Konrad Dybcio is promoted, from reviewer, to co-maintainer.
The mdt_loader gets a fix to the detection of split binaries, where the
previous logic sometimes concluded that the first segments was not
split, in a split image. The unconditional calling of
scm_pas_mem_setup() turns out to cause a regression and is reverted.
The altmode subfunction of pmic_glink is enabled for SM8450.
A new driver for exposing power statistics from the RPM, for debugging
purposes, is introduced.
OCMEM gets a debug prints of the hardware version, QMI helpers are
transitioned to alloc_ordered_workqueue() and an error message in
ramp_controller is improved.
An API is introduced to the SMEM driver to allow other drivers to query
the SoC id, rather than open-coding the parsing of the relevant SMEM
item. This is then used to clean up the Qualcomm NVMEM-based cpufreq
driver.
Socinfo is extended with knowledge about IPQ5018, IPQ5312 and IPQ5302.
-----BEGIN PGP SIGNATURE-----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=9Fv4
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=4/0b
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.5
Konrad Dybcio is promoted, from reviewer, to co-maintainer.
The mdt_loader gets a fix to the detection of split binaries, where the
previous logic sometimes concluded that the first segments was not
split, in a split image. The unconditional calling of
scm_pas_mem_setup() turns out to cause a regression and is reverted.
The altmode subfunction of pmic_glink is enabled for SM8450.
A new driver for exposing power statistics from the RPM, for debugging
purposes, is introduced.
OCMEM gets a debug prints of the hardware version, QMI helpers are
transitioned to alloc_ordered_workqueue() and an error message in
ramp_controller is improved.
An API is introduced to the SMEM driver to allow other drivers to query
the SoC id, rather than open-coding the parsing of the relevant SMEM
item. This is then used to clean up the Qualcomm NVMEM-based cpufreq
driver.
Socinfo is extended with knowledge about IPQ5018, IPQ5312 and IPQ5302.
* tag 'qcom-drivers-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (23 commits)
soc: qcom: ocmem: Add OCMEM hardware version print
cpufreq: qcom-nvmem: use helper to get SMEM SoC ID
cpufreq: qcom-nvmem: use SoC ID-s from bindings
soc: qcom: smem: introduce qcom_smem_get_soc_id()
soc: qcom: smem: Switch to EXPORT_SYMBOL_GPL()
soc: qcom: socinfo: move SMEM item struct and defines to a header
soc: qcom: mdt_loader: Fix unconditional call to scm_pas_mem_setup
MAINTAINERS: Add Konrad Dybcio as linux-arm-msm co-maintainer
dt-bindings: sram: qcom,imem: Document MSM8226
soc: qcom: socinfo: Add Soc ID for IPQ5312 and IPQ5302
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5312 and IPQ5302
soc: qcom: socinfo: Add IDs for IPQ5018 family
dt-bindings: arm: qcom,ids: Add IDs for IPQ5018 family
soc: qcom: Introduce RPM master stats driver
dt-bindings: soc: qcom: Add RPM Master stats
soc: qcom: qmi: Use alloc_ordered_workqueue() to create ordered workqueues
soc: qcom: ramp_controller: Improve error message for failure in .remove()
dt-bindings: soc: qcom: smd-rpm: allow MSM8226 over SMD
soc: qcom: rpmpd: use correct __le32 type
dt-bindings: soc: qcom: eud: Fix compatible string in the example
...
Link: https://lore.kernel.org/r/20230611010044.2481875-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
If the intel_pstate driver is set to passive mode, then writing the
same value to the energy_performance_preference sysfs twice will fail.
This is caused by the wrong return value used (index of the matched
energy_perf_string), instead of the length of the passed in parameter.
Fix by forcing the internal return value to zero when the same
preference is passed in by user. This same issue is not present when
active mode is used for the driver.
Fixes: f6ebbcf08f ("cpufreq: intel_pstate: Implement passive mode with HWP enabled")
Reported-by: Niklas Neronin <niklas.neronin@intel.com>
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Users are having more success with amd-pstate since the introduction
of EPP and Guided modes. To expose the driver to more users by default
introduce a kernel configuration option for setting the default mode.
Users can use an integer to map out which default mode they want to use
in lieu of a kernel command line option.
This will default to EPP, but only if:
1) The CPU supports an MSR.
2) The system profile is identified
3) The system profile is identified as a non-server by the FADT.
Link: https://gitlab.freedesktop.org/hadess/power-profiles-daemon/-/merge_requests/121
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Co-developed-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If a user's configuration doesn't explicitly specify the cpufreq
scaling governor then the code currently explicitly falls back to
'powersave'. This default is fine for notebooks and desktops, but
servers and undefined machines should default to 'performance'.
Look at the 'preferred_profile' field from the FADT to set this
policy accordingly.
Link: https://uefi.org/htmlspecs/ACPI_Spec_6_4_html/05_ACPI_Software_Programming_Model/ACPI_Software_Programming_Model.html#fixed-acpi-description-table-fadt
Acked-by: Huang Rui <ray.huang@amd.com>
Suggested-by: Wyes Karny <Wyes.Karny@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Kconfig currently defaults the governor to schedutil on x86_64
only when intel-pstate and SMP have been selected.
If the kernel is built only with amd-pstate, the default governor
should also be schedutil.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Tested-by: Perry Yuan <Perry.Yuan@amd.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The MT6380 regulator typically used together with MT7622 does not
support the current maximum processor and SRAM voltage in the cpufreq
driver (1360000uV).
For MT7622 limit processor and SRAM supply voltages to 1350000uV to
avoid having the tracking algorithm request unsupported voltages from
the regulator.
On MT7623 there is no separate SRAM supply and the maximum voltage used
is 1300000uV. Create dedicated platform data for MT7623 to cover that
case as well.
Fixes: 0883426fd0 ("cpufreq: mediatek: Raise proc and sram max voltage for MT7622/7623")
Suggested-by: Jia-wei Chang <Jia-wei.Chang@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add support for the Armada AP807 die to armada-8k. This uses a
different compatible for the CPU clock which needs to be added to
the cpufreq driver.
This commit takes a different approach to the WindRiver patch
"cpufreq: armada: enable ap807-cpu-clk" in that rather than calling
of_find_compatible_node() for each compatible, we use a table of
IDs instead.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
amd-pstate passive mode driver is hyphenated. So make amd-pstate active
mode driver consistent with that rename "amd_pstate_epp" to
"amd-pstate-epp".
Fixes: ffa5096a7c ("cpufreq: amd-pstate: implement Pstate EPP support for the AMD processors")
Cc: All applicable <stable@vger.kernel.org>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently amd_pstate sets CPPC enable bit in MSR_AMD_CPPC_ENABLE only
for the CPU where the module_init happened. But MSR_AMD_CPPC_ENABLE is
per-socket. This causes CPPC enable bit to set for only one socket for
servers with more than one physical packages. To fix this write
MSR_AMD_CPPC_ENABLE per-socket.
Also, handle duplicate calls for cppc_enable, because it's called from
per-policy/per-core callbacks and can result in duplicate MSR writes.
Before the fix:
amd@amd:~$ sudo rdmsr -a 0xc00102b1 | uniq --count
192 0
192 1
After the fix:
amd@amd:~$ sudo rdmsr -a 0xc00102b1 | uniq --count
384 1
Suggested-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If fast_switch_possible flag is set by the scaling driver, the governor
is free to select fast_switch function even if adjust_perf is set. Some
scaling drivers which use adjust_perf don't set fast_switch thinking
that the governor would never fall back to fast_switch. But the governor
can fall back to fast_switch even in runtime if frequency invariance is
disabled due to some reason. This could crash the kernel if the driver
didn't set the fast_switch function pointer.
Therefore, fail driver registration if it has adjust_perf without
fast_switch.
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make the cpufreq platdev driver as tristate so that it can be built
as loadable module.
Also add MODULE_LICENSE to support building as module.
Signed-off-by: Zhipeng Wang <zhipeng.wang_1@nxp.com>
[ Viresh: Merged two commits, included module.h ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add ti,am62a7 SoC to the blacklist as the ti-cpufreq driver will handle
creating the cpufreq-dt platform device after it completes so it is not
created twice.
Based on AM625 CPUFreq patch series by Dave Gerlach.
Signed-off-by: Vibhore Vardhan <vibhore@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add support for TI K3 AM62A7 SoC to read speed and revision values from
hardware and pass to OPP layer. AM62A7 has the same A53 and efuse
configuration as AM625. Thus, soc_data from AM625 is reused.
Based on AM625 CPUFreq patch series by Dave Gerlach.
Signed-off-by: Vibhore Vardhan <vibhore@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Now that SMEM exports a helper to get the SMEM SoC ID lets utilize it.
Currently qcom_cpufreq_get_msm_id() is encoding the returned SMEM SoC ID
into an enum, however there is no reason to do so and we can just match
directly on the SMEM SoC ID as returned by qcom_smem_get_soc_id().
Signed-off-by: Robert Marko <robimarko@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526204802.3081168-5-robimarko@gmail.com
SMEM SoC ID-s are now stored in DT bindings so lets use those instead of
defining them in the driver again.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526204802.3081168-4-robimarko@gmail.com
Driver should update policy->cur after updating the frequency.
Currently amd_pstate doesn't update policy->cur when `adjust_perf`
is used. Which causes /proc/cpuinfo to show wrong cpu frequency.
