mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-28 13:22:57 +00:00
1215395 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Palmer Dabbelt
|
77eea559ba
|
Merge patch series "bpf, riscv: use BPF prog pack allocator in BPF JIT"
Puranjay Mohan <puranjay12@gmail.com> says:
Here is some data to prove the V2 fixes the problem:
Without this series:
root@rv-selftester:~/src/kselftest/bpf# time ./test_tag
test_tag: OK (40945 tests)
real 7m47.562s
user 0m24.145s
sys 6m37.064s
With this series applied:
root@rv-selftester:~/src/selftest/bpf# time ./test_tag
test_tag: OK (40945 tests)
real 7m29.472s
user 0m25.865s
sys 6m18.401s
BPF programs currently consume a page each on RISCV. For systems with many BPF
programs, this adds significant pressure to instruction TLB. High iTLB pressure
usually causes slow down for the whole system.
Song Liu introduced the BPF prog pack allocator[1] to mitigate the above issue.
It packs multiple BPF programs into a single huge page. It is currently only
enabled for the x86_64 BPF JIT.
I enabled this allocator on the ARM64 BPF JIT[2]. It is being reviewed now.
This patch series enables the BPF prog pack allocator for the RISCV BPF JIT.
======================================================
Performance Analysis of prog pack allocator on RISCV64
======================================================
Test setup:
===========
Host machine: Debian GNU/Linux 11 (bullseye)
Qemu Version: QEMU emulator version 8.0.3 (Debian 1:8.0.3+dfsg-1)
u-boot-qemu Version: 2023.07+dfsg-1
opensbi Version: 1.3-1
To test the performance of the BPF prog pack allocator on RV, a stresser
tool[4] linked below was built. This tool loads 8 BPF programs on the system and
triggers 5 of them in an infinite loop by doing system calls.
The runner script starts 20 instances of the above which loads 8*20=160 BPF
programs on the system, 5*20=100 of which are being constantly triggered.
The script is passed a command which would be run in the above environment.
The script was run with following perf command:
./run.sh "perf stat -a \
-e iTLB-load-misses \
-e dTLB-load-misses \
-e dTLB-store-misses \
-e instructions \
--timeout 60000"
The output of the above command is discussed below before and after enabling the
BPF prog pack allocator.
The tests were run on qemu-system-riscv64 with 8 cpus, 16G memory. The rootfs
was created using Bjorn's riscv-cross-builder[5] docker container linked below.
Results
=======
Before enabling prog pack allocator:
------------------------------------
Performance counter stats for 'system wide':
4939048 iTLB-load-misses
5468689 dTLB-load-misses
465234 dTLB-store-misses
1441082097998 instructions
60.045791200 seconds time elapsed
After enabling prog pack allocator:
-----------------------------------
Performance counter stats for 'system wide':
3430035 iTLB-load-misses
5008745 dTLB-load-misses
409944 dTLB-store-misses
1441535637988 instructions
60.046296600 seconds time elapsed
Improvements in metrics
=======================
It was expected that the iTLB-load-misses would decrease as now a single huge
page is used to keep all the BPF programs compared to a single page for each
program earlier.
--------------------------------------------
The improvement in iTLB-load-misses: -30.5 %
--------------------------------------------
I repeated this expriment more than 100 times in different setups and the
improvement was always greater than 30%.
This patch series is boot tested on the Starfive VisionFive 2 board[6].
The performance analysis was not done on the board because it doesn't
expose iTLB-load-misses, etc. The stresser program was run on the board to test
the loading and unloading of BPF programs
[1] https://lore.kernel.org/bpf/20220204185742.271030-1-song@kernel.org/
[2] https://lore.kernel.org/all/20230626085811.3192402-1-puranjay12@gmail.com/
[3] https://lore.kernel.org/all/20230626085811.3192402-2-puranjay12@gmail.com/
[4] https://github.com/puranjaymohan/BPF-Allocator-Bench
[5] https://github.com/bjoto/riscv-cross-builder
[6] https://www.starfivetech.com/en/site/boards
* b4-shazam-merge:
bpf, riscv: use prog pack allocator in the BPF JIT
riscv: implement a memset like function for text
riscv: extend patch_text_nosync() for multiple pages
bpf: make bpf_prog_pack allocator portable
Link: https://lore.kernel.org/r/20230831131229.497941-1-puranjay12@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
||
|
Palmer Dabbelt
|
f578055558
|
Merge patch series "riscv: Introduce KASLR"
Alexandre Ghiti <alexghiti@rivosinc.com> says: The following KASLR implementation allows to randomize the kernel mapping: - virtually: we expect the bootloader to provide a seed in the device-tree - physically: only implemented in the EFI stub, it relies on the firmware to provide a seed using EFI_RNG_PROTOCOL. arm64 has a similar implementation hence the patch 3 factorizes KASLR related functions for riscv to take advantage. The new virtual kernel location is limited by the early page table that only has one PUD and with the PMD alignment constraint, the kernel can only take < 512 positions. * b4-shazam-merge: riscv: libstub: Implement KASLR by using generic functions libstub: Fix compilation warning for rv32 arm64: libstub: Move KASLR handling functions to kaslr.c riscv: Dump out kernel offset information on panic riscv: Introduce virtual kernel mapping KASLR Link: https://lore.kernel.org/r/20230722123850.634544-1-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Palmer Dabbelt
|
f093636354
|
Merge patch "RISC-V: Add ptrace support for vectors"
This resurrects the vector ptrace() support that was removed for 6.5 due to some bugs cropping up as part of the GDB review process. * b4-shazam-merge: RISC-V: Add ptrace support for vectors Link: https://lore.kernel.org/r/20230825050248.32681-1-andy.chiu@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Palmer Dabbelt
|
c23be918c5
|
Merge patch series "Add non-coherent DMA support for AX45MP"
Prabhakar <prabhakar.csengg@gmail.com> says:
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
non-coherent DMA support for AX45MP
====================================
On the Andes AX45MP core, cache coherency is a specification option so it
may not be supported. In this case DMA will fail. To get around with this
issue this patch series does the below:
1] Andes alternative ports is implemented as errata which checks if the
IOCP is missing and only then applies to CMO errata. One vendor specific
SBI EXT (ANDES_SBI_EXT_IOCP_SW_WORKAROUND) is implemented as part of
errata.
Below are the configs which Andes port provides (and are selected by
RZ/Five):
- ERRATA_ANDES
- ERRATA_ANDES_CMO
OpenSBI patch supporting ANDES_SBI_EXT_IOCP_SW_WORKAROUND SBI is now
part v1.3 release.
2] Andes AX45MP core has a Programmable Physical Memory Attributes (PMA)
block that allows dynamic adjustment of memory attributes in the runtime.
It contains a configurable amount of PMA entries implemented as CSR
registers to control the attributes of memory locations in interest.
OpenSBI configures the PMA regions as required and creates a reserve memory
node and propagates it to the higher boot stack.
Currently OpenSBI (upstream) configures the required PMA region and passes
this a shared DMA pool to Linux.
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
pma_resv0@58000000 {
compatible = "shared-dma-pool";
reg = <0x0 0x58000000 0x0 0x08000000>;
no-map;
linux,dma-default;
};
};
The above shared DMA pool gets appended to Linux DTB so the DMA memory
requests go through this region.
3] We provide callbacks to synchronize specific content between memory and
cache.
4] RZ/Five SoC selects the below configs
- AX45MP_L2_CACHE
- DMA_GLOBAL_POOL
- ERRATA_ANDES
- ERRATA_ANDES_CMO
----------x---------------------x--------------------x---------------x----
* b4-shazam-merge:
soc: renesas: Kconfig: Select the required configs for RZ/Five SoC
cache: Add L2 cache management for Andes AX45MP RISC-V core
dt-bindings: cache: andestech,ax45mp-cache: Add DT binding documentation for L2 cache controller
riscv: mm: dma-noncoherent: nonstandard cache operations support
riscv: errata: Add Andes alternative ports
riscv: asm: vendorid_list: Add Andes Technology to the vendors list
Link: https://lore.kernel.org/r/20230818135723.80612-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
||
|
Palmer Dabbelt
|
7f215d003f
|
Merge patch series "riscv: dma-mapping: unify support for cache flushes"
Prabhakar <prabhakar.csengg@gmail.com> says: From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> This patch series is a subset from Arnd's original series [0]. Ive just picked up the bits required for RISC-V unification of cache flushing. Remaining patches from the series [0] will be taken care by Arnd soon. * b4-shazam-merge: riscv: dma-mapping: switch over to generic implementation riscv: dma-mapping: skip invalidation before bidirectional DMA riscv: dma-mapping: only invalidate after DMA, not flush Link: https://lore.kernel.org/r/20230816232336.164413-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Palmer Dabbelt
|
580253b518
|
Merge patch series "RISC-V: Probe for misaligned access speed"
Evan Green <evan@rivosinc.com> says: The current setting for the hwprobe bit indicating misaligned access speed is controlled by a vendor-specific feature probe function. This is essentially a per-SoC table we have to maintain on behalf of each vendor going forward. Let's convert that instead to something we detect at runtime. We have two assembly routines at the heart of our probe: one that does a bunch of word-sized accesses (without aligning its input buffer), and the other that does byte accesses. If we can move a larger number of bytes using misaligned word accesses than we can with the same amount of time doing byte accesses, then we can declare misaligned accesses as "fast". The tradeoff of reducing this maintenance burden is boot time. We spend 4-6 jiffies per core doing this measurement (0-2 on jiffie edge alignment, and 4 on measurement). The timing loop was based on raid6_choose_gen(), which uses (16+1)*N jiffies (where N is the number of algorithms). By taking only the fastest iteration out of all attempts for use in the comparison, variance between runs is very low. On my THead C906, it looks like this: [ 0.047563] cpu0: Ratio of byte access time to unaligned word access is 4.34, unaligned accesses are fast Several others have chimed in with results on slow machines with the older algorithm, which took all runs into account, including noise like interrupts. Even with this variation, results indicate that in all cases (fast, slow, and emulated) the measured numbers are nowhere near each other (always multiple factors away). * b4-shazam-merge: RISC-V: alternative: Remove feature_probe_func RISC-V: Probe for unaligned access speed Link: https://lore.kernel.org/r/20230818194136.4084400-1-evan@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Björn Töpel
|
3f3f384139 |
selftests: Keep symlinks, when possible
When kselftest is built/installed with the 'gen_tar' target, rsync is used for the installation step to copy files. Extra care is needed for tests that have symlinks. Commit |
||
|
Ricardo B. Marliere
|
5f9dd2e896 |
selftests: fix dependency checker script
This patch fixes inconsistencies in the parsing rules of the levels 1 and 2 of the kselftest_deps.sh. It was added the levels 4 and 5 to account for a few edge cases that are present in some tests, also some minor identation styling have been fixed (s/ /\t/g). Signed-off-by: Ricardo B. Marliere <rbmarliere@gmail.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Björn Töpel
|
9616cb34b0 |
kselftest/runner.sh: Propagate SIGTERM to runner child
Timeouts in kselftest are done using the "timeout" command with the
"--foreground" option. Without the "foreground" option, it is not
possible for a user to cancel the runner using SIGINT, because the
signal is not propagated to timeout which is running in a different
process group. The "forground" options places the timeout in the same
process group as its parent, but only sends the SIGTERM (on timeout)
signal to the forked process. Unfortunately, this does not play nice
with all kselftests, e.g. "net:fcnal-test.sh", where the child
processes will linger because timeout does not send SIGTERM to the
group.
