Commit graph

155 commits

Author SHA1 Message Date
Peter Oberparleiter
cffab6bc55 [S390] dasd: use correct label location for diag fba disks
Partition boundary calculation fails for DASD FBA disks under the
following conditions:
- disk is formatted with CMS FORMAT with a blocksize of more than
  512 bytes
- all of the disk is reserved to a single CMS file using CMS RESERVE
- the disk is accessed using the DIAG mode of the DASD driver

Under these circumstances, the partition detection code tries to
read the CMS label block containing partition-relevant information
from logical block offset 1, while it is in fact located at physical
block offset 1.

Fix this problem by using the correct CMS label block location
depending on the device type as determined by the DASD SENSE ID
information.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-07-19 09:22:50 +02:00
Andy Shevchenko
91f06e6680 fs: ldm: don't use own implementation of hex_to_bin()
Remove own implementation of hex_to_bin().

Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Cc: "Richard Russon (FlatCap)" <ldm@flatcap.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 08:07:06 -07:00
Linus Torvalds
e8bebe2f71 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (69 commits)
  fix handling of offsets in cris eeprom.c, get rid of fake on-stack files
  get rid of home-grown mutex in cris eeprom.c
  switch ecryptfs_write() to struct inode *, kill on-stack fake files
  switch ecryptfs_get_locked_page() to struct inode *
  simplify access to ecryptfs inodes in ->readpage() and friends
  AFS: Don't put struct file on the stack
  Ban ecryptfs over ecryptfs
  logfs: replace inode uid,gid,mode initialization with helper function
  ufs: replace inode uid,gid,mode initialization with helper function
  udf: replace inode uid,gid,mode init with helper
  ubifs: replace inode uid,gid,mode initialization with helper function
  sysv: replace inode uid,gid,mode initialization with helper function
  reiserfs: replace inode uid,gid,mode initialization with helper function
  ramfs: replace inode uid,gid,mode initialization with helper function
  omfs: replace inode uid,gid,mode initialization with helper function
  bfs: replace inode uid,gid,mode initialization with helper function
  ocfs2: replace inode uid,gid,mode initialization with helper function
  nilfs2: replace inode uid,gid,mode initialization with helper function
  minix: replace inode uid,gid,mode init with helper
  ext4: replace inode uid,gid,mode init with helper
  ...

Trivial conflict in fs/fs-writeback.c (mark bitfields unsigned)
2010-05-21 19:37:45 -07:00
Cesar Eduardo Barros
cc9106247d fs/partitions: use ADDPART_FLAG_RAID instead of magic number
ADDPART_FLAG_RAID was introduced in commit d18d768, and most places were
converted to use it instead of a hardcoded value. However, some places seem
to have been missed.

Change all of them to the symbolic names via the following semantic patch:

@@
struct parsed_partitions *state;
expression E;
@@
(
- state->parts[E].flags = 1
+ state->parts[E].flags = ADDPART_FLAG_RAID
|
- state->parts[E].flags |= 1
+ state->parts[E].flags |= ADDPART_FLAG_RAID
|
- state->parts[E].flags = 2
+ state->parts[E].flags = ADDPART_FLAG_WHOLEDISK
|
- state->parts[E].flags |= 2
+ state->parts[E].flags |= ADDPART_FLAG_WHOLEDISK
)

Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-21 18:31:21 -04:00
Tejun Heo
b403a98e26 block: improve automatic native capacity unlocking
Currently, native capacity unlocking is initiated only when a
recognized partition extends beyond the end of the disk.  However,
there are several other unhandled cases where truncated capacity can
lead to misdetection of partitions.

* Partition table is fully beyond EOD.

* Partition table is partially beyond EOD (daisy chained ones).

* Recognized partition starts beyond EOD.

This patch updates generic partition check code such that all the
above three cases are handled too.  For the first two, @state tracks
whether low level partition check code tried to read beyond EOD during
partition scan and triggers native capacity unlocking accordingly.
The third is now handled similarly to the original unlocking case.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-21 20:01:03 +02:00
Tejun Heo
1493bf217f block: use struct parsed_partitions *state universally in partition check code
Make the following changes to partition check code.

* Add ->bdev to struct parsed_partitions.

* Introduce read_part_sector() which is a simple wrapper around
  read_dev_sector() which takes struct parsed_partitions *state
  instead of @bdev.

