Commit graph

148 commits

Author SHA1 Message Date
Avinash Patil
28cb1749e8 ieee80211: add definition for SMS4 key len
Add SMS4 key length definition to ieee80211_key_len enum.
It's used by WAPI.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-10 20:12:13 +01:00
Avinash Patil
852c0153df ieee80211: add definition for TDLS wide band extended capability
Seventh bit of 8th byte of extended capabilities specifies wide
bandwidth support for TDLS links. Add this definition to ieee80211.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-10 09:42:10 +01:00
Eyal Shapira
fbdd90ea83 mac80211: enable easier manipulation of VHT beamforming caps
Introduce shift and mask defines for beamformee STS cap and number
of sounding dimensions cap as these can take any 3 bit value.
While at it also cleanup an unrequired parenthesis.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25 20:52:01 +01:00
Chun-Yeow Yeoh
8f2535b92d mac80211: process the CSA frame for mesh accordingly
Process the CSA frame according to the procedures define in IEEE Std
802.11-2012 section 10.9.8.4.3 as follow:
* The mesh channel switch parameters element (MCSP) must be availabe.
* If the MCSP's TTL is 1, drop the frame but still process the CSA.
* If the MCSP's precedence value is less than or equal to the current
  precedence value, drop the frame and do not process the CSA.
* The CSA frame is forwarded after TTL is decremented by 1 and the
  initiator field is set to 0. Transmit restrict field and others
  are maintained as is.
* No beacon or probe response frame are handled here.

Also, introduce the debug message used for mesh CSA purpose.

Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28 15:05:28 +01:00
Eliad Peller
5eb7906b47 ieee80211: fix vht cap definitions
VHT_CAP_BEAMFORMER_ANTENNAS cap is actually defined in the draft as
VHT_CAP_BEAMFORMEE_STS_MAX, and its size is 3 bits long.

VHT_CAP_SOUNDING_DIMENSIONS is also 3 bits long.

Fix the definitions and change the cap masking accordingly.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-01 12:17:08 +02:00
John W. Linville
0d8165e9fc Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
Conflicts:
	drivers/net/wireless/iwlwifi/pcie/trans.c
2013-08-29 14:08:24 -04:00
John W. Linville
89c2af3c14 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
Conflicts:
	drivers/net/ethernet/broadcom/Kconfig
2013-08-12 14:45:06 -04:00
Johannes Berg
e7f1935c11 wireless: make TU conversion macros available
A few places in the code (mac80211 and iwlmvm) use the same
TU_TO_JIFFIES() macro and could use TU_TO_EXP_TIME() that
mac80211 has. Make these available to everyone and use them.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-06 11:00:59 +02:00
Joe Perches
574e2af7c0 include: Convert ethernet mac address declarations to use ETH_ALEN
It's convenient to have ethernet mac addresses use
ETH_ALEN to be able to grep for them a bit easier and
also to ensure that the addresses are __aligned(2).

Add #include <linux/if_ether.h> as necessary.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02 12:33:54 -07:00
Fred Zhou
9e2bc79bce ieee80211: add definition for 802.11ac information elements
Add element IDs for Extended BSS Load, VHT TX
Power Envelope, AID, and Quiet Channel.

Signed-off-by: Fred Zhou <fred.zy@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-01 10:49:03 +02:00
Avinash Patil
dcb7a6ce0a ieee80211: add definition for interworking support
IEEE802.11u interworking support is advertised via extended
capabilities IE bit 31. This is 7th bit of 4th byte of extended
capabilities.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-01 10:49:03 +02:00
Jacob Minshall
e05ecccdf7 mac80211: set mesh formation field properly
Cap max peerings at 63 in accordance with IEEE-2012 8.4.2.100.7.
Triggers a beacon regeneration every time the number of peerings changes.
Previously this would only happen if the "accepting peerings" bit changed.

Signed-off-by: Jacob Minshall <jacob@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-03 17:03:18 +02:00
Johannes Berg
4325f6caad wireless: move crypto constants to ieee80211.h
mac80211 and the Intel drivers all define crypto
constants, move them to ieee80211.h instead.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-16 22:39:41 +02:00
Johannes Berg
b2e506bfc4 mac80211: parse VHT channel switch IEs
VHT introduces multiple IEs that need to be parsed for a
wide bandwidth channel switch. Two are (currently) needed
in mac80211:
 * wide bandwidth channel switch element
 * channel switch wrapper element

The former is contained in the latter for beacons and probe
responses, but not for the spectrum management action frames
so the IE parser needs a new argument to differentiate them.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-16 15:29:45 +02:00
Johannes Berg
1b3a2e494b mac80211: handle extended channel switch announcement
Handle the (public) extended channel switch announcement
action frames. Parts of the data in these frames isn't
really in IEs, but put it into the elems struct anyway
to simplify the handling.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-16 15:29:45 +02:00
Johannes Berg
85220d71bf mac80211: support secondary channel offset in CSA
Add support for the secondary channel offset IE in channel
switch announcements. This is necessary for proper handling
of CSA on HT access points.