Fix this by updating policy->cur with correct frequency value in
adjust_perf function callback.
- Before the fix: (setting min freq to 1.5 MHz)
[root@amd]# cat /proc/cpuinfo | grep "cpu MHz" | sort | uniq --count
1 cpu MHz : 1777.016
1 cpu MHz : 1797.160
1 cpu MHz : 1797.270
189 cpu MHz : 400.000
- After the fix: (setting min freq to 1.5 MHz)
[root@amd]# cat /proc/cpuinfo | grep "cpu MHz" | sort | uniq --count
1 cpu MHz : 1753.353
1 cpu MHz : 1756.838
1 cpu MHz : 1776.466
1 cpu MHz : 1776.873
1 cpu MHz : 1777.308
1 cpu MHz : 1779.900
183 cpu MHz : 1805.231
1 cpu MHz : 1956.815
1 cpu MHz : 2246.203
1 cpu MHz : 2259.984
Fixes: 1d215f0319 ("cpufreq: amd-pstate: Add fast switch function for AMD P-State")
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
[ rjw: Subject edits ]
Cc: 5.17+ <stable@vger.kernel.org> # 5.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
amd_pstate active mode driver is only compatible with static governors.
Therefore it doesn't need fast_switch functionality. Remove
fast_switch_possible flag from amd_pstate active mode driver.
Fixes: ffa5096a7c ("cpufreq: amd-pstate: implement Pstate EPP support for the AMD processors")
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Schedutil normally calls the adjust_perf callback for drivers with
adjust_perf callback available and fast_switch_possible flag set.
However, when frequency invariance is disabled and schedutil tries to
invoke fast_switch. So, there is a chance of kernel crash if this
function pointer is not set. To protect against this scenario add
fast_switch callback to amd_pstate driver.
Fixes: 1d215f0319 ("cpufreq: amd-pstate: Add fast switch function for AMD P-State")
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The recent change to use platform devices to load ACPI PPC and PCC
drivers caused that a misleading warning is reported when a respective
module cannot be loaded because another CPU frequency driver is already
registered:
kernel: acpi-cpufreq: probe of acpi-cpufreq failed with error -17
Address it by changing the return code in acpi-cpufreq and pcc-cpufreq
for this case from -EEXIST to -ENODEV which silences the warning in
call_driver_probe().
The change has also a benefit for users of init_module() as this return
code is propagated out from the syscall. The previous -EEXIST code made
the callers, such as kmod, wrongly believe that the module was already
loaded instead of that it failed to load.
Fixes: 691a637123 ("ACPI: cpufreq: Use platform devices to load ACPI PPC and PCC drivers")
Reported-by: Kevin Locke <kevin@kevinlocke.name>
Link: https://lore.kernel.org/lkml/ZFreh8SDMX67EaB6@kevinlocke.name/
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Tested-by: Kevin Locke <kevin@kevinlocke.name>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is confusing if a warning is given for disabling a non-existent
frequency of the operating performance points (OPP). In this case
the function dev_pm_opp_disable() returns -ENODEV. Check the return
value and avoid the output of a warning in this case. Avoid code
duplication by using a separate function.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
[ Viresh : Updated commit subject ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
There is no point allocating the cpufreq driver dynamically and add so
much complexity in the driver.
Do what is done for other cpufreq drivers and statically allocate the
cpufreq driver.
Reported-by: Markus Elfring <Markus.Elfring@web.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
If the probe needs to be deferred, some resources still need to be
released. So branch to the error handling path instead of returning
directly.
Fixes: f41e1442ac ("cpufreq: tegra194: add OPP support and set bandwidth")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Sumit Gupta <sumitg@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add the compatible strings for supporting the generic
cpufreq driver on the StarFive JH7110 SoC.
Signed-off-by: Mason Huo <mason.huo@starfivetech.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening in
the driver core in the quest to be able to move "struct bus" and "struct
class" into read-only memory, a task now complete with these changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules for
all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most of
them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5
LEGadNS38k5fs+73UaxV
=7K4B
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
- First part of DT header detangling dropping cpu.h from of_device.h
and replacing some includes with forward declarations. A handful of
drivers needed some adjustment to their includes as a result.
- Refactor of_device.h to be used by bus drivers rather than various
device drivers. This moves non-bus related functions out of
of_device.h. The end goal is for of_platform.h and of_device.h to stop
including each other.
- Refactor open coded parsing of "ranges" in some bus drivers to use DT
address parsing functions
- Add some new address parsing functions of_property_read_reg(),
of_range_count(), and of_range_to_resource() in preparation to convert
more open coded parsing of DT addresses to use them.
- Treewide clean-ups to use of_property_read_bool() and
of_property_present() as appropriate. The ones here are the ones
that didn't get picked up elsewhere.
-----BEGIN PGP SIGNATURE-----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=89Zj
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
- First part of DT header detangling dropping cpu.h from of_device.h
and replacing some includes with forward declarations. A handful of
drivers needed some adjustment to their includes as a result.
- Refactor of_device.h to be used by bus drivers rather than various
device drivers. This moves non-bus related functions out of
of_device.h. The end goal is for of_platform.h and of_device.h to
stop including each other.
- Refactor open coded parsing of "ranges" in some bus drivers to use DT
address parsing functions
- Add some new address parsing functions of_property_read_reg(),
of_range_count(), and of_range_to_resource() in preparation to
convert more open coded parsing of DT addresses to use them.
- Treewide clean-ups to use of_property_read_bool() and
of_property_present() as appropriate. The ones here are the ones that
didn't get picked up elsewhere.
* tag 'devicetree-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (34 commits)
bus: tegra-gmi: Replace of_platform.h with explicit includes
hte: Use of_property_present() for testing DT property presence
w1: w1-gpio: Use of_property_read_bool() for boolean properties
virt: fsl: Use of_property_present() for testing DT property presence
soc: fsl: Use of_property_present() for testing DT property presence
sbus: display7seg: Use of_property_read_bool() for boolean properties
sparc: Use of_property_read_bool() for boolean properties
sparc: Use of_property_present() for testing DT property presence
bus: mvebu-mbus: Remove open coded "ranges" parsing
of/address: Add of_property_read_reg() helper
of/address: Add of_range_count() helper
of/address: Add support for 3 address cell bus
of/address: Add of_range_to_resource() helper
of: unittest: Add bus address range parsing tests
of: Drop cpu.h include from of_device.h
OPP: Adjust includes to remove of_device.h
irqchip: loongson-eiointc: Add explicit include for cpuhotplug.h
cpuidle: Adjust includes to remove of_device.h
cpufreq: sun50i: Add explicit include for cpu.h
cpufreq: Adjust includes to remove of_device.h
...
- Fix the frequency unit in cpufreq_verify_current_freq checks()
(Sanjay Chandrashekara).
- Make mode_state_machine in amd-pstate static (Tom Rix).
- Make the cpufreq core require drivers with target_index() to set
freq_table (Viresh Kumar).
- Fix typo in the ARM_BRCMSTB_AVS_CPUFREQ Kconfig entry (Jingyu Wang).
- Use of_property_read_bool() for boolean properties in the pmac32
cpufreq driver (Rob Herring).
- Make the cpufreq sysfs interface return proper error codes on
obviously invalid input (qinyu).
- Add guided autonomous mode support to the AMD P-state driver (Wyes
Karny).
- Make the Intel P-state driver enable HWP IO boost on all server
platforms (Srinivas Pandruvada).
- Add opp and bandwidth support to tegra194 cpufreq driver (Sumit
Gupta).
- Use of_property_present() for testing DT property presence (Rob
Herring).
- Remove MODULE_LICENSE in non-modules (Nick Alcock).
- Add SM7225 to cpufreq-dt-platdev blocklist (Luca Weiss).
- Optimizations and fixes for qcom-cpufreq-hw driver (Krzysztof
Kozlowski, Konrad Dybcio, and Bjorn Andersson).
- DT binding updates for qcom-cpufreq-hw driver (Konrad Dybcio and
Bartosz Golaszewski).
- Updates and fixes for mediatek driver (Jia-Wei Chang and
AngeloGioacchino Del Regno).
- Use of_property_present() for testing DT property presence in the
cpuidle code (Rob Herring).
- Drop unnecessary (void *) conversions from the PM core (Li zeming).
- Add sysfs files to represent time spent in a platform sleep state
during suspend-to-idle and make AMD and Intel PMC drivers use them
(Mario Limonciello).
- Use of_property_present() for testing DT property presence (Rob
Herring).
- Add set_required_opps() callback to the 'struct opp_table', to make
the code paths cleaner (Viresh Kumar).
- Update the pm-graph siute of utilities to v5.11 with the following
changes:
* New script which allows users to install the latest pm-graph
from the upstream github repo.
* Update all the dmesg suspend/resume PM print formats to be able to
process recent timelines using dmesg only.
* Add ethtool output to the log for the system's ethernet device if
ethtool exists.
* Make the tool more robustly handle events where mangled dmesg or
ftrace outputs do not include all the requisite data.
- Make the sleepgraph utility recognize "CPU killed" messages (Xueqin
Luo).
- Remove unneeded SRCU selection in Kconfig because it's always set
from devfreq core (Paul E. McKenney).