* For functions which used to take @state and @bdev, drop @bdev.  For
  functions which used to take @bdev, replace it with @state.

* While updating, drop superflous checks on NULL state/bdev in ldm.c.

This cleans up the API a bit and enables better handling of IO errors
during partition check as the generic partition check code now has
much better visibility into what went wrong in the low level code
paths.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-21 20:01:02 +02:00
Tejun Heo
c3e33e043f block,ide: simplify bdops->set_capacity() to ->unlock_native_capacity()
bdops->set_capacity() is unnecessarily generic.  All that's required
is a simple one way notification to lower level driver telling it to
try to unlock native capacity.  There's no reason to pass in target
capacity or return the new capacity.  The former is always the
inherent native capacity and the latter can be handled via the usual
device resize / revalidation path.  In fact, the current API is always
used that way.

Replace ->set_capacity() with ->unlock_native_capacity() which take
only @disk and doesn't return anything.  IDE which is the only current
user of the API is converted accordingly.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-21 20:01:02 +02:00
Tejun Heo
56bca01738 block: restart partition scan after resizing a device
Device resize via ->set_capacity() can reveal new partitions (e.g. in
chained partition table formats such as dos extended parts).  Restart
partition scan from the beginning after resizing a device.  This
change also makes libata always revalidate the disk after resize which
makes lower layer native capacity unlocking implementation simpler and
more robust as resize can be handled in the usual path.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-21 20:01:02 +02:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
OGAWA Hirofumi
8e0cc811e0 fs/partition/msdos: fix unusable extended partition for > 512B sector
Smaller size than a minimum blocksize can't be used, after all it's
handled like 0 size.

For extended partition itself, this makes sure to use bigger size than one
logical sector size at least.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Daniel Taylor <Daniel.Taylor@wdc.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-24 16:31:22 -07:00
Daniel Taylor
3fbf586cf7 fs/partitions/msdos: add support for large disks
In order to use disks larger than 2TiB on Windows XP, it is necessary to
use 4096-byte logical sectors in an MBR.

Although the kernel storage and functions called from msdos.c used
"sector_t" internally, msdos.c still used u32 variables, which results in
the ability to handle XP-compatible large disks.

This patch changes the internal variables to "sector_t".

Daniel said: "In the near future, WD will be releasing products that need
this patch".

[hirofumi@mail.parknet.co.jp: tweaks and fix]
Signed-off-by: Daniel Taylor <daniel.taylor@wdc.com>
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-24 16:31:22 -07:00
Martin K. Petersen
e03a72e136 block: Stop using byte offsets
All callers of the stacking functions use 512-byte sector units rather
than byte offsets.  Simplify the code so the stacking functions take
sectors when specifying data offsets.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-01-11 14:30:09 +01:00
Karel Zak
87038c2d5b partitions: read whole sector with EFI GPT header
The size of EFI GPT header is not static, but whole sector is
allocated for the header. The HeaderSize field must be greater
than 92 (= sizeof(struct gpt_header) and must be less than or
equal to the logical block size.

It means we have to read whole sector with the header, because the
header crc32 checksum is calculated according to HeaderSize.

For more details see UEFI standard (version 2.3, May 2009):
  - 5.3.1 GUID Format overview, page 93
  - Table 13. GUID Partition Table Header, page 96

Signed-off-by: Karel Zak <kzak@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-23 09:29:58 +01:00
Karel Zak
7d13af3279 partitions: use sector size for EFI GPT
Currently, kernel uses strictly 512-byte sectors for EFI GPT parsing.
That's wrong.

UEFI standard (version 2.3, May 2009, 5.3.1 GUID Format overview, page
95) defines that LBA is always based on the logical block size. It
means bdev_logical_block_size() (aka BLKSSZGET) for Linux.

This patch removes static sector size from EFI GPT parser.

