Commit graph

139 commits

Author SHA1 Message Date
Len Brown
ec28dcc6b4 Merge branches 'battery-2.6.34', 'bugzilla-10805', 'bugzilla-14668', 'bugzilla-531916-power-state', 'ht-warn-2.6.34', 'pnp', 'processor-rename', 'sony-2.6.34', 'suse-bugzilla-531547', 'tz-check', 'video' and 'misc-2.6.34' into release 2010-03-14 21:30:17 -04:00
Haojian Zhuang
28db38888b power_supply: Enable power supply of max8925
MAX8925 is a PMIC that contains charger component

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07 22:17:17 +01:00
Mark Brown
59f25070df mfd: Update WM8350 drivers for changed interrupt numbers
The headphone detect and charger are using the IRQ numbers so need
to take account of irq_base with the genirq conversion. I obviously
picked the wrong system for initial testing.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07 22:16:58 +01:00
Mark Brown
f99344fc69 mfd: Add a data argument to the WM8350 IRQ free function
To better match genirq.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07 22:16:56 +01:00
Grazvydas Ignotas
afbc74fdc5 power_supply: bq27x00: fix voltage and current units
The chip returns voltage and current in mV and mA, but
power supply class uses uV and uA, so add missing conversion.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-02-27 18:09:24 +03:00
Grazvydas Ignotas
4e924a814a power_supply: bq27x00: add status and time properties
The BQ27x00 series of chips can report time-to-empty and
time-to-full, so let's add corresponding properties.
Also report charge status based on status flag register.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-02-27 18:09:23 +03:00
Grazvydas Ignotas
e20908d95e power_supply: bq27x00: add BQ27500 support
BQ27500 is newer fuel gauge chip from TI with slightly changed
register layout and some different register semantics. Add new i2c
ID for it and handle differences where needed. Also rename bq27200
functions to bq27x00, as they are no longer bq27200 specific.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-02-16 21:26:52 +03:00
Grazvydas Ignotas
b4de360815 power_supply: bq27x00: fix temperature conversion
The power supply class requires tenths of degree Celsius.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-02-16 21:26:46 +03:00
Grazvydas Ignotas
ba96f8717e power_supply: bq27x00: remove unused struct fields
These are probably leftover from old TI code.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-02-16 21:26:37 +03:00
Grazvydas Ignotas
97f70c23a1 power_supply: bq27x00: remove double endian swap
The bq27x00 registers are little endian, so just read them as such
and don't do double endian swap on LE machines.

This also gets rid of strange looking shift that was done after
reading 8bit register because endian swap in bq27x00_read() was
messing it up.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-02-16 21:26:14 +03:00
Stefan Weil
5324dc0e38 da9030_battery: fix spelling in comment
platfrom -> platform
monotor -> monitor

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Cc: Anton Vorontsov <cbouatmailru@gmail.com>
Acked-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2010-02-03 01:51:18 +03:00
Mark Brown
f8d94eb77e wm97xx_battery: Clean up some warnings
Staticise work_lock (nothing outside the driver has any reason to
see it) and specify dev when requesting the charger IRQ (since that's
what we pass in when we free it).

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2010-01-29 17:02:13 +03:00
Mark Brown
12b336a8b4 wm97xx_battery: Handle missing platform data gracefully
Don't unconditionally dereference the WM97xx core platform data since
it may not be present, causing an oops.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2010-01-29 17:00:18 +03:00
Alexey Starikovskiy
c955fe8e0b POWER: Add support for cycle_count
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-01-15 16:59:21 -05:00
Thomas Champagne
d54e7929d8 pmu_battery: Fix battery full reporting
Prior to this patch, pmu_battery was unable to report battery full
status. This patch fixes the issue by adding a proper handling code
into pmu_bat_get_property(): if we're on AC and the battery isn't
charging, then the battery is considered full.

