fix checkpatch issues
 7b102ed hwmon: (i5k_amb) fix checkpatch issues
 600151b hwmon: use DEFINE_PCI_DEVICE_TABLE
 7fe83ad hwmon: remove () used with return
 a6bee4a hwmon: (amc6821) fix initialisation
 2faaa93 hwmon: (lm80) add error handling
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJPaJBFAAoJEMsfJm/On5mBhkMP/09vlmsG7J3TLHcSKYJBkvSx
 6VNOOJgPqnvF71Az0dX47SU3zVXhG3I7dZufd/hqOK+0CNylSB7OSZMcWvBTduea
 0hDLTYj++SyVDQfVXb3zCVLU/wAE3YuXB3umWPwAKit4s2wAYYRDVCjwK96B88rv
 llNvo6JryuJDBUq7xiEmr0vKWMO0mKwwjpMTGCD3NpzK02ZV49T0gM94xa4gi5nM
 QAhNeO1AzQTx0+mBSRlq+SBBLSiXQmHcNrhnxcRMPha1bEi1D+QESozsczr+9/lz
 8vuTIULOIZxafM4XkBsZdknvlZnYrA6ukituDfVfiYQVcljO/cNu+seutFQDCMJe
 1zTDoNGIAwwnw0sAWWmTQwUMi+GSvlaL20gmm8FhTlvQaj9hNETsPYxEvPEsBNY1
 ICCixZcwpa1mZBXmryz2btf8az0OlX/sApzyHiq24B7lSE5Fv4tBDtwypLRu5N8m
 C4oNXC2dqDU0gtVxzO5Lavu6LHWV9lhyZvRPO75+zxYt4i5cnO04GTAYWh46aOzO
 DAZcs8M2Rj++dI5VW9Vl0k8hP9eWjxtPJFhNv/OWTx4YYQRICrde+j7QZcikIUWF
 0bzYI/zeIcwOg059vhnglBFM3mr7Z92jm4mftcNaSj/zuUHbWf6AQLbIq86Zq7tF
 3Eru3WuTZTwAkyNAVWd5
 =cUoW
 -----END PGP SIGNATURE-----

Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon changes for v3.4 from Guenter Roeck:
 "Mostly cleanup.  No new drivers this time around, but support for
  several chips added to existing drivers: TPS40400, TPS40422, MTD040,
  MAX34446, ZL9101M, ZL9117M, and LM96080.  Also, added watchdog support
  for SCH56xx, and additional attributes for a couple of drivers."

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (137 commits)
  hwmon: (sch56xx) Add support for the integrated watchdog (v2)
  hwmon: (w83627ehf) Add support for temperature offset registers
  hwmon: (jc42) Remove unnecessary device IDs
  hwmon: (zl6100) Add support for ZL9101M and ZL9117M
  hwmon: (adm1275) Add support for ADM1075
  hwmon: (max34440) Add support for MAX34446
  hwmon: (pmbus) Add more virtual registers
  hwmon: (pmbus) Add support for Lineage Power MDT040
  hwmon: (pmbus) Add support for TI TPS40400 and TPS40422
  hwmon: (max34440) Add support for 'lowest' output voltage attribute
  hwmon: (jc42) Convert to use devm_kzalloc
  hwmon: (max16065) Convert to use devm_kzalloc
  hwmon: (smm665) Convert to use devm_kzalloc
  hwmon: (ltc4261) Convert to use devm_kzalloc
  hwmon: (pmbus) Simplify remove functions
  hwmon: (pmbus) Convert pmbus drivers to use devm_kzalloc
  hwmon: (lineage-pem) Convert to use devm_kzalloc
  hwmon: (hwmon-vid) Fix checkpatch issues
  hwmon: (hwmon-vid) Add new entries to VRM model table
  hwmon: (lm80) Add detection of NatSemi/TI LM96080
  ...
2012-03-21 10:37:25 -07:00
Linus Torvalds 69a7aebcf0 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree from Jiri Kosina:
 "It's indeed trivial -- mostly documentation updates and a bunch of
  typo fixes from Masanari.