The problem is reproducible with the latest GNU Parted:

 # modprobe scsi_debug dev_size_mb=50 sector_size=4096

  # ./parted /dev/sdb print
  Model: Linux scsi_debug (scsi)
  Disk /dev/sdb: 52.4MB
  Sector size (logical/physical): 4096B/4096B
  Partition Table: gpt

  Number  Start   End     Size    File system  Name     Flags
   1      24.6kB  3002kB  2978kB               primary
   2      3002kB  6001kB  2998kB               primary
   3      6001kB  9003kB  3002kB               primary

  # blockdev --rereadpt /dev/sdb
  # dmesg | tail -1
   sdb: unknown partition table      <---- !!!

with this patch:

  # blockdev --rereadpt /dev/sdb
  # dmesg | tail -1
   sdb: sdb1 sdb2 sdb3

Signed-off-by: Karel Zak <kzak@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-23 09:29:13 +01:00
Martin K. Petersen
86b3728141 block: Expose discard granularity
While SSDs track block usage on a per-sector basis, RAID arrays often
have allocation blocks that are bigger.  Allow the discard granularity
and alignment to be set and teach the topology stacking logic how to
handle them.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-10 11:50:21 +01:00
Nikanth Karthikesan
316d315bff block: Seperate read and write statistics of in_flight requests v2
Commit a9327cac44 added seperate read
and write statistics of in_flight requests. And exported the number
of read and write requests in progress seperately through sysfs.

But  Corrado Zoccolo <czoccolo@gmail.com> reported getting strange
output from "iostat -kx 2". Global values for service time and
utilization were garbage. For interval values, utilization was always
100%, and service time is higher than normal.

So this was reverted by commit 0f78ab9899

The problem was in part_round_stats_single(), I missed the following:
        if (now == part->stamp)
                return;

-       if (part->in_flight) {
+       if (part_in_flight(part)) {
                __part_stat_add(cpu, part, time_in_queue,
                                part_in_flight(part) * (now - part->stamp));
                __part_stat_add(cpu, part, io_ticks, (now - part->stamp));

With this chunk included, the reported regression gets fixed.

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>

--
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-06 20:16:55 +02:00
Jens Axboe
0f78ab9899 Revert "Seperate read and write statistics of in_flight requests"
This reverts commit a9327cac44.

Corrado Zoccolo <czoccolo@gmail.com> reports:

"with 2.6.32-rc1 I started getting the following strange output from
"iostat -kx 2":
Linux 2.6.31bisect (et2) 	04/10/2009 	_i686_	(2 CPU)

avg-cpu:  %user   %nice %system %iowait  %steal   %idle
          10,70    0,00    3,16   15,75    0,00   70,38

Device:         rrqm/s   wrqm/s     r/s     w/s    rkB/s    wkB/s
avgrq-sz avgqu-sz   await  svctm  %util
sda              18,22     0,00    0,67    0,01    14,77     0,02
43,94     0,01   10,53 39043915,03 2629219,87
sdb              60,89     9,68   50,79    3,04  1724,43    50,52
65,95     0,70   13,06 488437,47 2629219,87

avg-cpu:  %user   %nice %system %iowait  %steal   %idle
           2,72    0,00    0,74    0,00    0,00   96,53

Device:         rrqm/s   wrqm/s     r/s     w/s    rkB/s    wkB/s
avgrq-sz avgqu-sz   await  svctm  %util
sda               0,00     0,00    0,00    0,00     0,00     0,00
0,00     0,00    0,00   0,00 100,00
sdb               0,00     0,00    0,00    0,00     0,00     0,00
0,00     0,00    0,00   0,00 100,00

avg-cpu:  %user   %nice %system %iowait  %steal   %idle
           6,68    0,00    0,99    0,00    0,00   92,33

Device:         rrqm/s   wrqm/s     r/s     w/s    rkB/s    wkB/s
avgrq-sz avgqu-sz   await  svctm  %util
sda               0,00     0,00    0,00    0,00     0,00     0,00
0,00     0,00    0,00   0,00 100,00
sdb               0,00     0,00    0,00    0,00     0,00     0,00
0,00     0,00    0,00   0,00 100,00

avg-cpu:  %user   %nice %system %iowait  %steal   %idle
           4,40    0,00    0,73    1,47    0,00   93,40

Device:         rrqm/s   wrqm/s     r/s     w/s    rkB/s    wkB/s
avgrq-sz avgqu-sz   await  svctm  %util
sda               0,00     0,00    0,00    0,00     0,00     0,00
0,00     0,00    0,00   0,00 100,00
sdb               0,00     4,00    0,00    3,00     0,00    28,00
18,67     0,06   19,50 333,33 100,00

Global values for service time and utilization are garbage. For
interval values, utilization is always 100%, and service time is
higher than normal.

