Commit graph

175 commits

Author SHA1 Message Date
Nick Piggin
af5a30d8cf fix truncate inode time modification breakage
mtime and ctime should be changed only if the file size has actually
changed. Patches changing ext2 and tmpfs from vmtruncate to new truncate
sequence has caused regressions where they always update timestamps.

There is some strange cases in POSIX where truncate(2) must not update
times unless the size has acutally changed, see 6e656be89.

This area is all still rather buggy in different ways in a lot of
filesystems and needs a cleanup and audit (ideally the vfs will provide
a simple attribute or call to direct all filesystems exactly which
attributes to change). But coming up with the best solution will take a
while and is not appropriate for rc anyway.

So fix recent regression for now.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-06-04 17:16:30 -04:00
npiggin@suse.de
3889e6e76f tmpfs: convert to use the new truncate convention
Cc: Christoph Hellwig <hch@lst.de>
Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-27 22:15:51 -04:00
Christoph Hellwig
1b061d9247 rename the generic fsync implementations
We don't name our generic fsync implementations very well currently.
The no-op implementation for in-memory filesystems currently is called
simple_sync_file which doesn't make too much sense to start with,
the the generic one for simple filesystems is called simple_fsync
which can lead to some confusion.

This patch renames the generic file fsync method to generic_file_fsync
to match the other generic_file_* routines it is supposed to be used
with, and the no-op implementation to noop_fsync to make it obvious
what to expect.  In addition add some documentation for both methods.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-27 22:06:06 -04:00
Daisuke Nishimura
87946a7228 memcg: move charge of file pages
This patch adds support for moving charge of file pages, which include
normal file, tmpfs file and swaps of tmpfs file.  It's enabled by setting
bit 1 of <target cgroup>/memory.move_charge_at_immigrate.

Unlike the case of anonymous pages, file pages(and swaps) in the range
mmapped by the task will be moved even if the task hasn't done page fault,
i.e.  they might not be the task's "RSS", but other task's "RSS" that maps
the same file.  And mapcount of the page is ignored(the page can be moved
even if page_mapcount(page) > 1).  So, conditions that the page/swap
should be met to be moved is that it must be in the range mmapped by the
target task and it must be charged to the old cgroup.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix warning]
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:43 -07:00
Huang Shijie
4b50dc26a0 shmem: remove redundant code
prep_new_page() will call set_page_private(page, 0) to initialise the
page, so the code is redundant.

Signed-off-by: Huang Shijie <shijie8@gmail.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 08:06:57 -07:00
Dmitry Monakhov
454abafe9d ramfs: replace inode uid,gid,mode initialization with helper function
- seems what ramfs_get_inode is only locally, make it static.
[AV: the hell it is; it's used by shmem, so shmem needed conversion too
and no, that function can't be made static]

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-21 18:31:26 -04:00
Stephen Hemminger
bb4354538e fs: xattr_handler table should be const
The entries in xattr handler table should be immutable (ie const)
like other operation tables.

Later patches convert common filesystems. Uncoverted filesystems
will still work, but will generate a compiler warning.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-21 18:31:18 -04:00
Al Viro
718deb6b61 Fix breakage in shmem.c
Replacing
	error = 0;
	if (error)
		op
with nothing is not quite an equivalent transformation ;-)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-16 19:48:48 -05:00
Christoph Hellwig
1c7c474c31 make generic_acl slightly more generic
Now that we cache the ACL pointers in the generic inode all the generic_acl
cruft can go away and generic_acl.c can directly implement xattr handlers
dealing with the full Posix ACL semantics for in-memory filesystems.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-16 12:16:49 -05:00
Christoph Hellwig
431547b3c4 sanitize xattr handler prototypes
Add a flags argument to struct xattr_handler and pass it to all xattr
handler methods.  This allows using the same methods for multiple
handlers, e.g. for the ACL methods which perform exactly the same action
for the access and default ACLs, just using a different underlying
attribute.  With a little more groundwork it'll also allow sharing the
methods for the regular user/trusted/secure handlers in extN, ocfs2 and
jffs2 like it's already done for xfs in this patch.

Also change the inode argument to the handlers to a dentry to allow
using the handlers mechnism for filesystems that require it later,
e.g. cifs.

