Ever since the eventfd type was introduced back in 2007 in commit
e1ad7468c7 ("signal/timer/event: eventfd core") the eventfd_signal()
function only ever passed 1 as a value for @n. There's no point in
keeping that additional argument.
Link: https://lore.kernel.org/r/20231122-vfs-eventfd-signal-v2-2-bd549b14ce0c@kernel.org
Acked-by: Xu Yilun <yilun.xu@intel.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com> # ocxl
Acked-by: Eric Farman <farman@linux.ibm.com> # s390
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
event_types_num received from the user can be 0. In that case, the
event_mask should be 0.
In addition, to create a correct mask we need to match the number
of event types to the bit location such that bit 0 represents a single
event type, bit 1 represents 2 types and so on.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Non-completed transactions from PCIe towards the device are handled by
the AXI drain mechanism. This handling is in the PCIe level, but the
transactions are still there in the device consuming some queues
entries, and therefore the device must be reset.
Modify to perform hard-reset upon PCIe AXI drain events.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The decoder interrupts are handled in the interrupt context
same as all user interrupts.
In such case, the wait list should be protected by
spin_lock_irqsave in order to avoid deadlock that might happen
with the user submission flow.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The function does not pin the pages so remove that from the inline doc.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Two function stubs were removed in an earlier commit but are now needed
again:
drivers/accel/habanalabs/common/device.c: In function 'hl_device_init':
drivers/accel/habanalabs/common/device.c:2231:14: error: implicit declaration of function 'hl_debugfs_device_init'; did you mean 'drm_debugfs_dev_init'? [-Werror=implicit-function-declaration]
2231 | rc = hl_debugfs_device_init(hdev);
drivers/accel/habanalabs/common/device.c:2367:9: error: implicit declaration of function 'hl_debugfs_device_fini'; did you mean 'hl_debugfs_remove_file'? [-Werror=implicit-function-declaration]
2367 | hl_debugfs_device_fini(hdev);
| ^~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This code was added as part of a bigger feature which was never
upstreamed, so remove this code.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Notifies the user which device was removed. It is important in
a server with multiple devices.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
flags in struct wait_interrupt_data is not used anywhere so remove it.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Traces the DMA [un]map_sgtable using the new traces we added.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
asic_dma_{un}map_single() asic-specific functions are no longer called
from the common code, so delete these functions.
In addition, delete the gaudi2 implementation as they are also not
called.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
There are cases such when FW runs MBIST, that preboot is expected to take
longer than the usual. In such cases the firmware reports status
SECURITY_READY/IN_PREBOOT and we extend the timeout waiting for it.
This is currently implemented for Gaudi2 only.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add debug prints to dump the content of the SG table which is prepared
when the dma-buf map op is called.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
On devices with virtual device memory (Gaudi2 onwards), user can provide
an offset within an allocated device memory from which he wants to
export a dma-buf object.
The offset value is verified by driver, but it is not taken into
consideration when the importer driver maps the dma-buf and the SG table
it prepared.
Add the missing offset handling.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The device_address member of 'struct hl_dmabuf_priv' is used only when
virtual device memory is not supported and dma-buf is exported from
address.
Set the value of this field only when it is relevant, and add "phys" to
its name so it would be clearer that it can't be a device virtual
address.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In some cases the calculated number of required entries for the dma-buf
SG table is wrong. For example, if the page size is larger than both the
dma max segment size of the importer device and from the exported side,
or if the exported size is part of a phys_pg_pack that is composed of
several pages.
In these cases, redundant entries will be added to the SG table.
Modify the method that the number of entries is calculated, and the way
they are prepared.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently driver maintain one list for both pending user interrupts
which seeks to wait till CQ reaches it's target value and also the ones
that seeks to get timestamp records when the CQ reaches it's target
value.
This causes delay in handling the waiters which gets higher priority
than the timestamp records.
In order to solve this, let's split the list into two,
one for each case and each one is protected by it's own spinlock.
Waiters will be handled within the interrupt context first,
then the timestamp records will be set.