- Drop of_match_ptr() macro from exynos-bus.c because this driver is
always using the DT table for driver probe (Krzysztof Kozlowski).
- Use the preferred of_property_present() instead of the low-level
of_get_property() on exynos-bus.c (Rob Herring).
- Use devm_platform_get_and_ioream_resource() in exyno-ppmu.c (Yang Li).
-----BEGIN PGP SIGNATURE-----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=p/5G
-----END PGP SIGNATURE-----
Merge tag 'pm-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These update several cpufreq drivers and the cpufreq core, add sysfs
interface for exposing the time really spent in the platform low-power
state during suspend-to-idle, update devfreq (core and drivers) and
the pm-graph suite of tools and clean up code.
Specifics:
- Fix the frequency unit in cpufreq_verify_current_freq checks()
Sanjay Chandrashekara)
- Make mode_state_machine in amd-pstate static (Tom Rix)
- Make the cpufreq core require drivers with target_index() to set
freq_table (Viresh Kumar)
- Fix typo in the ARM_BRCMSTB_AVS_CPUFREQ Kconfig entry (Jingyu Wang)
- Use of_property_read_bool() for boolean properties in the pmac32
cpufreq driver (Rob Herring)
- Make the cpufreq sysfs interface return proper error codes on
obviously invalid input (qinyu)
- Add guided autonomous mode support to the AMD P-state driver (Wyes
Karny)
- Make the Intel P-state driver enable HWP IO boost on all server
platforms (Srinivas Pandruvada)
- Add opp and bandwidth support to tegra194 cpufreq driver (Sumit
Gupta)
- Use of_property_present() for testing DT property presence (Rob
Herring)
- Remove MODULE_LICENSE in non-modules (Nick Alcock)
- Add SM7225 to cpufreq-dt-platdev blocklist (Luca Weiss)
- Optimizations and fixes for qcom-cpufreq-hw driver (Krzysztof
Kozlowski, Konrad Dybcio, and Bjorn Andersson)
- DT binding updates for qcom-cpufreq-hw driver (Konrad Dybcio and
Bartosz Golaszewski)
- Updates and fixes for mediatek driver (Jia-Wei Chang and
AngeloGioacchino Del Regno)
- Use of_property_present() for testing DT property presence in the
cpuidle code (Rob Herring)
- Drop unnecessary (void *) conversions from the PM core (Li zeming)
- Add sysfs files to represent time spent in a platform sleep state
during suspend-to-idle and make AMD and Intel PMC drivers use them
Mario Limonciello)
- Use of_property_present() for testing DT property presence (Rob
Herring)
- Add set_required_opps() callback to the 'struct opp_table', to make
the code paths cleaner (Viresh Kumar)
- Update the pm-graph siute of utilities to v5.11 with the following
changes:
* New script which allows users to install the latest pm-graph
from the upstream github repo.
* Update all the dmesg suspend/resume PM print formats to be able
to process recent timelines using dmesg only.
* Add ethtool output to the log for the system's ethernet device
if ethtool exists.
* Make the tool more robustly handle events where mangled dmesg
or ftrace outputs do not include all the requisite data.
- Make the sleepgraph utility recognize "CPU killed" messages (Xueqin
Luo)
- Remove unneeded SRCU selection in Kconfig because it's always set
from devfreq core (Paul E. McKenney)
- Drop of_match_ptr() macro from exynos-bus.c because this driver is
always using the DT table for driver probe (Krzysztof Kozlowski)
- Use the preferred of_property_present() instead of the low-level
of_get_property() on exynos-bus.c (Rob Herring)
- Use devm_platform_get_and_ioream_resource() in exyno-ppmu.c (Yang
Li)"
* tag 'pm-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (44 commits)
platform/x86/intel/pmc: core: Report duration of time in HW sleep state
platform/x86/intel/pmc: core: Always capture counters on suspend
platform/x86/amd: pmc: Report duration of time in hw sleep state
PM: Add sysfs files to represent time spent in hardware sleep state
cpufreq: use correct unit when verify cur freq
cpufreq: tegra194: add OPP support and set bandwidth
cpufreq: amd-pstate: Make varaiable mode_state_machine static
PM: core: Remove unnecessary (void *) conversions
cpufreq: drivers with target_index() must set freq_table
PM / devfreq: exynos-ppmu: Use devm_platform_get_and_ioremap_resource()
OPP: Move required opps configuration to specialized callback
OPP: Handle all genpd cases together in _set_required_opps()
cpufreq: qcom-cpufreq-hw: Revert adding cpufreq qos
dt-bindings: cpufreq: cpufreq-qcom-hw: Add QCM2290
dt-bindings: cpufreq: cpufreq-qcom-hw: Sanitize data per compatible
dt-bindings: cpufreq: cpufreq-qcom-hw: Allow just 1 frequency domain
cpufreq: Add SM7225 to cpufreq-dt-platdev blocklist
cpufreq: qcom-cpufreq-hw: fix double IO unmap and resource release on exit
cpufreq: mediatek: Raise proc and sram max voltage for MT7622/7623
cpufreq: mediatek: raise proc/sram max voltage for MT8516
...
Merge ACPI processor driver changes, ACPI power management updates,
changes related to parsing ACPI tables and an ACPI sysfs interface
update for 6.4-rc1:
- Fix evaluating the _PDC ACPI control method when running as Xen
dom0 (Roger Pau Monne).
- Use platform devices to load ACPI PPC and PCC drivers (Petr Pavlu).
- Check for null return of devm_kzalloc() in fch_misc_setup() (Kang
Chen).
- Log a message if enable_irq_wake() fails for the ACPI SCI (Simon
Gaiser).
- Initialize the correct IOMMU fwspec while parsing ACPI VIOT
(Jean-Philippe Brucker).
- Amend indentation and prefix error messages with FW_BUG in the ACPI
SPCR parsing code (Andy Shevchenko).
- Enable ACPI sysfs support for CCEL records (Kuppuswamy
Sathyanarayanan).
* acpi-processor:
ACPI: processor: Fix evaluating _PDC method when running as Xen dom0
ACPI: cpufreq: Use platform devices to load ACPI PPC and PCC drivers
ACPI: processor: Check for null return of devm_kzalloc() in fch_misc_setup()
* acpi-pm:
ACPI: s2idle: Log when enabling wakeup IRQ fails
* acpi-tables:
ACPI: VIOT: Initialize the correct IOMMU fwspec
ACPI: SPCR: Amend indentation
ACPI: SPCR: Prefix error messages with FW_BUG
* acpi-sysfs:
ACPI: sysfs: Enable ACPI sysfs support for CCEL records
- Add opp and bandwidth support to tegra194 cpufreq driver (Sumit
Gupta).
- Use of_property_present() for testing DT property presence (Rob
Herring).
- Remove MODULE_LICENSE in non-modules (Nick Alcock).
- Add SM7225 to cpufreq-dt-platdev blocklist (Luca Weiss).
- Optimizations and fixes for qcom-cpufreq-hw driver (Krzysztof
Kozlowski, Konrad Dybcio, and Bjorn Andersson).
- DT binding updates for qcom-cpufreq-hw driver (Konrad Dybcio and
Bartosz Golaszewski).
- Updates and fixes for mediatek driver (Jia-Wei Chang and
AngeloGioacchino Del Regno).
-----BEGIN PGP SIGNATURE-----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=VJxz
-----END PGP SIGNATURE-----
Merge tag 'cpufreq-arm-updates-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull cpufreq/ARM updates for 6.4 from Viresh Kumar:
"- Add opp and bandwidth support to tegra194 cpufreq driver (Sumit
Gupta).
- Use of_property_present() for testing DT property presence (Rob
Herring).
- Remove MODULE_LICENSE in non-modules (Nick Alcock).
- Add SM7225 to cpufreq-dt-platdev blocklist (Luca Weiss).
- Optimizations and fixes for qcom-cpufreq-hw driver (Krzysztof
Kozlowski, Konrad Dybcio, and Bjorn Andersson).
- DT binding updates for qcom-cpufreq-hw driver (Konrad Dybcio and
Bartosz Golaszewski).
- Updates and fixes for mediatek driver (Jia-Wei Chang and
AngeloGioacchino Del Regno)."
cpufreq_verify_current_freq checks() if the frequency returned by
the hardware has a slight delta with the valid frequency value
last set and returns "policy->cur" if the delta is within "1 MHz".
In the comparison, "policy->cur" is in "kHz" but it's compared
against HZ_PER_MHZ. So, the comparison range becomes "1 GHz".
Fix this by comparing against KHZ_PER_MHZ instead of HZ_PER_MHZ.
Fixes: f55ae08c89 ("cpufreq: Avoid unnecessary frequency updates due to mismatch")
Signed-off-by: Sanjay Chandrashekara <sanjayc@nvidia.com>
[ sumit gupta: Commit message update ]
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add support to use OPP table from DT in Tegra194 cpufreq driver.
Tegra SoC's receive the frequency lookup table (LUT) from BPMP-FW.
Cross check the OPP's present in DT against the LUT from BPMP-FW
and enable only those DT OPP's which are present in LUT also.
The OPP table in DT has CPU Frequency to bandwidth mapping where
the bandwidth value is per MC channel. DRAM bandwidth depends on the
number of MC channels which can vary as per the boot configuration.