[with GFS2 bits updated by Steven Whitehouse <swhiteho@redhat.com>]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-16 12:16:49 -05:00
Al Viro
0552f879d4 Untangling ima mess, part 1: alloc_file()
There are 2 groups of alloc_file() callers:
	* ones that are followed by ima_counts_get
	* ones giving non-regular files
So let's pull that ima_counts_get() into alloc_file();
it's a no-op in case of non-regular files.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-16 12:16:47 -05:00
Al Viro
2c48b9c455 switch alloc_file() to passing struct path
... and have the caller grab both mnt and dentry; kill
leak in infiniband, while we are at it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-16 12:16:42 -05:00
Al Viro
4b42af81f0 switch shmem_file_setup() to alloc_file()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-16 12:16:40 -05:00
Hugh Dickins
aaa468653b swap_info: note SWAP_MAP_SHMEM
While we're fiddling with the swap_map values, let's assign a particular
value to shmem/tmpfs swap pages: their swap counts are never incremented,
and it helps swapoff's try_to_unuse() a little if it can immediately
distinguish those pages from process pages.

Since we've no use for SWAP_MAP_BAD | COUNT_CONTINUED,
we might as well use that 0xbf value for SWAP_MAP_SHMEM.

Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:16 -08:00
Alexey Dobriyan
f0f37e2f77 const: mark struct vm_struct_operations
* mark struct vm_area_struct::vm_ops as const
* mark vm_ops in AGP code

But leave TTM code alone, something is fishy there with global vm_ops
being used.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-27 11:39:25 -07:00
Linus Torvalds
6d7f18f6ea Merge branch 'writeback' of git://git.kernel.dk/linux-2.6-block
* 'writeback' of git://git.kernel.dk/linux-2.6-block:
  writeback: writeback_inodes_sb() should use bdi_start_writeback()
  writeback: don't delay inodes redirtied by a fast dirtier
  writeback: make the super_block pinning more efficient
  writeback: don't resort for a single super_block in move_expired_inodes()
  writeback: move inodes from one super_block together
  writeback: get rid to incorrect references to pdflush in comments
  writeback: improve readability of the wb_writeback() continue/break logic
  writeback: cleanup writeback_single_inode()
  writeback: kupdate writeback shall not stop when more io is possible
  writeback: stop background writeback when below background threshold
  writeback: balance_dirty_pages() shall write more than dirtied pages
  fs: Fix busyloop in wb_writeback()
2009-09-25 09:27:30 -07:00
Jens Axboe
5b0830cb90 writeback: get rid to incorrect references to pdflush in comments
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-25 18:08:25 +02:00
Linus Torvalds
db16826367 Merge branch 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6
* 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6: (21 commits)
  HWPOISON: Enable error_remove_page on btrfs
  HWPOISON: Add simple debugfs interface to inject hwpoison on arbitary PFNs
  HWPOISON: Add madvise() based injector for hardware poisoned pages v4
  HWPOISON: Enable error_remove_page for NFS
  HWPOISON: Enable .remove_error_page for migration aware file systems
  HWPOISON: The high level memory error handler in the VM v7
  HWPOISON: Add PR_MCE_KILL prctl to control early kill behaviour per process
  HWPOISON: shmem: call set_page_dirty() with locked page
  HWPOISON: Define a new error_remove_page address space op for async truncation
  HWPOISON: Add invalidate_inode_page
  HWPOISON: Refactor truncate to allow direct truncating of page v2
  HWPOISON: check and isolate corrupted free pages v2
  HWPOISON: Handle hardware poisoned pages in try_to_unmap
  HWPOISON: Use bitmask/action code for try_to_unmap behaviour
  HWPOISON: x86: Add VM_FAULT_HWPOISON handling to x86 page fault handler v2
  HWPOISON: Add poison check to page fault handling
  HWPOISON: Add basic support for poisoned pages in fault handler v3
  HWPOISON: Add new SIGBUS error codes for hardware poison signals
  HWPOISON: Add support for poison swap entries v2
  HWPOISON: Export some rmap vma locking to outside world
  ...
2009-09-24 07:53:22 -07:00
Pekka Enberg
425fbf047c shmem: initialize struct shmem_sb_info to zero
Fixes the following kmemcheck false positive (the compiler is using
a 32-bit mov to load the 16-bit sbinfo->mode in shmem_fill_super):