Freeing the timestamp related memory will be handled in a workqueue.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently we use dynamic allocation inside the irq handler
in order to allocate free node to be used for the free jobs.
This operation is expensive, especially when we deal with large
burst of events records that get released at the same time.
The alternative is to have pre allocated pool of free nodes
and just fetch nodes from this pool at irq handling time instead
of allocating them.
In case the pool becomes full, then the driver will fallback to
dynamic allocations.
As part of the optimization also update the unregister flow
upon re-using a timestamp record, by making the operation much
simpler and quicker. We already have the record in the registration
flow and now we just seek to re-use with different interrupt.
Therefore, no need to look for buffer according to the user handle.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
There is a potential race between user thread seeking to re-use
a timestamp record with new interrupt id, while this record is still
in the middle of interrupt handling and it is about to be freed.
Imagine the driver set the record in_use to 0 and only then fill the
free_node information. This might lead to unpleasant scenario where
the new registration thread detects the record as free to use, and
change the cq buff address. That will cause the free_node to get
the wrong buffer address to put refcount to.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
alloc_sgt_from_device_pages() includes relatively many parameters, and
in a subsequent change another offset parameter is going to be added.
Using structure fields directly when calling this function, and in
hl_map_dmabuf() it is done twice, makes it a little bit difficult to
understand the meaning of the parameters.
To make it clearer, assign the required values into local variables with
explicit names, and use the variables when calling the function.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
It is currently allowed for a user to export dma-buf with size and
offset that are not multiples of PAGE_SIZE.
The exported memory is mapped for the importer device, and there it will
be rounded to PAGE_SIZE, leading to actually exporting more than the
user intended to.
To make the user be aware of it, accept only size and offset which are
multiple of PAGE_SIZE.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The 'exported_size' member in 'struct hl_vm_phys_pg_pack' is used to
keep the exported dma-buf size, to be later used when the buffer is
mapped.
However it is possible that the same phys_pg_pack will be exported more
than once, and independently of when the mapping takes place.
Remove this member from the phys_pg_pack structure, and simply use the
size in the dma-buf object as the exported size when mapping.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
For Gaudi1 the exported dma-buf is always composed of a single page, and
therefore the exported size is equal to this page's size.
When calling alloc_sgt_from_device_pages(), we pass 0 as the exported
size and internally calculate it as "number of pages * page size".
This makes alloc_sgt_from_device_pages() less clear, because the
exported size parameter is not understood as a restriction on the pages'
size.
Modify to always pass the exported size explicitly.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
After the heartbeat mechanism is now expanded to be used also
for EQ health check, we shouldn't send heartbeat messages
to FW before driver allow events to be received from FW.
Because if the driver will send two heartbeats before it enables
events to be received from FW, then the EQ health check
will fail and reset the device.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This is the second patch for applying the eq health check mechanism
which will add support for the interrupt flow for gaudi2 asic.
More info about the interrupt mechanism:
set a dedicated msix for the eq error interrupt, and add
interrupt handler for it.
when FW detects some issue with EQ like EQ_FULL, it'll
raise that interrupt and driver should reset the device.
Driver will inform the FW which msix index to use through
the already existing handshake mechanism which will
send msix info message to fw.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add mechanism for fw eq health check. this will be done using two flows:
using the heartbeat mechanism and raising a dedicated interrupt to
indicate an eq failure like EQ full.
This patch will add implementation for the eq heartbeat for gaudi2 asic.
More info about the heartbeat mechanism:
Expand the heartbeat mechanism to monitor a new event that
will be sent from FW upon receiving heartbeat message.
that way driver can know that the eq is working or not.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add tsc clock to clock sync info, to enable using this clock for
sampling and sync it with device time.
Signed-off-by: Hen Alon <halon@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Because it is not used and also, for graceful reset to work
those ioctls should run on the compute device.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The CPUCP interface is moved to a shared folder outside of accel as
a pre-requisite to upstream the NIC drivers that will also include
this file.
