Commit graph

122 commits

Author SHA1 Message Date
Zheng Yongjun
3316fb80a0 fs/lockd: convert comma to semicolon
Replace a comma between expression statements by a semicolon.

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-12-16 07:57:37 -05:00
Calum Mackay
9b82d88d59 lockd: don't use interval-based rebinding over TCP
NLM uses an interval-based rebinding, i.e. it clears the transport's
binding under certain conditions if more than 60 seconds have elapsed
since the connection was last bound.

This rebinding is not necessary for an autobind RPC client over a
connection-oriented protocol like TCP.

It can also cause problems: it is possible for nlm_bind_host() to clear
XPRT_BOUND whilst a connection worker is in the middle of trying to
reconnect, after it had already been checked in xprt_connect().

When the connection worker notices that XPRT_BOUND has been cleared
under it, in xs_tcp_finish_connecting(), that results in:

	xs_tcp_setup_socket: connect returned unhandled error -107

Worse, it's possible that the two can get into lockstep, resulting in
the same behaviour repeated indefinitely, with the above error every
300 seconds, without ever recovering, and the connection never being
established. This has been seen in practice, with a large number of NLM
client tasks, following a server restart.

The existing callers of nlm_bind_host & nlm_rebind_host should not need
to force the rebind, for TCP, so restrict the interval-based rebinding
to UDP only.

For TCP, we will still rebind when needed, e.g. on timeout, and connection
error (including closure), since connection-related errors on an existing
connection, ECONNREFUSED when trying to connect, and rpc_check_timeout(),
already unconditionally clear XPRT_BOUND.

To avoid having to add the fix, and explanation, to both nlm_bind_host()
and nlm_rebind_host(), remove the duplicate code from the former, and
have it call the latter.

Drop the dprintk, which adds no value over a trace.

Signed-off-by: Calum Mackay <calum.mackay@oracle.com>
Fixes: 35f5a422ce ("SUNRPC: new interface to force an RPC rebind")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-12-02 14:05:54 -05:00
Trond Myklebust
e6237b6feb NFSv4.1: Don't rebind to the same source port when reconnecting to the server
NFSv2, v3 and NFSv4 servers often have duplicate replay caches that look
at the source port when deciding whether or not an RPC call is a replay
of a previous call. This requires clients to perform strange TCP gymnastics
in order to ensure that when they reconnect to the server, they bind
to the same source port.

NFSv4.1 and NFSv4.2 have sessions that provide proper replay semantics,
that do not look at the source port of the connection. This patch therefore
ensures they can ignore the rebind requirement.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-11-03 21:28:45 -05:00
Trond Myklebust
b422df915c lockd: Store the lockd client credential in struct nlm_host
When we create a new lockd client, we want to be able to pass the
correct credential of the process that created the struct nlm_host.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-04-26 17:51:23 -04:00
Trond Myklebust
79caa5fad4 SUNRPC: Cache cred of process creating the rpc_client
When converting kuids to AUTH_UNIX creds, etc we will want to use the
same user namespace as the process that created the rpc client.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-04-26 16:00:48 -04:00
NeilBrown
4a9be28c45 NFS: fix mount/umount race in nlmclnt.
If the last NFSv3 unmount from a given host races with a mount from the
same host, we can destroy an nlm_host that is still in use.

Specifically nlmclnt_lookup_host() can increment h_count on
an nlm_host that nlmclnt_release_host() has just successfully called
refcount_dec_and_test() on.
Once nlmclnt_lookup_host() drops the mutex, nlm_destroy_host_lock()
will be called to destroy the nlmclnt which is now in use again.

The cause of the problem is that the dec_and_test happens outside the
locked region.  This is easily fixed by using
refcount_dec_and_mutex_lock().

Fixes: 8ea6ecc8b0 ("lockd: Create client-side nlm_host cache")
Cc: stable@vger.kernel.org (v2.6.38+)
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-18 22:39:34 -04:00
Amir Goldstein
93f38b6fae lockd: fix access beyond unterminated strings in prints
printk format used %*s instead of %.*s, so hostname_len does not limit
the number of bytes accessed from hostname.

Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-10-29 16:58:04 -04:00
Trond Myklebust
535cb8f319 lockd: Fix server refcounting
The server shouldn't actually delete the struct nlm_host until it hits
the garbage collector. In order to make that work correctly with the
refcount API, we can bump the refcount by one, and then use
refcount_dec_if_one() in the garbage collector.