[    0.337000] Total of 1 processors activated (3088.38 BogoMIPS).
[    0.352000] CPU0 attaching NULL sched-domain.
[    0.360000] WARNING: kmemcheck: Caught 32-bit read from uninitialized
memory (9f8020fc)
[    0.361000]
a44240820000000041f6998100000000000000000000000000000000ff030000
[    0.368000]  i i i i i i i i i i i i i i i i u u u u i i i i i i i i i i u
u
[    0.375000]                                                          ^
[    0.376000]
[    0.377000] Pid: 9, comm: khelper Not tainted (2.6.31-tip #206) P4DC6
[    0.378000] EIP: 0060:[<810a3a95>] EFLAGS: 00010246 CPU: 0
[    0.379000] EIP is at shmem_fill_super+0xb5/0x120
[    0.380000] EAX: 00000000 EBX: 9f845400 ECX: 824042a4 EDX: 8199f641
[    0.381000] ESI: 9f8020c0 EDI: 9f845400 EBP: 9f81af68 ESP: 81cd6eec
[    0.382000]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[    0.383000] CR0: 8005003b CR2: 9f806200 CR3: 01ccd000 CR4: 000006d0
[    0.384000] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[    0.385000] DR6: ffff4ff0 DR7: 00000400
[    0.386000]  [<810c25fc>] get_sb_nodev+0x3c/0x80
[    0.388000]  [<810a3514>] shmem_get_sb+0x14/0x20
[    0.390000]  [<810c207f>] vfs_kern_mount+0x4f/0x120
[    0.392000]  [<81b2849e>] init_tmpfs+0x7e/0xb0
[    0.394000]  [<81b11597>] do_basic_setup+0x17/0x30
[    0.396000]  [<81b11907>] kernel_init+0x57/0xa0
[    0.398000]  [<810039b7>] kernel_thread_helper+0x7/0x10
[    0.400000]  [<ffffffff>] 0xffffffff
[    0.402000] khelper used greatest stack depth: 2820 bytes left
[    0.407000] calling  init_mmap_min_addr+0x0/0x10 @ 1
[    0.408000] initcall init_mmap_min_addr+0x0/0x10 returned 0 after 0 usecs

Reported-by: Ingo Molnar <mingo@elte.hu>
Analysed-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:42 -07:00
Hugh Dickins
3f96b79ad9 tmpfs: depend on shmem
CONFIG_SHMEM off gives you (ramfs masquerading as) tmpfs, even when
CONFIG_TMPFS is off: that's a little anomalous, and I'd intended to make
more sense of it by removing CONFIG_TMPFS altogether, always enabling its
code when CONFIG_SHMEM; but so many defconfigs have CONFIG_SHMEM on
CONFIG_TMPFS off that we'd better leave that as is.

But there is no point in asking for CONFIG_TMPFS if CONFIG_SHMEM is off:
make TMPFS depend on SHMEM, which also prevents TMPFS_POSIX_ACL
shmem_acl.o being pointlessly built into the kernel when SHMEM is off.

And a selfish change, to prevent the world from being rebuilt when I
switch between CONFIG_SHMEM on and off: the only CONFIG_SHMEM in the
header files is mm.h shmem_lock() - give that a shmem.c stub instead.

Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:41 -07:00
Jaswinder Singh Rajput
cff397e6b3 mm: includecheck fix for mm/shmem.c
Fix the following 'make includecheck' warning:

  mm/shmem.c: linux/vfs.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:35 -07:00
Daisuke Nishimura
2ca4532a49 mm: add_to_swap_cache() does not return -EEXIST
After commit 355cfa73 ("mm: modify swap_map and add SWAP_HAS_CACHE flag"),
only the context which have set SWAP_HAS_CACHE flag by swapcache_prepare()
or get_swap_page() would call add_to_swap_cache().  So add_to_swap_cache()
doesn't return -EEXIST any more.

Even though it doesn't return -EEXIST, it's not good behavior conceptually
to call swapcache_prepare() in the -EEXIST case, because it means clearing
SWAP_HAS_CACHE flag while the entry is on swap cache.

This patch removes redundant codes and comments from callers of it, and
adds VM_BUG_ON() in error path of add_to_swap_cache() and some comments.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:35 -07:00
Andi Kleen
aa261f549d HWPOISON: Enable .remove_error_page for migration aware file systems
Enable removing of corrupted pages through truncation
for a bunch of file systems: ext*, xfs, gfs2, ocfs2, ntfs
These should cover most server needs.

I chose the set of migration aware file systems for this
for now, assuming they have been especially audited.
But in general it should be safe for all file systems
on the data area that support read/write and truncate.