Some users have noted these hangs [1].
Fix this by nesting the timeout with an additional timeout without the
foreground option.
Link: https://lore.kernel.org/all/7650b2eb-0aee-a2b0-2e64-c9bc63210f67@alu.unizg.hr/ # [1]
Fixes:
|
||
|
Bhaskar Chowdhury
|
5facccc940 |
MAINTAINERS: remove links to obsolete btrfs.wiki.kernel.org
The wiki has been archived and is not updated anymore. Remove or replace the links in files that contain it (MAINTAINERS, Kconfig, docs). Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
a57c2d4e46 |
btrfs: assert delayed node locked when removing delayed item
When removing a delayed item, or releasing which will remove it as well, we will modify one of the delayed node's rbtrees and item counter if the delayed item is in one of the rbtrees. This require having the delayed node's mutex locked, otherwise we will race with other tasks modifying the rbtrees and the counter. This is motivated by a previous version of another patch actually calling btrfs_release_delayed_item() after unlocking the delayed node's mutex and against a delayed item that is in a rbtree. So assert at __btrfs_remove_delayed_item() that the delayed node's mutex is locked. Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
2c58c3931e |
btrfs: remove BUG() after failure to insert delayed dir index item
Instead of calling BUG() when we fail to insert a delayed dir index item into the delayed node's tree, we can just release all the resources we have allocated/acquired before and return the error to the caller. This is fine because all existing call chains undo anything they have done before calling btrfs_insert_delayed_dir_index() or BUG_ON (when creating pending snapshots in the transaction commit path). So remove the BUG() call and do proper error handling. This relates to a syzbot report linked below, but does not fix it because it only prevents hitting a BUG(), it does not fix the issue where somehow we attempt to use twice the same index number for different index items. Link: https://lore.kernel.org/linux-btrfs/00000000000036e1290603e097e0@google.com/ CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
91bfe3104b |
btrfs: improve error message after failure to add delayed dir index item
If we fail to add a delayed dir index item because there's already another item with the same index number, we print an error message (and then BUG). However that message isn't very helpful to debug anything because we don't know what's the index number and what are the values of index counters in the inode and its delayed inode (index_cnt fields of struct btrfs_inode and struct btrfs_delayed_node). So update the error message to include the index number and counters. We actually had a recent case where this issue was hit by a syzbot report (see the link below). Link: https://lore.kernel.org/linux-btrfs/00000000000036e1290603e097e0@google.com/ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Qu Wenruo
|
5e0e879926 |
btrfs: fix a compilation error if DEBUG is defined in btree_dirty_folio
[BUG] After commit |
||
|
Josef Bacik
|
4ca8e03cf2 |
btrfs: check for BTRFS_FS_ERROR in pending ordered assert
If we do fast tree logging we increment a counter on the current transaction for every ordered extent we need to wait for. This means we expect the transaction to still be there when we clear pending on the ordered extent. However if we happen to abort the transaction and clean it up, there could be no running transaction, and thus we'll trip the "ASSERT(trans)" check. This is obviously incorrect, and the code properly deals with the case that the transaction doesn't exist. Fix this ASSERT() to only fire if there's no trans and we don't have BTRFS_FS_ERROR() set on the file system. CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
e110f8911d |
btrfs: fix lockdep splat and potential deadlock after failure running delayed items
When running delayed items we are holding a delayed node's mutex and then we will attempt to modify a subvolume btree to insert/update/delete the delayed items. However if have an error during the insertions for example, btrfs_insert_delayed_items() may return with a path that has locked extent buffers (a leaf at the very least), and then we attempt to release the delayed node at __btrfs_run_delayed_items(), which requires taking the delayed node's mutex, causing an ABBA type of deadlock. This was reported by syzbot and the lockdep splat is the following: WARNING: possible circular locking dependency detected 6.5.0-rc7-syzkaller-00024-g93f5de5f648d #0 Not tainted ------------------------------------------------------ syz-executor.2/13257 is trying to acquire lock: ffff88801835c0c0 (&delayed_node->mutex){+.+.}-{3:3}, at: __btrfs_release_delayed_node+0x9a/0xaa0 fs/btrfs/delayed-inode.c:256 but task is already holding lock: ffff88802a5ab8e8 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_lock+0x3c/0x2a0 fs/btrfs/locking.c:198 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (btrfs-tree-00){++++}-{3:3}: __lock_release kernel/locking/lockdep.c:5475 [inline] lock_release+0x36f/0x9d0 kernel/locking/lockdep.c:5781 up_write+0x79/0x580 kernel/locking/rwsem.c:1625 btrfs_tree_unlock_rw fs/btrfs/locking.h:189 [inline] btrfs_unlock_up_safe+0x179/0x3b0 fs/btrfs/locking.c:239 search_leaf fs/btrfs/ctree.c:1986 [inline] btrfs_search_slot+0x2511/0x2f80 fs/btrfs/ctree.c:2230 btrfs_insert_empty_items+0x9c/0x180 fs/btrfs/ctree.c:4376 btrfs_insert_delayed_item fs/btrfs/delayed-inode.c:746 [inline] btrfs_insert_delayed_items fs/btrfs/delayed-inode.c:824 [inline] __btrfs_commit_inode_delayed_items+0xd24/0x2410 fs/btrfs/delayed-inode.c:1111 __btrfs_run_delayed_items+0x1db/0x430 fs/btrfs/delayed-inode.c:1153 flush_space+0x269/0xe70 fs/btrfs/space-info.c:723 btrfs_async_reclaim_metadata_space+0x106/0x350 fs/btrfs/space-info.c:1078 process_one_work+0x92c/0x12c0 kernel/workqueue.c:2600 worker_thread+0xa63/0x1210 kernel/workqueue.c:2751 kthread+0x2b8/0x350 kernel/kthread.c:389 ret_from_fork+0x2e/0x60 arch/x86/kernel/process.c:145 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 -> #0 (&delayed_node->mutex){+.+.}-{3:3}: check_prev_add kernel/locking/lockdep.c:3142 [inline] check_prevs_add kernel/locking/lockdep.c:3261 [inline] validate_chain kernel/locking/lockdep.c:3876 [inline] __lock_acquire+0x39ff/0x7f70 kernel/locking/lockdep.c:5144 lock_acquire+0x1e3/0x520 kernel/locking/lockdep.c:5761 __mutex_lock_common+0x1d8/0x2530 kernel/locking/mutex.c:603 __mutex_lock kernel/locking/mutex.c:747 [inline] mutex_lock_nested+0x1b/0x20 kernel/locking/mutex.c:799 __btrfs_release_delayed_node+0x9a/0xaa0 fs/btrfs/delayed-inode.c:256 btrfs_release_delayed_node fs/btrfs/delayed-inode.c:281 [inline] __btrfs_run_delayed_items+0x2b5/0x430 fs/btrfs/delayed-inode.c:1156 btrfs_commit_transaction+0x859/0x2ff0 fs/btrfs/transaction.c:2276 btrfs_sync_file+0xf56/0x1330 fs/btrfs/file.c:1988 vfs_fsync_range fs/sync.c:188 [inline] vfs_fsync fs/sync.c:202 [inline] do_fsync fs/sync.c:212 [inline] __do_sys_fsync fs/sync.c:220 [inline] __se_sys_fsync fs/sync.c:218 [inline] __x64_sys_fsync+0x196/0x1e0 fs/sync.c:218 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(btrfs-tree-00); lock(&delayed_node->mutex); lock(btrfs-tree-00); lock(&delayed_node->mutex); *** DEADLOCK *** 3 locks held by syz-executor.2/13257: #0: ffff88802c1ee370 (btrfs_trans_num_writers){++++}-{0:0}, at: spin_unlock include/linux/spinlock.h:391 [inline] #0: ffff88802c1ee370 (btrfs_trans_num_writers){++++}-{0:0}, at: join_transaction+0xb87/0xe00 fs/btrfs/transaction.c:287 #1: ffff88802c1ee398 (btrfs_trans_num_extwriters){++++}-{0:0}, at: join_transaction+0xbb2/0xe00 fs/btrfs/transaction.c:288 #2: ffff88802a5ab8e8 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_lock+0x3c/0x2a0 fs/btrfs/locking.c:198 stack backtrace: CPU: 0 PID: 13257 Comm: syz-executor.2 Not tainted 6.5.0-rc7-syzkaller-00024-g93f5de5f648d #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106 check_noncircular+0x375/0x4a0 kernel/locking/lockdep.c:2195 check_prev_add kernel/locking/lockdep.c:3142 [inline] check_prevs_add kernel/locking/lockdep.c:3261 [inline] validate_chain kernel/locking/lockdep.c:3876 [inline] __lock_acquire+0x39ff/0x7f70 kernel/locking/lockdep.c:5144 lock_acquire+0x1e3/0x520 kernel/locking/lockdep.c:5761 __mutex_lock_common+0x1d8/0x2530 kernel/locking/mutex.c:603 __mutex_lock kernel/locking/mutex.c:747 [inline] mutex_lock_nested+0x1b/0x20 kernel/locking/mutex.c:799 __btrfs_release_delayed_node+0x9a/0xaa0 fs/btrfs/delayed-inode.c:256 btrfs_release_delayed_node fs/btrfs/delayed-inode.c:281 [inline] __btrfs_run_delayed_items+0x2b5/0x430 fs/btrfs/delayed-inode.c:1156 btrfs_commit_transaction+0x859/0x2ff0 fs/btrfs/transaction.c:2276 btrfs_sync_file+0xf56/0x1330 fs/btrfs/file.c:1988 vfs_fsync_range fs/sync.c:188 [inline] vfs_fsync fs/sync.c:202 [inline] do_fsync fs/sync.c:212 [inline] __do_sys_fsync fs/sync.c:220 [inline] __se_sys_fsync fs/sync.c:218 [inline] __x64_sys_fsync+0x196/0x1e0 fs/sync.c:218 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f3ad047cae9 Code: 28 00 00 00 75 (...) RSP: 002b:00007f3ad12510c8 EFLAGS: 00000246 ORIG_RAX: 000000000000004a RAX: ffffffffffffffda RBX: 00007f3ad059bf80 RCX: 00007f3ad047cae9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000005 RBP: 00007f3ad04c847a R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007f3ad059bf80 R15: 00007ffe56af92f8 </TASK> ------------[ cut here ]------------ Fix this by releasing the path before releasing the delayed node in the error path at __btrfs_run_delayed_items(). Reported-by: syzbot+a379155f07c134ea9879@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-btrfs/000000000000abba27060403b5bd@google.com/ CC: stable@vger.kernel.org # 4.14+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Josef Bacik
|
77d20c685b |
btrfs: do not block starts waiting on previous transaction commit
Internally I got a report of very long stalls on normal operations like
creating a new file when auto relocation was running. The reporter used
the 'bpf offcputime' tracer to show that we would get stuck in
start_transaction for 5 to 30 seconds, and were always being woken up by
the transaction commit.
