And pick the shortest name: 'struct maps'.
The split existed because we used to have two groups of maps, one for
functions and one for variables, but that only complicated things,
sometimes we needed to figure out what was at some address and then had
to first try it on the functions group and if that failed, fall back to
the variables one.
That split is long gone, so for quite a while we had only one struct
maps per struct map_groups, simplify things by combining those structs.
First patch is the minimum needed to merge both, follow up patches will
rename 'thread->mg' to 'thread->maps', etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-hom6639ro7020o708trhxh59@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add kernel AUX area sampling definitions, which brings perf_event.h into
line with the kernel version.
New sample type PERF_SAMPLE_AUX requests a sample of the AUX area
buffer. New perf_event_attr member 'aux_sample_size' specifies the
desired size of the sample.
Also add support for parsing samples containing AUX area data i.e.
PERF_SAMPLE_AUX.
Committer notes:
I squashed the first two patches in this series to avoid breaking
automatic bisection, i.e. after applying only the original first patch
in this series we would have:
# perf test -v parsing
26: Sample parsing :
--- start ---
test child forked, pid 17018
sample format has changed, some new PERF_SAMPLE_ bit was introduced - test needs updating
test child finished with -1
---- end ----
Sample parsing: FAILED!
#
With the two paches combined:
# perf test parsing
26: Sample parsing : Ok
#
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Record the first event parsing error and report. Implementing feedback
from Jiri Olsa:
https://lkml.org/lkml/2019/10/28/680
An example error is:
$ tools/perf/perf stat -e c/c/
WARNING: multiple event parsing errors
event syntax error: 'c/c/'
\___ unknown term
valid terms: event,filter_rem,filter_opc0,edge,filter_isoc,filter_tid,filter_loc,filter_nc,inv,umask,filter_opc1,tid_en,thresh,filter_all_op,filter_not_nm,filter_state,filter_nm,config,config1,config2,name,period,percore
Initial error:
event syntax error: 'c/c/'
\___ Cannot find PMU `c'. Missing kernel support?
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20191116074652.9960-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To help in passing that info around to callchain routines that, for the
same reason, are moving to use 'struct map_symbol'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-epsiibeprpxa8qpwji47uskc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The test case 'Read backward ring buffer' failed on 32-bit architectures
which were found by LKFT perf testing. The test failed on arm32 x15
device, qemu_arm32, qemu_i386, and found intermittent failure on i386;
the failure log is as below:
50: Read backward ring buffer :
--- start ---
test child forked, pid 510
Using CPUID GenuineIntel-6-9E-9
mmap size 1052672B
mmap size 8192B
Finished reading overwrite ring buffer: rewind
free(): invalid next size (fast)
test child interrupted
---- end ----
Read backward ring buffer: FAILED!
The log hints there have issue for memory usage, thus free() reports
error 'invalid next size' and directly exit for the case. Finally, this
issue is root caused as out of bounds memory access for the data array
'evsel->id'.
The backward ring buffer test invokes do_test() twice. 'evsel->id' is
allocated at the first call with the flow:
test__backward_ring_buffer()
`-> do_test()
`-> evlist__mmap()
`-> evlist__mmap_ex()
`-> perf_evsel__alloc_id()
So 'evsel->id' is allocated with one item, and it will be used in
function perf_evlist__id_add():
evsel->id[0] = id
evsel->ids = 1
At the second call for do_test(), it skips to initialize 'evsel->id'
and reuses the array which is allocated in the first call. But
'evsel->ids' contains the stale value. Thus:
evsel->id[1] = id -> out of bound access
evsel->ids = 2
To fix this issue, we will use evlist__open() and evlist__close() pair
functions to prepare and cleanup context for evlist; so 'evsel->id' and
'evsel->ids' can be initialized properly when invoke do_test() and avoid
the out of bounds memory access.
Fixes: ee74701ed8 ("perf tests: Add test to check backward ring buffer")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: stable@vger.kernel.org # v4.10+
Link: http://lore.kernel.org/lkml/20191107020244.2427-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To reduce boilerplate, providing a more compact form to iterate over the
maps in a map_group.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-gc3go6fmdn30twusg91t2q56@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To reduce boilerplate, provide a more compact form using an idiom
present in other trees of data structures.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-59gmq4kg1r68ou1wknyjl78x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Correct typo in comment: s/suck/stuck.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reported-by: Will Deacon <will@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191023083324.12093-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As there are several discussions for enabling perf breakpoint signal
testing on arm64 platform: arm64 needs to rely on single-step to execute
the breakpointed instruction and then reinstall the breakpoint exception
handler. But if we hook the breakpoint with a signal, the signal
handler will do the stepping rather than the breakpointed instruction,
this causes infinite loops as below:
Kernel space | Userspace
---------------------------------|--------------------------------
| __test_function() -> hit
| breakpoint
breakpoint_handler() |
`-> user_enable_single_step() |
do_signal() |
| sig_handler() -> Step one
| instruction and
| trap to kernel
single_step_handler() |
`-> reinstall_suspended_bps() |
| __test_function() -> hit
| breakpoint again and
| repeat up flow infinitely
As Will Deacon mentioned [1]: "that we require the overflow handler to
do the stepping on arm/arm64, which is relied upon by GDB/ptrace. The
hw_breakpoint code is a complete disaster so my preference would be to
rip out the perf part and just implement something directly in ptrace,
but it's a pretty horrible job". Though Will commented this on arm
architecture, but the comment also can apply on arm64 architecture.
For complete information, I searched online and found a few years back,
Wang Nan sent one patch 'arm64: Store breakpoint single step state into
pstate' [2]; the patch tried to resolve this issue by avoiding single
stepping in signal handler and defer to enable the signal stepping when
return to __test_function(). The fixing was not merged due to the
concern for missing to handle different usage cases.
Based on the info, the most feasible way is to skip Perf breakpoint
signal testing for arm64 and this could avoid the duplicate
investigation efforts when people see the failure. This patch skips
this case on arm64 platform, which is same with arm architecture.
[1] https://lkml.org/lkml/2018/11/15/205
[2] https://lkml.org/lkml/2015/12/23/477
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Brajeswar Ghosh <brajeswar.linux@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Will Deacon <will@kernel.org>
Link: http://lore.kernel.org/lkml/20191018085531.6348-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The arm architecture supports breakpoint accounting but it doesn't
support breakpoint overflow signal handling. The current code uses the
same checking helper, thus it disables both testings (bp_account and
bp_signal) for arm platform.
For handling two testings separately, this patch adds a dedicated
checking helper is_supported() for breakpoint accounting testing, thus
it allows supporting breakpoint accounting testing on arm platform; the
old helper test__bp_signal_is_supported() is only used to checking for
breakpoint overflow signal testing.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Brajeswar Ghosh <brajeswar.linux@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Will Deacon <will@kernel.org>
Link: http://lore.kernel.org/lkml/20191018085531.6348-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A few headers are not needed and were introduced by copying from other
test file. This patch removes the needless headers for the breakpoint
accounting testing.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Brajeswar Ghosh <brajeswar.linux@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Will Deacon <will@kernel.org>
Link: http://lore.kernel.org/lkml/20191018085531.6348-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When executing the task exit testing case, perf gets stuck in an endless
loop this case and doesn't return back on Arm64 Juno board.
After digging into this issue, since Juno board has Arm's big.LITTLE
CPUs, thus the PMUs are not compatible between the big CPUs and little
CPUs. This leads to a PMU event that cannot be enabled properly when
the traced task is migrated from one variant's CPU to another variant.
Finally, the test case runs into infinite loop for cannot read out any
event data after return from polling.
Eventually, we need to work out formal solution to allow PMU events can
be freely migrated from one CPU variant to another, but this is a
difficult task and a different topic. This patch tries to fix the Perf
test case to avoid infinite loop, when the testing detects 1000 times
retrying for reading empty events, it will directly bail out and return
failure. This allows the Perf tool can continue its other test cases.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20191011091942.29841-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When fail to mmap events in task exit case, it misses to set 'err' to
-1; thus the testing will not report failure for it.
This patch sets 'err' to -1 when fails to mmap events, thus Perf tool
can report correct result.
Fixes: d723a55096 ("perf test: Add test case for checking number of EXIT events")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20191011091942.29841-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move perf_mmap__read_event() from tools/perf to libperf and export it in
the perf/mmap.h header.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191007125344.14268-13-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move perf_mmap__read_init() from tools/perf to libperf and export it in
the perf/mmap.h header.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191007125344.14268-12-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move perf_mmap__read_init() from tools/perf to libperf and export it in
perf/mmap.h header.
And add pr_debug2()/pr_debug3() macros support, because the code is
using them.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191007125344.14268-11-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move perf_mmap__consume() vrom tools/perf to libperf and export it in
the perf/mmap.h header.
Move also the needed helpers perf_mmap__write_tail(),
perf_mmap__read_head() and perf_mmap__empty().
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191007125344.14268-10-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
An optimized build such as:
make -C tools/perf CLANG=1 CC=clang EXTRA_CFLAGS="-O3
will turn the dereference operation into a ud2 instruction, raising a
SIGILL rather than a SIGSEGV. Use raise(..) for correctness and clarity.
Similar issues were addressed in Numfor Mbiziwo-Tiapo's patch:
https://lkml.org/lkml/2019/7/8/1234
Committer testing:
Before:
[root@quaco ~]# perf test hooks
55: perf hooks : Ok
[root@quaco ~]# perf test -v hooks
55: perf hooks :
--- start ---
test child forked, pid 17092
SIGSEGV is observed as expected, try to recover.
Fatal error (SEGFAULT) in perf hook 'test'
test child finished with 0
---- end ----
perf hooks: Ok
[root@quaco ~]#
After:
[root@quaco ~]# perf test hooks
55: perf hooks : Ok
[root@quaco ~]# perf test -v hooks
55: perf hooks :
--- start ---
test child forked, pid 17909
SIGSEGV is observed as expected, try to recover.
Fatal error (SEGFAULT) in perf hook 'test'
test child finished with 0
---- end ----
perf hooks: Ok
[root@quaco ~]#
Fixes: a074865e60 ("perf tools: Introduce perf hooks")
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lore.kernel.org/lkml/20190925195924.152834-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move perf_evlist__poll() from tools/perf to libperf, it will be used in
the following patches.
And rename the existing perf's function to evlist__poll().
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-39-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That was done just to have users of writen() and readn(), that before
had their prototypes in util/util.h to get it without having to add an
include for internal/lib.h, but the right way is to add it and by now
all places already do it.
Fix a fallout were readlink() was used but unistd.h was being obtained
by luck thru util.h -> internal/lib.h, now to check why unistd.h is
being included there...
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-lcnytgrtafey3kwlfog2rzzj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need the 'page_size' variable in libperf, so move it there.
Add a libperf_init() as a global libperf init function to obtain this
value via sysconf() at tool start.
Committer notes:
Add internal/lib.h to tools/perf/ files using 'page_size', sometimes
replacing util.h with it if that was the only reason for having util.h
included.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-33-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the perf_evlist__id_add() function to libperf as an internal
function. We already have the 'heads' member in 'struct perf_evlist'.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-31-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add perf_evlist__first()/last() functions to libperf, as internal
functions and rename perf's origins to evlist__first/last.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-29-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add perf_evsel__alloc_id()/perf_evsel__free_id() functions to libperf as
internal functions.
Move 'struct perf_sample_id' to internal/evsel.h header and change
'struct perf_sample_id::evsel' to 'struct perf_evsel' and the related
code that touches it.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-28-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving 'nr_mmaps' from 'struct evlist' to 'struct perf_evlist', it will
be used in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-21-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the 'system_wide 'member from perf's evsel to libperf's perf_evsel.
Committer notes:
Added stdbool.h as we now use bool here.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-20-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As this isn't used at all in mmap.h but in evlist.h, so to cut down the
header dependency tree, move it to where it is used.
Also add mmap.h to the places using it but previously getting it
indirectly via evlist.h.
Add missing pthread.h to evlist.h, as it has a pthread_t struct member
and was getting the header via mmap.h.