Caveat: the hardware error handler does not take i_mutex
for now before calling the truncate function. Is that ok?

Cc: tytso@mit.edu
Cc: hch@infradead.org
Cc: mfasheh@suse.com
Cc: aia21@cantab.net
Cc: hugh.dickins@tiscali.co.uk
Cc: swhiteho@redhat.com
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2009-09-16 11:50:16 +02:00
Wu Fengguang
6746aff74d HWPOISON: shmem: call set_page_dirty() with locked page
The dirtying of page and set_page_dirty() can be moved into the page lock.

- In shmem_write_end(), the page was dirtied while the page lock was held,
  but it's being marked dirty just after dropping the page lock.
- In shmem_symlink(), both dirtying and marking can be moved into page lock.

It's valuable for the hwpoison code to know whether one bad page can be dropped
without losing data. It mainly judges by testing the PG_dirty bit after taking
the page lock. So it becomes important that the dirtying of page and the
marking of dirtiness are both done inside the page lock. Which is a common
practice, but sadly not a rule.

The noticeable exceptions are
- mapped pages
- pages with buffer_heads
The above pages could go dirty at any time. Fortunately the hwpoison will
unmap the page and release the buffer_heads beforehand anyway.

Many other types of pages (eg. metadata pages) can also be dirtied at will by
their owners, the hwpoison code cannot do meaningful things to them anyway.
Only the dirtiness of pagecache pages owned by regular files are interested.

v2: AK: Add comment about set_page_dirty rules (suggested by Peter Zijlstra)

Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2009-09-16 11:50:14 +02:00
Kay Sievers
2b2af54a5b Driver Core: devtmpfs - kernel-maintained tmpfs-based /dev
Devtmpfs lets the kernel create a tmpfs instance called devtmpfs
very early at kernel initialization, before any driver-core device
is registered. Every device with a major/minor will provide a
device node in devtmpfs.

Devtmpfs can be changed and altered by userspace at any time,
and in any way needed - just like today's udev-mounted tmpfs.
Unmodified udev versions will run just fine on top of it, and will
recognize an already existing kernel-created device node and use it.
The default node permissions are root:root 0600. Proper permissions
and user/group ownership, meaningful symlinks, all other policy still
needs to be applied by userspace.

If a node is created by devtmps, devtmpfs will remove the device node
when the device goes away. If the device node was created by
userspace, or the devtmpfs created node was replaced by userspace, it
will no longer be removed by devtmpfs.

If it is requested to auto-mount it, it makes init=/bin/sh work
without any further userspace support. /dev will be fully populated
and dynamic, and always reflect the current device state of the kernel.
With the commonly used dynamic device numbers, it solves the problem
where static devices nodes may point to the wrong devices.

It is intended to make the initial bootup logic simpler and more robust,
by de-coupling the creation of the inital environment, to reliably run
userspace processes, from a complex userspace bootstrap logic to provide
a working /dev.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jan Blunck <jblunck@suse.de>
Tested-By: Harald Hoyer <harald@redhat.com>
Tested-By: Scott James Remnant <scott@ubuntu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15 09:50:49 -07:00
Linus Torvalds
6d848a488a shmfs: use 'check_acl' instead of 'permission'
shmfs wants purely standard POSIX ACL semantics, so we can use the new
generic VFS layer POSIX ACL checking rather than cooking our own
'permission()' function.

Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-08 11:08:46 -07:00
Al Viro
72c04902d1 Get "no acls for this inode" right, fix shmem breakage
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-24 16:58:48 -04:00
Al Viro
06b16e9f68 switch shmem to inode->i_acl
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-24 08:17:06 -04:00
Sergei Trofimovich
168f5ac668 mm cleanup: shmem_file_setup: 'char *' -> 'const char *' for name argument
As function shmem_file_setup does not modify/allocate/free/pass given
filename - mark it as const.

Signed-off-by: Sergei Trofimovich <slyfox@inbox.ru>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:44 -07:00
KAMEZAWA Hiroyuki
cb4b86ba47 mm: add swap cache interface for swap reference
In a following patch, the usage of swap cache is recorded into swap_map.
This patch is for necessary interface changes to do that.