I bisected it down to:
[a9327cac44] Seperate read and write
statistics of in_flight requests
and verified that reverting just that commit indeed solves the issue
on 2.6.32-rc1."

So until this is debugged, revert the bad commit.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-04 21:04:38 +02:00
Alexey Dobriyan
83d5cde47d const: make block_device_operations const
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:25 -07:00
David Brownell
a4dbd6740d driver model: constify attribute groups
Let attribute group vectors be declared "const".  We'd
like to let most attribute metadata live in read-only
sections... this is a start.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15 09:50:47 -07:00
Nikanth Karthikesan
a9327cac44 Seperate read and write statistics of in_flight requests
Currently, there is a single in_flight counter measuring the number of
requests in the request_queue. But some monitoring tools would like to
know how many read requests and write requests are in progress. Split the
current in_flight counter into two seperate counters for read and write.

This information is exported as a sysfs attribute, as changing the
currently available stat files would break the existing tools.

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-14 08:24:52 +02:00
Heiko Carstens
f8c73c790c partitions: fix broken uevent_suppress conversion
git commit f67f129e "Driver core: implement uevent suppress in kobject"
contains this chunk for fs/partitions/check.c:

 	/* suppress uevent if the disk supresses it */
-	if (!ddev->uevent_suppress)
+	if (!dev_get_uevent_suppress(pdev))
 		kobject_uevent(&pdev->kobj, KOBJ_ADD);

However that should have been

-	if (!ddev->uevent_suppress)
+	if (!dev_get_uevent_suppress(ddev))

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Ming Lei <tom.leiming@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-12 13:02:09 -07:00
Linus Torvalds
d614aec475 Merge branch 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
* 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (29 commits)
  ide: re-implement ide_pci_init_one() on top of ide_pci_init_two()
  ide: unexport ide_find_dma_mode()
  ide: fix PowerMac bootup oops
  ide: skip probe if there are no devices on the port (v2)
  sl82c105: add printk() logging facility
  ide-tape: fix proc warning
  ide: add IDE_DFLAG_NIEN_QUIRK device flag
  ide: respect quirk_drives[] list on all controllers
  hpt366: enable all quirks for devices on quirk_drives[] list
  hpt366: sync quirk_drives[] list with pdc202xx_{new,old}.c
  ide: remove superfluous SELECT_MASK() call from do_rw_taskfile()
  ide: remove superfluous SELECT_MASK() call from ide_driveid_update()
  icside: remove superfluous ->maskproc method
  ide-tape: fix IDE_AFLAG_* atomic accesses
  ide-tape: change IDE_AFLAG_IGNORE_DSC non-atomically
  pdc202xx_old: kill resetproc() method
  pdc202xx_old: don't call pdc202xx_reset() on IRQ timeout
  pdc202xx_old: use ide_dma_test_irq()
  ide: preserve Host Protected Area by default (v2)
  ide-gd: implement block device ->set_capacity method (v2)
  ...
2009-06-12 09:29:42 -07:00
Bartlomiej Zolnierkiewicz
db429e9ec0 partitions: add ->set_capacity block device method
* Add ->set_capacity block device method and use it in rescan_partitions()
  to attempt enabling native capacity of the device upon detecting the
  partition which exceeds device capacity.

* Add GENHD_FL_NATIVE_CAPACITY flag to try limit attempts of enabling
  native capacity during partition scan.

Together with the consecutive patch implementing ->set_capacity method in
ide-gd device driver this allows automatic disabling of Host Protected Area
(HPA) if any partitions overlapping HPA are detected.

Cc: Robert Hancock <hancockrwd@gmail.com>
Cc: Frans Pop <elendil@planet.nl>
Cc: "Andries E. Brouwer" <Andries.Brouwer@cwi.nl>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Emphatically-Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-07 13:52:52 +02:00
Bartlomiej Zolnierkiewicz
02c33b123e partitions: warn about the partition exceeding device capacity
The current warning message says only about the kernel's action taken
without mentioning the underlying reason behind it.