Noticed while processing a Jiri's libperf batch touching mmap.h, where
almost everything gets rebuilt because evlist.h is so popular, so cut
down't this rebuild the world party.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lkml.kernel.org/n/tip-he0uljeftl0xfveh3d6vtode@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename perf_evlist__munmap() to evlist__munmap(), so we don't have a
name clash when we add perf_evlist__munmap() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename perf_evlist__mmap() to evlist__mmap(), so we don't have a name
clash when we add perf_evlist__mmap() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename 'struct perf_evlist' to 'struct evlist', so we don't have a name
clash when we add 'struct perf_mmap' to libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch is to return error code of perf_new_session function on
failure instead of NULL.
Test Results:
Before Fix:
$ perf c2c report -input
failed to open nput: No such file or directory
$ echo $?
0
$
After Fix:
$ perf c2c report -input
failed to open nput: No such file or directory
$ echo $?
254
$
Committer notes:
Fix 'perf tests topology' case, where we use that TEST_ASSERT_VAL(...,
session), i.e. we need to pass zero in case of failure, which was the
case before when NULL was returned by perf_session__new() for failure,
but now we need to negate the result of IS_ERR(session) to respect that
TEST_ASSERT_VAL) expectation of zero meaning failure.
Reported-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com>
Signed-off-by: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com>
Acked-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shawn Landden <shawn@git.icu>
Cc: Song Liu <songliubraving@fb.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Link: http://lore.kernel.org/lkml/20190822071223.17892.45782.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Disable the potentional shared library features, which breaks static
build if they are enabled and detected: jvmti and vdso libraries.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20190905090924.GA1949@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is a spelling mistake in a TEST_ASSERT_VAL message. Fix it.
Signed-off-by: Colin King <colin.king@canonical.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Link: http://lore.kernel.org/lkml/20190911152148.17031-1-colin.king@canonical.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Those are the only routines using the perf_event__handler_t typedef and
are all related, so move to a separate header to reduce the header
dependency tree, lots of places were getting event.h and even stdio.h,
limits.h indirectly, so fix those as well.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-yvx9u1mf7baq6cu1abfhbqgs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Only a 'struct perf_cmp_map' forward allocation is necessary, fix the
places that need the header but were getting it indirectly, by luck,
from env.h.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-3sj3n534zghxhk7ygzeaqlx9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Check that it is not needed and remove, fixing up some fallout for
places where it was only serving to get something else.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-9h6dg6lsqe2usyqjh5rrues4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pruning a bit more the includes dependency tree. Building this thing on
lots of containers takes time, we better reduce the time per build, each
container is doing 6 builds when clang and clang-devel are available,
and the plan is to do a 'make -C tools/perf build-test' that have many
more.
Also helps when doing normal development, as touching some random file
will have a much reduced chance of triggering lots of rebuilds.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-r889ur2cxe16m91m2a4pl15p@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a libperf build test, that is triggered when one does:
$ make -C tools/perf build-test
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20190901124822.10132-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The mem_info struct goes to mem-events.h and branch_info goes to
branch.h, where they belong, this way we can remove several headers from
symbols.h and trim the include dependency tree more.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-aupw71xnravcsu2xoabfmhpc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we don't carry the session.h include directive in auxtrace.h,
which in turn opens a can of worms of files that were getting all sorts
of things via that include, fix them all.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-d2d83aovpgri2z75wlitquni@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove the last unneeded use of cache.h in a header, we can check where
it is really needed, i.e. we can remove it and be sure that it isn't
being obtained indirectly.
This is an old file, used by now incorrectly in many places, so it was
providing includes needed indirectly, fixup this fallout.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-3x3l8gihoaeh7714os861ia7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that evlist.h isn't included by any other header, we can check where
it is really needed, i.e. we can remove it and be sure that it isn't
being obtained indirectly.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-6d7kape36m94a266md0d3xbh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that thread.h isn't included by any other header, we can check where
it is really needed, i.e. we can remove it and be sure that it isn't
being obtained indirectly.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-kh333ivjbw05wsggckpziu86@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that map.h isn't included by any other header, we can check where
it is really needed, i.e. we can remove it and be sure that it isn't
being obtained indirectly.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-iu8ylqky7g1i9i54v3y7qovw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can reduce the header dependency tree further, in the process
noticed that lots of places were getting even things like build-id
routines and 'struct perf_tool' definition indirectly, so fix all those
too.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-ti0btma9ow5ndrytyoqdk62j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And fixup the fallout of c files not building due to now missing
headers.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-sw8k3kpla98pr3rqypbjk9hf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
All we need there is a forward declaration for 'union perf_event', so
remove it from there and add missing header directives in places using
things from this indirect include.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-7ftk0ztstqub1tirjj8o8xbl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And fix the fallout, adding it to places that must have it since they
use its definitions.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-1s3jel4i26chq2g0lydoz7i3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With the movement of lots of stuff out of perf.h to other headers we
ended up not needing it in lots of places, remove it from those places.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-c718m0sxxwp73lp9d8vpihb4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And remove unneeded include directives from perf-sys.h to prune the
header dependency tree.
Fixup the fallout in places where definitions were being used without
the needed include directives that were being satisfied because they
were in perf-sys.h.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-7b1zvugiwak4ibfa3j6ott7f@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Even more, to have a "perf_record_" prefix, so that they match the
PERF_RECORD_ enum they map to.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190828135717.7245-23-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is no need for that util/util.h include there and, remove it,
pruning the include tree, fix the fallout by adding necessary headers to
places that were getting needed includes indirectly from evlist.h ->
util.h.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-s9f7uve8wvykr5itcm7m7d8q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Even more, to have a "perf_record_" prefix, so that they match the
PERF_RECORD_ enum they map to.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-qbabmcz2a0pkzt72liyuz3p8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running 'perf test' with zstd compression linked will hang at the test
'Zstd perf.data compression/decompression' because /dev/random blocks
reads until there is enough entropy. This means that the test will
appear to never complete unless the mouse is continually moved while
running it.
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/3d8cc701-df4e-f949-1715-5118b530e990@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And into a separate util/record.h, to better isolate things and make
sure that those who use record_opts and the other moved declarations
are explicitly including the necessary header.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-31q8mei1qkh74qvkl9nwidfq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So it's part of libperf library as basic functions operating on
perf_thread_map objects.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190822111141.25823-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The util/cpumap.h file doesn't use anything in refcount.h not in
debug.h, it needs just a forward reference to 'struct cpu_map_data',
that is defined in util/event.h and cpumap.h was getting indirectly via,
of all things, debug.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-mtjww98yptt4ppo6g2blavg5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Those are getting counts.h via evsel.h, that don't strictly need
counts.h, just forward declarations for some structs, so add it here
before we remove it from there.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-phldqlfxxu563txja7evd4zt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to add these so that we test building without all selectable
features.
Acked-by: Igor Lubashev <ilubashe@akamai.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Link: https://lkml.kernel.org/n/tip-eknnvp22elznj0cl5a39hc4v@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get the expected output we have to ignore whatever changes the user
has in its ~/.perfconfig file, so set PERF_CONFIG to /dev/null to
achieve that.
Before:
# egrep 'trace|show_' ~/.perfconfig
[trace]
show_zeros = yes
show_duration = no
show_timestamp = no
show_arg_names = no
show_prefix = yes
# echo $PERF_CONFIG
# perf test "trace + vfs_getname"
70: Check open filename arg using perf trace + vfs_getname: FAILED!
# export PERF_CONFIG=/dev/null
# perf test "trace + vfs_getname"
70: Check open filename arg using perf trace + vfs_getname: Ok
#
After:
# egrep 'trace|show_' ~/.perfconfig
[trace]
show_zeros = yes
show_duration = no
show_timestamp = no
show_arg_names = no
show_prefix = yes
# echo $PERF_CONFIG
# perf test "trace + vfs_getname"
70: Check open filename arg using perf trace + vfs_getname: Ok
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: https://lkml.kernel.org/n/tip-3up27pexg5i3exuzqrvt4m8u@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the perf_evsel__read() function to libperf as a public interface
together with struct perf_counts_values for returning counter values.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-65-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add perf_evsel__close() function to libperf while keeping a tools/perf
specific evsel__close() to free ids.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-64-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the nr_members member from perf's evsel to libperf's perf_evsel.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-60-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the evlist__set_maps() function from tools/perf to libperf.
Committer notes:
Fix up reject due to earlier inversion in calling perf_evlist__init().
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-57-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving the following functions from tools/perf:
cpu_map__new()
cpu_map__read()
to libperf with the following names:
perf_cpu_map__new()
perf_cpu_map__read()
Committer notes:
Fixed up this one:
tools/perf/arch/arm/util/cs-etm.c
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-44-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the perf_event_attr struct fron 'struct evsel' to 'struct perf_evsel'.
Committer notes:
Fixed up these:
tools/perf/arch/arm/util/auxtrace.c
tools/perf/arch/arm/util/cs-etm.c
tools/perf/arch/arm64/util/arm-spe.c
tools/perf/arch/s390/util/auxtrace.c
tools/perf/util/cs-etm.c
Also
cc1: warnings being treated as errors
tests/sample-parsing.c: In function 'do_test':
tests/sample-parsing.c:162: error: missing initializer
tests/sample-parsing.c:162: error: (near initialization for 'evsel.core.cpus')
struct evsel evsel = {
.needs_swap = false,
- .core.attr = {
- .sample_type = sample_type,
- .read_format = read_format,
+ .core = {
+ . attr = {
+ .sample_type = sample_type,
+ .read_format = read_format,
+ },
[perfbuilder@a70e4eeb5549 /]$ gcc --version |& head -1
gcc (GCC) 4.4.7
Also we don't need to include perf_event.h in
tools/perf/lib/include/perf/evsel.h, forward declaring 'struct
perf_event_attr' is enough. And this even fixes the build in some
systems where things are used somewhere down the include path from
perf_event.h without defining __always_inline.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-43-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move nr_entries count from 'struct perf' to into perf_evlist struct.
Committer notes:
Fix tools/perf/arch/s390/util/auxtrace.c case. And also the comment in
tools/perf/util/annotate.h.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-42-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the following functions:
thread_map__get()
thread_map__put()
thread_map__comm()
to libperf with the following names:
perf_thread_map__get()
perf_thread_map__put()
perf_thread_map__comm()
Add the perf_thread_map__comm() function for it to work/compile.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-34-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving the following functions:
thread_map__new_dummy()
thread_map__realloc()
thread_map__set_pid()
to libperf with the following names:
perf_thread_map__new_dummy()
perf_thread_map__realloc()
perf_thread_map__set_pid()
the other 2 functions are dependencies of the
perf_thread_map__new_dummy() function.
The perf_thread_map__realloc() function is not exported.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-33-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving the following functions:
cpu_map__get()
cpu_map__put()
to libperf with following names:
perf_cpu_map__get()
perf_cpu_map__put()
Committer notes:
Added fixes for arm/arm64
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-31-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename perf_evlist__disable() to evlist__disable(), so we don't have a
name clash when we add perf_evlist__disable() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-23-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename perf_evlist__enable() to evlist__enable(), so we don't have a
name clash when we add perf_evlist__enable() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-22-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename perf_evlist__open() to evlist__open(), so we don't have a name
clash when we add perf_evlist__open() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-20-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Renaming perf_evsel__disable() to evsel__disable(), so we don't have a
name clash when we add perf_evsel__disable() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-17-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename perf_evsel__enable() to evsel__enable(), so we don't have a name
clash when we add perf_evsel__enable() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-16-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename perf_evsel__open() to evsel__open(), so we don't have a name
clash when we add perf_evsel__open() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-15-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename perf_evlist__add() to evlist__add(), so we don't have a name
clash when we add perf_evlist__add() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-13-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename perf_evsel__new() to evsel__new(), so we don't have a name clash
when we add perf_evsel__new() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-12-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remame perf_evsel__delete() to evsel__delete(), so we don't have a name
clash when we add perf_evsel__delete() in libperf.
Also renaming perf_evsel__delete_priv() to evsel__delete_priv().
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-11-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename perf_evlist__delete() to evlist__delete(), so we don't have a
name clash when we add perf_evlist__delete() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-10-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename perf_evlist__new() to evlist__new(), so we don't have a name
clash when we add perf_evlist__new() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-9-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename struct perf_evlist to struct evlist, so we don't have a name
clash when we add struct perf_evlist in libperf.