Signed-off-by: Trond Myklebust <trondmy@gmail.com>
Acked-by: J. Bruce Fields <bfields@fieldses.org>
2018-01-24 17:33:57 -05:00
Elena Reshetova
c751082cef lockd: convert nsm_handle.sm_count from atomic_t to refcount_t
atomic_t variables are currently used to implement reference
counters with the following properties:
 - counter is initialized to 1 using atomic_set()
 - a resource is freed upon counter reaching zero
 - once counter reaches zero, its further
   increments aren't allowed
 - counter schema uses basic atomic operations
   (set, inc, inc_not_zero, dec_and_test, etc.)

Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.

The variable nsm_handle.sm_count is used as pure reference counter.
Convert it to refcount_t and fix up the operations.

**Important note for maintainers:

Some functions from refcount_t API defined in lib/refcount.c
have different memory ordering guarantees than their atomic
counterparts.
The full comparison can be seen in
https://lkml.org/lkml/2017/11/15/57 and it is hopefully soon
in state to be merged to the documentation tree.
Normally the differences should not matter since refcount_t provides
enough guarantees to satisfy the refcounting use cases, but in
some rare cases it might matter.
Please double check that you don't have some undocumented
memory guarantees for this variable usage.

For the nsm_handle.sm_count it might make a difference
in following places:
 - nsm_release(): decrement in refcount_dec_and_lock() only
   provides RELEASE ordering, control dependency on success
   and holds a spin lock on success vs. fully ordered atomic
   counterpart. No change for the spin lock guarantees.

Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2018-01-14 23:06:29 -05:00
Elena Reshetova
fee21fb587 lockd: convert nlm_host.h_count from atomic_t to refcount_t
atomic_t variables are currently used to implement reference
counters with the following properties:
 - counter is initialized to 1 using atomic_set()
 - a resource is freed upon counter reaching zero
 - once counter reaches zero, its further
   increments aren't allowed
 - counter schema uses basic atomic operations
   (set, inc, inc_not_zero, dec_and_test, etc.)

Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.

The variable nlm_host.h_count  is used as pure reference counter.
Convert it to refcount_t and fix up the operations.

**Important note for maintainers:

Some functions from refcount_t API defined in lib/refcount.c
have different memory ordering guarantees than their atomic
counterparts.
The full comparison can be seen in
https://lkml.org/lkml/2017/11/15/57 and it is hopefully soon
in state to be merged to the documentation tree.
Normally the differences should not matter since refcount_t provides
enough guarantees to satisfy the refcounting use cases, but in
some rare cases it might matter.
Please double check that you don't have some undocumented
memory guarantees for this variable usage.

For the nlm_host.h_count it might make a difference
in following places:
 - nlmsvc_release_host(): decrement in refcount_dec()
   provides RELEASE ordering, while original atomic_dec()
   was fully unordered. Since the change is for better, it
   should not matter.
 - nlmclnt_release_host(): decrement in refcount_dec_and_test() only
   provides RELEASE ordering and control dependency on success
   vs. fully ordered atomic counterpart. It doesn't seem to
   matter in this case since object freeing happens under mutex
   lock anyway.

Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2018-01-14 23:06:29 -05:00
Vasily Averin
9e137ed5ab nlm_shutdown_hosts_net() cleanup
nlm_complain_hosts() walks through nlm_server_hosts hlist, which should
be protected by nlm_host_mutex.

Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2017-11-27 16:45:11 -05:00
Vasily Averin
e919b07652 lockd: remove net pointer from messages
Publishing of net pointer is not safe,
use net->ns.inum as net ID in debug messages

[  171.757678] lockd_up_net: per-net data created; net=f00001e7
[  171.767188] NFSD: starting 90-second grace period (net f00001e7)
[  300.653313] lockd: nuking all hosts in net f00001e7...
[  300.653641] lockd: host garbage collection for net f00001e7
[  300.653968] lockd: nlmsvc_mark_resources for net f00001e7
[  300.711483] lockd_down_net: per-net data destroyed; net=f00001e7
[  300.711847] lockd: nuking all hosts in net 0...
[  300.711847] lockd: host garbage collection for net 0
[  300.711848] lockd: nlmsvc_mark_resources for net 0

Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2017-11-27 16:45:10 -05:00
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Andrey Ryabinin
0d0f4aab4e lockd: get rid of reference-counted NSM RPC clients
Currently we have reference-counted per-net NSM RPC client
which created on the first monitor request and destroyed
after the last unmonitor request. It's needed because
RPC client need to know 'utsname()->nodename', but utsname()
might be NULL when nsm_unmonitor() called.