Signed-off-by: David Meriin <dmeriin@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
During ECC event handling, Memory wrapper id was mistakenly
printed as block id. Fix the print and in addition fetch the actual
block-id from firmware.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
coresight ETF blocks have different size. As a result, sync packets
need to be aligned based on fifo size.
Signed-off-by: Benjamin Dotan <bdotan@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
`strncpy` is deprecated for use on NUL-terminated destination strings [1].
A suitable replacement is `strscpy` [2] due to the fact that it
guarantees NUL-termination on its destination buffer argument which is
_not_ the case for `strncpy`!
There is likely no bug happening in this case since HL_STR_MAX is
strictly larger than all source strings. Nonetheless, prefer a safer and
more robust interface.
It should also be noted that `strscpy` will not pad like `strncpy`. If
this NUL-padding behavior is _required_ we should use `strscpy_pad`
instead of `strscpy`.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
snprintf() returns the "number of characters which *would* be generated for
the given input", not the size *really* generated.
In order to avoid too large values for 'str_size' (and potential negative
values for "PSOC_RAZWI_ENG_STR_SIZE - str_size") use scnprintf()
instead of snprintf().
Fixes: c0e6df9160 ("accel/habanalabs: fix address decode RAZWI handling")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
`strncpy` is deprecated for use on NUL-terminated destination strings [1].
We see that `prop->cpucp_info.card_name` is supposed to be
NUL-terminated based on its usage within `__hwmon_device_register()`
(wherein it's called "name"):
| if (name && (!strlen(name) || strpbrk(name, "-* \t\n")))
| dev_warn(dev,
| "hwmon: '%s' is not a valid name attribute, please fix\n",
| name);
A suitable replacement is `strscpy_pad` [2] due to the fact that it
guarantees both NUL-termination and NUL-padding on its destination
buffer.
NUL-padding on `prop->cpucp_info.card_name` is not strictly necessary as
`hdev->prop` is explicitly zero-initialized but should be used
regardless as it gets copied out to userspace directly -- as per Kees'
suggestion.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When config_etr or config_etf are called we need to validate the
parameters that are passed into them to make sure the requested
operation is valid.
Signed-off-by: Benjamin Dotan <bdotan@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Because firmware is blocking PSOC_ARC_DBG, we need to disable access
to this block.
Signed-off-by: Benjamin Dotan <bdotan@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The soft reset has transitioned to CPUCP packet instead of plain
register write and is about to be removed from the struct cpu_dyn_regs.
As a preparation for removing the cpu_rst_status field from
struct cpu_dyn_regs, switch to use the plain macro - this keeps the
backward compatibility.
Signed-off-by: Igor Grinberg <igrinberg@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
To use drm_ioctl(), move the ioctls to the device specific ioctls
range at [DRM_COMMAND_BASE, DRM_COMMAND_END).
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Register the compute device as an accel device, and remove the creation
of the habanalabs compute char device.
The IOCTLs in this patch are still handled by the current driver
handler. Moving to DRM IOCTL handling requires moving the IOCTLs
numbers to a specific range, so it will be handled in subsequent
patches.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
User gets notification for every engine error report, but he still
lacks the exact engine information. Hence, we allow user to query
for the exact engine reported an error.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
After being notified about certain errors, user is expected to finish
his post-errors actions and to release the device within some timeout,
after which is deice is being reset.
The default timeout value is 5 sec, which in some case is not enough for
a user application to collect debug data.
Increase the default value to 30 sec.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
It is possible for FW to request reserved space in dram.
If the device supports this option, it will retrieve the size from the
f/w and will reserve it.
Currently we add the common code infrastructure to support it.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
If we are initializing the kernel context when we have a Gaudi2 device,
we don't need to do any late initializing of that context with
specific Gaudi2 code.
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The soft reset has transitioned to CPUCP packet instead of plain
register write and is about to be removed from the struct cpu_dyn_regs.
As a preparation for removing the gic_host_soft_rst_irq field from
struct cpu_dyn_regs, switch to use the plain macro - this keeps the
backward compatibility.
Signed-off-by: Igor Grinberg <igrinberg@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