Committer notes:
Added fixes to build on arm64, from Jiri and from me
(tools/perf/util/cs-etm.c)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename struct perf_evsel to struct evsel, so we don't have a name clash
when we add struct perf_evsel in libperf.
Committer notes:
Added fixes for arm64, provided by Jiri.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename struct thread_map to struct perf_thread_map, so it could be part
of libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename struct cpu_map to struct perf_cpu_map, so it could be part of
libperf.
Committer notes:
Added fixes for arm64, provided by Jiri.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I noticed that the 'perf test bpf' was failing:
# perf test bpf
41: BPF filter :
41.1: Basic BPF filtering : Skip
41.2: BPF pinning : Skip
41.3: BPF prologue generation : Skip
41.4: BPF relocation checker : Skip
# ulimit -l
64
#
Using verbose mode we get just a line bout -EPERF being returned from
libbpf's bpf_load_program_xattr(), that ends up being used in 'perf
test bpf' initial program loading capability query:
Missing basic BPF support, skip this test: Operation not permitted
Not that informative, but on a separate problem when creating BPF maps
bumping rlimit(MEMLOCK) helped, so I tried it here as well, works:
# ulimit -l 128
# perf test bpf
41: BPF filter :
41.1: Basic BPF filtering : Ok
41.2: BPF pinning : Ok
41.3: BPF prologue generation : Ok
41.4: BPF relocation checker : Ok
#
So use the recently added rlimit__bump_memlock() helper:
# ulimit -l 64
# perf test bpf
41: BPF filter :
41.1: Basic BPF filtering : Ok
41.2: BPF pinning : Ok
41.3: BPF prologue generation : Ok
41.4: BPF relocation checker : Ok
# ulimit -l
64
#
I.e. the bumping of memlock is restricted to the 'perf test' instance,
not changing the global value.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-b9fubkhr4jm192lu7y8hgjvo@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To allow for destructors to check if they're operating on a object still
in a list, and to avoid going from use after free list entries into
still valid, or even also other already removed from list entries.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-deh17ub44atyox3j90e6rksu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In places where the equivalent was already being done, i.e.:
free(a);
a = NULL;
And in placs where struct members are being freed so that if we have
some erroneous reference to its struct, then accesses to freed members
will result in segfaults, which we can detect faster than use after free
to areas that may still have something seemingly valid.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-jatyoofo5boc1bsvoig6bb6i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Eroding a bit more the tools/perf/util/util.h hodpodge header.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-natazosyn9rwjka25tvcnyi0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Part of the erosion of util/util.h, that will lose its include stdlib.h,
we need to add it to places where it is needed but was getting it
indirectly.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-1imnqezw99ahc07fjeb51qby@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running the 'perf test' command after building perf with a memory
sanitizer causes a warning that says:
WARNING: MemorySanitizer: use-of-uninitialized-value... in mmap-thread-lookup.c
Initializing the go variable to 0 silences this harmless warning.
Committer warning:
This was harmless, just a simple test writing whatever was at that
sizeof(int) memory area just to signal another thread blocked reading
that file created with pipe(). Initialize it tho so that we don't get
this warning.
Signed-off-by: Numfor Mbiziwo-Tiapo <nums@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Drayton <mbd@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190702173716.181223-1-nums@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'probe libc's inet_pton & backtrace it with ping' testcase sometimes
fails on powerpc because distro ping binary does not have symbol
information and thus it prints "[unknown]" function name in the
backtrace.
Accept "[unknown]" as valid function name for powerpc as well.
# perf test -v "probe libc's inet_pton & backtrace it with ping"
Before:
59: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 79695
ping 79718 [077] 96483.787025: probe_libc:inet_pton: (7fff83a754c8)
7fff83a754c8 __GI___inet_pton+0x8 (/usr/lib64/power9/libc-2.28.so)
7fff83a2b7a0 gaih_inet.constprop.7+0x1020
(/usr/lib64/power9/libc-2.28.so)
7fff83a2c170 getaddrinfo+0x160 (/usr/lib64/power9/libc-2.28.so)
1171830f4 [unknown] (/usr/bin/ping)
FAIL: expected backtrace entry
".*\+0x[[:xdigit:]]+[[:space:]]\(.*/bin/ping.*\)$"
got "1171830f4 [unknown] (/usr/bin/ping)"
test child finished with -1
---- end ----
probe libc's inet_pton & backtrace it with ping: FAILED!
After:
59: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 79085
ping 79108 [045] 96400.214177: probe_libc:inet_pton: (7fffbb9654c8)
7fffbb9654c8 __GI___inet_pton+0x8 (/usr/lib64/power9/libc-2.28.so)
7fffbb91b7a0 gaih_inet.constprop.7+0x1020
(/usr/lib64/power9/libc-2.28.so)
7fffbb91c170 getaddrinfo+0x160 (/usr/lib64/power9/libc-2.28.so)
132e830f4 [unknown] (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Reviewed-by: Kim Phillips <kim.phillips@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Fixes: 1632936480 ("perf tests: Fix record+probe_libc_inet_pton.sh without ping's debuginfo")
Link: http://lkml.kernel.org/r/1561630614-3216-1-git-send-email-s1seetee@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving more stuff out of tools/perf/util/ and using the kernel idiom.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-wpj8rktj62yse5dq6ckny6de@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We got the sane_ctype.h headers from git and kept using it so far, but
since that code originally came from the kernel sources to the git
sources, perhaps its better to just use the one in the kernel, so that
we can leverage tools/perf/check_headers.sh to be notified when our copy
gets out of sync, i.e. when fixes or goodies are added to the code we've
copied.
This will help with things like tools/lib/string.c where we want to have
more things in common with the kernel, such as strim(), skip_spaces(),
etc so as to go on removing the things that we have in tools/perf/util/
and instead using the code in the kernel, indirectly and removing things
like EXPORT_SYMBOL(), etc, getting notified when fixes and improvements
are made to the original code.
Hopefully this also should help with reducing the difference of code
hosted in tools/ to the one in the kernel proper.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-7k9868l713wqtgo01xxygn12@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-p0kg493z2m8qizjbdefzip1i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Command
# perf test -Fv 6
fails with error
running test 100 'kvm-s390:kvm_s390_create_vm' failed to parse
event 'kvm-s390:kvm_s390_create_vm', err -1, str 'unknown tracepoint'
event syntax error: 'kvm-s390:kvm_s390_create_vm'
\___ unknown tracepoint
when the kvm module is not loaded or not built in.
Fix this by adding a valid function which tests if the module
is loaded. Loaded modules (or builtin KVM support) have a
directory named
/sys/kernel/debug/tracing/events/kvm-s390
for this tracepoint.
Check for existence of this directory.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20190604053504.43073-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently only a single explicit time range is accepted. Add support for
multiple ranges separated by spaces, which requires the string to be
quoted. Update the time utils test accordingly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-20-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test time ranges work as expected.
Committer testing:
$ perf test "time utils"
59: time utils : Ok
$ perf test -v "time utils"
59: time utils :
--- start ---
test child forked, pid 31711
parse_nsec_time("0")
0
parse_nsec_time("1")
1000000000
parse_nsec_time("0.000000001")
1
parse_nsec_time("1.000000001")
1000000001
parse_nsec_time("123456.123456")
123456123456000
parse_nsec_time("1234567.123456789")
1234567123456789
parse_nsec_time("18446744073.709551615")
18446744073709551615
perf_time__parse_str("1234567.123456789,1234567.123456789")
start time 1234567123456789, end time 1234567123456789
perf_time__parse_str("1234567.123456789,1234567.123456790")
start time 1234567123456789, end time 1234567123456790
perf_time__parse_str("1234567.123456789,")
start time 1234567123456789, end time 0
perf_time__parse_str(",1234567.123456789")
start time 0, end time 1234567123456789
perf_time__parse_str("0,1234567.123456789")
start time 0, end time 1234567123456789
perf_time__parse_for_ranges("1234567.123456789,1234567.123456790")
start time 1234567123456789, end time 1234567123456790
perf_time__parse_for_ranges("10%/1")
first_sample_time 7654321000000000 last_sample_time 7654321000000100
start time 0: 7654321000000000, end time 0: 7654321000000009
perf_time__parse_for_ranges("10%/2")
first_sample_time 7654321000000000 last_sample_time 7654321000000100
start time 0: 7654321000000010, end time 0: 7654321000000019
perf_time__parse_for_ranges("10%/1,10%/2")
first_sample_time 11223344000000000 last_sample_time 11223344000000100
start time 0: 11223344000000000, end time 0: 11223344000000009
start time 1: 11223344000000010, end time 1: 11223344000000019
perf_time__parse_for_ranges("10%/1,10%/3,10%/10")
first_sample_time 11223344000000000 last_sample_time 11223344000000100
start time 0: 11223344000000000, end time 0: 11223344000000009
start time 1: 11223344000000020, end time 1: 11223344000000029
start time 2: 11223344000000090, end time 2: 11223344000000100
test child finished with 0
---- end ----
time utils: Ok
$
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-19-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add map_groups__merge_in test to test the map_groups__merge_in function
usage - merging kcore maps into existing eBPF maps.
Committer testing:
# perf test merge
59: map_groups__merge_in : Ok
# perf test -v merge
59: map_groups__merge_in :
--- start ---
test child forked, pid 8349
test child finished with 0
---- end ----
map_groups__merge_in: Ok
#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190508132010.14512-10-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
No need to search for aliases for the symbol that marks the end of the
kernel text segment, the following patch will make such symbols not to
be found when searching in the kallsyms maps causing this test to fail.
So as a prep patch to avoid breaking bisection, ignore such symbols.
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lkml.kernel.org/n/tip-qfwuih8cvmk9doh7k5k244eq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The shell tests should not redirect useful output to /dev/null, as that
is done automatically by 'perf test' in non verbose mode, so remove that
from the zstd comp/decomp test, fixing up verbose mode.
Before:
$ perf test zstd
68: Zstd perf.data compression/decompression : Ok
$ perf test -v zstd
68: Zstd perf.data compression/decompression :
--- start ---
test child forked, pid 11956
-z, --compression-level[=<n>]
Collecting compressed record file:
Checking compressed events stats:
test child finished with 0
---- end ----
Zstd perf.data compression/decompression: Ok
$
Now:
$ perf test zstd
68: Zstd perf.data compression/decompression : Ok
$ perf test -v zstd
68: Zstd perf.data compression/decompression :
--- start ---
test child forked, pid 12695
Collecting compressed record file:
0+500 records in
72+1 records out
37361 bytes (37 kB, 36 KiB) copied, 9.83796 s, 3.8 kB/s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.001 MB /tmp/perf.data.rzq, compressed (original 0.004 MB, ratio is 3.679) ]
Checking compressed events stats:
# compressed : Zstd, level = 1, ratio = 4
COMPRESSED events: 3
test child finished with 0
---- end ----
Zstd perf.data compression/decompression: Ok
$
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/n/tip-tp96618ds42zic94nlh0msz3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce a basic integration test for Zstd based record
compression/decompression using 'perf record' and 'perf report'.
Committer notes:
Reduce a bit the freq (from 25 kHz to 5 kHz) and the number of /dev/null
records read (from 1000 to 500), reducing the time it takes to something
more in line with the time existing 'perf test' entries take to run.
With that in place:
$ time perf test zstd
68: Zstd perf.data compression/decompression : Ok
real 0m10.376s
user 0m0.105s
sys 0m0.440s
$ grep "model name" /proc/cpuinfo | head -1
model name : Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz
$
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/dc007ae4-104a-2b7c-316e-275929025f0d@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can test the ifdef parts for this feature.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/n/tip-7o65mfl10wlvm8v3f0ombxd1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are a couple of spelling mistakes in test assert messages. Fix them.
Signed-off-by: Colin King <colin.king@canonical.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Link: http://lkml.kernel.org/r/20190417105539.5902-1-colin.king@canonical.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To fully annotate BPF programs with source code mapping, 4 different
information are needed:
1) PERF_RECORD_KSYMBOL
2) PERF_RECORD_BPF_EVENT
3) bpf_prog_info
4) btf
This patch handles 3) and 4) for BPF programs loaded after 'perf
record|top'.
For timely process of these information, a dedicated event is added to
the side band evlist.