For this to work it is also necessary to convert everything
here to use chandef structs instead of just channels. The
driver updates aren't really correct though. In particular,
the TI wl18xx driver update can't possibly be right since
it just ignores the new channel width for lack of firmware
API.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-16 15:29:44 +02:00
Johannes Berg
b4f286a1c0 mac80211: support extended channel switch
Support extended channel switch when the operating
class is one of the global operating classes as
defined in Annex E of 802.11-2012. If it isn't,
disconnect from the AP instead.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-16 15:29:43 +02:00
Johannes Berg
37799e52a2 mac80211: unify CSA action frame/beacon processing
CSA action frame content should be processed as variable IEs
rather than fixed to make it extensible. Unify the code and
process them just like CSA in beacons to make it easier to
extend for HT/VHT.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-16 15:29:42 +02:00
Johannes Berg
79ba1d8910 mac80211: parse Timeout Interval Element using a struct
Instead of open-coding the accesses and length check do
the length check in the IE parser and assign a struct
pointer for use in the remaining code.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08 09:16:58 +02:00
Janusz Dziedzic
19dde0bd71 cfg80211: add P2P Notice of Absence attribute
Add P2P Notice of Absence attribute structure.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-22 11:33:12 +01:00
Johannes Berg
55d942f424 mac80211: restrict peer's VHT capabilities to own
Implement restricting peer VHT capabilities to the device's own
capabilities. This is useful when a single driver supports more
than one device and the devices have different capabilities
(often they will differ in the number of spatial streams), but
in particular is also necessary for VHT capability overrides to
work correctly -- otherwise it'd be possible to e.g. advertise,
due to overrides, that TX-STBC is not supported, but then still
use it to TX to the AP because it supports RX-STBC.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:36:03 +01:00
Johannes Berg
c8bb93f5f5 wireless: remove unused VHT MCS defines
There's an enum with the same values (but slightly
different names except for NOT_SUPPORTED) that is
actually used, so remove the defines.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:35:47 +01:00
Felix Fietkau
b8a31c9a5a ieee80211: mark 802.11 related structs as being 2-byte aligned
Regardless of what header features they use, or if they align the IP
header or not, 802.11 packets from all drivers guarantee a 2-byte
alignment (and there's a debug WARN_ON in case they don't).

Annotate packet structs with __aligned(2) to allow the compiler to use
16-bit load/store operations on platforms with extremely inefficient
unaligned access (e.g. MIPS).

This reduces code size and improves performance on affected platforms
and causes no binary code change on others.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:35:45 +01:00
Johannes Berg
9a886586c8 wireless: move sequence number arithmetic to ieee80211.h
Move the sequence number arithmetic code from mac80211 to
ieee80211.h so others can use it. Also rename the functions
from _seq to _sn, they operate on the sequence number, not
the sequence_control field.

Also move macros to convert the sequence control to/from
the sequence number value from various drivers.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06 16:35:44 +01:00
Johannes Berg
c6f9d6c3bd mac80211: advertise operating mode notification capability
Use the new extended capabilities advertising to advertise
the fact that operating mode notification is supported.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15 09:41:42 +01:00
Johannes Berg
4a3cb702b0 mac80211: constify IE parsing
Make all the parsed IE pointers const, and propagate
the change to all the users etc.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15 09:41:39 +01:00
Johannes Berg
0af83d3df5 mac80211: handle VHT operating mode notification
Handle the operating mode notification action frame.
When the supported streams or the bandwidth change
let the driver and rate control algorithm know.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15 09:41:32 +01:00
Johannes Berg
7bf9b9a0f0 wireless: define operating mode action frame
Define the action frame format, the VHT category
and its action types and the field format and EID
for operating mode notifications. The frame may
be used outside of VHT context as well, so don't
include "VHT" in the names.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15 09:41:31 +01:00
Marco Porsch
3f52b7e328 mac80211: mesh power save basics
Add routines to
- maintain a PS mode for each peer and a non-peer PS mode
- indicate own PS mode in transmitted frames
- track neighbor STAs power modes
- buffer frames when neighbors are in PS mode
- add TIM and Awake Window IE to beacons
- release frames in Mesh Peer Service Periods

Add local_pm to sta_info to represent the link-specific power
mode at this station towards the remote station. When a peer
link is established, use the default power mode stored in mesh
config. Update the PS status if the peering status of a neighbor
changes.
Maintain a mesh power mode for non-peer mesh STAs. Set the
non-peer power mode to active mode during peering. Authenticated
mesh peering is currently not working when either node is
configured to be in power save mode.