This per channel bandwidth from OPP table will be later converted by
MC driver to final bandwidth value by multiplying with number of
channels before sending the request to BPMP-FW.
If OPP table is not present in DT, then use the LUT from BPMP-FW
directy as the CPU frequency table and not do the DRAM frequency
scaling which is same as the current behavior.
Now, as the CPU Frequency table is being controlling through OPP
table in DT. Keeping fewer entries in the table will create less
frequency steps and can help to scale fast to high frequencies
when required.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Removing the include of cpu.h from of_device.h causes an error:
drivers/cpufreq/sun50i-cpufreq-nvmem.c:42:19: error: implicit declaration of function ‘get_cpu_device’; did you mean ‘get_device’? [-Werror=implicit-function-declaration]
As of_device.h is not otherwise needed, it can be replaced with of.h
(also implicitly included).
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20230329-dt-cpu-header-cleanups-v1-15-581e2605fe47@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Now that of_cpu_device_node_get() is defined in of.h, of_device.h is just
implicitly including other includes, and is no longer needed. Adjust the
include files with what was implicitly included by of_device.h (cpu.h and
of.h) and drop including of_device.h.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230329-dt-cpu-header-cleanups-v1-14-581e2605fe47@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
smatch reports
drivers/cpufreq/amd-pstate.c:907:25: warning: symbol
'mode_state_machine' was not declared. Should it be static?
This variable is only used in one file so it should be static.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Wyes Karny <wyes.karny@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
amd_pstate mode can be changed by writing the mode name to the `status`
sysfs. But some combinations are not working. Fix this issue by taking
care of the edge cases.
Before the fix the mode change combination test fails:
#./pst_test.sh
Test passed: from: disable, to
Test passed: from: disable, to disable
Test failed: 1, From mode: disable, to mode: passive
Test failed: 1, From mode: disable, to mode: active
Test failed: 1, From mode: passive, to mode: active
Test passed: from: passive, to disable
Test failed: 1, From mode: passive, to mode: passive
Test failed: 1, From mode: passive, to mode: active
Test failed: 1, From mode: active, to mode: active
Test passed: from: active, to disable
Test failed: 1, From mode: active, to mode: passive
Test failed: 1, From mode: active, to mode: active
After the fix test passes:
#./pst_test.sh
Test passed: from: disable, to
Test passed: from: disable, to disable
Test passed: from: disable, to passive
Test passed: from: disable, to active
Test passed: from: passive, to active
Test passed: from: passive, to disable
Test passed: from: passive, to passive
Test passed: from: passive, to active
Test passed: from: active, to active
Test passed: from: active, to disable
Test passed: from: active, to passive
Test passed: from: active, to active
Fixes: abd61c08ef ("cpufreq: amd-pstate: add driver working mode switch support")
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since the cpufreq core directly uses freq_table, for cpufreq drivers
that set their target_index() callback, make it mandatory for them to
set the same.
Since this is set per policy and normally from policy->init(), do this
from cpufreq_table_validate_and_sort() which gets called right after
->init().
Reported-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The OSM/EPSS hardware controls the frequency of each CPU cluster based
on requests from the OS and various throttling events in the system.
While throttling is in effect the related dcvs interrupt will be kept
high. The purpose of the code handling this interrupt is to
continuously report the thermal pressure based on the throttled
frequency.
The reasoning for adding QoS control to this mechanism is not entirely
clear, but the introduction of commit 'c4c0efb06f17 ("cpufreq:
qcom-cpufreq-hw: Add cpufreq qos for LMh")' causes the
scaling_max_frequncy to be set to the throttled frequency. On the next
iteration of polling, the throttled frequency is above or equal to the
newly requested frequency, so the polling is stopped.
With cpufreq limiting the max frequency, the hardware no longer report a
throttling state and no further updates to thermal pressure or qos
state are made.
The result of this is that scaling_max_frequency can only go down, and
the system becomes slower and slower every time a thermal throttling
event is reported by the hardware.
Even if the logic could be improved, there is no reason for software to
limit the max freqency in response to the hardware limiting the max
frequency. At best software will follow the reported hardware state, but
typically it will cause slower backoff of the throttling.
This reverts commit c4c0efb06f.
Fixes: c4c0efb06f ("cpufreq: qcom-cpufreq-hw: Add cpufreq qos for LMh")
Reported-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The Qualcomm SM7225 platform uses the qcom-cpufreq-hw driver, so add
it to the cpufreq-dt-platdev driver's blocklist.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
During the addition of SRAM voltage tracking for CCI scaling, this
driver got some voltage limits set for the vtrack algorithm: these
were moved to platform data first, then enforced in a later commit
6a17b3876b ("cpufreq: mediatek: Refine mtk_cpufreq_voltage_tracking()")
using these as max values for the regulator_set_voltage() calls.
In this case, the vsram/vproc constraints for MT7622 and MT7623
were supposed to be the same as MT2701 (and a number of other SoCs),
but that turned out to be a mistake because the aforementioned two
SoCs' maximum voltage for both VPROC and VPROC_SRAM is 1.36V.
Fix that by adding new platform data for MT7622/7623 declaring the
right {proc,sram}_max_volt parameter.
Fixes: ead858bd12 ("cpufreq: mediatek: Move voltage limits to platform data")
Fixes: 6a17b3876b ("cpufreq: mediatek: Refine mtk_cpufreq_voltage_tracking()")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Since the upper boundary of proc/sram voltage of MT8516 is 1300 mV,
which is greater than the value of MT2701 1150 mV, we fix it by adding
the corresponding platform data and specify proc/sram_max_volt to
support MT8516.
Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com>
Fixes: ead858bd12 ("cpufreq: mediatek: Move voltage limits to platform data")
Fixes: 6a17b3876b ("cpufreq: mediatek: Refine mtk_cpufreq_voltage_tracking()")
Reported-by: Nick Hainke <vincent@systemli.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Any kind of failure in mtk_cpu_dvfs_info_init() will lead to calling
regulator_put() or clk_put() and the KP will occur since the regulator/clk
handlers are used after released in mtk_cpu_dvfs_info_release().
To prevent the usage after regulator_put()/clk_put(), the regulator/clk
handlers are addressed in a way of "Free the Last Thing Style".
Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com>
Fixes: 4b9ceb757b ("cpufreq: mediatek: Enable clocks and regulators")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Suggested-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
In order to prevent passing zero to 'PTR_ERR' in
mtk_cpu_dvfs_info_init(), we fix the return value of of_get_cci() using
error pointer by explicitly casting error number.
Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com>
Fixes: 0daa47325b ("cpufreq: mediatek: Link CCI device to CPU")
Reported-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to to of_property_read_bool().
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Delete the redundant word 'to' from the help text in the
ARM_BRCMSTB_AVS_CPUFREQ Kconfig entry.
Signed-off-by: Jingyu Wang <jingyuwang_vip@163.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When echo an invalid val to scaling_min_freq:
> echo 123abc123 > scaling_min_freq
It looks weird to have a return val of 0:
> echo $?
> 0
Sane people won't echo strings like that into these interfaces but fuzz
tests may do. Also, maybe it's better to inform people if input is
invalid.
After this:
> echo 123abc123 > scaling_min_freq
> -bash: echo: write error: Invalid argument
Signed-off-by: qinyu <qinyu32@huawei.com>
Tested-by: zhangxiaofeng <zhangxiaofeng46@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The acpi-cpufreq and pcc-cpufreq drivers are loaded through per-CPU
module aliases. This can result in many unnecessary load requests during
boot if another frequency module, such as intel_pstate, is already
active. For instance, on a typical Intel system, one can observe that
udev makes 2x#CPUs attempts to insert acpi_cpufreq and 1x#CPUs attempts
for pcc_cpufreq. All these tries then fail if another frequency module
is already registered.
In the worst case, without the recent fix in commit 0254127ab9
("module: Don't wait for GOING modules"), these module loads occupied
all udev workers and had their initialization attempts ran sequentially.
Resolving all these loads then on some larger machines took too long,
prevented other hardware from getting its drivers initialized and
resulted in a failed boot. Discussion over these duplicate module
requests ended up with a conclusion that only one load attempt should be
ideally made.
Both acpi-cpufreq and pcc-cpufreq drivers use platform firmware controls
which are defined by ACPI. It is possible to treat these interfaces as
platform devices.
The patch extends the ACPI parsing logic to check the ACPI namespace if
the PPC or PCC interface is present and creates a virtual platform
device for each if it is available. The acpi-cpufreq and pcc-cpufreq
drivers are then updated to map to these devices.
This allows to try loading acpi-cpufreq and pcc-cpufreq only once during
boot and only if a given interface is available in the firmware.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
[ rjw: whitespace and error message log level adjustments, subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
amd_pstate driver's `status` sysfs entry helps to control the driver's
mode dynamically by user. After the addition of guided mode the
combinations of mode transitions have been increased (16 combinations).
Therefore optimise the amd_pstate_update_status function by implementing
a state transition table.
There are 4 states amd_pstate supports, namely: 'disable', 'passive',
'active', and 'guided'. The transition from any state to any other
state is possible after this change.