Noticed-by: Robert Hancock <hancockrwd@gmail.com>
Cc: Frans Pop <elendil@planet.nl>
Cc: "Andries E. Brouwer" <Andries.Brouwer@cwi.nl>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Emphatically-Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-07 13:52:51 +02:00
Martin K. Petersen
c72758f337 block: Export I/O topology for block devices and partitions
To support devices with physical block sizes bigger than 512 bytes we
need to ensure proper alignment.  This patch adds support for exposing
I/O topology characteristics as devices are stacked.

  logical_block_size is the smallest unit the device can address.

  physical_block_size indicates the smallest I/O the device can write
  without incurring a read-modify-write penalty.

  The io_min parameter is the smallest preferred I/O size reported by
  the device.  In many cases this is the same as the physical block
  size.  However, the io_min parameter can be scaled up when stacking
  (RAID5 chunk size > physical block size).

  The io_opt characteristic indicates the optimal I/O size reported by
  the device.  This is usually the stripe width for arrays.

  The alignment_offset parameter indicates the number of bytes the start
  of the device/partition is offset from the device's natural alignment.
  Partition tools and MD/DM utilities can use this to pad their offsets
  so filesystems start on proper boundaries.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22 23:22:55 +02:00
Martin K. Petersen
e1defc4ff0 block: Do away with the notion of hardsect_size
Until now we have had a 1:1 mapping between storage device physical
block size and the logical block sized used when addressing the device.
With SATA 4KB drives coming out that will no longer be the case.  The
sector size will be 4KB but the logical block size will remain
512-bytes.  Hence we need to distinguish between the physical block size
and the logical ditto.

This patch renames hardsect_size to logical_block_size.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22 23:22:54 +02:00
Ingo Molnar
8302294f43 Merge branch 'tracing/core-v2' into tracing-for-linus
Conflicts:
	include/linux/slub_def.h
	lib/Kconfig.debug
	mm/slob.c
	mm/slub.c
2009-04-02 00:49:02 +02:00
Linus Torvalds
21cdbc1378 Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (81 commits)
  [S390] remove duplicated #includes
  [S390] cpumask: use mm_cpumask() wrapper
  [S390] cpumask: Use accessors code.
  [S390] cpumask: prepare for iterators to only go to nr_cpu_ids/nr_cpumask_bits.
  [S390] cpumask: remove cpu_coregroup_map
  [S390] fix clock comparator save area usage
  [S390] Add hwcap flag for the etf3 enhancement facility
  [S390] Ensure that ipl panic notifier is called late.
  [S390] fix dfp elf hwcap/facility bit detection
  [S390] smp: perform initial cpu reset before starting a cpu
  [S390] smp: fix memory leak on __cpu_up
  [S390] ipl: Improve checking logic and remove switch defaults.
  [S390] s390dbf: Remove needless check for NULL pointer.
  [S390] s390dbf: Remove redundant initilizations.
  [S390] use kzfree()
  [S390] BUG to BUG_ON changes
  [S390] zfcpdump: Prevent zcore from beeing built as a kernel module.
  [S390] Use csum_partial in checksum.h
  [S390] cleanup lowcore.h
  [S390] eliminate ipl_device from lowcore
  ...
2009-03-26 16:04:22 -07:00
Stefan Weinhuber
b44b0ab3ba [S390] dasd: add large volume support
The dasd device driver will now support ECKD devices with more then
65520 cylinders.
In the traditional ECKD adressing scheme each track is addressed
by a 16-bit cylinder and 16-bit head number. The new addressing
scheme makes use of the fact that the actual number of heads is
never larger then 15, so 12 bits of the head number can be redefined
to be part of the cylinder address.

Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-03-26 15:24:05 +01:00
Ming Lei
f67f129e51 Driver core: implement uevent suppress in kobject
This patch implements uevent suppress in kobject and removes it
from struct device, based on the following ideas:

1,Uevent sending should be one attribute of kobject, so suppressing it
in kobject layer is more natural than in device layer. By this way,
we can do it for other objects embedded with kobject.

2,It may save several bytes for each instance of struct device.(On my
omap3(32bit ARM) based box, can save 8bytes per device object)

This patch also introduces dev_set|get_uevent_suppress() helpers to
set and query uevent_suppress attribute in case to help kobject
as private part of struct device in future.

[This version is against the latest driver-core patch set of Greg,please
ignore the last version.]