2 interfaces:

  - swapcache_prepare()
  - swapcache_free()

are added for allocating/freeing refcnt from swap-cache to existing swap
entries.  But implementation itself is not changed under this patch.  At
adding swapcache_free(), memcg's hook code is moved under
swapcache_free().  This is better than using scattered hooks.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: Balbir Singh <balbir@in.ibm.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:42 -07:00
Mimi Zohar
c9d9ac525a integrity: move ima_counts_get
Based on discussion on lkml (Andrew Morton and Eric Paris),
move ima_counts_get down a layer into shmem/hugetlb__file_setup().
Resolves drm shmem_file_setup() usage case as well.

HD comment:
  I still think you're doing this at the wrong level, but recognize
  that you probably won't be persuaded until a few more users of
  alloc_file() emerge, all wanting your ima_counts_get().

  Resolving GEM's shmem_file_setup() is an improvement, so I'll say

Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-05-22 09:45:33 +10:00
Mimi Zohar
b9fc745db8 integrity: path_check update
- Add support in ima_path_check() for integrity checking without
incrementing the counts. (Required for nfsd.)
- rename and export opencount_get to ima_counts_get
- replace ima_shm_check calls with ima_counts_get
- export ima_path_check

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-05-22 09:43:41 +10:00
Daisuke Nishimura
ae3abae64f memcg: fix mem_cgroup_shrink_usage()
Current mem_cgroup_shrink_usage() has two problems.

1. It doesn't call mem_cgroup_out_of_memory and doesn't update
   last_oom_jiffies, so pagefault_out_of_memory invokes global OOM.

2. Considering hierarchy, shrinking has to be done from the
   mem_over_limit, not from the memcg which the page would be charged to.

mem_cgroup_try_charge_swapin() does all of these things properly, so we
use it and call cancel_charge_swapin when it succeeded.

The name of "shrink_usage" is not appropriate for this behavior, so we
change it too.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.cn>
Cc: Paul Menage <menage@google.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-02 15:36:09 -07:00
Hugh Dickins
caefba1740 shmem: respect MAX_LFS_FILESIZE
SHMEM_MAX_BYTES was derived from the maximum size of its triple-indirect
swap vector, forgetting to take the MAX_LFS_FILESIZE limit into account.
Never mind 256kB pages, even 8kB pages on 32-bit kernels allowed files to
grow slightly bigger than that supposed maximum.

Fix this by using the min of both (at build time not run time).  And it
happens that this calculation is good as far as 8MB pages on 32-bit or
16MB pages on 64-bit: though SHMSWP_MAX_INDEX gets truncated before that,
it's truncated to such large numbers that we don't need to care.

[akpm@linux-foundation.org: it needs pagemap.h]
[akpm@linux-foundation.org: fix sparc64 min() warnings]
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Yuri Tikhonov <yur@emcraft.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-13 15:04:33 -07:00
Yuri Tikhonov
61609d01cb shmem: fix division by zero
Fix a division by zero which we have in shmem_truncate_range() and
shmem_unuse_inode() when using big PAGE_SIZE values (e.g.  256kB on
ppc44x).

With 256kB PAGE_SIZE, the ENTRIES_PER_PAGEPAGE constant becomes too large
(0x1.0000.0000) on a 32-bit kernel, so this patch just changes its type
from 'unsigned long' to 'unsigned long long'.

Hugh: reverted its unsigned long longs in shmem_truncate_range() and
shmem_getpage(): the pagecache index cannot be more than an unsigned long,
so the divisions by zero occurred in unreached code.  It's a pity we need
any ULL arithmetic here, but I found no pretty way to avoid it.

Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-13 15:04:32 -07:00
Hugh Dickins
9fab5619bd shmem: writepage directly to swap
Synopsis: if shmem_writepage calls swap_writepage directly, most shmem
swap loads benefit, and a catastrophic interaction between SLUB and some
flash storage is avoided.

shmem_writepage() has always been peculiar in making no attempt to write:
it has just transferred a shmem page from file cache to swap cache, then
let that page make its way around the LRU again before being written and
freed.

The idea was that people use tmpfs because they want those pages to stay
in RAM; so although we give it an overflow to swap, we should resist
writing too soon, giving those pages a second chance before they can be
reclaimed.

That was always questionable, and I've toyed with this patch for years;
but never had a clear justification to depart from the original design.

It became more questionable in 2.6.28, when the split LRU patches classed
shmem and tmpfs pages as SwapBacked rather than as file_cache: that in
itself gives them more resistance to reclaim than normal file pages.  I
prepared this patch for 2.6.29, but the merge window arrived before I'd
completed gathering statistics to justify sending it in.