So instead of holding the rpc client we could just save nodename
in struct nlm_host and pass it to the rpc_create().
Thus ther is no need in keeping rpc client until last
unmonitor request. We could create separate RPC clients
for each monitor/unmonitor requests.

Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-10-23 15:57:27 -04:00
Andrey Ryabinin
0ad95472bf lockd: create NSM handles per net namespace
Commit cb7323fffa ("lockd: create and use per-net NSM
 RPC clients on MON/UNMON requests") introduced per-net
NSM RPC clients. Unfortunately this doesn't make any sense
without per-net nsm_handle.

E.g. the following scenario could happen
Two hosts (X and Y) in different namespaces (A and B) share
the same nsm struct.

1. nsm_monitor(host_X) called => NSM rpc client created,
	nsm->sm_monitored bit set.
2. nsm_mointor(host-Y) called => nsm->sm_monitored already set,
	we just exit. Thus in namespace B ln->nsm_clnt == NULL.
3. host X destroyed => nsm->sm_count decremented to 1
4. host Y destroyed => nsm_unmonitor() => nsm_mon_unmon() => NULL-ptr
	dereference of *ln->nsm_clnt

So this could be fixed by making per-net nsm_handles list,
instead of global. Thus different net namespaces will not be able
share the same nsm_handle.

Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-10-12 17:31:05 -04:00
Linus Torvalds
b6669737d3 Merge branch 'for-3.9' of git://linux-nfs.org/~bfields/linux
Pull nfsd changes from J Bruce Fields:
 "Miscellaneous bugfixes, plus:

   - An overhaul of the DRC cache by Jeff Layton.  The main effect is
     just to make it larger.  This decreases the chances of intermittent
     errors especially in the UDP case.  But we'll need to watch for any
     reports of performance regressions.

   - Containerized nfsd: with some limitations, we now support
     per-container nfs-service, thanks to extensive work from Stanislav
     Kinsbursky over the last year."

Some notes about conflicts, since there were *two* non-data semantic
conflicts here:

 - idr_remove_all() had been added by a memory leak fix, but has since
   become deprecated since idr_destroy() does it for us now.

 - xs_local_connect() had been added by this branch to make AF_LOCAL
   connections be synchronous, but in the meantime Trond had changed the
   calling convention in order to avoid a RCU dereference.

There were a couple of more obvious actual source-level conflicts due to
the hlist traversal changes and one just due to code changes next to
each other, but those were trivial.

* 'for-3.9' of git://linux-nfs.org/~bfields/linux: (49 commits)
  SUNRPC: make AF_LOCAL connect synchronous
  nfsd: fix compiler warning about ambiguous types in nfsd_cache_csum
  svcrpc: fix rpc server shutdown races
  svcrpc: make svc_age_temp_xprts enqueue under sv_lock
  lockd: nlmclnt_reclaim(): avoid stack overflow
  nfsd: enable NFSv4 state in containers
  nfsd: disable usermode helper client tracker in container
  nfsd: use proper net while reading "exports" file
  nfsd: containerize NFSd filesystem
  nfsd: fix comments on nfsd_cache_lookup
  SUNRPC: move cache_detail->cache_request callback call to cache_read()
  SUNRPC: remove "cache_request" argument in sunrpc_cache_pipe_upcall() function
  SUNRPC: rework cache upcall logic
  SUNRPC: introduce cache_detail->cache_request callback
  NFS: simplify and clean cache library
  NFS: use SUNRPC cache creation and destruction helper for DNS cache
  nfsd4: free_stid can be static
  nfsd: keep a checksum of the first 256 bytes of request
  sunrpc: trim off trailing checksum before returning decrypted or integrity authenticated buffer
  sunrpc: fix comment in struct xdr_buf definition
  ...
2013-02-28 18:02:55 -08:00
Sasha Levin
b67bfe0d42 hlist: drop the node parameter from iterators
I'm not sure why, but the hlist for each entry iterators were conceived

        list_for_each_entry(pos, head, member)

The hlist ones were greedy and wanted an extra parameter:

        hlist_for_each_entry(tpos, pos, head, member)

Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.