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:38:26 -07:00
Arnaldo Carvalho de Melo
157f9c00e8 tracing/blktrace: fix up checkpatch reported problems in ftrace plugin patch
Also make sure sparse (make C=2 block/blktrace.o) is happy too.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-26 18:30:01 +01:00
Arnaldo Carvalho de Melo
c71a896154 blktrace: add ftrace plugin
Impact: New way of using the blktrace infrastructure

This drops the requirement of userspace utilities to use the blktrace
facility.

Configuration is done thru sysfs, adding a "trace" directory to the
partition directory where blktrace can be enabled for the associated
request_queue.

The same filters present in the IOCTL interface are present as sysfs
device attributes.

The /sys/block/sdX/sdXN/trace/enable file allows tracing without any
filters.

The other files in this directory: pid, act_mask, start_lba and end_lba
can be used with the same meaning as with the IOCTL interface.

Using the sysfs interface will only setup the request_queue->blk_trace
fields, tracing will only take place when the "blk" tracer is selected
via the ftrace interface, as in the following example:

To see the trace, one can use the /d/tracing/trace file or the
/d/tracign/trace_pipe file, with semantics defined in the ftrace
documentation in Documentation/ftrace.txt.

[root@f10-1 ~]# cat /t/trace
       kjournald-305   [000]  3046.491224:   8,1    A WBS 6367 + 8 <- (8,1) 6304
       kjournald-305   [000]  3046.491227:   8,1    Q   R 6367 + 8 [kjournald]
       kjournald-305   [000]  3046.491236:   8,1    G  RB 6367 + 8 [kjournald]
       kjournald-305   [000]  3046.491239:   8,1    P  NS [kjournald]
       kjournald-305   [000]  3046.491242:   8,1    I RBS 6367 + 8 [kjournald]
       kjournald-305   [000]  3046.491251:   8,1    D  WB 6367 + 8 [kjournald]
       kjournald-305   [000]  3046.491610:   8,1    U  WS [kjournald] 1
          <idle>-0     [000]  3046.511914:   8,1    C  RS 6367 + 8 [6367]
[root@f10-1 ~]#

The default line context (prefix) format is the one described in the ftrace
documentation, with the blktrace specific bits using its existing format,
described in blkparse(8).

If one wants to have the classic blktrace formatting, this is possible by
using:

[root@f10-1 ~]# echo blk_classic > /t/trace_options
[root@f10-1 ~]# cat /t/trace
  8,1    0  3046.491224   305  A WBS 6367 + 8 <- (8,1) 6304
  8,1    0  3046.491227   305  Q   R 6367 + 8 [kjournald]
  8,1    0  3046.491236   305  G  RB 6367 + 8 [kjournald]
  8,1    0  3046.491239   305  P  NS [kjournald]
  8,1    0  3046.491242   305  I RBS 6367 + 8 [kjournald]
  8,1    0  3046.491251   305  D  WB 6367 + 8 [kjournald]
  8,1    0  3046.491610   305  U  WS [kjournald] 1
  8,1    0  3046.511914     0  C  RS 6367 + 8 [6367]
[root@f10-1 ~]#

Using the ftrace standard format allows more flexibility, such
as the ability of asking for backtraces via trace_options:

[root@f10-1 ~]# echo noblk_classic > /t/trace_options
[root@f10-1 ~]# echo stacktrace > /t/trace_options

[root@f10-1 ~]# cat /t/trace
       kjournald-305   [000]  3318.826779:   8,1    A WBS 6375 + 8 <- (8,1) 6312
       kjournald-305   [000]  3318.826782:
 <= submit_bio
 <= submit_bh
 <= sync_dirty_buffer
 <= journal_commit_transaction
 <= kjournald
 <= kthread
 <= child_rip
       kjournald-305   [000]  3318.826836:   8,1    Q   R 6375 + 8 [kjournald]
       kjournald-305   [000]  3318.826837:
 <= generic_make_request
 <= submit_bio
 <= submit_bh
 <= sync_dirty_buffer
 <= journal_commit_transaction
 <= kjournald
 <= kthread

Please read the ftrace documentation to use aditional, standardized
tracing filters such as /d/tracing/trace_cpumask, etc.