Signed-off-by: Thomas Champagne <lafeuil@gmail.com>
Acked-By: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-12-18 03:51:29 +03:00
Linus Torvalds
48e902f0a3 Merge git://git.infradead.org/battery-2.6
* git://git.infradead.org/battery-2.6:
  power_supply_sysfs: Handle -ENODATA in a special way
  wm831x_backup: Remove unused variables
  gta02: Set pcf50633 charger_reference_current_ma
  pcf50633: Query charger status directly
  pcf50633: Properly reenable charging when the supply conditions change
  pcf50633: Get rid of charging restart software auto-triggering
  pcf50633: introduces battery charging current control
  pcf50633: Add ac power supply class to the charger
  wm831x: Factor out WM831x backup battery charger
2009-12-15 08:59:33 -08:00
Alexey Dobriyan
471452104b const: constify remaining dev_pm_ops
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:25 -08:00
Mark Brown
6a6127462e mfd: Mask and unmask wm8350 IRQs on request and free
Bring the WM8350 IRQ API more in line with the generic IRQ API by
masking and unmasking interrupts as they are requested and freed.
This is mostly just a case of deleting the mask and unmask calls
from the individual drivers.

The RTC driver is changed to mask the periodic IRQ after requesting
it rather than only unmasking the alarm IRQ. If the periodic IRQ
fires in the period where it is reqested then there will be a
spurious notification but there should be no serious consequences
from this.

The CODEC drive is changed to explicitly disable headphone jack
detection prior to requesting the IRQs. This will avoid the IRQ
firing with no jack set up.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:40 +01:00
Mark Brown
5a65edbc12 mfd: Convert wm8350 IRQ handlers to irq_handler_t
This is done as simple code transformation, the semantics of the
IRQ API provided by the core are are still very different to those
of genirq (mainly with regard to masking).

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:39 +01:00
Lars-Peter Clausen
68d641efd8 mfd: Fix memleak in pcf50633_client_dev_register
Since platform_device_add_data copies the passed data, the allocated
subdev_pdata is never freed. A simple fix would be to either free subdev_pdata
or put it onto the stack. But since the pcf50633 child devices can rely on
beeing children of the pcf50633 core device it's much more elegant to get access
to pcf50633 core structure through that link. This allows to get completly rid
of pcf5033_subdev_pdata.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13 19:21:17 +01:00
Anton Vorontsov
9d233e8bb9 power_supply_sysfs: Handle -ENODATA in a special way
There are cases when some device can not report any meaningful value,
e.g. TWL4030 charger can report voltage only when charging is
active.

In these cases drivers will return -ENODATA, and we shouldn't flood
kernel log with error messages.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2009-12-03 00:38:06 +03:00
Thomas Kunze
f1fce597e6 collie: add battery driver
This driver is based on tosa_battery.c.
2009-11-27 21:07:23 +01:00
Alan Cox
0e19dbb73e wm831x_backup: Remove unused variables
Signed-off-by: Alan Cox <alan@linux.intel.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-11-17 19:16:38 +03:00
Paul Fertser
c329795052 pcf50633: Query charger status directly
Current scheme is fragile and is likely to go off sync, especially on
batfull->adapter charging automatic MBC transition.

Query the status bit every time we need it instead.

We need to export another function to query for USB presence because
we can't read anything from PCF50633 (via I2C) inside irq context and
that is needed by usb gadgets.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-11-16 03:32:09 +03:00
Paul Fertser
1282b35a1e pcf50633: Properly reenable charging when the supply conditions change
If chgmod == BATFULL, setting chgena has no effect. Datasheet says we
need to set resume instead but when autoresume is used resume doesn't
work. Clear and set chgena instead.

This enables a user to force charging by re-plugging USB even when the
charger entered Battery Full mode, might be handy before a long trip.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-11-16 03:31:40 +03:00
Paul Fertser
e98c73a24f pcf50633: Get rid of charging restart software auto-triggering
After reaching Battery Full condition MBC state machine switches back
into charging mode when the battery voltage falls below 96% of a
battery float voltage. The voltage drop in Li-Ion batteries is
marginal (1-2%) till about 80% of its capacity - which means, after a
BATFULL, charging won't be restarted until 75-80%.

That is a desired behaviour recommended by battery manufacturers,
don't mess with it.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-11-16 03:31:17 +03:00
Balaji Rao
31b4ff06e0 pcf50633: introduces battery charging current control
Implement a new sysfs attribute to allow changing MBC charging limit on
the fly independently of usb current limit. It also gets set
automatically every time usb current limit is changed.