Besides the semantic patch, there was some manual work required:

 - Fix up the actual hlist iterators in linux/list.h
 - Fix up the declaration of other iterators based on the hlist ones.
 - A very small amount of places were using the 'node' parameter, this
 was modified to use 'obj->member' instead.
 - Coccinelle didn't handle the hlist_for_each_entry_safe iterator
 properly, so those had to be fixed up manually.

The semantic patch which is mostly the work of Peter Senna Tschudin is here:

@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;

type T;
expression a,c,d,e;
identifier b;
statement S;
@@

-T b;
    <+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
    ...+>

[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:24 -08:00
Jeff Layton
5976687a2b sunrpc: move address copy/cmp/convert routines and prototypes from clnt.h to addr.h
These routines are used by server and client code, so having them in a
separate header would be best.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-02-05 09:41:14 -05:00
Trond Myklebust
a2d30a54df lockd: Remove BUG_ON()s in fs/lockd/host.c
- Convert the non-trivial ones into WARN_ON_ONCE().
- Remove the trivial refcounting BUGs

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-04 14:43:39 -05:00
Stanislav Kinsbursky
9695c7057f SUNRPC: service request network namespace helper introduced
This is a cleanup patch - makes code looks simplier.
It replaces widely used rqstp->rq_xprt->xpt_net by introduced SVC_NET(rqstp).

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-07-27 16:49:21 -04:00
Stanislav Kinsbursky
e2edaa98cb Lockd: add more debug to host shutdown functions
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-07-27 16:48:44 -04:00
Stanislav Kinsbursky
d5850ff9ea Lockd: host complaining function introduced
Just a small cleanup.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-07-27 16:48:44 -04:00
Stanislav Kinsbursky
caa4e76b6f LockD: manage used host count per networks namespace
This patch introduces moves nrhosts in per-net data.
It also adds kernel warning to nlm_shutdown_hosts_net() about remaining hosts
in specified network namespace context.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-07-27 16:48:43 -04:00
Stanislav Kinsbursky
3cf7fb07e0 LockD: manage garbage collection timeout per networks namespace
This patch moves next_gc to per-net data.

Note: passed network can be NULL (when Lockd kthread is exiting of Lockd
module is removing).

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-07-27 16:48:43 -04:00
Stanislav Kinsbursky
27adaddc8d LockD: make garbage collector network namespace aware.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-07-27 16:48:43 -04:00
Stanislav Kinsbursky
b26411f85d LockD: mark host per network namespace on garbage collect
This is required for per-network NLM shutdown and cleanup.
This patch passes init_net for a while.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-07-27 16:48:43 -04:00
Stanislav Kinsbursky
3b64739fb9 Lockd: shutdown NLM hosts in network namespace context
Lockd now managed in network namespace context. And this patch introduces
network namespace related NLM hosts shutdown in case of releasing per-net Lockd
resources.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-02-15 00:19:48 -05:00
Stanislav Kinsbursky
66697bfd6a LockD: make nlm hosts network namespace aware
This object depends on RPC client, and thus on network namespace.
So let's make it's allocation and lookup in network namespace context.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-02-15 00:19:48 -05:00
Mi Jinlong
849a1cf13d SUNRPC: Replace svc_addr_u by sockaddr_storage
For IPv6 local address, lockd can not callback to client for
missing scope id when binding address at inet6_bind:

 324       if (addr_type & IPV6_ADDR_LINKLOCAL) {
 325               if (addr_len >= sizeof(struct sockaddr_in6) &&
 326                   addr->sin6_scope_id) {
 327                       /* Override any existing binding, if another one
 328                        * is supplied by user.
 329                        */
 330                       sk->sk_bound_dev_if = addr->sin6_scope_id;
 331               }
 332
 333               /* Binding to link-local address requires an interface */
 334               if (!sk->sk_bound_dev_if) {
 335                       err = -EINVAL;
 336                       goto out_unlock;
 337               }

Replacing svc_addr_u by sockaddr_storage, let rqstp->rq_daddr contains more info
besides address.

Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-09-14 08:21:48 -04:00
Chuck Lever
80c30e8de4 NLM: Fix "kernel BUG at fs/lockd/host.c:417!" or ".../host.c:283!"
Nick Bowler <nbowler@elliptictech.com> reports:

> We were just having some NFS server troubles, and my client machine
> running 2.6.38-rc1+ (specifically, commit 2b1caf6ed7) crashed
> hard (syslog output appended to this mail).
>
> I'm not sure what the exact timeline was or how to reproduce this,
> but the server was rebooted during all this.  Since I've never seen
> this happen before, it is possibly a regression from previous kernel
> releases.  However, I recently updated my nfs-utils (on the client) to
> version 1.2.3, so that might be related as well.