Using my timing-everything script, which times how long a function takes
and what percentage of that total time is taken up by its children, I
saw several traces like this
1083 took 32812902424 ns
29929002926 ns 91.2110% wait_for_commit_duration
25568 ns 7.7920e-05% commit_fs_roots_duration
1007751 ns 0.00307% commit_cowonly_roots_duration
446855602 ns 1.36182% btrfs_run_delayed_refs_duration
271980 ns 0.00082% btrfs_run_delayed_items_duration
2008 ns 6.1195e-06% btrfs_apply_pending_changes_duration
9656 ns 2.9427e-05% switch_commit_roots_duration
1598 ns 4.8700e-06% btrfs_commit_device_sizes_duration
4314 ns 1.3147e-05% btrfs_free_log_root_tree_duration
Here I was only tracing functions that happen where we are between
START_COMMIT and UNBLOCKED in order to see what would be keeping us
blocked for so long. The wait_for_commit() we do is where we wait for a
previous transaction that hasn't completed it's commit. This can
include all of the unpin work and other cleanups, which tends to be the
longest part of our transaction commit.
There is no reason we should be blocking new things from entering the
transaction at this point, it just adds to random latency spikes for no
reason.
Fix this by adding a PREP stage. This allows us to properly deal with
multiple committers coming in at the same time, we retain the behavior
that the winner waits on the previous transaction and the losers all
wait for this transaction commit to occur. Nothing else is blocked
during the PREP stage, and then once the wait is complete we switch to
COMMIT_START and all of the same behavior as before is maintained.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
||
|
Filipe Manana
|
ee34a82e89 |
btrfs: release path before inode lookup during the ino lookup ioctl
During the ino lookup ioctl we can end up calling btrfs_iget() to get an
inode reference while we are holding on a root's btree. If btrfs_iget()
needs to lookup the inode from the root's btree, because it's not
currently loaded in memory, then it will need to lock another or the
same path in the same root btree. This may result in a deadlock and
trigger the following lockdep splat:
WARNING: possible circular locking dependency detected
6.5.0-rc7-syzkaller-00004-gf7757129e3de #0 Not tainted
------------------------------------------------------
syz-executor277/5012 is trying to acquire lock:
ffff88802df41710 (btrfs-tree-01){++++}-{3:3}, at: __btrfs_tree_read_lock+0x2f/0x220 fs/btrfs/locking.c:136
but task is already holding lock:
ffff88802df418e8 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x2f/0x220 fs/btrfs/locking.c:136
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (btrfs-tree-00){++++}-{3:3}:
down_read_nested+0x49/0x2f0 kernel/locking/rwsem.c:1645
__btrfs_tree_read_lock+0x2f/0x220 fs/btrfs/locking.c:136
btrfs_search_slot+0x13a4/0x2f80 fs/btrfs/ctree.c:2302
btrfs_init_root_free_objectid+0x148/0x320 fs/btrfs/disk-io.c:4955
btrfs_init_fs_root fs/btrfs/disk-io.c:1128 [inline]
btrfs_get_root_ref+0x5ae/0xae0 fs/btrfs/disk-io.c:1338
btrfs_get_fs_root fs/btrfs/disk-io.c:1390 [inline]
open_ctree+0x29c8/0x3030 fs/btrfs/disk-io.c:3494
btrfs_fill_super+0x1c7/0x2f0 fs/btrfs/super.c:1154
btrfs_mount_root+0x7e0/0x910 fs/btrfs/super.c:1519
legacy_get_tree+0xef/0x190 fs/fs_context.c:611
vfs_get_tree+0x8c/0x270 fs/super.c:1519
fc_mount fs/namespace.c:1112 [inline]
vfs_kern_mount+0xbc/0x150 fs/namespace.c:1142
btrfs_mount+0x39f/0xb50 fs/btrfs/super.c:1579
legacy_get_tree+0xef/0x190 fs/fs_context.c:611
vfs_get_tree+0x8c/0x270 fs/super.c:1519
do_new_mount+0x28f/0xae0 fs/namespace.c:3335
do_mount fs/namespace.c:3675 [inline]
__do_sys_mount fs/namespace.c:3884 [inline]
__se_sys_mount+0x2d9/0x3c0 fs/namespace.c:3861
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
-> #0 (btrfs-tree-01){++++}-{3:3}:
check_prev_add kernel/locking/lockdep.c:3142 [inline]
check_prevs_add kernel/locking/lockdep.c:3261 [inline]
validate_chain kernel/locking/lockdep.c:3876 [inline]
__lock_acquire+0x39ff/0x7f70 kernel/locking/lockdep.c:5144
lock_acquire+0x1e3/0x520 kernel/locking/lockdep.c:5761
down_read_nested+0x49/0x2f0 kernel/locking/rwsem.c:1645
__btrfs_tree_read_lock+0x2f/0x220 fs/btrfs/locking.c:136
btrfs_tree_read_lock fs/btrfs/locking.c:142 [inline]
btrfs_read_lock_root_node+0x292/0x3c0 fs/btrfs/locking.c:281
btrfs_search_slot_get_root fs/btrfs/ctree.c:1832 [inline]
btrfs_search_slot+0x4ff/0x2f80 fs/btrfs/ctree.c:2154
btrfs_lookup_inode+0xdc/0x480 fs/btrfs/inode-item.c:412
btrfs_read_locked_inode fs/btrfs/inode.c:3892 [inline]
btrfs_iget_path+0x2d9/0x1520 fs/btrfs/inode.c:5716
btrfs_search_path_in_tree_user fs/btrfs/ioctl.c:1961 [inline]
btrfs_ioctl_ino_lookup_user+0x77a/0xf50 fs/btrfs/ioctl.c:2105
btrfs_ioctl+0xb0b/0xd40 fs/btrfs/ioctl.c:4683
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl+0xf8/0x170 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
rlock(btrfs-tree-00);
lock(btrfs-tree-01);
lock(btrfs-tree-00);
rlock(btrfs-tree-01);
*** DEADLOCK ***
1 lock held by syz-executor277/5012:
#0: ffff88802df418e8 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x2f/0x220 fs/btrfs/locking.c:136
stack backtrace:
CPU: 1 PID: 5012 Comm: syz-executor277 Not tainted 6.5.0-rc7-syzkaller-00004-gf7757129e3de #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106
check_noncircular+0x375/0x4a0 kernel/locking/lockdep.c:2195
check_prev_add kernel/locking/lockdep.c:3142 [inline]
check_prevs_add kernel/locking/lockdep.c:3261 [inline]
validate_chain kernel/locking/lockdep.c:3876 [inline]
__lock_acquire+0x39ff/0x7f70 kernel/locking/lockdep.c:5144
lock_acquire+0x1e3/0x520 kernel/locking/lockdep.c:5761
down_read_nested+0x49/0x2f0 kernel/locking/rwsem.c:1645
__btrfs_tree_read_lock+0x2f/0x220 fs/btrfs/locking.c:136
btrfs_tree_read_lock fs/btrfs/locking.c:142 [inline]
btrfs_read_lock_root_node+0x292/0x3c0 fs/btrfs/locking.c:281
btrfs_search_slot_get_root fs/btrfs/ctree.c:1832 [inline]
btrfs_search_slot+0x4ff/0x2f80 fs/btrfs/ctree.c:2154
btrfs_lookup_inode+0xdc/0x480 fs/btrfs/inode-item.c:412
btrfs_read_locked_inode fs/btrfs/inode.c:3892 [inline]
btrfs_iget_path+0x2d9/0x1520 fs/btrfs/inode.c:5716
btrfs_search_path_in_tree_user fs/btrfs/ioctl.c:1961 [inline]
btrfs_ioctl_ino_lookup_user+0x77a/0xf50 fs/btrfs/ioctl.c:2105
btrfs_ioctl+0xb0b/0xd40 fs/btrfs/ioctl.c:4683
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl+0xf8/0x170 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f0bec94ea39
Fix this simply by releasing the path before calling btrfs_iget() as at
point we don't need the path anymore.
Reported-by: syzbot+bf66ad948981797d2f1d@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/00000000000045fa140603c4a969@google.com/
Fixes:
|
||
|
Filipe Manana
|
2d6cd791e6 |
btrfs: fix race between finishing block group creation and its item update
Commit |
||
|
Zhenhua Huang
|
f875db4f20 |
Revert "dma-contiguous: check for memory region overlap"
This reverts commit
|
||
|
Liu Jian
|
ac28b1ec61 |
net: ipv4: fix one memleak in __inet_del_ifa()
I got the below warning when do fuzzing test:
unregister_netdevice: waiting for bond0 to become free. Usage count = 2
It can be repoduced via:
ip link add bond0 type bond
sysctl -w net.ipv4.conf.bond0.promote_secondaries=1
ip addr add 4.117.174.103/0 scope 0x40 dev bond0
ip addr add 192.168.100.111/255.255.255.254 scope 0 dev bond0
ip addr add 0.0.0.4/0 scope 0x40 secondary dev bond0
ip addr del 4.117.174.103/0 scope 0x40 dev bond0
ip link delete bond0 type bond
In this reproduction test case, an incorrect 'last_prim' is found in
__inet_del_ifa(), as a result, the secondary address(0.0.0.4/0 scope 0x40)
is lost. The memory of the secondary address is leaked and the reference of
in_device and net_device is leaked.
Fix this problem:
Look for 'last_prim' starting at location of the deleted IP and inserting
the promoted IP into the location of 'last_prim'.