Limiting charging current also prevents violating USB specification in
the case when the whole device is shut down and usb current limit is
reset to the factory default by the pcf50633 state transition.

Signed-off-by: Balaji Rao <balajirrao@openmoko.org>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-11-16 03:28:31 +03:00
Sean McNeil
7677f33f0a pcf50633: Add ac power supply class to the charger
This adds an appropriate ac power_supply class and shows usb only when
at the appropriate current limit.

Signed-off-by: Sean McNeil <sean@mcneil.com>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-11-16 03:28:06 +03:00
Mark Brown
c26964ead5 wm831x: Factor out WM831x backup battery charger
The backup battery on WM831x is a separate IP block to the main PMU
and is largely unrelated to the main supply functionality. Factor it
out into a separate driver in order to reflect this and better support
future hardware versions.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-11-16 03:27:30 +03:00
Anton Vorontsov
f056878332 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:
	drivers/power/wm97xx_battery.c
2009-09-23 03:49:27 +04:00
Mark Brown
3961f7c3cf power_supply: Add driver for the PMU on WM831x PMICs
The WM831x PMICs provide power path management from three sources:
a wall supply, USB and a battery with integrated charger. They also
provide an additional backup supply with integrated for maintaining
always on functionality such as the RTC and monitoring of power
switches.

After some initial configuration at startup the device operates
autonomously, the driver simply provides reporting of the current
state.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2009-09-04 21:02:32 +04:00
Daniel Mack
b0525b48f0 ds2760_battery: Fix integer overflow for time_to_empty_now
On the device we're currently developing, battery sizes of ~2.8Ah and
current flow of ~600mA are typical.

With that values, the life_sec computation overflows due to the
multiplication by 3600.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
Cc: Matt Reimer <mreimer@vpop.net>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2009-09-04 20:26:40 +04:00
Marek Vasut
83a8af0d31 wm97xx_battery: Convert to dev_pm_ops
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2009-09-04 20:21:08 +04:00
Marek Vasut
7c87942aef wm97xx_battery: Use irq to detect charger state
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2009-09-04 20:21:08 +04:00
Marek Vasut
b8bdc1d0cf wm97xx_battery: Use platform_data
This patch converts the wm97xx-battery driver to use platform_data
supplied by ac97 bus.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2009-09-04 20:20:58 +04:00
Linus Torvalds
fbdbf83899 Merge git://git.infradead.org/users/cbou/battery-2.6.31
* git://git.infradead.org/users/cbou/battery-2.6.31:
  Add ds2782 battery gas gauge driver
  olpc_battery: Ensure that the TRICKLE bit is checked
  olpc_battery: Fix up eeprom read function
2009-07-30 16:45:53 -07:00
Daniel Mack
8d631ccff8 ds2760_battery: implement set_charged() feature
The ds2760's internal current meter is not reliable enough as it has an
inacurracy of around ~15%. Without any correction for that error, the
current accumulator is couting up all the time, even though the battery
is already fully charged and hence destroys the static information. The
longer it is connected, the worse is the aberration.

Fortunately, this can be corrected by the DS2760_CURRENT_OFFSET_BIAS
register. Using the external power_supply_set_battery_charged()
function, this register is now gauging the measurement.

A delayed work is used to debounce flaky GPIO signals and to let the
current value settle. Also see Maxim's application note AN4188.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
Cc: Matt Reimer <mreimer@vpop.net>
Cc: Anton Vorontsov <cbou@mail.ru>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-07-30 17:49:16 +04:00
Daniel Mack
e5f5ccb646 power_supply: get_by_name and set_charged functionality
This adds a function that indicates that a battery is fully charged.
It also includes functions to get a power_supply device from the class
of registered devices by name reference. These can be used to find a
specific battery to call power_supply_set_battery_charged() on.