  There are also several linux/version.h include removals from Jesper."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (101 commits)
  kcore: fix spelling in read_kcore() comment
  constify struct pci_dev * in obvious cases
  Revert "char: Fix typo in viotape.c"
  init: fix wording error in mm_init comment
  usb: gadget: Kconfig: fix typo for 'different'
  Revert "power, max8998: Include linux/module.h just once in drivers/power/max8998_charger.c"
  writeback: fix fn name in writeback_inodes_sb_nr_if_idle() comment header
  writeback: fix typo in the writeback_control comment
  Documentation: Fix multiple typo in Documentation
  tpm_tis: fix tis_lock with respect to RCU
  Revert "media: Fix typo in mixer_drv.c and hdmi_drv.c"
  Doc: Update numastat.txt
  qla4xxx: Add missing spaces to error messages
  compiler.h: Fix typo
  security: struct security_operations kerneldoc fix
  Documentation: broken URL in libata.tmpl
  Documentation: broken URL in filesystems.tmpl
  mtd: simplify return logic in do_map_probe()
  mm: fix comment typo of truncate_inode_pages_range
  power: bq27x00: Fix typos in comment
  ...
2012-03-20 21:12:50 -07:00
Hans de Goede 312869ec93 hwmon: (sch56xx) Add support for the integrated watchdog (v2)
Add support for the watchdog integrated into the SMSC SCH5627 and
SCH5636 superio-s. Since the watchdog is part of the hwmon logical device
and thus shares ioports with it, the watchdog driver is integrated into the
existing hwmon drivers for these.

Note that this version of the watchdog support for sch56xx superio-s
implements the watchdog chardev interface itself, rather then relying on
the recently added watchdog core / watchdog_dev. This is done because
currently some needed functionality is missing from watchdog_dev, as soon
as this functionality is added (which is being discussed on the
linux-watchdog mailinglist), I'll convert this driver over to using
watchdog_dev.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[guenter.roeck@ericsson.com: Added missing linux/slab.h include]
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-03-20 06:42:05 -07:00
Guenter Roeck 86dda17634 hwmon: (jc42) Remove unnecessary device IDs
We don't really use or need separate device IDs for the various JC42.4 compliant
chips, so remove them and just stick with jc42.

Also update a datasheet references for SE98A, STTS424, and STTS424E02.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-03-18 18:27:53 -07:00
Guenter Roeck 3360a106f8 hwmon: (zl6100) Add support for ZL9101M and ZL9117M
ZL9101M and ZL9117M are compatible to ZL6100. Add support to the zl6100 driver.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-03-18 18:27:53 -07:00
Guenter Roeck 9271126966 hwmon: (adm1275) Add support for ADM1075
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-03-18 18:27:52 -07:00
Guenter Roeck 590defe59e hwmon: (max34440) Add support for MAX34446
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-03-18 18:27:52 -07:00
Guenter Roeck 216334094a hwmon: (pmbus) Add support for Lineage Power MDT040
MDT040 is supported by the generic PMBus driver. Add device ID and reference to
datasheet. Also mention Lineage Power device support in Kconfig.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-03-18 18:27:50 -07:00
Guenter Roeck c5f35c9d82 hwmon: (pmbus) Add support for TI TPS40400 and TPS40422
TPS40400 and TPS40422 are supported by the generic PMBus driver.
Add device IDs and data sheet references.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-03-18 18:27:50 -07:00
Guenter Roeck 56aad5d143 hwmon: (max34440) Add support for 'lowest' output voltage attribute
MAX34440 and compatibles support reporting the lowest measured output voltage.
Add support for it.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-03-18 18:27:49 -07:00
Jean Delvare 9908ad4cd4 hwmon: (lm80) Add detection of NatSemi/TI LM96080
Add detection of the National Semiconductor (now Texas Instruments)
LM96080. It is functionally compatible with the LM80 but detection is
completely different.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-03-18 18:27:43 -07:00
Guenter Roeck fecfb64422 hwmon: (zl6100) Enable interval between chip accesses for all chips
Intersil reports that all chips supported by the zl6100 driver require
an interval between chip accesses, even ZL2004 and ZL6105 which were thought
to be safe.