Then while comparing SLQB against SLUB, running SLUB on a laptop I'd
habitually used with SLAB, I found SLUB to run my tmpfs kbuild swapping
tests five times slower than SLAB or SLQB - other machines slower too, but
nowhere near so bad.  Simpler "cp -a" swapping tests showed the same.

slub_max_order=0 brings sanity to all, but heavy swapping is too far from
normal to justify such a tuning.  The crucial factor on that laptop turns
out to be that I'm using an SD card for swap.  What happens is this:

By default, SLUB uses order-2 pages for shmem_inode_cache (and many other
fs inodes), so creating tmpfs files under memory pressure brings lumpy
reclaim into play.  One subpage of the order is chosen from the bottom of
the LRU as usual, then the other three picked out from their random
positions on the LRUs.

In a tmpfs load, many of these pages will be ones which already passed
through shmem_writepage, so already have swap allocated.  And though their
offsets on swap were probably allocated sequentially, now that the pages
are picked off at random, their swap offsets are scattered.

But the flash storage on the SD card is very sensitive to having its
writes merged: once swap is written at scattered offsets, performance
falls apart.  Rotating disk seeks increase too, but less disastrously.

So: stop giving shmem/tmpfs pages a second pass around the LRU, write them
out to swap as soon as their swap has been allocated.

It's surely possible to devise an artificial load which runs faster the
old way, one whose sizing is such that the tmpfs pages on their second
pass are the ones that are wanted again, and other pages not.

But I've not yet found such a load: on all machines, under the loads I've
tried, immediate swap_writepage speeds up shmem swapping: especially when
using the SLUB allocator (and more effectively than slub_max_order=0), but
also with the others; and it also reduces the variance between runs.  How
much faster varies widely: a factor of five is rare, 5% is common.

One load which might have suffered: imagine a swapping shmem load in a
limited mem_cgroup on a machine with plenty of memory.  Before 2.6.29 the
swapcache was not charged, and such a load would have run quickest with
the shmem swapcache never written to swap.  But now swapcache is charged,
so even this load benefits from shmem_writepage directly to swap.

Apologies for the #ifndef CONFIG_SWAP swap_writepage() stub in swap.h:
it's silly because that will never get called; but refactoring shmem.c
sensibly according to CONFIG_SWAP will be a separate task.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:15 -07:00
James Morris
703a3cd728 Merge branch 'master' into next 2009-03-24 10:52:46 +11:00
Hugh Dickins
0b0a0806b0 shmem: fix shared anonymous accounting
Each time I exit Firefox, /proc/meminfo's Committed_AS goes down almost
400 kB: OVERCOMMIT_NEVER would be allowing overcommits it should
prohibit.

Commit fc8744adc8 "Stop playing silly
games with the VM_ACCOUNT flag" changed shmem_file_setup() to set the
shmem file's VM_ACCOUNT flag according to VM_NORESERVE not being set in
the vma flags; but did so only _after_ the shmem_acct_size(flags, size)
call which is expected to pre-account a shared anonymous object.

It's all clearer if we switch shmem.c over to use VM_NORESERVE
throughout in place of !VM_ACCOUNT.

But I very nearly sent in a patch which mistakenly removed the
accounting from tmpfs files: shmem_get_inode()'s memset was good for not
setting VM_ACCOUNT, but now it needs to set VM_NORESERVE.

Rather than setting that by default, then perhaps clearing it again in
shmem_file_setup(), let's pass it as a flag to shmem_get_inode(): that
allows us to remove the #ifdef CONFIG_SHMEM from shmem_file_setup().

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-25 12:21:42 -08:00
Mimi Zohar
ed850a52af integrity: shmem zero fix
Based on comments from Mike Frysinger and Randy Dunlap:
(http://lkml.org/lkml/2009/2/9/262)
- moved ima.h include before CONFIG_SHMEM test to fix compiler error
  on Blackfin:
mm/shmem.c: In function 'shmem_zero_setup':
mm/shmem.c:2670: error: implicit declaration of function 'ima_shm_check'

- added 'struct linux_binprm' in ima.h to fix compiler warning on Blackfin:
In file included from mm/shmem.c:32:
include/linux/ima.h:25: warning: 'struct linux_binprm' declared inside
parameter list
include/linux/ima.h:25: warning: its scope is only this definition or
declaration, which is probably not what you want