Fixes:
|
||
|
Linus Torvalds
|
a48fa7efaf |
drm fixes for 6.6-rc1
amdgpu: - Display replay fixes - Fixes for headless boards - Fix documentation breakage - RAS fixes - Handle newer IP discovery tables - SMU 13.0.6 fixes - SR-IOV fixes - Display vstartup fixes - NBIO 7.9 fixes - Display scaling mode fixes - Debugfs power reporting fix - GC 9.4.3 fixes - Dirty framebuffer fixes for fbcon - eDP fixes - DCN 3.1.5 fix - Display ODM fixes - GPU core dump fix - Re-enable zops property now that IGT test is fixed - Fix possible UAF in CS code - Cursor degamma fix amdkfd: - HMM fixes - Interrupt masking fix - GFX11 MQD fixes i915: - Mark requests for GuC virtual engines to avoid use-after-free nouveau: - Fix fence state in nouveau_fence_emit() ivpu: - replace strncpy -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmT6ihUACgkQDHTzWXnE hr6Vqg/+OGfbxx0qev5C93bLYpg8d4zbply0zTed2hU48zczARkOyDH+h2uYM4tP rmB6mK/0KRy3H8vkngKduR/IF6QBwzOnLDpS+C/TrHYQYqMDwvs3qEDVYqXh3V5H GPIFuu9sb2Nb/o9Fid70pvNACbgGsAUgqMUhQ/is3NjzOR8S/qjdBQ7wSdoUoOqx okTdlwuMK5SEYrihSyTZvhNcwpR/1L8JuxOUXXXUSQ0tRXBer/ZNF2lcEyYmQ0zs bZHKM4dNbdew/EhygbH6LVB5RjFaT5pGw08Xm8zJry+q5tXQV/NIXPQHL3vWqQoX i2QLbvGX/Uu8LJg9YNdsa1kPwNKADAxF64cW38Llv8ybsPHyva/I255j689/TvSG Se7HkTooURKS6GWFHPOkyMNC0Y+Fb/7WG5zUPSDVk9stqJz9pzx48okTsCWeuovD cBOssp8If1QsTyPvDq5A47l5z1oO3J1rdJ9fL0GnpOuXulPhgJGIoUSkftyI6lbw rhUoRd7w6VcgOsA9WIkAf+/325em0Y0AKZBgQnr2jfF56IE4iLa8yFuJNeReZ9oy W9yf14AB0orVm9+P4+PqATXBh+PdCTD1CPcB0MyK1SZAjh836Tc0HPKvJAUU6jp+ 8aw3BKXcaLjIP/dCyhSddXCnuuTPWreff5isktwgEXUtNFv9jx0= =fPeN -----END PGP SIGNATURE----- Merge tag 'drm-next-2023-09-08' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "Regular rounds of rc1 fixes, a large bunch for amdgpu since it's three weeks in one go, one i915, one nouveau and one ivpu. I think there might be a few more fixes in misc that I haven't pulled in yet, but we should get them all for rc2. amdgpu: - Display replay fixes - Fixes for headless boards - Fix documentation breakage - RAS fixes - Handle newer IP discovery tables - SMU 13.0.6 fixes - SR-IOV fixes - Display vstartup fixes - NBIO 7.9 fixes - Display scaling mode fixes - Debugfs power reporting fix - GC 9.4.3 fixes - Dirty framebuffer fixes for fbcon - eDP fixes - DCN 3.1.5 fix - Display ODM fixes - GPU core dump fix - Re-enable zops property now that IGT test is fixed - Fix possible UAF in CS code - Cursor degamma fix amdkfd: - HMM fixes - Interrupt masking fix - GFX11 MQD fixes i915: - Mark requests for GuC virtual engines to avoid use-after-free nouveau: - Fix fence state in nouveau_fence_emit() ivpu: - replace strncpy" * tag 'drm-next-2023-09-08' of git://anongit.freedesktop.org/drm/drm: (51 commits) drm/amdgpu: Restrict bootloader wait to SMUv13.0.6 drm/amd/display: prevent potential division by zero errors drm/amd/display: enable cursor degamma for DCN3+ DRM legacy gamma drm/amd/display: limit the v_startup workaround to ASICs older than DCN3.1 Revert "drm/amd/display: Remove v_startup workaround for dcn3+" drm/amdgpu: fix amdgpu_cs_p1_user_fence Revert "Revert "drm/amd/display: Implement zpos property"" drm/amdkfd: Add missing gfx11 MQD manager callbacks drm/amdgpu: Free ras cmd input buffer properly drm/amdgpu: Hide xcp partition sysfs under SRIOV drm/amdgpu: use read-modify-write mode for gfx v9_4_3 SQ setting drm/amdkfd: use mask to get v9 interrupt sq data bits correctly drm/amdgpu: Allocate coredump memory in a nonblocking way drm/amdgpu: Support query ecc cap for aqua_vanjaram drm/amdgpu: Add umc_info v4_0 structure drm/amd/display: always switch off ODM before committing more streams drm/amd/display: Remove wait while locked drm/amd/display: update blank state on ODM changes drm/amd/display: Add smu write msg id fail retry process drm/amdgpu: Add SMU v13.0.6 default reset methods ... |
||
|
Linus Torvalds
|
73be7fb14e |
Including fixes from netfilter and bpf.
Current release - regressions:
- eth: stmmac: fix failure to probe without MAC interface specified
Current release - new code bugs:
- docs: netlink: fix missing classic_netlink doc reference
Previous releases - regressions:
- deal with integer overflows in kmalloc_reserve()
- use sk_forward_alloc_get() in sk_get_meminfo()
- bpf_sk_storage: fix the missing uncharge in sk_omem_alloc
- fib: avoid warn splat in flow dissector after packet mangling
- skb_segment: call zero copy functions before using skbuff frags
- eth: sfc: check for zero length in EF10 RX prefix
Previous releases - always broken:
- af_unix: fix msg_controllen test in scm_pidfd_recv() for
MSG_CMSG_COMPAT
- xsk: fix xsk_build_skb() dereferencing possible ERR_PTR()
- netfilter:
- nft_exthdr: fix non-linear header modification
- xt_u32, xt_sctp: validate user space input
- nftables: exthdr: fix 4-byte stack OOB write
- nfnetlink_osf: avoid OOB read
- one more fix for the garbage collection work from last release
- igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU
- bpf, sockmap: fix preempt_rt splat when using raw_spin_lock_t
- handshake: fix null-deref in handshake_nl_done_doit()
- ip: ignore dst hint for multipath routes to ensure packets
are hashed across the nexthops
- phy: micrel:
- correct bit assignments for cable test errata
- disable EEE according to the KSZ9477 errata
Misc:
- docs/bpf: document compile-once-run-everywhere (CO-RE) relocations
- Revert "net: macsec: preserve ingress frame ordering", it appears
to have been developed against an older kernel, problem doesn't
exist upstream
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=YpmE
-----END PGP SIGNATURE-----
Merge tag 'net-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking updates from Jakub Kicinski:
"Including fixes from netfilter and bpf.
Current release - regressions:
- eth: stmmac: fix failure to probe without MAC interface specified
Current release - new code bugs:
- docs: netlink: fix missing classic_netlink doc reference
Previous releases - regressions:
- deal with integer overflows in kmalloc_reserve()
- use sk_forward_alloc_get() in sk_get_meminfo()
- bpf_sk_storage: fix the missing uncharge in sk_omem_alloc
- fib: avoid warn splat in flow dissector after packet mangling
- skb_segment: call zero copy functions before using skbuff frags
- eth: sfc: check for zero length in EF10 RX prefix
Previous releases - always broken:
- af_unix: fix msg_controllen test in scm_pidfd_recv() for
MSG_CMSG_COMPAT
- xsk: fix xsk_build_skb() dereferencing possible ERR_PTR()
- netfilter:
- nft_exthdr: fix non-linear header modification
- xt_u32, xt_sctp: validate user space input
- nftables: exthdr: fix 4-byte stack OOB write
- nfnetlink_osf: avoid OOB read
- one more fix for the garbage collection work from last release
- igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU
- bpf, sockmap: fix preempt_rt splat when using raw_spin_lock_t
- handshake: fix null-deref in handshake_nl_done_doit()
- ip: ignore dst hint for multipath routes to ensure packets are
hashed across the nexthops
- phy: micrel:
- correct bit assignments for cable test errata
- disable EEE according to the KSZ9477 errata
Misc:
- docs/bpf: document compile-once-run-everywhere (CO-RE) relocations
- Revert "net: macsec: preserve ingress frame ordering", it appears
to have been developed against an older kernel, problem doesn't
exist upstream"
* tag 'net-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
net: enetc: distinguish error from valid pointers in enetc_fixup_clear_rss_rfs()
Revert "net: team: do not use dynamic lockdep key"
net: hns3: remove GSO partial feature bit
net: hns3: fix the port information display when sfp is absent
net: hns3: fix invalid mutex between tc qdisc and dcb ets command issue
net: hns3: fix debugfs concurrency issue between kfree buffer and read
net: hns3: fix byte order conversion issue in hclge_dbg_fd_tcam_read()
net: hns3: Support query tx timeout threshold by debugfs
net: hns3: fix tx timeout issue
net: phy: Provide Module 4 KSZ9477 errata (DS80000754C)
netfilter: nf_tables: Unbreak audit log reset
netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c
netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction
netfilter: nf_tables: uapi: Describe NFTA_RULE_CHAIN_ID
netfilter: nfnetlink_osf: avoid OOB read
netfilter: nftables: exthdr: fix 4-byte stack OOB write
selftests/bpf: Check bpf_sk_storage has uncharged sk_omem_alloc
bpf: bpf_sk_storage: Fix the missing uncharge in sk_omem_alloc
bpf: bpf_sk_storage: Fix invalid wait context lockdep report
s390/bpf: Pass through tail call counter in trampolines
...
|
||
|
Linus Torvalds
|
2ab35ce202 |
Devicetree fixes for v6.6, part 1:
- Convert st,stih407-irq-syscfg and Omnivision OV7251 bindings to DT
schema
- Merge Omnivision OV5695 into OV5693 binding
- Fix of_overlay_fdt_apply prototype when !CONFIG_OF_OVERLAY
-----BEGIN PGP SIGNATURE-----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=n+1p
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
"A couple of conversions which didn't get picked up by the subsystems
and one fix:
- Convert st,stih407-irq-syscfg and Omnivision OV7251 bindings to DT
schema
- Merge Omnivision OV5695 into OV5693 binding
- Fix of_overlay_fdt_apply prototype when !CONFIG_OF_OVERLAY"
* tag 'devicetree-fixes-for-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: irqchip: convert st,stih407-irq-syscfg to DT schema
media: dt-bindings: Convert Omnivision OV7251 to DT schema
media: dt-bindings: Merge OV5695 into OV5693 binding
of: overlay: Fix of_overlay_fdt_apply prototype when !CONFIG_OF_OVERLAY
|
||
|
Linus Torvalds
|
8d844b3518 |
pwm: Changes for v6.6-rc1
This contains various cleanups and fixes across the board. -----BEGIN PGP SIGNATURE----- iQJNBAABCAA3FiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmT55DMZHHRoaWVycnku cmVkaW5nQGdtYWlsLmNvbQAKCRDdI6zXfz6zoZHtEACJJRp36f/VBNHIkdIHlgnY OA1ScjwsLSmavWo6IJtGM/iAawnNBnKyMNymWjjs6240cNlXmIjQBvEX0zkRVsrp kuREZS0o5yS1kaM9QMXpur6HLNqwKxFGIzvUlcN2IB+myCBxfEQ/KlR3u3vRdQyH yB+9dvpAS1iRU957WcmdAtnid1j3mwxbFnNBMPp9iV7iH0Lg1TDSHuf1OCxc8lnP BZhS0zOjLUY8Eyo/pDkI9IIA4lXIg/JH9Ux4n88Ag84UiU/Q12APyT6R5nClK8Cr 0+LUHzjL4ZJbGdUkHyJtfzIGaO0Qy8TTgn7irPQChdIVTehhH5T4Uzl7v0EFudWi qz3BeGnOlFlhQG0WdAwH8pYYeTIVOn5HjjXQunmk36e1b+FNg5baQZ7gInry172b HT9KmDGfFBaDME1mZ4IayCvmjRIuoFWI6GtS/ykPBOTd58CjytMJD+khuTUwkUSd D5KAakc70JYBHQLzsRZExiP5RwxJ8LChmwF4yBfROF0S7KCL84R4pbEMLZ0ko08g bcxyZ8yHoTEpRxg332B1M/A/KFAMPiit0qK3LnuGdP0B73GFBb9mGvgwb6vwzRx1 Vo6Ewr8A3wZAL56rzXPFvabnMblzvHbuNQTMFkJLhA+doI4n3Oq+KW1u7Cf4ygEF qGOFsQsphAHZFrIob8xleg== =kax5 -----END PGP SIGNATURE----- Merge tag 'pwm/for-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "Various cleanups and fixes across the board" * tag 'pwm/for-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (31 commits) pwm: lpc32xx: Remove handling of PWM channels pwm: atmel: Simplify using devm functions dt-bindings: pwm: brcm,kona-pwm: convert to YAML pwm: stmpe: Handle errors when disabling the signal pwm: stm32: Simplify using devm_pwmchip_add() pwm: stm32: Don't modify HW state in .remove() callback pwm: Fix order of freeing resources in pwmchip_remove() pwm: ntxec: Use device_set_of_node_from_dev() pwm: ntxec: Drop a write-only variable from driver data pwm: pxa: Don't reimplement of_device_get_match_data() pwm: lpc18xx-sct: Simplify using devm_clk_get_enabled() pwm: atmel-tcb: Don't track polarity in driver data pwm: atmel-tcb: Unroll atmel_tcb_pwm_set_polarity() into only caller pwm: atmel-tcb: Put per-channel data into driver data pwm: atmel-tcb: Fix resource freeing in error path and remove pwm: atmel-tcb: Harmonize resource allocation order pwm: Drop unused #include <linux/radix-tree.h> pwm: rz-mtu3: Fix build warning 'num_channel_ios' not described pwm: Remove outdated documentation for pwmchip_remove() pwm: atmel: Enable clk when pwm already enabled in bootloader ... |
||
|
Dave Airlie
|
43ffcd6fa1 |
amd-drm-fixes-6.6-2023-09-06:
amdgpu: - Display replay fixes - Fixes for headless boards - Fix documentation breakage - RAS fixes - Handle newer IP discovery tables - SMU 13.0.6 fixes - SR-IOV fixes - Display vstartup fixes - NBIO 7.9 fixes - Display scaling mode fixes - Debugfs power reporting fix - GC 9.4.3 fixes - Dirty framebuffer fixes for fbcon - eDP fixes - DCN 3.1.5 fix - Display ODM fixes - GPU core dump fix - Re-enable zops property now that IGT test is fixed - Fix possible UAF in CS code - Cursor degamma fix amdkfd: - HMM fixes - Interrupt masking fix - GFX11 MQD fixes -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQQgO5Idg2tXNTSZAr293/aFa7yZ2AUCZPlCNAAKCRC93/aFa7yZ 2GIlAQCTx8gqUpVWHFEOsSRlXolRjKuxSoXDSVqIk2NeLsinkAD+IloIWGnyxCtZ kDsFydAwHoYMT8MZJso4iWROif7tjwM= =52hg -----END PGP SIGNATURE----- Merge tag 'amd-drm-fixes-6.6-2023-09-06' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-fixes-6.6-2023-09-06: amdgpu: - Display replay fixes - Fixes for headless boards - Fix documentation breakage - RAS fixes - Handle newer IP discovery tables - SMU 13.0.6 fixes - SR-IOV fixes - Display vstartup fixes - NBIO 7.9 fixes - Display scaling mode fixes - Debugfs power reporting fix - GC 9.4.3 fixes - Dirty framebuffer fixes for fbcon - eDP fixes - DCN 3.1.5 fix - Display ODM fixes - GPU core dump fix - Re-enable zops property now that IGT test is fixed - Fix possible UAF in CS code - Cursor degamma fix amdkfd: - HMM fixes - Interrupt masking fix - GFX11 MQD fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230907033049.7811-1-alexander.deucher@amd.com |
||
|
Dave Airlie
|
51eed9d4ce |
- Mark requests for GuC virtual engines to avoid use-after-free (Andrzej).