Some battery drivers might need this information to calibrate
themselves.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Ian Molton <spyro@f2s.com>
Cc: Anton Vorontsov <cbou@mail.ru>
Cc: Matt Reimer <mreimer@vpop.net>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-07-30 17:49:15 +04:00
Daniel Mack
ff3417e7ef power_supply: EXPORT_SYMBOL cleanups
While I'm at it, cleanup the power supply code so that EXPORT_SYMBOL_GPL
appears directly after the symbole declaration. checkpatch.pl wants it
that way.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Ian Molton <spyro@f2s.com>
Cc: Matt Reimer <mreimer@vpop.net>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-07-30 17:49:00 +04:00
Daniel Mack
02d0d27588 ds2760_battery: add current_accum module parameter
When connecting a ds2760 to a partly loaded battery the first time,
there must be a way to bootstrap the current_accum value. Without that,
the current capactity value is bogus until the battery is fully charged
for the first time.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
Cc: Matt Reimer <mreimer@vpop.net>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-07-30 17:37:21 +04:00
Daniel Mack
25f2bfa62a ds2760_battery: handle full_active_uAh == 0 case correctly
In systems where the battery monitor is not part of the battery pack and
is hence not bootstrapped with sane values, the full_active_uAh is
likely to be zero.

Handle that case by defaulting to the rated_capacity information which
can be passed to the driver using the new module parameter.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
Acked-by: Matt Reimer <mreimer@vpop.net>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-07-30 17:37:06 +04:00
Daniel Mack
c1e72193ea ds2760_battery: add rated_capacity module parameter
For systems where the ds2760 is soldered directly on the PCB, the 'rated
capacity' register is not set to anything useful.

In order to allow users to bootstrap this value, introduce a new module
parameter 'rated_capacity' and use it to write the internal EEPROM in
case the value differes from what's been given.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
Acked-by: Matt Reimer <mreimer@vpop.net>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-07-30 17:36:47 +04:00
Daniel Mack
5c6e9bf2c9 ds2760_battery: export more features
Export POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW and POWER_SUPPLY_PROP_CAPACITY
features to the power supply core.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
Acked-by: Matt Reimer <mreimer@vpop.net>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-07-30 17:36:29 +04:00
Daniel Mack
2e83a5c5d2 ds2760_battery: delay power supply registration
This fixes a race condition I recently introduced with the PMOD feature
addition (cef437e3: "w1: ds2760_battery: add support for sleep mode
feature").

Postpone the call to power_supply_register() to fix it.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
Acked-by: Matt Reimer <mreimer@vpop.net>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-07-30 17:35:58 +04:00
Mark Brown
4aed03ae58 wm8350_power: Implement charge type property
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-07-14 18:05:56 +04:00
Alexander Beregalov
38c7dc3730 wm97xx_batery: replace driver_data with dev_get_drvdata()
direct access of driver_data is going away.

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-12 13:02:10 -07:00
Andres Salomon
ee8076ed3e power_supply: Add a charge_type property, and use it for olpc driver
This adds a new sysfs file called 'charge_type' which displays the
type of charging (unknown, n/a, trickle charge, or fast charging).

This allows things like battery diagnostics to determine what the
battery/EC is doing without resorting to changing the 'status' sysfs
output.

Signed-off-by: Andres Salomon <dilinger@collabora.co.uk>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-07-02 18:14:37 +04:00
Andres Salomon
144bbeaedc olpc_battery: Add an 'error' sysfs device that displays raw errors
Grab the error code from EC_BAT_ERRCODE and let the user see it (rather
than attempting to decode it as we do with PROP_HEALTH) with a separate
error sysfs file.

Signed-off-by: Andres Salomon <dilinger@collabora.co.uk>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-07-01 02:48:37 +04:00
Andres Salomon
b294a290d2 Revert "power: remove POWER_SUPPLY_PROP_CAPACITY_LEVEL"
This reverts commit 8efe444038 and
4cbc76eadf.

Richard@laptop.org was apparently using CAPACITY_LEVEL for debugging
battery/EC problems, and was upset that it was removed.  This readds it.

Conflicts:

	Documentation/power_supply_class.txt

Signed-off-by: Andres Salomon <dilinger@collabora.co.uk>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-07-01 02:44:03 +04:00
Ryan Mallon
bfdb46ce84 Add ds2782 battery gas gauge driver
This patch adds a driver for ds2782 battery devices.

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-07-01 02:36:58 +04:00