- moved fs.h include within _LINUX_IMA_H definition

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: James Morris <jmorris@namei.org>
2009-02-11 15:27:15 +11:00
James Morris
cb5629b10d Merge branch 'master' into next
Conflicts:
	fs/namei.c

Manually merged per:

diff --cc fs/namei.c
index 734f2b5,bbc15c2..0000000
--- a/fs/namei.c
+++ b/fs/namei.c
@@@ -860,9 -848,8 +849,10 @@@ static int __link_path_walk(const char
  		nd->flags |= LOOKUP_CONTINUE;
  		err = exec_permission_lite(inode);
  		if (err == -EAGAIN)
- 			err = vfs_permission(nd, MAY_EXEC);
+ 			err = inode_permission(nd->path.dentry->d_inode,
+ 					       MAY_EXEC);
 +		if (!err)
 +			err = ima_path_check(&nd->path, MAY_EXEC);
   		if (err)
  			break;

@@@ -1525,14 -1506,9 +1509,14 @@@ int may_open(struct path *path, int acc
  		flag &= ~O_TRUNC;
  	}

- 	error = vfs_permission(nd, acc_mode);
+ 	error = inode_permission(inode, acc_mode);
  	if (error)
  		return error;
 +
- 	error = ima_path_check(&nd->path,
++	error = ima_path_check(path,
 +			       acc_mode & (MAY_READ | MAY_WRITE | MAY_EXEC));
 +	if (error)
 +		return error;
  	/*
  	 * An append-only file must be opened in append mode for writing.
  	 */

Signed-off-by: James Morris <jmorris@namei.org>
2009-02-06 11:01:45 +11:00
Mimi Zohar
1df9f0a731 Integrity: IMA file free imbalance
The number of calls to ima_path_check()/ima_file_free()
should be balanced.  An extra call to fput(), indicates
the file could have been accessed without first being
measured.

Although f_count is incremented/decremented in places other
than fget/fput, like fget_light/fput_light and get_file, the
current task must already hold a file refcnt.  The call to
__fput() is delayed until the refcnt becomes 0, resulting
in ima_file_free() flagging any changes.

- add hook to increment opencount for IPC shared memory(SYSV),
  shmat files, and /dev/zero
- moved NULL iint test in opencount_get()

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-02-06 09:05:33 +11:00
Linus Torvalds
fc8744adc8 Stop playing silly games with the VM_ACCOUNT flag
The mmap_region() code would temporarily set the VM_ACCOUNT flag for
anonymous shared mappings just to inform shmem_zero_setup() that it
should enable accounting for the resulting shm object.  It would then
clear the flag after calling ->mmap (for the /dev/zero case) or doing
shmem_zero_setup() (for the MAP_ANON case).

This just resulted in vma merge issues, but also made for just
unnecessary confusion.  Use the already-existing VM_NORESERVE flag for
this instead, and let shmem_{zero|file}_setup() just figure it out from
that.

This also happens to make it obvious that the new DRI2 GEM layer uses a
non-reserving backing store for its object allocation - which is quite
possibly not intentional.  But since I didn't want to change semantics
in this patch, I left it alone, and just updated the caller to use the
new flag semantics.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-31 15:08:56 -08:00
KAMEZAWA Hiroyuki
b5a84319a4 memcg: fix shmem's swap accounting
Now, you can see following even when swap accounting is enabled.

 1. Create Group 01, and 02.
 2. allocate a "file" on tmpfs by a task under 01.
 3. swap out the "file" (by memory pressure)
 4. Read "file" from a task in group 02.
 5. the charge of "file" is moved to group 02.

This is not ideal behavior. This is because SwapCache which was loaded
by read-ahead is not taken into account..

This is a patch to fix shmem's swapcache behavior.
  - remove mem_cgroup_cache_charge_swapin().
  - Add SwapCache handler routine to mem_cgroup_cache_charge().
    By this, shmem's file cache is charged at add_to_page_cache()
    with GFP_NOWAIT.
  - pass the page of swapcache to shrink_mem_cgroup.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 08:31:10 -08:00
KAMEZAWA Hiroyuki
2c26fdd70c memcg: revert gfp mask fix
My patch, memcg-fix-gfp_mask-of-callers-of-charge.patch changed gfp_mask
of callers of charge to be GFP_HIGHUSER_MOVABLE for showing what will
happen at memory reclaim.

But in recent discussion, it's NACKed because it sounds ugly.