-----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmTxBb8ACgkQ+mJfZA7r E8oO+wf+MCMDTGW5eFRsr0JFgUo6mvcKqrNQjAKro+BaHK/Y/uvbOK1/IAMBjsC2 H48G5Pnli2GVpSbsmjKlZgZwIcuZQmeiGktgHULDMlEpcL6703GJEHsaktlgDlEw EGsr6eE5ElWkAcQq/w5Hs2O0CsNbpT1SUjJXKFBMhX5BvhBmaK+oU4beenqfzyC8 ngxn65z0btZ2AtmQ8I56cxCUrLPjPY2epu10XIvr5euXG+Qzj5qr6smSHSyFbA+8 C5YK/vGxWxtppF2kdQc8hjCW5VSWzLLGttsEN+rgYufaHHcpGhAgTLpVH/KSF+iJ NbbIckdkacZOILFsnEEm0hLtIZXuLA== =CO5h -----END PGP SIGNATURE----- Merge tag 'drm-intel-next-fixes-2023-08-31' of git://anongit.freedesktop.org/drm/drm-intel into drm-next - Mark requests for GuC virtual engines to avoid use-after-free (Andrzej). Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZPEGEeP2EwCtx9hM@intel.com |
||
|
Linus Torvalds
|
ff6e6ded54 |
RTC for 6.6
Subsystem:
- Add a way for drivers to tell the core the supported alarm range is smaller
than the date range. This is not used yet but will be useful for the
alarmtimers in the next release.
- fix Wvoid-pointer-to-enum-cast warnings
- remove redundant of_match_ptr()
- stop warning for invalid alarms when the alarm is disabled
Drivers:
- isl12022: allow setting the trip level for battery level detection
- pcf2127: add support for PCF2131 and multiple timestamps
- stm32: time precision improvement, many fixes
- twl: NVRAM support
-----BEGIN PGP SIGNATURE-----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=4kkJ
-----END PGP SIGNATURE-----
Merge tag 'rtc-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- Add a way for drivers to tell the core the supported alarm range is
smaller than the date range. This is not used yet but will be
useful for the alarmtimers in the next release.
- fix Wvoid-pointer-to-enum-cast warnings
- remove redundant of_match_ptr()
- stop warning for invalid alarms when the alarm is disabled
Drivers:
- isl12022: allow setting the trip level for battery level detection
- pcf2127: add support for PCF2131 and multiple timestamps
- stm32: time precision improvement, many fixes
- twl: NVRAM support"
* tag 'rtc-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (73 commits)
dt-bindings: rtc: ds3231: Remove text binding
rtc: wm8350: remove unnecessary messages
rtc: twl: remove unnecessary messages
rtc: sun6i: remove unnecessary message
rtc: stop warning for invalid alarms when the alarm is disabled
rtc: twl: add NVRAM support
rtc: pcf85363: Allow to wake up system without IRQ
rtc: m48t86: add DT support for m48t86
dt-bindings: rtc: Add ST M48T86
rtc: pcf2127: remove useless check
rtc: rzn1: Report maximum alarm limit to rtc core
rtc: ds1305: Report maximum alarm limit to rtc core
rtc: tps6586x: Report maximum alarm limit to rtc core
rtc: cmos: Report supported alarm limit to rtc infrastructure
rtc: cros-ec: Detect and report supported alarm window size
rtc: Add support for limited alarm timer offsets
rtc: isl1208: Fix incorrect logic in isl1208_set_xtoscb()
MAINTAINERS: remove obsolete pattern in RTC SUBSYSTEM section
rtc: tps65910: Remove redundant dev_warn() and do not check for 0 return after calling platform_get_irq()
rtc: omap: Do not check for 0 return after calling platform_get_irq()
...
|
||
|
Linus Torvalds
|
e59a698b2d |
I3C for 6.6
Core: - Fix SETDASA when static and dynamic adress are equal - Fix cmd_v1 DAA exit criteria Drivers: - svc: allow probing without any device -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEBqsFVZXh8s/0O5JiY6TcMGxwOjIFAmT49e4ACgkQY6TcMGxw OjLM/g//R0z4u82PTEzefslGWmwiap6uH4cXV3HofXIyk7hsYG+81Z3evdqaaIjQ rg+rGdXP4tt0VUmhEYtuYoM2NeNGaSm6FPa7FcF5qcquSvPW9TGtyCLX2T4L93ns CQC7CQah0XAnFresoMtvvSOfFJ6mz3EUzWR35n386L3t9ap1f7P87Gl9d7dyIwf7 bmbV2yAc0ezITTDyqTEUiFIBE+wupt9b1go5nY9i/F4DyxDx9xZhPT2ryaA2lEfQ dzBkz9i8PnrawURdG1zjnGGalIaq7g6djXIUJ1g2SZ3pMHt77OZtFgU63UD7/LcU NiXHi1CXJA5iwXVNpp3yA09xtwWwrV5hIoPqN4A1eQqArbS/nMl+mOGAbL40JVkd nkE2SmFXUWBBYI6UDnuDXhpmgwbFk6jWWV3mmuMxJwAjEXIHNmzgIlX8J2o+dAyA JVFzJGBcgUtto6Kklrv49cRzdycuVw28JPro8TL2Fodpp4EuK+7R1QfDE9Lejnxf aAScSf0EoHCaIik3NxxXb8WYB+LO1QQPUMKZkN9TZ9jTYxjBViE3POyUChmMmW/U zWggD8ky6yTJPZuuyE++KlqbkQMPowI77PUkYGYXxtj+QH09I9kPJk03G/AAeqrm rsnwYAddRZfUknvGOXPfDHw0wY/7Y9UHG1Keg9UFl8XZevZNJfc= =av5t -----END PGP SIGNATURE----- Merge tag 'i3c/for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux Pull i3c updates from Alexandre Belloni: "Core: - Fix SETDASA when static and dynamic adress are equal - Fix cmd_v1 DAA exit criteria Drivers: - svc: allow probing without any device" * tag 'i3c/for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: i3c: master: svc: fix probe failure when no i3c device exist i3c: master: Fix SETDASA process dt-bindings: i3c: Fix description for assigned-address i3c: master: svc: Describe member 'saved_regs' i3c: master: svc: Do not check for 0 return after calling platform_get_irq() i3c/master: cmd_v1: Fix the exit criteria for the daa procedure i3c: Explicitly include correct DT includes |
||
|
Linus Torvalds
|
d9b9ea589b |
regulator: Fixes for v6.6
A couple of fixes that came in during the merge window, both driver specific - one for a bug that came up in testing, one for a bug due to a misreading of the datasheet. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmT5wtcACgkQJNaLcl1U h9D42Qf+LB9UYFJKAXPyLkpQYGHKbSaqz6hIMFWjmpsVjvuahI63wVRv/GoPZDIU B1Zy8mrC4t37BK/CmjlwvxVFPuY+DaYTTBjjnSEnfrDsQZ+PgfIRmfqzxp/q6TYr cpDOg/HrLkvfzNoTVtnUDz4Kn1l66OAMWXlwZ/AZEW8uD/JY172H7tBfjqDdzDvc NCxKW0FO/pX07kc1IFaPl6UvZRqJLQUkYl7dKFl7PrG6Lzh1+FKQSUmtZY33Ndgd LqFux/mc3jsV5E6Y0F899Lf1890VxzYHpbwT1QrHdaXhbqoACrQoaFfLfvd5YQLY K9ncwzj8hNM87t0LYLH09lSsH5L2Xw== =UyE6 -----END PGP SIGNATURE----- Merge tag 'regulator-fix-v6.6-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "A couple of fixes that came in during the merge window, both driver specific - one for a bug that came up in testing, one for a bug due to a misreading of the datasheet" * tag 'regulator-fix-v6.6-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: tps6594-regulator: Fix random kernel crash regulator: tps6287x: Fix n_voltages |
||
|
Linus Torvalds
|
32904dec06 |
spi: Fixes for v6.6
A couple of fixes for the sun6i driver, the patch to reduce DMA RX to single byte width all the time is *hopefully* excessively cautious but it's unclear which SoCs are affected so the fix just covers everything for safety. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmT5wQ0ACgkQJNaLcl1U h9Bltgf/T7tViGF1+g0fUx7Nlju+h8Hg3qBhlE+VKwRO6/qjBczT4ny4nkiej+CK IapuEDul+F56Cy4/dgyFQkICTCm7qGev+r7Oya0OCWqAiXif5fz/zfxc4rHUzRA9 lZrdWrYNxhlAqcDu80G00nh5Gx5UCpTHEriWJQUQ0oxXGQoPRPW2WczMsksF6QLs gnqr7hhIWzSvj0OOHVWi6a1iOMVgw0ICEgUF6TSoDsMOzvi6c1WVnCLZaE6udWhv 0wwOBzH1YBbwhfK/RdjUcSfHIy/jI2Gs7BnrUWviIfQSCb90V9YvAGlgusJAR4Ks Y5UM3d8pVxQg5tW75IFjMt/fic6Rfg== =HZqv -----END PGP SIGNATURE----- Merge tag 'spi-fix-v6.6-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A couple of fixes for the sun6i driver. The patch to reduce DMA RX to single byte width all the time is *hopefully* excessively cautious but it's unclear which SoCs are affected so the fix just covers everything for safety" * tag 'spi-fix-v6.6-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: sun6i: fix race between DMA RX transfer completion and RX FIFO drain spi: sun6i: reduce DMA RX transfer width to single byte |
||
|
Linus Torvalds
|
0c02183427 |
ARM:
* Clean up vCPU targets, always returning generic v8 as the preferred target
* Trap forwarding infrastructure for nested virtualization (used for traps
that are taken from an L2 guest and are needed by the L1 hypervisor)
* FEAT_TLBIRANGE support to only invalidate specific ranges of addresses
when collapsing a table PTE to a block PTE. This avoids that the guest
refills the TLBs again for addresses that aren't covered by the table PTE.