Sysfs interface:
To disable amd_pstate driver:
# echo disable > /sys/devices/system/cpu/amd_pstate/status
To enable passive mode:
# echo passive > /sys/devices/system/cpu/amd_pstate/status
To change mode to active:
# echo active > /sys/devices/system/cpu/amd_pstate/status
To change mode to guided:
# echo guided > /sys/devices/system/cpu/amd_pstate/status
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
From ACPI spec below 3 modes for CPPC can be defined:
1. Non autonomous: OS scaling governor specifies operating frequency/
performance level through `Desired Performance` register and platform
follows that.
2. Guided autonomous: OS scaling governor specifies min and max
frequencies/ performance levels through `Minimum Performance` and
`Maximum Performance` register, and platform can autonomously select an
operating frequency in this range.
3. Fully autonomous: OS only hints (via EPP) to platform for the required
energy performance preference for the workload and platform autonomously
scales the frequency.
Currently (1) is supported by amd_pstate as passive mode, and (3) is
implemented by EPP support. This change is to support (2).
In guided autonomous mode the min_perf is based on the input from the
scaling governor. For example, in case of schedutil this value depends
on the current utilization. And max_perf is set to max capacity.
To activate guided auto mode ``amd_pstate=guided`` command line
parameter has to be passed in the kernel.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The HWP IO boost results in slight improvements for IO performance on
both Ice Lake and Sapphire Rapid servers.
Currently there is a CPU model check for Skylake desktop and server along
with the ACPI PM profile for performance and enterprise servers to enable
IO boost.
Remove the CPU model check, so that all current server models enable HWP
IO boost by default.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Direct access to the struct bus_type dev_root pointer is going away soon
so replace that with a call to bus_get_dev_root() instead, which is what
it is there for.
In doing so, remove the unneded kobject structure that was only being
created to cause a subdirectory for the attributes. The name of the
attribute group is the correct way to do this, saving code and
complexity as well as allowing the attributes to properly show up to
userspace tools (the raw kobject would not allow that.)
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linux-pm@vger.kernel.org
Acked-by: Huang Rui <ray.huang@.amd.com>
Link: https://lore.kernel.org/r/20230313182918.1312597-20-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Direct access to the struct bus_type dev_root pointer is going away soon
so replace that with a call to bus_get_dev_root() instead, which is what
it is there for.
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-pm@vger.kernel.org
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230313182918.1312597-3-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
For quite some time, this driver has been performing some quite
low-level DT operations. Simplify that using platform_get_resource.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
- Fix error handling in the apple-soc cpufreq driver (Dan Carpenter).
- Change the log level of a message in the amd-pstate cpufreq driver
so it is more visible to users (Kai-Heng Feng).
- Adjust the balance_performance EPP value for Sapphire Rapids in the
intel_pstate cpufreq driver (Srinivas Pandruvada).
- Remove MODULE_LICENSE from 3 pieces of non-modular code (Nick Alcock).
- Make a read-only kobj_type structure in the schedutil cpufreq governor
constant (Thomas Weißschuh).
- Add Add Power Limit4 support for Meteor Lake SoC to the Intel RAPL
power capping driver (Sumeet Pawnikar).
-----BEGIN PGP SIGNATURE-----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=lRKS
-----END PGP SIGNATURE-----
Merge tag 'pm-6.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These update power capping (new hardware support and cleanup) and
cpufreq (bug fixes, cleanups and intel_pstate adjustment for a new
platform).
Specifics:
- Fix error handling in the apple-soc cpufreq driver (Dan Carpenter)
- Change the log level of a message in the amd-pstate cpufreq driver
so it is more visible to users (Kai-Heng Feng)
- Adjust the balance_performance EPP value for Sapphire Rapids in the
intel_pstate cpufreq driver (Srinivas Pandruvada)
- Remove MODULE_LICENSE from 3 pieces of non-modular code (Nick
Alcock)
- Make a read-only kobj_type structure in the schedutil cpufreq
governor constant (Thomas Weißschuh)
- Add Add Power Limit4 support for Meteor Lake SoC to the Intel RAPL
power capping driver (Sumeet Pawnikar)"
* tag 'pm-6.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: apple-soc: Fix an IS_ERR() vs NULL check
powercap: remove MODULE_LICENSE in non-modules
cpufreq: intel_pstate: remove MODULE_LICENSE in non-modules
powercap: RAPL: Add Power Limit4 support for Meteor Lake SoC
cpufreq: amd-pstate: remove MODULE_LICENSE in non-modules
cpufreq: schedutil: make kobj_type structure constant
cpufreq: amd-pstate: Let user know amd-pstate is disabled
cpufreq: intel_pstate: Adjust balance_performance EPP for Sapphire Rapids
The of_iomap() function returns NULL if it fails. It never returns
error pointers. Fix the check accordingly.
Fixes: 6286bbb405 ("cpufreq: apple-soc: Add new driver to control Apple SoC CPU P-states")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in amd-pstate.c which cannot be built as a module.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
[ rjw: Subject and changelog adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 202e683df3 ("cpufreq: amd-pstate: add amd-pstate driver
parameter for mode selection") changed the driver to be disabled by
default, and this can surprise users.
Let users know what happened so they can decide what to do next.
Link: https://bugs.launchpad.net/bugs/2006942
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Yuan Perry <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
While the majority of server OS distributions are deployed with the
"performance" governor as the default, some distributions like Ubuntu use
the "powersave" governor by default.
While using the "powersave" governor in its default configuration on
Sapphire Rapids systems leads to much lower power, the performance is
lower by more than 25% for several workloads relative to the
"performance" governor.
A 37% difference has been reported by www.Phoronix.com [1].
This is a consequence of using a relatively high EPP value in the
default configuration of the "powersave" governor and the performance
can be made much closer to the "performance" governor's level by
adjusting the default EPP value. Based on experiments, with EPP of 0x00,
0x10, 0x20, the performance delta between the "powersave" governor and
the "performance" one is around 12%. However, the EPP of 0x20 reduces
average power by 18% with respect to the lower EPP values.
[Note that raising min_perf_pct in sysfs as high as 50% in addition to
adjusting EPP does not improve the performance any further.]
For this reason, change the EPP value corresponding to the the default
balance_performance setting for Sapphire Rapids to 0x20, which is
straightforward, because analogous default EPP adjustment has been
applied to Alder Lake and there is a way to set the balance_performance
EPP value in intel_pstate based on the processor model already.
The goal here is to limit the mean performance delta between the
"powersave" governor in the default configuration and the "performance"
governor for a wide variety of server workloadsto to around 10-12%. For
some bursty workloads, this delta can be still large, as the frequency
ramp-up will still lag when the "powersave" governor is in use
irrespective of the EPP setting, because the performance governor always
requests the maximum possible frequency.
Link: https://www.phoronix.com/review/centos-clear-spr/6 # [1]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Drop port I/O validation for some regions to avoid AML failures due
to rejections of legitimate port I/O writes (Mario Limonciello).
- Constify acpi_get_handle() pathname argument to allow its callers to
pass const pathnames to it (Sakari Ailus).
- Prevent acpi_ns_simple_repair() from crashing in some cases when
AE_AML_NO_RETURN_VALUE should be returned (Daniil Tatianin).
- Fix typo in CDAT DSMAS struct definition (Lukas Wunner).
- Drop an unnecessary (void *) conversion from the ACPI processor
driver (Zhou jie).
- Modify the ACPI processor performance library code to use the "no
limit" frequency QoS as appropriate and adjust the intel_pstate
driver accordingly (Rafael Wysocki).
- Add support for NBFT to the ACPI table parser (Stuart Hayes).
- Introduce list of known non-PNP devices to avoid enumerating some of
them as PNP devices (Rafael Wysocki).
- Add x86 ACPI paths to the ACPI entry in MAINTAINERS to allow scripts
to report the actual maintainers information (Rafael Wysocki).
- Add two more entries to the ACPI IRQ override quirk list (Adam
Niederer, Werner Sembach).
- Add a pmic_i2c_address entry for Intel Bay Trail Crystal Cove to
allow intel_soc_pmic_exec_mipi_pmic_seq_element() to be used with
the Bay Trail Crystal Cove PMIC OpRegion driver (Hans de Goede).
- Add comments with DSDT power OpRegion field names to the ACPI PMIC
driver (Hans de Goede).
- Fix string termination handling in the ACPI battery driver (Armin
Wolf).
- Limit error type to 32-bit width in the ACPI APEI error injection
code (Shuai Xue).
- Fix Lenovo Ideapad Z570 DMI match in the ACPI backlight driver (Hans
de Goede).
- Silence missing prototype warnings in some places in the ACPI-related
code (Ammar Faizi).
- Make kobj_type structures used in the ACPI code constant (Thomas
Weißschuh).
- Correct spelling in firmware-guide/ACPI (Randy Dunlap).
- Clarify the meaning of Explicit and Implicit in the _DSD GPIO
properties documentation (Andy Shevchenko).
- Fix some kernel-doc comments in the ACPI CPPC library code (Yang Li).
-----BEGIN PGP SIGNATURE-----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=BoTs
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These fix a frequency limit issue in the ACPI processor performance
library code, fix a few issues in the ACPICA code, improve Crystal
Cove support in the ACPI PMIC driver, fix string handling in the ACPI
battery driver, add IRQ override quirks for a few machines more, fix
other assorted problems and clean up code and documentation.