  [ BUG output redacted ]

When done searching, the for_each_host loop in next_host_state() falls
through and returns the final host on the host chain without bumping
it's reference count.

Since the host's ref count is only one at that point, releasing the
host in nlm_host_rebooted() attempts to destroy the host prematurely,
and therefore hits a BUG().

Likely, the original intent of the for_each_host behavior in
next_host_state() was to handle the case when the host chain is empty.
Searching the chain and finding no suitable host to return needs to be
handled as well.

Defensively restructure next_host_state() always to return NULL when
the loop falls through.

Introduced by commit b10e30f6 "lockd: reorganize nlm_host_rebooted".

Cc: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-01-25 15:24:47 -05:00
Dan Carpenter
51f128ea1c lockd: double unlock in next_host_state()
We unlock again after we goto out.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-01-04 13:10:37 -05:00
Chuck Lever
7969183660 lockd: Remove src_sap and src_len from nlm_lookup_host_info struct
Clean up.

The contents of the src_sap field is not used in nlm_alloc_host().

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-12-16 12:37:27 -05:00
Chuck Lever
2025889828 lockd: Remove nlm_lookup_host()
Clean up.

Remove the now unused helper nlm_lookup_host().

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-12-16 12:37:27 -05:00
Chuck Lever
fcc072c783 lockd: Make nrhosts an unsigned long
Clean up.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-12-16 12:37:27 -05:00
Chuck Lever
d2df0484bb lockd: Rename nlm_hosts
Clean up.

nlm_hosts now contains only server-side entries.  Rename it to match
convention of client side cache.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-12-16 12:37:27 -05:00
Chuck Lever
67216b94d4 lockd: Clean up nlmsvc_lookup_host()
Clean up.

Change nlmsvc_lookup_host() to be purpose-built for server-side
nlm_host management.  This replaces the generic nlm_lookup_host()
helper function, just like on the client side.  The lookup logic is
specialized for server host lookups.

The server side cache also gets its own specialized equivalent of the
nlm_release_host() function.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-12-16 12:37:26 -05:00
Chuck Lever
8ea6ecc8b0 lockd: Create client-side nlm_host cache
NFS clients don't need the garbage collection processing that is
performed on nlm_host structures.  The client picks up an nlm_host at
mount time and holds a reference to it until the file system is
unmounted.

Servers, on the other hand, don't have a precise way to tell when an
nlm_host is no longer being used, so zero refcount nlm_host entries
are left to expire in the cache after a time.

Basically there's nothing holding a reference to an nlm_host between
individual server-side NLM requests, but we can't afford the expense
of recreating them for every new NLM request from a client.  The
nlm_host cache adds some lifetime hysteresis to entries in the cache
so the next time a particular nlm_host is needed, it's likely to be
discovered by a lookup rather than created from whole cloth.

With the new implementation, client nlm_host cache items are no longer
garbage collected, and are destroyed directly by a new release
function specialized for client entries, nlmclnt_release_host().  They
are cached in their own data structure, and have their own lookup
logic, simplified and specialized for client nlm_host entries.

However, the client nlm_host cache still shares reboot recovery logic
with the server nlm_host cache.  The NSM "peer rebooted" downcall for
clients and servers still come through the same RPC call.  This is a
legacy formal API that would be difficult to alter, and besides, the
user space NSM implementation can't tell the difference between peers
that are clients or servers.

For this reason, the client cache continues to share the
nlm_host_mutex (and reboot recovery logic) with the server cache.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-12-16 12:37:26 -05:00
Chuck Lever
723bb5b505 lockd: Add nlm_destroy_host_locked()
Refactor the tail of nlm_gc_hosts() into nlm_destroy_host() so that
this logic can be used separately from garbage collection.

Rename it _locked() to document that it must be called with the hosts
cache mutex held.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-12-16 12:37:26 -05:00
Chuck Lever
a7952f4056 lockd: Add nlm_alloc_host()
Refactor nlm_host allocation and initialization into a separate
function.  This will be the common piece of server and client nlm_host
lookup logic after the nlm_host cache is split.