* Fix vPMU issues related to handling of PMUver.
* Don't unnecessary align non-stack allocations in the EL2 VA space
* Drop HCR_VIRT_EXCP_MASK, which was never used...
* Don't use smp_processor_id() in kvm_arch_vcpu_load(),
but the cpu parameter instead
* Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()
* Remove prototypes without implementations
RISC-V:
* Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest
* Added ONE_REG interface for SATP mode
* Added ONE_REG interface to enable/disable multiple ISA extensions
* Improved error codes returned by ONE_REG interfaces
* Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V
* Added get-reg-list selftest for KVM RISC-V
s390:
* PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)
Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.
* Guest debug fixes (Ilya)
x86:
* Clean up KVM's handling of Intel architectural events
* Intel bugfixes
* Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use debug
registers and generate/handle #DBs
* Clean up LBR virtualization code
* Fix a bug where KVM fails to set the target pCPU during an IRTE update
* Fix fatal bugs in SEV-ES intrahost migration
* Fix a bug where the recent (architecturally correct) change to reinject
#BP and skip INT3 broke SEV guests (can't decode INT3 to skip it)
* Retry APIC map recalculation if a vCPU is added/enabled
* Overhaul emergency reboot code to bring SVM up to par with VMX, tie the
"emergency disabling" behavior to KVM actually being loaded, and move all of
the logic within KVM
* Fix user triggerable WARNs in SVM where KVM incorrectly assumes the TSC
ratio MSR cannot diverge from the default when TSC scaling is disabled
up related code
* Add a framework to allow "caching" feature flags so that KVM can check if
the guest can use a feature without needing to search guest CPUID
* Rip out the ancient MMU_DEBUG crud and replace the useful bits with
CONFIG_KVM_PROVE_MMU
* Fix KVM's handling of !visible guest roots to avoid premature triple fault
injection
* Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the API surface
that is needed by external users (currently only KVMGT), and fix a variety
of issues in the process
This last item had a silly one-character bug in the topic branch that
was sent to me. Because it caused pretty bad selftest failures in
some configurations, I decided to squash in the fix. So, while the
exact commit ids haven't been in linux-next, the code has (from the
kvm-x86 tree).
Generic:
* Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier events to pass
action specific data without needing to constantly update the main handlers.
* Drop unused function declarations
Selftests:
* Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
* Add support for printf() in guest code and covert all guest asserts to use
printf-based reporting
* Clean up the PMU event filter test and add new testcases
* Include x86 selftests in the KVM x86 MAINTAINERS entry
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmT1m0kUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMNgggAiN7nz6UC423FznuI+yO3TLm8tkx1
CpKh5onqQogVtchH+vrngi97cfOzZb1/AtifY90OWQi31KEWhehkeofcx7G6ERhj
5a9NFADY1xGBsX4exca/VHDxhnzsbDWaWYPXw5vWFWI6erft9Mvy3tp1LwTvOzqM
v8X4aWz+g5bmo/DWJf4Wu32tEU6mnxzkrjKU14JmyqQTBawVmJ3RYvHVJ/Agpw+n
hRtPAy7FU6XTdkmq/uCT+KUHuJEIK0E/l1js47HFAqSzwdW70UDg14GGo1o4ETxu
RjZQmVNvL57yVgi6QU38/A0FWIsWQm5IlaX1Ug6x8pjZPnUKNbo9BY4T1g==
=W+4p
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Clean up vCPU targets, always returning generic v8 as the preferred
target
- Trap forwarding infrastructure for nested virtualization (used for
traps that are taken from an L2 guest and are needed by the L1
hypervisor)
- FEAT_TLBIRANGE support to only invalidate specific ranges of
addresses when collapsing a table PTE to a block PTE. This avoids
that the guest refills the TLBs again for addresses that aren't
covered by the table PTE.
- Fix vPMU issues related to handling of PMUver.
- Don't unnecessary align non-stack allocations in the EL2 VA space
- Drop HCR_VIRT_EXCP_MASK, which was never used...
- Don't use smp_processor_id() in kvm_arch_vcpu_load(), but the cpu
parameter instead
- Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()
- Remove prototypes without implementations
RISC-V:
- Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest
- Added ONE_REG interface for SATP mode
- Added ONE_REG interface to enable/disable multiple ISA extensions
- Improved error codes returned by ONE_REG interfaces
- Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V
- Added get-reg-list selftest for KVM RISC-V
s390:
- PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)
Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.
- Guest debug fixes (Ilya)
x86:
- Clean up KVM's handling of Intel architectural events
- Intel bugfixes
- Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use
debug registers and generate/handle #DBs
- Clean up LBR virtualization code
- Fix a bug where KVM fails to set the target pCPU during an IRTE
update
- Fix fatal bugs in SEV-ES intrahost migration
- Fix a bug where the recent (architecturally correct) change to
reinject #BP and skip INT3 broke SEV guests (can't decode INT3 to
skip it)
- Retry APIC map recalculation if a vCPU is added/enabled
- Overhaul emergency reboot code to bring SVM up to par with VMX, tie
the "emergency disabling" behavior to KVM actually being loaded,
and move all of the logic within KVM
- Fix user triggerable WARNs in SVM where KVM incorrectly assumes the
TSC ratio MSR cannot diverge from the default when TSC scaling is
disabled up related code
- Add a framework to allow "caching" feature flags so that KVM can
check if the guest can use a feature without needing to search
guest CPUID
- Rip out the ancient MMU_DEBUG crud and replace the useful bits with
CONFIG_KVM_PROVE_MMU
- Fix KVM's handling of !visible guest roots to avoid premature
triple fault injection
- Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the
API surface that is needed by external users (currently only
KVMGT), and fix a variety of issues in the process
Generic:
- Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier
events to pass action specific data without needing to constantly
update the main handlers.
- Drop unused function declarations
Selftests:
- Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
- Add support for printf() in guest code and covert all guest asserts
to use printf-based reporting
- Clean up the PMU event filter test and add new testcases
- Include x86 selftests in the KVM x86 MAINTAINERS entry"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (279 commits)
KVM: x86/mmu: Include mmu.h in spte.h
KVM: x86/mmu: Use dummy root, backed by zero page, for !visible guest roots
KVM: x86/mmu: Disallow guest from using !visible slots for page tables
KVM: x86/mmu: Harden TDP MMU iteration against root w/o shadow page
KVM: x86/mmu: Harden new PGD against roots without shadow pages
KVM: x86/mmu: Add helper to convert root hpa to shadow page
drm/i915/gvt: Drop final dependencies on KVM internal details
KVM: x86/mmu: Handle KVM bookkeeping in page-track APIs, not callers
KVM: x86/mmu: Drop @slot param from exported/external page-track APIs
KVM: x86/mmu: Bug the VM if write-tracking is used but not enabled
KVM: x86/mmu: Assert that correct locks are held for page write-tracking
KVM: x86/mmu: Rename page-track APIs to reflect the new reality
KVM: x86/mmu: Drop infrastructure for multiple page-track modes
KVM: x86/mmu: Use page-track notifiers iff there are external users
KVM: x86/mmu: Move KVM-only page-track declarations to internal header
KVM: x86: Remove the unused page-track hook track_flush_slot()
drm/i915/gvt: switch from ->track_flush_slot() to ->track_remove_region()
KVM: x86: Add a new page-track hook to handle memslot deletion
drm/i915/gvt: Don't bother removing write-protection on to-be-deleted slot
KVM: x86: Reject memslot MOVE operations if KVMGT is attached
...
|
||
|
Zheng Yejian
|
f6bd2c9248 |
ring-buffer: Avoid softlockup in ring_buffer_resize()
When user resize all trace ring buffer through file 'buffer_size_kb', then in ring_buffer_resize(), kernel allocates buffer pages for each cpu in a loop. If the kernel preemption model is PREEMPT_NONE and there are many cpus and there are many buffer pages to be allocated, it may not give up cpu for a long time and finally cause a softlockup. To avoid it, call cond_resched() after each cpu buffer allocation. Link: https://lore.kernel.org/linux-trace-kernel/20230906081930.3939106-1-zhengyejian1@huawei.com Cc: <mhiramat@kernel.org> Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Steven Rostedt (Google)
|
e5c624f027 |
tracing: Have event inject files inc the trace array ref count
The event inject files add events for a specific trace array. For an
instance, if the file is opened and the instance is deleted, reading or
writing to the file will cause a use after free.
Up the ref count of the trace_array when a event inject file is opened.
Link: https://lkml.kernel.org/r/20230907024804.292337868@goodmis.org
Link: https://lore.kernel.org/all/1cb3aee2-19af-c472-e265-05176fe9bd84@huawei.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Fixes:
|
||
|
Steven Rostedt (Google)
|
7e2cfbd2d3 |
tracing: Have option files inc the trace array ref count
The option files update the options for a given trace array. For an
instance, if the file is opened and the instance is deleted, reading or
writing to the file will cause a use after free.
Up the ref count of the trace_array when an option file is opened.
Link: https://lkml.kernel.org/r/20230907024804.086679464@goodmis.org
Link: https://lore.kernel.org/all/1cb3aee2-19af-c472-e265-05176fe9bd84@huawei.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Fixes:
|
||
|
Steven Rostedt (Google)
|
9b37febc57 |
tracing: Have current_trace inc the trace array ref count
The current_trace updates the trace array tracer. For an instance, if the
file is opened and the instance is deleted, reading or writing to the file
will cause a use after free.