Indicate the current power mode in transmitted frames. Use QoS
Nulls to indicate mesh power mode transitions.
For performance reasons, calls to the function setting the frame
flags are placed in HWMP routing routines, as there the STA
pointer is already available.

Add peer_pm to sta_info to represent the peer's link-specific
power mode towards the local station. Add nonpeer_pm to
represent the peer's power mode towards all non-peer stations.
Track power modes based on received frames.

Add the ps_data structure to ieee80211_if_mesh (for TIM map, PS
neighbor counter and group-addressed frame buffer).

Set WLAN_STA_PS flag for STA in PS mode to use the unicast frame
buffering routines in the tx path. Update num_sta_ps to buffer
and release group-addressed frames after DTIM beacons.

Announce the awake window duration in beacons if in light or
deep sleep mode towards any peer or non-peer. Create a TIM IE
similarly to AP mode and add it to mesh beacons. Parse received
Awake Window IEs and check TIM IEs for buffered frames.

Release frames towards peers in mesh Peer Service Periods. Use
the corresponding trigger frames and monitor the MPSP status.
Append a QoS Null as trigger frame if neccessary to properly end
the MPSP. Currently, in HT channels MPSPs behave imperfectly and
show large delay spikes and frame losses.

Signed-off-by: Marco Porsch <marco@cozybit.com>
Signed-off-by: Ivan Bezyazychnyy <ivan.bezyazychnyy@gmail.com>
Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-04 18:57:47 +01:00
Bing Zhao
d437c86baa ieee80211: define AKM suite selectors type 5, 6 and 7
Reference: IEEE 802.11-2012 8.4.2.27.3 "AKM suites"

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-24 15:50:05 +01:00
Johannes Berg
ec61cd63dd mac80211: support HT notify channel width action
Support the HT notify channel width action frame
to update the rate scaling about the bandwidth
the peer can receive in.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03 13:01:44 +01:00
Johannes Berg
598a5938e0 wireless: use __packed in ieee80211.h
Use __packed instead of __attribute__((packed)).

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03 13:01:43 +01:00
Vladimir Kondratiev
0f6dfcee2e wireless: more 'capability info' bits
define bits for 'capability info', as in recent spec edition
IEEE802.11-2012

Also, add mask for 2-bit field 'bss type', as it is in 802.11ad

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03 13:01:15 +01:00
Johannes Berg
01331040e6 wireless: fix VHT max AMPDU exponent definition
This is really a 3-bit field, not a single bit,
so declare a mask and shift. Also fix hwsim, it
advertises the maximum possible.

While at it reindent all the defines using tabs
instead of spaces.

Change-Id: I7cd81c0d72f76deb5010aba5bfa3dd312006e898
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-06 14:02:51 +01:00
Johannes Berg
f2d9d270c1 mac80211: support VHT association
Determine the VHT channel from the AP's VHT operation IE
(if present) and configure the hardware to that channel
if it is supported. If channel contexts cause a channel
to not be usable, try a smaller bandwidth.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-27 11:56:07 +01:00
Johannes Berg
7173a1fa53 wireless: add definitions for VHT MCS support
Add definitions for the VHT MCS support values that
are used to indicate, for each number of streams
(1 through 8) which MCSes are supported.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-26 12:43:00 +01:00
Marco Porsch
65821635d2 mac80211: move Mesh Capability field definition to ieee80211.h
Signed-off-by: Marco Porsch <marco.porsch@etit.tu-chemnitz.de>
[prefix with IEEE80211_]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-26 11:35:21 +01:00
Johannes Berg
5a306f5887 mac80211: introduce IEEE80211_NUM_TIDS and use it
Introduce IEEE80211_NUM_TIDS in the generic 802.11
header file and use it in place of STA_TID_NUM and
NUM_RX_DATA_QUEUES which are both really the number
of TIDs.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-19 15:44:00 +01:00
Arend van Spriel
ba350fbc53 wireless: add peer-to-peer related definitions
The Peer-to-Peer IE is vendor-specific IE identified by WiFi Alliance
OUI and specific P2P OUI type. The payload of this IE consists of
so-called P2P attributes. This patch adds definitions for processing
these attributes.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-05 15:35:32 +01:00
Arend van Spriel
3821b4247b wireless: remove duplicate enum ieee80211_eid definitions
WLAN_EID_WPA and WLAN_EID_GENERIC mapped to the same value
as WLAN_EID_VENDOR_SPECIFIC. The last one being more in line
with the standard specification. Removing WLAN_EID_WPA and
WLAN_EID_GENERIC as there are no longer drivers using these.