Reported-by: Vivek Gani <vgani@intersil.com>
Cc: stable@vger.kernel.org # 3.2+
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-03-14 09:17:03 -07:00
Guenter Roeck c43524b580 hwmon: (w83627ehf) Describe undocumented pwm attributes
Add description of pwm[1-4]_start_output, pwm[1-4]_step_output,
pwm[1-4]_stop_output, and pwm[1-4]_max_output attributes to driver
documentation.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-03-13 03:48:07 -07:00
Jean Delvare aacb6b0052 hwmon: (w83627ehf) Fix temp2 source for W83627UHG
Properly set the source of temp2 for the W83627UHG. Also fix a
comment right before that, and document the W83627UHG as reporting up
to 3 temperatures.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-03-13 03:30:56 -07:00
Guenter Roeck 1bd612a258 hwmon: (jc42) Add support for AT30TS00, TS3000GB2, TSE2002GB2, and MCP9804
Also update IDT datasheet locations.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org # 3.0+
Acked-by: Jean Delvare <khali@linux-fr.org>
2012-03-07 09:48:44 -08:00
Jean Delvare 4de86126a7 hwmon: (jc42) Add support for ST Microelectronics STTS2002 and STTS3000
These are fully compatible with Jedec JC 42.4 as far as I can see.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: stable@vger.kernel.org # 3.0+
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-03-07 09:48:21 -08:00
Masanari Iida 40e47125e6 Documentation: Fix multiple typo in Documentation
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-07 16:08:24 +01:00
Guenter Roeck 5f8b1f877e hwmon: (sysfs-interface) Update tempX_type attribute to be more generic
The temp[1-*]_type attribute reports the temperature sensor type. Sensor type 1
is described as "PII/Celeron Diode", which is quite restrictive; other CPUs
may also have an embedded temperature sensor diode with similar characteristics.
Change description to "CPU embedded diode" to be more generic.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-01-16 22:51:48 +01:00
Jean Delvare 16b5dda22e hwmon: (it87) Add IT8728F support
Until we get a datasheet for the IT8728F, treat it as fully compatible
with the IT8721F, as it seems to work reasonably well.

This closes kernel bug #27262.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-16 22:51:48 +01:00
Jean Delvare d216f6809e hwmon: (lm63) Expose automatic fan speed control lookup table
The LM63 and compatible devices have a lookup table to control the fan
speed automatically. Expose it in sysfs. Values are cached for 5
seconds, independently of the other register values to avoid slowing
down "sensors". We might make the table values writable in the future.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-16 22:51:47 +01:00
Jean Delvare 409c0b5bdf hwmon: (lm63) LM64 has a dedicated pin for tachometer
On the LM64, the tachometer function has a dedicated pin and fan speed
monitoring is always enabled.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-16 22:51:46 +01:00
Guenter Roeck f496b2d4f1 hwmon: (lm63) Add sensor type attribute for external sensor on LM96163
On LM96163, the external temperature sensor type is configurable to
either a thermal diode or a 3904 transistor. The chip reports a wrong
temperature if misconfigured. Add writable attribute to support it.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-01-16 22:51:46 +01:00
Guenter Roeck 04738b2b2f hwmon: (lm63) Add support for update_interval sysfs attribute
The update interval is configurable on LM63 and compatibles. Add
support for it.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-01-16 22:51:46 +01:00
Guenter Roeck 210961c436 hwmon: (lm63) Add support for LM96163
LM96163 is an enhanced version of LM63 with improved PWM resolution. Add chip
detection code as well as support for improved PWM resolution if the chip is
configured to use it.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-01-16 22:51:45 +01:00
Guenter Roeck 443830f6fd hwmon: (pmbus/zl6100) Add support for Ericsson BMR45[0,1] and BMR46[2,3,4]
Add support for Ericsson BMR450, BMR451, BMR462, BMR463, and BMR464, which are
based on ZL2005 and ZL2008, to zl6100 driver. Remove BMR450 and BMR451 device
IDs from generic PMBus driver.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2012-01-05 08:19:28 -08:00
Guenter Roeck bc581e6fcc hwmon: (pmbus/zl6100) Add support for ZL2005
Add explicit support for ZL2005. Functionality is almost the same as with other
Zilker Labs / Intersil chips, but limit register detection does not work reliably.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2012-01-05 08:19:27 -08:00
Jean Delvare eff7687d47 hwmon: (w83627ehf) Add support for the W83627UHG
This is essentially a stripped down version of the W83627DHG. Noticeable
difference is that it is still powered with +5V, as older models, even
though the ADC resolution is 8 mV as newer models have.

Thanks to Ulf Bruman (Saab Group) for doing all the testing.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-11-04 12:00:48 +01:00
Jean Delvare 426343ef34 hwmon: (lm75) Document why clones are not detected
Explain why clones of the LM75 are generally not detected by the
driver, and why this isn't going to change. Also update the
documentation to reflect the list of chip names currently supported by
the driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-10-24 11:09:47 -07:00
Michael Hennerich e96f9d89e6 hwmon: (lm75) Add support for Analog Devices ADT75
Add datasheet reference and device ID for ADT75.