When PERF_RECORD_BPF_EVENT is received via the side band event, the
polling thread gathers 3) and 4) vis sys_bpf and store them in perf_env.
This information is saved to perf.data at the end of 'perf record'.
Committer testing:
The 'wakeup_watermark' member in 'struct perf_event_attr' is inside a
unnamed union, so can't be used in a struct designated initialization
with older gccs, get it out of that, isolating as 'attr.wakeup_watermark
= 1;' to work with all gcc versions.
We also need to add '--no-bpf-event' to the 'perf record'
perf_event_attr tests in 'perf test', as the way that that test goes is
to intercept the events being setup and looking if they match the fields
described in the control files, since now it finds first the side band
event used to catch the PERF_RECORD_BPF_EVENT, they all fail.
With these issues fixed:
Same scenario as for testing BPF programs loaded before 'perf record' or
'perf top' starts, only start the BPF programs after 'perf record|top',
so that its information get collected by the sideband threads, the rest
works as for the programs loaded before start monitoring.
Add missing 'inline' to the bpf_event__add_sb_event() when
HAVE_LIBBPF_SUPPORT is not defined, fixing the build in systems without
binutils devel files installed.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190312053051.2690567-16-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
=================================================================
==20875==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 1160 byte(s) in 1 object(s) allocated from:
#0 0x7f1b6fc84138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138)
#1 0x55bd50005599 in zalloc util/util.h:23
#2 0x55bd500068f5 in perf_evsel__newtp_idx util/evsel.c:327
#3 0x55bd4ff810fc in perf_evsel__newtp /home/work/linux/tools/perf/util/evsel.h:216
#4 0x55bd4ff81608 in test__perf_evsel__tp_sched_test tests/evsel-tp-sched.c:69
#5 0x55bd4ff528e6 in run_test tests/builtin-test.c:358
#6 0x55bd4ff52baf in test_and_print tests/builtin-test.c:388
#7 0x55bd4ff543fe in __cmd_test tests/builtin-test.c:583
#8 0x55bd4ff5572f in cmd_test tests/builtin-test.c:722
#9 0x55bd4ffc4087 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
#10 0x55bd4ffc45c6 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
#11 0x55bd4ffc49ca in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
#12 0x55bd4ffc5138 in main /home/changbin/work/linux/tools/perf/perf.c:520
#13 0x7f1b6e34809a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)
Indirect leak of 19 byte(s) in 1 object(s) allocated from:
#0 0x7f1b6fc83f30 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedf30)
#1 0x7f1b6e3ac30f in vasprintf (/lib/x86_64-linux-gnu/libc.so.6+0x8830f)
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fixes: 6a6cd11d4e ("perf test: Add test for the sched tracepoint format fields")
Link: http://lkml.kernel.org/r/20190316080556.3075-17-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Optimization level '-Og' offers a reasonable level of optimization while
maintaining fast compilation and a good debugging experience. This patch
tries to make it work.
$ make DEBUG=1 EXTRA_CFLAGS='-Og'
bench/epoll-ctl.c: In function ‘do_threads’:
bench/epoll-ctl.c:274:9: error: ‘ret’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
return ret;
^~~
...
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20190316080556.3075-4-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 489338a717 ("perf tests evsel-tp-sched: Fix bitwise operator")
causes test case 14 "Parse sched tracepoints fields" to fail on s390.
This test succeeds on x86.
In fact this test now fails on all architectures with type char treated
as type unsigned char.
The root cause is the signed-ness of character arrays in the tracepoints
sched_switch for structure members prev_comm and next_comm.
On s390 the output of:
[root@m35lp76 perf]# cat /sys/kernel/debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 287
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
...
field:char prev_comm[16]; offset:8; size:16; signed:0;
...
field:char next_comm[16]; offset:40; size:16; signed:0;
reveals the character arrays prev_comm and next_comm are per
default unsigned char and have values in the range of 0..255.
On x86 both fields are signed as this output shows:
[root@f29]# cat /sys/kernel/debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 287
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
...
field:char prev_comm[16]; offset:8; size:16; signed:1;
...
field:char next_comm[16]; offset:40; size:16; signed:1;
and the character arrays prev_comm and next_comm are per default signed
char and have values in the range of -1..127. The implementation of
type char is architecture specific.
Since the character arrays in both tracepoints sched_switch and
sched_wakeup should contain ascii characters, simply omit the check for
signedness in the test case.
Output before:
[root@m35lp76 perf]# ./perf test -F 14
14: Parse sched tracepoints fields :
--- start ---
sched:sched_switch: "prev_comm" signedness(0) is wrong, should be 1
sched:sched_switch: "next_comm" signedness(0) is wrong, should be 1
sched:sched_wakeup: "comm" signedness(0) is wrong, should be 1
---- end ----
14: Parse sched tracepoints fields : FAILED!
[root@m35lp76 perf]#
Output after:
[root@m35lp76 perf]# ./perf test -Fv 14
14: Parse sched tracepoints fields :
--- start ---
---- end ----
Parse sched tracepoints fields: Ok
[root@m35lp76 perf]#
Fixes: 489338a717 ("perf tests evsel-tp-sched: Fix bitwise operator")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20190219153639.31267-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If perf was built without trace support, the trace+probe_vfs_getname.sh
'perf test' entry fails:
# perf trace -h
perf: 'trace' is not a perf-command. See 'perf --help'
# perf test 64
64: Check open filename arg using perf trace + vfs_getname: FAILED!
Check trace support, so that we'll skip the test in that case:
# perf test 64
64: Check open filename arg using perf trace + vfs_getname: Skip
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190215134253.11454-1-tt.rantala@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixing legacy symbol events parsing. We can't support single slash
separator, like 'cycles/u', because it conflicts with non empty terms,
like 'cycles/period/u'.
Keeping only '//' and ':' separator for these events:
cycles//u
cycles:k
And removing '/' separator support, which is not working
anymore. Also adding automated tests for above events.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190213123246.4015-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Hardware tracing:
Adrian Hunter:
- Handle calls optimized into jumps to a different symbol
in the thread stack routines used to process hardware traces (Adrian Hunter)
Intel PT:
Adrian Hunter:
- Fix overlap calculation for padding.
- Fix CYC timestamp calculation after OVF.
- Packet splitting can only happen in 32-bit.
- Add timestamp to auxtrace errors.
ARM CoreSight:
Leo Yan:
- Add last instruction information in packet
- Set sample flags for instruction range, exception and
return packets and for a trace discontinuity.
- Add exception number in exception packet
- Change tuple from traceID-CPU# to traceID-metadata
- Add traceID in packet
Mathieu Poirier:
- Add "sinks" group to PMU directory
- Use event attributes to send sink information to kernel
- Remove set_drv_config() API, no longer used.
perf annotate:
Jiri Olsa:
- Delay symbol annotation to the resort phase, speeding up 'perf report'
startup.
perf record:
Alexey Budankov:
- Allow binding userspace buffers to NUMA nodes.
Symbols:
Adrian Hunter:
- Fix calculating of symbol sizes when splitting kallsyms into
maps for kcore processing.
Vendor events:
William Cohen:
- Intel: Fix Load_Miss_Real_Latency on CLX
Misc:
Arnaldo Carvalho de Melo:
- Streamline headers, removing includes when all that is needed are
just forward declarations, fixup the fallout for cases where headers
should have been explicitely included but were instead obtained
indirectly, by sheer luck.
- Add fallback versions for CPU_{OR,EQUAL}(), so that code using it
continue to build on older systems where those were not yet introduced
or in systems using some other libc than the GNU one where those
helpers aren't present.
Documentation:
Changbin Du:
- Add documentation for BPF event selection.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXFsqugAKCRCyPKLppCJ+
JzpwAQDEh1mNZoxfdGZEi9d+8p2hnRlOs3GOUG4iGnqAYfae4QEAkMJ0V1wrmkdw
NXgV+PgWfDcgbD4Cn90eWA8M6KEcbgA=
=ogOF
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-5.1-20190206' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
Hardware tracing:
Adrian Hunter:
- Handle calls optimized into jumps to a different symbol
in the thread stack routines used to process hardware traces (Adrian Hunter)
Intel PT:
Adrian Hunter:
- Fix overlap calculation for padding.
- Fix CYC timestamp calculation after OVF.
- Packet splitting can only happen in 32-bit.
- Add timestamp to auxtrace errors.
ARM CoreSight:
Leo Yan:
- Add last instruction information in packet
- Set sample flags for instruction range, exception and
return packets and for a trace discontinuity.
- Add exception number in exception packet
- Change tuple from traceID-CPU# to traceID-metadata
- Add traceID in packet
Mathieu Poirier:
- Add "sinks" group to PMU directory
- Use event attributes to send sink information to kernel
- Remove set_drv_config() API, no longer used.
perf annotate:
Jiri Olsa:
- Delay symbol annotation to the resort phase, speeding up 'perf report'
startup.
perf record:
Alexey Budankov:
- Allow binding userspace buffers to NUMA nodes.
Symbols:
Adrian Hunter:
- Fix calculating of symbol sizes when splitting kallsyms into
maps for kcore processing.
Vendor events:
William Cohen:
- Intel: Fix Load_Miss_Real_Latency on CLX
Misc:
Arnaldo Carvalho de Melo:
- Streamline headers, removing includes when all that is needed are
just forward declarations, fixup the fallout for cases where headers
should have been explicitely included but were instead obtained
indirectly, by sheer luck.
- Add fallback versions for CPU_{OR,EQUAL}(), so that code using it
continue to build on older systems where those were not yet introduced
or in systems using some other libc than the GNU one where those
helpers aren't present.
Documentation:
Changbin Du:
- Add documentation for BPF event selection.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It needs the definitions for PATH_MAX and snprintf, was getting it
by luck from headers it included and that are now being sanitized.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-7bbh3kk0h5mywvfqm64nhv28@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Several places were using definitions found in symbols.h but not
including it, getting it by sheer luck from some other headers that now
are in the process of removing that include because they don't need it
or because simply having struct forward declarations is enough, fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-xbcvvx296d70kpg9wb0qmeq9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We're going to remove symbol.h from some places and this breaks
some of the perf tests, fix it by adding the required includes.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-wpa4b6x0btpnh2kjxzl9no4w@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Lots of places get the map.h file indirectly, and since we're going to
remove it from machine.h, then those need to include it directly, do it
now, before we remove that dep.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-ob8jehdjda8h5jsrv9dqj9tf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support both Python 2 and Python 3 in tests/attr.py
The use of "except as" syntax implies the minimum supported Python2 version is
now v2.6
Committer testing:
$ make -C tools/perf PYTHON3=python install-bin
Before:
# perf test attr
16: Setup struct perf_event_attr : FAILED!
48: Synthesize attr update : Ok
[root@quaco ~]# perf test -v attr
16: Setup struct perf_event_attr :
--- start ---
test child forked, pid 3121
File "/home/acme/libexec/perf-core/tests/attr.py", line 324
except Unsup, obj:
^
SyntaxError: invalid syntax
test child finished with -1
---- end ----
Setup struct perf_event_attr: FAILED!
48: Synthesize attr update :
--- start ---
test child forked, pid 3124
test child finished with 0
---- end ----
Synthesize attr update: Ok
#
After:
# perf test attr
16: Setup struct perf_event_attr : Ok
48: Synthesize attr update : Ok
#
Signed-off-by: Tony Jones <tonyj@suse.de>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20190124005229.16146-7-tonyj@suse.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Notice that the use of the bitwise OR operator '|' always leads to true
in this particular case, which seems a bit suspicious due to the context
in which this expression is being used.
Fix this by using bitwise AND operator '&' instead.
This bug was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Fixes: 6a6cd11d4e ("perf test: Add test for the sched tracepoint format fields")
Link: http://lkml.kernel.org/r/20190122233439.GA5868@embeddedor
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support both Python 2 and Python 3 in tests/attr.py
The use of "except as" syntax implies the minimum supported Python2 version is
now v2.6
Committer testing:
$ make -C tools/perf PYTHON3=python install-bin
Before:
# perf test attr
16: Setup struct perf_event_attr : FAILED!