Specifics:
- Drop port I/O validation for some regions to avoid AML failures due
to rejections of legitimate port I/O writes (Mario Limonciello)
- Constify acpi_get_handle() pathname argument to allow its callers
to pass const pathnames to it (Sakari Ailus)
- Prevent acpi_ns_simple_repair() from crashing in some cases when
AE_AML_NO_RETURN_VALUE should be returned (Daniil Tatianin)
- Fix typo in CDAT DSMAS struct definition (Lukas Wunner)
- Drop an unnecessary (void *) conversion from the ACPI processor
driver (Zhou jie)
- Modify the ACPI processor performance library code to use the "no
limit" frequency QoS as appropriate and adjust the intel_pstate
driver accordingly (Rafael Wysocki)
- Add support for NBFT to the ACPI table parser (Stuart Hayes)
- Introduce list of known non-PNP devices to avoid enumerating some
of them as PNP devices (Rafael Wysocki)
- Add x86 ACPI paths to the ACPI entry in MAINTAINERS to allow
scripts to report the actual maintainers information (Rafael
Wysocki)
- Add two more entries to the ACPI IRQ override quirk list (Adam
Niederer, Werner Sembach)
- Add a pmic_i2c_address entry for Intel Bay Trail Crystal Cove to
allow intel_soc_pmic_exec_mipi_pmic_seq_element() to be used with
the Bay Trail Crystal Cove PMIC OpRegion driver (Hans de Goede)
- Add comments with DSDT power OpRegion field names to the ACPI PMIC
driver (Hans de Goede)
- Fix string termination handling in the ACPI battery driver (Armin
Wolf)
- Limit error type to 32-bit width in the ACPI APEI error injection
code (Shuai Xue)
- Fix Lenovo Ideapad Z570 DMI match in the ACPI backlight driver
(Hans de Goede)
- Silence missing prototype warnings in some places in the
ACPI-related code (Ammar Faizi)
- Make kobj_type structures used in the ACPI code constant (Thomas
Weißschuh)
- Correct spelling in firmware-guide/ACPI (Randy Dunlap)
- Clarify the meaning of Explicit and Implicit in the _DSD GPIO
properties documentation (Andy Shevchenko)
- Fix some kernel-doc comments in the ACPI CPPC library code (Yang
Li)"
* tag 'acpi-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (25 commits)
ACPI: make kobj_type structures constant
Documentation: firmware-guide: gpio-properties: Clarify Explicit and Implicit
ACPICA: Fix typo in CDAT DSMAS struct definition
ACPI: resource: Do IRQ override on all TongFang GMxRGxx
ACPI: resource: Add IRQ overrides for MAINGEAR Vector Pro 2 models
ACPI: CPPC: Fix some kernel-doc comments
ACPI: video: Fix Lenovo Ideapad Z570 DMI match
Documentation: firmware-guide/ACPI: correct spelling
ACPI: PMIC: Add comments with DSDT power opregion field names
ACPI: battery: Increase maximum string length
ACPI: battery: Fix buffer overread if not NUL-terminated
ACPI: APEI: EINJ: Limit error type to 32-bit width
MAINTAINERS: Add x86 ACPI paths to the ACPI entry
ACPI: battery: Fix missing NUL-termination with large strings
ACPI: PNP: Introduce list of known non-PNP devices
ACPICA: nsrepair: handle cases without a return value correctly
ACPI: Silence missing prototype warnings
cpufreq: intel_pstate: Drop ACPI _PSS states table patching
ACPI: processor: perflib: Avoid updating frequency QoS unnecessarily
ACPI: processor: perflib: Use the "no limit" frequency QoS
...
- Add EPP support to the AMD P-state cpufreq driver (Perry Yuan, Wyes
Karny, Arnd Bergmann, Bagas Sanjaya).
- Drop the custom cpufreq driver for loongson1 that is not necessary
any more and the corresponding cpufreq platform device (Keguang
Zhang).
- Remove "select SRCU" from system sleep, cpufreq and OPP Kconfig
entries (Paul E. McKenney).
- Enable thermal cooling for Tegra194 (Yi-Wei Wang).
- Register module device table and add missing compatibles for
cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss).
- Various dt binding updates for qcom-cpufreq-nvmem and opp-v2-kryo-cpu
(Christian Marangi).
- Make kobj_type structure in the cpufreq core constant (Thomas
Weißschuh).
- Make cpufreq_unregister_driver() return void (Uwe Kleine-König).
- Make the TEO cpuidle governor check CPU utilization in order to refine
idle state selection (Kajetan Puchalski).
- Make Kconfig select the haltpoll cpuidle governor when the haltpoll
cpuidle driver is selected and replace a default_idle() call in that
driver with arch_cpu_idle() to allow MWAIT to be used (Li RongQing).
- Add Emerald Rapids Xeon support to the intel_idle driver (Artem
Bityutskiy).
- Add ARCH_SUSPEND_POSSIBLE dependencies for ARMv4 cpuidle drivers to
avoid randconfig build failures (Arnd Bergmann).
- Make kobj_type structures used in the cpuidle sysfs interface
constant (Thomas Weißschuh).
- Make the cpuidle driver registration code update microsecond values
of idle state parameters in accordance with their nanosecond values
if they are provided (Rafael Wysocki).
- Make the PSCI cpuidle driver prevent topology CPUs from being
suspended on PREEMPT_RT (Krzysztof Kozlowski).
- Document that pm_runtime_force_suspend() cannot be used with
DPM_FLAG_SMART_SUSPEND (Richard Fitzgerald).
- Add EXPORT macros for exporting PM functions from drivers (Richard
Fitzgerald).
- Remove /** from non-kernel-doc comments in hibernation code (Randy
Dunlap).
- Fix possible name leak in powercap_register_zone() (Yang Yingliang).
- Add Meteor Lake and Emerald Rapids support to the intel_rapl power
capping driver (Zhang Rui).
- Modify the idle_inject power capping facility to support 100% idle
injection (Srinivas Pandruvada).
- Fix large time windows handling in the intel_rapl power capping
driver (Zhang Rui).
- Fix memory leaks with using debugfs_lookup() in the generic PM
domains and Energy Model code (Greg Kroah-Hartman).
- Add missing 'cache-unified' property in the example for kryo OPP
bindings (Rob Herring).
- Fix error checking in opp_migrate_dentry() (Qi Zheng).
- Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad
Dybcio).
- Modify some power management utilities to use the canonical ftrace
path (Ross Zwisler).
- Correct spelling problems for Documentation/power/ as reported by
codespell (Randy Dunlap).
-----BEGIN PGP SIGNATURE-----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=lZLx
-----END PGP SIGNATURE-----
Merge tag 'pm-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add EPP support to the AMD P-state cpufreq driver, add support
for new platforms to the Intel RAPL power capping driver, intel_idle
and the Qualcomm cpufreq driver, enable thermal cooling for Tegra194,
drop the custom cpufreq driver for loongson1 that is not necessary any
more (and the corresponding cpufreq platform device), fix assorted
issues and clean up code.
Specifics:
- Add EPP support to the AMD P-state cpufreq driver (Perry Yuan, Wyes
Karny, Arnd Bergmann, Bagas Sanjaya)
- Drop the custom cpufreq driver for loongson1 that is not necessary
any more and the corresponding cpufreq platform device (Keguang
Zhang)
- Remove "select SRCU" from system sleep, cpufreq and OPP Kconfig
entries (Paul E. McKenney)
- Enable thermal cooling for Tegra194 (Yi-Wei Wang)
- Register module device table and add missing compatibles for
cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss)
- Various dt binding updates for qcom-cpufreq-nvmem and
opp-v2-kryo-cpu (Christian Marangi)
- Make kobj_type structure in the cpufreq core constant (Thomas
Weißschuh)
- Make cpufreq_unregister_driver() return void (Uwe Kleine-König)
- Make the TEO cpuidle governor check CPU utilization in order to
refine idle state selection (Kajetan Puchalski)
- Make Kconfig select the haltpoll cpuidle governor when the haltpoll
cpuidle driver is selected and replace a default_idle() call in
that driver with arch_cpu_idle() to allow MWAIT to be used (Li
RongQing)
- Add Emerald Rapids Xeon support to the intel_idle driver (Artem
Bityutskiy)
- Add ARCH_SUSPEND_POSSIBLE dependencies for ARMv4 cpuidle drivers to
avoid randconfig build failures (Arnd Bergmann)
- Make kobj_type structures used in the cpuidle sysfs interface
constant (Thomas Weißschuh)
- Make the cpuidle driver registration code update microsecond values
of idle state parameters in accordance with their nanosecond values
if they are provided (Rafael Wysocki)
- Make the PSCI cpuidle driver prevent topology CPUs from being
suspended on PREEMPT_RT (Krzysztof Kozlowski)
- Document that pm_runtime_force_suspend() cannot be used with
DPM_FLAG_SMART_SUSPEND (Richard Fitzgerald)
- Add EXPORT macros for exporting PM functions from drivers (Richard
Fitzgerald)
- Remove /** from non-kernel-doc comments in hibernation code (Randy
Dunlap)
- Fix possible name leak in powercap_register_zone() (Yang Yingliang)
- Add Meteor Lake and Emerald Rapids support to the intel_rapl power
capping driver (Zhang Rui)
- Modify the idle_inject power capping facility to support 100% idle
injection (Srinivas Pandruvada)
- Fix large time windows handling in the intel_rapl power capping
driver (Zhang Rui)
- Fix memory leaks with using debugfs_lookup() in the generic PM
domains and Energy Model code (Greg Kroah-Hartman)
- Add missing 'cache-unified' property in the example for kryo OPP
bindings (Rob Herring)
- Fix error checking in opp_migrate_dentry() (Qi Zheng)
- Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad
Dybcio)
- Modify some power management utilities to use the canonical ftrace
path (Ross Zwisler)
- Correct spelling problems for Documentation/power/ as reported by
codespell (Randy Dunlap)"
* tag 'pm-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits)
Documentation: amd-pstate: disambiguate user space sections
cpufreq: amd-pstate: Fix invalid write to MSR_AMD_CPPC_REQ
dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum
dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional
dt-bindings: cpufreq: qcom-cpufreq-nvmem: specify supported opp tables
PM: Add EXPORT macros for exporting PM functions
cpuidle: psci: Do not suspend topology CPUs on PREEMPT_RT
MIPS: loongson32: Drop obsolete cpufreq platform device
powercap: intel_rapl: Fix handling for large time window
cpuidle: driver: Update microsecond values of state parameters as needed
cpuidle: sysfs: make kobj_type structures constant
cpuidle: add ARCH_SUSPEND_POSSIBLE dependencies
PM: EM: fix memory leak with using debugfs_lookup()
PM: domains: fix memory leak with using debugfs_lookup()
cpufreq: Make kobj_type structure constant
cpufreq: davinci: Fix clk use after free
cpufreq: amd-pstate: avoid uninitialized variable use
cpufreq: Make cpufreq_unregister_driver() return void
OPP: fix error checking in opp_migrate_dentry()
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM8550 compatible
...