This patch is for reverting it and add some clean up to gfp_mask of
callers of charge.  No behavior change but need review before generating
HUNK in deep queue.

This patch also adds explanation to meaning of gfp_mask passed to charge
functions in memcontrol.h.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 08:31:06 -08:00
KAMEZAWA Hiroyuki
d13d144309 memcg: handle swap caches
SwapCache support for memory resource controller (memcg)

Before mem+swap controller, memcg itself should handle SwapCache in proper
way.  This is cut-out from it.

In current memcg, SwapCache is just leaked and the user can create tons of
SwapCache.  This is a leak of account and should be handled.

SwapCache accounting is done as following.

  charge (anon)
	- charged when it's mapped.
	  (because of readahead, charge at add_to_swap_cache() is not sane)
  uncharge (anon)
	- uncharged when it's dropped from swapcache and fully unmapped.
	  means it's not uncharged at unmap.
	  Note: delete from swap cache at swap-in is done after rmap information
	        is established.
  charge (shmem)
	- charged at swap-in. this prevents charge at add_to_page_cache().

  uncharge (shmem)
	- uncharged when it's dropped from swapcache and not on shmem's
	  radix-tree.

  at migration, check against 'old page' is modified to handle shmem.

Comparing to the old version discussed (and caused troubles), we have
advantages of
  - PCG_USED bit.
  - simple migrating handling.

So, situation is much easier than several months ago, maybe.

[hugh@veritas.com: memcg: handle swap caches build fix]
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 08:31:05 -08:00
KAMEZAWA Hiroyuki
bced0520fe memcg: fix gfp_mask of callers of charge
Fix misuse of gfp_kernel.

Now, most of callers of mem_cgroup_charge_xxx functions uses GFP_KERNEL.

I think that this is from the fact that page_cgroup *was* dynamically
allocated.

But now, we allocate all page_cgroup at boot.  And
mem_cgroup_try_to_free_pages() reclaim memory from GFP_HIGHUSER_MOVABLE +
specified GFP_RECLAIM_MASK.

  * This is because we just want to reduce memory usage.
    "Where we should reclaim from ?" is not a problem in memcg.

This patch modifies gfp masks to be GFP_HIGUSER_MOVABLE if possible.

Note: This patch is not for fixing behavior but for showing sane information
      in source code.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 08:31:04 -08:00
Matt Mackall
853ac43ab1 shmem: unify regular and tiny shmem
tiny-shmem shares most of its 130 lines of code with shmem and tends to
break when particular bits of shmem get modified.  Unifying saves code and
makes keeping these two in sync much easier.

before:
  14367	    392	     24	  14783	   39bf	mm/shmem.o
    396      72       8     476	    1dc	mm/tiny-shmem.o

after:
  14367	    392	     24	  14783	   39bf	mm/shmem.o
    412	     72       8     492	    1ec	mm/shmem.o tiny

Signed-off-by: Matt Mackall <mpm@selenic.com>
Acked-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:08 -08:00
Hugh Dickins
390722baa7 mm: don't mark_page_accessed in shmem_fault
Following "mm: don't mark_page_accessed in fault path", which now
places a mark_page_accessed() in zap_pte_range(), we should remove
the mark_page_accessed() from shmem_fault().

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Johannes Weiner <hannes@saeurebad.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:58:58 -08:00
David Howells
76aac0e9a1 CRED: Wrap task credential accesses in the core kernel
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.

Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().

Change some task->e?[ug]id to task_e?[ug]id().  In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-audit@redhat.com
Cc: containers@lists.linux-foundation.org
Cc: linux-mm@kvack.org
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:39:12 +11:00
Alan Cox
731572d39f nfsd: fix vm overcommit crash
Junjiro R.  Okajima reported a problem where knfsd crashes if you are
using it to export shmemfs objects and run strict overcommit.  In this
situation the current->mm based modifier to the overcommit goes through a
NULL pointer.

We could simply check for NULL and skip the modifier but we've caught
other real bugs in the past from mm being NULL here - cases where we did
need a valid mm set up (eg the exec bug about a year ago).

To preserve the checks and get the logic we want shuffle the checking
around and add a new helper to the vm_ security wrappers

Also fix a current->mm reference in nommu that should use the passed mm

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix build]
Reported-by: Junjiro R. Okajima <hooanon05@yahoo.co.jp>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-30 11:38:47 -07:00