48: Synthesize attr update : Ok
[root@quaco ~]# perf test -v attr
16: Setup struct perf_event_attr :
--- start ---
test child forked, pid 3121
File "/home/acme/libexec/perf-core/tests/attr.py", line 324
except Unsup, obj:
^
SyntaxError: invalid syntax
test child finished with -1
---- end ----
Setup struct perf_event_attr: FAILED!
48: Synthesize attr update :
--- start ---
test child forked, pid 3124
test child finished with 0
---- end ----
Synthesize attr update: Ok
#
After:
# perf test attr
16: Setup struct perf_event_attr : Ok
48: Synthesize attr update : Ok
#
Signed-off-by: Tony Jones <tonyj@suse.de>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20190124005229.16146-7-tonyj@suse.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
tests/attr.c invokes attr.py via an explicit invocation of Python
($PYTHON) so there is therefore no need for an explicit shebang.
Also most distros follow pep-0394 which recommends that /usr/bin/python
refer only to v2 and so may not exist on the system (if PYTHON=python3).
Signed-off-by: Tony Jones <tonyj@suse.de>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20190124005229.16146-5-tonyj@suse.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
At the cost of an extra pointer, we can avoid the O(logN) cost of
finding the first element in the tree (smallest node), which is
something heavily required for histograms. Specifically, the following
are converted to rb_root_cached, and users accordingly:
hist::entries_in_array
hist::entries_in
hist::entries
hist::entries_collapsed
hist_entry::hroot_in
hist_entry::hroot_out
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20181206191819.30182-7-dave@stgolabs.net
[ Added some missing conversions to rb_first_cached() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove duplicate headers which are included more than once in the same
file.
Signed-off-by: Brajeswar Ghosh <brajeswar.linux@gmail.com>
Acked-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Colin King <colin.king@canonical.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sabyasachi Gupta <sabyasachi.linux@gmail.com>
Link: http://lkml.kernel.org/r/20190115135916.GA3629@hp-pavilion-15-notebook-pc-brajeswar
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf on ARM requires CONFIG_KUSER_HELPERS to be turned on to allow some
independance with respect to the ARM CPU being used. Add a test which
tries to locate the [vectors] page, created when CONFIG_KUSER_HELPERS is
turned on to help asses the system's health.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lkml.kernel.org/r/20181221034337.26663-3-f.fainelli@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some kernels, like 4.19.13-300.fc29.x86_64 in fedora 29, fail with the
existing probe definition asking for the contents of result->name,
working when we ask for the 'filename' variable instead, so add a
fallback to that.
Now those tests are back working on fedora 29 systems with that kernel:
# perf test vfs_getname
65: Use vfs_getname probe to get syscall args filenames : Ok
66: Add vfs_getname probe to get syscall args filenames : Ok
67: Check open filename arg using perf trace + vfs_getname: Ok
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-klt3n0i58dfqttveti09q3fi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since the first line was used as a test identification, it needs to be
skipped by shell_test__description() function now.
Further notes from Hendrik:
It might be worth to note that adding the shebang is necessary to spot
them as scripts.
Using /bin/sh looks fine to. Just briefly checked whether the scripts
contains some bash-specifics, which is not the case.
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
LPU-Reference: 2127419430.57657104.1542836358464.JavaMail.zimbra@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The default timeout of 500ms for parsing /proc/<pid>/maps files is too
short for profiling many of our services.
This can be overridden by passing --proc-map-timeout to the relevant
command but it'd be nice to globally increase our default value.
This patch permits setting a different default with the
core.proc-map-timeout config file parameter.
Signed-off-by: Mark Drayton <mbd@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20181204203420.1683114-1-mbd@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Go over the tools/ files that are maintained in Arnaldo's tree and
fix common typos: half of them were in comments, the other half
in JSON files.
No change in functionality intended.
Committer notes:
This was split from a larger patch as there are code that is,
additionally, maintained outside the kernel tree, so to ease
cherry-picking and/or backporting, split this into multiple patches.
Just typos in comments, no need to backport, reducing the possibility of
possible backporting artifacts.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20181203102200.GA104797@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The breakpoint tests on the ARM 32-bit kernel are broken in several
ways.
The breakpoint length requested does not necessarily match whether the
function address has the Thumb bit (bit 0) set or not, and this does
matter to the ARM kernel hw_breakpoint infrastructure. See [1] for
background.
[1]: https://lkml.org/lkml/2018/11/15/205
As Will indicated, the overflow handling would require single-stepping
which is not supported at the moment. Just disable those tests for the
ARM 32-bit platforms and update the comment above to explain these
limitations.
Co-developed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20181203191138.2419-1-f.fainelli@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix inconsistent use of tabs and spaces error:
# perf test 16 -v
16: Setup struct perf_event_attr :
--- start ---
test child forked, pid 20224
File "/usr/libexec/perf-core/tests/attr.py", line 119
log.warning("expected %s=%s, got %s" % (t, self[t], other[t]))
^
TabError: inconsistent use of tabs and spaces in indentation
test child finished with -1
---- end ----
Setup struct perf_event_attr: FAILED!
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181122140456.16817-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the 'sleep' command is provided by coreutils, then the "PERF_RECORD_*
events & perf_sample fields" test will fail because the MMAP name is
'coreutils' not 'sleep', and there is an extra COMM event. Fix the test
to detect that case.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181122135545.16295-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adam reported a record command crash for simple session like:
$ perf record -e cpu-clock ls
with following backtrace:
Program received signal SIGSEGV, Segmentation fault.
3543 ev = event_update_event__new(size + 1, PERF_EVENT_UPDATE__UNIT, evsel->id[0]);
(gdb) bt
#0 perf_event__synthesize_event_update_unit
#1 0x000000000051e469 in perf_event__synthesize_extra_attr
#2 0x00000000004445cb in record__synthesize
#3 0x0000000000444bc5 in __cmd_record
...
We synthesize an update event that needs to touch the evsel id array,
which is not defined at that time. Fix this by forcing the id allocation
for events with their unit defined.
Reflecting possible read_format ID bit in the attr tests.
Reported-by: Yongxin Liu <yongxin.liu@outlook.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adam Lee <leeadamrobert@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201477
Fixes: bfd8f72c27 ("perf record: Synthesize unit/scale/... in event update")
Link: http://lkml.kernel.org/r/20181112130012.5424-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andi reported following malfunction:
# perf record -e '{ref-cycles,cycles}:S' -a sleep 1
# perf script
non matching sample_id_all
That's because we disable sample_id_all bit for non-sampling group
members. We can't do that, because it needs to be the same over the
whole event list. This patch keeps it untouched again.
Reported-by: Andi Kleen <andi@firstfloor.org>
Tested-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180923150420.27327-1-jolsa@kernel.org
Fixes: e9add8bac6 ("perf evsel: Disable write_backward for leader sampling group events")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
S390 does not support the perf_event_open system call for
attribute type PERF_TYPE_BREAKPOINT. This results in test
failure for test 22:
[root@s8360046 perf]# ./perf test 22
22: Watchpoint :
22.1: Read Only Watchpoint : FAILED!
22.2: Write Only Watchpoint : FAILED!
22.3: Read / Write Watchpoint : FAILED!
22.4: Modify Watchpoint : FAILED!
[root@s8360046 perf]#
Add s390 support to avoid these tests being executed on
s390 platform:
[root@s8360046 perf]# ./perf test 22
[root@s8360046 perf]# ./perf test -v 22
22: Watchpoint : Disabled
[root@s8360046 perf]#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180928105335.67179-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_". This renames enum format_flags
to enum tep_format_flags and adds prefix TEP_ to all of its members.
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180919185722.803127871@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_". This renames struct format to
struct tep_format and struct format_field to struct tep_format_field
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180919185722.661319373@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We don't have a 'perf test' entry available to test the watchpoint
functionality.
Add a simple set of tests:
- Read only watchpoint
- Write only watchpoint
- Read / Write watchpoint
- Runtime watchpoint modification
Ex.: on powerpc:
$ sudo perf test 22
22: Watchpoint :
22.1: Read Only Watchpoint : Ok
22.2: Write Only Watchpoint : Ok
22.3: Read / Write Watchpoint : Ok
22.4: Modify Watchpoint : Ok
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180912061229.22832-1-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we don't have the iputils-debuginfo package installed, i.e. when we
don't have the DWARF information needed to resolve ping's samples, we
end up failing this 'perf test' entry:
# perf test ping
62: probe libc's inet_pton & backtrace it with ping : Ok
# rpm -e iputils-debuginfo
# perf test ping
62: probe libc's inet_pton & backtrace it with ping : FAILED!
#
Fix it to accept "[unknown]" where the symbol + offset, when resolved,
is expected.
I think this will fail in the other arches as well, but since I can't
test now, I'm leaving s390x and ppc cases as-is.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Sandipan Das <sandipan@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 7903a70867 ("perf script: Show symbol offsets by default")
Link: https://lkml.kernel.org/n/tip-hnizqwqrs03vcq1b74yao0f6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Having comp carrying the compression ID, we no longer need return the
extension. Removing it and updating the automated test.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180817094813.15086-14-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Store a decompression ID in 'struct kmod_path', so it can be later
stored in 'struct dso'.
Switch 'struct kmod_path's 'comp' from 'bool' to 'int' to return the
compressions array index. Add 0 index item into compressions array, so
that the comp usage stays as it was: 0 - no compression, != 0
compression index.
Update the kmod_path tests.
Committer notes:
Use a designated initializer + terminating comma, e.g. { .fmt = NULL, }, to fix
the build in several distros:
centos:6: util/dso.c:201: error: missing initializer
centos:6: util/dso.c:201: error: (near initialization for 'compressions[0].decompress')
debian:9: util/dso.c:201:24: error: missing field 'decompress' initializer [-Werror,-Wmissing-field-initializers]
fedora:25: util/dso.c:201:24: error: missing field 'decompress' initializer [-Werror,-Wmissing-field-initializers]
fedora:26: util/dso.c:201:24: error: missing field 'decompress' initializer [-Werror,-Wmissing-field-initializers]
fedora:27: util/dso.c:201:24: error: missing field 'decompress' initializer [-Werror,-Wmissing-field-initializers]
oraclelinux:6: util/dso.c:201: error: missing initializer
oraclelinux:6: util/dso.c:201: error: (near initialization for 'compressions[0].decompress')
ubuntu:12.04.5: util/dso.c:201:2: error: missing initializer [-Werror=missing-field-initializers]
ubuntu:12.04.5: util/dso.c:201:2: error: (near initialization for 'compressions[0].decompress') [-Werror=missing-field-initializers]
ubuntu:16.04: util/dso.c:201:24: error: missing field 'decompress' initializer [-Werror,-Wmissing-field-initializers]
ubuntu:16.10: util/dso.c:201:24: error: missing field 'decompress' initializer [-Werror,-Wmissing-field-initializers]
ubuntu:16.10: util/dso.c:201:24: error: missing field 'decompress' initializer [-Werror,-Wmissing-field-initializers]
ubuntu:17.10: util/dso.c:201:24: error: missing field 'decompress' initializer [-Werror,-Wmissing-field-initializers]
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180817094813.15086-7-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no need to call dso__needs_decompress() twice in the function.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180817094813.15086-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
bitmap_zero() is called after bitmap_alloc() in perf code. But
bitmap_alloc() internally uses calloc() which guarantees that allocated
area is zeroed. So following bitmap_zero is unneeded. Drop it.
This happened because of confusing name for bitmap allocator. It
should has name bitmap_zalloc instead of bitmap_alloc.
This series:
https://lkml.org/lkml/2018/6/18/841
introduces a new API for bitmap allocations in kernel, and functions
there are named correctly. Following patch propogates the API to tools,
and fixes naming issue.
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andriy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Link: http://lkml.kernel.org/r/20180623073502.16321-1-ynorov@caviumnetworks.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Recently, the subtest numbering was changed to start from 1. While it
is fine for displaying results, this should not be the case when the
subtests are actually invoked.
Typically, the subtests are stored in zero-indexed arrays and invoked
based on the index passed to the main test function. Since the index
now starts from 1, the second subtest in the array (index 1) gets
invoked instead of the first (index 0). This applies to all of the
following subtests but for the last one, the subtest always fails
because it does not meet the boundary condition of the subtest index
being lesser than the number of subtests.
This can be observed on powerpc64 and x86_64 systems running Fedora 28
as shown below.