Up the ref count of the trace array when current_trace is opened.
Link: https://lkml.kernel.org/r/20230907024803.877687227@goodmis.org
Link: https://lore.kernel.org/all/1cb3aee2-19af-c472-e265-05176fe9bd84@huawei.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Fixes:
|
||
|
Steven Rostedt (Google)
|
7d660c9b2b |
tracing: Have tracing_max_latency inc the trace array ref count
The tracing_max_latency file points to the trace_array max_latency field.
For an instance, if the file is opened and the instance is deleted,
reading or writing to the file will cause a use after free.
Up the ref count of the trace_array when tracing_max_latency is opened.
Link: https://lkml.kernel.org/r/20230907024803.666889383@goodmis.org
Link: https://lore.kernel.org/all/1cb3aee2-19af-c472-e265-05176fe9bd84@huawei.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Fixes:
|
||
|
Dave Airlie
|
d9809d242f |
Short summary of fixes pull:
* ivpu: Replace strncpy * nouveau: Fix fence state in nouveau_fence_emit() -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmTxjA0ACgkQaA3BHVML eiMX2gf+ITB9IshJWlD3PINczPljVhkGomDTHv9I3q2/itbvyggBOe7ZK7ANUYP9 pO4IAgl2b6v+hgkCc+Yy0BarJYb4aoPqQfmcuI7DXOHpv7p2kFvEPa4KccPSI8qL RXqHhliFlpk41yUG3YM+FnelshnAQx+j2LNKojCgFGv/5o1iz2p4uUfn1ViA9pfr SAyI/ZLkyOCT6UF/luf5ZMmlbhaCEZBbMnFVvKWCUZbMWx9E9Hkq/fQwrEFBt3ZF zVYggOGoQW7xnVzzgZyUizO8fFIA+EkXd3/cDk5F91T85/frvYw10CNHu2IImvDv frkqjGzwsJ9qKk4tCZ9csyNO6xLRzQ== =sBKG -----END PGP SIGNATURE----- Merge tag 'drm-misc-next-fixes-2023-09-01' of git://anongit.freedesktop.org/drm/drm-misc into drm-next Short summary of fixes pull: * ivpu: Replace strncpy * nouveau: Fix fence state in nouveau_fence_emit() Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230901070123.GA6987@linux-uq9g |
||
|
Steven Rostedt (Google)
|
f5ca233e2e |
tracing: Increase trace array ref count on enable and filter files
When the trace event enable and filter files are opened, increment the
trace array ref counter, otherwise they can be accessed when the trace
array is being deleted. The ref counter keeps the trace array from being
deleted while those files are opened.
Link: https://lkml.kernel.org/r/20230907024803.456187066@goodmis.org
Link: https://lore.kernel.org/all/1cb3aee2-19af-c472-e265-05176fe9bd84@huawei.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes:
|
||
|
Steven Rostedt (Google)
|
9879e5e1c5 |
tracefs/eventfs: Use dput to free the toplevel events directory
Currently when rmdir on an instance is done, eventfs_remove_events_dir()
is called and it does a dput on the dentry and then frees the
eventfs_inode that represents the events directory.
But there's no protection against a reader reading the top level events
directory at the same time and we can get a use after free error. Instead,
use the dput() associated to the dentry to also free the eventfs_inode
associated to the events directory, as that will get called when the last
reference to the directory is released.
This issue triggered the following KASAN report:
==================================================================
BUG: KASAN: slab-use-after-free in eventfs_root_lookup+0x88/0x1b0
Read of size 8 at addr ffff888120130ca0 by task ftracetest/1201
CPU: 4 PID: 1201 Comm: ftracetest Not tainted 6.5.0-test-10737-g469e0a8194e7 #13
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x57/0x90
print_report+0xcf/0x670
? __pfx_ring_buffer_record_off+0x10/0x10
? _raw_spin_lock_irqsave+0x2b/0x70
? __virt_addr_valid+0xd9/0x160
kasan_report+0xd4/0x110
? eventfs_root_lookup+0x88/0x1b0
? eventfs_root_lookup+0x88/0x1b0
eventfs_root_lookup+0x88/0x1b0
? eventfs_root_lookup+0x33/0x1b0
__lookup_slow+0x194/0x2a0
? __pfx___lookup_slow+0x10/0x10
? down_read+0x11c/0x330
walk_component+0x166/0x220
link_path_walk.part.0.constprop.0+0x3a3/0x5a0
? seqcount_lockdep_reader_access+0x82/0x90
? __pfx_link_path_walk.part.0.constprop.0+0x10/0x10
path_openat+0x143/0x11f0
? __lock_acquire+0xa1a/0x3220
? __pfx_path_openat+0x10/0x10
? __pfx___lock_acquire+0x10/0x10
do_filp_open+0x166/0x290
? __pfx_do_filp_open+0x10/0x10
? lock_is_held_type+0xce/0x120
? preempt_count_sub+0xb7/0x100
? _raw_spin_unlock+0x29/0x50
? alloc_fd+0x1a0/0x320
do_sys_openat2+0x126/0x160
? rcu_is_watching+0x34/0x60
? __pfx_do_sys_openat2+0x10/0x10
? __might_resched+0x2cf/0x3b0
? __fget_light+0xdf/0x100
__x64_sys_openat+0xcd/0x140
? __pfx___x64_sys_openat+0x10/0x10
? syscall_enter_from_user_mode+0x22/0x90
? lockdep_hardirqs_on+0x7d/0x100
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
RIP: 0033:0x7f1dceef5e51
Code: 75 57 89 f0 25 00 00 41 00 3d 00 00 41 00 74 49 80 3d 9a 27 0e 00 00 74 6d 89 da 48 89 ee bf 9c ff ff ff b8 01 01 00 00 0f 05 <48> 3d 00 f0 ff ff 0f 87 93 00 00 00 48 8b 54 24 28 64 48 2b 14 25
RSP: 002b:00007fff2cddf380 EFLAGS: 00000202 ORIG_RAX: 0000000000000101
RAX: ffffffffffffffda RBX: 0000000000000241 RCX: 00007f1dceef5e51
RDX: 0000000000000241 RSI: 000055d7520677d0 RDI: 00000000ffffff9c
RBP: 000055d7520677d0 R08: 000000000000001e R09: 0000000000000001
R10: 00000000000001b6 R11: 0000000000000202 R12: 0000000000000000
R13: 0000000000000003 R14: 000055d752035678 R15: 000055d752067788
</TASK>
Allocated by task 1200:
kasan_save_stack+0x2f/0x50
kasan_set_track+0x21/0x30
__kasan_kmalloc+0x8b/0x90
eventfs_create_events_dir+0x54/0x220
create_event_toplevel_files+0x42/0x130
event_trace_add_tracer+0x33/0x180
trace_array_create_dir+0x52/0xf0
trace_array_create+0x361/0x410
instance_mkdir+0x6b/0xb0
tracefs_syscall_mkdir+0x57/0x80
vfs_mkdir+0x275/0x380
do_mkdirat+0x1da/0x210
__x64_sys_mkdir+0x74/0xa0
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Freed by task 1251:
kasan_save_stack+0x2f/0x50
kasan_set_track+0x21/0x30
kasan_save_free_info+0x27/0x40
__kasan_slab_free+0x106/0x180
__kmem_cache_free+0x149/0x2e0
event_trace_del_tracer+0xcb/0x120
__remove_instance+0x16a/0x340
instance_rmdir+0x77/0xa0
tracefs_syscall_rmdir+0x77/0xc0
vfs_rmdir+0xed/0x2d0
do_rmdir+0x235/0x280
__x64_sys_rmdir+0x5f/0x90
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
The buggy address belongs to the object at ffff888120130ca0
which belongs to the cache kmalloc-16 of size 16
The buggy address is located 0 bytes inside of
freed 16-byte region [ffff888120130ca0, ffff888120130cb0)
The buggy address belongs to the physical page:
page:000000004dbddbb0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x120130
flags: 0x17ffffc0000800(slab|node=0|zone=2|lastcpupid=0x1fffff)
page_type: 0xffffffff()
raw: 0017ffffc0000800 ffff8881000423c0 dead000000000122 0000000000000000
raw: 0000000000000000 0000000000800080 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888120130b80: 00 00 fc fc 00 05 fc fc 00 00 fc fc 00 02 fc fc
ffff888120130c00: 00 07 fc fc 00 00 fc fc 00 00 fc fc fa fb fc fc
>ffff888120130c80: 00 00 fc fc fa fb fc fc 00 00 fc fc 00 00 fc fc
^
ffff888120130d00: 00 00 fc fc 00 00 fc fc 00 00 fc fc fa fb fc fc
ffff888120130d80: 00 00 fc fc 00 00 fc fc 00 00 fc fc 00 00 fc fc
==================================================================
Link: https://lkml.kernel.org/r/20230907024803.250873643@goodmis.org
Link: https://lore.kernel.org/all/1cb3aee2-19af-c472-e265-05176fe9bd84@huawei.com/
Cc: Ajay Kaher <akaher@vmware.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes:
|
||
|
Ritesh Harjani (IBM)
|
147d4a092e |
jbd2: Remove page size assumptions
jbd2_alloc() allocates a buffer from slab when the block size is smaller than PAGE_SIZE, and slab may be using a compound page. Before commit |
||
|
Matthew Wilcox (Oracle)
|
f94cf2206b |
buffer: Make bh_offset() work for compound pages
If the buffer pointed to by the buffer_head is part of a compound page,
bh_offset() assumes that b_page is the precise page that contains
the data. A recent change to jbd2 inadvertently violated that assumption.
By using page_size(), we support both b_page being set to the head page
(as page_size() will return the size of the entire folio) and the precise
page (as it will return PAGE_SIZE for a tail page).
Fixes:
|
||
|
Vladimir Oltean
|
1b36955cc0 |
net: enetc: distinguish error from valid pointers in enetc_fixup_clear_rss_rfs()
enetc_psi_create() returns an ERR_PTR() or a valid station interface
pointer, but checking for the non-NULL quality of the return code blurs
that difference away. So if enetc_psi_create() fails, we call
enetc_psi_destroy() when we shouldn't. This will likely result in
crashes, since enetc_psi_create() cleans up everything after itself when
it returns an ERR_PTR().