See also /d/tracing/trace_mark to add comments in the trace stream,
that is equivalent to the /d/block/sdaN/msg interface.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-26 14:40:53 +01:00
Neil Brown
54b0d12769 block: fix bug in ptbl lookup cache
Neil writes:

   Hi Jens,

    I've found a little bug for you.  It was introduced by
        a6f23657d3

        block: add one-hit cache for disk partition lookup

    and has the effect of killing my machine whenever I try to assemble
    an md array :-(
    One of the devices in the array has partitions, and mdadm always
    deletes partitions before putting a whole-device in an array (as it
    can cause confusion).  The next IO to that device locks the machine.
    I don't really understand exactly why it locks up, but it happens in
    disk_map_sector_rcu().  This patch fixes it.

Which is due to a missing clear of the (now) stale partition lookup
data. So clear that when we delete a partition.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-01-09 21:46:13 +01:00
Kay Sievers
3ada8b7e98 block: struct device - replace bus_id with dev_name(), dev_set_name()
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-06 10:44:43 -08:00
Tejun Heo
55e8e30c38 block/md: fix md autodetection
Block ext devt conversion missed md_autodetect_dev() call in
rescan_partitions() leaving md autodetect unable to see partitions.
Fix it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-11-18 15:08:56 +01:00
Tejun Heo
ba32929a91 block: make add_partition() return pointer to hd_struct
Make add_partition() return pointer to the new hd_struct on success
and ERR_PTR() value on failure.  This change will be used to fix md
autodetection bug.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-11-18 15:08:56 +01:00
Tejun Heo
eb60fa1066 block: fix add_partition() error path
Partition stats structure was not freed on devt allocation failure
path.  Fix it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-11-18 15:08:55 +01:00
Al Viro
572c489215 [PATCH] sanitize blkdev_get() and friends
* get rid of fake struct file/struct dentry in __blkdev_get()
* merge __blkdev_get() and do_open()
* get rid of flags argument of blkdev_get()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:49:06 -04:00
Al Viro
9a1c354276 [PATCH] pass fmode_t to blkdev_put()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:48:58 -04:00
Tejun Heo
0fc71e3d65 block: add partition attribute for partition number
With extended devt, finding out the partition number becomes a bit
more challenging as subtracting the minor number from that of the
parent device doesn't work anymore.  The only thing left is parsing
the partition name which is brittle and not exactly universal (some
have '-' between the device name and partition number while others
don't).  This patch introduced partition attribute which contains the
partition number of the device.  This should make finding partitions
and its index easier.

This problem and solution were suggested by H. Peter Anvin.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-17 08:46:56 +02:00
Kay Sievers
ac0d86f580 block: sanitize invalid partition table entries
We currently follow blindly what the partition table lies about the
disk, and let the kernel create block devices which can not be accessed.
Trying to identify the device leads to kernel logs full of:
  sdb: rw=0, want=73392, limit=28800
  attempt to access beyond end of device

Here is an example of a broken partition table, where sda2 starts
behind the end of the disk, and sdb3 is larger than the entire disk:
  Disk /dev/sdb: 14 MB, 14745600 bytes
  1 heads, 29 sectors/track, 993 cylinders, total 28800 sectors
     Device Boot      Start         End      Blocks   Id  System
  /dev/sdb1              29        7800        3886   83  Linux
  /dev/sdb2           37801       45601        3900+  83  Linux
  /dev/sdb3           15602       73402       28900+  83  Linux
  /dev/sdb4           23403       28796        2697   83  Linux

The kernel creates these completely invalid devices, which can not be
accessed, or may lead to other unpredictable failures:
  grep . /sys/class/block/sdb*/{start,size}
  /sys/class/block/sdb/size:28800
  /sys/class/block/sdb1/start:29
  /sys/class/block/sdb1/size:7772
  /sys/class/block/sdb2/start:37801
  /sys/class/block/sdb2/size:7801
  /sys/class/block/sdb3/start:15602
  /sys/class/block/sdb3/size:57801
  /sys/class/block/sdb4/start:23403
  /sys/class/block/sdb4/size:5394

With this patch, we ignore partitions which start behind the end of the disk,
and limit partitions to the end of the disk if they pretend to be larger:
  grep . /sys/class/block/sdb*/{start,size}
  /sys/class/block/sdb/size:28800
  /sys/class/block/sdb1/start:29
  /sys/class/block/sdb1/size:7772
  /sys/class/block/sdb3/start:15602
  /sys/class/block/sdb3/size:13198
  /sys/class/block/sdb4/start:23403
  /sys/class/block/sdb4/size:5394

These warnings are printed to the kernel log:
  sdb: p2 ignored, start 37801 is behind the end of the disk
  sdb: p3 size 57801 limited to end of disk

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 11:21:47 -07:00
Adrian Bunk
6722e45c2d fs/partitions/acorn.c: remove dead code
I missed this when I did the arm26 removal.