Before:
# perf test "builtin clang support"
55: builtin clang support :
55.1: builtin clang compile C source to IR : Ok
55.2: builtin clang compile C source to ELF object : FAILED!
# perf test "LLVM search and compile"
38: LLVM search and compile :
38.1: Basic BPF llvm compile : Ok
38.2: kbuild searching : Ok
38.3: Compile source for BPF prologue generation : Ok
38.4: Compile source for BPF relocation : FAILED!
# perf test "BPF filter"
40: BPF filter :
40.1: Basic BPF filtering : Ok
40.2: BPF pinning : Ok
40.3: BPF prologue generation : Ok
40.4: BPF relocation checker : FAILED!
After:
# perf test "builtin clang support"
55: builtin clang support :
55.1: builtin clang compile C source to IR : Ok
55.2: builtin clang compile C source to ELF object : Ok
# perf test "LLVM search and compile"
38: LLVM search and compile :
38.1: Basic BPF llvm compile : Ok
38.2: kbuild searching : Ok
38.3: Compile source for BPF prologue generation : Ok
38.4: Compile source for BPF relocation : Ok
# perf test "BPF filter"
40: BPF filter :
40.1: Basic BPF filtering : Ok
40.2: BPF pinning : Ok
40.3: BPF prologue generation : Ok
40.4: BPF relocation checker : Ok
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Fixes: 9ef0112442 ("perf test: Fix subtest number when showing results")
Link: http://lkml.kernel.org/r/20180726171733.33208-1-sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'umask' event parameter is unsupported on some architectures like
powerpc64.
This can be observed on a powerpc64le system running Fedora 27 as shown
below.
# perf test "Parse event definition strings" -v
6: Parse event definition strings :
--- start ---
test child forked, pid 45915
...
running test 3 'cpu/name='COMPLEX_CYCLES_NAME:orig=cycles,desc=chip-clock-ticks',period=0x1,event=0x2,umask=0x3/ukp'Invalid event/parameter 'umask'
Invalid event/parameter 'umask'
failed to parse event 'cpu/name='COMPLEX_CYCLES_NAME:orig=cycles,desc=chip-clock-ticks',period=0x1,event=0x2,umask=0x3/ukp', err 1, str 'unknown term'
event syntax error: '..,event=0x2,umask=0x3/ukp'
\___ unknown term
valid terms: event,mark,pmc,cache_sel,pmcxsel,unit,thresh_stop,thresh_start,combine,thresh_sel,thresh_cmp,sample_mode,config,config1,config2,name,period,freq,branch_type,time,call-graph,stack-size,no-inherit,inherit,max-stack,no-overwrite,overwrite,driver-config
mem_access -> cpu/event=0x10401e0/
running test 0 'config=10,config1,config2=3,umask=1'
test child finished with 1
---- end ----
Parse event definition strings: FAILED!
Committer testing:
After applying the patch these test passes and in verbose mode we get:
# perf test -v "event definition"
6: Parse event definition strings:
--- start ---
test child forked, pid 11061
running test 0 'syscalls:sys_enter_openat'Using CPUID GenuineIntel-6-9E
<SNIP>
running test 53 'cycles/name='COMPLEX_CYCLES_NAME:orig=cycles,desc=chip-clock-ticks'/Duk'
running test 0 'cpu/config=10,config1,config2=3,period=1000/u'
running test 1 'cpu/config=1,name=krava/u,cpu/config=2/u'
running test 2 'cpu/config=1,call-graph=fp,time,period=100000/,cpu/config=2,call-graph=no,time=0,period=2000/'
running test 3 'cpu/name='COMPLEX_CYCLES_NAME:orig=cycles,desc=chip-clock-ticks',period=0x1,event=0x2/ukp'
<SNIP>
test child finished with 0
---- end ----
Parse event definition strings: Ok
#
Suggested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Fixes: 06dc5bf21f ("perf tests: Check that complex event name is parsed correctly")
Link: http://lkml.kernel.org/r/20180726105502.31670-1-sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf test 40 for example has several subtests numbered 1-4 when
displaying the start of the subtest. When the subtest results
are displayed the subtests are numbered 0-3.
Use this command to generate trace output:
[root@s35lp76 perf]# ./perf test -Fv 40 2>/tmp/bpf1
Fix this by adjusting the subtest number when show the
subtest result.
Output before:
[root@s35lp76 perf]# egrep '(^40\.[0-4]| subtest [0-4]:)' /tmp/bpf1
40.1: Basic BPF filtering :
BPF filter subtest 0: Ok
40.2: BPF pinning :
BPF filter subtest 1: Ok
40.3: BPF prologue generation :
BPF filter subtest 2: Ok
40.4: BPF relocation checker :
BPF filter subtest 3: Ok
[root@s35lp76 perf]#
Output after:
root@s35lp76 ~]# egrep '(^40\.[0-4]| subtest [0-4]:)' /tmp/bpf1
40.1: Basic BPF filtering :
BPF filter subtest 1: Ok
40.2: BPF pinning :
BPF filter subtest 2: Ok
40.3: BPF prologue generation :
BPF filter subtest 3: Ok
40.4: BPF relocation checker :
BPF filter subtest 4: Ok
[root@s35lp76 ~]#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180724134858.100644-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the event 'probe_libc:inet_pton' already exists, this test fails and
deletes the existing event before exiting. This will then pass for any
subsequent executions.
Instead of skipping to deleting the existing event because of failing to
add a new event, a duplicate event is now created and the script
continues with the usual checks. Only the new duplicate event that is
created at the beginning of the test is deleted as a part of the
cleanups in the end. All existing events remain as it is.
This can be observed on a powerpc64 system running Fedora 27 as shown
below.
# perf probe -x /usr/lib64/power8/libc-2.26.so -a inet_pton
Added new event:
probe_libc:inet_pton (on inet_pton in /usr/lib64/power8/libc-2.26.so)
Before:
# perf test -v "probe libc's inet_pton & backtrace it with ping"
62: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 21302
test child finished with -1
---- end ----
probe libc's inet_pton & backtrace it with ping: FAILED!
# perf probe --list
After:
# perf test -v "probe libc's inet_pton & backtrace it with ping"
62: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 21490
ping 21513 [035] 39357.565561: probe_libc:inet_pton_1: (7fffa4c623b0)
7fffa4c623b0 __GI___inet_pton+0x0 (/usr/lib64/power8/libc-2.26.so)
7fffa4c190dc gaih_inet.constprop.7+0xf4c (/usr/lib64/power8/libc-2.26.so)
7fffa4c19c4c getaddrinfo+0x15c (/usr/lib64/power8/libc-2.26.so)
111d93c20 main+0x3e0 (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
# perf probe --list
probe_libc:inet_pton (on __inet_pton@resolv/inet_pton.c in /usr/lib64/power8/libc-2.26.so)
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/e11fecff96e6cf4c65cdbd9012463513d7b8356c.1530724939.git.sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If there is a mismatch in the perf script output, this test fails and
exits before the event and temporary files created during its execution
are cleaned up.
This can be observed on a powerpc64 system running Fedora 27 as shown
below.
# perf test -v "probe libc's inet_pton & backtrace it with ping"
62: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 18655
ping 18674 [013] 24511.496995: probe_libc:inet_pton: (7fffa6b423b0)
7fffa6b423b0 __GI___inet_pton+0x0 (/usr/lib64/power8/libc-2.26.so)
7fffa6af90dc gaih_inet.constprop.7+0xf4c (/usr/lib64/power8/libc-2.26.so)
FAIL: expected backtrace entry "getaddrinfo\+0x[[:xdigit:]]+[[:space:]]\(/usr/lib64/power8/libc-2.26.so\)$" got "7fffa6af90dc gaih_inet.constprop.7+0xf4c (/usr/lib64/power8/libc-2.26.so)"
test child finished with -1
---- end ----
probe libc's inet_pton & backtrace it with ping: FAILED!
# ls /tmp/expected.* /tmp/perf.data.* /tmp/perf.script.*
/tmp/expected.u31 /tmp/perf.data.Pki /tmp/perf.script.Bhs
# perf probe --list
probe_libc:inet_pton (on __inet_pton@resolv/inet_pton.c in /usr/lib64/power8/libc-2.26.so)
Cleanup of the event and the temporary files are now ensured by allowing
the cleanup code to be executed even if the lines from the backtrace do
not match their expected patterns instead of simply exiting from the
point of failure.
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/ce9fb091dd3028fba8749a1a267cfbcb264bbfb1.1530724939.git.sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For powerpc64, this test currently fails due to a mismatch in the
expected output.
This can be observed on a powerpc64le system running Fedora 27 as shown
below.
# perf test -v "probe libc's inet_pton & backtrace it with ping"
Before:
62: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 23948
ping 23965 [003] 71136.075084: probe_libc:inet_pton: (7fff996aaf28)
7fff996aaf28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so)
7fff9965fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so)
FAIL: expected backtrace entry 2 "getaddrinfo\+0x[[:xdigit:]]+[[:space:]]\(/usr/lib64/libc-2.26.so\)$" got "7fff9965fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so)"
test child finished with -1
---- end ----
probe libc's inet_pton & backtrace it with ping: FAILED!
After:
62: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 24638
ping 24655 [001] 71208.525396: probe_libc:inet_pton: (7fffa245af28)
7fffa245af28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so)
7fffa240fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so)
7fffa24105b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so)
138d52d70 main+0x3e0 (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Maynard Johnson <maynard@us.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Fixes: e07d585e2454 ("perf tests: Switch trace+probe_libc_inet_pton to use record")
Link: http://lkml.kernel.org/r/49621ec5f37109f0655e5a8c32287ad68d85a1e5.1530724939.git.sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allows a perf shell test developer to concurrently edit and run their
test scripts, avoiding perf test attempts to execute their editor
temporary files, such as seen here:
$ sudo taskset -c 0 ./perf test -vvvvvvvv -F 63
63: 0VIM 8.0 :
--- start ---
sh: 1: ./tests/shell/.record+probe_libc_inet_pton.sh.swp: Permission denied
---- end ----
0VIM 8.0: FAILED!
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20180629124658.15a506b41fc4539c08eb9426@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Debian based systems such as Ubuntu have dash as their default shell.
Even if the normal or root user's shell is bash, certain scripts still
call /bin/sh, which points to dash, so we fix this perf test by
rewriting it in a more portable way.
BEFORE:
$ sudo perf test -v 64
64: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 31942
./tests/shell/record+probe_libc_inet_pton.sh: 18: ./tests/shell/record+probe_libc_inet_pton.sh: expected[0]=ping[][0-9 \.:]+probe_libc:inet_pton: \([[:xdigit:]]+\): not found
./tests/shell/record+probe_libc_inet_pton.sh: 19: ./tests/shell/record+probe_libc_inet_pton.sh: expected[1]=.*inet_pton\+0x[[:xdigit:]]+[[:space:]]\(/lib/x86_64-linux-gnu/libc-2.27.so|inlined\)$: not found
./tests/shell/record+probe_libc_inet_pton.sh: 29: ./tests/shell/record+probe_libc_inet_pton.sh: expected[2]=getaddrinfo\+0x[[:xdigit:]]+[[:space:]]\(/lib/x86_64-linux-gnu/libc-2.27.so\)$: not found
./tests/shell/record+probe_libc_inet_pton.sh: 30: ./tests/shell/record+probe_libc_inet_pton.sh: expected[3]=.*\+0x[[:xdigit:]]+[[:space:]]\(.*/bin/ping.*\)$: not found
ping 31963 [004] 83577.670613: probe_libc:inet_pton: (7fe15f87f4b0)
./tests/shell/record+probe_libc_inet_pton.sh: 39: ./tests/shell/record+probe_libc_inet_pton.sh: Bad substitution
./tests/shell/record+probe_libc_inet_pton.sh: 41: ./tests/shell/record+probe_libc_inet_pton.sh: Bad substitution
test child finished with -2
---- end ----
probe libc's inet_pton & backtrace it with ping: Skip
AFTER:
$ sudo perf test -v 64
64: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 32277
ping 32295 [001] 83679.690020: probe_libc:inet_pton: (7ff244f504b0)
7ff244f504b0 __GI___inet_pton+0x0 (/lib/x86_64-linux-gnu/libc-2.27.so)
7ff244f14ce4 getaddrinfo+0x124 (/lib/x86_64-linux-gnu/libc-2.27.so)
556ac036b57d _init+0xb75 (/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20180629124643.2089b3ce59960eba34e87b27@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since we do not specify bash (and/or zsh) as a requirement, use the
standard error redirection that is more widely supported.