This is a follow-up to the deprecation of most of the old-style board
files that was merged in linux-6.0, removing them for good.
This branch is almost exclusively dead code removal based on those
annotations. Some device driver removals went through separate subsystem
trees, but the majority is in the same branch, in order to better handle
dependencies between the patches and avoid breaking bisection.
Unfortunately that leads to merge conflicts against other changes in the
subsystem trees, but they should all be trivial to resolve by removing
the files.
See commit 7d0d3fa733 ("Merge tag 'arm-boardfiles-6.0' of
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
description of which machines were marked unused and are now removed. The
only removals that got postponed are Terastation WXL (mv78xx0) and
Jornada720 (StrongARM1100), which turned out to still have potential
users.
-----BEGIN PGP SIGNATURE-----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=WejQ
-----END PGP SIGNATURE-----
Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC boardfile updates from Arnd Bergmann
"Unused boardfile removal for 6.3
This is a follow-up to the deprecation of most of the old-style board
files that was merged in linux-6.0, removing them for good.
This branch is almost exclusively dead code removal based on those
annotations. Some device driver removals went through separate
subsystem trees, but the majority is in the same branch, in order to
better handle dependencies between the patches and avoid breaking
bisection.
Unfortunately that leads to merge conflicts against other changes in
the subsystem trees, but they should all be trivial to resolve by
removing the files.
See commit 7d0d3fa733 ("Merge tag 'arm-boardfiles-6.0' of
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
description of which machines were marked unused and are now removed.
The only removals that got postponed are Terastation WXL (mv78xx0) and
Jornada720 (StrongARM1100), which turned out to still have potential
users"
* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
mmc: omap: drop TPS65010 dependency
ARM: pxa: restore mfp-pxa320.h
usb: ohci-omap: avoid unused-variable warning
ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
ARM: s3c: remove obsolete s3c-cpu-freq header
MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
ARM: remove CONFIG_UNUSED_BOARD_FILES
mfd: remove htc-pasic3 driver
w1: remove ds1wm driver
usb: remove ohci-tmio driver
fbdev: remove w100fb driver
fbdev: remove tmiofb driver
mmc: remove tmio_mmc driver
mfd: remove ucb1400 support
mfd: remove toshiba tmio drivers
rtc: remove v3020 driver
power: remove pda_power supply driver
ASoC: pxa: remove unused board support
pcmcia: remove unused pxa/sa1100 drivers
...
Merge ACPI processor driver changes, ACPI table parser changes, ACPI
device enumeration changes related to PNP and a MAINTAINERS update
related to ACPI for 6.3-rc1:
- Drop an unnecessary (void *) conversion from the ACPI processor
driver (Zhou jie).
- Modify the ACPI processor performance library code to use the "no
limit" frequency QoS as appropriate and adjust the intel_pstate
driver accordingly (Rafael Wysocki).
- Add support for NBFT to the ACPI table parser (Stuart Hayes).
- Introduce list of known non-PNP devices to avoid enumerating some of
them as PNP devices (Rafael Wysocki).
- Add x86 ACPI paths to the ACPI entry in MAINTAINERS to allow scripts
to report the actual maintainers information (Rafael Wysocki).
* acpi-processor:
cpufreq: intel_pstate: Drop ACPI _PSS states table patching
ACPI: processor: perflib: Avoid updating frequency QoS unnecessarily
ACPI: processor: perflib: Use the "no limit" frequency QoS
ACPI: processor: idle: Drop unnecessary (void *) conversion
* acpi-tables:
ACPI: tables: Add support for NBFT
* acpi-pnp:
ACPI: PNP: Introduce list of known non-PNP devices
* acpi-maintainers:
MAINTAINERS: Add x86 ACPI paths to the ACPI entry
- Enable thermal cooling for Tegra194 (Yi-Wei Wang).
- Register module device table and add missing compatibles for
cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss).
- Various dt binding updates for qcom-cpufreq-nvmem and opp-v2-kryo-cpu
(Christian Marangi).
-----BEGIN PGP SIGNATURE-----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=dCgg
-----END PGP SIGNATURE-----
Merge tag 'cpufreq-arm-updates-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull cpufreq ARM updates for 6.3 from Viresh Kumar:
"- Enable thermal cooling for Tegra194 (Yi-Wei Wang).
- Register module device table and add missing compatibles for
cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss).
- Various dt binding updates for qcom-cpufreq-nvmem and opp-v2-kryo-cpu
(Christian Marangi)."
* tag 'cpufreq-arm-updates-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum
dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional
dt-bindings: cpufreq: qcom-cpufreq-nvmem: specify supported opp tables
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM8550 compatible
dt-bindings: cpufreq: cpufreq-qcom-hw: Add missing compatibles
cpufreq: mediatek-hw: Register to module device table
cpufreq: tegra194: Enable CPUFREQ thermal cooling
Since commit ee6d3dd4ed ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definition to prevent
modification at runtime.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The remove function first frees the clks and only then calls
cpufreq_unregister_driver(). If one of the cpufreq callbacks is called
just before cpufreq_unregister_driver() is run, the freed clks might be
used.
Fixes: 6601b8030d ("davinci: add generic CPUFreq driver for DaVinci")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The new epp support causes warnings about three separate
but related bugs:
1) failing before allocation should just return an error:
drivers/cpufreq/amd-pstate.c:951:6: error: variable 'ret' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (!dev)
^~~~
drivers/cpufreq/amd-pstate.c:1018:9: note: uninitialized use occurs here
return ret;
^~~
2) wrong variable to store return code:
drivers/cpufreq/amd-pstate.c:963:6: error: variable 'ret' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (rc)
^~
drivers/cpufreq/amd-pstate.c:1019:9: note: uninitialized use occurs here
return ret;
^~~
drivers/cpufreq/amd-pstate.c:963:2: note: remove the 'if' if its condition is always false
if (rc)
^~~~~~~
3) calling amd_pstate_set_epp() in cleanup path after determining
that it should not be called:
drivers/cpufreq/amd-pstate.c:1055:6: error: variable 'epp' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (cpudata->epp_policy == cpudata->policy)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/cpufreq/amd-pstate.c:1080:30: note: uninitialized use occurs here
amd_pstate_set_epp(cpudata, epp);
^~~
All three are trivial to fix, but most likely there are additional bugs
in this function when the error handling was not really tested.
Fixes: ffa5096a7c ("cpufreq: amd-pstate: implement Pstate EPP support for the AMD processors")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Reviewed-by: Yuan Perry <Perry.Yuan@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
All but a few drivers ignore the return value of
cpufreq_unregister_driver(). Those few that don't only call it after
cpufreq_register_driver() succeeded, in which case the call doesn't
fail.
Make the function return no value and add a WARN_ON for the case that
the function is called in an invalid situation (i.e. without a previous
successful call to cpufreq_register_driver()).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> # brcmstb-avs-cpufreq.c
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- the incorrect value returned by cpufreq driver's ->get() callback for
Qualcomm platforms (Douglas Anderson).
-----BEGIN PGP SIGNATURE-----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=Wvnb
-----END PGP SIGNATURE-----
Merge tag 'cpufreq-arm-fixes-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull an ARM cpufreq fix for 6.2-rc8 from Viresh Kumar:
- Fix the incorrect value returned by cpufreq driver's ->get() callback for
Qualcomm platforms (Douglas Anderson).
* tag 'cpufreq-arm-fixes-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: qcom-hw: Fix cpufreq_driver->get() for non-LMH systems
On a sc7180-based Chromebook, when I go to
/sys/devices/system/cpu/cpu0/cpufreq I can see:
cpuinfo_cur_freq:2995200
cpuinfo_max_freq:1804800
scaling_available_frequencies:300000 576000 ... 1708800 1804800
scaling_cur_freq:1804800
scaling_max_freq:1804800
As you can see the `cpuinfo_cur_freq` is bogus. It turns out that this
bogus info started showing up as of commit c72cf0cb1d ("cpufreq:
qcom-hw: Fix the frequency returned by cpufreq_driver->get()"). That
commit seems to assume that everyone is on the LMH bandwagon, but
sc7180 isn't.