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 11:21:47 -07:00
Andrew Patterson
9bc3ffbfbd Check for device resize when rescanning partitions
Check for device resize in the rescan_partitions() routine. If the device
has been resized, the bdev size is set to match. The rescan_partitions()
routine is called when opening the device and when calling the
BLKRRPART ioctl.

Signed-off-by: Andrew Patterson <andrew.patterson@hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:12 +02:00
Tejun Heo
3e1a7ff8a0 block: allow disk to have extended device number
Now that disk and partition handlings are mostly unified, it's easy to
allow disk to have extended device number.  This patch makes
add_disk() use extended device number if disk->minors is zero.  Both
sd and ide-disk are updated to use this.

* sd_format_disk_name() is implemented which can generically determine
  the drive name.  This removes disk number restriction stemming from
  limited device names.

* If sd index goes over SD_MAX_DISKS (which can be increased now BTW),
  sd simply doesn't initialize minors letting block layer choose
  extended device number.

* If CONFIG_DEBUG_EXT_DEVT is set, both sd and ide-disk always set
  minors to 0 and use extended device numbers.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:08 +02:00
Tejun Heo
689d6fac40 block: replace @ext_minors with GENHD_FL_EXT_DEVT
With previous changes, it's meaningless to limit the number of
partitions.  Replace @ext_minors with GENHD_FL_EXT_DEVT such that
setting the flag allows the disk to have maximum number of allowed
partitions (only limited by the number of entries in parsed_partitions
as determined by MAX_PART constant).

This kills not-too-pretty alloc_disk_ext[_node]() functions and makes
@minors parameter to alloc_disk[_node]() unnecessary.  The parameter
is left alone to avoid disturbing the users.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:08 +02:00
Tejun Heo
540eed5637 block: make partition array dynamic
disk->__part used to be statically allocated to the maximum possible
number of partitions.  This patch makes partition array allocation
dynamic.  The added overhead is minimal as only real change is one
memory dereference changed to RCU one.  This saves both a bit of
memory and cpu cycles iterating through unoccupied slots and makes
increasing partition limit easier.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:08 +02:00
Tejun Heo
074a7aca7a block: move stats from disk to part0
Move stats related fields - stamp, in_flight, dkstats - from disk to
part0 and unify stat handling such that...

* part_stat_*() now updates part0 together if the specified partition
  is not part0.  ie. part_stat_*() are now essentially all_stat_*().

* {disk|all}_stat_*() are gone.

* part_round_stats() is updated similary.  It handles part0 stats
  automatically and disk_round_stats() is killed.

* part_{inc|dec}_in_fligh() is implemented which automatically updates
  part0 stats for parts other than part0.

* disk_map_sector_rcu() is updated to return part0 if no part matches.
  Combined with the above changes, this makes NULL special case
  handling in callers unnecessary.

* Separate stats show code paths for disk are collapsed into part
  stats show code paths.

* Rename disk_stat_lock/unlock() to part_stat_lock/unlock()

While at it, reposition stat handling macros a bit and add missing
parentheses around macro parameters.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:08 +02:00
Tejun Heo
eddb2e26b5 block: kill GENHD_FL_FAIL and use part0->make_it_fail
GENHD_FL_FAIL for disk is what make_it_fail is for parts.  Kill it and
use part0->make_it_fail.  Sysfs node handling is unified too.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:08 +02:00
Tejun Heo
0762b8bde9 block: always set bdev->bd_part
Till now, bdev->bd_part is set only if the bdev was for parts other
than part0.  This patch makes bdev->bd_part always set so that code
paths don't have to differenciate common handling.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:08 +02:00
Tejun Heo
4c46501d16 block: move holder_dir from disk to part0
Move disk->holder_dir to part0->holder_dir.  Kill now mostly
superflous bdev_get_holder().

While at it, kill superflous kobject_get/put() around holder_dir,
slave_dir and cmd_filter creation and collapse
disk_sysfs_add_subdirs() into register_disk().  These serve no purpose
but obfuscating the code.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:08 +02:00