Cc: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-18 09:01:55 +02:00
Mahesh Palivela
d4950281d7 ieee80211: Rename VHT cap struct
Rename struct ieee80211_vht_capabilities to ieee80211_vht_cap
and renamed its member vht_capabilities_info to vht_cap_info.

Signed-off-by: Mahesh Palivela <maheshp@posedge.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-17 11:02:13 +02:00
Johannes Berg
ad0ed62f34 wireless: remove obsolete chan no/center freq conversion functions
There are a number of functions that shouldn't really
be used when modern functions that take the band are
available in cfg80211. Remove these, but for now keep
 * ieee80211_freq_to_dsss_chan and
 * ieee80211_dsss_chan_to_freq
as they're used in older drivers.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-06 17:05:36 +02:00
Vladimir Kondratiev
b188148c69 wireless: 60g protocol constants
Provide various constants as defined by the 802.11ad:
frame types, IE's, capability bits, action categories

Introduce GCMP cipher, mandatory by 802.11ad

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-02 15:11:12 +02:00
Mahesh Palivela
ce0e169529 wireless: add VHT (802.11ac) definitions
Add the VHT definitions to be used by drivers supporting it.

Signed-off-by: Mahesh Palivela <maheshp@posedge.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-28 13:08:32 +02:00
Avinash Patil
c2ebea2097 ieee80211: more OUI type definitions for WLAN_OUI_MICROSOFT
WMM and WPS

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-21 16:43:28 +02:00
Chun-Yeow Yeoh
a69cc44fe9 mac80211: implement the proactive PREQ generation
Generate the proactive PREQ element as defined in
Sec. 13.10.9.3 (Case C) of IEEE Std. 802.11-2012
based on the selection of dot11MeshHWMPRootMode as follow:
dot11MeshHWMPRootMode (2) is proactivePREQnoPREP
dot11MeshHWMPRootMode (3) is proactivePREQwithPREP

The proactive PREQ is generated based on the interval
defined by dot11MeshHWMProotInterval.

With this change, proactive RANN element is now generated
if the dot11MeshHWMPRootMode is set to (4) instead of (1).

Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
[line-break commit log]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-14 09:08:56 +02:00
Avinash Patil
535588e61a ieee80211: definitions for Microsoft Vendor OUI and WPA OUI type
Reference: http://standards.ieee.org/develop/regauth/oui/oui.txt

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-12 13:55:33 +02:00
Chun-Yeow Yeoh
a4f606ea73 {nl,cfg,mac}80211: fix the coding style related to mesh parameters
fix the coding style related to mesh parameters, especially the indentation,
as pointed out by Johannes Berg.

Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-11 09:23:45 +02:00
Javier Cardona
dcca1cfc09 mac80211: Set the correct values for hwmp (1) and airtimeLinkMetric (1)
Per sections 8.4.2.100.2 and 8.4.2.100.3 of Std 802.11-2012

Reported-by: Shinichi Hotori <hotorinn@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16 14:19:29 -04:00
Javier Cardona
dbf498fbaf mac80211: Implement mesh synchronization framework
This patch adds MBSS extensible synchronization framework (Sec.
13.13.2 of IEEE Std. 802.11-2012).

The framework is implemented via an ops table which defines the
following functions:

    rx_bcn_presp() - this is called every time a mesh beacon is
received.
    adjust_tbtt() - this is called immediately before a beacon is about
to be transmitted.

The default neighbor offset synchronization defined in the standard is
implemented.  We also provide template functions for vendor specific
methods.

When neighbor offset synchronization is active (which is the default)
mesh neighbors in the same MBSS will track timing offsets to each other
and compensate clock drift.

In our tests we observed that this mesh synchronization implementation
successfully corrected drifts between stations of ~2PPM while
introducing a jitter of ~20us.

It is also possible to test this framework on mac80211_hwsim simulated
phys to see how it behaves under different topologies, over poor links,
etc.

Signed-off-by: Marco Porsch <marco.porsch@s2005.tu-chemnitz.de>
Signed-off-by: Pavel Zubarev <pavel.zubarev@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10 15:20:31 -04:00