Let's go back to the old code in the case where LMH isn't used.
Fixes: c72cf0cb1d ("cpufreq: qcom-hw: Fix the frequency returned by cpufreq_driver->get()")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
[ Viresh: Fixed the 'fixes' tag ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Register the compatibles for this module on the module device table so
it can be automatically loaded when a matching device is found on the
system.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Populate the flag CPUFREQ_IS_COOLING_DEV for the Tegra194 CPUFREQ driver
to register it as a cooling device. This enables CPU frequency
throttling for CPUs when the passive trip points are crossed.
Signed-off-by: Yi-Wei Wang <yiweiw@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
replace the sprintf with a more generic sysfs_emit function
No intended potential function impact
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Wyes Karny <wyes.karny@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
While amd-pstate driver was loaded with specific driver mode, it will
need to check which mode is enabled for the pstate driver,add this sysfs
entry to show the current status
$ cat /sys/devices/system/cpu/amd-pstate/status
active
Meanwhile, user can switch the pstate driver mode with writing mode
string to sysfs entry as below.
Enable passive mode:
$ sudo bash -c "echo passive > /sys/devices/system/cpu/amd-pstate/status"
Enable active mode (EPP driver mode):
$ sudo bash -c "echo active > /sys/devices/system/cpu/amd-pstate/status"
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Wyes Karny <wyes.karny@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
add suspend and resume support for the AMD processors by amd_pstate_epp
driver instance.
When the CPPC is suspended, EPP driver will set EPP profile to 'power'
profile and set max/min perf to lowest perf value.
When resume happens, it will restore the MSR registers with
previous cached value.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mario Limonciello <Mario.Limonciello@amd.com>
Reviewed-by: Wyes Karny <wyes.karny@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Adds online and offline driver callback support to allow cpu cores go
offline and help to restore the previous working states when core goes
back online later for EPP driver mode.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mario Limonciello <Mario.Limonciello@amd.com>
Reviewed-by: Wyes Karny <wyes.karny@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add EPP driver support for AMD SoCs which support a dedicated MSR for
CPPC. EPP is used by the DPM controller to configure the frequency that
a core operates at during short periods of activity.
The SoC EPP targets are configured on a scale from 0 to 255 where 0
represents maximum performance and 255 represents maximum efficiency.
The amd-pstate driver exports profile string names to userspace that are
tied to specific EPP values.
The balance_performance string (0x80) provides the best balance for
efficiency versus power on most systems, but users can choose other
strings to meet their needs as well.
$ cat /sys/devices/system/cpu/cpufreq/policy0/energy_performance_available_preferences
default performance balance_performance balance_power power
$ cat /sys/devices/system/cpu/cpufreq/policy0/energy_performance_preference
balance_performance
To enable the driver,it needs to add `amd_pstate=active` to kernel
command line and kernel will load the active mode epp driver
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mario Limonciello <Mario.Limonciello@amd.com>
Reviewed-by: Wyes Karny <wyes.karny@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The amd-pstate driver may support multiple working modes.
Introduce a variable to keep track of which mode is currently enabled.
Here we use cppc_state var to indicate which mode is enabled.
This change will help to simplify the the amd_pstate_param() to choose
which mode used for the following driver registration.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Now that the SRCU Kconfig option is unconditionally selected, there is
no longer any point in selecting it. Therefore, remove the "select SRCU"
Kconfig statements.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The generic DT based cpufreq driver works for Loongson-1,
so delete the old custom driver.
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
All s3c24xx platforms were removed, so these five drivers are all
obsolete now.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The sa11xx platform has two cpufreq drivers, one for the older
StrongARM1100 SoC, and a second one for StrongARM1110. After
the removal of most SA1100 based machines, this driver is unused,
and only the sa1110-cpufreq driver remains.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Cerf, H3100, Badge4, Hackkit, LART, NanoEngine, PLEB, Shannon and
Simpad machines were all marked as unused as there are no known users
left. Remove all of these, along with references to them in defconfig
files and drivers.
Four machines remain now: Assabet, Collie (Zaurus SL5500), iPAQ H3600
and Jornada 720, each of which had one person still using them, with
Collie also being supported in Qemu.
Cc: Peter Chubb <peter.chubb@unsw.edu.au>
Cc: Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In the amd_pstate_adjust_perf(), there is one cpufreq_cpu_get() call to
increase increments the kobject reference count of policy and make it as
busy. Therefore, a corresponding call to cpufreq_cpu_put() is needed to
decrement the kobject reference count back, it will resolve the kernel
hang issue when unregistering the amd-pstate driver and register the
`amd_pstate_epp` driver instance.
Fixes: 1d215f0319 ("cpufreq: amd-pstate: Add fast switch function for AMD P-State")
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Cc: 5.17+ <stable@vger.kernel.org> # 5.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use NULL for NULL pointer to fix the following sparse warning:
drivers/cpufreq/armada-37xx-cpufreq.c:448:32: sparse: warning: Using plain integer as NULL pointer
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Without this, the CPUs are left in a random pstate. Since we don't
support deep idle yet (which powers down the CPUs), this results in
significantly increased idle power consumption in suspend.
Fixes: 6286bbb405 ("cpufreq: apple-soc: Add new driver to control Apple SoC CPU P-states")
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The Qualcomm SM6375 platform uses the qcom-cpufreq-hw driver, so add
it to the cpufreq-dt-platdev driver's blocklist.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
After making acpi_processor_get_platform_limit() use the "no limit"
value for its frequency QoS request when _PPC returns 0, it is not
necessary to replace the frequency corresponding to the first _PSS
return package entry with the maximum turbo frequency of the given
CPU in intel_pstate_init_acpi_perf_limits() any more, so drop the
code doing that along with the comment explaining it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tegra234 platform uses the tegra194-cpufreq driver, so add it
to the blocklist in cpufreq-dt-platdev driver to avoid the cpufreq
driver registration from there.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Commit 054a3ef683 ("cpufreq: qcom-hw: Allocate qcom_cpufreq_data during
probe") assumed that every reg variable is 4*u32 wide (as most new qcom
SoCs set #address- and #size-cells to <2>. That is not the case for all of
them though. Check the cells values dynamically to ensure the proper
region of the DTB is being read.
Fixes: 054a3ef683 ("cpufreq: qcom-hw: Allocate qcom_cpufreq_data during probe")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The fields of the _CPC object are unsigned 32-bits values.
To avoid overflows while using _CPC's values, add 'u64' casts.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
When -Woverride-init is enabled, gcc notices that the .attr
field is initialized twice:
drivers/cpufreq/apple-soc-cpufreq.c:331:27: error: initialized field overwritten [-Werror=override-init]
331 | .attr = apple_soc_cpufreq_hw_attr,
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Remove the first one, since this is not actually used.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This Kselftest update for Linux 6.2-rc1 consists of several fixes
and enhancements to existing tests and a few new tests:
- adds new amd-pstate and fixes and enhances existing ones
- adds new watchdog tests and enhances existing ones to improve coverage
- fixes to ftrace, splice_read, rtc, and efivars tests
- fixes to handle egrep obsolescence in the latest grep release
- miscellaneous spelling and SPDX fixes
-----BEGIN PGP SIGNATURE-----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=4cDX
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-next-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
"Several fixes and enhancements to existing tests and a few new tests:
- add new amd-pstate tests and fix and enhance existing ones
- add new watchdog tests and enhance existing ones to improve
coverage
- fixes to ftrace, splice_read, rtc, and efivars tests
- fixes to handle egrep obsolescence in the latest grep release
- miscellaneous spelling and SPDX fixes"
* tag 'linux-kselftest-next-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (24 commits)
selftests/ftrace: Use long for synthetic event probe test
selftests/tpm2: Split async tests call to separate shell script runner
selftests: splice_read: Fix sysfs read cases
selftests: ftrace: Use "grep -E" instead of "egrep"
selftests: gpio: Use "grep -E" instead of "egrep"
selftests: kselftest_deps: Use "grep -E" instead of "egrep"
selftests/efivarfs: Add checking of the test return value
cpufreq: amd-pstate: fix spdxcheck warnings for amd-pstate-ut.c
selftests: rtc: skip when RTC is not present
selftests/ftrace: event_triggers: wait longer for test_event_enable
selftests/vDSO: Add riscv getcpu & gettimeofday test
Documentation: amd-pstate: Add tbench and gitsource test introduction
selftests: amd-pstate: Trigger gitsource benchmark and test cpus
selftests: amd-pstate: Trigger tbench benchmark and test cpus
selftests: amd-pstate: Split basic.sh into run.sh and basic.sh.
selftests: amd-pstate: Rename amd-pstate-ut.sh to basic.sh.
selftests/ftrace: Convert tracer tests to use 'requires' to specify program dependency
selftests/ftrace: Add check for ping command for trigger tests
selftests/watchdog: Fix spelling mistake "Temeprature" -> "Temperature"
selftests/watchdog: add test for WDIOC_GETTEMP
...
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