Fixes:
|
||
|
Jakub Kicinski
|
6afcf0fb92 |
Revert "net: team: do not use dynamic lockdep key"
This reverts commit |
||
|
Linus Torvalds
|
4a0fc73da9 |
more s390 updates for 6.6 merge window
- Couple of virtual vs physical address confusion fixes - Rework locking in dcssblk driver to address a lockdep warning - Remove support for "noexec" kernel command line option since there is no use case where it would make sense - Simplify kernel mapping setup and get rid of quite a bit of code - Add architecture specific __set_memory_yy() functions which allow to modify kernel mappings. Unlike the set_memory_xx() variants they take void pointer start and end parameters, which allows to use them without the usual casts, and also to use them on areas larger than 8TB. Note that the set_memory_xx() family comes with an int num_pages parameter which overflows with 8TB. This could be addressed by changing the num_pages parameter to unsigned long, however requires to change all architectures, since the module code expects an int parameter (see module_set_memory()). This was indeed an issue since for debug_pagealloc() we call set_memory_4k() on the whole identity mapping. Therefore address this for now with the __set_memory_yy() variant, and address common code later - Use dev_set_name() and also fix memory leak in zcrypt driver error handling - Remove unused lsi_mask from airq_struct - Add warning for invalid kernel mapping requests -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEECMNfWEw3SLnmiLkZIg7DeRspbsIFAmT5sYkACgkQIg7DeRsp bsJQHg//SFJOcVr2uViorvmt+IyiW78H75y8+AC6qoxZ3fuJeuyW2zz/resRsFRO UDCjkV2QYT885ADFUMcunf7LQnJYpSFVjAB6WEhgFr+bFdMWtX1crjHsMHkpcobR Fo4IFurG5NOMIdunPwKiO/dLU8pNGTm1T430uyLZH3ApVrmJ8stgOczusqTO/h3V tjbC5HAm9BBwNyOd2lnZSi8pbUMcfGE2DkRYhFQup1N9NT0BC4S6B8vTsD7NVYVZ WbJzqSl3CnTUJxZFX287YDW6cSaPCLAUfCl7r5FJZUoGvUtOVLlqcOjIIm/72epv YygMI8RdM0KHuzOd8XTNDbBnyYWTmWnZypCQVgNezY1GiO5nfTCkwYLZZagcc0Lo 6fx1B7xBbNao9/pURa6wJ9dXsx+NmD52DjM806hP1H+qoL/YP8dLqV6Qh2C1PFzI VncrnG2mnxjwry5WoOyl19SKqXDgmDylnFuHQHKA9mdCaqZWNkqovOo/6qE6OdWI Q3TinPwTug9vmgwBuQgua/2R1owy7G9mJwwDW9AtZXVzlMG6k06deKIYrZjLxf6Z hOtAu+Xy5IeoXOaaOFU92RsRKX481OTG77rWLREC+orAT1dPrfnguPLlQ7KeFbkR foduTTHcDPOLiIVL1RbWQC9AAw/i7IjN04Jp6KFlQTZqLATyPbM= =+iSZ -----END PGP SIGNATURE----- Merge tag 's390-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Heiko Carstens: - A couple of virtual vs physical address confusion fixes - Rework locking in dcssblk driver to address a lockdep warning - Remove support for "noexec" kernel command line option since there is no use case where it would make sense - Simplify kernel mapping setup and get rid of quite a bit of code - Add architecture specific __set_memory_yy() functions which allow us to modify kernel mappings. Unlike the set_memory_xx() variants they take void pointer start and end parameters, which allows using them without the usual casts, and also to use them on areas larger than 8TB. Note that the set_memory_xx() family comes with an int num_pages parameter which overflows with 8TB. This could be addressed by changing the num_pages parameter to unsigned long, however requires to change all architectures, since the module code expects an int parameter (see module_set_memory()). This was indeed an issue since for debug_pagealloc() we call set_memory_4k() on the whole identity mapping. Therefore address this for now with the __set_memory_yy() variant, and address common code later - Use dev_set_name() and also fix memory leak in zcrypt driver error handling - Remove unused lsi_mask from airq_struct - Add warning for invalid kernel mapping requests * tag 's390-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/vmem: do not silently ignore mapping limit s390/zcrypt: utilize dev_set_name() ability to use a formatted string s390/zcrypt: don't leak memory if dev_set_name() fails s390/mm: fix MAX_DMA_ADDRESS physical vs virtual confusion s390/airq: remove lsi_mask from airq_struct s390/mm: use __set_memory() variants where useful s390/set_memory: add __set_memory() variant s390/set_memory: generate all set_memory() functions s390/mm: improve description of mapping permissions of prefix pages s390/amode31: change type of __samode31, __eamode31, etc s390/mm: simplify kernel mapping setup s390: remove "noexec" option s390/vmem: fix virtual vs physical address confusion s390/dcssblk: fix lockdep warning s390/monreader: fix virtual vs physical address confusion |
||
|
Linus Torvalds
|
ac2224a467 |
just cleanups and fixes
-----BEGIN PGP SIGNATURE----- iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAmT42rEaHHRzYm9nZW5k QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHCh6A/9H6hXrmKx1upxzgYiDAwU BiS+eEKWPTUCTyFT5Qs02GiEtDpAVPBoPIaPpcVub9nyvvUEJrUdS7QccRCiZ4se JJBwieKcoLX5v2bGqXsFp5Bjgldm53TS7g/SP5291V8tU5KANnTZuIFibvTnzA1y o3A5yky9FcauJ0hfLpKR2y7bnhD4XZNHRqqkiYylxtMer/+Ymqsu+V92N8aACM/x cPwp72ELyDg+keVMrIOOdQdHti54ZUcfB8lnmmkpm0EOo21pxQrCwVQJpQsnJbVd o1K+qu1DPT2E/PQI6YiroOClyKjnwa8GoVFBr2VAlbDrPWHJlk0iSL66m/KbvrPK EfoPgL59pUUWZ0HQ4iCq9AFrpFg8n7kqfwlKnvyDz39RnRrCA28tYBaNkg+BiUi2 NoDsvLgIC72E420X2PJisU48X2wxITuUt5CBtEcxA5Ry0lWeEZk0fqdYMNDgkYuD /LjEGxW/NyhhM5D8OZIc5beSf0mRwALMQuY90FkfQacJorr1mWQbVLxI6yPrhJpl EizxfOnC440p5A9IaSq6TGnUHhftZpOT70lZw3+SA2IuDN9y1IhaPAYl63RdSIHw 9LuIwFjbghrkXd1189p2li1Wy3DLBv2SbuhoJoNYtCiu8CPBj3Vuzw5mAoqJWje8 rePhw/NWMnI2OCRMVK4JYnc= =db73 -----END PGP SIGNATURE----- Merge tag 'mips_6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: "Just cleanups and fixes" * tag 'mips_6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: TXx9: Do PCI error checks on own line arch/mips/configs/*_defconfig cleanup MIPS: VDSO: Conditionally export __vdso_gettimeofday() Mips: loongson3_defconfig: Enable ast drm driver by default mips: remove <asm/export.h> mips: replace #include <asm/export.h> with #include <linux/export.h> mips: remove unneeded #include <asm/export.h> MIPS: Loongson64: Fix more __iomem attributes MIPS: loongson32: Remove regs-rtc.h MIPS: loongson32: Remove regs-clk.h MIPS: More explicit DT include clean-ups MIPS: Fixup explicit DT include clean-up Revert MIPS: Loongson: Fix build error when make modules_install MIPS: Only fiddle with CHECKFLAGS if `need-compiler' MIPS: Fix CONFIG_CPU_DADDI_WORKAROUNDS `modules_install' regression MIPS: Explicitly include correct DT includes |
||
|
Linus Torvalds
|
dd1386dd3c |
Xtensa updates for v6.6
- enable MTD XIP support - fix base address of the xtensa perf module in newer hardware -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEK2eFS5jlMn3N6xfYUfnMkfg/oEQFAmT3iNQTHGpjbXZia2Jj QGdtYWlsLmNvbQAKCRBR+cyR+D+gROrfD/4zCnLRQ36L6QY2+F7xZWZiPAIbZO01 0fFKUm2C+crWNGO5ccYmBRo0DYq9qHzS1P3r/617NmcuA+MN2+2avr9u6oq3j4O5 MR3xnnj3wMo9BS4VlFxf3JimI6S+DAFrYqF+smwES+9yqX3tlg23qOTyxINvAPIX D7Cs/8PlQ7mV/d42wspQvnPucBlgW9T3UxoT1nbxIUcTBYE6TLMchkVsRigQHHS0 Mr+T1kEmGKNSSz7F8oLNYtwqKoVf+WyjMePSkFJTu8Uki7xAHPfZ/5iZGDqGRKS9 yTgbmSp/bYfOmO7DnM3Dxx7mrYV8v7HOK5OPN1X0W/r5S8EC7dcCVTAyalds5Zhp edpdiQ9izP0gTHZTsXuBWh6sTIOSiSSDveuSyeT06YsPtZNanG0il41jZJAy5GVo 2fA88tE/GVBTiMQe5AfC4b3AIRCGKca6DMuJHdPgwfB0JBpItE7V4rdD+r9qPHym O5GVBgWhYCtXHT/qe2tbFAXY7y98uFLQBNltuEV/Ky3l47vw7qCP6aI+csSAVNp1 oUNqQo8YAgI+i5gMUpqCZZivrH0iQDQX1pGS06Vftj1wkFppyVRrPHBiseG3vNng SnpNwHZiornub239hPy52kr/EgOG5TV89htx1Iu6Y+s2UaR1e/HfIcsow0SjqysS tAj8M397lzlHtA== =GV6O -----END PGP SIGNATURE----- Merge tag 'xtensa-20230905' of https://github.com/jcmvbkbc/linux-xtensa Pull xtensa updates from Max Filippov: - enable MTD XIP support - fix base address of the xtensa perf module in newer hardware * tag 'xtensa-20230905' of https://github.com/jcmvbkbc/linux-xtensa: xtensa: add XIP-aware MTD support xtensa: PMU: fix base address for the newer hardware |
||
|
Christian Brauner
|
78a06688a4 |
ntfs3: drop inode references in ntfs_put_super()
Recently we moved most cleanup from ntfs_put_super() into
ntfs3_kill_sb() as part of a bigger cleanup. This accidently also moved
dropping inode references stashed in ntfs3's sb->s_fs_info from
@sb->put_super() to @sb->kill_sb(). But generic_shutdown_super()
verifies that there are no busy inodes past sb->put_super(). Fix this
and disentangle dropping inode references from freeing @sb->s_fs_info.
Fixes:
|
||
|
Linus Torvalds
|
9013c51c63 |
vfs: mostly undo glibc turning 'fstat()' into 'fstatat(AT_EMPTY_PATH)'
Mateusz reports that glibc turns 'fstat()' calls into 'fstatat()', and that seems to have been going on for quite a long time due to glibc having tried to simplify its stat logic into just one point. This turns out to cause completely unnecessary overhead, where we then go off and allocate the kernel side pathname, and actually look up the empty path. Sure, our path lookup is quite optimized, but it still causes a fair bit of allocation overhead and a couple of completely unnecessary rounds of lockref accesses etc. This is all hopefully getting fixed in user space, and there is a patch floating around for just having glibc use the native fstat() system call. But even with the current situation we can at least improve on things by catching the situation and short-circuiting it. Note that this is still measurably slower than just a plain 'fstat()', since just checking that the filename is actually empty is somewhat expensive due to inevitable user space access overhead from the kernel (ie verifying pointers, and SMAP on x86). But it's still quite a bit faster than actually looking up the path for real. To quote numers from Mateusz: "Sapphire Rapids, will-it-scale, ops/s stock fstat 5088199 patched fstat 7625244 (+49%) real fstat 8540383 (+67% / +12%)" where that 'stock fstat' is the glibc translation of fstat into fstatat() with an empty path, the 'patched fstat' is with this short circuiting of the path lookup, and the 'real fstat' is the actual native fstat() system call with none of this overhead. Link: https://lore.kernel.org/lkml/20230903204858.lv7i3kqvw6eamhgz@f/ Reported-by: Mateusz Guzik <mjguzik@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Alex Deucher
|
dcbad72751 |
drm/radeon: make fence wait in suballocator uninterrruptable
Commit |