Small change: use kmalloc() instead of kzalloc(), as we're overwriting
almost all fields in the new nlm_host struct with non-zero values
immediately after it is allocated.  An added benefit is we now have an
explicit reference to each field name where it is initialized (for all
you cscope fans out there).

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-12-16 12:37:26 -05:00
J. Bruce Fields
b10e30f655 lockd: reorganize nlm_host_rebooted
Minor reorganization; no change in behavior.  This will save some
duplicated code after we split the client and server host caches.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
[ cel: Forward-ported to 2.6.37 ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-12-16 12:37:26 -05:00
J. Bruce Fields
b113746888 lockd: define host_for_each{_safe} macros
We've got a lot of loops like this, and I find them a little easier to
read with the macros.  More such loops are coming.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
[ cel: Forward-ported to 2.6.37 ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-12-16 12:37:26 -05:00
Trond Myklebust
8e35f8e7c6 NLM: Fix a regression in lockd
Nick Bowler reports:
There are no unusual messages on the client... but I just logged into
the server and I see lots of messages of the following form:

  nfsd: request from insecure port (192.168.8.199:35766)!
  nfsd: request from insecure port (192.168.8.199:35766)!
  nfsd: request from insecure port (192.168.8.199:35766)!
  nfsd: request from insecure port (192.168.8.199:35766)!
  nfsd: request from insecure port (192.168.8.199:35766)!

Bisected to commit 9247685088 (SUNRPC:
Properly initialize sock_xprt.srcaddr in all cases)

Apparently, removing the 'transport->srcaddr.ss_family = family' from
xs_create_sock() triggers this due to nlmclnt_lookup_host() incorrectly
initialising the srcaddr family to AF_UNSPEC.

Reported-by: Nick Bowler <nbowler@elliptictech.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-11-15 20:44:26 -05:00
Pavel Emelyanov
c653ce3f0a sunrpc: Add net to rpc_create_args
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-01 17:18:56 -04:00
Jeff Layton
cdd30fa166 lockd: release reference to nsm_handle in nlm_host_rebooted
nsm_reboot_lookup takes a reference to the nsm_handle that it returns,
but nlm_host_rebooted never releases that reference.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2010-02-08 16:20:35 -05:00
Jeff Layton
4516fc0454 sunrpc: add routine for comparing addresses
lockd needs these sort of routines, as does the NFSv4 callback code.

Move lockd's routines into common code and rename them so that they can
be used by others.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-08-21 11:27:42 -04:00
Chuck Lever
b97a56747e lockd: Replace nlm_clear_port()
Clean up: Use shared rpc_set_port() function instead of nlm_clear_port().

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09 15:09:38 -04:00
Chuck Lever
e6765b8397 NSM: Remove include/linux/lockd/sm_inter.h
Clean up: The include/linux/lockd/sm_inter.h header is nearly empty
now.  Remove it.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06 11:53:55 -05:00
Chuck Lever
92fd91b998 NLM: Remove "create" argument from nsm_find()
Clean up: nsm_find() now has only one caller, and that caller
unconditionally sets the @create argument. Thus the @create
argument is no longer needed.

Since nsm_find() now has a more specific purpose, pick a more
appropriate name for it.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06 11:53:54 -05:00
Chuck Lever
8c7378fd2a NLM: Call nsm_reboot_lookup() instead of nsm_find()
Invoke the newly introduced nsm_reboot_lookup() function in
nlm_host_rebooted() instead of nsm_find().

This introduces just one behavioral change: debugging messages
produced during reboot notification will now appear when the
NLMDBG_MONITOR flag is set, but not when the NLMDBG_HOSTCACHE flag
is set.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06 11:53:54 -05:00
Chuck Lever
576df4634e NLM: Decode "priv" argument of NLMPROC_SM_NOTIFY as an opaque
The NLM XDR decoders for the NLMPROC_SM_NOTIFY procedure should treat
their "priv" argument truly as an opaque, as defined by the protocol,
and let the upper layers figure out what is in it.

This will make it easier to modify the contents and interpretation of
the "priv" argument, and keep knowledge about what's in "priv" local
to fs/lockd/mon.c.

For now, the NLM and NSM implementations should behave exactly as they
did before.

The formation of the address of the rebooted host in
nlm_host_rebooted() may look a little strange, but it is the inverse
of how nsm_init_private() forms the private cookie.  Plus, it's
going away soon anyway.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06 11:53:54 -05:00