The ADT75, like some other LM75 derivatives, needs to be instantiated
using methods 1, 2, or 4.
For more information see Documentation/i2c/instantiating-devices.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-10-24 11:09:45 -07:00
Guenter Roeck bc365a7f3c hwmon: (pmbus) Add support for Lineage Power DC-DC converters
Add device IDs and reference to datasheets for Lineage Power DC-DC converters.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-10-24 11:09:44 -07:00
Guenter Roeck ddfb41ca2a hwmon: (pmbus/ltc2978) Add support for LTC3880 to LTC2978 driver
The LTC3880 PMBus command set is comparable to LTC2978. Add support for it
to the LTC2978 driver.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-10-24 11:09:43 -07:00
Guenter Roeck c3ff9a674c hwmon: (pmbus/ltc2978) Explicit driver for LTC2978
Provide explicit driver for LTC2978 to enable support for minimum and peak
attributes. Remove ltc2978 chip id from generic pmbus driver.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-10-24 11:09:42 -07:00
Jonathan Cameron 4f3a659581 hwmon: AD7314 driver (ported from IIO)
Driver for AD7314, ADT7301, and ADT7302, ported from IIO.

Currently dropped power down mode support.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
[guenter.roeck@ericsson.com: Added MODULE_DEVICE_TABLE]
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-10-24 11:09:41 -07:00
Guenter Roeck 200855e52d hwmon: (pmbus) Add support for Intersil power management chips
Add support for Intersil / Zilker Labs ZL2004, ZL2006, ZL2008, ZL2105, ZL2106,
ZL6100, and ZL6105.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-10-24 11:09:40 -07:00
Guenter Roeck ced29d4225 hwmon: (pmbus) Provide more documentation
Provide more documentation describing PMBus driver functionality and the API
between the PMBus core driver and PMBus chip drivers.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-10-24 11:09:38 -07:00
Donggeun Kim 9d97e5c81e hwmon: Add driver for EXYNOS4 TMU
This patch allows to read temperature
from TMU(Thermal Management Unit) of SAMSUNG EXYNOS4 series of SoC.

Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-10-24 11:09:35 -07:00
Guenter Roeck 5cf231a346 hwmon: (pmbus/adm1275) Add support for ADM1276
ADM1276 is mostly compatible to ADM1275, with added support for input power
measurement. Add support for it to the ADM1275 driver.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-10-24 11:09:35 -07:00
Guenter Roeck c5e6763667 hwmon: (pmbus/adm1275) Add support for second current limit
ADM1275 supports a second current limit, which can be configured as either lower
or upper limit. Add support for it and report it as either lower or upper
critical current limit.

Also replace error return code EINVAL for unsupported pages with ENXIO as this
is more appropriate for the observed condition.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-10-24 11:09:34 -07:00
Guenter Roeck f4af6fd6e2 hwmon: (coretemp) Don't use threshold registers for tempX_max
With commit c814a4c7c4, the meaning of tempX_max
was changed. It no longer returns the value of bits 8:15 of
MSR_IA32_TEMPERATURE_TARGET, but instead returns the value of CPU threshold
register T1. tempX_max_hyst was added to reflect the value of temperature
threshold register T0.

As it turns out, T0 and T1 are used on some systems, presumably by the BIOS.
Also, T0 and T1 don't have a well defined meaning. The thresholds may be used
as upper or lower limits, and it is not guaranteed that T0 <= T1. Thus, the new
attribute mapping does not reflect the actual usage of the threshold registers.
Also, register contents are changed during runtime by an entity other than the
hwmon driver, meaning the values cached by the driver do not reflect actual
register contents.