BEFORE:
$ sudo perf test -v 62
62: Check open filename arg using perf trace + vfs_getname:
--- start ---
test child forked, pid 27305
./tests/shell/trace+probe_vfs_getname.sh: 20: ./tests/shell/trace+probe_vfs_getname.sh: Syntax error: "&" unexpected
test child finished with -2
---- end ----
Check open filename arg using perf trace + vfs_getname: Skip
AFTER:
$ sudo perf test -v 62
64: Check open filename arg using perf trace + vfs_getname :
--- start ---
test child forked, pid 23008
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=result->name:string)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_getname -aR sleep 1
0.361 ( 0.008 ms): touch/23032 openat(dfd: CWD, filename: /tmp/temporary_file.VEh0n, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 4
test child finished with 0
---- end ----
Check open filename arg using perf trace + vfs_getname: Ok
Similar to commit 35435cd060, with the same title.
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20180629124633.0a9f4bea54b8d2c28f265de2@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding optional 'valid' callback for events tests in parse-events
object, so we don't try to parse PMUs, which are not supported.
Following line is displayed for skipped test:
running test 52 'intel_pt//u'... SKIP
Committer note:
Use named initializers in the struct evlist_test variable to avoid
breaking the build on centos:5, 6 and others with a similar gcc:
cc1: warnings being treated as errors
tests/parse-events.c: In function 'test_pmu_events':
tests/parse-events.c:1817: error: missing initializer
tests/parse-events.c:1817: error: (near initialization for 'e.type')
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180611093422.1005-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add missing error handling for parse_events calls in test_event function
that led to following segfault on s390:
running test 52 'intel_pt//u'
perf: Segmentation fault
...
/lib64/libc.so.6(vasprintf+0xe6) [0x3fffca3f106]
/lib64/libc.so.6(asprintf+0x46) [0x3fffca1aa96]
./perf(parse_events_add_pmu+0xb8) [0x80132088]
./perf(parse_events_parse+0xc62) [0x8019529a]
./perf(parse_events+0x98) [0x801341c0]
./perf(test__parse_events+0x48) [0x800cd140]
./perf(cmd_test+0x26a) [0x800bd44a]
test child interrupted
Adding the struct parse_events_error argument to parse_events call. Also
adding parse_events_print_error to get more details on the parsing
failures, like:
# perf test 6 -v
running test 52 'intel_pt//u'failed to parse event 'intel_pt//u', err 1, str 'Cannot find PMU `intel_pt'. Missing kernel support?'
event syntax error: 'intel_pt//u'
\___ Cannot find PMU `intel_pt'. Missing kernel support?
Committer note:
Use named initializers in the struct parse_events_error variable to
avoid breaking the build on centos5, 6 and others with a similar gcc:
cc1: warnings being treated as errors
tests/parse-events.c: In function 'test_event':
tests/parse-events.c:1696: error: missing initializer
tests/parse-events.c:1696: error: (near initialization for 'err.str')
Reported-by: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kim Phillips <kim.phillips@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180611093422.1005-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On s390 this test case fails because the socket identifiction numbers
assigned to the CPU are higher than the CPU identification numbers.
F/ix this by adding the platform architecture into the perf data header
flag information. This helps identifiing the test platform and handles
s390 specifics in process_cpu_topology().
Before:
[root@p23lp27 perf]# perf test -vvvvv -F 39
39: Session topology :
--- start ---
templ file: /tmp/perf-test-iUv755
socket_id number is too big.You may need to upgrade the perf tool.
---- end ----
Session topology: Skip
[root@p23lp27 perf]#
After:
[root@p23lp27 perf]# perf test -vvvvv -F 39
39: Session topology :
--- start ---
templ file: /tmp/perf-test-8X8VTs
CPU 0, core 0, socket 6
CPU 1, core 1, socket 3
---- end ----
Session topology: Ok
[root@p23lp27 perf]#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Fixes: c84974ed9f ("perf test: Add entry to test cpu topology")
Link: http://lkml.kernel.org/r/20180611073153.15592-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian reported that this test fails in his system where:
probe libc's inet_pton & backtrace it with ping: FAILED!
root@kbl04:~/git/linux-perf# nm -g /lib/x86_64-linux-gnu/libc-2.19.so | grep inet_pton
nm: /lib/x86_64-linux-gnu/libc-2.19.so: no symbols
This fails on ubuntu systems, with Adrian's being kubuntu 14.04, I
tested with ubuntu 14.04.4 and 18.04, and there we need to use the
-D/--dynamic 'nm' option to have this test working. And it works as well
with that on fedora 27, so use it.
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Sandipan Das <sandipan@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-zlfnbauad3ljlmtjgo0v660u@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The "Object code reading" test will not create maps for the PTI entry
trampolines unless the machine environment exists to show that the arch is
x86_64.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1528183800-21577-1-git-send-email-adrian.hunter@intel.com
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add tests for vdso32 and vdsox32. This will cause the overall test to
fail because __kmod_path__parse() does not handle vdso32 or vdsox32.
Fixes: 1f121b03d0 ("perf tools: Deal with kernel module names in '[]' correctly")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1528117014-30032-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Its common to have the (evsel->attr.sample_type & PERF_SAMPLE_CALLCHAIN),
so add an evsel__has_callchain(evsel) helper.
This will actually get more uses as we check that instead of
symbol_conf.use_callchain in places where that produces the same result
but makes this decision to be more fine grained, per evsel.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-145340oytbthatpfeaq1do18@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the header file util/debug.h instead of declaration of verbose
variable.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180528134817.36643-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The "perf test Session topology" entry fails with core dump on s390. The root
cause is a NULL pointer dereference in function check_cpu_topology() line 76
(or line 82 without -v).
The session->header.env.cpu variable is NULL because on s390 function
process_cpu_topology() returns with error:
socket_id number is too big.
You may need to upgrade the perf tool.
and releases the env.cpu variable via zfree() and sets it to NULL.
Here is the gdb output:
(gdb) n
76 pr_debug("CPU %d, core %d, socket %d\n", i,
(gdb) n
Program received signal SIGSEGV, Segmentation fault.
0x00000000010f4d9e in check_cpu_topology (path=0x3ffffffd6c8
"/tmp/perf-test-J6CHMa", map=0x14a1740) at tests/topology.c:76
76 pr_debug("CPU %d, core %d, socket %d\n", i,
(gdb)
Make sure the env.cpu variable is not used when its NULL.
Test for NULL pointer and return TEST_SKIP if so.
Output before:
[root@p23lp27 perf]# ./perf test -F 39
39: Session topology :Segmentation fault (core dumped)
[root@p23lp27 perf]#
Output after:
[root@p23lp27 perf]# ./perf test -vF 39
39: Session topology :
--- start ---
templ file: /tmp/perf-test-Ajx59D
socket_id number is too big.You may need to upgrade the perf tool.
---- end ----
Session topology: Skip
[root@p23lp27 perf]#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180528073657.11743-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since the ip shown for a symbol is now always a virtual address, it
becomes difficult to correlate this with objdump output and determine
the exact instruction address. So, we always show the offset from the
start of the symbol.
This can be verified on a powerpc64le system running Fedora 27 as
follows:
# perf probe -a sys_write
# perf record -e probe:sys_write -g ~/test
Before applying this patch:
# perf script
test 9710 [013] 95614.332431: probe:sys_write: (c0000000004025b0)
c0000000004025b0 sys_write (/lib/modules/4.17.0-rc4+/build/vmlinux)
c00000000000b9e0 system_call (/lib/modules/4.17.0-rc4+/build/vmlinux)
7fffb70d8234 __GI___libc_write (/usr/lib64/libc-2.26.so)
7fffb7052c74 _IO_file_write@@GLIBC_2.17 (/usr/lib64/libc-2.26.so)
5afc1818 [unknown] ([unknown])
7fffb7051a60 new_do_write (/usr/lib64/libc-2.26.so)
7fffb7054638 _IO_do_write@@GLIBC_2.17 (/usr/lib64/libc-2.26.so)
7fffb7054bbc _IO_file_overflow@@GLIBC_2.17 (/usr/lib64/libc-2.26.so)
7fffb7055a24 __overflow (/usr/lib64/libc-2.26.so)
7fffb7044548 _IO_puts (/usr/lib64/libc-2.26.so)
10000440 main (/home/sandipan/test)
7fffb6fe36a0 generic_start_main.isra.0 (/usr/lib64/libc-2.26.so)
7fffb6fe3898 __libc_start_main (/usr/lib64/libc-2.26.so)
0 [unknown] ([unknown])
...
After applying this patch:
# perf script
test 9710 [013] 95614.332431: probe:sys_write: (c0000000004025b0)
c0000000004025b0 sys_write+0x10 (/lib/modules/4.17.0-rc4+/build/vmlinux)
c00000000000b9e0 system_call+0x58 (/lib/modules/4.17.0-rc4+/build/vmlinux)
7fffb70d8234 __GI___libc_write+0x24 (/usr/lib64/libc-2.26.so)
7fffb7052c74 _IO_file_write@@GLIBC_2.17+0x44 (/usr/lib64/libc-2.26.so)
5afc1818 [unknown] ([unknown])
7fffb7051a60 new_do_write+0x90 (/usr/lib64/libc-2.26.so)
7fffb7054638 _IO_do_write@@GLIBC_2.17+0x38 (/usr/lib64/libc-2.26.so)
7fffb7054bbc _IO_file_overflow@@GLIBC_2.17+0x14c (/usr/lib64/libc-2.26.so)
7fffb7055a24 __overflow+0x64 (/usr/lib64/libc-2.26.so)
7fffb7044548 _IO_puts+0x218 (/usr/lib64/libc-2.26.so)
10000440 main+0x20 (/home/sandipan/test)
7fffb6fe36a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so)
7fffb6fe3898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so)
0 [unknown] ([unknown])
...
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180517063326.6319-2-sandipan@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That takes care of using the right call to get the tracing_path
directory, the one that will end up calling tracing_path_set() to figure
out where tracefs is mounted.
One more step in doing just lazy reading of system structures to reduce
the number of operations done unconditionaly at 'perf' start.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-42zzi0f274909bg9mxzl81bu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of accessing the trace_events_path variable directly, that may
not have been properly initialized wrt detecting where tracefs is
mounted.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-id7hzn1ydgkxbumeve5wapqz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To avoid regressions such as the one fixed by 4a35a9027f ("Revert
"perf pmu: Fix pmu events parsing rule""), where '-e intel_pt//u' got
broken, with this new entry in this 'perf tests' subtest, we would have
caught it before pushing upstream.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-kw62fys9bwdgsp722so2ln1l@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf test "probe libc's inet_pton & backtrace it with ping" fails on
4.17.0rc3 on s/390. It turned out that function __inet_pton is reported
as inline:
[root@s8360047 perf]# ./perf script -i /tmp/perf.data.111
ping 12457 [000] 1584.478959: probe_libc:inet_pton: (3ffb5a347e8)
1347e8 __inet_pton (inlined)
f19d7 gaih_inet.constprop.5 (/usr/lib64/libc-2.24.so)
f4c3f __GI_getaddrinfo (inlined)
410b main (/usr/bin/ping)
Allow __inet_pton listed as inline.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180503065837.71043-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since we do not have split symtabs anymore, no need to have explicit
find_kernel_function variants, use the find_kernel_symbol ones.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-hiw2ryflju000f6wl62128it@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove the split of symbol tables for data (MAP__VARIABLE) and for
functions (MAP__FUNCTION), its unneeded and there were various places
doing two lookups to find a symbol, so simplify this.
We still will consider only the symbols that matched the filters in
place, i.e. see the (elf_(sec,sym)|symbol_type)__filter() routines in
the patch, just so that we consider only the same symbols as before,
to reduce the possibility of regressions.
All the tests on 50-something build environments, in varios versions
of lots of distros and cross build environments were performed without
build regressions, as usual with all pull requests the other tests were
also performed: 'perf test' and 'make -C tools/perf build-test'.