Revert most of c814a4c7c4 to address the problem.
Support for T0 and T1 will be added back in with a separate commit, using new
attribute names.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Durgadoss R <durgadoss.r@intel.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-09-21 17:25:18 -07:00
Jean Delvare a45a8c8571 hwmon: (coretemp) Let the user force TjMax
On old CPUs (and even some recent Atom CPUs) TjMax can't be read from
the CPU registers, so it is guessed by the driver using a complex
heuristic which isn't reliable. So let users who know their CPU's
TjMax pass it as a module parameter.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: "R, Durgadoss" <durgadoss.r@intel.com>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Alexander Stein <alexander.stein@systec-electronic.com>
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-09-21 17:25:18 -07:00
Guenter Roeck d91aae1e52 hwmon: (max16065) Add chip access warning to documentation
The chips supported by the max16065 driver should not be accessed using direct
i2ctools commands. Add warning to driver documentation to alert users.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-09-06 08:56:06 -07:00
Linus Torvalds 464c9098bb Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: (24 commits)
  hwmon: (lm90) Refactor reading of config2 register
  hwmon: (lm90) Make SA56004 detection more robust
  hwmon: (lm90) Simplify handling of extended local temp register
  hwmon: (pmbus) Add client driver for LM25066, LM5064, and LM5066
  hwmon: (max34440) Add support for peak attributes
  hwmon: (max8688) Add support for peak attributes
  hwmon: (max16064) Add support for peak attributes
  hwmon: (adm1275) Add support for peak attributes
  hwmon: (pmbus) Add support for peak attributes
  hwmon: Add new attributes to sysfs ABI
  hwmon: (pmbus) Strengthen check for status register existence
  hwmon: (pmbus) Add support for virtual pages
  hwmon: (pmbus) Support reading and writing of word registers in device specific code
  hwmon: (pmbus) Increase attribute name size
  hwmon: (pmbus) Add ADP4000, NCP4200 and NCP4208 to list of supported devices
  hwmon: (pmbus) Add support for VID output voltage mode
  hwmon: (pmbus) Move PMBus drivers to drivers/hwmon/pmbus
  hwmon: (coretemp) Add core/pkg threshold support to Coretemp
  hwmon: (lm95241) Add support for LM95231
  hwmon: LM95245 driver
  ...
2011-07-30 08:57:57 -10:00
Guenter Roeck 03e9bd8dbc hwmon: (pmbus) Add client driver for LM25066, LM5064, and LM5066
PMBus client driver supporting National Semiconductor LM25066, LM5064, and LM5066.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-07-28 20:16:17 -07:00
Guenter Roeck 98591dbe63 hwmon: (max34440) Add support for peak attributes
Add support for voltage, current, and temperature peak (historic maximum)
attributes.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-07-28 17:09:54 -07:00
Guenter Roeck 70e94b276c hwmon: (max8688) Add support for peak attributes
Add support for voltage, current, and temperature peak (historic maximum)
attributes.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-07-28 17:09:53 -07:00
Guenter Roeck 8ebed85450 hwmon: (max16064) Add support for peak attributes
Add support for voltage and temperature peak (historic maximum) attributes.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-07-28 17:09:53 -07:00
Guenter Roeck c576e30cd0 hwmon: (adm1275) Add support for peak attributes
Add support for voltage and current peak (historic maximum) attributes.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-07-28 17:09:52 -07:00
Guenter Roeck 0084e9faab hwmon: Add new attributes to sysfs ABI
Add the following attributes to the sysfs ABI.

in[0-*]_average
in[0-*]_lowest
in[0-*]_highest
in[0-*]_reset_history
in_reset_history

curr[1-*]_average
curr[1-*]_lowest
curr[1-*]_highest
curr[1-*]_reset_history
curr_reset_history

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-07-28 17:02:41 -07:00
Guenter Roeck e0455e380b hwmon: (pmbus) Add ADP4000, NCP4200 and NCP4208 to list of supported devices
Add ADP4000, NCP4200 and NCP4208 to the list of devices supported by the generic
PMBus driver, and add device IDs to enable explicit instantiation.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-07-28 15:31:18 -07:00
Durgadoss R c814a4c7c4 hwmon: (coretemp) Add core/pkg threshold support to Coretemp
This patch adds the core and pkg support to coretemp.
These thresholds can be configured via the sysfs interfaces tempX_max
and tempX_max_hyst. An interrupt is generated when CPU temperature reaches
or crosses above tempX_max OR drops below tempX_max_hyst.

This patch is based on the documentation in IA Manual vol 3A, that can be
downloaded from here:
http://download.intel.com/design/processor/manuals/253668.pdf

Signed-off-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-07-28 00:17:36 -07:00
Alexander Stein fffd80ccc1 hwmon: LM95245 driver
A hwmon driver for the National Semiconductor LM95245 dual temperature
sensors chip.

Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-07-28 00:17:35 -07:00
Stijn Devriendt 2ef017935d hwmon: (lm90) Add support for Philips SA56004
Add support for Philips SA56004, an LM86 compatible temperature sensor.

Signed-off-by: Stijn Devriendt <sdevrien@cisco.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-07-28 00:17:34 -07:00
Donggeun Kim f22aaaa70d hwmon: Driver for NTC Thermistors
Add support for NTC Thermistor series. In this release, the
following thermistors are supported: NCP15WB473, NCP18WB473, NCP03WB473,
and NCP15WL333. This driver is based on the datasheet of MURATA.

The driver in the patch does conversion from the raw ADC value
(either voltage or resistence) to temperature. In order to use
voltage values as input, the circuit schematics should be provided
with the platform data. A compensation table for each type of thermistor
is provided for the conversion.

Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: KyungMin Park <kyungmin.park@samsung.com>
Reviewed-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-07-28 00:17:33 -07:00