Also this was done at a great granularity so that regressions can be
bisected more easily.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-hiq0fy2rsleupnqqwuojo1ne@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is code that needs to see if a resolved address is a function, so,
since we're going to ditch the MAP__{FUNCTION,VARIABLE} split, store
that info in the per symbol struct.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-9ugwxz0i8ryg5702rx8u5q6z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Removing the map_type, that is going away.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-18iiiw25r75xn7zlppjldk48@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We had this much shorter map__for_each_symbol() helper for ages, use it
and kill one more map_type use outside the code, in the tools.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-iswqjy1elghc5jjvr0nds3nc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We had this for ages, IIRC for 'perf probe' use initially, so use them
instead of the variants that pass the map_type, that is going away.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-x1jpogsvj822sh0q8leiaoep@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since it uses machine__kernel_map() and this function always returns the
MAP__FUNCTION map, it doesn't make sense to call it with MAP__VARIABLE.
And also this is a step in the direction of nuking the MAP__{FUNCTION,VARIABLE}
split.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-0h3eof3kx3kq32ixg5fquf3p@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So far the only use is for MAP__FUNCTION, and since we're going to
remove that split, remove the map_type argument in machine__load_kallsyms().
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-5dhgh7x8g9hx5hpxlp3k08jp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That returns the a data structure contained the ordered list of kernel
modules + the main kernel maps, one more step in removing the
MAP__{FUNCTION,VARIABLE} split.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-qsgbxfyaohc80c9ma049dubm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Another step in the road to elliminate the MAP_{FUNCTION,VARIABLE}
separation, reducing the exposure to these details in the tools using
the symbol APIs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-8a1hvrqe3r5i0kw865u3uxwt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It was returning the searched map just on the addr_location passed, with
the function itself returning void.
Make it return the map so that we can make the code more compact.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-tzlrrzdeoof4i6ktyqv1t6ks@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The output of perf test and perf test list differ because perf test list
does not display subtests. Correct this behavior and also let perf test
list report subtests.
For example:
$ ./perf test 2>&1 |wc -l
65
Without this commit:
$ ./perf test list 2>&1 |wc -l
57
With this commit:
$ ./perf test list 2>&1 |wc -l
65
Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: linux-s390@vger.kernel.org
LPU-Reference: 1523605343-11970-1-git-send-email-brueckner@linux.ibm.com
Link: https://lkml.kernel.org/n/tip-efb74jw7x2xs2bucp5hf4ilu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Out of thread__find_add_map(..., MAP__FUNCTION, ...), idea here is to
continue removing references to MAP__{FUNCTION,VARIABLE} ahead of
getting both types of symbols in the same rbtree, as various places do
two lookups, looking first at MAP__FUNCTION, then at MAP__VARIABLE.
So thread__find_map() will eventually do just that, and 'struct symbol'
will have the symbol type, for code that cares about that.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-q27xee34l4izpfau49w103s6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
.. and other related fields that do not need to be enabled
for events that have sampling leader.
It fixes the perf top usage Ingo reported broken:
# perf top -e '{cycles,msr/aperf/}:S'
The 'msr/aperf/' event is configured for write_back sampling, which is
not allowed by the MSR PMU, so it fails to create the event.
Adjusting related attr test.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180423090823.32309-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf test case 58 (record+probe_libc_inet_pton.sh) executed on s390x
using kernel 4.16.0rc3 displays this result:
# perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
probe_libc:inet_pton: (3ffa0240448)
__GI___inet_pton (/usr/lib64/libc-2.26.so)
gaih_inet (inlined)
__GI_getaddrinfo (inlined)
main (/usr/bin/ping)
__libc_start_main (/usr/lib64/libc-2.26.so)
_start (/usr/bin/ping)
After I installed kernel 4.16.0 the same tests uses commands:
# perf record -e probe_libc:inet_pton/call-graph=dwarf/
-o /tmp/perf.data.abc ping -6 -c 1 ::1
# perf script -i /tmp/perf.data.abc
and displays:
ping 39048 [006] 84230.381198: probe_libc:inet_pton: (3ffa0240448)
140448 __GI___inet_pton (/usr/lib64/libc-2.26.so)
fbde1 gaih_inet (inlined)
fe2b9 __GI_getaddrinfo (inlined)
398d main (/usr/bin/ping)
Nothing else changed including glibc elfutils and other libraries picked
up by the build.
The entries for __libc_start_main and _start are missing.
I bisected missing __libc_start_main and _start to commit
Fixes: 3d20c62466 ("perf unwind: Unwind with libdw doesn't take symfs into account")
When I undo this commit I get this call stack on s390:
[root@s35lp76 perf]# ./perf script -i /tmp/perf.data.abc
ping 39048 [006] 84230.381198: probe_libc:inet_pton: (3ffa0240448)
140448 __GI___inet_pton (/usr/lib64/libc-2.26.so)
fbde1 gaih_inet (inlined)
fe2b9 __GI_getaddrinfo (inlined)
398d main (/usr/bin/ping)
22fbd __libc_start_main (/usr/lib64/libc-2.26.so)
457b _start (/usr/bin/ping)
Looks like dwarf functions dwfl_xxx create different call back stack
trace when using file /usr/lib/debug/usr/bin/ping-20161105-7.fc27.s390x.debug
instead of file /usr/bin/ping.
Fix this test case on s390 and do not expect any call back stack entry
after the main() function. Also be more robust and accept a leading
__GI_ prefix in front of getaddrinfo.
On x86 this test case shows the same call stack using both kernel
versions 4.16.0rc3 and 4.16.0 and also stops at main:
[root@f27 perf]# ./perf script -i /tmp/perf.data.tmr
ping 4446 [000] 172.027088: probe_libc:inet_pton: (7fdfa08c93c0)
1393c0 __GI___inet_pton (/usr/lib64/libc-2.26.so)
fe60d getaddrinfo (/usr/lib64/libc-2.26.so)
2f40 main (/usr/bin/ping)
[root@f27 perf]#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Martin Vuille <jpmv27@aim.com>
Link: http://lkml.kernel.org/r/20180423082428.7930-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since e145242ea0 ("syscalls/core, syscalls/x86: Clean up syscall stub
naming convention") changed the main syscall function for 'epoll_pwait'
to something other than the expected 'SyS_epoll_pwait the' 'perf test
BPF' entries started failing, fix it by using something called from the
main syscall function instead, 'epoll_wait', which should keep this test
working in older kernels too.
Before:
# perf test BPF
40: BPF filter :
40.1: Basic BPF filtering : FAILED!
40.2: BPF pinning : Skip
40.3: BPF prologue generation : Skip
40.4: BPF relocation checker : Skip
If we use -v for that test we see the problem:
Probe point 'SyS_epoll_pwait' not found.
After:
# perf test BPF
40: BPF filter :
40.1: Basic BPF filtering : Ok
40.2: BPF pinning : Ok
40.3: BPF prologue generation : Ok
40.4: BPF relocation checker : Ok
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/r/tip-y24nmn70cs2am8jh4i344dng@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the 'perf test "mmap interface"' we try creating events for several
tracepoints, but when perf_evsel__new() fails we're not showing which
one is failing, fix that to help diagnosing problems, such as the
syscall tracepoints ones being found and fixes in this merge window.
Now the failing tests shows:
# perf test -v "mmap interface"
4: Read samples using the mmap interface :
--- start ---
test child forked, pid 14311
<SNIP>
perf_evsel__new(sys_enter_getppid)
test child finished with -1
---- end ----
Read samples using the mmap interface: FAILED!
#
Now to check why the syscalls:sys_enter_getppid is failing...
# ls -la /sys/kernel/debug/tracing/events/syscalls/sys_enter_getppid
ls: cannot access '/sys/kernel/debug/tracing/events/syscalls/sys_enter_getppid': No such file or directory
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-44xk0ycdzrfzx1o9rklf5itl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We disable this test as instruction breakpoints (HW_BREAKPOINT_X) are
not available for powerpc.
Before applying patch:
21: Breakpoint accounting :
--- start ---
test child forked, pid 3635
failed opening event 0
failed opening event 0
watchpoints count 1, breakpoints count 0, has_ioctl 1, share 0
test child finished with -2
---- end ----
Breakpoint accounting: Skip
After applying patch:
21: Breakpoint accounting : Disabled
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20180412162140.2992-1-sandipan@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The bpf-script-test-kbuild.c script, used in one of the LLVM subtests,
includes ptrace.h unnecessarily, and that ends up making it include a
header that uses asm(_ASM_SP), a feature that is not supported by clang
<= 4.0, breaking that 'perf test' entry.
This ended up leading to the ca26cffa4e ("x86/asm: Allow again using
asm.h when building for the 'bpf' clang target"), adding an ifndef
__BPF__ to the arch/x86/include/asm/asm.h file.
Newer clang versions accept that asm(_ASM_SP) construct, so just remove
the ptrace.h include, which paves the way for reverting ca26cffa4e
("x86/asm: Allow again using asm.h when building for the 'bpf' clang
target").
Suggested-by: Yonghong Song <yhs@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lkml.kernel.org/r/613f0a0d-c433-8f4d-dcc1-c9889deae39e@fb.com
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-clbcnzbakdp18ibme4wt43ib@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With gcc 8 we get new set of snprintf() warnings that breaks the
compilation, one example:
tests/mem.c: In function ‘check’:
tests/mem.c:19:48: error: ‘%s’ directive output may be truncated writing \
up to 99 bytes into a region of size 89 [-Werror=format-truncation=]
snprintf(failure, sizeof failure, "unexpected %s", out);
The gcc docs says:
To avoid the warning either use a bigger buffer or handle the
function's return value which indicates whether or not its output
has been truncated.
Given that all these warnings are harmless, because the code either
properly fails due to uncomplete file path or we don't care for
truncated output at all, I'm changing all those snprintf() calls to
scnprintf(), which actually 'checks' for the snprint return value so the
gcc stays silent.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Link: http://lkml.kernel.org/r/20180319082902.4518-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently when cnt is 100 an array bounds overflow occurs on the
assignment of fd[cnt]. Fix this by performing the bounds check on cnt
before writing to fd.
Detected by cppcheck:
tools/perf/tests/bp_account.c:115: (warning) Either the condition
'cnt==100' is redundant or the array 'fd[100]' is accessed at index 100,
which is out of bounds.
Signed-off-by: Colin King <colin.king@canonical.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Fixes: 032db28e5f ("perf tests: Add breakpoint accounting/modify test")
Link: http://lkml.kernel.org/r/20180314173354.11250-1-colin.king@canonical.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This fixes record+probe_libc_inet_pton.sh from always exiting with code
0 and making the test pass even if the perf script output does not match
the expected pattern.
The issue can be observed if this test is run with the verbose flags as
shown below:
60: probe libc's inet_pton & backtrace it with ping :
...
ping 19602 [006] 16988.413767: probe_libc:inet_pton: (7fff9a2c42e8)
1842e8 __GI___inet_pton (/usr/lib64/libc-2.26.so)
130db4 getaddrinfo (/usr/lib64/libc-2.26.so)
FAIL: expected backtrace entry 3 ".*\(.*/bin/ping.*\)$" got ""
test child finished with 0
...
probe libc's inet_pton & backtrace it with ping: Ok
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Fixes: e07d585e2454 ("perf tests: Switch trace+probe_libc_inet_pton to use record")
Link: http://lkml.kernel.org/r/20180312124450.30371-1-sandipan@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding mem2node object automated test.
The test prepares few artificial nodes - memory maps and verifies the
mem2node object returns proper node values to given addresses.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180309101442.9224-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding test that:
- detects the number of watch/break-points,
skip test if any is missing
- detects PERF_EVENT_IOC_MODIFY_ATTRIBUTES ioctl,
skip test if it's missing
- detects if watchpoints and breakpoints share
same slots
- create all possible watchpoints on cpu 0
- change one of it to breakpoint
- in case wp and bp do not share slots,
we create another watchpoint to ensure
the slot accounting is correct
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Milind Chabbi <chabbi.milind@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oleg Nesterov <onestero@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/20180312134548.31532-9-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It isn't necessary to pass the 'start', 'end' and 'overwrite' arguments
to perf_mmap__read_init(). The data is stored in the struct perf_mmap.
Discard the parameters.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1520350567-80082-8-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
